The growth rate of senile plaques is determined by the competition between the rate of deposition of free Aß aggregates into plaques and the autocatalytic production of free Aß aggregates.

The formation of amyloid beta (Aß) deposits (senile plaques) is one of the hallmarks of Alzheimer's disease (AD). This study investigates what processes are primarily responsible for their formation. A model is developed to simulate the diffusion of amyloid beta (Aß) monomers, the production of free Aß aggregates through nucleation and autocatalytic processes, and the deposition of these aggregates into senile plaques. The model suggests that efficient degradation of Aß monomers alone may suffice to prevent the growth of senile plaques, even without degrading Aß aggregates and existing plaques. This is because the degradation of Aß monomers interrupts the supply of reactants needed for plaque formation. The impact of Aß monomer diffusivity is demonstrated to be small, enabling the application of the lumped capacitance approximation and the derivation of approximate analytical solutions for limiting cases with both small and large rates of Aß aggregate deposition into plaques. It is found that the rate of plaque growth is governed by two competing processes. One is the deposition rate of free Aß aggregates into senile plaques. If this rate is small, the plaque grows slowly. However, if the rate of deposition of Aß aggregates into senile plaques is very large, the free Aß aggregates are removed from the intracellular fluid by deposition into the plaques, leaving insufficient free Aß aggregates to catalyze the production of new aggregates. This suggests that under certain conditions, Aß plaques may offer neuroprotection and impede their own growth. Additionally, it indicates that there exists an optimal rate of deposition of free Aß aggregates into the plaques, at which the plaques attain their maximum size.

Enhanced UV Penetration and Cross-Linking of Isoporous Block Copolymer and Commercial Ultrafiltration Membranes using Isorefractive Solvent.

Amphiphilic block copolymers are promising candidates for the fabrication of ultrafiltration membranes with an isoporous integral asymmetric structure. The membranes are typically fabricated by the combination of block copolymer self-assembly and the non-solvent-induced phase separation (SNIPS) process resulting in isoporous integral asymmetric membranes. Certainly, all these membranes lack thermal and chemical stability limiting the usage of such materials. Within this study, the fabrication of completely cross-linked isoporous integral asymmetric block copolymer membranes is demonstrated by UV cross-linking resulting in chemical and thermal stable ultrafiltration membranes. The UV cross-linking process of PVBCB-b-P4VP (poly(4-vinylbenzocyclobutene)-b-poly(4vinylpyridine)) block copolymer membranes in dependency of irradiation time, intensity, distance between membrane and UV source and the wavelength is investigated. Furthermore, it is shown that the penetration depths can be increased by soaking the membranes in wave-guiding solutions before UV cross-linking is carried out. Moreover, a completely new and easy cross-linking strategy is developed based on isorefractive solvents resulting in thermal and chemically stable membranes that are cross-linked through the whole membrane thickness. Finally, the new cross-linking strategy in isorefractive solutions is transferred to commercial PVDF and PAN-co-PVC polymer membranes paving the way for more stable and sustainable ultrafiltration membranes.

Volumetric Additive Manufacturing of Dicyclopentadiene by Solid-State Photopolymerization.

Polymerization in the solid state is generally infeasible due to restrictions on mobility. However, in this work, the solid-state photopolymerization of crystalline dicyclopentadiene is demonstrated via photoinitiated ring-opening metathesis polymerization. The source of mobility in the solid state is attributed to the plastic crystal nature of dicyclopentadiene, which yields local short-range mobility due to orientational degrees of freedom. Polymerization in the solid state enables photopatterning, volumetric additive manufacturing of free-standing structures, and fabrication with embedded components. Solid-state photopolymerization of dicyclopentadiene offers a new paradigm for advanced and freeform fabrication of high-performance thermosets.

Aluminum Alkyl Induced Isomerization of Group IV meso Metallocene Complexes.

