Complicações relacionadas ao uso de polimetilmetacrilato na face: Análise de 209 casos / Complications related to the use of polymethyl methacrylate on the face: Analysis of 209 cases

Introdução: O polimetilmetacrilato é um produto de preenchimento permanente. A injeção deste material na face pode levar a complicações. O objetivo deste estudo é determinar em uma série de casos o tempo mediano de ocorrência de complicações, as áreas mais comprometidas, os tipos de complicações e tratamentos mais realizados. Método: Foram estudados 209 casos de pacientes portadores de complicações relacionadas ao uso de polimetilmetacrilato na face que buscaram tratamento entre o período de janeiro de 2000 a junho de 2021. Os dados analisados foram sexo, idade, número de injeções, momento da aplicação, intervalo de tempo até surgir a complicação, tipo de complicação, região comprometida e tratamento realizado. Resultados: A idade média dos pacientes foi de 45 anos (23 a 79 anos). Destes, 172 eram mulheres e 37 homens. O número de aplicações variou de 1 a 5. O tempo mediano de surgimento de complicações foi de 71 meses. As regiões mais comprometidas foram a malar, em 102 pacientes; mandibular, em 100; e zigomática, em 91. Granuloma foi observado em 135 pacientes; edema, em 120; e inflamação, em 78. O tratamento mais realizado foi a injeção de corticoide, em 111 pacientes, seguido de remoção cirúrgica, em 40. Conclusão: Os resultados podem servir como base de conhecimento para uma melhor compreensão das complicações com o uso de polimetilmetacrilato na face.

Introduction: Polymethylmethacrylate is a permanent filler product. Injecting this material into the face can lead to complications. The objective of this study is to determine in a series of cases the median time for complications to occur, the most affected areas, the types of complications, and the treatments most performed. Method: 209 cases of patients with complications related to the use of polymethyl methacrylate on the face who sought treatment between the period of January 2000 and June 2021 were studied. The data analyzed were gender, age, number of injections, moment of application, interval time until the complication arises, type of complication, affected region, and treatment performed. Results: The average age of patients was 45 years (23 to 79 years). Of these, 172 were women and 37 men. The number of applications ranged from 1 to 5. The median time for complications to appear was 71 months. The most affected regions were the malar, in 102 patients; mandibular, in 100; and zygomatic, in 91. Granuloma was observed in 135 patients; edema, in 120; and inflammation, in 78. The most common treatment was corticosteroid injection, in 111 patients, followed by surgical removal, in 40. Conclusion: The results can serve as a knowledge base for a better understanding of complications with the use of polymethylmethacrylate in the face.

Effects of polymethyl methacrylate-based bone cement graft for treating excessive gingival display and its dimensional facial changes: 12-Month clinical study.

Objective: to present a 12-month follow-up with photographic and tomographic analyses of the effect of polymethyl methacrylate-based bone cement graft (PMMA) in gingival exposure (GE) in patients with excessive gingival display (EGD). Methods: Twelve patients with EGD were included. The PMMA was surgically placed. A frontal and lateral photograph protocol was performed at baseline (T0), 3 (T3), 6 (T6), and 12 months (T12) post-operatively. Soft tissue cone-beam computed tomography (ST-CBCT) was performed at T0 and T12. Measures included GE, length of the lip vermilion (LLV), lip shape (LS), nose width (NW), filter width (FW), nasolabial angle (NAS) while smiling, and nasolabial angle at rest (NAR). The height, thickness, and volume of the cement graft were also measured in the ST-CBCT. The comparisons were performed by Kruskal-Wallis test at 5 % of significance (p < 0.05). Results: The height, thickness, and volume of the PMMA were respectively 12.84 ± 1.59 mm, 3.83 ± 0.53, and 1532.02 ± 532.52 mm3. PMMA significantly decreased GE from 8.33 ± 1.25 mm (T0) to 6.60 ± 0.93 mm (T12) (p < 0.01). NAR was 98.34 ± 9.28° at T0 and increased to 105.13 ± 7.33° at T12; however, the angle value was not statistically different (p = 0.08). LLV, LS, NW, FW, and NAS did not exhibit statistical differences between the baseline and follow-up periods. Conclusions: PMMA significantly decreased GE in a 12-month follow-up without influencing adjacent soft tissue anatomical structures.

Physical analysis of an acrylic resin modified by metal and ceramic nanoparticles.

