The therapeutic potential of reduced graphene oxide in attenuating cuprizone-induced demyelination in mice.

Reduced graphene oxide (rGO) has unique physicochemical properties that make it suitable for therapeutic applications in neurodegenerative scenarios. This study investigates the therapeutic potential of rGO in a cuprizone-induced demyelination model in mice through histomorphological techniques and analysis of biochemical parameters. We demonstrate that daily intraperitoneal administration of rGO (1 mg ml-1) for 21 days tends to reduce demyelination in theCorpus callosumby decreasing glial cell recruitment during the repair mechanism. Additionally, rGO interferes with oxidative stress markers in the brain and liver indicating potential neuroprotective effects in the central nervous system. No significant damage to vital organs was observed, suggesting that multiple doses could be used safely. However, further long-term investigations are needed to understand rGO distribution, metabolism, routes of action and associated challenges in central neurodegenerative therapies. Overall, these findings contribute to the comprehension of rGO effectsin vivo, paving the way for possible future clinical research.

Structural, magnetic, and luminescent properties of NaGdF4:Nd3+@Fe3O4nanocomposites.

The diverse applications of nanomaterials, and their rapidly increasing demand, have spurred the development of novel multifunctional materials. As such, this study aimed to synthesize and characterize a magneto-luminescent nanocomposite, composed of magnetite and fluorescent quantum dots (NaGdF4:Nd3+@Fe3O4). Nanomaterial synthesis was accomplished through solvothermal and co-precipitation methods. Stable nanoparticles (NPs) with a zeta potential of -19.57 ± 0.42 mV, and a size of 4.55 ± 1.44 nm were obtained. The crystalline structure of the NPs, verified via x-ray diffraction, affirmed the hexagonal pattern of the NaGdF4:Nd3+NPs and the inverse spinel pattern of Fe3O4NPs. In the diffraction pattern of the NaGdF4:Nd3+@Fe3O4NPs, only the phase pertaining to the Fe3O4NPs was identified, indicating their influence on the nanocomposite. Magnetic measurements revealed the superparamagnetic behavior of the material. Photoluminescence spectra of NaGdF4:Nd3+and NaGdF4:Nd3+@Fe3O4NPs verified the luminescent emission around 1060 nm; a feature of the radiative transitions of Nd3+ions. Based on the assessed characteristics, the nanocomposite's multifunctionality was confirmed, positioning the material for potential use in various fields, such as biomedicine.

Red and near-infrared light-activated photoelectrochemical nanobiosensors for biomedical target detection.

Photoelectrochemical (PEC) nanobiosensors integrate molecular (bio)recognition elements with semiconductor/plasmonic photoactive nanomaterials to produce measurable signals after light-induced reactions. Recent advancements in PEC nanobiosensors, using light-matter interactions, have significantly improved sensitivity, specificity, and signal-to-noise ratio in detecting (bio)analytes. Tunable nanomaterials activated by a wide spectral radiation window coupled to electrochemical transduction platforms have further improved detection by stabilizing and amplifying electrical signals. This work reviews PEC biosensors based on nanomaterials like metal oxides, carbon nitrides, quantum dots, and transition metal chalcogenides (TMCs), showing their superior optoelectronic properties and analytical performance for the detection of clinically relevant biomarkers. Furthermore, it highlights the innovative role of red light and NIR-activated PEC nanobiosensors in enhancing charge transfer processes, protecting them from biomolecule photodamage in vitro and in vivo applications. Overall, advances in PEC detection systems have the potential to revolutionize rapid and accurate measurements in clinical diagnostic applications. Their integration into miniaturized devices also supports the development of portable, easy-to-use diagnostic tools, facilitating point-of-care (POC) testing solutions and real-time monitoring.

Effect of hyaluronic acid-stabilized silver nanoparticles on lettuce (Lactuca sativa L.) seed germination.