The synthesis of group IV metallocene precatalysts for the polymerization of propylene generally yields two different isomers: The racemic isomer that produces isotactic polypropylene (iPP) and the meso isomer that produces atactic polypropylene (aPP). Due to its poor physical properties, aPP has very limited applications. To avoid obtaining blends of both polymers and thus diminish the mechanical and thermal properties of iPP, the meso metallocene complexes need to be separated from the racemic ones tediously -rendering the metallocene-based polymerization of propylene industrially far less attractive than the Ziegler/Natta process. To overcome this issue, we established an isomerization protocol to convert meso metallocene complexes into their racemic counterparts. This protocol increased the yield of iPP by 400% while maintaining the polymer's excellent physical properties and was applicable to both hafnocene and zirconocene complexes, as well as different precatalyst activation methods. Through targeted variation of the ligand frameworks, methoxy groups at the indenyl moieties were found to be the structural motifs responsible for an isomerization to take place -this experimental evidence was confirmed by density functional theory calculations. Liquid injection field desorption ionization mass spectrometry, as well as 1H and 29Si nuclear magnetic resonance studies, allowed the proposal of an isomerization mechanism.

Micropattern Fabricated by Acropetal Migration Controlled through Sequential Photo and Thermal Polymerization.

Bottom-up patterning technology plays a significant role in both nature and synthetic materials, owing to its inherent advantages such as ease of implementation, spontaneity, and noncontact attributes, etc. However, constrained by the uncontrollability of molecular movement, energy interaction, and stress, obtained micropatterns tend to exhibit an inevitable arched outline, resulting in the limitation of applicability. Herein, inspired by auxin's action mode in apical dominance, a versatile strategy is proposed for fabricating precision self-organizing micropatterns with impressive height based on polymerization-induced acropetal migration. The copolymer containing fluorocarbon chains (low surface energy) and tertiary amine (coinitiator) is designed to self-assemble on the surface of the photo-curing system. The selective exposure under a photomask establishes a photocuring boundary and the radicals would be generated on the surface, which is pivotal in generating a vertical concentration difference of monomer. Subsequent heating treatment activates the material continuously transfers from the unexposed area to the exposed area and is accompanied by the obviously vertical upward mass transfer, resulting in the manufacture of a rectilinear profile micropattern. This strategy significantly broadens the applicability of self-organizing patterns, offering the potential to mitigate the complexity and time-consuming limitations associated with top-down methods.

Dual-reactive single-chain polymer nanoparticles for orthogonal functionalization through active ester and click chemistry.

Glucose has been extensively studied as a targeting ligand on nanoparticles for biomedical nanoparticles. A promising nanocarrier platform are single-chain polymer nanoparticles (SCNPs). SCNPs are well-defined 5-20 nm semi-flexible nano-objects, formed by intramolecularly crosslinked linear polymers. Functionality can be incorporated by introducing labile pentafluorophenyl (PFP) esters in the polymer backbone, which can be readily substituted by functional amine-ligands. However, not all ligands are compatible with PFP-chemistry, requiring different ligation strategies for increasing versatility of surface functionalization. Here, we combine active PFP-ester chemistry with copper(I)-catalyzed azide alkyne cycloaddition (CuAAC) click chemistry to yield dual-reactive SCNPs. First, the SCNPs are functionalized with increasing amounts of 1-amino-3-butyne groups through PFP-chemistry, leading to a range of butyne-SCNPs with increasing terminal alkyne-density. Subsequently, 3-azido-propylglucose is conjugated through the glucose C1- or C6-position by CuAAC click chemistry, yielding two sets of glyco-SCNPs. Cellular uptake is evaluated in HeLa cancer cells, revealing increased uptake upon higher glucose-surface density, with no apparent positional dependance. The general conjugation strategy proposed here can be readily extended to incorporate a wide variety of functional molecules to create vast libraries of multifunctional SCNPs.

Performance of a polymerization-based electrochemically assisted persulfate process on a real coking wastewater treatment.

