[Subtuberosity anterior closing wedge osteotomy to correct the increased posterior slope of the tibial plateau]. / Subtuberositäre anterior schließende Osteotomie zur Korrektur der erhöhten posterioren Reklination des Tibiaplateaus.

OBJECTIVE: Reduction of increased reclination of the tibial plateau (posterior slope) to improve the anterior stability of the knee joint. INDICATIONS: Increased posterior reclination of the tibial plateau greater than 12° in combination with recurrent instability after anterior cruciate ligament (ACL) reconstruction. CONTRAINDICATIONS: Hyperextension of more than 15° (relative). SURGICAL TECHNIQUE: Anterior skin incision approximately 8-10 cm above the tibial tuberosity. Insertion of two converging guidewires directly below the patellar tendon ending obliquely in the area of the posterior cruciate ligament (PCL) insertion. Control of the wire position with the image intensifier core. Oscillating saw osteotomy. Removal of the wedge and closure of the osteotomy. Osteosynthesis with interfragmentary screw and medial angle-stable plate. POSTOPERATIVE MANAGEMENT: Partial load with 10-20 kg for 2 weeks, then step by step increase in load. Mobility: free. RESULTS: To date we have operated on 36 patients with recurrent instability after ACL reconstruction (20 men, 16 women, average age 34.4 years) in the manner described in this article. In 25 cases, enlarged bone tunnels were filled with allogeneic bone at the same time. The posterior slope of the tibial plateau could be reduced from an average of 14.5° to 8.8°. In 28 cases another ACL reconstruction was performed after an interval of 4-12 months. The Lysholm score significantly increased from 76.3 points to 89.2 points.

How to Choose the Appropriate Posterior Slope Angle Can Lead to Good Knee Joint Function Recovery in Total Knee Arthroplasty?

Objective: In this study, we aim to examine the effects of osteotomy under varying posterior slope angles on knee joint function recovery following knee arthroplasty. Methods: We conducted a retrospective analysis from September 2015 to September 2018 on 240 patients who underwent knee arthroplasty three years previously. The study participants were categorized based on changes in the angle of the posterior slope before and after surgery: Group 1, > 5°; Group 2, 3°-5°; Group 3, 0°-3°; Group 4, -3°-0°; Group 5, < -3°. All participants were affected with knee osteoarthritis. The Knee Society Clinical Rating System (KSS) knee function score, Western Ontario and McMaster Universities Arthritis Index (WOMAC) knee function score, Visual Analogue Scale (VAS) pain score, and postoperative complications were measured 3 years after surgery. Results: The level of pain experienced by the patients decreased significantly than before, with pain scores ranging from 1.0-3.0, and there was a statistical difference between groups (H = 93.400, P < 0.001). The KSS score increased, with group 5 having the lowest median score of 78.0 and group 2 having the highest median score of 97.0, and there was a statistical difference between groups (H = 164.460, P < 0.001). The WOMAC score was reduced, with the median score being 24.0, 11.0, 14.0, 20.0, and 26.0, in the five groups, respectively. Group 5 had the highest score, while Group 2 had the lowest score, and there was a statistically significant difference between groups (H = 164.223, P < 0.001). No symptoms such as periprosthetic femoral fracture, prosthetic loosening, or pad wear were detected in patients postoperatively. Conclusion: Osteotomy at various posterior slope angles in total knee arthroplasty impacts postoperative knee function rehabilitation. An excessive increase or decrease in angle can have an impact on the postoperative recovery of knee function.

Sexual dimorphism of the posterior condylar offset of the femur and the medial posterior slope of the tibia in non-arthritic knees of Egyptian adults: an MRI study.

