Spatial analysis to identify unauthorized municipal solid waste disposal sites in rural areas of southern Mexico.

The management of solid waste in rural areas of developing countries faces significant challenges due to economic constraints and irregular human settlements. These factors often lead to the creation of unauthorized disposal sites, which pose risks to human health, ecosystems and the economy. Remote sensing and geographic information system techniques provide a means to understand the complex issues associated with inadequate municipal solid waste (MSW) disposal. This study aimed to identify unauthorized disposal sites in the rural areas of southern Quintana Roo, Mexico, by examining land surface temperature (LST) and vegetation indices as potential indicators of unauthorized final disposal sites (FDSs). The findings reveal that 13% of the study areas have a high, moderate or low probability of hosting unauthorized disposal sites. Additionally, 3 authorized final disposal sites (FDSs) were confirmed, and 20 unauthorized sites were identified. LST and the normalized difference vegetation index were effective in detecting unauthorized sites, as these areas exhibited higher temperatures and less vigorous vegetation compared to adjacent areas. The results provide valuable insights into the issues associated with inadequate waste disposal in rural areas and offer information that can help optimize MSW management and mitigate its environmental and health impacts.

Waste management optimization with NLP modeling and waste-to-energy in a circular economy.

This work presents a methodology integrating Non-Linear Programming (NLP) for multi-objective and multi-period optimization, addressing sustainable waste management and energy conversion challenges. It integrates waste-to-energy (WtE) technologies such as Anaerobic Digestion (AD), Incineration (Inc), Gasification (Gsf), and Pyrolysis (Py), and considers thermochemical, technical, economic, and environmental considerations through rigorous non-linear functions. Using Mexico City as a case study, the model develops waste management strategies that balance environmental and economic aims, considering social impacts. A trade-off solution is proposed to address the conflict between objectives. The economical optimal solution generates 1.79M$ with 954 tons of CO2 emissions while the environmental one generates 0.91M$ and reduces emissions by 54%, where 40% is due to gasification technology. Moreover, the environmentally optimal solution, with incineration and gasification generates 9500 MWh/day and 5960 MWh/day, respectively, demonstrates the capacity of the model to support sustainable energy strategies. Finally, this work presents an adaptable framework for sustainable waste management decision-making.

Solving the waste bin location problem with uncertain waste generation rate: A bi-objective robust optimization approach.

An efficient municipal solid waste (MSW) system is critical to modern cities in order to enhance sustainability and liveability of urban life. With this aim, the planning phase of the MSW system should be carefully addressed by decision makers. However, planning success is dependent on many sources of uncertainty that can affect key parameters of the system, for example, the waste generation rate in an urban area. With this in mind, this article contributes with a robust optimization model to design the network of collection points (i.e. location and storage capacity), which are the first points of contact with the MSW system. A central feature of the model is a bi-objective function that aims at simultaneously minimizing the network costs of collection points and the required collection frequency to gather the accumulated waste (as a proxy of the collection cost). The value of the model is demonstrated by comparing its solutions with those obtained from its deterministic counterpart over a set of realistic instances considering different scenarios defined by different waste generation rates. The results show that the robust model finds competitive solutions in almost all cases investigated. An additional benefit of the model is that it allows the user to explore trade-offs between the two objectives.

Study of a Fire-Resistant Plate Containing Fly Ashes Generated from Municipal Waste Incinerator: Fire and Mechanical Characteristics and Environmental Life Cycle Assessment.

The recycling of fly ash from municipal solid waste incineration is currently a global issue. This work intends to examine the viability of a novel recycling alternative for fly ashes as a component of fire-resistant plates. To lessen the quantity of heavy metal leaching, the fly ash was utilized after being washed using a water/fly ash ratio of 2 for one hour. Subsequently, an inexpensive, straightforward molding and curing process was used to create a plate, with a composition of 60%wt of MSWI-FA, 30%wt of gypsum, 0.5%wt of glass fiber and 9.5%wt of vermiculite. The plate exhibited high fire resistance. Furthermore, it demonstrated compression, flexural strength and surface hardness slightly lower than the requirements of European Standards. This allows for manufacturing plates with a high washed MSWI-FA content as fire protection in firewalls and doors for homes and commercial buildings. A Life Cycle Assessment was carried out. The case study shows that a 60% substitution of gypsum resulted in an environmental impact reduction of 8-48% for all impact categories examined, except four categories impacts (marine eutrophication, human toxicity (cancer), human non-carcinogenic toxicity and water depletion, where it increased between 2 and 718 times), due to the previous washing of MSWI-FA. When these fly ashes are used as a raw material in fire-resistant materials, they may be recycled and offer environmental advantages over more conventional materials like gypsum.