Industrial wastewater should be treated with caution due to its potential environmental risks. In this study, a polymerization-based cathode/Fe3+/peroxydisulfate (PDS) process was employed for the first time to treat a raw coking wastewater, which can achieve simultaneous organics abatement and recovery by converting organic contaminants into separable solid organic-polymers. The results confirm that several dominant organic contaminants in coking wastewater such as phenol, cresols, quinoline and indole can be induced to polymerize by self-coupling or cross-coupling. The total chemical oxygen demand (COD) abatement from coking wastewater is 46.8% and the separable organic-polymer formed from organic contaminants accounts for 62.8% of the abated COD. Dissolved organic carbon (DOC) abatement of 41.9% is achieved with about 89% less PDS consumption than conventional degradation-based process. Operating conditions such as PDS concentration, Fe3+ concentration and current density can affect the COD/DOC abatement and organic-polymer yield by regulating the generation of reactive radicals. ESI-MS result shows that some organic-polymers are substituted by inorganic ions such as Cl-, Br-, I-, NH4+, SCN- and CN-, suggesting that these inorganic ions may be involved in the polymerization. The specific consumption of this coking wastewater treatment is 27 kWh/kg COD and 95 kWh/kg DOC. The values are much lower than those of the degradation-based processes in treating the same coking wastewater, and also are lower than those of most processes previously reported for coking wastewater treatment.

Electromagnetic porous lignocellulosic matrix composites: A green electromagnetic shielding material with high absorption efficient electromagnetic interference.

Electromagnetic interference (EMI) shielding materials play a vital role in human society, especially in light of the rapid development of electronic communication equipment. Therefore, it is urgent to develop green, high-efficiency EMI shielding materials. Wood, as a renewable raw material, possesses significant structural advantages in studying EMI materials due to its unique 3D pore structure. Herein, we report magnetoelectric lignocellulosic matrix composites derived from the delignified wood for efficient EMI shielding. The composite was fabricated by in-situ polymerization of PEDOT conductive coating and magnetic Fe3O4 in delignified wood. The conductive 3D pore structure of Fe3O4/PEDOT@wood could effectively cause dielectric loss and multiple internal reflections. Combined with the magnetic loss of Fe3O4, the material exhibited excellent EMI shielding effectiveness (SE), which could be attributed to the synergistic effect of dielectric and magnetic losses. The Fe3O4/PEDOT@wood showed excellent conductivity (103 S/m), good magnetism (26.7 emu/g), the EMI SE up to 59.8 dB, and high SEA/SET ratios of~84.2 % to 95.7 % at 2 mm in X -band. Moreover, the material exhibited a high compressive strength and tensile strength of 100.8 MPa and 18.1 MPa, respectively. Therefore, this work provided a reference for the preparation of high-efficiency EMI shielding materials.

Low-Temperature Rapid Polymerization of Intrinsic Conducting PAD/OC Hydrogels with a Self-Adhesive and Sensitive Sensor for Outdoor Damage Repair and Detection.

Intrinsic conducting hydrogels fabricated in situ at low temperatures with self-adhesive properties and excellent flexibility hold significant promise for energy applications and outdoor damage repair. However, challenges such as low polymerization rate and self adhesion, insufficient ionic conductivity, inflexibility, and poor stability under extreme cold conditions have hindered their utilization as high-performance sensors. In this study, we designed an intrinsic conducting hydrogel (PADOC) composed of acrylic acid, acryloyloxyethyltrimethylammonium chloride, N,N'-methylenebis(2-propenamide), self-fabricated oxidized curdlan (OC), and a water/glycerol binary solvent. The novel hydrogel exhibited rapid gelation (30 s) at 0 °C facilitated by the promotion of OC, without the need for external energy input. Our findings from FT-IR, NMR, XPS, XRD, EPR spectra, MS, and DSC analyses revealed that OC underwent selective oxidation via the evolved Fenton reaction at 30 °C, serving as bioaccelerators for PAD polymerization. Due to OC's reductive structure and increased solubility, the reaction activation energy of the PAD polymerization reaction significantly reduced from 103.2 to 54.4 kJ/mol. PADOC ionic hydrogels demonstrated an electrical conductivity of 1.00 S/m, 0.7% low hysteresis, 39.6 kPa self-adhesive strength, and 923% strain-at-break and kept even at -20 °C owing to dense hydrogen and ionic bonds between PAD and OC chains. Furthermore, PADOC ionic hydrogels exhibited antifatigue properties for 10 cycles (0-100%) due to electrostatic interactions and hydrogen bonding. Remarkably, using a self-designed device, the rapid polymerization of PADOC effectively repaired copper pipeline leakage under 86 kPa pressure and detected 1% strain variation as a strain sensor. This study opens a new avenue for the rapid gelation of self-adhesive and flexible intrinsic conducting hydrogels with robust sensor performance.