BACKGROUND: The aim of this magnetic resonance imaging (MRI) study was to investigate controversial sexual dimorphism of the posterior condylar offset of the femur (the offset) and the posterior slope of the tibia (the slope) in non-arthritic knees of Egyptian adults. METHODS: On 100 male and 100 female MRIs of non-arthritic knees, linear measurements of the distal part of the femur (the offset) and the angular measurements of the proximal part of the tibia (the slope) were performed and compared regarding sex and ethnicity. The intraclass correlation coefficient (ICC) was used to test the interrater agreement. RESULTS: Both offsets and the lateral offset ratio were larger in males (p < 0.001), the medial offset ratio, and the medial slope in females (p from < 0.001 to 0.007), whereas the lateral slope was sex-free (p = 0.41). Irrespective of sex, however, the medial offset with its ratio, and the medial slope were larger than their counterparts (p < 0.001). Our means of the offsets, their ratios, and the slopes mostly differed from those of other ethnicities (p from ≤ 0.001 to 0.004). ICCs > 0.8 proved MRI's precision was high. CONCLUSION: There was a sexual dimorphism of both the offset and the medial slope in non-arthritic knees of Egyptian adults. We believe future designs of knee implants should consider these differences in order to improve postoperative range of motion and patients' satisfaction after total knee arthroplasty. Level of evidence Level III Retrospective Cohort Study. Trial registration ClinicalTrials.gov identifier: NCT03622034, registered on July 28, 2018.

Distribution and Organization of Descending Neurons in the Brain of Adult Helicoverpa armigera (Insecta).

The descending neurons (DNs) of insects connect the brain and thoracic ganglia and play a key role in controlling insect behaviors. Here, a comprehensive investigation of the distribution and organization of the DNs in the brain of Helicoverpa armigera (Hübner) was made by using backfilling from the neck connective combined with immunostaining techniques. The maximum number of DN somata labeled in H. armigera was about 980 in males and 840 in females, indicating a sexual difference in DNs. All somata of DNs in H. armigera were classified into six different clusters, and the cluster of DNd was only found in males. The processes of stained neurons in H. armigera were mainly found in the ventral central brain, including in the posterior slope, ventral lateral protocerebrum, lateral accessory lobe, antennal mechanosensory and motor center, gnathal ganglion and other small periesophageal neuropils. These results indicate that the posterior ventral part of the brain is vital for regulating locomotion in insects. These findings provide a detailed description of DNs in the brain that could contribute to investigations on the neural mechanism of moth behaviors.

[Analysis of the influence of tibial component posterior slope angle on short- and mid-term effectiveness of unicompartmental knee arthroplasty].

OBJECTIVE: To investigate the influence of tibial component posterior slope angle (TCPSA) on the short- and mid-term effectiveness of unicompartmental knee arthroplasty (UKA). METHODS: The clinical data of the patients with anterior medial knee osteoarthritis (KOA) treated by UKA between May 2014 and May 2019 were retrospectively analysed. There were 10 males and 45 females with a median age of 68 years (range, 49-83 years). The body mass index (BMI) was 27.63-52.26 kg/m 2, with an average of 40.04 kg/m 2. There were 28 cases of left knee, 21 cases of right knee, and 6 cases of double knees. The disease duration was from 7 months to 12 years, with an average of 4.33 years. Measurements of posterior tibial slope (PTS) and TCPSA were performed on the knee joint X-ray films of patients before operation and at last follow-up, respectively. According to the postoperative TCPSA, patients were divided into TCPSA<4° group (group A), 4°≤TCPSA<9° group (group B), and TCPSA>9° group (group C) with the quartile method. Baseline data such as age, gender, BMI, and affected side were compared among the 3 groups, as well as the Hospital for Special Surgery (HSS) score, visual analogue scale (VAS) score, and range of motion (ROM) before and after operation. RESULTS: All 55 patients were followed up 17-72 months, with an average of 36 months. No complication such as prosthesis loosening, infection, tibial plateau collapse, and dislocation of the meniscus pad occurred. The preoperative PTS was (7.38±3.37)°, and the postoperative TCPSA was (6.25±3.22)°, showing no significant difference ( t=1.815, P=0.074). According to postoperative TCPSA, there were 12 knees in group A, 32 in group B, and 17 in group C. There was no significant difference in age, gender, BMI, affected side, and preoperative HSS scores, ROM, and VAS scores among the 3 groups ( P>0.05). At last follow-up, the HSS scores, ROM, and VAS scores of the 3 groups significantly improved when compared with preoperative ones ( P<0.05). There was no significant difference in the difference of the above indicators before and after operation among 3 groups ( P>0.05). CONCLUSION: The patients with anterior medial KOA may have good short- and mid-term effectiveness after UKA. Among the recommended range of TCPSA, there is no significant influence on the postoperative short- and mid-term effectiveness. Long-term effectiveness need to extend the follow-up time and expand the sample size for research verification.