Use of life cycle assessment for estimating impacts of waste-to-energy technologies in solid waste management systems: the case of Buenos Aires, Argentina.

Analysing municipal solid waste (MSW) management scenarios is relevant for planning future policies and actions toward a circular economy. Life cycle assessment (LCA) is appropriate for evaluating technologies of MSW treatment and their environmental impacts. However, in developing countries, advanced assessments are difficult to introduce due to the lack of technical knowledge, data and financial support. This research aims to assess the main potentialities of the introduction of waste-to-energy (WtE) systems in a developing Argentinean urban area considering the existing regulations about MSW recycling goals. The study was conducted with WRATE software and the proposed scenarios were current management, grate incineration of raw MSW and incineration of solid recovered fuel (SRF). In addition, a sensitivity analysis on the energy matrix was included. It was found that the production of SRF allows increasing the energy generation from waste by 200% and reducing the environmental impact of about 10% regarding the current MSW management system. Acidification Potential and Abiotic Depletion Potential were sensitive to changes in electricity mix. Results showed that if MSW reduction goals are achieved, changes in MSW composition will affect the performance of WtE plants and, in some cases, they will be not technically feasible. The outcomes of this study can be of interest for developing countries stakeholders and practitioners interested in LCA and sustainable MSW management.

Reflections on COVID-19 pandemic and waste management in developing countries: A case study in São Paulo city, Brazil.

COVID-19 pandemic has changed several aspects in human behaviour, whereas population mobility patterns have been strongly affected by social distancing. In parallel, changes in solid waste generation patterns have been reported worldwide. This work assessed the influence of the COVID-19 pandemic on waste generation and collection in São Paulo city, Brazil, the largest city of Latin America. Data on nine types of wastes collected between 2013 and 2021 were obtained, and the quantities of wastes collected before and during the pandemic were compared. These data were also discussed in light of data on COVID-19 cases and rates of social distancing and mobility. An increase in the amount of recyclables collected during the first wave of COVID-19 (March to September 2020) was observed. Decreases in the quantities of construction, demolition and bulky wastes (first wave of COVID-19) and farmers market wastes (second wave - October 2020 to February 2021) were also evidenced. The quantities of medical wastes collected during the pandemic significantly increased. The amount of residential wastes was lower than the mean for the pre-pandemic period during the first months of COVID-19. Thus, changes in lifestyle and consumption patterns of the population of São Paulo city seem to have affected solid waste generation during the pandemic, which reinforces the need of implementing solid waste management policies based on a diagnostic that characterise and consider these changes.

Implementation of anaerobic digestion for valorizing the organic fraction of municipal solid waste in developing countries: Technical insights from a systematic review.

Anaerobic digestion (AD) as a waste management strategy for the organic fraction of municipal waste (OFMSW) has received attention in developed countries for several decades, leading to the development of large-scale plants. In contrast, AD of OFMSW has only recently drawn attention in developing countries. This systematic review was carried out to investigate the implementation of AD to treat the OFMSW in developing countries, focusing on assessing pilot and full-scale AD plants reported in the last ten years. Studies that met the selection criteria were analyzed and data regarding operating parameters, feedstock characteristics, and biogas, digestate, and energy production were extracted. As outlined in this systematic review, AD plants located in developing countries are mostly one-stage mesophilic systems that treat OFMSW via mono-digestion, almost exclusively with the aim of producing electrical energy. Based on the analysis done throughout this systematic review, it was noted that there is a large difference in the maturity level of AD systems between developing and developed countries, mainly due to the economic capacity of developed countries to invest in sustainable waste management systems. However, the number of AD plants reported in scientific papers is significantly lower than the number of installed AD systems. Research articles regarding large-scale implementation of AD to treat OFMSW in developed countries were analyzed and compared with developing countries. This comparison identified practices used in plants in developed countries that could be utilized in the large-scale implementation and success of AD in developing countries. These practices include exploiting potential products with high market-values, forming partnerships with local industries to use industrial wastes as co-substrates, and exploring different biological and physical pretreatment technologies. Additionally, the analysis of capital and operational costs of AD plants showed that costs tend to be higher for developing countries due to their need to import of materials and equipment from developed countries. Technical, economical, and political challenges for the implementation of AD at a large-scale in developing countries are highlighted.

