Strong Interaction between Titanium Carbonitride Embedded in Mesoporous Carbon Nanofibers and Pt Enables Durable Oxygen Reduction.

Platinum (Pt) supported on high surface area carbon has been the most widely used electrocatalyst in proton exchange membrane fuel cell (PEMFC). However, conventional carbon supports are susceptible to corrosion at high potentials, leading to severe degradation of electrochemical performance. In this work, titanium carbonitride embedded in mesoporous carbon nanofibers (m-TiCN NFs) are reported as a promising alternative to address this issue. Benefiting from the interpenetrating conductive pathways inside the one-dimensional (1D) nanostructures and the embedded TiCN nanoparticles (NPs), m-TiCN NFs exhibit excellent stability at high potentials and interact strongly with Pt NPs. Subsequently, m-TiCN NFs-supported Pt NPs deliver remarkably enhanced oxygen reduction reaction (ORR) activity and durability, with negligible activity decay and less than 5% loss of electrochemical surface area（ECSA） after 50 000 cycles. Moreover, the fuel cell assembled by this catalyst delivers a maximum power density of 1.22 W cm-2 and merely 3% loss after 30 000 cycles of accelerated durability tests under U.S. Department of Energy (DOE) protocols. The improved ORR activity and durability are attributed to the superior corrosion resistance of the m-TiCN NF support and the strong interaction between Pt and m-TiCN NFs.

Hierarchically Interconnected 3D Catalyst Structure of Porous Multi-Metal Oxide Nanofibers for High-Performance Li-O2 Batteries.

Non-aqueous lithium-oxygen batteries (LOBs) have emerged as a promising candidate due to their high theoretical energy density and eco-friendly cathode reaction materials. However, LOBs still suffer from high overpotential and poor cycling stability resulting from difficulties in the decomposition of discharge reaction Li2O2 products. Here, a 3D open network catalyst structure is proposed based on highly-thin and porous multi-metal oxide nanofibers (MMONFs) developed by a facile electrospinning approach coupled with a heat treatment process. The developed hierarchically interconnected 3D porous MMONFs catalyst structure with high specific surface area and porosity shows the enhanced electrochemical reaction kinetics associated with Li2O2 formation and decomposition on the cathode surface during the charge and discharge processes. The uniquely assembled cathode materials with MMONFs exhibit excellent electrochemical performance with energy efficiency of 82% at a current density of 50 mA g-1 and a long-term cycling stability over 100 cycles at 200 mA g-1 with a cut-off capacity of 500 mAh g-1. Moreover, the optimized cathode materials exhibit a remarkable energy density of 1013 Wh kg-1 at the 100th discharge and charge cycle, which is nearly four times higher than that of C/NMC721, which has the highest energy density among the cathode materials currently used in electric vehicles.

A Porous Perovskite Nanofiber with Reinforced Aerophobicity for High-Performance Anion Exchange Membrane Water Splitting.

Perovskite oxides stand out as emerging oxygen evolution reaction (OER) catalysts on account of their effective electrocatalytic performance and low costs. Nevertheless, perovskite oxides suffer from severe bubble overpotential and inhibited electrochemical performance in large current densities due to their small specific surface areas and structural compactness. Herein, the study highlights the electrospun nickel-substituted La0.5 Sr0.5 FeO3-δ (LSF) porous perovskite nanofibers, that is, La0.5 Sr0.5 Fe1-x Nix O3-δ (denoted as ES-LSFN-x, x = 0, 0.1, 0.3, and 0.5), as high-performance OER electrocatalysts. The most effective La0.5 Sr0.5 Fe0.5 Ni0.5 O3-δ (ES-LSFN-0.5) nanofibers suggest a larger specific surface area, higher porosity, and faster mass transfer than the counterpart sample prepared by conventional sol-gel method (SG-LSFN-0.5), showing notably increased geometric and intrinsic activities. The bubble visualization results demonstrate that the enriched and nano-sized porosity of ES-LSFN-0.5 enables reinforced aerophobicity and rapid detachment of oxygen bubbles, thereby reducing the bubble overpotential and enhancing the electrochemical performance. As a result, the ES-LSFN-0.5-based anion exchange membrane water electrolysis delivers a superior stability of 100 h while the SG-LSFN-0.5 counterpart degrades rapidly within 20 h under a current density of 100 mA cm-2 . The results highlight the advantage of porous electrocatalysts in optimizing the performance of large current density water electrolysis devices by reducing the bubble overpotential.