Relevance of the Tibial Slope on Functional Outcomes in ACL-Deficient and ACL Intact Fixed-Bearing Medial Unicompartmental Knee Arthroplasty.

BACKGROUND: Excessive posterior tibial slope in medial unicompartmental knee arthroplasty (UKA) has been implicated in early failure. The purpose of this study was to evaluate the relationship between preoperative posterior tibial slope and postoperative slope of the implant (PSI) on outcomes in patients with anterior cruciate ligament (ACL) intact and ACL-deficient knees after fixed-bearing medial UKA. METHODS: Patients who underwent a medial UKA between 2002 and 2017 with a minimum 3-year follow-up were included. Preoperative posterior tibial slope and postoperative PSI were measured. Outcomes measures included Knee Injury and Osteoarthritis Outcomes Score (KOOS) subscales, Lysholm, and VR-12. Failure was defined as conversion to total knee arthroplasty. RESULTS: Of 241 knees undergoing UKA, 131 patients (70 women, 61 men; average age of 65 ± 10 years (average BMI of 27.9 ± 4) were included. For all patients, survivorship was 98% at 5 years and 96% at 10 years with a mean survival time for UKA was 15.2 years [95% CI: 14.6-15.7]. No failure had a PSI >7°. There were no superficial or deep infections. There were no significant differences in outcome scores between the ACL intact and the ACL-deficient group; therefore, the data were combined for analysis. At mean 8-year follow-up, KOOS pain scores were better in patients with PSI ≤7° (87 ± 16) than those with PSI >7° (81 ± 15). 76% of patients with PSI ≤7° reached the Patient Acceptable Symptom State for KOOS pain; whereas, 59% of patients with PSI >7° reached PASS for KOOS pain (P = .015). CONCLUSION: Patients with postoperative posterior slope of the tibial implant >7° had significantly worse postoperative pain, without conversion to TKA, and with maintenance of high function. In ACL deficient and intact knees, nonrobotically-assisted, fixed-bearing medial UKA had a 96% survivorship at 10 years.

The effect of the sagittal plane osteotomy inclination on the posterior tibial slope in medial open wedge HTO: experimental study with a square column model.

BACKGROUND: Medial open-wedge high tibial osteotomy (HTO) is an effective and safe treatment method for medial osteoarthritis of the knee. However, unintended changes in the posterior tibial slope (PTS) may occur. Several factors cause PTS alterations after medial open-wedge HTO; however, research on sagittal-plane osteotomy inclination (SPOI) in relation to the PTS is sparse. The purpose of this study was to evaluate whether the SPOI affects changes in the PTS after medial open-wedge HTO. The hypothesis was that an SPOI parallel to the PTS causes no change in the PTS after medial open-wedge HTO. METHODS: A square column model with a 10° posterior slope was produced using two three-dimensional (3D) programs and a 3D printer. Then, a series of medial open-wedge HTO procedures was performed on the square column model through virtual simulation using the two 3D programs, and an actual simulation was conducted using a 3D printer, a testing machine and a measurement system. The SPOI was divided into four types: ① SPOI 20° (posterior-inclined 10° osteotomy), ② SPOI 10° (osteotomy parallel to posterior slope), ③ SPOI 0° (anterior-inclined 10° osteotomy), and ④ SPOI - 10° (anterior-inclined 20° osteotomy). The correction angle was increased at intervals of 5° from 0° to 30°. The change in posterior slope was measured in the sagittal plane. RESULTS: The posterior slope was increased in SPOI 20° (posterior-inclined 10° osteotomy), maintained in SPOI 10° (osteotomy parallel to posterior slope), and decreased in SPOI 0° (anterior-inclined 10° osteotomy) and SPOI - 10° (anterior-inclined 20° osteotomy) based on the correction angle. CONCLUSIONS: In this study using a square column model, the SPOI affected the change in the PTS, and an SPOI parallel to the PTS caused no change in the PTS after medial open-wedge HTO.