Nanotechnology has brought significant advancements to agriculture through the development of engineered nanomaterials (ENPs). Silver nanoparticles (AgNPs) capped with polysaccharides have been applied in agricultural diagnostics, crop pest management, and seed priming. Hyaluronic acid (HA), a natural polysaccharide with bactericidal properties, has been considered a growth regulator for plant tissues and an inducer of systemic resistance against plant diseases. Additionally, HA has been employed as a stabilizing agent for AgNPs. This study investigated the synthesis and effects of hyaluronic acid-stabilized silver nanoparticles (HA-AgNPs) as a seed priming agent on lettuce (Lactuca sativa L.) seed germination. HA-AgNPs were characterized using several techniques, exhibiting spherical morphology and good colloidal stability. Germination assays conducted with 0.1, 0.04, and 0.02 g/L of HA-AgNPs showed a concentration-dependent reduction in seed germination. Conversely, lower concentrations of HA-AgNPs significantly increased germination rates, survival, tolerance indices, and seed water absorption compared to silver ions (Ag+). SEM/EDS indicated more significant potential for HA-AgNPs internalization compared to Ag+. Therefore, these findings are innovative and open new avenues for understanding the impact of Ag+ and HA-AgNPs on seed germination.

Thermal, viscoelastic, and electrical properties of thermoplastic polyurethane films reinforced with multi-walled carbon nanotubes.

Thermoplastic polyurethane (TPU) doped with multi-walled carbon nanotubes (MWCNTs) at 1, 3, 5, and 7 wt% has been studied. The effect of MWCNTs on thermal, viscoelastic, and electric properties in the TPU matrix was characterized by differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and by impedance spectroscopy. The results show that the thermal, electrical, and viscoelastic properties, such as the glass transition temperature, shifted towards high temperatures. The melting temperature decreased, and the conductivity and the storage modulus increased by 61.5 % and 58.3 %. The previously observed behavior on the films is due to the increase in the mass percentage of carbon nanotubes (CNTs) in the TPU matrix. Also, it can be said that the CNTs were homogeneously dispersed in the TPU matrix, preventing the movement of the polymer chains, and generating channels or connections that increase the conductivity and improve the thermal properties of the material.

Removal of phenazopyridine from water, synthetic urine, and real sample by adsorption using graphene oxide: A DFT theoretical/experimental approach.

Herein, graphene oxide was used as the highly efficient phenazopyridine adsorbent from aqueous medium, synthetic, and human urine. The nanoadsorbent was characterized by different instrumental techniques. The adsorption capacity (1253.17 mg g-1) was reached at pH 5.0, using an adsorbent dosage of 0.125 g L-1 at 298 K. The Sips and Langmuir described the equilibrium data well. At the same time, the pseudo-second order was more suitable for fitting the kinetic data. Thermodynamic parameters revealed the exothermic nature of adsorption with an increase in randomness at the solid-liquid interface. The magnitude of the enthalpy variation value indicates that the process involves the physisorption phenomenon. At the same time, ab initio molecular dynamics data corroborated with the thermodynamic results, indicating that adsorbent and adsorbate establish hydrogen bonds through the amine groups (adsorbate) and hydroxyl groups on the adsorbent surface (weak interactions). Electrostatic interactions are also involved. Additionally, the adsorption assays conducted in simulated medium and human urine showed the excellent performance of adsorbent material to remove the drug in real concentrations excreted by the kidneys (removal values higher than 60%).

Probabilistic material flow analysis of released nano titanium dioxide in Mexico.

