Micronutrient availability alters Candida albicans growth and farnesol accumulation: implications for studies using RPMI-1640.

Science is challenging because we do not know what we do not know. Commercial chemicals are often marketed with >99% purity, but 0.5-1% impurity can impact results and cloud data interpretation. We recently developed an assay for farnesol and aromatic fusel alcohols from Candida albicans. During proof-of-concept experiments using RPMI-1640 growth media, the buffering compound was switched from MOPS obtained from Acros Organics to MOPS obtained from Sigma-Aldrich, both labeled 99% + purity. We observed a twofold decrease in growth, along with a three- to fivefold increase in farnesol production per cell upon the switch. ICP-MS showed that trace Mn(II) was present in Acros MOPS but absent in Sigma MOPS. Optimal growth was achieved by the addition of Mn(II), Zn(II), and Fe(II). We established upper and lower limits for Fe(II), Zn(II), Cu(II), and Mn(II) that allowed similar growth and then assessed 16 different mineral combinations in RPMI-1640 base media. The results show an increased production of farnesol and the aromatic fusel alcohols when Zn(II) is abundant, and a further increase in the aromatic fusel alcohols when both Fe(II) and Zn(II) are abundant. Finally, antifungal susceptibility testing displayed no significant difference between RPMI/MOPS with and without mineral supplementation. Supplemental Mn(II) was most needed for cell growth, while supplemental Zn(II) was most needed for the production of farnesol and the aromatic fusel alcohols. To avoid these artifacts due to metal contamination, we now use a modified RPMI supplemented with 1 mg/ L of Cu(II), Zn(II), Mn(II), and Fe(II). IMPORTANCE: The dimorphic fungus Candida albicans is a major opportunistic pathogen of humans. RPMI-1640 is a chemically defined growth medium commonly used with C. albicans. We identified over 32,000 publications with keywords RPMI and C. albicans. Additionally, Antifungal Susceptibility Testing (AFST) protocols in the United States (CLSI) and Europe (EUCAST) utilize RPMI as a base media to assess drug efficacy against clinical fungal isolates. RPMI contains many nutrients but no added trace metals. We found that the growth characteristics with RPMI were dependent on which MOPS buffer was chosen and the contamination of that buffer by trace levels of Mn(II) and Zn(II). Added Mn(II) was most needed for cell growth while added Zn(II) was most needed for secretion of farnesol and other signaling molecules.

Unraveling the impact of pH, sodium concentration, and medium osmolality on Vibrio natriegens in batch processes.

BACKGROUND: Vibrio natriegens, a halophilic marine γ-proteobacterium, holds immense biotechnological potential due to its remarkably short generation time of under ten minutes. However, the highest growth rates have been primarily observed on complex media, which often suffer from batch-to-batch variability affecting process stability and performance. Consistent bioprocesses necessitate the use of chemically defined media, which are usually optimized for fermenters with pH and dissolved oxygen tension (DOT) regulation, both of which are not applied during early-stage cultivations in shake flasks or microtiter plates. Existing studies on V. natriegens' growth on mineral media report partially conflicting results, and a comprehensive study examining the combined effects of pH buffering, sodium concentration, and medium osmolality is lacking. RESULTS: This study evaluates the influence of sodium concentration, pH buffering, and medium osmolality on the growth of V. natriegens under unregulated small-scale conditions. The maximum growth rate, time of glucose depletion, as well as the onset of stationary phase were observed through online-monitoring the oxygen transfer rate. The results revealed optimal growth conditions at an initial pH of 8.0 with a minimum of 300 mM MOPS buffer for media containing 20 g/L glucose or 180 mM MOPS for media with 10 g/L glucose. Optimal sodium chloride supplementation was found to be between 7.5 and 15 g/L, lower than previously reported ranges. This is advantageous for reducing industrial corrosion issues. Additionally, an osmolality range of 1 to 1.6 Osmol/kg was determined to be optimal for growth. Under these optimized conditions, V. natriegens achieved a growth rate of 1.97 ± 0.13 1/h over a period of 1 h at 37 °C, the highest reported rate for this organism on a mineral medium. CONCLUSION: This study provides guidelines for cultivating V. natriegens in early-stage laboratory settings without pH and DOT regulation. The findings suggest a lower optimal sodium chloride range than previously reported and establish an osmolality window for optimal growth, thereby advancing the understanding of V. natriegens' physiology. In addition, this study offers a foundation for future research into the effects of different ions and carbon sources on V. natriegens.

