Analysis of the stomatognathic system functions and mastication muscles in children affected by molar hypomineralization (MH): a cross-sectional study.

PURPOSE: To analyze the functions of the stomatognathic system in children with or without molar-incisor hypomineralization (MIH). METHODS: For this cross-sectional study, 72 children aged 6-12 years were recruited and divided in two groups: with MIH (G1) and without MIH (G2). T-SCAN was used to verify the distribution of occlusal contacts, gnathodynamometer to measure maximum molar bite force, and Iowa Oral Pressure Instrument (IOPI) to assess the strength of facial expression muscles. The t test and paired t test (p ≤ 0.05) were used for statistical comparisons. RESULTS: The molars affected by MIH exhibited lower distribution of occlusal forces (p < 0.001) and lower maximum molar bite force (p < 0.05) compared to the molars in the control group. However, there was no difference between the MIH-affected sides compared to the unaffected side, nor between the molars affected by MIH and their antagonists (p > 0.05). There were no differences in the forces of the facial expression muscles between the groups. CONCLUSIONS: These findings suggest that MIH significantly impacts occlusal force distribution and bite force, but not facial expression musculature.

Comparison of the Cameriere's third molar maturity index and Olze et al.'s stages of radiographic visibility of the root pulp in a Turkish population.

Purpose: The purpose of this study was to compare the Cameriere's third molar maturity index and Olze et al.'s stages of radiographic visibility of the root pulp in estimating the age of maturity in the Turkish population. The age of majority, which is legally significant, marks the transition from childhood to adulthood. In Turkey, the age of majority is set at 18 years. As the third molars continue to develop at this age, they can serve as an indicator of dental age. Materials and methods: A total of 705 panoramic radiographs obtained from individuals aged 15 to 22 years, including children and adults, were included in this study. The left mandibular third molars were evaluated on panoramic radiographs using Cameriere's third molar maturity index and Olze's method of radiographic root pulp visibility (RPV) stages. Minimum and maximum values were noted for each stage, and a median with upper and lower quartiles, as well as mean and standard deviation were calculated. Sensitivity and specificity values were calculated. Results: In males, Cameriere's third molar maturity index demonstrated a sensitivity of 0.77% and specificity of 0.96%, while in females, it showed a sensitivity of 0.57% and specificity of 0.92%. Regarding Olze et al.'s stage 0, the sensitivity and specificity values were 0.86% and 0.79% in males, and 0.85% and 0.75% in females, respectively. Conclusion: Although both methods can be used to distinguish individuals below or above the age of 18, the cut-off value suggested by Cameriere's method resulted in a higher rate of type 2 error (false negativity). Therefore, the method proposed by Olze et al., based on the radiographic visibility of the root pulp, can be employed to differentiate between adults and minors in the Turkish population.

Diving Deep: Exploring Dual Palatal Canals in the Upper Second Molar.

Dental anatomy exhibits considerable variation with the presence of additional canals being a common occurrence. The upper second molar typically presents with three canals and three roots; however, variations such as the existence of an extra canal or a root can pose challenges during endodontic treatment. Maxillary molar is characterized by an additional canal located within the palatal root, often exhibiting complex configurations and variations in morphology. Access refinement is critical to gaining adequate visibility and facilitating instrumentation. Meticulous exploration of the pulp chamber floor and careful examination of radiographs from different angles are essential for accurate diagnosis. Careful negotiation and cleaning of the extra canal with appropriate files and irrigants are essential to remove pulp tissue and debris effectively. Furthermore, obturation of the canal space with biocompatible materials is crucial to ensure a three-dimensional seal and prevent bacterial ingress. Clinically, the inability to detect and treat the extra palatal canal can lead to persistent infection, incomplete debridement, and compromised treatment outcomes. This case report delves into the significance of this anatomical variation, diagnostic modalities, and effective management strategies.

Genetic polymorphisms associated with developmental defects of enamel: A systematic review.