Effects of Different Posterior Tibial Slopes in Unicompartmental Knee Arthroplasty on the Wear and Function of Prosthesis / 医用生物力学

Objective To establish the three-dimensional (3D) finite element model of unicompartmental knee arthroplasty (UKA) with 3° and 7° posterior tibial slope at different knee flexion angles, and to study biomechanical properties and prosthetic wear of the knee joints with two types of posterior tibia slope and their effects on knee function. Methods Combining CT and MRI images of human knee joints with the 3rd-generation Oxford prosthesis, the finite element UKA model with 3° and 7° posterior tibia slope were established. The 1 kN load was applied to center point of the medial and lateral condyles of the femur to simulate the standing load of human body. The maximum stresses and distributions of the prosthesis and articular cartilage at different knee flexion angles were analyzed. ResultsThe maximum stress of the meniscus liner with 3° posterior tibia slope at 0°, 30°, 60°, 90°, 120° knee flexion angles increased by 28.06%, 68.99%, 19.45%, 21.06% and 53.38%, the distribution area was concentrated from the side of the meniscus liner to the central area, and the stress concentration was obvious at 120° knee flexion. The maximum stress of prosthesis with 3° posterior tibia slope was greater than that with 7 ° posterior tibia slope. The expansion of stress concentration area would cause wear and loosening of the prosthesis, contact stress and concentration area of the articular cartilage would subsequently increase with posterior tibia slope increasing, and stress concentration would be more obvious at high knee flexion angles. Conclusions Tibial prosthesis has the higher stress and greater wear under the condition of 3° posterior tibia slope than 7° posterior tibia slope. The research findings provide theoretical basis for the UKA design in clinic.

The posterior tibial slope is mainly created by the posterior rotation of the tibial condyles.

PURPOSE: Constitutional varus in the coronal plane is formed based on the Hueter-Volkmann's law. The varus deformity occurs at the proximal metaphysis of the tibia and the tibial condyle rotates medially. In the sagittal plane, we hypothesized that the posterior slope angle of the tibial articular surface may also occur at the proximal metaphysis and the tibial condyle rotates posteriorly. The purpose of this study was to verify the hypothesis. METHODS: A total of 208 patients who underwent TKA had lateral view proximal tibia digital radiograph on which seven parameters were analyzed. The posterior slope angle of the tibial articular surface relative to the anterior wall of the tibial condyle and that relative to the anterior cortex of the tibial shaft were assessed. Correlation between the position of the tibial condyle and the posterior slope angle of the articular surface were assessed. RESULTS: The proximal tibial condyle itself did not have a posterior slope in the 86.5% of the participants. Posterior rotation of the tibial condyle created posterior slope of the tibial articular surface relative to the anterior cortex of the tibial shaft. The more tibial condyle was posteriorly rotated, the more the tibial articular surface shifted posteriorly. CONCLUSION: Study findings showed that the posterior tibial slope occurs at the proximal metaphysis of the tibia, and the tibial condyle rotates posteriorly. The posterior tibial slope involves the posterior shift of the tibial articular surface. The posterior tibial slope is mainly created by the posterior rotation of the tibial condyle.

Extent of in vivo sagittal bearing movement and its relationship with tibial posterior slopes in Oxford mobile-bearing unicompartmental knee arthroplasty.

BACKGROUND: The effect of increased tibial slope on the bearing movement and clinical results in mobile-bearing unicompartmental knee arthroplasty has not been well discussed. We aimed to clarify the extent of in vivo sagittal bearing movement and bearing overhang using fluoroscopy and their relationship with the tibial posterior slopes and clinical results. METHODS: This retrospective study included 40 patients who underwent Oxford unicompartmental knee arthroplasty for anteromedial osteoarthritis or osteonecrosis of the knee. Intraoperative posterior translation and posterior overhang of the bearing were assessed during flexion. The tibial posterior slopes were evaluated before and 2 weeks after surgery, and its increment was recorded. Clinical evaluations were also performed preoperatively and at 2 years postoperatively (maximum flexion angle, Oxford Knee Score). Single linear regression analysis was performed to assess the correlation between the tibial posterior slopes and the posterior translation and the posterior overhang and determine if these could affect the clinical outcomes. FINDINGS: The average posterior translation was 10.7 ± 4.3 mm, and posterior overhang of the mobile bearing was found in 35% of overall patients. They were associated with increased tibial slope as well as poorer improvement in Oxford Knee Score at 2 years postoperatively. INTERPRETATION: In Oxford unicompartmental knee arthroplasty, mobile bearing can probably move posteriorly beyond the posterior margin of the tibial component during flexion when the tibial posterior slope increases more than the original magnitude. Additionally, the posterior translation and posterior overhang closely correlated with the poorer improvement in Oxford Knee Score at 2 years postoperatively.