Advancing plastic pollution hotspotting at the subnational level: Brazil as a case study in the Global South.

Identifying sources is crucial for proposing effective actions to combat marine litter pollution. Here, we used an innovative approach to identify hotspots of mismanaged plastic waste (MPW) within Brazil and subsequent leakage to the ocean, based on population density, socio-economic conditions, municipal solid waste management and environmental parameters. We estimated plastic waste generation and MPW for each of the 5570 Brazilian municipalities, which totaled 3.44 million metric tons per year. Then, we estimated the probability of litter mobilization and transport (P) and the relative risk of leakage to the ocean (MPW × P). The Guanabara Bay and La Plata River comprised the main oceanic entry hotspots of litter produced in Brazil. The use of national databases allowed us to increase spatial and temporal granularity, offering a detailed baseline for the application of prevention and mitigation actions. However, overcoming data limitations is still a challenge in Brazil as in other Global South countries.

Heavy metal contamination in soils of a decommissioned landfill southern Brazil: Ecological and health risk assessment.

The incorrect disposal of waste negatively influences the population's quality of life and harms the environment. In Brazil, waste disposal in the open air is still a reality, which generates concerns about the contamination of the areas surrounding these dumpsites. The present work evaluated the possible environmental risks of a deactivated dumpsite in southern Brazil. The soil was characterized by physical and chemical tests, emphasizing the analysis of heavy metals Al, Fe, Cu, Mn, and Zn. Using geostatistical tools, it was possible to determine the distribution of these heavy metals in the influence of the landfill, since the metals Mn, Fe, and Zn showed a significant difference about the reference soil, indicating that they came from leaching from the landfill. The dispersion of the metals along the slope showed a tendency towards mobility since the highest concentrations were at elevations below the landfill. The area was considered contaminated due to the high scores of the evaluated indexes pollution, as the Improved Nemerow Pollution Index, which considers pollutant concentration, toxicity, and environmental impact to provide a measure of contamination, and was equivalent to 6.44, indicating that the area is contaminated. However, it presented low ecological risks, with a potential ecological risk of 18.55. As well as low risks to human health, with hazard index below the limit considered critical to health (HI < 1). Thus, the results of this study showed that the metals are released around the deactivated deposit, which compromises the environmental safety of the site, mainly due to its proximity to bodies of water that supply the region. Thus, the permanent control and monitoring of the areas of deactivated dumpsites are essential to avoid further pollution and should be included in the management plans for deactivating these deposits throughout the country.

COVID-19, waste production and municipal recycling programs: Insights from Chile to the global south.

The amount and characterization of municipal and industrial waste generated in numerous cities worldwide have changed dramatically in recent years due to the COVID-19 pandemic. Consequently, assessing the impact of COVID-19-related policies is important to provide decision-makers with adequate knowledge to respond effectively to future events and create successful policies that respond to specific contexts. This study focuses on Chile, Latin America's second-largest municipal and industrial solid waste producer, with tight quarantine procedures placed to prevent the virus from spreading, and a series of monetary incentives implemented to minimize the economic and social impact of the quarantines. The time series of municipal solid waste (MSW) and recycling in the metropolitan region show a decrease in the amount collected during the initial months of lockdown and a subsequent increase during monetary incentive implementation. The country recovered and exceeded pre-pandemic MSW generation and recycling levels. Furthermore, the lockdown and the withdrawal of retirement funds (WRF) had a varied impact on each municipality in the region. However, WRF had a larger direct impact than a lockdown, indicating that purchasing power has a greater impact than mobility in waste generation and recycling, at least in this region of Chile.

Effect of COVID-19 pandemic on municipal solid waste generation: a case study in Granada city (Spain).