Tuning the Mechanical Properties of 3D-printed Objects by Mixing Chain Transfer Agents in Norrish Type I Photoinitiated RAFT Polymerization.

Photoinduced 3D printing via photocontrolled reversible-deactivation radical polymerization (photoRDRP) techniques has emerged as a robust technique for creating polymeric materials. However, methods for precisely adjusting the mechanical properties of these materials remain limited. In this study, we present a facile approach for adjusting the mechanical properties of 3D-printed objects by adjusting the polymer dispersity within a Norrish type I photoinitiated reversible addition-fragmentation chain transfer (NTI-RAFT) polymerization-based 3D printing process. We investigated the effects of varying the concentrations and molar ratios of trithiocarbonate (BTPA) and xanthate (EXEP) on the mechanical properties of the printed materials. Our findings demonstrate that increased concentrations of RAFT agents or higher proportions of the more active BTPA lead to a decrease in Young's modulus and glass transition temperatures, along with an increase in elongation at break, which can be attributed to the enhanced homogeneity of the polymer network. Using a commercial LCD printer, the NTI-RAFT-based 3D printing system effectively produced materials with tailored mechanical properties, highlighting its potential for practical applications.

Microstructure Evolution of Reactive Polyurethane Films During In Situ Polyaddition and Film-Formation Processes.

Due to the advantages of low energy consumption, no air and water pollutions, the reactive polyurethane films (RPUFs) are replacing the solvated and waterborne PUFs nowadays, which significantly promotes the green and low-carbon production of PU films. However, the microstructure evolution and in situ film-formation mechanism of RPUFs in solvent-free media are still unclear. Herein, according to time-temperature equivalence principle, the in situ polyaddition and film-formation processes of RPUFs generated by the typical polyaddition of diisocyanate terminated prepolymer (component B) and polyether glycol (component A) are thoroughly investigated at 25 °C. According to the temporal change of viscosity, the RPUFs gradually transfer from liquid to gel and finally to solid state. Further characterizing the molecular weight, hydrogen bonds, crystallinity, gel content, and phase images, the polyaddition and film-formation processes can be divided into three stages as 1) chain extension and microcrystallization; 2) gelation and demicrocrystallization; 3) microphase separation and film-formation. This work promotes the understanding of the microstructure evolution and film-formation mechanism of RPUFs, which can be used as the theoretical guidance for the controllable preparation of high-performance products based on RPUFs.

Polyhedral Vinyl Polymer Particles Synthesized Via Solvent-Free Radical Polymerization.

Liquid marbles (LMs) with a cubic shape are created by using various vinyl monomers as an inner liquid and polymer plates with mm size as a stabilizer. The relationship between the surface tension of the vinyl monomers and formability of the LMs is investigated. LMs can be fabricated using vinyl monomers with surface tensions of 42.7-40.3 mN m-1. The cubic polymer particles are successively synthesized via free-radical polymerizations by irradiation of the cubic LMs with UV light in a solvent-free manner. In addition, controlling the number of polymer plates per one LM, the shape of the plate or the coalescence of the LMs can lead to production of polymer particles with desired forms (e.g., Platonic and rectangular solids) that correspond to the shapes of the original LMs.

Spatioselective Occlusion of Copolymer Nanoparticles within Calcite Crystals Generates Organic-Inorganic Hybrid Materials with Controlled Internal Structures.

Efficient occlusion of particulate additives into a single crystal has garnered an ever-increasing attention in materials science because it offers a counter-intuitive yet powerful platform to make crystalline nanocomposite materials with emerging properties. However, precisely controlling the spatial distribution of the guest additives within a host crystal remains highly challenging. We herein demonstrate a unique, straightforward method to engineer the spatial distribution of copolymer nanoparticles within calcite (CaCO3) single crystals by judiciously adjusting initial [Ca2+] concentration used for the calcite precipitation. More specifically, polymerization-induced self-assembly is employed to synthesize well-defined and highly anionic poly(3-sulfopropyl methacrylate potassium)41-block-poly(benzyl methacrylate)500 [PSPMA41-PBzMA500] diblock copolymer nanoparticles, which are subsequently used as model additives during the growth of calcite crystals. Impressively, such guest nanoparticles are preferentially occluded into specific regions of calcite depending on the initial [Ca2+] concentration. These unprecedented phenomena are most probably caused by dynamic change in electrostatic interaction between Ca2+ ions and PSPMA41 chains based on systematic investigations. This study not only showcases a significant advancement in controlling the spatial distribution of guest nanoparticles within host crystals, enabling the internal structure of composite crystals to be rationally tailored via a spatioselective occlusion strategy, but also provides new insights into biomineralization.