BACKGROUND: Polymorphisms in genes related to enamel formation and mineralization may increase the risk of developmental defects of enamel (DDE). AIM: To evaluate the existing literature on genetic polymorphisms associated with DDE. DESIGN: This systematic review was registered in the PROSPERO (CRD42018115270). The literature search was performed in PubMed, Scopus, Web of Science, LILACS, BBO, Cochrane Library, and in the gray literature. Observational studies assessing the association between DDE and genetic polymorphism were included. The Newcastle-Ottawa Scale was used to assess the risk of bias. RESULTS: One thousand one hundred and forty-six articles were identified, and 28 met the inclusion criteria. Five studies presented a low risk of bias. Ninety-two genes related to enamel development, craniofacial patterning morphogenesis, immune response, and hormone transcription/reception were included. Molar-incisor hypomineralization (MIH) and/or hypomineralization of primary second molars (HPSM) were associated with 80 polymorphisms of genes responsible for enamel development, immune response, morphogenesis, and xenobiotic detoxication. A significant association was found between the different clinical manifestations of dental fluorosis (DF) with nine polymorphisms of genes responsible for enamel development, craniofacial development, hormonal transcription/reception, and oxidative stress. Hypoplasia was associated with polymorphisms located in intronic regions. CONCLUSION: MIH, HPSM, DF, and hypoplasia reported as having a complex etiology are significantly associated with genetic polymorphisms of several genes.

Retrospective analysis of the effects of impacted third molar on hematologic patients undergoing hematopoietic stem cell transplantation.

Objective: This study aimed to investigate the incidence, treatment status, and impact position of impacted third molars (ITM) and their effects on patients undergoing hematopoietic stem cell transplantation (HSCT). Methods: A retrospective analysis was conducted on the medical records of 454 patients who underwent HSCT, out of which 188 patients had ITM. The presence of ITM and its association with transplant-related infections and complications were recorded and analyzed. Results: Patients with ITM were significantly younger. The number of mandibular ITM was notably higher than maxillary ones, and the risk of pericoronitis in mandibular ITM was significantly higher than in maxillary ones. Out of 311 ITM in 188 patients, 25 were extracted before transplantation. The proportion of extraction and treatment for ITM with pericoronitis or caries was significantly higher than that for ITM without such problems. Moreover, patients with a history of pre-transplant pericoronitis had a significantly higher probability of developing tooth-related complications during transplantation, caused by pericoronitis in ITM compared to patients without a history of pericoronitis. Conclusion: Pre-transplant examination and treatment of ITM are essential, especially in cases with a history of pericoronitis. Oral intervention can significantly reduce the occurrence of tooth-related complications related to ITM during transplantation.

Two Palatal Roots in Maxillary First Molar, a Rare Entity: Report of Two Cases.

An in-depth understanding of the anatomical variations of maxillary molars is essential for endodontic success. Unlike the maxillary second molars, the presence of a second palatal root is uncommon in the first maxillary molar. This case report describes two cases of non-surgical management of maxillary molars with extra palatal roots. Careful clinical examination, knowledge of the internal anatomy, and the use of advanced radiographic modalities like cone beam computed tomography (CBCT) can reveal the presence of variations in the internal and external anatomy of any tooth. Therefore, for nonsurgical as well as surgical management clinicians should always watch out for any deviations in a tooth and utilize all the available tools to diagnose and manage them successfully.

System-agnostic prediction of pharmaceutical excipient miscibility via computing-as-a-service and experimental validation.

We applied computing-as-a-service to the unattended system-agnostic miscibility prediction of the pharmaceutical surfactants, Vitamin E TPGS and Tween 80, with Copovidone VA64 polymer at temperature relevant for the pharmaceutical hot melt extrusion process. The computations were performed in lieu of running exhaustive hot melt extrusion experiments to identify surfactant-polymer miscibility limits. The computing scheme involved a massively parallelized architecture for molecular dynamics and free energy perturbation from which binodal, spinodal, and mechanical mixture critical points were detected on molar Gibbs free energy profiles at 180 °C. We established tight agreement between the computed stability (miscibility) limits of 9.0 and 10.0 wt% vs. the experimental 7 and 9 wt% for the Vitamin E TPGS and Tween 80 systems, respectively, and identified different destabilizing mechanisms applicable to each system. This paradigm supports that computational stability prediction may serve as a physically meaningful, resource-efficient, and operationally sensible digital twin to experimental screening tests of pharmaceutical systems. This approach is also relevant to amorphous solid dispersion drug delivery systems, as it can identify critical stability points of active pharmaceutical ingredient/excipient mixtures.

Effect of impacted mandibular third molar extraction on periodontal microbiota and clinical parameters of adjacent teeth: A randomized clinical trial.

