Analysis of differences in physicochemical properties of different sorghum varieties and their influence on the selection of raw materials for winemaking.

Sorghum is one of the oldest crops in the world, an important grain crop in northern China, and a major raw material in the liquor-brewing industry. The physicochemical properties, cooking characteristics, and starch quality of sorghum seeds considerably affect the liquor-brewing process.To select suitable sorghums for liquor brewing and to determine the cooking characteristics and starch physicochemical properties of different sorghum varieties, 30 types of sorghum were used in this study, and their compositions were compared; six types of sorghum were further studied for their cooking quality and starch physicochemical and pasting characteristics. Gas chromatography time of flight mass spectrometry was used to analyse the cooking aroma of sorghum seeds. Additionally, scanning electron microscopy, a rapid visco analyser, and a differential calorimetric scanner were used to analyse the microstructure of sorghum starch, starch pasting characteristics, and thermodynamic properties, respectively. The results revealed that the water absorption and saccharification forces of glutinous sorghum were higher than those of japonica sorghum and that the aroma substances were significantly different. Glutinous sorghum starch had high crystallinity, freeze-thaw stability, and enthalpy, thus indicating its structural stability. This study provides a theoretical basis for the selection of wine raw materials in the future.

Three nonconventional starch: Comparison of physicochemical properties and in vitro digestibility.

Extraction of starch from waste is also an effective way to recover resources and provide new sources of starch. In this study, starch was isolated from white kidney bean residue, chickpea residue, and tiger nut meal after protein or oil extraction, and the morphology of starch particles was observed to determine their physicochemical properties and in vitro digestibility. All these isolated starches had unique properties, among which white kidney bean starch (KBS) had a high amylose content (43.48%), and its structure was better ordered. Scanning electron microscopy revealed distinct granular morphologies for the three starches. KBS and chickpea starch (CHS) were medium-granular starches, whereas tiger nut starch was a small granular starch. Fourier transform infrared spectroscopy analysis confirmed the absence of significant differences in functional groups and chemical bonds among the three starch molecules. In vitro digestibility studies showed that CHS is more resistant to enzymatic degradation. Overall, these results will facilitate the development of products based on the separation of nonconventional starches from waste.

Soil organic matter and water content affect the community characteristics of arbuscular mycorrhizal fungi in Helan mountain, an arid desert grassland area in China.

Introduction: Arbuscular mycorrhizal fungi (AMF) are vital in terrestrial ecosystems. However, the community structure characteristics and influencing factors of AMF in the forest ecosystems of arid desert grassland areas require further investigation. Methods: Therefore, we employed high-throughput sequencing technology to analyze the soil AMF community characteristics at different elevations in the Helan mountains. Results: The results revealed that significant differences (P < 0.05) were observed in the soil physicochemical properties among different elevations, and these properties exhibited distinct trends with increasing elevation. Through high-throughput sequencing, we identified 986 operational taxonomic units (OTUs) belonging to 1 phylum, 4 classes, 6 orders, 12 families, 14 genera, and 114 species. The dominant genus was Glomus. Furthermore, significant differences (P < 0.05) were observed in the α-diversity of the soil AMF community across different elevations. Person correlation analysis, redundancy analysis (RDA), and Monte Carlo tests demonstrated significant correlations between the diversity and abundance of AMF communities with soil organic matter (OM) (P < 0.01) and soil water content (WC) (P < 0.05). Discussion: This study provides insights into the structural characteristics of soil AMF communities at various altitudes on the eastern slope of Helan mountain and their relationships with soil physicochemical properties. The findings contribute to our understanding of the distribution pattern of soil AMF and its associations with environmental factors in the Helan mountains, as well as the stability of forest ecosystems in arid desert grassland areas.

Effect of butylated hydroxytoluene (BHT) concentrations on polymerization shrinkage stress and other physicochemical properties of experimental resin composites.

