Mold and Stain Resistance of Bamboo Treated with Pyraclostrobin Fungicide.

Bamboo is rich in starch and sugars and can be infected by mold and stain fungi, degrading its performance, shortening its service life, and reducing its utilization value. It is crucial to investigate how to protect bamboo against mold and stain fungi. The zone of inhibition test was used to evaluate the antifungal activity of azoxystrobin, kresoxim-methyl, pyraclostrobin and 3-iodo-2-propynyl-butylcarbamate (IPBC) against stain fungi (Botryodiplodia theobromae, Fusarium moniliforme, and Alternaria alternate) and mold fungi (Aspergillus niger, Penicillium citrinum, and Trichoderma viride) to develop new chemicals to protect bamboo against stain fungi and molds. The inhibitory activity of the composite pyraclostrobin and IPBC with different ratios was evaluated. Water-based formulations of the fungi were used to treat the bamboo, and the mold and stain resistance of the bamboo was investigated at different chemical retention rates. The results showed that the antifungal activity of pyraclostrobin was significantly higher than that of azoxystrobin and kresoxim-methyl. Different degrees of inhibitory activities against the stain and mold fungi were observed, and the inhibitory activity was higher against stain fungi than against molds. The three stain fungi were completely inhibited at a 7:3 ratio of pyraclostrobin to IPBC and 0.1% concentration. As the ratio increased, the inhibitory effect against mixed mold strains improved. The control efficacy of the pyraclostrobin formulations Str-1 and Str-2 at 0.1% concentration was 100% against Alternaria alternate and 70.8% against Fusarium moniliforme. The control efficacy of the composite formulations SI-1 and SI-2 at 0.1% concentration was 100% against all three stain fungi and greater than 91.8% against the mixed mold strains. This study provides new insights into the utilization of pyraclostrobin and its composite formulations as new bamboo antifungal agents.

Characterization of Self-Growing Biomaterials Made of Fungal Mycelium and Various Lignocellulose-Containing Ingredients.

In this study, novel blends of mycelium biocomposites (MB) were developed. Various combinations of birch sawdust and hemp shives with birch bark (BB) and wheat bran (WB) additives were inoculated with basidiomycete Trametes versicolor to produce self-growing biomaterials. MB were characterized according to mycelial biomass increment in final samples, changes in chemical composition, elemental (C, H, N) analyses, granulometry of substrates, water-related and mechanical properties, as well as mold resistance and biodegradability. The mycelial biomass in manufactured MB increased by ~100% and ~50% in hemp and sawdust substrates, respectively. The lignocellulose ingredients during fungal growth were degraded as follows: cellulose up to 7% and 28% in sawdust and hemp substrates, respectively, and lignin in the range of 13% in both substrates. A larger granulometric fraction in hemp MB ensured higher strength property but weakened water absorption (600-880%) performance. Perspective MB combinations regarding strength performance were hemp/BB and pure hemp MB (σ10 0.19-0.20 MPa; E 2.9 MPa), as well as sawdust/WB combination (σ10 0.23 MPa; E 2.9 MPa). WB positively affected fungal biomass yield, but elevated water absorption ability. WB improved compressive strength in the sawdust samples but decreased it in the hemp samples. BB supplement reduced water absorption by more than 100% and increased the density of sawdust and hemp samples. All MB samples were susceptible to mold contamination after full water immersion, with identified fungal genera Rhizopus, Trichoderma and Achremonium. The MB exhibited high biodegradability after 12 weeks' exposure in compost, and are therefore competitive with non-biodegradable synthetic foam materials.

Nano-AgCu Alloy on Wood Surface for Mold Resistance.

The mold infection of wood reduces the quality of its surface and potentially endangers human health. One category of the most popular mold inhibitors on the market is water-soluble fungicides. However, easy leaching due to ionic forms is a problem, which reduces the effectiveness of their antimicrobial action, as well as causing environmental pollution. Interestingly, nanometer-sized sterilizing agents present strong permeability and highly fungicidal behavior, and they are not easily leached, due to the unique nanoscale effect, and they have become alternative candidates as marketable anti-mold agents for wood protection. In this study, we first designed and explored a nanoscale alloy (nano silver-copper alloy, nano-AgCu) to treat wood surfaces for mold growth resistance. The results showed that three molds, i.e., Aspergillus niger, Penicillium citrinum and Trichoderma viride, mainly grew on the surface of wood within a depth of 100 µm; and that the nano-AgCu alloy with a particle size of ~15 nm presented improved retention and anti-mold efficiency at a nanomaterial concentration on the wood surface. Its leaching rate increased non-linearly with the increase in nano-AgCu retention and then it showed a gradually decreasing trend. When the concentration reached 1000 mg/L, the nano-AgCu alloy uniformly distributed on the wood surface in a monodispersed state and exhibited a lower retention of 0.342 g/m2, with an anti-mold efficiency of more than 75% and a leaching rate of only 7.678%. Such results positioned 1000 mg/L as the toxic threshold concentration of nano-AgCu against the three molds. This study can provide a scientific basis for the analysis of the anti-mold mechanisms of nano-AgCu alloy on wood surfaces and guide the application of nano-metal alloy materials in the field of wood antimicrobials.