Engineered Nanomaterials (ENMs) or products containing ENMs, known as nano-enabled products are commercialized globally by a large number of companies. Concern about the potential risks and negative impacts of releasing ENMs into the environment is under investigation. For this reason, methodologies to estimate the probable mass concentrations of ENMs released in different regions of the world have been developed. As a first attempt to estimate the probable mass flows of nanosized titanium dioxide (nano-TiO2) released in Mexico, we developed a Probabilistic Material Flow Analysis (PMFA) for 2015. The model describes probabilistic mass flows of released nano-TiO2 during the life cycle of sunscreens, coatings, ceramic, and other nano-enabled products, including the flows through the solid waste and wastewater management systems, as well as the transfer of nano-TiO2 to three environmental compartments (atmosphere, topsoil, and surface water). The PMFA incorporates the uncertainty related to the input data. We observed that the most significant nano-TiO2 flows occur to the surface water, landfill, and soil compartments, targeted as the main "hot-spots", where living organisms could be more exposed to this material. Further improvements in the model are needed due to some data gaps at some life cycle stages, for instance, solid waste management and reused wastewater manipulation for irrigation purposes. Finally, the model developed in this study can be adjusted to assess other ENM releases and can be beneficial for further investigation in fate modeling and environmental risk assessment.

Development of a scalable recombinant system for cyclic beta-1,2-glucans production.

BACKGROUND: Cyclic ß-1,2-glucans (CßG) are bacterial cyclic homopolysaccharides with interesting biotechnological applications. These ring-shaped molecules have a hydrophilic surface that confers high solubility and a hydrophobic cavity able to include poorly soluble molecules. Several studies demonstrate that CßG and many derivatives can be applied in drug solubilization and stabilization, enantiomer separation, catalysis, synthesis of nanomaterials and even as immunomodulators, suggesting these molecules have great potential for their industrial and commercial exploitation. Nowadays, there is no method to produce CßG by chemical synthesis and bacteria that synthesize them are slow-growing or even pathogenic, which makes the scaling up of the process difficult and expensive. Therefore, scalable production and purification methods are needed to afford the demand and expand the repertoire of applications of CßG. RESULTS: We present the production of CßG in specially designed E. coli strains by means of the deletion of intrinsic polysaccharide biosynthetic genes and the heterologous expression of enzymes involved in CßG synthesis, transport and succinilation. These strains produce different types of CßG: unsubstituted CßG, anionic CßG and CßG of high size. Unsubstituted CßG with a degree of polymerization of 17 to 24 glucoses were produced and secreted to the culture medium by one of the strains. Through high cell density culture (HCDC) of that strain we were able to produce 4,5 g of pure unsubstituted CßG /L in culture medium within 48 h culture. CONCLUSIONS: We have developed a new recombinant bacterial system for the synthesis of cyclic ß-1,2-glucans, expanding the use of bacteria as a platform for the production of new polysaccharides with biotechnological applications. This new approach allowed us to produce CßG in E. coli with high yields and the highest volumetric productivity reported to date. We expect this new highly scalable system facilitates CßG availability for further research and the widespread use of these promising molecules across many application fields.

Nanocomposites and their application in antimicrobial packaging.

The advances in nanocomposites incorporating bioactive substances have the potential to transform the food packaging sector. Different nanofillers have been incorporated into polymeric matrixes to develop nanocomposite materials with improved mechanical, thermal, optical and barrier properties. Nanoclays, nanosilica, carbon nanotubes, nanocellulose, and chitosan/chitin nanoparticles have been successfully included into polymeric films, resulting in packaging materials with advanced characteristics. Nanostructured antimicrobial films have promising applications as active packaging in the food industry. Nanocomposite films containing antimicrobial substances such as essential oils, bacteriocins, antimicrobial enzymes, or metallic nanoparticles have been developed. These active nanocomposites are useful packaging materials to enhance food safety. Nanocomposites are promising materials for use in food packaging applications as practical and safe substitutes to the traditional packaging plastics.

Ultradense Electrochemical Chips with Arrays of Nanostructured Microelectrodes to Enable Sensitive Diffusion-Limited Bioassays.