Clinical features and treatment of "Non-dislocated hyperextension tibial plateau fracture".

BACKGROUND: To explore the epidemiological characteristics, clinical characteristics, treatment strategies, and clinical results of non-dislocated hyperextension tibial plateau fracture. METHOD: A total of 25 cases of non-dislocated hyperextension tibial plateau fracture patients were collected (12 males and 13 females), aged 27-79 years. Preoperative tibial plateau posterior slope angle was - 10~0° (average - 5.2°). Preoperative MRI showed 5 cases of MCL injury, 3 cases of PLC complex injury, and 2 cases of PLC + PCL injury. The change of tibial plateau posterior slope angle was more than 10° in patients with ligament injury, and the patients with a tibial plateau posterior slope angle change less than 10° had no ligament injury; 6 patients with simple column fracture had a ligament injury, 2 patients with bilateral column fracture had a ligament injury, and 2 patients with three column fracture had a ligament injury. RESULTS: Patients were followed up for 12-24 months (average 16.4 months). The operative time was 65-180 min (average 124 min), and the blood loss was 20-200 ml (average 106 ml). The plate was placed on the anterior part of tibial plateau. Evaluation of postoperative fracture reduction was as follows: 20 cases reached anatomic reduction, 5 cases reached good reduction (between 2 and 5 mm articular surface collapse), and the excellent rate of fracture reduction was 100%. The fracture healing time was 3-6 months (average 3.3 months). The postoperative knee Rasmussen score was 18-29 (average 24.9), and the postoperative knee joint mobility was 90-130° (average 118°). Two patients suffered superficial infection. CONCLUSIONS: The main imaging characteristic of "non-dislocated hyperextension tibial plateau fracture" is the change of tibial plateau posterior slope angle. The injury of single anteromedial column/anterolateral column fracture is easy to combine with "diagonal" injury, and when the tPSA changes more than 10°, it is easy to be combined with ligament injury. By reducing the joint articular surface and lower limb force line, repairing the soft tissue structure, and reconstructing the knee joint stability, we can get satisfactory results. TRIAL REGISTRATION: It was a retrospective study. This study was consistent with the ethical standards of the Second Affiliated Hospital of Zhejiang University Medical College and was approved by the hospital ethics committee and the trial registration number of our hospital was 20180145 .

[Radiological analysis of sagittal and torsional changes in the tibia following a medial open wedge high tibial osteotomy].

Objective: To investigate the sagittal and torsional changes in the tibia after a medial open wedge high tibial osteotomy (OWHTO) and their correlation with the corrective angle of proximal tibial coronal plane. Methods: A prospective analysis was conducted on patients who underwent OWHTO at Department of Orthopaedic Surgery, Beijing Chaoyang Emergency Medical Center from March 2019 to July 2019.The operation were performed by the same surgeon. X-ray and CT were performed before and 3 days after the operation. The mechanical axis angle (mFTA), medial proximal tibial angle (MPTA), posterior tibial slope (PTS) and tibial torsion angle (TTA) were measured and compared by paired t-test. Pearson correlation coefficient was used to analyze the correlation between the changes of PTS and TTA and the correction angle of MPTA. Results: A total of 13 patients (19 knees) were recruited. There were 9 males (13 knees) and 4 females (6 knees), aged (39.4±14.4) years (range:20 to 60 years). The mFTA improved from (8.1±2.8) degrees preoperatively to (-1.4±1.6) degrees postoperatively (t=14.819, P=0.000). The MPTA was changed from (81.1±2.4) degrees pre-operatively to (90.4±3.4) degrees postoperatively (t=-15.579, P=0.000). The PTS decreased from (79.6±3.2) degrees to (76.8±3.1) degrees (t=9.709, P=0.000). The differences of mFTA, MPTA and PTS were statistically significant. There was no significant difference in TTA between before and after operation ((28.2±1.5) ° vs. (27.3±6.3) °,t=1.925, P=0.070). There was no correlation between the correction angle of MPTA and the change of PTS and TTA (r=0.384, P=0.105; r=0.321, P=0.181). Conclusions: Even if the intra-operative measures were used to control tibial slope, the PTS still increased significantly after OWHTO, while the TTA has no significant change. No correlation was seen between the change of sagittal and torsional and the corrective angle of proximal tibial coronal plane.