BACKGROUND: Nanoparticles (NPs) have gained significant attention in various fields due to their unique properties and potential applications. Polymethyl methacrylate (PMMA) is an acrylic resin widely used in dentistry and medicine. However, the effect of different types of NP fillers on the physical properties of PMMA-based resins has not been thoroughly explored in the literature. OBJECTIVES: The present study aimed to evaluate the effects of 3 different types of NP fillers on the physical properties of an experimental PMMA-based resin as a function of the NP content and concentration. MATERIAL AND METHODS: Ten groups (n = 10) were designed. The specimens were composed of an acrylic resin, silicon dioxide (SiO2), cerium dioxide (CeO2), and titanium dioxide (TiO2) at the following ratios (wt%): group 1 (G1) - control; group 2 (G2) - 0.5% SiO2; group 3 (G3) - 1% SiO2; group 4 (G4) - 3% SiO2; group 5 (G5) - 0.5% CeO2; group 6 (G6) - 1% CeO2; group 7 (G7) - 3% CeO2; group 8 (G8) - 0.5% TiO2; group 9 (G9) - 1% TiO2; and group 10 (G10) - 3% TiO2. Transmission electron microscopy (TEM) was used to assess the quality of NP dispersion. Thermal stability was assessed with thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The effects of the abovementioned NPs on the properties of the resin were evaluated using the Archimedes principle for density, the Vickers hardness (VH) test and the impact strength (IS) test. Data analysis employed the oneand two-way analysis of variance (ANOVA), followed by Duncan's post hoc test at a significance level of 0.05. RESULTS: Transmission electron microscopy showed partial NP dispersion. All types of NPs enhanced the mechanical properties of the acrylic resin except for IS, which was similar to that of the control group. Among the types of NPs, irrespective of the weight percentage, CeO2 showed higher thermal stability and higher IS for 0.5 wt% and 1 wt% as compared to other groups, as well as the highest values of density at 0.5 wt%, 1 wt% and 3 wt%. Titanium oxide at 1 wt% presented a higher VH as compared to other groups. The fracture pattern was the same for all groups. CONCLUSIONS: Incorporating the tested NPs into the acrylic resin resulted in enhanced physical properties, primarily attributed to a lower NP content.

Influence of thermal cycles and disinfection on the roughness, microhardness and color of PETG/TPU and PMMA.

BACKGROUND: Occlusal splints can protect teeth during bruxism, preventing tooth wear, as well as during sports activities, shielding them from impacts. OBJECTIVES: To verify the influence of thermal cycles and disinfection on the roughness, microhardness and color of polyethylene terephthalate glycol/thermoplastic polyurethane (PETG/TPU) and poly(methyl methacrylate) (PMMA). MATERIAL AND METHODS: Thirty-six PETG/TPU samples and 36 PMMA samples were prepared (ø10 mm × 3 mm). Six groups were created according to the material and the disinfection method used (n = 12 each): PETG/TPU (glister), PETG/TPU (hypochlorite), PETG/TPU (soap), PMMA (glister), PMMA (hypochlorite), and PMMA (soap). Roughness, Knoop microhardness and color evaluations were performed before the experiments (T1), after thermocycling (T2) and after disinfection (T3). Three-way repeated measures analysis of variance (ANOVA) and Tukey's test were used for statistical evaluations. RESULTS: For roughness and color, ANOVA showed statistical significance based on the interaction between thermal cycling, material and disinfectant factors. In terms of Knoop microhardness, ANOVA showed statistical significance based on the interaction between thermal cycling and material factors. CONCLUSIONS: Roughness results were clinically acceptable in all groups at all time points, except the PETG/TPU and PMMA groups disinfected with hypochlorite. Microhardness significantly increased for both materials after thermal cycling, and at all time points, the microhardness of PMMA was significantly higher than that of PETG/TPU. After thermal cycling, the color changes were clinically unacceptable in all groups.

Induced membrane technique using bone cement with or without cefazolin in chicken segmental radius defect.

The utilization of antibiotic-loaded cement spacer in the induced membrane development has been a debate topic in human medicine. To the best of the author's knowledge, these combinations have not yet been evaluated in birds. Therefore, this study assessed induced membrane formation using radiography and histology, in a segmental defect of a chicken radius, with or without the addition of cefazolin. Thirty 18-month-old healthy chickens were divided into two equal groups: G1-bone defect filled with bone cement; G2-bone defect filled with cefazolin powder-loaded bone cement. Radiographic examinations of the left forearm were taken immediately after surgery and at 7, 15, and 21 postoperative days. For the collection of the induced membranes, five chickens in each group were euthanized at 7, 15, and 21 days after surgery. Radiographically, the bone cement was identified as a radiopaque structure occupying the bone defect in both groups. Mild new bone formation in at least one of the fractured extremities of the bone defect was seen only 21 days after surgery in most chickens. Histologically, there was no difference in the mean thickness of the induced membrane between groups at all time points. Multifocal multinucleated cells differed between groups at 7 (G1 > G2) and 21 (G2 > G1) days after surgery. Mononuclear inflammatory infiltrate differed between groups only on day 21 (G1 > G2). Fibrous tissue proliferation did not differ between groups at all evaluation times. Blood vessel density differed only at 21 days postoperatively (G2 < G1). Multifocal areas of cartilage differed between groups at all time points (G1 > G2). In conclusion, cefazolin mixed with bone cement did not affect thickness of the induced membrane, but did result in a negative effect on some histological aspects, such as fewer vessels, less multifocal areas of cartilage, and persistence of inflammation.

Antibiofilm properties of silver nanoparticles incorporated into polymethyl methacrylate used for dental applications.

