Retrospective clinical study of 842 clasp-retained removable partial dentures with a metal framework: survival, maintenance needs, and biologic findings.

OBJECTIVES: To evaluate clasp-retained removable partial dentures (C-RPDs) with a metal framework for survival, maintenance requirements, and biological implications. METHOD AND MATERIALS: C-RPDs were retrospectively analyzed based on patient records. Treatment failure was defined as fracture of a framework component (metal base or connector) or loss of an abutment tooth. Other outcome variables included factors that might conceivably impact C-RPD survival (maxilla vs. mandible, Kennedy classes, opposing dentitions, treatment by students vs. certified dentists), mobility and caries of abutment teeth (in relation to clasp designs), and maintenance requirements (relining, clasp or resin fractures). Differences were evaluated by appropriate statistical tests at the P ≤ .05 level. RESULTS: A total of 612 patients (339 men, 273 women) 60.0 ± 11.5 years old at delivery were included, covering 842 C-RPDs and a mean observation period of 42.1 ± 33.2 months. Kaplan-Meier C-RPD survival was 76.2% after 5 years and 49.5% after 10 years. Biological complications (i.e. loss of abutment teeth) accounted for the vast majority (95.6%) of C-RPDs failures, and Kaplan-Meier C-RPD survival was significantly better in the mandible (P = .015). Some clasp designs contributed significantly to caries and removal of abutment teeth (both P < .05). No other significant differences were noted. CONCLUSION: Tooth loss both emerges as the main cause of C-RPDs failure and might be amenable to careful selection of clasp designs. Overall, better C-RPD survival should be expected in the mandible. A non-contributory role of Kennedy classes and opposing dentitions is tentatively suggested based on numerically heterogeneous subgroups.

Comparison of Conventional and Digital Workflows in the Fabrication of Fixed Prostheses: A Systematic Review.

When considering dental restorations, the use of fixed partial dentures is one of the most widely accepted treatment options. In the past, fabrication was done using traditional techniques and the conventional workflow was by far the popular method; however, nowadays digital workflows are being used as a means to produce the prosthesis. This systematic review aims to compare the workflows by considering their respective qualities, such as precision, efficiency, cost-effectiveness, and clinical performance. A complete search has been carried out to incorporate any relevant studies published between the years 2012 and 2023 in databases such as Scopus, Web of Science, PubMed, ScienceDirect, and Cochrane Library. Two independent reviewers screened articles for inclusion and assessed the studies' methodological quality rating via the NIH Tool. A total of 22 relevant articles were reviewed after a systematic search strategy. The main outcome of the review was digital workflows were found to reduce working time, eliminate the selection of trays, minimize material consumption, and enhance patient comfort and acceptance. The studies also showed that digital workflows resulted in greater patient satisfaction and higher success rates than conventional workflows. Workflows for digital dentistry demonstrated to be better than traditional ones due to the cost-effectiveness, accuracy, and time optimization for the fabrication of fixed prostheses.

Influence of prosthodontic rehabilitation and dietary advice on glycaemic control, nutritional status and oral health-related quality of life of older adults with type 2 diabetes.

OBJECTIVES: This prospective clinical study aimed to determine the influence of oral prosthodontic rehabilitation with partial removable dentures and simplified dietary advice on glycaemic control, nutritional status and oral health-related quality of life (OHRQoL) of older adults with type 2 diabetes. BACKGROUND: Individuals with tooth loss who did not wear complete or partial dentures are more likely to be at nutritional risk, suggesting that using dental prostheses would benefit the re-establishment of an adequate nutritional status and potentially improve quality of life. Nutritional therapy is essential for diabetes prevention, treatment and management, favouring glycaemic control. The literature provides little evidence on the contribution of partial removable dentures to improving diabetes control, nutritional profile and satisfaction in older adults, especially those with type 2 diabetes. MATERIALS AND METHODS: Older individuals diagnosed with type 2 diabetes mellitus, aged 60 years or older and needing oral rehabilitation with partial removable dentures were eligible for this prospective study. The primary outcome measure was glycaemic control, measured by glycated haemoglobin (HbA1c) levels. The Oral Health Impact Profile (OHIP-14) questionnaire and the Mini Nutritional Assessment short-form (MNA-SF) represented secondary outcome measures. These measures were assessed at baseline and 12 months of follow-up after prosthesis delivery, combined with simple dietary advice in pamphlet form. The data were analysed using the Wilcoxon matched-pairs test. RESULTS: Forty-four patients who met the inclusion criteria and required treatment with removable partial dentures were selected for this study, which was carried out for a year. During this period, seven participants declined to participate because they moved to another city. Hence, a final sample of 37 participants (16 men and 21 women, average age of 65.8 years, ranging from 60 to 83 years) were included in the study. No laboratory parameter (HbA1c levels) changed significantly during the investigation. The number of older adults at risk of malnutrition was significantly lower at 12 months than at baseline. Furthermore, nutritional status significantly improved 12 months after prosthodontic treatment combined with dietary advice, and the effect sizes were large. OHRQoL significantly improved after prosthodontic therapy combined with dietary advice. CONCLUSIONS: Prosthodontic treatment with partial dentures associated with simple dietary advice did not influence glycaemic control but improved the nutritional status and OHRQoL of older adults with type 2 diabetes.