It is urgently necessary to clarify the effect of extraction of impacted mandibular third molar (IMTM) on the periodontal tissue of adjacent second molars (ASMs). In this study, the ASM periodontal condition and pathogenic microbes were assessed before IMTM extraction and at 1, 4, 8 and 12 weeks postoperatively. Based on the inclusion and exclusion criteria, our study revealed that IMTM extractions adversely affected distal － periodontal probing depth (dPPD), attachment loss (dAL), plaque index (dPLI) and bleeding on probing (dBOP) within 8 weeks, but these indices gradually normalize after 12 weeks. The subgingival pathogens near the ASMs distal surface, Porphyromonas and Pseudomonas, were significantly increased postoperatively. Moreover, relevance of ASMs clinical indices and subgingival microbes after IMTM extractions was found. In contrast to the situation in chronic periodontitis, the effects of IMTM extraction on dPPD, dAL, dPLI and dBOP of ASMs were mainly correlated with Pseudomonas. Additionally, while the IMTM extractions have adverse distal periodontal indices of ASMs within 8 weeks and increase subgingival pathogens, the modified triangular flap (MTF) had fewer distal periodontal indices and less Pseudomonas. Compared to the traditional envelope flap and triangular flap, the MTF benefits the periodontal health, which could be considered as the priority option for IMTM extractions.

Effect of platelet-rich fibrin on the recovery after third molar surgery: A systematic review and meta-analysis.

This meta-analysis aimed to elucidate the effects of platelet-rich fibrin (PRF) on the recovery of alveolar bone after surgical removal of the mandibular third molars. PubMed, Cochrane Library, Web of Science, and Embase databases were searched from the inception to February 2023 for relevant studies on the application of PRF after the extraction of impacted mandibular third molars, with the language limited to English. Literature screening was conducted by two independent researchers. The Cochrane risk-of-bias tool was adopted for quality evaluation, and Stata 15.0 was used for statistical analysis. A total of 33 randomized controlled trials were included in the present study. Following surgical removal of the mandibular third molars, 1139 tooth sockets were filled with PRF, while 1138 sockets were sutured after conventional saline irrigation. The meta-analyses showed that PRF can relieve pain [(RR 0.454; 95% CI 0.23, 0.891); (SMD -0.74; 95% CI -0.97, 0.52)], improve swelling (SMD -1.48; 95% CI -1.90, -1.06), alleviate trismus (SMD -0.35; 95% CI -0.51, -0.19), reduce dry socket (SMD -0.18; 95% CI -030, -0.05), and promote bone tissue healing (SMD 2.34; 95% CI 0.18, 4.51). The current study confirms that PRF can reduce some postoperative complications. Local application of PRF after lower third molar extraction is a viable method for relieving pain and swelling, reducing the incidence of dry socket and trismus, and increasing bone density. However, whether it can promote soft tissue healing remains unclear. For patients undergoing complicated surgical extraction, local application of PRF into the sockets might be a good option.

Tip, torque and rotation of maxillary molars during distalization using Invisalign: a CBCT study.

BACKGROUND: Desirable molar distalization by bodily movement is challenging and can be difficult to achieve. This study investigated changes in molar angulation (mesiodistal tipping), molar inclination (buccolingual torque) and rotation during distalization using clear aligner therapy (CAT). MATERIALS AND METHODS: This retrospective study included 38 cone beam computed tomographic images (CBCTs) taken for patients treated with molar distalization using CAT. The study evaluated pre- (T0) and post-treatment (T1) CBCTs of 19 adult patients (36.68 ± 13.50 years) who underwent maxillary molar distalization using Invisalign® aligners (Align Technology, Inc., San José, CA, USA) with a minimum of 2 mm distalization. Changes in maxillary molar tip, torque and rotation were measured for 61 molars (183 roots). Paired t-test was used to evaluate the differences between pre- and post-treatment readings. The level of significance was set at p ≤ 0.05. The reproducibility of measurements was assessed by the intraclass correlation coefficient (ICC). RESULTS: Molar angulation did not show significant change after distalization (p = 0.158) however, there was significant increase in buccal molar inclination (p = 0.034) and mesiobuccal molar rotation (p < 0.001). CONCLUSION: Molar distalization of 2 mm did not cause significant molar tipping. Maxillary molars showed significant buccal inclination (increased torque) and mesiobuccal rotation after distalization.

Which are the clinical consequences of Molar Incisor hypomineralization (MIH) in children and adolescents? Systematic review and meta-analysis.