Ultrasonic-Assisted Extraction and Gastrointestinal Digestion Characteristics of Polysaccharides Extracted from Mallotus oblongfolius.

The polysaccharides were extracted from the leaves of Mallotus oblongifolius (MO) using an ultrasonic-assisted extraction method in this study. The main variables affecting the yield of polysaccharides extracted from Mallotus appallatus (MOPS) were identified and optimized while concurrently investigating its antioxidant capacity, hypoglycemic activity, and digestive properties. The results indicated that the optimal ultrasound-assisted extraction of MOPS involved an ultrasound power of 200 W, a liquid-to-solid ratio of 25:1 (mL:g), an extraction temperature of 75 °C, and an ultrasound time of 45 min, leading to an extraction yield of (7.36 ± 0.45)% (m/m). The MOPS extract exhibited significant scavenging activity against DPPH and ABTS radicals with IC50 values of (25.65 ± 0.53) µg/mL and (100.38 ± 0.38) µg/mL, respectively. Furthermore, it effectively inhibited the enzymatic activities of α-glucosidase and α-amylase with IC50 values of (2.27 ± 0.07) mg/mL and (0.57 ± 0.04) mg/mL, respectively. The content of MOPS remained relatively stable in the stomach and small intestine; however, their ability to scavenge DPPH radicals and ABTS radicals and exhibit reducing power was attenuated, and the inhibition of α-amylase and α-glucosidase activity was diminished. In conclusion, the ultrasonic extraction of MOPS showed feasibility and revealed antioxidant and hypoglycemic effects. However, the activities were significantly reduced after gastric and small intestinal digestion despite no significant change in the MOPS content.

Current and future environmental suitability for bats hosting potential zoonotic pathogens in rural Kenya.

Synanthropic bats live in close proximity to humans and domestic animals, creating opportunities for potential pathogen spillover. We explored environmental correlates of occurrence for a widely distributed synanthropic African bat, Mops pumilus-a species associated with potential zoonotic viruses-and estimated current and future environmental suitability in the Taita Hills region and surrounding plains in Taita-Taveta County in southeast Kenya. To project future environmental suitability, we used four Coupled Model Intercomparison Project Phase 6 general circulation models that capture temperature and precipitation changes for East Africa. The models were parameterized with empirical capture data of M. pumilus collected from 2016 to 2023, combined with satellite-based vegetation, topographic, and climatic data to identify responses to environmental factors. The strongest drivers for current environmental suitability for M. pumilus were short distance to rivers, higher precipitation during the driest months, sparse vegetation-often related to urban areas-and low yearly temperature variation. To predict current and future areas suitable for M. pumilus, we created ensemble niche models, which yielded excellent predictive accuracies. Current suitable environments were located southward from the central and southern Taita Hills and surrounding plains, overlapping with urban centers with the highest human population densities in the area. Future projections for 2050 indicated a moderate increase in suitability range in the southern portion of the region and surrounding plains in human-dominated areas; however, projections for 2090 showed a slight contraction of environmental suitability for M. pumilus, potentially due to the negative impact of increased temperatures. These results show how environmental changes are likely to impact the human exposure risk of bat-borne pathogens and could help public health officials develop strategies to prevent these risks in Taita-Taveta County, Kenya, and other parts of Africa.

Accelarated Orthodontic Treatment Using Microosteoperforations: A Comparative Study.

