Napex acupoint thread-embedding combined with metoprolol tartrate tablet for prophylactic treatment of migraine without aura: a randomized controlled trial. / æž•é¡¹éƒ¨åŸ‹çº¿æ³•è”åˆé ’çŸ³é ¸ç¾Žæ‰˜æ´›å°”ç‰‡é¢„é˜²æ€§æ²»ç–—æ— å ˆå †åå¤´ç—›ï¼šéšæœºå¯¹ç §è¯•éªŒ.

OBJECTIVES: To observe the efficacy of napex acupoint thread-embedding combined with metoprolol tartrate tablet for prophylactic treatment of migraine without aura, and to compare its efficacy with simple napex acupoint thread-embedding and simple metoprolol tartrate tablet. METHODS: A total of 105 patients with migraine without aura were randomized into a combination group (35 cases, 5 cases dropped out), a thread-embedding group (35 cases, 4 cases dropped out) and a western medication group (35 cases, 2 cases dropped out). In the thread-embedding group, napex acupoint thread-embedding was applied at bilateral Fengchi (GB 20) and points of 1.5 cun nearby to the lower edge of spinous process of cervical 2. In the western medication group, metoprolol tartrate tablet was given orally, 12.5 mg a time, twice a day. In the combination group, napex acupoint thread-embedding combined with oral metoprolol tartrate tablet was delivered. The treatment of 8 weeks was required in the 3 groups. The days of headache attacks, frequency of headache attacks, headache severity (visual analogue scale [VAS] score) and the migraine specific quality of life questionnaire version 2.1 (MSQ) score were observed during baseline period (4 weeks before treatment to before treatment), observation period (1-4 weeks and 5-8 weeks in treatment) and follow-up period (1-4 weeks after treatment completion) respectively, the proportions of the days of headache attacks/frequency of headache attacks relieved by 50% were calculated, and the safety was evaluated in the 3 groups. RESULTS: During the observation period and the follow-up period, the days of headache attacks, frequency of headache attacks and headache VAS scores in the 3 groups were reduced compared with those of the baseline period (P<0.05). During the observation period and the follow-up period, the days of headache attacks and the frequency of headache attacks in the combination group were lower than those in the thread-embedding group and the western medication group (P<0.05); during the observation period (1-4 weeks in treatment), the headache VAS scores in the combination group and the thread-embedding group were lower than that in the western medication group (P<0.05); during the observation period (5-8 weeks in treatment) and the follow-up period, the headache VAS scores in the combination group were lower than those in the thread-embedding group and the western medication group (P<0.05). During the observation period and the follow-up period, the scores of role restriction, role prevention and emotion function of MSQ in the combination group were increased compared with those of the baseline period (P<0.05); during the observation period (5-8 weeks in treatment) and the follow-up period, the role prevention scores of MSQ in the thread-embedding group and the western medication group were increased compared with those of the baseline period (P<0.05); during the follow-up period, the emotion function scores of MSQ in the thread-embedding group and the western medication group were increased compared with those of the baseline period (P<0.05). During the observation period and the follow-up period, the scores of role restriction, role prevention and emotion function of MSQ in the combination group were higher than those in the thread-embedding group and the western medication group (P<0.05). There was no statistical difference in the proportions of the days of headache attacks/frequency of headache attacks relieved by 50% among the 3 groups (P>0.05), and there were no serious adverse reactions in the 3 groups. CONCLUSIONS: Napex acupoint thread-embedding combined with metoprolol tartrate tablet, simple napex acupoint thread-embedding and simple metoprolol tartrate tablet all can reduce the days of headache attacks and the frequency of headache attacks, relieve headache severity and improve the quality of life in patients with migraine without aura. Napex acupoint thread-embedding combined with metoprolol tartrate tablet has a better effect.

Spatially confining copper nanoclusters in porous ZrO2 for fluorescence/colorimetry/smartphone triple-mode detection of metoprolol tartrate.