BACKGROUND: Acrylic resins used in dental and biomedical applications do not have antimicrobial properties, their surface is susceptible to colonization of microorganisms. OBJECTIVE: The aim of this study was to evaluate the antibiofilm properties of silver nanoparticles (AgNPs) deposited in a polymethyl methacrylate (PMMA) surface against a Staphylococcus aureus biofilm. METHODS: The PMMA was impregnated with AgNPs by using the in-situ polymerization method. To determine the solubility of the incorporated silver (Ag+) atomic absorption spectrophotometry was used (AAS) at 24 h, 48 h, 7 days, and 30 days. Thirty specimens of PMMA with AgNPs and without NP (control group) were assembled in the CDC Biofilm Bioreactor system with a cell suspension of S. aureus. The specimens were removed at 6, 12, 24, 48, and 72 h to determine the viability profile and quantify the Arbitrary Fluorescence Units (AFU). RESULTS: The AgNPs showed an irregular and quasispherical shape with an average size of 25 nm. AAS analysis demonstrated a low solubility of Ag+. The formation of the S. aureus biofilm increased as the evaluation periods continued up to 72 h. The experimental group showed poor growth, and a decrease in the intensity of the fluorescence demonstrated a statistically significant inhibition of the formation of the biofilm (P < 0.05) in relation to the control group at 6, 12, 24, 48, and 72 h. CONCLUSION: AgNPs incorporated into PMMA decreased the growth and maturation of S. aureus biofilm.

Antimicrobial Activity in Chitosan-Treated Prosthetic Materials: A Systematic Review.

OBJECTIVE: The antimicrobial effect of prosthetic materials treated with chitosan was systematically reviewed. METHODS: The searches were carried out on PubMed/Medline, Scopus, ISI Web of Science, LILACS, Embase, and Open Grey with searches performed in March 2022. Selection of in vitro studies, data extraction and risk of bias analysis were performed following the PRISMA guidelines and registered at the Open Science Framework. The evaluated prosthetic materials corresponded to PMMA and tissue conditioner, treated with chitosan. RESULTS: After evaluating the eligibility criteria, 11 articles were included for the qualitative synthesis. The evaluated prosthetic materials corresponded to PMMA (n=8) and tissue conditioner (n=3). All studies performed the incorporation of chitosan in the tissue conditioner (n=3). Regarding PMMA, the use of chitosan as a denture cleanser was the most used (n=3), followed by incorporation (n=2), multilayers coating onto PMMA (n=2) and denture adhesive for PMMA (n=1). Chitosan has antimicrobial activity and is effective in the treatment of prosthetic materials in most studies, but it depends on some factors, such as the treatment method, the type and characteristics of the chitosan, the microorganism evaluated, and its form of organization. CONCLUSION: Chitosan showed highly antimicrobial activity and was effective when used in prosthetic materials.

3D-printed PMMA implant for gingival smile treatment through the VISTA technique: A report of a new approach.

BACKGROUND: A gingival display higher than 3 mm is considered a characteristic of a gingival smile (GS). Several etiological factors have been associated to GS and for this reason various treatments have been proposed according to its etiology. The aim of this study is to present a case with an alternative technique to treat GS with minimally invasive vestibular incision subperiosteal tunnel access (VISTA) and polymethyl methacrylate (PMMA) implants for lip repositioning. METHODS AND RESULTS: The patient, a 25-year-old woman diagnosed with excessive gingival exposure, had previously done botulinum toxin (BoNT) injections and did not like the result. She had a major subnasal depression and the upper lip would lodge in there during spontaneous smile. She was informed about all options of treatment and agreed to a lip repositioning installing a customized PMMA implant. CONCLUSION: This is the first study to our knowledge to present a case with use of a PMMA implant associated with the VISTA approach for lip repositioning and gingival smile correction. The results are encouraging, and the patient was satisfied with results accomplished by this technique. KEY POINTS: Why is this case new information? This is a new and innovative surgical approach for gingival smile with PMMA implants through a minimally invasive technique (VISTA). What are the keys to successful management of this case? Well-defined presurgical planning and the presence of the upper lip lodging in the subnasal depression during spontaneous smile. What are the primary limitations to success in this case? Cases with vertical maxillary excess and those in which osteotomy/osteoplasty is indicated. It is a technique-sensitive treatment dependent on the clinician's experience.

Effect of different mechanical surface treatments on flexural strength of repaired denture base / Efecto de diferentes tratamientos superficiales mecánicos sobre la resistencia a la flexión de la base de la dentadura reparada

Aim: To assess the effect of different mechanical surface treatments on flexural strength of repaired denture base. Material and Methods: Sixty bar-shaped specimens of heat-polymerized acrylic resin were fabricated, and divided into six groups (n=10). All specimens, except the positive control group (group PC), were sectioned into halves to create a 1-mm clearance. A negative control group with no surface treatment (group NC) was also considered. Other groups underwent different surface treatments: group Laser; treated with erbium: yttrium-aluminum-garnet (Er:YAG) laser, group APA; airborne-particle abrasion (APA), group APA plus Laser; a combination of laser and APA, and group Bur; bur grinding. After measuring surface roughness (Ra) with a profilometer, all sectioned specimens were repaired by auto-polymerizing acrylic resin, and thermocycled afterward. Three-point bending test was performed by a universal testing machine. Data were statistically analyzed (α=0.05). Results: The mean surface roughness of all experimental groups were significantly higher than that of group NC (p<0.05). The mean flexural strength of all groups was significantly lower than that of group PC (p<0.05). Group B had significantly higher flexural strength than the other surface-treated groups (p<0.05). Group Laser had significantly higher flexural strength than groups APA (p=0.043) and APA plus Laser (p=0.023). No significant difference was found between groups APA and APA plus Laser (p=0.684). Conclusion: All surface treatments increased the surface roughness and flexural strength compared with the untreated group. The highest flexural strength was observed in specimens treated by bur grinding and then laser, however, it was still significantly lower than intact specimens.