The present study examined different concentrations of the butylated hydroxytoluene (BHT) inhibitor on the kinetics of conversion, polymerization shrinkage stress, and other correlated physicochemical properties of experimental resin composites (ERC). A model composite was formulated with 75 wt% filler containing 0.5 wt% camphorquinone and 1 wt% amine with BHT concentrations of 0.01 wt% (BHT-0.01); 0.1 wt% (BHT-0.1); 0.25 wt% (BHT-0.25); 0.5 wt% (BHT-0.5); 1 wt% (BHT-1), and control (no BHT). They were tested on polymerization shrinkage stress (PSS; n = 5), degree of conversion (DC; n = 3), maximum polymerization rate (RpMAX; n = 5), water sorption (Wsp; n = 0), and solubility (Wsl; n = 10), flexural strength (FS; n = 10), flexural modulus (FM; n = 10), Knoop microhardness (KH; n = 10), and microhardness reduction (HR; n = 10). Data concerning these tests were submitted to one-way ANOVA and Tukey's test (α = 0.05; ß = 0.2). BHT-0.25, BHT-0.5, and BHT-1 showed a gradually significant decrease in PSS (p = 0.037); however, BHT-1 demonstrated a decrease in the physicochemical properties tested. Thus, within the limitations of this study, it was possible to conclude that BHT concentrations between 0.25 and 0.5 wt% are optimal for reducing shrinkage stress without affecting other physicochemical properties of ERCs.

Metabolomics analysis of physicochemical properties associated with quality deterioration in insect-infested hawthorn berries.

The sliced and dried hawthorn berries are easily infested by insects during storage. This study aimed to determine the effect of insect infestation on the quality of hawthorn berries and assess the change at metabolite level by analyzing physicochemical property and metabolomics profiling. A total of 184 shared differential metabolites were obtained, mainly including flavonoids, fatty acids, carboxylic acids and derivatives, and nitrogenous compounds. Through receiver operating characteristic curve assessment, 9 significant differential markers were screened out to distinguish insect infestation of hawthorn berries. Correlation analysis showed that the color, total organic acids, total phenolics, and total flavonoids were effective indicators for quality evaluation of insect infestation, and uric acid and hippuric acid can serve as biomarkers for the quality deterioration of hawthorn berries during storage. This study demonstrated that insect infestation could decrease the quality of hawthorn berries from macro and micro perspectives.

Combined effects of nitrogen and sulfur fertilizers on chemical composition, structure and physicochemical properties of buckwheat starch.

Buckwheat starch has attracted worldwide attention in the food industry as a valuable raw material or food additive. Nitrogen (N) and sulfur (S) are two nutrients essential to ensure grain quality. This study investigated the combined application of N fertilizer (0, 45 and 90 kg N ha-1) and S fertilizer (0 and 45 kg SO3 ha-1) on the chemical composition, structure and physicochemical properties of buckwheat starch. The results showed that increasing the fertilizer application decreased amylose content and starch granule size but increased light transmittance, water solubility and swelling power. The stability of the absorption peak positions and the decrease in short-range order degree suggested that fertilization influenced the molecular structure of buckwheat starch. In addition, increases in viscosity and gelatinization enthalpy as well as decreases in gelatinization temperatures and dynamic rheological properties indicated changes in the processing characteristics and product quality of buckwheat-based foods.

Analysis of physicochemical properties of nut-based milk and sweetened condensed milk alternatives.

This study analyzed the physicochemical properties of nut-based milk and sweetened condensed milk (SCM) alternatives. Four types of nuts (almonds, cashews, hazelnuts, and walnuts) were roasted at 140 °C for 15 min, followed by the preparation and analysis of milk and SCM alternatives. During the production of SCM by heating with adding sugar, the pH, moisture, and L* decreased, while the carbohydrates, viscosity, and browning index increased significantly (p < 0.05). Oleic acid, linoleic acid, and linolenic acid contents were comparable among all samples (p > 0.05). Volatile compounds were analyzed using HS-SPME-GC-MS to determine changes due to roasting and heating, and a total of 54 volatile compounds were identified. These findings to show the importance of the physicochemical characteristics of milk and SCM alternatives, provide practical information for the development of improved-quality dairy alternatives.