OBJECTIVE: This systematic review was conducted to address the following research question: "What are the clinical consequences (outcome) of Molar Incisor Hypomineralization (MIH) (exposure) in children and adolescents (population/patient)?". MATERIAL AND METHODS: After defining the strategy, a search was performed in different databases (MEDLINE via Pubmed, Cochrane Library, BBO, LILACS, Scopus, Web of Science, Embase) and Grey literature in August 2023. Cross-sectional observational studies that identified clinical consequences of MIH (dental caries, post-eruptive structural loss, atypical restorations, hypersensitivity and tooth extraction) were included. The risk of bias was assessed following the Joanna Briggs Institute protocol for cross-sectional studies. Meta-analyses were conducted for each outcome, taking into account the number of patients and teeth. The effect measure considered was the prevalence; random-effects model was adopted. Heterogeneity was assessed using I2 statistics and prediction intervals (PI). RESULTS: A total of 903 studies were identified; 41 were selected for qualitative analysis and 38 for quantitative analysis. Twenty eight studies were classified as presenting uncertain risk of bias, 11 as low risk and 3 as high risk of bias. The prevalence levels, ranked from highest to lowest and considering the tooth and patient units, respectively, were: caries lesions (0.252 - 95% CI 0.158-0.375; 0.512 - 95% CI 0.385-0.639); hypersensitivity (0.286 - 95% CI 0.190-0.407; 0.417 - 95% CI 0.197-0.674), post-eruptive fracture (0.125 - 95% CI 0.099-0.158; 0.257 - 95% CI 0.145-0.412); atypical restorations (0.048 - 95% CI 0.030-0.077; 0.167 - 95% CI 0.096 - 0.274); tooth extraction (0.012 - 95% CI 0.007-0.019; 0.090 - 95% CI 0.019 - 0.331). All meta-analyses resulted in heterogeneity greater than 85%, with the exception of the outcome "tooth extraction" according to the tooth unit (I2 = 57.83). This heterogeneity may be attributed to factors such as differences in the location where the study was realized, the socioeconomic conditions of the studied population, the asymmetric nature of MIH, and patient age. CONCLUSION: The most common consequences of MIH are caries lesions, hypersensitivity, and post-eruptive breakdown. (PROSPERO:CRD42020201410).

Development of an HPLC method using relative molar sensitivity for the measurement of blood concentrations of nine pharmaceutical compounds.

We developed a reliable high-performance liquid chromatographic analysis method using a relative molar sensitivity (RMS) technique that does not require an authentic, identical reference analyte material to quantify blood serum carbamazepine, phenytoin, voriconazole, lamotrigine, meropenem, mycophenolic acid, linezolid, vancomycin, and caffeine levels for routine blood concentration measurements. Carbamazepine and caffeine were also used as non-analyte reference materials to calculate the RMS of each analyte. The RMS was calculated from the ratio of the slope of the calibration equation (analyte/non-analyte reference material), then used to quantify analytes in control serum samples spiked with carbamazepine, phenytoin, voriconazole, meropenem, mycophenolic acid, linezolid or vancomycin. In addition, the concentrations of these six drugs in control serum samples determined by the proposed RMS method agreed well with that obtained using a conventional method. The proposed RMS method is a promising tool for the clinical determination of nine drugs, given the accuracy, precision, and efficiency of quantifying these analytes.

Determination of standard molar volume of 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide on titanium dioxide surface.

The fluids near the solid substrate display different properties compared to the bulk fluids owing to the asymmetric interaction between the fluid and substrate; however, to the best of our knowledge, no work has been conducted to determine the interfacial properties of fluids experimentally. In this work, we combined a pycnometer with experimental measurements and data processing to determine the standard thermodynamic properties of interfacial fluids for the first time. In the study, 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([Hmim][NTf2]) and titanium dioxide (P25) were chosen as the probes to prove the concept. It was found that, with the combination of the Gay-Lussac pycnometer and the colligative law, together with selecting a suitable solvent, it is possible and reliable to determine the standard molar volume of the immobilized [Hmim][NTf2]. Compared to the bulk phase, the molar volumes of [Hmim][NTf2] on the P25 surface reduce by 20.8%-23.7% at temperatures from 293.15 to 323.15 K, and the reduction degrees decrease with increasing temperatures. The newly determined standard thermodynamic data was used to obtain the model parameters of hybrid electrolyte perturbed-chain statistical associating fluid theory density functional theory (ePC-SAFT-DFT), and further predictions of the density of interfacial ionic liquids with different film thicknesses were proved to be reliable in comparison with the experiment results.

Anatomical Variations in Mandibular Molars: Focus on Midmesial Canals.