Objetivo: Evaluar el efecto de diferentes tratamientos superficiales mecánicos sobre la resistencia a la flexión de la base de la prótesis reparada. Material y Métodos: Se fabricaron sesenta especímenes en forma de barra de resina acrílica termo-polimerizada y se dividieron en seis grupos (n=10). Todas las muestras, excepto el grupo de control positivo (grupo PC), se seccionaron en mitades para crear un espacio libre de 1 mm. También se consideró un grupo de control negativo sin tratamiento superficial (grupo NC). Otros grupos se sometieron a diferentes tratamientos superficiales: grupo Láser; tratados con láser de erbio: itrio-aluminio-granate (Er:YAG), grupo APA; abrasión por partículas en el aire (APA), grupo APA más láser; una combinación de láser y APA, y grupo Bur; molienda de fresas. Después de medir la rugosidad de la superficie (Ra) con un perfilómetro, todas las muestras seccionadas se repararon con resina acrílica de autopolimerización y se sometieron a termociclado. La prueba de flexión de tres puntos se realizó con una máquina de prueba universal. Los datos se analizaron estadísticamente (α=0,05). Resultados: La rugosidad superficial media de todos los grupos experimentales fue significativamente mayor que la del grupo NC (p<0,05). La resistencia media a la flexión de todos los grupos fue significativamente menor que la del grupo PC (p<0,05). El grupo B tenía una resistencia a la flexión significativamente mayor que los otros grupos tratados en la superficie (p<0,05). El grupo Láser tuvo una resistencia a la flexión significativamente mayor que los grupos APA (p=0,043) y APA más Láser (p=0,023). No se encontró diferencia significativa entre los grupos APA y APA más Láser (p=0,684). Conclusión: Todos los tratamientos superficiales aumentan la rugosidad de la superficie y la resistencia a la flexión en comparación con el grupo sin tratar. La resistencia a la flexión más alta se observó en las muestras tratadas con fresado y luego con láser; sin embargo, aún era significativamente más baja que las muestras intactas.

Craneoplastía con prótesis de polimetilmetacrilato y planificación en 3D. Presentación de caso clínico y revisión de la literatura / Cranioplasty with polymethylmethacrylate prosthesis and 3D planification, case report and literature review

En este artículo se muestra que es posible realizar una prótesis digital con polimetilmetacrilato (PMMA) de forma sencilla con programas gratuitos y una impresora 3D de bajo costo y de fácil manejo. El caso clínico corresponde a un masculino de 38 años de edad quien refiere haber sido operado de urgencia por un hematoma subdural de origen traumático, secundario a una caída desde un andamio de 5 metros de altura, por parte del Servicio de Neurocirugía con una craneotomía descompresiva 10 meses atrás, actualmente presentando un defecto en región supraorbitaria y frontal bilateral y refiriendo cefaleas y mareos constantes con diagnóstico de síndrome del trefinado. Se decide diseñar digitalmente una prótesis con PMMA colocándola bajo anestesia general balanceada en quirófano mediante un acceso coronal, fijándola con tornillos de titanio y reposicionando tejidos con suturas. Se logra eliminar de forma inmediata el defecto visual, la sintomatología desapareció por completo confirmándolo en los controles desde los 7 días. Se muestra que es posible realizar una prótesis craneal personalizada de bajo costo de forma sencilla, resolviendo las molestias y eliminando las secuelas y complicaciones que afectan a los pacientes tratados por craniectomías descompresivas con presencias de defectos.

In this aticle it is showns that it is possible to make a digital prosthesis with Polymethylmethacrylate (PMMA) with free programs and a low-cost and easy-to-use 3D printer. The clinical case corresponds to a 38-year-old male who reported having undergone emergency surgery for a subdural hematoma of traumatic origin, secondary to a fall from a 5-meter-high scaffolding, procedure done by the Neurosurgery Service with a decompressive craniotomy 10 months ago, nowadays he presents a bilateral defect at the supraorbital and frontal region, referring constant headaches and dizziness with a diagnosis of a trephination syndrome. We decided to digitally design a prosthesis with PMMA, placing it under balanced general anesthesia in the operating room through a coronal approach, fixing it with titanium screws and repositioning tissues with sutures. The visual defect was immediately eliminated, the symptoms disappeared completely, confirming it at the controls since day 7. It is shown that it is possible to perform a low-cost personalized cranial prosthesis in a simple way, solving the discomfort and eliminating the sequelae and complications that affect patients treated by decompressive craniectomies with the presence of defects.

Sarcoidose cutânea e preenchimento facial: um possível evento desencadeante? / Cutaneous sarcoidosis and facial filling: a possible triggering event?