Sensitive detection of metoprolol tartrate (MPT) is extremely urgent in the therapy of cardiovascular diseases to guarantee the curative effectiveness. Herein, porous ZrO2 was first employed as a matrix to spatially confine CuNCs (ZrO2@CuNCs), which simultaneously ameliorated the emission intensity and stability of CuNCs. Benefiting from the inner filter effect (IFE) and dynamic quenching effect (DQE) between ZrO2@CuNCs and AuNPs and the color fading of AuNPs induced by MPT, fluorometric and colorimetric methods for simple and sensitive determination of MPT were proposed. Besides, to meet the demand of convenient detection of MPT, a portable sensing platform was constructed including a dark box produced by a 3D printer and a smartphone. This method was further employed to determine MPT in human serum and urine samples with satisfactory results with the triple mode. This work is the first attempt to fabricate a multi-mode optical and portable sensor for MPT detection, which provides a novel approach for point-of-care monitoring of drugs in the treatment of diseases.

Preparation of 3D printed metoprolol tartrate chewable tablets and optimization of printing process / 药学学报

With the growing demand of personalized medicine for children, it is especially important to develop medicines for children. In this study, using metoprolol tartrate as model drug, we developed 3D printed chewable tablets suitable for children with automated dosage distribution using semi-solid extruded (SSE) 3D printing technology. Based on the quality by design concept, this study prepared a semi-solid material with good printability using gelatin as the substrate, constructed 3D models and printed tablets with the aid of computer-aided design. The printing parameters were optimized and determined as follows: print temperature of 35-37 ℃, print speed of 25 mm·s-1, fill rate of 15%, and number of outer profile layers of 2. Subsequently, the printing process and the quality uniformity of the tablets were verified, and a linear relationship between the dose and the number of model layers was obtained. Finally, 3D printed chewable tablets were superior in terms of appearance, dose accuracy and compliance compared with traditional split-dose commercially available tablets. In this study, 3D printed metoprolol tartrate chewable tablets with good performance were successfully prepared to address the personalized medication needs of pediatric patients.

Development and Comprehensive Characteristics of Thermosensitive Liquid Suppositories of Metoprolol Based on Poly(lactide-co-glycolide) Nanoparticles.

Thermosensitive liquid suppositories (LSs) carrying the model antihypertensive drug metoprolol tartrate (MT) were developed and evaluated. The fundamental purpose of this work was to produce, for the first time, liquid MT suppositories based on biodegradable nanoparticles and optimize their rheological and mechanical properties for prospective rectal administration. The nanoparticle system was based on a biodegradable copolymer synthesized by ring opening polymerization (ROP) of glycolide (GL) and L,L-lactide (LLA). Biodegradable nanoparticles loaded with the model drug were produced by the o/o method at the first stage of the investigation. Depending on the concentration of the drug in the sample, from 66 to 91% of MT was released over 12 h, according to first-order kinetics. Then, thermosensitive LSs with MT-loaded biodegradable nanoparticles were obtained by a cold method and their mechanical and rheological properties were evaluated. To adjust the thermogelling and mucoadhesive properties for rectal administration, the amounts of major formulation components such as poloxamers (P407, P188), Tween 80, hydroxypropylcellulose (HPC), polyvinylpyrrolidone (PVP), and sodium alginate were optimized. The in vitro release results revealed that more than 80% of the MT was released after 12 h, following also first-order kinetics. It was discovered that the diffusion process was dominant. The drug release profile was mainly governed by the rheological and mechanical properties of the developed formulation. Such a novel, thermosensitive formulation might be an effective alternative to hypertension treatment, particularly for unconscious patients, patients with mental illnesses, geriatric patients, and children.

Efficacy and safety of Wenxin Keli combined with metoprolol tartrate in the treatment of premature ventricular contractions: A systematic review and meta-analysis.