Background: Accelerated orthodontic treatment has gained popularity in recent years as patients seek shorter treatment durations. Microosteoperforations (MOPs) have emerged as a minimally invasive technique to expedite tooth movement. This study aims to compare the effectiveness of MOPs in accelerating orthodontic treatment with conventional methods. Materials and Methods: A randomized controlled trial was conducted on 60 orthodontic patients requiring dental alignment. The participants were divided into two groups: Group A (MOPs) and Group B (conventional orthodontic treatment). In Group A, MOPs were performed at the beginning of the treatment. Both groups received monthly orthodontic adjustments. Treatment duration, rate of tooth movement, and patient discomfort were measured and compared between the two groups. Results: The study found that in Group A, the treatment duration was reduced by 30% compared to Group B (P < 0.05). The rate of tooth movement in the MOPs group was 1.5 times higher than the conventional group (P < 0.01). Additionally, patient-reported discomfort levels were similar between the two groups. No adverse events related to MOPs were observed during the study. Conclusion: MOPs significantly accelerate orthodontic treatment, reducing treatment duration by 30% and increasing the rate of tooth movement by 1.5 times compared to conventional methods. Importantly, MOPs are well-tolerated by patients, making them a valuable option for expediting orthodontic treatment with minimal discomfort. This study highlights the potential benefits of integrating MOPs into orthodontic practice to improve treatment efficiency and patient satisfaction.

Influx of zwitterionic buffer after intracytoplasmic sperm injection (ICSI) membrane piercing alters the transcriptome of human oocytes.

PURPOSE/STUDY QUESTION: Does piercing oocyte membranes during ICSI allow the influx of surrounding zwitterionic buffer into human oocytes and result in altered developmental competence? METHODS: Human oocytes directed to IRB-approved research were used to determine the unrestricted influx of surrounding buffer into the oocyte after piercing of membranes via confocal fluorescence microscopy (n = 80 human MII oocytes) and the influence of the select buffer influx of HEPES, MOPS, and bicarbonate buffer on the oocyte transcriptome using ultra-low input RNA sequencing (n = 40 human MII oocytes). RESULTS: Piercing membranes of human MII oocytes during sham-ICSI resulted in the unrestricted influx of surrounding culture buffer into the oocyte that was beyond technician control. Transcriptome analysis revealed statistically significant decreased cytoskeletal transcripts in the pierced buffer cohorts, higher levels of embryo competency transcripts (IGF2 and G6PD) in the bicarbonate buffer cohort, higher levels of stress-induced transcriptional repressor transcripts (MAF1) in the HEPES and MOPS cohorts, and decreased levels of numerous chromosomal maintenance transcripts (SMC3) in the HEPES buffer cohort. The HEPES buffer cohort also revealed higher levels of transcripts suggesting increased oxidative (GPX1) and lysosomal stress (LAMP1). CONCLUSION: The influence of zwitterionic buffer on intrinsic cellular mechanisms provides numerous concerns for their use in IVF clinical applications. The primary concern is the ICSI procedure, in which the surrounding buffer is allowed influx into the oocytes after membrane piercing. Selecting a physiological bicarbonate buffer may reduce imposed stress on oocytes, resulting in improved embryo development and clinical results because intracellular MOPS, and especially HEPES, may negatively impact intrinsic biological mechanisms, as revealed by transcriptome changes. These findings further support the utilization of bicarbonate buffer as the oocyte-holding medium during ICSI.

Identification of medium- and mechanism-related pitfalls towards improved performance and applicability of electrochemical mercury(II) aptasensors.