A sarcoidose é uma doença granulomatosa sistêmica com envolvimento cutâneo em 10 a 25% dos casos. O quadro cutâneo tem sido frequentemente associado a traumas prévios, incluindo o uso de preenchedores cutâneos. Apresenta-se caso de paciente com placa eritematosa em dorso nasal com 12 meses de evolução e histórico de preenchimentos prévios com PMMA e ácido hialurônico. A biópsia cutânea evidenciou processo inflamatório granulomatoso de padrão epitelióide e células gigantes multinucleadas, características de sarcoidose cutânea. As reações granulomatosas tardias podem estar associadas ao uso de preenchedores, tanto pelo trauma provocado pelas cânulas quanto pelos antígenos dos preenchedores utilizados

Sarcoidosis is a systemic granulomatous disease with skin involvement in 10% to 25% of cases. This skin condition has been associated with previous trauma, including the use of skin fillers. We present the case of a patient with an erythematous plaque on the nasal dorsum with 12 months of evolution and a history of previous facial fillings with polymethylmethacrylate and hyaluronic acid. Skin biopsy showed a granulomatous inflammatory process with an epithelioid pattern and multinucleated giant cells, characteristic of cutaneous sarcoidosis. Sarcoidosis can occasionally manifest without systemic involvement and may be associated with the previous use of long-term tissue fillers

Boosting cell proliferation in three-dimensional polyacrylates/nanohydroxyapatite scaffolds synthesized by deep eutectic solvent-based emulsion templating.

Among three-dimensional (3D) scaffold fabrication methods, porous polymers templated using high internal phase emulsions (HIPEs) have emerged as an attractive method due to the facile generation of interconnected porosity through a variety of synthetic routes. These include a bottom-up approach to selectively incorporate nanomaterials onto the inner walls in a nonaqueous environment. In this work, novel nonaqueous HIPEs made of different (meth)acrylate monomers and a deep eutectic solvent (DES) were formulated with nonfunctionalized nanohydroxyapatite (NHA), which also played the role of cosurfactant. Free radical polymerization of HIPEs yielded free-standing nanocomposites with 3D interconnected macroporosity and nonfunctionalized NHA selectively decorating the scaffolds' inner surface. The influence of different polymer functionalities, acrylate or methacrylate, their alkyl tail length, and the presence of NHA on MC3T3-E1 preosteoblast cell proliferation in vitro, reactive oxygen species (ROS) production and alkaline phosphatase (ALP) activity were evaluated. All materials presented promising biocompatibility, non-hemolytic activity, negligible inflammatory response along to remarkably enhanced cell proliferation (e.g., up to 160-fold cell proliferation increase compared with polystyrene plate) in vitro, which open the path for the development of scaffolds in regenerative medicine. It is noteworthy that polyHIPEs studied here were obtained using a green synthetic protocol where nonfunctionalized nanoparticles can be selectively incorporated into a scaffolds' inner walls. This versatile technique allows for the simple construction of 3D bioactive nanocomposite scaffolds with varied compositions for cell culture.

Antibiotic cement-coated plate is a viable and efficient technique for the definitive management of metaphyseal septic nonunions of the femur and tibia / O uso de placas revestidas de cimentado com antibiótico é uma técnica viável e eficiente para o tratamento da pseudoartrose infectada da metáfise do fêmur e da tíbia

ABSTRACT Objective: the management of septic metaphyseal nonunions is challenging, with inconsistent outcomes. Antibiotic cement-coated implants have been demonstrated good outcome for diaphyseal infected nonunions, however there is no data in metaphyseal infected nonunions. Methods: fifteen adult patients with septic metaphyseal nonunions of the femur or tibia were treated with antibiotic cement-coated plates. The antibiotic cement-coated plate was prepared with either gentamicin or vancomycin. Outcome measures were infection control, bone healing, return to pre-injury level on daily activities, and quality of life at the last follow-up visit. A p value of <5% was considered significant. Results: Methicillin-susceptible S. aureus was isolated in 53.3% cases. Average postoperative follow-up time was 18 months. Local infection control and radiographic bone healing were adequately achieved in 93.3% patients. No patient presented recurrent symptoms of surgical site infection. Fourteen patients reported to be either able, or on the same level as before injury, with 73.3% reporting no problems in all five dimensions of the EQ-5D-3L. Persistent infection was the only variable associated with a reduced long-term quality of life. Conclusion: antibiotic cement-coated plate is a viable and efficient surgical technique for the definitive management of juxta-articular metaphyseal septic nonunions of the femur and tibia.

RESUMO Introdução: implantes revestidos de cimento com antibiótico vêm demonstrando bons resultados no tratamento da pseudoartrose infectada da diáfise, no entanto seu uso na metáfise dos ossos longos ainda é pouco explorado. Neste estudo relatamos uma série de casos de pseudoartrose infectada da metáfise do fêmur e da tíbia tratados com o uso de placas revestidas de cimento com antibiótico. Métodos: Os antibióticos usados foram gentamicina e/ou vancomicina. Os desfechos analisados na última visita ambulatorial foram controle de infecção, consolidação óssea, retorno às atividades diárias e qualidade de vida. Regressão linear bivariada foi usada para avaliar fatores individuais que afetaram a qualidade de vida dos pacientes. Um valor p<5% foi considerado estatisticamente significativo. Resultados: quinze pacientes adultos foram incluídos no estudo. S. aureus suscetível à meticilina foi isolado em 53,3% dos casos. O tempo médio de acompanhamento pós-operatório foi de 18 meses. Controle local da infecção e consolidação óssea radiográfica foram alcançados em 93,3% dos pacientes. Nenhum paciente apresentou sintomas recorrentes de infecção de sítio cirúrgico. Quatorze pacientes relataram ser capazes, mas não no nível pré-lesional ou no mesmo nível de antes da lesão, com 73,3% relatando nenhum problema em todas as cinco dimensões do EQ-5D-3L. Infecção persistente foi a única variável associada à redução da qualidade de vida a longo prazo. Conclusão: A placa revestida de cimento com antibiótico mostrou-se uma técnica cirúrgica viável e eficiente para o tratamento da pseudoartrose infectada da metáfise do fêmur e da tíbia.