Background: Wenxin Keli (WXKL) has good clinical value in the treatment of premature ventricular contractions, but there is insufficient evidence to support it. This study evaluates the efficacy and safety of WXKL combined with metoprolol tartrate in the treatment of ventricular premature beats (VPCs). Methods: We searched seven databases to identify randomized controlled trials (RCTs) for this study. Two reviewers independently screened and extracted the data. The Cochrane Manual criteria were used for methodological quality assessment. Meta-analyses were performed using Review Manager 5.4.1 software. Risk ratios (RR) were used for effect sizes for dichotomous data, demonstrated in effect sizes and 95% confidence intervals (CIs). Results: A total of 11 RCTs of WXKL combined with metoprolol tartrate in the treatment of premature ventricular contractions were included in this study. Meta-analysis showed that WXKL combined with metoprolol tartrate (treatment group) was more effective than metoprolol tartrate (control group) in improving premature ventricular contractions (RR = 1.32, 95% CI: [1.24, 1.40], P < 0.00001); significantly improved the rate of premature ventricular contractions (RR = 1.32, 95% CI: [1.23, 1.41], P < 0.00001); there was no difference in adverse drug reactions compared with the control group (RR = 0.61, 95% CI: [0.35, 0.1.05], P = 0.08), but the number of adverse reactions (n = 18) was less than that of the control group (n = 32), and the severity was lower than that of the control group. The included studies only mentioned randomization and did not describe the generation of random sequences in detail. Conclusion: This study found that Wenxin Keli combined with metoprolol tartrate in the treatment of premature ventricular contractions increased the efficacy of the drug, reduced the occurrence of adverse reactions, and reduced the severity of adverse reactions. Due to the quality limitations of the included studies, more high-quality RCTs are needed in the future to provide more evidence for longer-term analyses.

Role of hesperidin and fresh orange juice in altering the bioavailability of beta-blocker, metoprolol tartrate. An in vivo model.

The aim of my study was to find the effect of co-administrating orange juice and hesperidin on the bioavailability of metoprolol tartrate in rabbits.Metoprolol tartrate (10 mg/kg) was given orally to rabbits with hesperidin (10 mg/kg) and with orange juice (6 mL/kg) separately.The plasma concentrations of metoprolol tartrate were determined using reverse phase-high performance liquid chromatography at 1.5, 1, 2, 4, and 6 h, and the pharmacokinetic parameters were studied.In comparison to the control group, the AUC of metoprolol tartrate was increased significantly by 68.32% with hesperidin while orange juice substantially reduced the AUC by 37.08%. However, no significant change was observed in Tmax, Kel, and Vd in both groups. The relative bioavailability of metoprolol tartrate with hesperidin was 168.3% as compared to orange juice, that is, 62.9%.The present study revealed that the concurrent intake of hesperidin with metoprolol tartrate increased its bioavailability while orange juice administration suppressed its bioavailability. The change in bioavailability of metoprolol tartrate might be due to alterations in the activity of cytochrome P450 enzymes involved in the metabolism of metoprolol tartrate. However, the exact mechanism is still not known. These interactions may be of clinical significance.

Quality control and drug-drug interactions between commercially available Metoprolol and Glimepiride tablets

Abstract Quality is paramount and needs to be maintained throughout the shelf life of pharmaceuticals. The current study aimed to evaluate the quality, potency, and drug-drug interaction in an in vivo animal model by using two drugs, namely, metoprolol and glimepiride. Tablets were selected for their physical characteristics, such as shape, size, and color. Quality control tests, such as weight variation, hardness, friability, and disintegration tests, and invitro drug release studies were performed as per USP. Drug-drug interaction and in vivo studies were carried out according to the standard protocol of the animal ethics committee. Quality control tests of both the tablets were within the specified range. The cumulative release percentages of the drugs were 81.12% and 85.36% for Metoprolol Tartrate and Glimepiride, respectively, in a physiological buffer solution within 1 h. The combination of metoprolol and Glimepiride also significantly decreased the blood glucose level in diabetic animals. However, the blood glucose level increased in the group receiving metoprolol only, but the difference was not significant. The result suggested that the formulations are safe. However, the chronic use of this combination requires frequent monitoring of blood glucose level to improve its efficacy and for the patient's safety.

Exploration and evaluation of dynamic dose-control platform for pediatric medicine based on Drop-on-Powder 3D printing technology.