Physicochemical and functional characteristics of a gourd (Cucurbita argyrosperma Huber) seed protein isolate subjected to high-intensity ultrasound.

The impact of high-intensity ultrasound (HIU, 20 kHz) on the physicochemical and functional characteristics of gourd seed protein isolate (GoSPI) was studied. GoSPI was prepared from oil-free gourd seed flour through alkaline extraction (pH 11) and subsequent isoelectric precipitation (pH 4). The crude protein concentration of GoSPI ranged from 91.56 ± 0.17 % to 95.43 ± 0.18 %. Aqueous suspensions of GoSPI (1:3.5 w/v) were ultrasonicated at powers of 200, 400, and 600 W for 15 and 30 min. Glutelins (76.18 ± 0.15 %) were the major protein fraction in GoSPI. HIU decreased the moisture, ash, ether extract, and nitrogen-free extract contents and the hue angle, available water and a* and b* color parameters of the GoSPI in some treatments. The L* color parameter increased (7.70 %) after ultrasonication. HIU reduced the bulk density (52.63 %) and particle diameter (39.45 %), as confirmed by scanning electron microscopy, indicating that ultrasonication dissociated macromolecular aggregates in GoSPI. These structural changes enhanced the oil retention capacity and foam stability by up to 62.60 and 6.84 %, respectively, while the increases in the solvability, water retention capacity, and emulsifying activity index of GoSPI were 90.10, 19.80, and 43.34 %, respectively. The gelation, foaming capacity, and stability index of the emulsion showed no improvement due to HIU. HIU altered the secondary structure of GoSPI by decreasing the content of α-helices (49.66 %) and increasing the content of ß-sheets (52.00 %) and ß-turns (65.00 %). The electrophoretic profile of the GoSPI was not changed by HIU. The ultrasonicated GoSPI had greater functional attributes than those of the control GoSPI and could therefore be used as a functional food component.

Comprehensive analysis of spatial heterogeneity reveals the important role of the upper-layer fermented grains in the fermentation and flavor formation of Qingxiangxing baijiu.

Different spatial positions lead to inconsistent fermentation effects and flavors, however, the spatial heterogeneity of Qingxiangxing (QXX) Baijiu remains unknown. We investigated the microbes, flavors, and physicochemical properties of different layers in fermented grains of QXX Baijiu using Illumina HiSeq sequencing, two-dimensional gas chromatography-mass spectrometry (GC × GC-MS) and ultra-high performance liquid chromatography-mass (UHPLC-MS). A total of 79 volatiles, 1596 metabolites, 50 bacterial genera, and 52 fungal genera were identified. The contents distribution followed the order: upper layer > bottom layer > middle layer. Organic acids and derivatives were the main differential metabolites across the three layers. Starch, pH, and reducing sugar levels increased from the upper to bottom layer. Saccharomyces and Lactobacillus were dominant microbes. Pediococcus, the biomarker of upper layer, showed positive correlations with formic acid, ethyl lactate, acetic acid, ethyl linoleate, and ethyl oleate. These findings deepen our understanding of the fermentation and flavor formation mechanisms of QXX Baijiu.

Structural, physicochemical and digestive properties of non-covalent and covalent complexes of ultrasound treated soybean protein isolate with soybean isoflavone.