The 2020 coronavirus pandemic has involved a series of political and social measures that have been adapted to the spread of the disease. Apart from the severe effects on health sector, the most effects of the pandemic have been felt in households and day-to-day life. Consequently, COVID-19 has had a significant impact on the generation of not only medical and health care waste but also of municipal solid waste production and composition. In this context, this work studied the implications of COVID-19 for municipal solid waste generation in Granada, Spain. Granada is a city where the economy is based mainly on the services sector, tourism and the University. Therefore, the impact of COVID-19 pandemic has greatly affected the city and it can be analyzed through the municipal solid waste generation. For the study of the incidence of COVID-19 in the generation of waste a period that goes from March 2019 to February 2021 has been chosen. The results show that, in the global calculation, a decrease in the generation of waste in the city is observed in this last year, reaching - 13.8%. Regarding the organic-rest fraction, the decrease in the COVID year represents - 11.7%. However, bulky waste has shown an increase in the COVID year which may be related to higher home furnishings renovation rates than in other years. Finally, glass is the waste flow that best indicates the effect of COVID in the service sector. In leisure areas, a significant reduction in the collection of glass is observed (- 45%). Supplementary Information: The online version contains supplementary material available at 10.1007/s10163-023-01671-2.

Effects of capping on microbial populations and contaminant immobilization in an old unlined landfill.

This research aimed at evaluating the effects of capping on the mitigation of impacts generated by a closed unlined landfill in São Carlos, SP, Brazil. Physicochemical and microbiological analyses (16S rRNA sequencing) of buried solid waste samples were performed, in capped and uncapped areas. Even though leachate pockets could still be encountered in capped areas, the capping construction reduced oxygen availability and created more reducing conditions, propitiating the development of sulfate-reducing bacteria and possibly contributing to the precipitation of the metals Pb, Cd, Ni, Co, As, and Zn as metal sulfides, causing their immobilization. The microbial populations adapted to the anaerobic conditions created under capped zones belonged to the phyla Firmicutes, Chloroflexi, and Euryarchaeota and the genera Methanosaeta, Hydrogenispora, Smithella, and Gelria. Differently, the phyla Acidobacteria, Proteobacteria, Bacteroidetes, and Actinobacteria were more abundant in samples from the uncapped zones, in which the abundance of different genera varied homogeneously. Methanogenic activity was not impaired by the intervention measure, as assessed by the specific methanogenic activity (SMA). Capping of old unlined landfills brings benefits to the immobilization of metals and does not impair microbial degradation, being effective for the mitigation of impacts on soils and water resources.

SARS-CoV-2 surveillance-based on municipal solid waste leachate in Brazil.

Municipal solid waste leachate-based epidemiology is an alternative viral tracking tool that applies fresh truck leachate as an early warning of public health emergencies. This study aimed to investigate the potential of SARS-CoV-2 surveillance based on solid waste fresh truck leachate. Twenty truck leachate samples were ultracentrifugated, nucleic acid extracted, and real-time RT-qPCR SARS-CoV-2 N1/N2 applied. Viral isolation, variant of concern (N1/N2) inference, and whole genome sequencing were also performed. SARS-CoV-2 was detected on 40% (8/20) of samples, with a concentration from 2.89 to 6.96 RNA Log10 100 mL-1. The attempt to isolate SARS-CoV-2 and recover the whole genome was not successful; however, positive samples were characterized as possible pre-variant of concern (pre-VOC), VOC Alpha (B.1.1.7) and variant of interest Zeta (P.2). This approach revealed an alternative tool to infer SARS-CoV-2 in the environment and may help the management of local surveillance, health, and social policies.

Municipal solid waste management with recyclable potential in developing countries: Current scenario and future perspectives.

Municipal solid waste (MSW) is a complex challenge to be solved worldwide, intensified in developing countries since in addition to economic and environmental aspects there is also the social aspect represented by the collector individual. From an integrative bibliographic review this study longitudinally analyses the socio-productive inclusion of collectors in the municipal solid waste management (MSWM) at an international level. Aiming: (a) to identify relevant articles describing/studies on MSWM with social inclusion of scavengers around the world; (b) to analyse these articles in order to present its main characteristics; (c) to describe municipal solid waste management with recyclable potential (MSWRP) with socio-productive inclusion of collectors; (d) the study provides a more detailed summary of MSWRP management in some developing countries: Brazil, China, India, Indonesia, Mexico, Nigeria and Pakistan; and (e) to provide a framework indicating the future practices and perspectives of MSWRP. As result, this study presents the paradigms and future questions for an effective improvement of WSWM, such as: Professional Training of Scavengers, Cultural Issues, Empowerment of Scavenger, Recycling Cooperatives and Cooperativism, Policy Issues and Recycling Chain, Management Systems and Process Improvement, Quality of Services Provided, Circular Economy and Informal Sector, Health Quality and Safety at Work, Barriers and Solutions for the Inclusion of the Informal Sector, Environmental, Economic and Social Benefits.