Realizing High-Performance Lithium Storage by Fabricating FeTiO3 Nanoparticle-Impregnated Multichannel Carbon Nanofibers with Promoted Reaction Kinetics.

In this paper, a free-standing film of ilmenite FeTiO3 nanoparticle-impregnated porous multichannel N-doped carbon nanofibers (NF-FTO) is fabricated via electrospinning technology. The as-prepared NF-FTO film is highly flexible and can be tailored to a suitable size to assemble into lithium-ion batteries. The introduction of a conductive N-doped carbon matrix is conducive to the improvement of intrinsic electronic conductivity and the acceleration of Li+ diffusion kinetics. The construction of the porous structure and highly parallel channels facilitates the transfer of electrolyte to FTO particles through the pores and shortens the transport path of lithium ions. Thus, the self-supporting electrode yields an initial charge capacity of 718.5 mAh g-1 at 50 mA g-1, a high-rate performance of 410.4 mAh g-1 at 3 A g-1, and an outstanding cycling performance with no capacity decay after 1500 cycles at 3 A g-1. By ex situ X-ray diffraction and transmission electron microscopy analysis, the reaction mechanism of NF-FTO is determined as a reversible conversion reaction. Furthermore, the assembled LiFePO4/NF-FTO full cell delivers an initial discharge capacity of 521 mAh g-1 and superb rate performance.

Enzyme-responsive food packaging system based on pectin-coated poly (lactic acid) nanofiber films for controlled release of thymol.

Foodborne diseases caused by foodborne pathogens lead to serious harm to food safety and human health. This work fabricated an enzyme-responsive packaging film based on porous poly (lactic acid) (PLA) nanofibers modified by positively charged polyethyleneimine (PEI) and further to adsorb negatively charged pectin coating, which loaded with thymol (THY) for protecting fruits from microbial infection. The porous PLA nanofibers were fabricated by combining "Breath Figure" principle and electrospinning technique. The XPS and FTIR characterizations showed that PLA nanofiber membrane was successfully modified by PEI. The prepared nanofiber membrane significantly inhibited the growth of E. coli, S. aureus and Bacillus subtilis (＞95%), especially showed excellent antifungal activity against Aspergillus niger. The release of THY from pectin-coated porous nanofiber membrane (THY@PLA-PEI-Pectin) was triggered by pectinase, which was secreted by microorganisms from food contamination. Besides, the biocompatible THY@PLA-PEI-Pectin nanofiber membrane prolonged the shelf life of citrus. Therefore, this pectinase-responsive nanofiber membrane has desirable application prospects in the development of active or smart packaging systems.

Cobalt-Catalyzed Carbonization Incorporating Disordered Defects in Ordered Graphitic Domains for Fast and Ultrastable Potassium-Ion Battery.

Carbonaceous materials featuring both ordered graphitic structure and disordered defects hold great promise for high-performance K-ion batteries (KIBs) due to the concurrent advantages of high electronic conductivity, fast and reversible K+ intercalation/deintercalation, and abundant active K+ storage sites. However, it has been a lingering problem and remains a big challenge because graphitization and defects are intrinsic trade-off properties of carbonaceous materials. Herein, for the first time, we propose a cobalt-catalyzed carbonization strategy to fabricate porous carbon nanofibers that incorporate disordered defects in graphitic domain layers (PCNFs-DG) for fast and durable K+ storage. The Co catalyst not only ensures the formation of highly graphitized carbon shells around the Co particles but also introduces nanopores and doping defects in the following catalyst removal process. This idea of architecting defected-ordered graphitic carbon engineering guarantees fast reaction kinetics as well as structural stability with negligible interlayer expansion/contraction owing to the uncompromised electronic conductivity, expanded interlayer spacing, and regulated K+ storage mechanism. These appealing features translate to a high reversible capacity of 318.5 mAh g-1 at 100 mA g-1 and ultrahigh stability with almost 100% capacity retention over 2000 cycles in KIBs. This work puts in perspective that defected and ordered carbonaceous materials could be simultaneously achieved, advancing their performance for next-generation energy storage systems.