A computer simulation study for preserving the tibial posterior slope in open-wedge high tibial osteotomy.

OBJECTIVE: To measure the medial opening gap and examine a technique for preserving the tibial posterior slope (TPS) in open-wedge high tibial osteotomy (OWHTO) using computer-simulated three-dimensional (3D) surgery. MATERIALS AND METHODS: This study included 24 symptomatic knees from 20 patients (7 men and 13 women; mean age, 67.9 years; range 54-89 years). Digital imaging and communications from computed tomography examination were applied to a 3D picture software program, and several anatomical landmarks were registered. Then, computer simulation of OWHTO as a virtual surgery was performed: the correction angle was decided to make the femorotibial angle 170°, and the TPS did not differ between pre- and postplanification. The distance between the proximal and distal cortices of the medial tibia was measured at three points, which were the anterior (AD), posterior (PD), and longest (LD) distance sites in the sagittal plane, using the 3D view, and the ratios of AD/PD and AD/LD were measured. The anteromedial opening gap was compared to the posteromedial gap and the longest distance gap at the osteotomy site. Spearman's rank correlation coefficient test was used in statistical analysis. RESULTS: Mean AD/PD was 0.740 ± 0.051 (range 0.651-0.850), and mean AD/LD was 0.652 ± 0.040 (range 0.571-0.768). The correction angle was not associated with the values of both AD/PD and AD/LD. CONCLUSIONS: Difference in AD/PD and AD/LD between each patient was regarded as a significant variation. Therefore, preoperative planification with 3D computer simulation to measure AD/PD and AD/LD may be helpful to avoid a significant increase in TPS.

Analyzing risk factors for recurrence of developmental coxa vara after surgery.

PURPOSE: To evaluate the risk factors for developmental coxa vara (DCV) recurrence following valgus osteotomy of the proximal femur. METHODS: We retrospectively reviewed records of 32 DCV patients (46 hips) treated surgically (2005 to 2012). Recurrence-related factors, including age at initial surgery, side, sex, fixation methods, diagnosis of coxa vara, premature capital femoral physeal closure and postoperative Hilgenreiner epiphyseal (HE) angle, head-shaft (HS) angle, medial femoral offset and posterior slope angle (PSA) were analyzed. RESULTS: At 4.7-year mean follow-up, 12 hip deformities recurred (26%). Postoperative HE angle > 41° and negative offset were statistically significant univariate and multivariate risk factors for the deformity recurrence. Increased PSA was common preoperatively, which accounted for 59% of hips. Postoperative PSA > 20° was associated with a high recurrence rate in the univariate analysis. Age was another univariate risk factor for the recurrence. Recurrence rate was 52% in the < 6.5-year age group versus 4% in the > 6.5-year age group. Other factors were not statistically significantly related to recurrence. CONCLUSION: DCV is a 3D deformity. To prevent recurrence, HE angle should be restored to < 41° in the coronal plane. Sagittal malalignment (abnormal PSA) should be corrected concurrently, so that, the direction of surgical correction is along the true deformity plane. During valgus osteotomy, the distal fragment should be lateralized to maintain a normal mechanical axis. LEVEL OF EVIDENCE: IV.

MRI in idiopathic, stable, slipped capital femoral epiphysis: evaluation of contralateral pre-slip.