The non-covalent and covalent complexes of ultrasound treated soybean protein isolate (SPI) and soybean isoflavone (SI) were prepared, and the structure, physicochemical properties and in vitro digestion characteristics of SPI-SI complexes were investigated. Ultrasonic treatment increased the non-covalent and covalent binding degree of SPI with SI, and the 240 W ultrasonic covalent complexes had higher binding efficiency. Appropriate ultrasonic treatment caused more uniform particle size distribution, lower average particle size and higher surface charge, which enhanced the free sulfhydryl groups and surface hydrophobicity, thus improving the stability, solubility and emulsifying properties of complexes. Ultrasonic treatment resulted in more disordered secondary structure, tighter tertiary conformation, higher thermal stability and stronger SPI-SI covalent interactions of complexes. These structural modifications of particles had important effects on the chemical stability and gastrointestinal digestion fate of SI. The ultrasonic covalent complexation had a greater resistance to heat-induced chemical degradation of SI and improved its chemical stability. Furthermore, the 240 W ultrasonic covalent complexes showed lower protein digestibility during digestion, and provided stronger protection for SI, which improved the digestion stability and antioxidant activity. Therefore, appropriate ultrasound promoted SPI-SI interactions to improve the stability and functional properties of complexes, which provided a theoretical basis for the development of new complexes and their applications in functional foods.

Analyzing the quality differences between healthy and moldy cigar tobacco leaves during the air-curing process through fungal communities and physicochemical components.

Introduction: The air-curing process of cigar tobacco, as a key step in enhancing the quality of cigars, is often susceptible to contamination by mold spores, which severely constrains the quality of cigar tobacco. Methods: This study employed high-throughput Illumina sequencing technology and a continuous flow analysis system to analyze the differences between the microbial communities and physicochemical components of moldy and healthy cigar tobacco leaves. Furthermore, correlation analysis was performed to reveal the impact of mold on the quality of cigar tobacco. Results: The differences between the microbial flora and physicochemical compositions of moldy (MC) and healthy (HC) tobacco leaves were analyzed, revealing significant disparities between the two groups. Aspergillus spp. represented the dominant mold in MC, with nine out of twelve isolated molds showing higher quantities on MC than on HC. Mold contamination notably decreased the total nitrogen (TN), total phosphorus (TP), total alkaloids (TA), starch, protein, and flavor constituents while increasing the total fatty acid esters (TFAA), which was accompanied by a shift towards weakly acidic pH in the leaves. Fungal community analysis indicated a significant reduction in the fungal operational taxonomic unit (OUT) numbers and diversity indices in MC, contrasting with the bacterial trends. Aspergillus exhibited significantly higher relative abundance in MC, with LEfSe analysis pinpointing it as the primary driver of differentiation. Furthermore, significant negative correlations were observed between Aspergillus and TP, starch, TA, and protein, while a significant positive association was evident with TFAA. Network analysis underscored the pivotal role of Aspergillus as the species influencing disparities between HC and MC, with its abundance serving as a critical determinant during the air-curing process. Discussion: This study elucidated substantial quality distinctions between MC and HC during air-curing, with Aspergillus emerging as the key species contributing to leaf mold.

Antioxidant Activity, Physicochemical and Sensory Properties of Stingless Bee Honey from Australia.

This study reports on the physicochemical and sensory attributes, total phenolic content, and antioxidant activity of 36 honey samples produced by two different stingless bee species (Tetragonula carbonaria and Tetragonula hockingsi) from Australia. The findings reveal moisture content across all samples ranges from 24.9% to 30.8% (w/w), electrical conductivity from 1.02 to 2.15 mS/cm, pH levels between 3.57 and 6.54, soluble solids from 69.2 to 75.1 °Brix, trehalulose concentrations from 6.20 to 38.2 g/100 g, fructose levels from 7.79 to 33.4 g/100 g, and glucose content from 3.36 to 26.8 g/100 g. Sucrose was undetectable in all investigated samples. In a sensory analysis involving 30 participants, Australian stingless bee honey was perceived as having a more pronounced sourness compared with New Zealand Manuka honey. The study reveals considerable variability in the composition of Australian stingless bee honey, influenced by factors such as floral availability, geographical origin, and time of harvest. It also demonstrates the presence of phenolic compounds and antioxidant activity in stingless bee honey, underlining their potential as a natural source of antioxidants. All investigated samples contain trehalulose, which supports the findings of other recent studies that propose this unusual disaccharide as a marker compound of stingless bee honey.