Endodontic therapy focuses on the root canal system to treat infected or damaged pulp tissue within the tooth, ultimately preserving the tooth and restoring its function. The root canal space should be cleaned with the use of proper instruments and chemical disinfectants to eradicate infected pulpal tissue and its remnants. The failure of endodontic therapy is attributed to a lack of understanding of the differences in anatomy among teeth, as evidenced by research. Canals are identified, and endodontic treatment is facilitated by the use of dental operating microscopes. Therefore, to achieve a favorable endodontic result, it is imperative to use all available methods to identify additional aberrant root canals. Failure to detect and adequately treat the midmesial canal (MMC) can lead to persistent infection, treatment failure, and the need for retreatment. This case underscores the importance of meticulous assessment and advanced techniques in treating complex canal configurations, ultimately leading to favorable outcomes in endodontic therapy. The MMC, a challenging anatomical feature, was located through careful clinical and radiographic examination. Advanced techniques, including ultrasonic activation and meticulous instrumentation, were employed to navigate and clean the canal effectively. Sodium hypochlorite irrigation and passive ultrasonic activation were utilized for thorough disinfection. The MMC was sealed with biocompatible materials, ensuring comprehensive obturation of the root canal system.

Control of anterior anchorage with miniscrews and sliding mechanics in an adolescent with missing second premolars: A clinical report with biomechanical validation.

Congenital missing second premolars in growing patients should be accurately evaluated in order to establish a suitable treatment plan. Concerning the decision of whether to close or maintain spaces in the dental arches, it shall also be based on biomechanical aspects and the aesthetic traits of individual patients. Accordingly, the option of closing tooth spaces requires an adequate application of biomechanical principles aimed at avoiding detrimental effects on dental arches and facial profile. An effective use of titanium miniscrews for immediate loading, associated with efficient sliding mechanics, can represent an elective way to successfully treat such cases. Herein, the objective is to describe the procedure and underscore the advantages of the mentioned approach by presenting a clinical case along with long-term follow-up.

Soft tissue inflammation around upper third molar cause limited mouth opening: common but overlooked.

OBJECTIVES: The aim of this study was to explore inflammation of soft tissue around the upper third molar as a prevalent cause of limited mouth opening, identify the clinical and radiographic features, and summarize the therapeutic effectiveness of tooth extraction. MATERIALS AND METHODS: A retrospective analysis of data from 264 patients with limited mouth opening over the last five years was performed. RESULTS: Among the 264 patients, 24 (9.1%) had inflammation of the soft tissue around the upper third molar, which was the second most common cause of limited mouth opening. Twenty-one of the twenty-four affected patients, with an average mouth opening of 19.1 ± 7.6 mm, underwent upper third molar extraction. Gingival tenderness around the upper third molar or maxillary tuberosity mucosa was a characteristic clinical manifestation (p < 0.05). The characteristic features on maxillofacial CT included soft tissue swelling around the upper third molar and gap narrowing between the maxillary nodules and the mandibular ascending branch. Post extraction, the average mouth opening increased to 31.4 ± 4.9 mm (p < 0.05), and follow-up CT demonstrated regression of the inflammatory soft tissue around the upper third molar. CONCLUSIONS: Inflammation of soft tissue around the upper third molar is a common cause of limited mouth opening. Symptoms of pain associated with the upper third molar and distinctive findings on enhanced maxillofacial CT scans are crucial for diagnosis. Upper third molar extraction yields favorable therapeutic outcomes. CLINICAL RELEVANCE: Inflammation of the soft tissue around the maxillary third molar commonly causes limited mouth opening, but this phenomenon has long been overlooked. Clarifying this etiology can reduce the number of misdiagnosed patients with restricted mouth opening and enable more efficient treatment for patients.

Uprighting and protraction of two unilateral mandibular molars using a cantilever arm through a sophisticated biomechanical system with clear aligner: A case report.

Although clear aligner can be efficient and predictable in some tooth movements, mandibular molar protraction is the least predictable owing to biological and biomechanical limitations. This case report presents a 20-year-old female with poor prognosed left mandibular first molar (#36), deviated dental midline and mild crowding. After extraction of #36, clear aligners and an Albert cantilever were used for treatment. Through carefully designed dual mechanical system, we achieved uprighting and protraction of #37 within 27 months, with crown and root movements of 9.9mm and 12.1mm, respectively. The predictability of the crown and root movement was 107.6% and 84.6%. Coincident dental and facial midline, class I molar and canine relationship and good root parallelism were also achieved. Large-distance mandibular molar protraction can be achieved effectively with a combination of Albert cantilever arm and clear aligner.

Hemisection: A Paradigm Shift in Prolonging Tooth Viability.