Patient responses to doses vary widely, and affording limited doses to such a diverse population will inevitably yield unsatisfactory therapeutic effects and even adverse effects. In Particular, there is an urgent demand for a dynamic dose-control platform for pediatric patients, many of whom require diverse doses and flexible dose adjustments. The aim of this study was to explore the possibility of using a drop-on-powder (DoP) technology-based desktop 3D printer to build a dynamic dose-control platform for theophylline (TP) and metoprolol tartrate (MT). In addition, the impact of drug loading patterns on the accuracy of dose regulation was also assessed. All of the printed tablets exhibited good mechanical properties and satisfactory structural integrity. On printing tablets with target drug doses, the accuracy was in the range of 91.2~108% with a small variation coefficient in the range of 0.5~3.2%. Compared with traditional divided-dose methods, drop-on-powder 3D printing technology exhibited higher accuracy in dose regulation, but had less impact on the in vitro drug release behavior. The results in this work clearly indicate the possibility and ability of DoP technology as a promising method for constructing a dynamic dose-control platform for the fabrication of personalized medicines for pediatric patients.

Fundamental Investigations into Metoprolol Tartrate Deposition on Orodispersible Films by Inkjet Printing for Individualised Drug Dosing.

Individualised medicine is continuously gaining attention in pharmaceutical research. New concepts and manufacturing technologies are required to realise this therapeutic approach. Off-label drugs used in paediatrics, such as metoprolol tartrate (MPT), are potential candidates for innovations in this context. Orodispersible films (ODFs) have been shown as an accepted alternative dosage form during the last years and inkjet printing is traded as seminal technology of precise deposition of active pharmaceutical ingredients (APIs). The objective of this study was to combine both technologies by developing imprinted ODFs based on hypromellose with therapeutically reasonable MPT single doses of 0.35 to 3.5 mg for paediatric use. After preselection, suitable ink compositions were analysed by confocal Raman microscopy regarding MPT distribution within the imprinted ODFs. Adjusted print settings, speed, print direction and angle, characterised the final ODF surface structure. The present investigations show that uniform dosages with acceptance values between 1 and 6 can be achieved. Nevertheless, changes in calibrated printed quantity due to nozzle aging have a significant effect on the final applied dose. At the lowest investigated quantity, the RSD was ±28% and at the highest, ±9%. This has to be considered for implementation of inkjet printing as a pharmaceutical production tool in the future.

Assessment of the safety of intravitreal injection of metoprolol tartrate in rabbits.

PURPOSE: To verify the safety of different doses of intravitreal metoprolol tartrate (MT) after intravitreal injection in rabbit eyes. METHODS: Animals were randomly assigned into 2 groups: group I received 50 µg of MT and group II 100 µg of MT. A volume of 0.05 mL of the drug solution was administered through an intravitreal injection, while the control eyes received an equal volume of saline solution. Safety was assessed by clinical observation, electroretinography (ERG) and histological evaluation. RESULTS: No evidence of clinical toxicity was observed. ERG waveforms from the MT treated eyes were similar to those recorded from the control eyes in dark-adapted state, amplitude and the implicit time are similar between the groups in light-adapted state, and their retinas had no signs of toxicity by histological evaluation 7 days after intravitreal injection. CONCLUSIONS: The intravitreal use of metoprolol at 50 and 100 µg dosages does not cause short-term retinal toxicity in rabbits.

Development of a RP-HPLC method for simultaneous determination of reference markers used for in-situ rat intestinal permeability studies.