Comparative Analysis of the Implementation of Support Vector Machines and Long Short-Term Memory Artificial Neural Networks in Municipal Solid Waste Management Models in Megacities.

The development of methodologies to support decision-making in municipal solid waste (MSW) management processes is of great interest for municipal administrations. Artificial intelligence (AI) techniques provide multiple tools for designing algorithms to objectively analyze data while creating highly precise models. Support vector machines and neuronal networks are formed by AI applications offering optimization solutions at different managing stages. In this paper, an implementation and comparison of the results obtained by two AI methods on a solid waste management problem is shown. Support vector machine (SVM) and long short-term memory (LSTM) network techniques have been used. The implementation of LSTM took into account different configurations, temporal filtering and annual calculations of solid waste collection periods. Results show that the SVM method properly fits selected data and yields consistent regression curves, even with very limited training data, leading to more accurate results than those obtained by the LSTM method.

Development of waste-to-energy through integrated sustainable waste management: the case of ABREN WtERT Brazil towards changing status quo in Brazil.

In the context of circular economy, it is known that once waste is generated, it should be subject to proper treatment for recovering material or energy before being disposed. Many countries worldwide, especially developing countries such as Brazil, have been struggling to effectively apply sustainable waste management in municipalities and still rely on dumpsites and unsuitable landfills. Misinformation, a weak legal framework, lack of financial resources and poor infra-structure as well as pressure from organizations profiting from the expansion of landfills are some factors contributing to the preservation of the negative status quo: the "landfill culture". Material recovery, i.e., recycling and composting, is applied to less than 5% of Brazilian municipal waste, while 95% is disposed of in landfills or dumpsites. In this context, ABREN WtERT (Waste-to-Energy Research and Technology Council) Brazil was created in 2019 as the first permanent organization formed to promote the development of energy and material recovery from waste focused on the waste-to-energy (WTE) market. In this paper, the strategy proposed and implemented by the organization towards changing the status quo in Brazil through an integrated sustainable waste management approach is described. The proposed strategy integrates the concepts of Sustainability and Circular Economy for minimizing landfill disposal (avoiding methane emissions) and maximizing material/energy recovery. Among others, the approach focuses on changing the public opinion regarding thermal treatment facilities, mainly incinerators, which has been wrongly linked to pollution, excessive public expenditures and considered a harm to the recycling industry. The activities performed by ABREN include engaging public and private institutions, enhancing education, leading the publication of research and business studies, gathering industry members and academy experts, as well as creating strategic alliances with players around the globe. As a result, within a few years, major outcomes were achieved in Brazil, such as: (i) changes in the legal framework, (ii) launching of a specific public auction category for sponsoring electricity production from WTE facilities, and (iii) establishment of official targets for municipalities to decrease landfill disposal and increase recycling/biological treatment and energy recovery from thermal treatment. Among the national goals, it should be highlighted the target regarding the increase from zero to 994 MW of electricity production from municipal solid waste, which will require building dozens of new WTE facilities. Global outcomes are expected as well since Brazil is the seventh largest country of the globe and the most influential in Latin America. International and national business deals should thrive due to the need of operational skills and technology imports, and the avoidance of carbon emissions will positively reflect the world climate. In parallel, there is also potential for the academy to benefit from research projects and investments if the WTE national industry is to be developed in the long term.

An overview of in situ testing and geophysical methods to investigate municipal solid waste landfills.