Preparation and Characterization of Highly Porous Polyacrylonitrile Electrospun Nanofibers Using Lignin as Soft Template via Selective Chemical Dissolution Technique.

In this study, polyacrylonitrile (PAN) was mixed with a renewable polymer, lignin, to produce electrospun nanofibers by using an electrospinning technique. Lignin was utilized as a soft template that was removed from the nanofibers by using a selective dissolution technique to create porous PAN nanofibers. These nanofibers were characterized with Fourier transform infrared (FTIR), field emission scanning electron microscopy (FESEM), thermogravimetry analysis (TGA), X-ray diffraction (XRD), and Brunauer-Emmett-Teller (BET) to study their properties and morphology. The results showed that lignin can be homogeneously mixed into the PAN solution and successfully electrospun into nanofibers. FESEM results showed a strong relationship between the PAN: lignin ratio and the diameter of the electrospun fibers. Lignin was successfully removed from electrospun nanofibers by a selective chemical dissolution technique, which resulted in roughness and porousness on the surface of the nanofibers. Based on the BET result, the specific surface area of the PAN/lignin nanofibers was more than doubled following the removal of lignin compared to PAN nanofibers. The highest specific surface area of nanofibers after selective chemical dissolution was found at an 8:2 ratio of PAN/lignin, which was 32.42 m2g-1 with an average pore diameter of 5.02 nm. The diameter of electrospun nanofibers was also slightly reduced after selective chemical dissolution. Porous PAN nanofibers can be seen as the precursors to the production of highly porous carbon nanofibers.

Antibacterial Porous Coaxial Drug-Carrying Nanofibers for Sustained Drug-Releasing Applications.

The phenomenon of drug burst release is the main problem in the field of drug delivery systems, as it means that a good therapeutic effect cannot be acheived. Nanofibers developed by electrospinning technology have large specific surface areas, high porosity, and easily controlled morphology. They are being considered as potential carriers for sustained drug release. In this paper, we obtained polycaprolactone (PCL)/polylactic acid (PLA) core-shell porous drug-carrying nanofibers by using coaxial electrospinning technology and the nonsolvent-induced phase separation method. Roxithromycin (ROX), a kind of antibacterial agent, was encapsulated in the core layer. The morphology, composition, and thermal properties of the resultant nanofibers were characterized by scanning electron microscopy (SEM), attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy, differential scanning calorimetry (DSC) and thermogravimetry analysis (TGA). Besides this, the in vitro drug release profile was investigated; it showed that the release rate of the prepared coaxial porous nanofibers with two different pore sizes was 30.10 ± 3.51% and 35.04 ± 1.98% in the first 30 min, and became 92.66 ± 3.13% and 88.94 ± 1.58% after 14 days. Compared with the coaxial nonporous nanofibers and nanofibers prepared by uniaxial electrospinning with or without pores, the prepared coaxial porous nanofibers revealed that the burst release was mitigated and the dissolution rate of the hydrophobic drugs was increased. The further antimicrobial activity demonstrated that the inhibition zone diameter of the coaxial nanofibers with two different pore sizes was 1.70 ± 0.10 cm and 1.73 ± 0.23 cm, exhibiting a good antibacterial effect against Staphylococcus aureus. Therefore, the prepared nanofibers with the coaxial porous structures could serve as promising drug delivery systems.