Antifungal Soybean Protein Concentrate Adhesive as Binder of Rice Husk Particleboards.

The aim of this research was to prepare an antifungal soybean protein concentrate (SPC) adhesive containing carvacrol (CRV) as a bioactive agent able to delay the attack of molds and yeast during storage of SPC adhesive at 4 °C as water-based systems. CRV was incorporated in SPC slurry at 0.5% v/v (~10 times its minimum inhibitory concentration against Aspergillus terreus, used as model fungus), to ensure its long-term action. CRV scarcely altered the thermal properties, structure and apparent viscosity of SPC adhesive. Active SPC aqueous dispersion was microbiologically stable for at least 30 days at 4 °C where the colonization begins, while control SPC was visually colonized from the second day. Rice husk (RH) particleboards of density ~900 kg/m3 were manufactured using the active SPC stored for 0, 10, 20, and 30 days as a binder. Modulus of elasticity, modulus of rupture and internal bond of RH-control SPC (without CRV) panels were 12.3 MPa, 2.65 GPa and 0.27 MPa, respectively, and were statistically unaltered compared with those obtained with fresh SPC, regardless of the presence of CRV or the storage time. This last implies that active SPC should not necessarily have to be prepared daily and/or be used immediately after its preparation. Since it is microbiologically stabilized, it can be store at least for 30 days, ensuring the stability of the protein. The quality of the adhesive was evidenced by the consistent properties of the adhesive, expanding its potential use and commercialization.

Improved Dimensional Stability and Mold Resistance of Bamboo via In Situ Growth of Poly(Hydroxyethyl Methacrylate-N-Isopropyl Acrylamide).

Bamboo is a natural and renewable building material but its application has been limited due to the low dimensional stability and poor durability against mold. In this study, monomers of hydroxyethyl methacrylate (HEMA) and N-isopropyl acrylamide (NIPAM) were impregnated in bamboo to facilitate the in situ growth of poly-HEMA and NIPAM (PHN) copolymer. Prior to that, the effects of different reaction conditions, including the molar ratio of HEMA to NIPAM and their concentrations, the amount of initiator (ammonium persulfate, APS) and crosslinking agents (N,N'-Methylenebisacrylamide (MBA), and glutaric dialdehyde (GA)) on the swelling capacity of PHN were optimized. The formation of PHN was confirmed by using Fourier transform infrared spectroscopy and thermogravimetric analysis, which shows the characteristics peaks of both HEMA and NIPAM, and increased pyrolysis and glass transition temperatures, respectively. After impregnation of PHN pre-polymerization formulation to bamboo, it was observed that PHN filled most of the pits in the bamboo cell wall and formed a tight network. Moreover, the dimensional stability of PHN treated bamboo was significantly improved with an anti-swelling efficiency of 49.4% and 41.7%, respectively, after wetting-drying and soaking-drying cycles. A mold infection rate of 13.5% was observed in PHN-treated bamboo as compared to a 100% infected control group after a 30-day mold resistance test. Combined results indicate that in situ polymerization of HEMA and NIPAM in bamboo is a promising method to develop exterior used bamboo products with enhanced dimensional stability and mold resistance.

Mapping QTL conferring speckled snow mold resistance in winter wheat (Triticum aestivum L.).

Speckled snow mold caused by Typhula ishikariensis is one of the most devastating diseases of winter wheat in Hokkaido, Japan and parts of the Pacific Northwest region of USA. Münstertaler is a winter wheat landrace from Switzerland that has very high resistance to snow mold and superior freezing tolerance. Quantitative trait loci (QTL) for resistance to speckled snow mold were identified in a doubled haploid population derived from a cross between Münstertaler and susceptible variety Ibis, both under field conditions and controlled environment tests. Composite interval mapping analysis revealed a major QTL on chromosome 5D from Münstertaler, and on chromosome 6B from Ibis. Flanking microsatellite marker cfd 29 for the QTL on chromosome 5D was about 5 cM distant from vernalization requirement gene Vrn-D1, suggesting that the QTL on chromosome 5D is located on a cold-stress-related gene cluster along with Vrn-D1 and freezing tolerance gene Fr-D1. The QTL on chromosome 6B from Ibis was located on the centromere region flanking QTn.mst-6B, which is reported to increase plant tiller number.

A Tough and Mildew-Proof Soybean-Based Adhesive Inspired by Mussel and Algae.