One of the most common techniques for assessing the intestinal absorption characteristics of drugs is single-pass intestinal perfusion (SPIP) method. Metoprolol tartrate (MT, reference standard) and phenol red (PR, zero permeability marker) are the compounds that are normally used in SPIP studies. The aim of this study was to develop a reverse phase high-performance liquid chromatography (RP-HPLC) method combined with UV-detection for the simultaneous determination of MT and PR in the perfusion medium used in SPIP experiments. Elution was performed using a Restek Raptor C18 column (5 µm, 4.6 mm × 250) at a temperature of 25 °C. The mixture of the mobile phase consisted of (MeOH):(Phosphate buffer solution, PBS), (20 mM, pH 3.0 adjusted with ortho-phosphoric acid),(55:45, v/v). Flow rate and column temperature were set at 1.2 mL min-1 and 25 °C, respectively. MT and PR were injected as 20 µL into the HPLC system. UV detection was performed at 227 nm. The obtained retention times were reported as 2.89 and 3.80 min for MT and PR, respectively. The developed RP-HPLC method was validated according to Q2(R1) guideline of The International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use (ICH). The method was linear within the range of 2-50 µg mL-1 for PR and 10-75 µg mL-1 for MT. The developed RP-HPLC method was successfully applied on determination of MT and PR in perfusion medium. The developed method could be helpful for researchers working on in-situ rat intestinal permeability studies and it could be easily modified on further studies.

Advancing USP compendial methods for fixed dose combinations: A case study of metoprolol tartrate and hydrochlorothiazide tablets.

The current United States Pharmacopeia-National Formulary (USP-NF) includes more than 250 monographs of fixed dose combinations (FDCs), and some of them need to be updated due to incompleteness of impurity profiles and obsolescence of analytical methodologies. A case study of metoprolol tartrate and hydrochlorothiazide tablets is presented to summarize challenges encountered during the USP monograph modernization initiative of FDCs and to highlight an "adoption and adaptation" approach employed for method development. To this end, a single stability-indicating HPLC method was developed to separate the two drug substances and eight related compounds with resolution 2.0 or higher between all critical pairs. Chromatographic separations were achieved on a Symmetry column (C18, 100 mm × 4.6 mm, 3.5 µm) using sodium phosphate buffer (pH 3.0; 34 mM) and acetonitrile as mobile phase in a gradient elution mode. The stability-indicating capability of this method has been demonstrated by analyzing stressed samples of the two drug substances. The developed HPLC method was validated for simultaneous determination of metoprolol tartrate and hydrochlorothiazide and relevant impurities in the tablets. Moreover, the developed method was successfully applied to the analysis of commercial tablet dosage forms and proved to be suitable for routine quality control use. The case study could be used to streamline USP's monograph modernization process of FDCs and strengthen compendial procedures.

Quantitative analysis of 3-isopropylamino-1,2-propanediol as a degradation product of metoprolol in pharmaceutical dosage forms by HILIC-CAD.

Aryloxypropanolamine is an essential structural scaffold for a variety of ß-adrenergic receptor antagonists such as metoprolol. Molecules with such a structural motif tend to degrade into α, ß-hydroxypropanolamine impurities via a radical-initiated oxidation pathway. These impurities are typically polar and nonchromophoric, and are thus often overlooked using traditional reversed phase chromatography and UV detection. In this work, stress testing of metoprolol confirmed the generation of 3-isopropylamino-1,2-propanediol as a degradation product, which is a specified impurity of metoprolol in the European Pharmacopoeia (impurity N). To ensure the safety and quality of metoprolol drug products, hydrophilic interaction chromatography (HILIC) methods using Halo Penta HILIC column (150 mm × 4.6 mm, 5 µm) coupled with charged aerosol detection (CAD) were developed and optimized for the separation and quantitation of metoprolol impurity N in metoprolol drug products including metoprolol tartrate injection, metoprolol tartrate tablets, and metoprolol succinate extended-release tablets. These HILIC-CAD methods were validated per USP validation guidelines with respect to specificity, linearity, accuracy, and precision, and have been successfully applied to determine impurity N in metoprolol drug products.