Effect of Blueberry Pomace Addition on Quality Attributes of Buttermilk-Based Fermented Drinks during Cold Storage.

The fruit and beverage industry faces challenges related to waste management and environmental pollution due to rapid industrial expansion. Fruit industry waste, such as blueberry pomace, holds the promise of enhancing gut health and providing valuable antioxidants. Concurrently, buttermilk, a prominent dairy product, offers nutritional and technological benefits but remains underutilized. This study aimed to evaluate the incorporation of blueberry pomace (0%, 2%, 4%, 6%, 8%, and 10%) into buttermilk at varying levels and assess its impact on the physicochemical, antioxidant, microbiological, and sensory characteristics of the buttermilk. Buttermilk samples were supplemented with different concentrations of blueberry pomace and subjected to analysis over a two-week storage period (4 ± 1 °C). The addition of blueberry pomace led to alterations in the pH, dry matter, water holding capacity, color parameters, total phenolic content, and antioxidant activity. Microbiological analysis revealed the absence of Enterobacteriaceae, yeast, or molds. Sensory evaluation indicated significant differences among samples, with the highest scores observed for the buttermilk supplemented with 2% and 4% blueberry pomace. Incorporating blueberry pomace improved the overall acceptability and sensory properties. This research highlights the potential of fruit industry by-products to enhance the functionality and health benefits of dairy products, which is a promising way to effectively utilize waste.

Starch nanoparticles with predictable size prepared by alternate treatments of ball milling and ultrasonication.

In this study, starch nanoparticles (SNPs) were prepared by alternate treatments of liquid nitrogen ball milling and ultrasonication. The impact, shear and friction forces produced by ball milling, and acoustic cavitation and shear effects generated by ultrasonication disrupted starch granules to prepare SNPs. The SNPs possessed narrow particle size distribution (46.91-210.52 nm) and low polydispersity index (0.28-0.45). Additionally, the SNPs exhibited the irregular fragments with good uniformity. The relative crystallinity decreased from 34.91 % (waxy corn starch, WCS) to 0-25.91 % (SNPs), and the absorbance ratios of R1047/1022 decreased from 0.81 (WCS) to 0.60-0.76 (SNPs). The SNPs had lower thermal stability than that of WCS, characterized by a decrease in Td (temperature at maximum weight loss) from 309.39 °C (WCS) to 300.39-305.75 °C (SNPs). Furthermore, the SNPs exhibited excellent swelling power (3.48-28.02 %) and solubility (0.34-0.97 g/g). Notably, oil absorption capacity of the SNPs (9.77-15.67 g/g) was rather greater than that of WCS (1.33 g/g). Furthermore, the SNPs possessed the lower storage modulus (G'), loss modulus (G″) and viscosity than that of WCS. The SNPs with predictable size and high dispersion capability prepared in this study lay a foundation for expanding the application of SNPs.

Release profile of amino acids encapsulated in solid lipid particles during in vitro oro-gastrointestinal digestion.

Some amino acids are known to mediate immune responses through gut microbiota metabolism in both humans and monogastric animals. However, through the diet, most free amino acids are absorbed in the small intestine and only a small quantity reaches the microbiota-rich colon. To enhance microbial metabolism of amino acids and their potential health benefits, encapsulation strategies are developed for their protection and delivery to the colon. So far, the main encapsulation systems for amino acids are based on solid lipid particles, but their fate within the digestive tract has never been fully clarified. In this study, we investigated the release of various amino acids (branched-chain amino acid mixture, or lysine, or tryptophan) loaded in solid lipid particles during in vitro oro-gastrointestinal digestion mimicking the piglet. The loaded solid lipid particles were fully characterized for their composition, thermal behavior, molecular structure, crystalline state, surface morphology, and particle size distribution. Moreover, we investigated the effect of particle size by sieving solid lipid particles into two non-overlapping size fractions. We found that amino acid release was high during the gastric phase of digestion, mainly controlled by physical parameters, namely particle size and crystalline state including surface morphology. Large particle size and/or smooth ordered particle indeed led to slower and lower release. Although lipid hydrolysis was significant during the intestinal phase of digestion, the impact of the crystalline state and surface morphology was also observed in the absence of enzymes, pointing to a dominant water/solute diffusion mechanism through these porous solid lipid particles.