The importance of understanding the mercury (II) ion interactions with thymine-rich DNA sequences is the reason for multiple comparative investigations carried out with the use of optical detection techniques directly in the depth of solution. However, the results of such investigations have limited applicability in the interpretation of the Hg2+ binding phenomenon by DNA sequences in thin, interfacial (electrode/solution), self-organized monolayers immobilized on polarizable surfaces, often used for sensing purposes in electrochemical biosensors. Overlooking the careful optimization of the measurement conditions is the source of discrepancies in the interpretation of the registered electrochemical signal. In this study, the chosen effects accompanying the efficiency of surface related recognition of Hg2+ by polyThymine DNA sequences labelled with methylene blue were investigated by voltammetry, QCM and spectro-electrochemical techniques. As was shown, the composition of the biosensing layer and buffers or the analytical procedures have a significant impact on the registered electrochemical readout which translates into signal stability, the biosensor's working parameters or even the mechanism of detection. After elucidation of the above factors, the complete and ready-to-use biosensor-based analytical solution was proposed offering subpicomolar mercury ion determination with high selectivity (also in aqueous real samples), reusability, and high signal stability even after long-term storage. The developed procedures were successfully used during the miniaturization process with self-prepared (PVD) elastic transducers. The obtained sensor, together with the simplicity of its use, low manufacturing cost, and attractive analytical parameters (i.e., LOD < < Hg2+ WHO limit) can present an interesting alternative for on-site mercury ion detection in environmental samples.

The Good pH probe: non-invasive pH in-line monitoring using Good buffers and Raman spectroscopy.

In bioprocesses, the pH value is a critical process parameter that requires monitoring and control. For pH monitoring, potentiometric methods such as pH electrodes are state of the art. However, they are invasive and show measurement value drift. Spectroscopic pH monitoring is a non-invasive alternative to potentiometric methods avoiding this measurement value drift. In this study, we developed the Good pH probe, which is an approach for spectroscopic pH monitoring in bioprocesses with an effective working range between pH 6 and pH 8 that does not require the estimation of activity coefficients. The Good pH probe combines for the first time the Good buffer 3-(N-morpholino)propanesulfonic acid (MOPS) as pH indicator with Raman spectroscopy as spectroscopic technique, and Indirect Hard Modeling (IHM) for the spectral evaluation. During a detailed characterization, we proved that the Good pH probe is reversible, exhibits no temperature dependence between 15 and 40 °C, has low sensitivity to the ionic strength up to 1100 mM, and is applicable in more complex systems, in which other components significantly superimpose the spectral features of MOPS. Finally, the Good pH probe was successfully used for non-invasive pH in-line monitoring during an industrially relevant enzyme-catalyzed reaction with a root mean square error of prediction (RMSEP) of 0.04 pH levels. Thus, the Good pH probe extends the list of critical process parameters monitorable using Raman spectroscopy and IHM by the pH value.

Copy Number Variation Discovery in South African Nguni-Sired and Bonsmara-Sired Crossbred Cattle.

Crossbreeding forms part of Climate-Smart beef production and is one of the strategies to mitigate the effects of climate change. Two Nguni-sired and three Bonsmara-sired crossbred animals underwent whole genome sequencing. Following quality control and file preparation, the sequence data were investigated for genome-wide copy number variation (CNV) using the panelcn.MOPS tool. A total of 355 CNVs were identified in the crossbreds, of which 274 were unique in Bonsmara-sired crossbreds and 81 unique in the Nguni-sired crossbreds. Genes that differed in copy number in both crossbreds included genes related to growth (SCRN2, LOC109572916) and fertility-related factors (RPS28, LOC1098562432, LOC109570037). Genes that were present only in the Bonsmara-sired crossbreds included genes relating to lipid metabolism (MAF1), olfaction (LOC109569114), body size (HES7), immunity (LOC10957335, LOC109877039) and disease (DMBT1). Genes that were present only in the Nguni-sired crossbreds included genes relating to ketosis (HMBOX1) and amino acid transport (LOC109572916). Results of this study indicate that Nguni and Bonsmara cattle can be utilized in crossbreeding programs as they may enhance the presence of economically important traits associated with both breeds. This will produce crossbred animals that are good meat producers, grow faster, have high fertility, strong immunity and a better chance of producing in South Africa's harsh climate conditions. Ultimately, this study provides new genetic insights into the adaptability of Nguni and Bonsmara crossbred cattle.

Comparison of Caudal Block and Dexmedetomidine Infusion in Pediatric Patients Undergoing Hypospadias Repair Surgery: A Prospective, Randomized, Double-blinded Clinical Study.