Nanostructured microelectrodes (NMEs) are an attractive alternative to yield sensitive bioassays in unprocessed samples. However, although valuable for different applications, nanoporous NMEs usually cannot boost the sensitivity of diffusion-limited analyses because of the enlarged Debye length within the nanopores, which reduces their accessibility. To circumvent this limitation, nanopore-free gold NMEs were electrodeposited from 45 µm SU-8 apertures, featuring nanoridged microspikes on a recessed surface of gold thin film while carrying interconnected crown-like and spiky structures along the edge of a SU-8 passivation layer. These structures were grown onto ultradense, vertical array chips that offer a promising strategy for translating reproducible, high-resolution, and cost-effective sensors into real-world applications. The NMEs yielded reproducible analyses, while machine learning allowed us to predict the analytical responses from NME electrodeposition data. By taking advantage of the high surface area and accessible structure of the NMEs, these structures provided a sensitivity for [Fe(CN)6]3-/4- that was 5.5× higher than that of bare WEs while also delivering a moderate antibiofouling property in undiluted human plasma. As a proof of concept, these electrodes were applied toward the fast (22 min) and simple determination of Staphylococcus aureus by monitoring the oxidation of [Fe(CN)6]4-, which acted as a cellular respiration rate redox reporter. The sensors also showed a wide dynamic range, spanning 5 orders of magnitude, and a calculated limit of detection of 0.2 CFU mL-1.

Electrochemical microfluidic immunosensor with graphene-decorated gold nanoporous for T-2 mycotoxin detection.

T-2 is one of the most potent cytotoxic food-borne mycotoxins. In this work, we have developed and characterized an electrochemical microfluidic immunosensor for T-2 toxin quantification in wheat germ samples. T-2 toxin detection was carried out using a competitive immunoassay method based on monoclonal anti-T-2 antibodies immobilized on the poly(methyl methacrylate) (PMMA) microfluidic central channel. The platinum wire working electrode at the end of the channel was in situ modified by a single-step electrodeposition procedure with reduced graphene oxide (rGO)-nanoporous gold (NPG). T-2 toxin in the sample was allowed to compete with T-2-horseradish peroxidase (HRP) conjugated for the specific recognizing sites of immobilized anti-T-2 monoclonal antibodies. The HRP, in the presence of hydrogen peroxide (H2O2), catalyzes the oxidation of 4-tert-butylcatechol (4-TBC), whose back electrochemical reduction was detected on the nanostructured electrode at -0.15 V. Thus, at low T-2 concentrations in the sample, more enzymatically conjugated T-2 will bind to the capture antibodies, and, therefore, a higher current is expected. The detection limits found for electrochemical immunosensor, and commercial ELISA procedure were 0.10 µg kg-1 and 10 µg kg-1, and the intra- and inter-assay coefficients of variation were below 5.35% and 6.87%, respectively. Finally, our microfluidic immunosensor to T-2 toxin will significantly contribute to faster, direct, and secure in situ analysis in agricultural samples.

Removing polyfluoroalkyl substances (PFAS) from wastewater with mixed matrix membranes.

Polyfluoroalkyl and perfluoroalkyl (PFAS) chemicals are fluorinated and exhibit complicated behavior. They are determined and highly resistant to ecological modifications that render plants ecologically robust. Thermal stability and water and oil resistance are examples of material qualities. Their adverse consequences are causing increasing worry due to their bioaccumulative nature in humans and other creatures. Direct data indicates that PFAS exposure in humans causes endocrine system disruption, immune system suppression, obesity, increased cholesterol, and cancer. Several PFASs are present in drinking water at low doses and may harm people. These cancer-causing PFAS have caused concern for water bodies all around the globe. Analytical techniques are used to identify and measure PFAS in an aqueous medium (membrane). Furthermore, a deeper explanation is provided for PFAS removal methods, including mixed matrix membrane (MMM) technology. By removing over 99 % of the PFAS from wastewater, MMMs may effectively remove PFAS from sewage when the support matrix contains adsorbing components. Furthermore, we consider several factors affecting the removal of PFAS and practical sorption methods for PFAS onto various adsorbents.