Quality analysis of dough and steamed bread under various freezing conditions.

Freezing is a crucial step in the process of frozen foods. In this study, the effects of different freezing methods, including liquid nitrogen immersion freezing (LF), quick-freezing machine freezing (QF), packaging immersion freezing (PF), and ultralow temperature refrigerator freezing (UF), and freezing time (0, 15, 30, and 60 days) on the textural properties, dynamic rheological properties, water distribution, and structure of dough and the quality of end steamed bread were evaluated. Freezing resulted in a decline in the physicochemical properties of dough. UF- and QF-doughs had higher storage modulus and loss modulus, compared with PF- and LF-doughs. LF enhanced the textural attributes of the dough, resulting in reduced hardness and increased springiness. At 15 days of freezing, QF- and LF-doughs exhibited a compact and continuous structure with a smooth surface. Additionally, the correlation analysis elucidated that the weight loss rate and the bound water content of the dough had discernible impacts on the texture of both the dough and the resulting steamed bread. Overall, LF demonstrated a relatively high freezing efficiency and effectively maintained the quality of the dough for up to 15 days of freezing. These results offer valuable insights for the applications of freezing methods and time in frozen foods.

CNS delivery of targeted protein degraders.

Heterobifunctional small molecule degraders are a subset of targeted protein degraders (TPDs), consisting of two ligands joined by a linker to induce proteasomal degradation of a target protein. As compared to traditional small molecules these compounds generally demonstrate inflated physicochemical properties, which may require innovative formulation strategies to enable their delivery and exert pharmacodynamic effect. The blood brain barrier (BBB) serves an essential function in human physiology, but its presence requires advanced approaches for treating central nervous system (CNS) diseases. By integrating emerging modalities like TPDs with conventional concepts of drug delivery, novel strategies to overcome the BBB can be developed. Amongst the available routes, lipid and polymer-based long-acting delivery seems to be the most amenable to TPDs, due to their ability to encapsulate lipophilic cargo and potential to be functionalized for targeted delivery. Another key consideration will be understanding E3 ligase expression in the different regions of the brain. Discovery of new brain or CNS disease specific E3 ligases could help overcome some of the barriers currently associated with CNS delivery of TPDs. This review discusses the current strategies that exist to overcome and improve therapeutic delivery of TPDs to the CNS.

Comparative Analysis of Structural and Functional Properties of Dietary Fiber from Four Grape Varieties.

Muscadine grapes are characterized by their large and abundant seeds and hard and thick skins that contain significant amounts of dietary fiber (DF). The current study investigated the chemical constituents, molecular architecture, and physicochemical attributes of DF derived from Muscadine grapes (Granny Val and Alachua) and compared them with those derived from Shine Muscat and Kyoho. Using a combined enzymatic method, the total dietary fiber (TDF) was extracted and divided into two parts: soluble dietary fiber (SDF) and insoluble dietary fiber (IDF). TDF (mainly IDF, with a small fraction of SDF) was dominated by cellulose, followed by pectin and hemicellulose. In addition, Granny Val and Alachua had a significantly higher abundance of TDF and IDF compared with Shine Muscat and Kyoho. Moreover, Shine Muscat had significantly the highest abundance of SDF among the four grape varieties. Of note, IDF from Granny Val and Alachua exhibited a complex and dense texture on its surface, and notably outperformed Shine Muscat and Kyoho in terms of cholesterol, fatty acid, heavy metal adsorption, and antioxidant activity. Collectively, Muscadine grapes, i.e., Granny Val and Alachua in the current study, possessed elevated DF levels (predominantly IDF), and their enhanced bioactivity underscored their potential as a potential food ingredient for further use.