Background: Many parents continue to reject caudal block since they worry about a rare neurological consequence that may happen. A parenteral surrogate is sought because it can induce recovery with features such as local analgesia. Objectives: To compare the efficacy and safety of intravenous dexmedetomidine versus caudal and general anesthesia (GA) in children undergoing hypospadias surgery repair. Methods: A randomized prospective study was conducted on 135 pediatric patients scheduled for hypospadias repair surgery in the hospital affiliated to Tanta University. The participants were divided into a control group (Group C) receiving GA, a caudal group receiving caudal block after GA, and a dexmedetomidine group (Group D) receiving intravenous dexmedetomidine after GA. The postoperative modified objective pain score (MOPS), the total pethidine received in the first 24 h postoperatively, and complications were recorded. Results: The patients receiving GA required a significantly higher pethidine dose than the other two groups without a significant difference between caudal and dexmedetomidine. The patients receiving dexmedetomidine were extubated significantly later than patients in the other two groups. Regarding the MOPS score, there was a significant difference between Group C and the other two groups 30 minutes and one hour after operation regarding movements, posture, and agitation. Moreover, a significantly larger number of patients developed tachycardia in Group C compared to the other groups. Conclusions: With the caudal block, the benefits of smooth emergency can be obtained by intravenous dexmedetomidine; however, it had less analgesic efficacy in the pediatric patients undergoing hypospadias repair surgery.

Mini-review on the novel synthesis and potential applications of carbazole and its derivatives.

Microporous organic polymers (MOPs) are a new type of porous materials, which have advantages of synthetic diversity, chemical and physical stability, microporous size controllability, etc. MOPs indicate broad applications in various fields such as heterogeneous catalysis, gas adsorption, separation, and storage. In recent years, MOPs have attracted an enormous attention in greenhouse gas capture due to their great potential in physisorptive gas storage. Carbazole and its derivatives have been studied extensively as Metal-Organic Polyhedra (MOPs) building blocks due to their unique structural features and versatile functionalization possibilities. This paper systematically reviews the synthesis, characterization and application of carbazole-based polymers, and relationship of structures and properties of these polymers. The application of the polymers in carbon dioxide (CO2) capture field is analysed taking advantage of their adjustable microporous structure and electron rich properties. This review also provides novel insights regarding functional polymer materials that have high ability of greenhouse gas capture and absorbing selectivity will be obtained by reasonable molecular design and efficient synthesis.

Porous Salts as Platforms for Heterogeneous Catalysis.

The preparation of a new class of reactive porous solids, prepared via straightforward salt metathesis reactions, is described here. Reaction of the dimethylammonium salt of a magnesium-based porous coordination cage with the chloride salt of [CrII Cl(Me4 cyclam)]+ affords a porous solid with concomitant removal of dimethylammonium chloride. The salt consists of the ions combined in the expected ratio based on their charge as confirmed by UV-vis and X-ray photoelectron spectroscopies, ion chromatography (IC), and inductively coupled plasma mass spectrometry (ICP-MS). The porous salt boasts a Brunauer-Emmett-Teller (BET) surface area of 213 m2  g-1 . Single crystal X-ray diffraction reveals the chromium(II) cations in the structure reside in the interstitial space between porous cages. Importantly, the chromium(II) centers, previously shown to react with O2 to afford reactive chromium(III)-superoxide adducts, are still accessible in the solid state as confirmed by UV-vis spectroscopy. The site-isolated reactive centers have competence toward hydrogen atom abstraction chemistry and display significantly increased stability and reactivity as compared to dissolved ions.

No Substantial Histopathologic Changes in Mops condylurus Bats Naturally Infected with Bombali Virus, Kenya.

We found similar mild perivascular inflammation in lungs of Bombali virus-positive and -negative Mops condylurus bats in Kenya, indicating the virus is well-tolerated. Our findings indicate M. condylurus bats may be a reservoir host for Bombali virus. Increased surveillance of these bats will be important to reduce potential virus spread.

Ammonia Capture in Rhodium(II)-Based Metal-Organic Polyhedra via Synergistic Coordinative and H-Bonding Interactions.