Municipal solid waste (MSW) management is challenging as a whole. Global waste generation is expected to continue to increase in the coming years, and landfills are currently the primary destination. Therefore, the stability of these structures must be carefully evaluated to prevent failures and associated health and pollution risks, which implies the determination of waste properties using more reliable approaches. This paper presents a scoping review of field data from MSW landfills and outlines suggestions for future work. Studies published in the past twenty years were selected following a systematic search process in databases. Aspects discussed include (1) strength parameters and soil behavior type from in situ testing, (2) elastic moduli from seismic wave propagation, and (3) moisture content from geoelectrical measurements. Although the values of geotechnical parameters have varied due to waste heterogeneity and applied methods, the trends observed with depth and age could be compared. Research opportunities involve the spatial analysis of mechanical properties at a given site, seismic response of landfills with high organic content and saturation degree, interpretation of long-term resistivity monitoring, and combination of electrical properties to assess the degradation stages within the waste mass.

Application of a sustainable location index approach to landfill site selection in Monterrey, Mexico.

Landfilling is the main method to manage municipal solid waste (MSW) in Latin America due to the economic, technological and political characteristics of the region. The disposal of MSW in landfill sites may affect the quality of the environment and compromise a considerable share of the municipal budgets. The selection of suitable sites reduces the environmental and economic impact of landfills. In the present study the sustainable location index (SLI) is proposed as a methodology to assess environmentally, and economically, sanitary landfill site selection in the Metropolitan Area of Monterrey, a representative large-size city of Latin America. EVIAVE methodology was modified to include administrative and economic dimensions, which are assessed as a sustainable approach using together the SLI integrated with geospatial and multicriteria analysis tools. The assessment showed that the zones with the lowest SLI changes drastically when the importance of the economic or environmental factor varies. This result suggest that the inclusion of sustainability in landfill site selection decision-making is complex and it may requires the inclusion of local particularities such as municipal budgets, policies of MSW management and public perception about environmental deterioration.

Soil degradation and Cu, Cr, Ni, Pb and Zn contamination in dumpsites of humid and semiarid tropical regions in northeastern Brazil.

We investigated soil characteristics and heavy metal content changes in 12 inactive dumpsites in humid and semiarid tropical climates in Northeast Brazil. The metals Cu, Cr, Ni, Pb and Zn in soil samples were determined by atomic absorption spectrophotometry. Other parameters measured include pH, electric conductivity, soil texture, soil organic carbon, total porosity and available P. The soil contents of sand, clay, soil organic carbon, available P and heavy metals, and soil bulk density, total porosity and pH were efficient indicators of soil degradation. We found no influence of current use, soil class or climate on the soil response. The mean concentrations of heavy metals in the dumpsite soils followed the order Zn (49.96 mg kg-1) > Cu (38.48 mg kg-1) > Pb (24.64 mg kg-1) > Cr (21.94 mg kg-1) > Ni (7.77 mg kg-1). They were 6- to 36-fold higher than the background values for the region and were above the Brazilian guideline values for metals. The four dumpsite soils that showed simultaneous contamination with two or more heavy metals were located in the semiarid region. This challenges the assumption that soil impacts in the semiarid region are minimal due to lower leaching and high evaporation. Soil changes increase with time under activity, size and decommission time of the dumpsite. These data are important for local authorities to establish more effective targeting policies for closure of dumps and control of the spread of contaminants in areas impacted by the disposal of municipal waste.

Challenges to reducing post-consumer plastic rejects from the MSW selective collection at two MRFs in São Paulo city, Brazil.

​The present study is concerned with an overview of the main aspects of the selective collection from the municipal solid waste in São Paulo City and the limitations of its two automated Material Recovery Facilities (MRFs) to tackle the problem of reducing recyclable plastic waste sent to landfills as rejects. The research aimed to characterize the composition of screened mass flows of as-received mixes from the selective collection at the two MRFs through in situ random collection campaigns. The results of the gravimetric analysis have shown that both MRFs provided higher recovery yields (> 40%) for paper, cardboard, Tetrapack®, ferrous and non-ferrous metals (aluminium), akin to some post-consumer plastics (PET, HDPE/LDPE and PP) that ranged from 38% for PP up to 89% for HDPE, Losses in recovery yields of recyclable plastics after the screening process resulted from lack of clear resin label identification, inefficient materials sortation by households and poor recognition capabilities of the MRFs screening devices to target and segregate specific types of plastics such as PS and vinylic. Packaging design complexity, multi-layered material diversity, and food contaminated post-consumer packaging pose further challenges to improve the plastics recovery capabilities of the two MRFs.