Antimicrobial evaluation of silver nanoparticles using extracts of Crescentia cujete L / Avaliação antimicrobiana de nanopartículas de prata usando extratos de Crescentia cujete L

New natural reducing agents with a lower negative impact on the environment and with a high antimicrobial potential are required for the process of obtaining silver nanoparticles through the chemical reduction method. The use of plant extracts can be a fast track in the formation of nanoparticles. In this case, organic compounds such as terpenes, flavonoids, enzymes, proteins, and cofactors present in plants act as reducing agents for nanomaterials. This research evaluated the antimicrobial property of silver nanoparticles from extracts of Crescentia cujete L. The presence of quercetin (flavonoid) was determined by high-performance liquid chromatography (HPLC); the production of silver nanoparticles (AgNPs) was established by green synthesis; the size and morphology of the nanomaterials were evaluated by scanning electron microscope (SEM). The antimicrobial capacity was studied by two analysis methods: modified culture medium and surface seeding. The presence of quercetin (26.55 mg L-1) in the crude extract of Crescentia cujete L., identified by HPLC, was evidenced. Nanoparticle formation was spherical, with an average size of 250 ± 3 and 460 ± 6 nm. Microbiological cultures with treatment showed 94% microbial inhibition. It was concluded that the Crescentia cujete L., leaves shoed an acceptable concentration of quercetin to be used as a useful adjuvant to enhance the reduction of NPs synthesis. The nanoparticles produced by green synthesis proved to have a positive effect to combat pathogenic microorganisms.

Novos agentes redutores naturais com menor impacto negativo ao meio ambiente e com alto potencial antimicrobiano são necessários para o processo de obtenção de nanopartículas de prata, pelo método de redução química. O uso de extratos vegetais pode ser um caminho rápido na formação de nanopartículas. Nesse caso, compostos orgânicos como terpenos, flavonoides, enzimas, proteínas e cofatores presentes nas plantas atuam como agentes redutores dos nanomateriais. Esta pesquisa avaliou a propriedade antimicrobiana de nanopartículas de prata de extratos de Crescentia cujete L. A presença de quercetina (flavonoide) foi determinada por cromatografia líquida de alta eficiência (HPLC); a produção de nanopartículas de prata (AgNPs) foi estabelecida por síntese verde; o tamanho e a morfologia dos nanomateriais foram avaliadas dos por microscópio eletrônico de varredura (SEM). A capacidade antimicrobiana foi estudada por dois métodos de análise: meio de cultura modificado e semeadura em superfície. Foi evidenciada a presença de quercetina (26,55 mg L-1) no extrato bruto de Crescentia cujete L., identificada por HPLC. A formação das nanopartículas foi esférica, com tamanho médio de 250 ± 3 e 460 ± 6 nm. Culturas microbiológicas com tratamento mostraram 94% de inibição microbiana. Assim, concluiu-se que as folhas de Crescentia cujete L. apresentam uma concentração aceitável de quercetina para ser utilizada como um adjuvante útil para potencializar a redução da síntese de NPs. As nanopartículas produzidas pela síntese verde provaram ter um efeito positivo no combate a microrganismos patogênicos.

Radiofrequency driving antitumor effect of graphene oxide-based nanocomposites: a Hill model analysis.

Aim: This report proposes using the Hill model to assess the benchmark dose, the 50% lethal dose, the cooperativity and the dissociation constant while analyzing cell viability data using nanomaterials to evaluate the antitumor potential while combined with radiofrequency therapy. Materials & methods: A nanocomposite was synthesized (graphene oxide-polyethyleneimine-gold) and the viability was evaluated using two tumor cell lines, namely LLC-WRC-256 and B16-F10. Results: Our findings demonstrated that while the nanocomposite is biocompatible against the LLC-WRC-256 and B16-F10 cancer cell lines in the absence of radiofrequency, the application of radiofrequency enhances the cell toxicity by orders of magnitude. Conclusion: This result points to prospective studies with the tested cell lines using tumor animal models.