Ammonia (NH3) is among the world's most widely produced bulk chemicals, given its extensive use in diverse sectors such as agriculture; however, it poses environmental and health risks at low concentrations. Therefore, there is a need for developing new technologies and materials to capture and store ammonia safely. Herein, we report for the first time the use of metal-organic polyhedra (MOPs) as ammonia adsorbents. We evaluated three different rhodium-based MOPs: [Rh2(bdc)2]12 (where bdc is 1,3-benzene dicarboxylate); one functionalized with hydroxyl groups at its outer surface [Rh2(OH-bdc)2]12 (where OH-bdc is 5-hydroxy-1,3-benzene dicarboxylate); and one decorated with aliphatic alkoxide chains at its outer surface [Rh2(C12O-bdc)2]12 (where C12O-bdc is 5-dodecoxybenzene-1,3-benzene dicarboxylate). Ammonia-adsorption experiments revealed that all three Rh-MOPs strongly interact with ammonia, with uptake capacities exceeding 10 mmol/gMOP. Furthermore, computational and experimental data showed that the mechanism of the interaction between Rh-MOPs and ammonia proceeds through a first step of coordination of NH3 to the axial site of the Rh(II) paddlewheel cluster, which triggers the adsorption of additional NH3 molecules through H-bonding interaction. This unique mechanism creates H-bonded clusters of NH3 on each Rh(II) axial site, which accounts for the high NH3 uptake capacity of Rh-MOPs. Rh-MOPs can be regenerated through their immersion in acidic water, and upon activation, their ammonia uptake can be recovered for at least three cycles. Our findings demonstrate that MOPs can be used as porous hosts to capture corrosive molecules like ammonia, and that their surface functionalization can enhance the ammonia uptake performance.

Bombali Ebolavirus in Mops condylurus Bats (Molossidae), Mozambique.

We detected Bombali ebolavirus RNA in 3 free-tailed bats (Mops condylurus, Molossidae) in Mozambique. Sequencing of the large protein gene revealed 98% identity with viruses previously detected in Sierra Leone, Kenya, and Guinea. Our findings further support the suspected role of Mops condylurus bats in maintaining Bombali ebolavirus.

Kiwira Virus, a Newfound Hantavirus Discovered in Free-tailed Bats (Molossidae) in East and Central Africa.

A novel hantavirus, named Kiwira virus, was molecularly detected in six Angolan free-tailed bats (Mops condylurus, family Molossidae) captured in Tanzania and in one free-tailed bat in the Democratic Republic of Congo. Hantavirus RNA was found in different organs, with the highest loads in the spleen. Nucleotide sequences of large parts of the genomic S and L segments were determined by in-solution hybridisation capture and high throughput sequencing. Phylogenetic analyses placed Kiwira virus into the genus Mobatvirus of the family Hantaviridae, with the bat-infecting Quezon virus and Robina virus as closest relatives. The detection of several infected individuals in two African countries, including animals with systemic hantavirus infection, provides evidence of active replication and a stable circulation of Kiwira virus in M. condylurus bats and points to this species as a natural host. Since the M. condylurus home range covers large regions of Sub-Saharan Africa and the species is known to roost inside and around human dwellings, a potential spillover of the Kiwira virus to humans must be considered.

2,2'-Biphenol-based Ultrathin Microporous Nanofilms for Highly Efficient Molecular Sieving Separation.

Organic solvent nanofiltration (OSN) is an emerging membrane separation technology, which urgently requires robust, easily processed, OSN membranes possessing high permeance and small solutes-selectivity to facilitate enhanced industrial uptake. Herein, we describe the use of two 2,2'-biphenol (BIPOL) derivatives to fabricate hyper-crosslinked, microporous polymer nanofilms through IP. Ultra-thin, defect-free polyesteramide/polyester nanofilms (≈5 nm) could be obtained readily due to the relatively large molecular size and ionized nature of the BIPOL monomers retarding the rate of the IP. The enhanced microporosity arises from the hyper-crosslinked network structure and monomer rigidity. Specifically, the amino-BIPOL/PAN membrane exhibits extraordinary permselectivity performances with molecular weight cut-off as low as 233 Da and MeOH permeance of ≈13 LMH/bar. Precise separation of small dye mixtures with similar M.W. based on both their charge and molecular size are achieved.