Evaluation of Intramedullary Methods with Polymethylmethacrylate for Fixation of Bone Lesions of the Extremities.

Objective To evaluate the better potential and functional results in pain control in the treatment of pathological fractures and prophylactic fixation with an intramedullary nail associated with polymethylmethacrylate, compared with the utilization of an intramedullary nail in long bone tumor lesions. Methods From January 2012 to September 2017, 38 patients with 42 pathological lesions (fractures or impending fractures according to the Mirels criteria) were treated surgically. Sixteen patients allocated to the control group underwent a locked intramedullary nail fixation, and 22 patients with pathological lesions were allocated to treatment with an intramedullary nail associated with polymethylmethacrylate. Postoperatively, the patients were submitted to the Musculoskeletal Tumor Society (MSTS) rating scale, radiographic assessment, and to the assessment of events and complications related to the treatment. Results The evaluation using the MSTS questionnaire showed better functional results in the group associated with polymethylmethacrylate, in comparison with the control group, which obtained an average score of 16.375 out of a maximum of 30 points (54.6%). The group studied with association with polymethylmethacrylate obtained a mean of 22.36 points (74.5%). The procedure proved to be safe, with similar complication and severity rates, and with no statistical difference in comparison with the standard treatment. Conclusion Stabilization of tumor lesions with an internal fixation associated with the polymethylmethacrylate demonstrated early rehabilitation and improved the quality of life, allowing rapid functional recovery. The use of polymethylmethacrylate has advantages such as reduced bleeding, tumor necrosis and higher mechanical stability.

Evaluation of Intramedullary Methods with Polymethylmethacrylate for Fixation of Bone Lesions of the Extremities / Avaliação de métodos intramedulares com polimetilmetacrilato para fixação em lesões ósseas de extremidades

Abstract Objective To evaluate the better potential and functional results in pain control in the treatment of pathological fractures and prophylactic fixation with an intramedullary nail associated with polymethylmethacrylate, compared with the utilization of an intramedullary nail in long bone tumor lesions. Methods From January 2012 to September 2017, 38 patients with 42 pathological lesions (fractures or impending fractures according to the Mirels criteria) were treated surgically. Sixteen patients allocated to the control group underwent a locked intramedullary nail fixation, and 22 patients with pathological lesions were allocated to treatment with an intramedullary nail associated with polymethylmethacrylate. Postoperatively, the patients were submitted to the Musculoskeletal Tumor Society (MSTS) rating scale, radiographic assessment, and to the assessment of events and complications related to the treatment. Results The evaluation using the MSTS questionnaire showed better functional results in the group associated with polymethylmethacrylate, in comparison with the control group, which obtained an average score of 16.375 out of a maximum of 30 points (54.6%). The group studied with association with polymethylmethacrylate obtained a mean of 22.36 points (74.5%). The procedure proved to be safe, with similar complication and severity rates, and with no statistical difference in comparison with the standard treatment. Conclusion Stabilization of tumor lesions with an internal fixation associated with the polymethylmethacrylate demonstrated early rehabilitation and improved the quality of life, allowing rapid functional recovery. The use of polymethylmethacrylate has advantages such as reduced bleeding, tumor necrosis and higher mechanical stability.

Resumo Objetivo Avaliar o potencial melhor resultado funcional e controle álgico no tratamento de fraturas patológicas e fixações profiláticas tratadas com haste intramedular associada ao polimetilmetacrilato (PMMA) em comparação com o uso de haste intramedular em lesões tumorais em ossos longos. Métodos De janeiro de 2012 a setembro de 2017, 38 pacientes com 42 lesões patológicas (fraturas ou iminência segundo os critérios de Mirels) foram tratados cirurgicamente. Dezesseis pacientes submetidos a fixação com haste intramedular bloqueada foram alocados ao grupo controle e 22 pacientes com lesões patológicas foram alocados para tratamento com haste intramedular associada ao PMMA. No pósoperatório, foi realizada a submissão dos pacientes ao escore da Musculoskeletal Tumor Society (MSTS, na sigla em inglês) e à avaliação radiográfica do tratamento realizado, assim como à avaliação de intercorrências e complicações relacionadas ao tratamento. Resultados A avaliação através do questionário MSTS demonstrou melhor resultado funcional do grupo associado com PMMA quando comparado com o grupo controle, o qual obteve uma pontuação média de 16,375 em um máximo de 30 pontos (54,6%), enquanto o grupo em estudo com associação do PMMA obteve uma média de 22,36 pontos (74,5%). O procedimento mostrou-se seguro, taxas de complicações e gravidade semelhantes e sem diferença estatística quando comparado com o tratamento padrão. Conclusão A estabilização de lesões tumorais com fixação associada ao PMMA demonstrou reabilitação precoce e melhora na qualidade de vida, permitindo rápida recuperação funcional. A utilização do PMMA apresenta vantagens como diminuição do sangramento e da necrose tumoral e maior estabilidade mecânica.