Despite the recent advances in protein-based adhesives, achieving strong adhesion and mold resistance in wet environment is challenging. Herein, a facile fabrication technology of preparing tough bio-adhesive by incorporating soybean meal and blood meal is presented. Inspired by the marine mussel byssi and brown algae, metal coordination was introduced into a loosely bound protein system to construct multiple chemical cross-linking networks. Mixed alkali-modified blood meal (mBM) was mixed with soybean meal, then 1,6-hexane dioldiglycidyl ether (HDE) and zinc ion were introduced to fabricate soybean meal and blood meal-based adhesives. The attained adhesives exhibited good thermal stability, water resistance (the wet shear strength is 1.1 MPa), and mold resistance, with appropriate solid content (34.3%) and relatively low moisture uptake (11.9%). These outstanding performances would be attributed to the reaction of 1,6-hexane dioldiglycidyl ether with protein to form a preliminary cross-linking network; subsequently, the coordination of zinc ions with amino or carboxyl strengthened and toughened the adhesive. Finally, the calcium ions gelled the adhesives, providing cohesion force and making the network structure more compact. This study realized the value-added utilization of protein co-products and developed a new eco-friendly bio-based adhesive.

Soybean Resistance to White Mold: Evaluation of Soybean Germplasm Under Different Conditions and Validation of QTL.

Soybean (Glycine max L. Merr.) white mold (SWM), caused by Sclerotinia sclerotiorum (Lib) de Barry), is a devastating fungal disease in the Upper Midwest of the United States and southern Canada. Various methods exist to evaluate for SWM resistance and many quantitative trait loci (QTL) with minor effect governing SWM resistance have been identified in prior studies. This study aimed to predict field resistance to SWM using low-cost and efficient greenhouse inoculation methods and to confirm the QTL reported in previous studies. Three related but independent studies were conducted in the field, greenhouse, and laboratory to evaluate for SWM resistance. The first study evaluated 66 soybean plant introductions (PIs) with known field resistance to SWM using the greenhouse drop-mycelium inoculation method. These 66 PIs were significantly (P < 0.043) different for resistance to SWM. However, year was highly significant (P < 0.00001), while PI x year interaction was not significant (P < 0.623). The second study compared plant mortality (PM) of 35 soybean breeding lines or varieties in greenhouse inoculation methods with disease severity index (DSI) in field evaluations. Moderate correlation (r) between PM under drop-mycelium method and DSI in field trials (r = 0.65, p < 0.0001) was obtained. The PM under spray-mycelium was also correlated significantly with DSI from field trials (r = 0.51, p < 0.0018). Likewise, significant correlation (r = 0.62, p < 0.0001) was obtained between PM across greenhouse inoculation methods and DSI across field trials. These findings suggest that greenhouse inoculation methods could predict the field resistance to SWM. The third study attempted to validate 33 QTL reported in prior studies using seven populations that comprised a total of 392 F4 : 6 lines derived from crosses involving a partially resistant cultivar "Skylla," five partially resistant PIs, and a known susceptible cultivar "E00290." The estimates of broad-sense heritability (h2) ranged from 0.39 to 0.66 in the populations. Of the seven populations, four had h2 estimates that were significantly different from zero (p < 0.05). Single marker analysis across populations and inoculation methods identified 11 significant SSRs (p < 0.05) corresponding to 10 QTL identified by prior studies. Thus, these five new PIs could be used as new sources of resistant alleles to develop SWM resistant commercial cultivars.

Analysis of seasonal expression levels of wheat fructan exohydrolase (FEH) genes regulating fructan metabolism involved in wintering ability.

In northern regions, winter wheat (Triticum aestivum L.) accumulates fructan during cold-acclimation in autumn and freeze-acclimation in early winter. The content of fructan in wheat crown tissues is associated with both freezing tolerance and snow mold resistance, and expression levels of fructan synthesis genes in leaf and crown tissue are correlated with both changes and varietal differences in fructan accumulation levels of wheat during cold- and freeze-acclimation. Fructan hydrolysis activity has also been thought be involved in wintering ability of wheat. Since several kinds of gene homologs encoding fructan exohydrolase (FEH: EC. 3.2.1.153, 154) with different substrate specificities have recently been cloned from wheat, changes in transcript levels of wheat FEH genes in field-grown wheat cultivars from autumn to spring were analyzed to investigate regulation of seasonal changes in fructan content. The seasonal expression patterns of five genes encoding 1-FEH, 6-FEH (and Wfh-sm3), 6&1-FEH and 6-KEH (kestose exohydrolase) varied. Among the five genes, only seasonal changes in the expression of wfh-sm3, which codes an enzyme that is able to hydrolyze almost all components of fructan that has accumulated in hardened wheat tissues, were correlated with those changes in fructan contents. Moreover, the transcript levels of wfh-sm3 were low in snow mold-resistant cultivars that accumulate high levels of fructan. The transcript levels of 6-FEH increased with decrease in ambient temperatures and the levels decreased under snow. The analysis indicated that cooperative expression of 6-FEH and 1-FEH genes might be related to the seasonal changes and varietal difference in mono- and disaccharide contents. This study showed that the coordinated expression of FEH genes in wheat was related to the regulation of water-soluble carbohydrate accumulation from autumn to early winter and fructan consumption under snow cover as well as energy supply and that wheat FEHs also play an important role in the varietal difference in freezing tolerance and snow mold resistance. In particular, the expression of wfh-sm3 may regulate fructan metabolism associated with tolerance for wintering stresses.