Graphene oxide decreases the effects of salt stress on Persian clover seed germination.

Among biotic and abiotic stresses, the most restrictive for plant distribution is salt stress, where different concentrations might exert harmful effects on seed germination. Recently, nanomaterials were used successfully to mitigate these stresses, indicating that plants may be able to develop normally in adverse conditions. The aim of this study was to examine the effects of graphene oxide (GO) on the germination of Persian clover seedlings under salt stress conditions. Following sown on substrate paper, seeds were tested after exposure to different concentrations of graphene oxide (0, 125, 250, or 500 mg L-1 GO), sodium chloride (0; -0.1; -0.2; -0.3, or -0.4 MPa NaCl) and/or GO + salt concomitantly, and then stored for 7 days in a germination chamber at 20°C in the presence of light. Seed germination and growth parameters of seedlings were determined. Graphene oxide demonstrated protective effect against salt stress as evident by no marked adverse effects on seed germination where GO blocked the salt-induced reduction in germination. The results obtained provide references for the safe application of nanomaterials and emphasize the significance of GO as a promising material for reducing the toxicity of salts in agriculture.

A novel N95 respirator with chitosan nanoparticles: mechanical, antiviral, microbiological and cytotoxicity evaluations.

BACKGROUND: It is known that some sectors of hospitals have high bacteria and virus loads that can remain as aerosols in the air and represent a significant health threat for patients and mainly professionals that work in the place daily. Therefore, the need for a respirator able to improve the filtration barrier of N95 masks and even inactivating airborne virus and bacteria becomes apparent. Such a fact motivated the creation of a new N95 respirator which employs chitosan nanoparticles on its intermediate layer (SN95 + CNP). RESULTS: The average chitosan nanoparticle size obtained was 165.20 ± 35.00 nm, with a polydispersity index of 0.36 ± 0.03 and a zeta potential of 47.50 ± 1.70 mV. Mechanical tests demonstrate that the SN95 + CNP respirator is more resistant and meets the safety requisites of aerosol penetration, resistance to breath and flammability, presenting higher potential to filtrate microbial and viral particles when compared to conventional SN95 respirators. Furthermore, biological in vitro tests on bacteria, fungi and mammalian cell lines (HaCat, Vero E6 and CCL-81) corroborate the hypothesis that our SN95 + CNP respirator presents strong antimicrobial activity and is safe for human use. There was a reduction of 96.83% of the alphacoronavirus virus and 99% of H1N1 virus and MHV-3 betacoronavirus after 120 min of contact compared to the conventional respirator (SN95), demonstrating that SN95 + CNP have a relevant potential as personal protection equipment. CONCLUSIONS: Due to chitosan nanotechnology, our novel N95 respirator presents improved mechanical, antimicrobial and antiviral characteristics.

Morphological Electrical and Hardness Characterization of Carbon Nanotube-Reinforced Thermoplastic Polyurethane (TPU) Nanocomposite Plates.

The impacts on the morphological, electrical and hardness properties of thermoplastic polyurethane (TPU) plates using multi-walled carbon nanotubes (MWCNTs) as reinforcing fillers have been investigated, using MWCNT loadings between 1 and 7 wt%. Plates of the TPU/MWCNT nanocomposites were fabricated by compression molding from extruded pellets. An X-ray diffraction analysis showed that the incorporation of MWCNTs into the TPU polymer matrix increases the ordered range of the soft and hard segments. SEM images revealed that the fabrication route used here helped to obtain TPU/MWCNT nanocomposites with a uniform dispersion of the nanotubes inside the TPU matrix and promoted the creation of a conductive network that favors the electronic conduction of the composite. The potential of the impedance spectroscopy technique has been used to determine that the TPU/MWCNT plates exhibited two conduction mechanisms, percolation and tunneling conduction of electrons, and their conductivity values increase as the MWCNT loading increases. Finally, although the fabrication route induced a hardness reduction with respect to the pure TPU, the addition of MWCNT increased the Shore A hardness behavior of the TPU plates.