Reação de corpo estranho após reconstrução órbito-zigomático-maxilar com polimetilmetacrilato: relato de caso / Strange body reaction after orbit-zygomatic-maxillary reconstruction with polymethyl methacrylate: case report

Pacientes com históricos de defeitos ósseos provocados por infecções, malformação congênita, neoplasias, deformação por iatrogenia, radioterapia e trauma buscam contornos faciais mais harmônicos através da reabilitação cirúrgica. Para facilitar a reconstrução maxilofacial dois grupos de materiais podem ser utilizados, os enxertos ósseos e os materiais aloplásticos. O objetivo é relatar um caso incomum de infecção e exposição de material utilizado para enxertia a base de polimetilmetacrilato, bem como a sua posterior reabordagem cirúrgica. Embora o Polimetilmetacrilato aparente ser seguro, ele exibe complicações diversas em função da imunologia do hospedeiro, que poderá reagir de diferentes formas. Desse modo, faz-se necessário ressaltar a importância da prevenção e proservação de cada caso de forma individualizada(AU)

Patients with a history of bone defects caused by infections, congenital malformation, neoplasms, iatrogenic deformation, radiotherapy and trauma seek more harmonious facial contours through surgical rehabilitation. To facilitate maxillofacial reconstruction, two groups of materials can be used, bone grafts and alloplastic materials. The objective is to report an unusual case of infection and exposure of material used for grafting with polymethylmethacrylate, as well as its subsequent surgical approach. Although Polymethylmethacrylate appears to be safe, it exhibits different complications depending on the host's immunology, which may react in different ways. Thus, it is necessary to emphasize the importance of preventing and preserving each case individually(AU)

Case reports of hypercalcemia and chronic renal disease due to cosmetic injections of polymethylmethacrylate (PMMA) / Relatos de casos de hipercalcemia e doença renal crônica devidas a injeções de polimetilmetacrilato (PMMA) por razões estéticas

Abstract Cosmetic injections of fillers are common plastic surgery procedures worldwide. Polymethylmethacrylate (PMMA) is a filler approved only for minimally invasive procedures in facial tissue and is among the most frequently used injectable substances for cosmetic purposes. Injection of a large volume of PMMA may lead to the development of severe hypercalcemia and chronic kidney damage in a probably underestimated frequency. In such cases, hypercalcemia develops due to a granulomatous foreign body reaction with extrarenal production of calcitriol. In the present report, we describe the cases of two patients who received injections of large volumes of PMMA and developed severe hypercalcemia and advanced chronic kidney disease. These reports highlight the importance of adhering to regulations regarding the use of PMMA and properly informing patients of the possibility of complications before undertaking such procedures.

Resumo Injeções de preenchimento de caráter estético são procedimentos comuns em cirurgia plástica em todo o mundo. O polimetilmetacrilato (PMMA) é um material de preenchimento aprovado apenas para procedimentos minimamente invasivos no tecido facial, e está entre as substâncias injetáveis mais frequentemente usadas para fins estéticos. A injeção de um grande volume de PMMA pode levar ao desenvolvimento de hipercalcemia grave e lesão renal crônica em uma frequência provavelmente subestimada. Nesses casos, a hipercalcemia se desenvolve devido a uma reação granulomatosa de corpo estranho, secundária à produção extrarenal de calcitriol. No presente artigo, descrevemos os casos de dois pacientes que receberam injeções de grandes volumes de PMMA e desenvolveram hipercalcemia grave e doença renal crônica avançada. Esses relatos destacam a importância de seguir as regulamentações sobre o uso do PMMA e informar adequadamente os pacientes sobre a possibilidade de complicações antes de realizar tais procedimentos.

Biological and physico-mechanical properties of poly (methyl methacrylate) enriched with graphene oxide as a potential biomaterial / Propiedades físicas-mecánicas-biológicas del poli (metilmetacrilato) enriquecido con óxido de grafeno como potencial biomaterial

Objective: To determine the cytotoxicity and effects of graphene oxide (GO) on cellular proliferation of gingival-fibroblasts, pulp-dental cells and human osteoblasts in culture, and to determine the physical, mechanical and biological properties of poly (methyl methacrylate) (PMMA) enriched with GO. Material and Methods: The GO was characterized with SEM. Cytotoxicity and cell proliferation were determined by the MTT bioassay. The physical mechanical tests (flexural strength and elastic modulus) were carried out with a universal testing machine. Sorption and solubility were determined by weighing before and after drying and immersion in water. Porosity was evaluated by visual inspection. Data were analyzed with Student's t-test and Tukey's posthoc ANOVA. Results: The GO has a heterogeneous morphology and a particle size of 66.67±64.76 µm. GO has a slight to no-cytotoxicity (>50-75% viability) at 1-30 days, and at 24 hours incubation of PMMA with GO significantly stimulates osteoblasts (45±8%, p<0.01). The physical and mechanical properties of PMMA with GO increase considerably without altering sorption, solubility and porosity. Conclusion: GO alone or with PMMA has an acceptable biocompatibility, could contribute to cell proliferation, cell regeneration and improve the physical mechanical properties of PMMA.