Structure and electrochemical performance of electrospun-ordered porous carbon/graphene composite nanofibers.

Ordered carbon/graphene composite nanofibers (CGCNFs) with different porous configurations were used as a material to fabricate supercapacitor electrodes. These nanofibers were synthesized by applying a modified parallel electrode to the electrospinning method (MPEM) in order to generate electrospun polyacrylonitrile (PAN) nanofibers containing graphene. After synthesis, these fibers were submitted to carbonization under a N2 atmosphere at 1100 °C. The influence of the ordering and porosity of CGCNFs on their electrochemical performance was studied. The results showed that by adding deionized water to the spinning solution one could increase the number of mesopores and the specific surface area of CGCNFs, thereby significantly increasing their specific capacitance. In addition, the ordering of CGCNFs within the electrode improved the electron transfer efficiency, resulting in a higher specific capacitance.

Hierarchically Structured Porous Piezoelectric Polymer Nanofibers for Energy Harvesting.

Hierarchically porous piezoelectric polymer nanofibers are prepared through precise control over the thermodynamics and kinetics of liquid-liquid phase separation of nonsolvent (water) in poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)) solution. Hierarchy is achieved by fabricating fibers with pores only on the surface of the fiber, or pores only inside the fiber with a closed surface, or pores that are homogeneously distributed in both the volume and surface of the nanofiber. For the fabrication of hierarchically porous nanofibers, guidelines are formulated. A detailed experimental and simulation study of the influence of different porosities on the electrical output of piezoelectric nanogenerators is presented. It is shown that bulk porosity significantly increases the power output of the comprising nanogenerator, whereas surface porosity deteriorates electrical performance. Finite element method simulations attribute the better performance to increased volumetric strain in bulk porous nanofibers.

Fabrication of Hollow and Porous Tin-Doped Indium Oxide Nanofibers and Microtubes via a Gas Jet Fiber Spinning Process.

We report the morphologies of tin-doped indium oxide (ITO) hollow microtubes and porous nanofibers produced from precursor solutions of polyvinylpyrrolidone (PVP), indium chloride (InCl3), and stannic chloride (SnCl4). The polymer precursor fibers are produced via a facile gas jet fiber (GJF) spinning process and subsequently calcined to produce ITO materials. The morphology shows strong dependence on heating rate in calcination step. Solid porous ITO nanofibers result from slow heating rates while hollow tubular ITO microfibers with porous shells are produced at high heating rates when calcined at a peak temperature of 700 °C. The mechanisms of formation of different morphological forms are proposed. The ITO fibers are characterized using several microscopy tools and thermogravimetric analysis. The concentration of inorganic salts in precursor solution is identified as a key factor in determining the porosity of the shell in hollow fibers. The data presented in this paper show that GJF method may be suitable for fabrication of hollow and multi-tubular metal oxide nanofibers from other inorganic precursor materials.

Amino-Functionalized Porous Nanofibrous Membranes for Simultaneous Removal of Oil and Heavy-Metal Ions from Wastewater.

Both oil spill and heavy-metal ions in the industrial wastewater cause severe problems for aquatic ecosystem and human health. In the present work, the electrospun superamphiphilic SiO2-TiO2 porous nanofibrous membranes (STPNMs) comprised of intrafiber mesopores and interfiber macropores are modified by an amino-silanization reaction, which affords the membrane (ASTPNMs) the ability to simultaneously remove the oil contaminants and the water-soluble heavy-metal ions from wastewater. The underwater superoleophobicity of ASTPNMs facilitates the highly efficient separation of water and various oils, even emulsifier-stabilized emulsion. Meanwhile, an optimal modification time (15 min, ASTPNM-15) is important for maintaining the under-oil superhydrophilicity of the membrane, based on which the oil contaminant in membrane can be easily cleaned by water alone, showing excellent self-cleaning performance. The adsorption of Pb2+ over ASTPNM-15 reaches equilibrium at around 20 min, and the monolayer adsorption capacity is 142.86 mg g-1 at pH = 5 at 20 °C. In the breakthrough processes, the permeation volume of ASTPNM-15 for the purification of Pb2+ (5 ppm, pH = 5) reaches 160 mL when the concentration of Pb2+ in the filtrate increases to 0.05 ppm. The separation efficiencies of ASTPNM-15 for simulated wastewater containing both oil spill and various heavy-metal ions (Pb2+, Cr3+, Ni2+) are larger than 99.5%. In addition, the separation capacity keeps stable over five purification-regeneration cycles without obvious decrease, proving excellent recyclability and reusability of ASTPNM-15 for practical applications.