Solid-State Formation of a Potential Melphalan Delivery Nanosystem Based on ß-Cyclodextrin and Silver Nanoparticles.

Melphalan (Mel) is an antineoplastic widely used in cancer and other diseases. Its low solubility, rapid hydrolysis, and non-specificity limit its therapeutic performance. To overcome these disadvantages, Mel was included in ß-cyclodextrin (ßCD), which is a macromolecule that increases its aqueous solubility and stability, among other properties. Additionally, the ßCD-Mel complex has been used as a substrate to deposit silver nanoparticles (AgNPs) through magnetron sputtering, forming the ßCD-Mel-AgNPs crystalline system. Different techniques showed that the complex (stoichiometric ratio 1:1) has a loading capacity of 27%, an association constant of 625 M-1, and a degree of solubilization of 0.034. Added to this, Mel is partially included, exposing the NH2 and COOH groups that stabilize AgNPs in the solid state, with an average size of 15 ± 3 nm. Its dissolution results in a colloidal solution of AgNPs covered by multiple layers of the ßCD-Mel complex, with a hydrodynamic diameter of 116 nm, a PDI of 0.4, and a surface charge of 19 mV. The in vitro permeability assays show that the effective permeability of Mel increased using ßCD and AgNPs. This novel nanosystem based on ßCD and AgNPs is a promising candidate as a Mel nanocarrier for cancer therapy.

Synthesis of TiO2 graphene oxide-based material for textile effluent decontamination: characterization, kinetic, and mechanism studies.

In this work, a hydrothermal method was proposed to fabricate a nanomaterial composed of titanium dioxide and graphene oxide (10 wt%) (TiO2-GO). The GO was synthesized according to the modified Hummers and Offeman method, followed by exfoliation. Several characterization analyses were performed in order to investigate the structure, functional groups, and elemental composition of the nanomaterial. XRD analysis showed that the presence of GO does not change the crystalline structure of TiO2. FTIR evidenced the characteristic peaks present in both precursor materials (TiO2 and GO) and EDX confirmed the presence of GO on the TiO2-GO material. The nanomaterial was used as a photocatalyst in the TWW treatment, where the color and COD removal and the decrease of the characteristic peaks presented in the UV-Vis spectrum were investigated. The dosages of TiO2-GO and pH were studied to find the optimum operating condition. The results revealed that 0.5 g of photocatalyst with an initial pH of 3 achieve the best results under UV-A radiation. The kinetic test shows a COD removal of 87% after 90 min. The reuse test shows a decrease in COD removal after four cycles attributed to the deposition of some oxidized compounds on the catalyst surface. Finally, the efficiency of the photocatalyst was evaluated under solar radiation and it was shown that despite the good results, the performance of the TiO2-GO was better under UV-A radiation.

Development of inclusion complexes of 2-hydroxypropyl-ß-cyclodextrin with Psidium guajava L. essential oil by freeze-drying and kneading methods for application as Aedes aegypti L. larvicide.

Inclusion complexes (ICs) of 2-hydroxypropyl-ß-cyclodextrin with the essential oil (EO) from Seculo XXI cultivar of Psidium guajava were prepared using kneading (KN) and freeze-drying (FD) methods. The resulting ICs clusters have a nanometric size, with a diameter of approximately 80 and 40 nm for KN and FD, respectively. Complexation efficiency was 80.3% and 50.8% for KN and FD methods, respectively. The larvicidal activity of the EO in DMSO on A. aegypti had LC50 and LC90 values of 51.49 and 64.51 µg mL-1, respectively. For the KN method, the toxicity corresponded to 77.54 and 107.29 µg mL-1 for LC50 and LC90, respectively. FD method demonstrated toxicity at concentrations above 600 µg mL-1. Thus, ICs enable the use of EO in breeding sites for A. aegypti, thus being potential products to be commercially exploited.