Designing a Naturally Inspired Conductive Copolymer to Engineer Wearable Bioadhesives for Sensing Applications.

The design of adhesive and conductive soft hydrogels using biopolymers with tunable mechanical properties has received significant interest in the field of wearable sensors for detecting human motions. These hydrogels are primarily fabricated through the modification of biopolymers to introduce cross-linking sites, the conjugation of adhesive components, and the incorporation of conductive materials into the hydrogel network. The development of a multifunctional copolymer that integrates adhesive and conductive properties within a single polymer chain with suitable cross-linking sites eliminates the need for biopolymer modification and the addition of extra conductive and adhesive components. In this study, we synthesized a copolymer based on poly([2-(methacryloyloxy)ethyl] trimethylammonium chloride-co-dopamine methacrylamide) (p(METAC-DMA)) using a controlled radical polymerization, allowing for the efficient conjugation of both adhesive and conductive units within a single polymer chain. Subsequently, our multifunctional hydrogel named Gel-MD was fabricated by mixing the p(METAC-DMA) copolymer with non-modified gelatin in which cross-linking took place in an oxidative environment. We confirmed the biocompatibility of the Gel-MD hydrogel through in vitro studies using NIH 3T3 cells as well as in vivo subcutaneous implantation in rats. Furthermore, the Gel-MD hydrogel was effective and sensitive in detecting various human motions, making it a promising wearable sensor for health monitoring and diagnosis.

A Versatile Reversible, Degenerative Chain Transfer Mechanism for the Catalytic Living Ring-Opening Metathesis Polymerization.

Most metathesis polymers based on norbornene derivatives carry a vinyl end group. Here we show that these vinyl end groups readily undergo a degenerative exchange of the terminal methylene unit in the presence of sub-stoichiometric amounts of a propagating metathesis polymer carrying a Grubbs ruthenium complex. We show that this degenerative exchange can be exploited in synthesizing ROMP polymers in a catalytic living fashion. Chain transfer agents based on styrene, or monosubstituted conjugated 1,3 diene derivatives are used as initiating sites for the catalytic living polymerization. Suitable derivatives of these chain transfer agents not only allow the linear living growth of polymers but also the synthesis of block copolymers from macro-initiators or star polymers from multi-functional chain transfer agents. This reversible exchange mechanism offers a cheaper, greener, and more sustainable alternative for the synthesis of living ROMP polymers compared to the classical synthetic route.

A Facile Approach to Construct Novel Polyesters as Soft Midblock for Thermoplastic Elastomers.

The development of innovative synthetic strategies to create functional polycaprolactones is highly demanded for advanced material applications. In this contribution, we reported a facile synthetic strategy to prepare a class of CL-based monomers (R-TO) derived from epoxides. They readily polymerize via well-controlled ring-opening polymerization (ROP) to afford a series of polyesters P(R-TO) with high molecular weight (Mn up to 350 kDa). Sequential addition copolymerization of MTO and L-lactide (L-LA) allowed to access of a series of ABA triblock copolymers with composition-dependent mechanical properties. Notably, P(L-LA)100-b-P(MTO)500-b-P(L-LA)100 containing the amorphous P(MTO) segment as a soft midblock and crystalline P(L-LA) domain as hard end block behaved as an excellent thermoplastic elastomer (TPE) with high elongation at break (1438 ± 204%), tensile strength (23.5 ± 1.7 MPa), and outstanding elastic recovery (>88%).

Organic nanoparticles with tunable size and rigidity by hyperbranching and cross-linking using microemulsion ATRP.