Dual Drug Loaded, pH-Sensitive Metal-Organic Particles for Synergistic Cancer Therapy.

The strategy for dual drug-loaded nanomedicine with targeting properties was always complex. Herein, a novel strategy for the preparation of metal-organic particle-based nanomedicine has been developed, and combretastatin A4 (CA4) and mitoxantrone (MIT) loaded MOPs (CMMOPs) have been obtained. In this system, using merely Cu(II) as a bridge to connect and coordinate with the dual drugs has resulted in the CMMOPs possessing a fairly high drug load of almost 90%. Moreover, the coordination between Cu(II) and the drugs was stable at physiological pH but easily cleavable in the tumor acidic microenvironment, which would provide a good targeting property for CMMOPs. The in vivo experiments indicated that CMMOPs possessed a significantly enhanced antitumor efficiency with negligible side effects. The results suggest that CMMOPs could be a potential anticancer formulation for tumor-targeted drug delivery.

Evaluation of the Effectiveness of Surgical Interventions Versus Non-surgical Ones When Used in Conjunction With Fixed Appliances to Accelerate Orthodontic Tooth Movement: A Systematic Review.

The objectives of this review were to evaluate the currently available evidence regarding the effectiveness of surgical versus non-surgical acceleration methods and the side effects associated with these methods. Nine databases were searched: the Cochrane Central Register of Controlled Trials (CENTRAL), EMBASE®, Scopus®, PubMed®, Web of Science™, Google™ Scholar, Trip, OpenGrey, and PQDT OPEN from pro-Quest®. ClinicalTrials.gov and the International Clinical Trials Registry Platform Search Portal (ICTRP) were screened to explore ongoing studies and unpublished literature. Randomized controlled trials (RCTs), as well as controlled clinical trials (CCTs) of patients who received surgical interventions (invasive or minimally invasive techniques) in conjunction with traditional fixed appliances and who were compared to the non-surgical interventions, were included. The Cochrane tool for risk of bias (RoB.2) was used for evaluating RCTs, whereas the ROBINS-I tool was used for the CCTs. This systematic review included four RCTs and two CCTs (154 patients). The surgical and non-surgical interventions were found to have the same effect on orthodontic tooth movement (OTM) accelerating in four trials. In contrast, the surgical interventions were superior in the other two studies. High heterogeneity among the included studies prevented conducting the quantitative synthesis of the findings. The reported side effects related to the surgical and non-surgical interventions were similar. A "very low" to "low" evidence indicates that the effectiveness of surgical and non-surgical interventions in the acceleration of orthodontic tooth movement is similar, with no differences in the associated side effects. More high-quality clinical trials to compare the acceleration effectiveness between both modalities in different types of malocclusion is required.

Recent developments in Moringa oleifera Lam. polysaccharides: A review of the relationship between extraction methods, structural characteristics and functional activities.

Moringa oleifera Lam. (M. oleifera Lam) is a perennial tropical deciduous tree that belongs to the Moringaceae family. Polysaccharides are one of the major bioactive compounds in M. oleifera Lam and show immunomodulatory, anticancer, antioxidant, intestinal health protection and antidiabetic activities. At present, the structure and functional activities of M. oleifera Lam polysaccharides (MOPs) have been widespread, but the research data are relatively scattered. Moreover, the relationship between the structure and biological activities of MOPs has not been summarized. In this review, the current research on the extraction, purification, structural characteristics and biological activities of polysaccharides from different sources of M. oleifera Lam were summarized, and the structural characteristics of purified polysaccharides were focused on this review. Meanwhile, the biological activities of MOPs were introduced, and some molecular mechanisms were listed. In addition, the relationship between the structure and biological activities of MOPs was discussed. Furthermore, new perspectives and some future research of M. oleifera Lam polysaccharides were proposed in this review.