Advancing USP compendial methods for fixed dose combinations: A case study of metoprolol tartrate and hydrochlorothiazide tablets / 药物分析学报

The current United States Pharmacopeia–National Formulary (USP–NF) includes more than 250 mono-graphs of fixed dose combinations (FDCs), and some of them need to be updated due to incompleteness of impurity profiles and obsolescence of analytical methodologies. A case study of metoprolol tartrate and hydrochlorothiazide tablets is presented to summarize challenges encountered during the USP monograph modernization initiative of FDCs and to highlight an "adoption and adaptation" approach employed for method development. To this end, a single stability-indicating HPLC method was devel-oped to separate the two drug substances and eight related compounds with resolution 2.0 or higher between all critical pairs. Chromatographic separations were achieved on a Symmetry column (C18, 100 mm × 4.6 mm, 3.5 μm) using sodium phosphate buffer (pH 3.0; 34 mM) and acetonitrile as mobile phase in a gradient elution mode. The stability-indicating capability of this method has been demon-strated by analyzing stressed samples of the two drug substances. The developed HPLC method was validated for simultaneous determination of metoprolol tartrate and hydrochlorothiazide and relevant impurities in the tablets. Moreover, the developed method was successfully applied to the analysis of commercial tablet dosage forms and proved to be suitable for routine quality control use. The case study could be used to streamline USP's monograph modernization process of FDCs and strengthen compendial procedures.

Quantitative analysis of 3-isopropylamino-1,2-propanediol as a degradation product of metoprolol in pharmaceutical dosage forms by HILIC-CAD / 药物分析学报

Aryloxypropanolamine is an essential structural scaffold for a variety of β-adrenergic receptor antago-nists such as metoprolol. Molecules with such a structural motif tend to degrade into α, β-hydroxypropanolamine impurities via a radical-initiated oxidation pathway. These impurities are typically polar and nonchromophoric, and are thus often overlooked using traditional reversed phase chromatography and UV detection. In this work, stress testing of metoprolol confirmed the generation of 3-isopropylamino-1,2-propanediol as a degradation product, which is a specified impurity of metoprolol in the European Pharmacopoeia (impurity N). To ensure the safety and quality of metoprolol drug products, hydrophilic interaction chromatography (HILIC) methods using Halo Penta HILIC column (150 mm×4.6 mm, 5 μm) coupled with charged aerosol detection (CAD) were developed and optimized for the separation and quantitation of metoprolol impurity N in metoprolol drug products including metoprolol tartrate injection, metoprolol tartrate tablets, and metoprolol succinate extended-release tablets. These HILIC-CAD methods were validated per USP validation guidelines with respect to speci-ficity, linearity, accuracy, and precision, and have been successfully applied to determine impurity N in metoprolol drug products.

Quantification of Bisoprolol and Metoprolol in Simultaneous Human Serum and Cerebrospinal Fluid Samples.

BACKGROUND: Bisoprolol and metoprolol are moderately lipophilic, beta(1)-selective betablockers reported to cause adverse effects in the central nervous system (CNS), such as sleep disturbance, suggesting that both drugs may reach relevant concentrations in the brain. CNS beta(2)-receptor blockade has been suspected to be related to such effects. The higher molecular size of bisoprolol (325 Dalton) and the higher beta(1)-selectivity compared to metoprolol (267 Dalton) would suggest a lower rate of CNS effects. METHODS: To address the pharmacokinetic background of this assumption, we quantified to which extent these beta(1)-blockers are able to enter the cerebrospinal fluid (CSF) in 9 (bisoprolol group) and 10 (metoprolol group) neurological patients who had received one of the drugs orally for therapeutic purposes prior to lumbar puncture. We quantified their total concentrations by liquid chromatography/tandem mass spectrometry in paired serum and CSF samples. RESULTS: Median (interquartile range) in CSF reached 55% (47-64%) of total serum concentrations for bisoprolol and 43% (27-81%) for metoprolol, corresponding to 78% (67-92%) and 48% (30-91%) of respective unbound serum concentrations. CONCLUSION: The extent of penetration of bisoprolol and metoprolol into the CSF is similar and compatible with the assumption that both drugs may exert direct effects in the CNS.

Development of metoprolol tartrate-loaded sustained-release pellets: effect of talc on the mechanism of drug release.