Objective: To determine the cytotoxicity and effects of graphene oxide (GO) on cellular proliferation of gingival-fibroblasts, pulpdental cells and human osteoblasts in culture, and to determine the physical, mechanical and biological properties of poly (methyl methacrylate) (PMMA) enriched with GO. Material and Methods: T he G O w as c haracterized with SEM. Cytotoxicity and cell proliferation were determined by the MTT bioassay. The physical-mechanical tests (flexural strength and elastic modulus) were carried out with a universal testing machine. Sorption and solubility were determined by weighing before and after drying and immersion in water. Porosity was evaluated by visual inspection. Data were analyzed with Student's t-test and Tukey's post-hoc ANOVA. Results: The GO has a heterogeneous morphology and a particle size of 66.67±64.76 ?m. GO has a slight to no-cytotoxicity (>50-75% viability) at 1-30 days, and at 24 hours incubation of PMMA with GO significantly stimulates osteoblasts (45±8%, p<0.01). The physical and mechanical properties of PMMA with GO increase considerably without altering sorption, solubility and porosity. Conclusion: GO alone or with PMMA has an acceptable biocompatibility, could contribute to cell proliferation, cell regeneration and improve the physical-mechanical properties of PMMA.

Influence of the Surface Energy of Different Brands of Polymethyl Methacrylate on the Adherence of Candida albicans: An In Vitro Study.

OBJECTIVE: The objective of this study was to evaluate the influence of the surface energy of different brands of polymethyl methacrylate (PMMA) on the adherence of Candida albicans ATCC 10231 in an in vitro study. MATERIALS AND METHODS: The study had an in vitro, longitudinal, and comparative experimental design. The following groups were made: (1) Vitacryl versus controls (water, dimethyl sulfoxide, glycerol, diethylene glycol, and formamide); (2) Triplex versus the same controls; (3) Vitacryl versus Triplex (surface energy); and (4) Vitacryl versus Triplex (adhesion per cell/field). Adhesion was measured in the area of each field magnified 10 × 10, and with an increase in magnification to 40 × 10, very dense colonies of 0.152 mm2 were observed. RESULTS: The surface energy of Vitacryl and Triplex was 40.3 ± 0.3 and 39.5 ± 0.3N/m, respectively, showing statistically significant differences (P < 0.001). On the contrary, in relation to the adhesion per cell/field of C. albicans, Vitacryl presented 15.7 ± 1.1, whereas Triplex had 16.7 ± 2.3, with no significant differences (P = 0.058). CONCLUSION: In relation to the adhesion per cell/field of C. albicans, there was no evidence of significant differences between Vitacryl and Triplex.

Nanopartículas de prata em bases de próteses de PMMA para controle de atividade microbiana / Silver nanoparticles in PMMA prosthesis bases to control microbial activity

Objetivo:Avaliar in vitro a atividade de Staphylococcus aureus e Candida albicans em bases de próteses convencionais à base de polimetilmetacrilato de metila com nanopartículas de prata incorporadas a sua composição. Métodos: Foi realizado um estudo experimental laboratorial com resinas acrílicas autopolimerizáveis comercialmente disponíveis, Vipi Flash/VIPI e JET/Clássico. Foram confeccionados 80 corpos de prova, divididos em 16 grupos (n = 5), referentes ao tipo de resina, tratamento (incorporação e imersão na solução de nanopartículas de prata) e microrganismo inoculado. As nanopartículas foram sintetizadas com ácido polimetacrílico, nitrato de prata e irradiadas com luz ultravioleta de baixa potência (~8W) por 6 horas, e as suas concentrações idealizadas pelo método de microdiluição em placas para determinação da concentração mínima inibitória frente aos microrganismos selecionados. Verificou-se ação bactericida e fungicida com concentração inicial de 25% e após fator de diluição 12,5%. Resultados: Houve dificuldade de incorporação das nanopartículas na resina acrílica, que pode decorrer da alteração da proporção 3:1 recomendada pelo fabricante ou pela redução ou inativação da ação da nanopartícula de prata pela interação com o polimetilmetacrilato. VIPI com inclusão de nanopartícula obteve menor aderência de biofilme de Candida albicans. Conclusão:A nanopartícula de prata mostrou-se eficaz na sua ação de controle de Candida albicans e Staphylococcus aureus no método de imersão, entretanto, a sua ação antimicrobiana foi comprometida após inclusão nas resinas acrílicas.

Aim:To perform an in vitro evaluation of the activity of Staphylococcus aureus and Candida albicansin conventional prosthesis bases, based on methyl polymethylmethacrylate with silver nanoparticles incorporated into the composition. Methods: An experimental laboratory study was carried out using commercially available self-curing acrylic resins, Vipi Flash/VIPI and JET/Clássico. Eighty specimens were manufactured and divided into 16 groups (n = 5), referent to the resin brand, treatment (incorporation and immersion in the silver nanoparticle solution), and inoculated microorganism. The nanoparticles were synthesized with polymethacrylic acid and silver nitrate, and were irradiated with a low power (~ 8W) ultraviolet light for 6 hours. Their concentrations were idealized by the method of microplate dilution to determine the minimum inhibitory concentration when compared to the selected microorganisms. Bactericidal and fungicidal activities were identified with an initial concentration of 25% and a subsequent dilution factor of 12.5%. Results:It was difficult to incorporate the AgNPs into the acrylic resin, which may well have resulted from the change from the 3:1 proportion recommended by the manufacturer or by reducing or inactivating the action of the silver nanoparticle by interaction with polymethylmethacrylate. VIPI with the inclusion of nanoparticles obtained a lesser Candida albicans biofilm adherence. Conclusion: Silver nanoparticles were effective in controlling Candida albicans and Staphylococcus aureus in the immersion method; however, the antimicrobial activity was compromised after inclusion in acrylic resins.