Unlike inorganic nanoparticles, organic nanoparticles (oNPs) offer the advantage of "interior tailorability," thereby enabling the controlled variation of physicochemical characteristics and functionalities, for example, by incorporation of diverse functional small molecules. In this study, a unique inimer-based microemulsion approach is presented to realize oNPs with enhanced control of chemical and mechanical properties by deliberate variation of the degree of hyperbranching or cross-linking. The use of anionic cosurfactants led to oNPs with superior uniformity. Benefitting from the high initiator concentration from inimer and preserved chain-end functionality during atom transfer radical polymerization (ATRP), the capability of oNPs as a multifunctional macroinitiator for the subsequent surface-initiated ATRP was demonstrated. This facilitated the synthesis of densely tethered poly(methyl methacrylate) brush oNPs. Detailed analysis revealed that exceptionally high grafting densities (~1 nm-2) were attributable to multilayer surface grafting from oNPs due to the hyperbranched macromolecular architecture. The ability to control functional attributes along with elastic properties renders this "bottom-up" synthetic strategy of macroinitiator-type oNPs a unique platform for realizing functional materials with a broad spectrum of applications.

Physical properties of experimental light-curing pattern resins based on poly (n-butyl methacrylate) or poly(iso-butyl methacrylate).

Experimental light-curing pattern resins were fabricated to produce pattern resin materials with adequate dimensional stability. The light-curing pattern resins consisted of poly(n-butyl methacrylate) or poly(iso-butyl methacrylate) (PiBMA) polymers and methacrylate monomers. The physical properties, amount of residual ash after burning, Vickers hardness, flexural strength, and volumetric polymerization shrinkage of each material were determined. The data obtained for the prepared resins were compared with those of a commercially available pattern resin, Palavit G (PG). A lower amount of residual ash was observed for some of the prepared resins than for PG. The Vickers hardness and flexural strength values of all experimental resins were lower than those of PG. The volumetric polymerization shrinkage of all the experimental resins based on PiBMA was lower than that of PG. These results suggest that acrylic light-curing resin materials based on PiBMA may be useful for patterning and indexing during soldering.

Living Hybrid Exciton Materials: Enhanced Fluorescence and Chiroptical Properties in Living Supramolecular Polymers with Strong Frenkel/Charge-Transfer Exciton Coupling.

A family of chiral perylene diimides (PDIs) was newly developed as excellent circularly polarized luminescence (CPL) materials. They are asymmetrically derivatized with a double-alkyl-chained L- or D-glutamate unit and a linear or branched alkyl chain. When water is added to the tetrahydrofuran (THF) solution of glutamate-PDI-linear-alkyl chain compounds, kinetically formed H-aggregates are formed in globular nanoparticles (NPs). These NPs undergo spontaneous transformation into thermodynamically stable nanotubes via helical nanostructures, which showed structured broad spectra originating from the strong coupling of delocalized Frenkel excitations (FE) and charge transfer excitations (CTE). Significant enhancement of circular dichroism (CD), fluorescence quantum yield, and circularly polarized luminescence (CPL) with luminescence dissymmetry factor (glum) are observed during the transformation of NPs to the FE/CTE-coupled helical and tubular structures. This transformation process is significantly accelerated by applying physical stimuli, i.e., ultrasonication or adding helical aggregates as seed crystals, a feature unique to living supramolecular polymerization. Meanwhile, the branched chain-containing PDIs only form H-aggregates and did not show FE/CTE hybrid exciton states with living supramolecular polymerization properties. This study unveils that suitably designed chiral PDI derivatives show FE/CTE coupling accompanied by high fluorescence quantum yields, enhanced chiroptical properties, and supramolecular living polymerization characteristics.

Regulation of Precise DNA Repair by Nuclear Actin Polymerization: A Chance for Improving Gene Therapy?

Although more difficult to detect than in the cytoplasm, it is now clear that actin polymerization occurs in the nucleus and that it plays a role in the specific processes of the nucleus such as transcription, replication, and DNA repair. A number of studies suggest that nuclear actin polymerization is promoting precise DNA repair by homologous recombination, which could potentially be of help for precise genome editing and gene therapy. This review summarizes the findings and describes the challenges and chances in the field.