Talc is one of the most commonly used antiadherents in the coating film. However, the mechanism of influence of talc on drug release has yet to be fully understood. In this study, metoprolol tartrate (MT)-loaded Eudragit NE 30 D-coated sustained-release (SR) pellets were prepared using talc as an antiadherent in the layering and coating processes. Talc significantly reduced the stickiness of the layered or coated substrates, thus enhancing the process smoothness. Moreover, the incorporation of talc into the coating film significantly affected drug release. The water vapor permeability and drug permeability of free films increased as the concentration of talc increased. Importantly, talc had a dynamic effect on the drug release. The drug release rate of the pellets in the initial stage (within 2 h) increased with increasing talc concentrations, which exceeded the critical pigment volume concentration resulted in leaks formation in the coated film. However, subsequent swelling of the membrane and expansion of the copolymer network eliminated the influence of talc and the drug release was then controlled by the polymeric membrane. These results suggest that talc contributed to the reduction of the sticking of layered or coated substrates, and facilitated the manufacturing process and drug release properties.

Preparation and evaluation of metoprolol tartrate sustained-release pellets using hot melt extrusion combined with hot melt coating.

The objective of this study was to prepare and evaluate metoprolol tartrate sustained-release pellets. Cores were prepared by hot melt extrusion and coated pellets were prepared by hot melt coating. Cores were found to exist in a single-phase state and drug in amorphous form. Plasticizers had a significant effect on torque and drug content, while release modifiers and coating level significantly affected the drug-release behavior. The mechanisms of drug release from cores and coated pellets were Fickian diffusion and diffusion-erosion. The coated pellets exhibited sustained-release properties in vitro and in vivo.

Preparation and characterization of metoprolol tartrate containing matrix type transdermal drug delivery system.

The present study aimed to develop matrix-type transdermal drug delivery system (TDDS) of metoprolol tartrate using polyvinyl pyrrolidone (PVP) and polyvinyl alcohol (PVA). The transdermal films were evaluated for physical parameters, Fourier transform infrared spectroscopy analysis (FTIR), differential scanning calorimetry (DSC), in vitro drug release, in vitro skin permeability, skin irritation test and stability studies. The films were found to be tough, non-sticky, easily moldable and possess good tensile strength. As the concentration of PVA was increased, the tensile strength of the films was also increased. Results of FTIR spectroscopy and DSC revealed the absence of any drug-polymer interactions. In vitro release of metoprolol followed zero-order kinetics and the mechanism of release was found to be diffusion rate controlled. In vitro release studies of metoprolol using Keshary-Chein (vertical diffusion cell) indicated 65.5 % drug was released in 24 h. In vitro skin permeation of metoprolol transdermal films showed 58.13 % of the drug was released after 24 h. In vitro skin permeation of metoprolol followed zero-order kinetics in selected formulations. The mechanism of release was found to be diffusion rate controlled. In a 22-day skin irritation test, tested formulation of transdermal films did not exhibit any allergic reactions, inflammation, or contact dermatitis. The transdermal films showed good stability in the 180-day stability study. It can be concluded that the TDDS of MPT can help in bypassing the first-pass effect and will provide patient improved compliance, without sacrificing the therapeutic advantages of the drugs.

Similarity Evaluation of the Dissolution Curves between Generic and Original Metoprolol Tartrate Tablets / 中国药房

OBJECTIVE:To establish the method for dissolution determination of Metoprolol tartrate tablets,and to evaluate the similarity of dissolution curves of generics and original drugs. METHODS:The paddle method was adopted with rotational the speed of 50 r/min,using pH 1.2 hydrochloric acid solution,pH 4.5 acetate buffer solution and pH 6.8 phosphate buffer solution as dissolution media. Fiber-optical drug dissolution real-time measurement instrument was used to determine the dissolution curves of generic and original Metoprolol tartrate tablets with optical distance of 10 mm. Similarity factor (f2) method was used to evaluate its similarity. RESULTS:In 3 dissolution mediums,the f2 of generic and original Metoprolon tartrate tablets were 80.5,66.8, 69.4,respectively,which indicated that the dissolution curves showed similarity. CONCLUSIONS:Established real-time dissolution process analysis method is suitabe for the dissolution determination of Metoprolol tartrate tablets. Generic and eriginal show the sim-ilarity in dissolation behavier,so they have good consistency in quality.