PURPOSE: Early diagnosis and treatment of slipped capital femoral epiphysis (SCFE) is important to prevent slip progression and avoid complications. We sought to determine if MRI findings in patients with unilateral SCFE could indicate 'pre-slip' or predict future SCFE in the contralateral hip. METHODS: A prospective study evaluated patients with unilateral SCFE over a two-year period. MRI of the asymptomatic hip was performed within the perioperative period. Patients were followed with radiographs until a contralateral slip occurred or until physeal closure. Demographics, clinical stability, severity, posterior slope angle (PSA), modified Oxford Bone Score (mOBS) and patency of the triradiate cartilage were recorded and statistical analysis performed. RESULTS: In all, 33 of 54 patients with unilateral SCFE were enrolled into the study. In all, 29 (87.8%) had complete follow-up. Five of the enrolled patients (15.2%) developed a sequential slip requiring in situ pinning. Six of 33 (18.2%) patients had positive MRI findings: four of which proceeded to sequential SCFE and two which did not. One sequential slip had a negative MRI. PSA predicted 1/11 sequential slips (sensitivity 9.09%, specificity 81.4%, positive predictive value (PPV) 11.1%, negative predictive value (NPV) 77.8%) and mOBS predicted 5/11 sequential slips (sensitivity 45.5%, specificity 93%, PPV 62.5%, NPV 87%). An open triradiate cartilage was present in 8/11 patients with sequential slips (sensitivity 72.7%, specificity 81.4%, PPV 50%, NPV 92.1%). CONCLUSION: MRI findings consistent with 'pre-slip' were present in 66.7% of patients who developed a sequential SCFE. Further study on the utility/sensitivity of MRI in predicting sequential SCFE is warranted. LEVEL OF EVIDENCE: II, diagnostic.

Should sagittal osteotomy line be parallel to tibial posterior slope in high tibial osteotomy?

BACKGROUND: The reason why the osteotomy line in the sagittal view should be parallel to the medial tibial posterior slope in open wedge high tibial osteotomy (OWHTO) remains unclear. In addition, previous study reported that a posterolateral hinge position led to an increase in tibial posterior slope (TPS) after OWHTO. Our aims were to examine the relationships between angles among the tibial plateau and osteotomy planes or the hinge point and the change in TPS, and the location of the hinge position after OWHTO using three-dimensional computed tomography (3DCT). We hypothesized that the sagittal angle between the tibial plateau and osteotomy planes with an anterior-widening proximal tibial fragment resulted in increased TPS, and the hinge position located posterolaterally. METHODS: Preoperative planning anticipated a weight-bearing line ratio of 62% on the radiograph. The anterior gap was 67% of the posterior gap in OWHTO. We identified the tibial plateau and upper and lower osteotomy planes on 3DCT of 82 patients with symptomatic medial osteoarthritic knee after OWHTO. The osteotomy plane angles between the tibial plateau and upper osteotomy planes, and opening gap angles between both osteotomy planes in the coronal and sagittal views were measured. The anteroposterior (AP) and lateral hinge position was displayed as a percentage on the upper osteotomy plane. We assessed the relationships among them. RESULTS: The TPS significantly increased after OWHTO (p = 0.002). There was no significant difference between the sagittal osteotomy plane angle and the change in TPS. The sagittal opening gap angle and the AP hinge position ratio were significantly correlated with the change in the TPS (r = 0.477 p < 0.001 and r = - 0.342, p = 0.002, respectively). The hinge position was located a mean of 16.0% from the lateral and 48.6% from the posterior tibial edge in the upper osteotomy plane. CONCLUSIONS: Contrary to our expectation, the osteotomy plane did not need to be parallel to the tibial plateau plane in the sagittal view. However, the osteotomy gap should be rectangular in the sagittal view. The hinge position located nearly in the center of the sagittal view.

Morphology of visual projection neurons supplying premotor area in the brain of the silkmoth Bombyx mori.

Sex pheromones orient male moths toward conspecific female moths; the presence of visual information modulates this behavior. In the current study, we explore candidate neuronal pathways for the interaction between vision and the locomotor signal for pheromone orientation. We describe the connectivity between visual neuropils and brain premotor centers, the posterior slope (PS) and the lateral accessory lobe (LAL), in the silkmoth Bombyx mori. Using a single-cell labeling technique, we analyze visual projection neurons supplying these areas. Neurons from both the medulla and lobula complex projected to the PS but only the neurons originating in the lobula complex had additional processes to the LAL. Further, we identified populations of putative feedback neurons from the premotor centers to the optic lobe. Neurons originating in the PS were likely to project to the medulla, whereas those originating in the LAL were likely to project to the lobula complex. The anatomical study contributes to further understanding of integration of visual information on the locomotor control in the insect brain.