Does the mixing method of AH Plus Jet affect its physicochemical and mechanical properties?

INTRODUCTION: The purpose of this study was to evaluate whether the mixing method of AH Plus Jet sealer affects its physicochemical and mechanical properties. METHODS: The properties of AH Plus Jet sealer were analyzed when mixed using either the Auto Mix Tip or manual mixing. The evaluated properties included radiopacity (n=5), initial and final setting times (n=5), flow (n=5), and solubility (n=3), following specifications outlined in ISO 6876/2012 and ADA Nº 57/2000. pH levels were measured at intervals of 3, 24, 72, and 168 hours (n=10). The push-out bond strength test was conducted using a universal testing machine and using bovine teeth (n=30). Failure modes were analyzed with stereomicroscopy. Porosity was evaluated under micro-CT (n=5) and scanning electron microscopy was also performed (n=5). One-way analysis of variance and Tukey, unpaired t-tests, or Mann-Whitney tests were used with a significance level of 5%. RESULTS: The Auto Mix exhibited a radiopacity value of 12.11 mmAl, whereas manual mixing resulted in 12.55 mmAl (P>0.05). For initial and final setting times, Auto Mix showed 901 minutes and 1779 minutes, respectively, while manual mixing recorded values of 631 minutes and 1504 minutes (P<0.05). In terms of flow, Auto Mix demonstrated higher values (25.26 mm) than manual mixing (21.71 mm) (P<0.05). No statistical differences were observed between the two methods for solubility and pH (P>0.05). Manual mixing presented a higher bond strength value (14.52 MPa) than Auto Mix (9.81 MPa) (P<0.05). The mixed failure mode was the most frequent outcome for both methods. The highest porosity was observed for Auto Mix (P<0.05). Scanning electron microscopy analysis revealed that manual mixing resulted in a smoother surface with fewer pores and smaller, more evenly distributed agglomerates compared to automatic mixing. CONCLUSION: The mixing method employed for AH Plus Jet sealer influences some physicochemical and mechanical properties of the material.

Sophoraflavanone G: A review of the phytochemistry and pharmacology.

Bioactive compounds derived from natural sources have long been investigated for the prevention and treatment of human diseases. Sophoraflavanone G (SFG), a lavandulyl flavanone naturally occurring in several Sophora plant species, belongs to the group of prenylated flavonoids that have garnered significant interest in contemporary research. The natural molecule exhibits a wide range of pharmacological properties and shows remarkable efficacy. Its ability to effectively suppress a range of malignant tumor cells, such as leukemia, breast cancer, and lung cancer, is attributed to its multi-target, multi-pathway, and multi-faceted mechanisms of action. Simultaneously, it can also alleviate various inflammatory diseases by mediating inflammatory mediators and molecular pathways. Furthermore, it has the capability to combat antibiotic resistance, exhibit synergistic antibacterial properties with diverse antibiotics, and prevent and treat various agricultural pests. Theoretically, it can bring benefits to human health and has potential value as a drug. Nevertheless, the drawbacks of poor water solubility and inadequate targeting cannot be overlooked. To comprehensively assess the current research on SFG, leverage its structural advantages and pharmacological activity, overcome its low bioavailability limitations, expedite its progression into a novel therapeutic drug, and better serve the clinic, this article presents a overall retrospect of the current research status of SFG. The discussion includes an analysis of the structural characteristics, physicochemical properties, bioavailability, pharmacological activities, and structure-activity relationships of SFG, with the goal of offering valuable insights and guidance for future research endeavors in this field.