Splitting a molar means removing or separating the root and the accompanying crown portion. Hemisection of a damaged tooth aids in preserving the tooth structure and the existing alveolar bone surrounding the preserved root while also enabling the installation of a fixed prosthesis. This case report defines hemisection as an effective modality for preserving carious mandibular first molars with periodontal and periapical pathology.

The Assessment of C-shaped Canal Prevalence in Mandibular Second Molars Using Endodontic Microscopy and Cone Beam Computed Tomography: An In Vivo Investigation.

Background Understanding root canal anatomy variations, particularly C-shaped canals, is crucial for successful endodontic treatment. This study used clinical and radiographic methods to assess the prevalence and characteristics of C-shaped canals in mandibular second molars in Western Maharashtra. Materials and methods This prospective study was conducted in the western region of Maharashtra, India. The samples included patients requiring endodontic treatment for mandibular second molars. Clinical evaluation was conducted using a surgical endodontic microscope and cone beam computed tomography (CBCT) imaging. Inclusion and exclusion criteria ensured the selection of a focused and homogeneous sample. Data analysis included assessment of unilateral/bilateral occurrence, canal distribution, and cross-sectional characteristics. Results Out of 200 mandibular second molars, 7.5% exhibited C-shaped root canals, with no significant gender differences. Canal distribution varied across coronal, middle, and apical levels, with prevalent configurations being C1, C2, C3, and C4. No significant differences were observed in canal distribution based on root levels. No significant gender differences were found in the presence of grooves on the root surfaces. Conclusion This study provides valuable insights into the prevalence and characteristics of C-shaped canals in mandibular second molars in Western Maharashtra. Further research into histological and genetic aspects can enhance our understanding, leading to improved treatment strategies for complex root canal anatomy variations.

Immediate Implant Placement with Different Interradicular Osteotomies in the Mandible: A Randomized Clinical Study.

AIM: To assess the implant stability and amount of marginal bone loss in immediate implant placement (IIP) in mandibular molars by using pre-extractive interradicular implant bed preparation vs conventional post-extractive interradicular implant bed preparation. MATERIALS AND METHODS: This randomized clinical trial was conducted on fourteen patients who had an immediate dental implant at the mandibular molar area by two different techniques. All patients were divided randomly into two equal groups: Group I (control) was treated with conventional post-extractive interradicular implant bed preparation, and group II (test) was treated by pre-extractive interradicular implant bed preparation All surgeries were performed by the same surgeon. All patients were followed up clinically at immediate post-surgery (T0), 7 days (T1), 3 weeks (T2), 90 days (T3), and 3 months after loading (T6) for healing and to evaluate the marginal bone loss radiographically at T0, T3 and T6. Descriptive and bivariate statistics were computed using the SPSS version (SPSS, IBM Inc., Chicago, IL), and p ≤ 0.05 was considered an indicator of statistical significance. RESULTS: A total of 7 female and 7 male patients with a mean age of 32.07 ± 5.87 years. Radiographically, there is no significant statistical difference in comparing between two groups for the marginal bone loss. However, there was a highly significant statistical difference (p < 0.001) in each group between different interval periods (T0, T3, T6) with mean start 5.27 ± 0.53, and 5.19 ± 0.72 at (T0) reaching 7.60 ± 0.89 and 7.09 ± 0.96 at (T3) and slightly decrease of 7.52 ± 0.79 and 7.02 ± 0.79 in (T6) with radiographic evaluation, and it represented clinically in each group with mean 3.57 ± 0.313 and 4.0 ± 0.58 at (T0) increase to 6.55 ± 0.395 and 6.52 ± 0.45 at (T6) for both group respectively. There is no statistically significant difference in soft tissue healing with an average mean of 4.57 ± 0.24 and 3.57 ± 0.509 (p = 0.001) when comparing between both groups respectively. CONCLUSION: Both techniques seem useful for dental implant placement in badly decayed mandibular molars. However, pre-extracted interradicular implant bed preparation for IIP might offer advantages in terms of primary implant stability and bone preservation. However, further studies are needed to confirm these findings. CLINICAL SIGNIFICANCE: Both techniques are alternative methods for the treatment of badly decayed mandibular molars by immediate dental implant except for minor complications that do not interfere with dental implant placement. How to cite this article: Alzaibak LMA, Abdel-Monem TM, Elgohary NM, et al. Immediate Implant Placement with Different Interradicular Osteotomies in the Mandible: A Randomized Clinical Study. J Contemp Dent Pract 2024;25(4):303-312.