A Fast Humidity Sensor Based on Li⁺-Doped SnO2 One-Dimensional Porous Nanofibers.

One-dimensional SnO2- and Li⁺-doped SnO2 porous nanofibers were easily fabricated via electrospinning and a subsequent calcination procedure for ultrafast humidity sensing. Different Li dopant concentrations were introduced to investigate the dopant's role in sensing performance. The response properties were studied under different relative humidity levels by both statistic and dynamic tests. The best response was obtained with respect to the optimal doping of Li⁺ into SnO2 porous nanofibers with a maximum 15 times higher response than that of pristine SnO2 porous nanofibers, at a relative humidity level of 85%. Most importantly, the ultrafast response and recovery time within 1 s was also obtained with the 1.0 wt % doping of Li⁺ into SnO2 porous nanofibers at 5 V and at room temperature, benefiting from the co-contributions of Li-doping and the one-dimensional porous structure. This work provides an effective method of developing ultrafast sensors for practical applications-especially fast breathing sensors.

Porous Ga-In Bimetallic Oxide Nanofibers with Controllable Structures for Ultrasensitive and Selective Detection of Formaldehyde.

The design of appropriate composite materials with unique surface structures is an important strategy to achieve ideal chemical gas sensing. In this paper, efficient and selective detection of formaldehyde vapor has been realized by a gas sensor based on porous GaxIn2-xO3 nanofibers assembled by small building blocks. By tuning the Ga/In atomic ratios in the materials, crystallite phase, nanostructure, and band gap of as-obtained GaxIn2-xO3 nanofibers can be rationally altered. This further offers a good opportunity to optimize the gas sensing performances. In particular, the sensor based on porous Ga0.6In1.4O3 nanofibers assembled by small nanoparticles (∼4.6 nm) exhibits best sensing performances. Toward 100 ppm formaldehyde, its highest response (Ra/Rg = 52.4, at 150 °C) is ∼4 times higher than that of the pure In2O3 (Ra/Rg = 13.0, at 200 °C). Meanwhile, it has superior ability to selectively detect formaldehyde against other interfering volatile organic compound gases. The significantly improved sensing performance makes the Ga0.6In1.4O3 sensor very promising for selective detection of formaldehyde.

High photocatalytic activity of V-doped SrTiO3 porous nanofibers produced from a combined electrospinning and thermal diffusion process.

In this letter, we report a novel V-doped SrTiO3 photocatalyst synthesized via electrospinning followed by a thermal diffusion process at low temperature. The morphological and crystalline structural investigations reveal not only that the V-doped SrTiO3 photocatalyst possesses a uniform, porous, fibrous structure, but also that some V(5+) ions are introduced into the SrTiO3 lattice. The photocatalytic capability of V-doped SrTiO3 porous nanofibers was evaluated through photodegrading methyl orange (MO) in aqueous solution under artificial UV-vis light. The results indicated that V-doped SrTiO3 porous nanofibers have excellent catalytic efficiency. Furthermore, the excellent catalytic activity was maintained even after five cycle tests, indicating that they have outstanding photocatalytic endurance. It is suggested that the excellent photocatalytic performance of doped SrTiO3 nanofibers is possibly attributed to the V(5+) ion doping increasing the light utilization as well as to the outstanding porous features, the excellent component and structure stability.