Factors Associated With Posterior Cruciate Ligament Tightness During Cruciate-Retaining Total Knee Arthroplasty.

BACKGROUND: The purpose of our study was to identify factors affecting posterior cruciate ligament (PCL) tightness during cruciate-retaining total knee arthroplasty. METHODS: A total of 225 varus osteoarthritic knees that underwent cruciate-retaining total knee arthroplasty were included in this study. When the flexion gap was tighter than the extension gap after all bone resection and the lift-off sign was positive during surgery, the PCL was released. The association between PCL release and potential risk factors, such as age, gender, body mass index, preoperative range of motion, anterior cruciate ligament status, preoperative hip-knee-ankle angle (HKA), decrease in posterior condylar offset, and also change in tibial posterior slope angle (TPSA) from preoperative to postoperative measurement, was evaluated by univariate and multivariate logistic regression analyses. RESULTS: The PCL was released in 68 of 225 knees (30.2%). According to the univariate logistic regression analysis, preoperative knee flexion angle (odds ratio [OR], 0.98), anterior cruciate ligament status (OR, 3.94), the decrease in medial (OR, 0.73) and lateral posterior condylar offset (OR, 0.76), preoperative HKA (OR, 1.1), preoperative (OR, 1.15) and postoperative TPSA (OR, 0.77), and the decrease in TPSA (OR, 1.23) were associated with PCL release. Multivariable stepwise logistic regression analysis demonstrated that preoperative HKA (P < .001), postoperative TPSA (P = .02), and the decrease in TPSA (P < .001) were independently associated with PCL release. CONCLUSION: Many factors are associated with PCL tightness. The change in TPSA between preoperative and postoperative measurements was a higher risk factor than postoperative TPSA.

Primary stability of different plate positions and the role of bone substitute in open wedge high tibial osteotomy.

BACKGROUND: The purpose of this study was to compare the mechanical fixation strengths of anteromedial and medial plate positions in osteotomy, and clarify the effects of bone substitute placement into the osteotomy site. METHODS: Twenty-eight sawbone tibia models were used. Four different models were prepared: Group A, the osteotomy site was open and the plate position was anteromedial; Group B, bone substitutes were inserted into the osteotomy site and the plate position was anteromedial; Group C, the osteotomy site was open and the plate position was medial; and Group D, bone substitutes were inserted into the osteotomy site and the plate position was medial. The loading condition ranged from 0 to 800N and one hertz cycles were applied. Changes of the tibial posterior slope angle (TPS), stress on the plate and lateral hinge were measured. RESULTS: The changes in the TPS and the stress on the plate were significantly larger in Group A than in Group C. These were significantly larger in Group A than in Group B, and in Group C than in Group D. There was no significant difference between Group B and Group D, and no significant difference between knee flexion angles of 0° and 10°. Stress on the lateral hinge was significantly smaller when bone substitute was used. CONCLUSIONS: A medial plate position was biomechanically superior to an anteromedial position if bone substitute was not used. Bone substitute distributed the stress concentration around the osteotomy gap and prevented an increase in TPS angle regardless of the plate position.

Medial tibial plateau morphology and stress fracture location: A magnetic resonance imaging study.

AIM: To determine the location of medial tibial plateau stress fractures and its relationship with tibial plateau morphology using magnetic resonance imaging (MRI). METHODS: A retrospective review of patients with a diagnosis of stress fracture of the medial tibial plateau was performed for a 5-year period. Fourteen patients [three female and 11 male, with an average age of 36.4 years (range, 15-50 years)], who underwent knee MRI, were included. The appearance of the tibial plateau stress fracture and the geometry of the tibial plateau were reviewed and measured on MRI. RESULTS: Thirteen of 14 stress fractures were linear, and one of them stellated on MRI images. The location of fractures was classified into three types. Three fractures were located anteromedially (AM type), six posteromedially (PM type), and five posteriorly (P type) at the medial tibial plateau. In addition, tibial posterior slope at the medial tibial plateau tended to be larger when the fracture was located more posteriorly on MRI. CONCLUSION: We found that MRI showed three different localizations of medial tibial plateau stress fractures, which were associated with tibial posterior slope at the medial tibial plateau.