Dimensional Accuracy of Two-Step Impressions Relined with Extra-Light Addition Silicone Material.

Objectives: Some small defects may remain in the impression after making a two-step putty-light body impression. The aim of this study was to evaluate and compare the dimensional accuracy of 2-step and relined 2-step (3-step) putty-light body impressions. Materials and Methods: In this in vitro study, 30 impressions were made with putty, light body, and extra-light body addition silicone materials using the 2-step and 3-step impression techniques (N=15). An epoxy resin master model was made duplicating a maxillary typodont with left first premolar and first molar teeth prepared with a shoulder finish line and truncated pyramidal-shaped indices in the mid-palate and third molar sites. In addition to creating a reference digital model by scanning the master model, 30 master casts were scanned to produce digital models. The anteroposterior (AP) and cross-sectional (CS) dimensional accuracy of the models were compared with the master model using linear measurements. Moreover, tooth size measurements were made and compared using the root mean square (RMS). Two-sample t-test was applied to analyze the data (α=0.05). Results: The mean AP and RMS differences between the two study groups were not significant (P>0.05). However, the CS difference between the two groups was significant (P<0.001), and the 3-step impression technique showed smaller discrepancies in comparison to the master model. Conclusion: There was no significant difference in accuracy of the two techniques for single-unit and multiple-unit preparations. The 3-step impression technique had a higher CS dimensional accuracy.

Stereophotometric facial changes in edentulous older adults after rehabilitation with complete dentures.

OBJECTIVES: To evaluate the facial characteristics of edentulous older adults who underwent rehabilitation using complete dentures, and to compare them with dentate individuals. BACKGROUND: Edentulism rehabilitation with complete dentures aims to restore occlusion and facial aesthetics. MATERIALS AND METHODS: The study included 102 edentulous participants needing prosthodontic rehabilitation with complete dentures and 30 with a natural dentition (aged >65). The 3D facial scans were performed using an Artec optical scanner. Superficial facial landmarks were identified, and 16 parameters were calculated. Regional analysis with the superimposition of two scans was used to calculate the average distances and percentage of non-matching surfaces in the 11 regions. Paired and independent t-tests (α = .05) were used to test for group differences, as appropriate. RESULTS: After rehabilitation with complete dentures, facial changes were most noticeable in the perioral region: wider rima oris, longer upper lip, wider upper vermilion, and more protruded profile. The comparison of facial regions without and with dentures showed fuller and curvier cheeks, with no direct influence of dentures. The edentulous faces with dentures appeared shorter and more retruded than those of dentate individuals. A narrower lower vermilion, retruded upper lip, and more flattened facial profile were observed in females with dentures than in their dentate peers. CONCLUSION: Besides the expected positive influence of rehabilitation with complete dentures on facial appearance in the perioral region, there are some unexpected changes, such as fuller cheeks, but there is still deficiency in vertical facial dimensions and a more flattened facial profile.

Periodontal Tissue Responses to Restorations with and without Cervical Finish Line: A Systematic Review and Meta-analysis.

The purpose of this review was to evaluate the periodontal and peri-implant tissue responses to restorative approaches with and without cervical finish line on teeth and dental implants. An electronic search was performed in PubMed/MEDLINE, Embase, Cochrane Library, LILACS, Web of Science, and Scopus databases, and in the gray literature. Controlled clinical trials and prospective cohort studies were included. Analyzed outcomes included gingival index (GI), bleeding on probing (BOP), probing depth (PD), gingival thickness (GT), marginal stability (MS), and marginal bone loss (MBL). A meta-analysis was then performed in two parts: the first compared results of restorations on teeth with and without cervical finish line, and the second compared results of restorations on implant abutments with and without cervical finish line. Regarding the tooth-based restoration analysis, 7 out of 1,388 selected articles were included in the systematic review, and 2 were selected for the meta-analysis. For implantbased restorations on abutments with and without cervical finish line, 6 out of 707 selected articles were included in the systematic review, and 2 in the meta-analysis. No significant differences in periodontal and peri implant indexes were identified between both prosthetic approaches in situations with and without cervical finish lines.

Minimally invasive prosthodontics using the concept of prosthetically guided orthodontics.

OBJECTIVE: This case report aims to present how digital technology can be employed to plan the orthodontic movement of teeth into their final positions for prosthodontic rehabilitation. An interdisciplinary approach to treatment planning and the result of prosthodontic treatment involves the cooperation of an orthodontist and a prosthodontist. When planned to achieve optimal results for a minimally invasive and functional prosthodontic treatment, orthodontic pretreatment provides superior esthetic results and favorable long-term success. CLINICAL CONSIDERATIONS: The orthodontic movements of the teeth were planned so that the prosthodontist could reconstruct an optimally functional and esthetic occlusion while preserving the hard dental tissues. The orthodontic pretreatment minimized the need to prepare the teeth, avoiding any mucogingival surgery to improve the gingival architecture. CONCLUSIONS: In complex clinical cases, it is essential to evaluate the advantages of an orthodontic pretreatment before starting a prosthodontic treatment. This pretreatment can help preserve dental tissues, reduce or eliminate the need for surgical intervention, and achieve long-term stability and esthetic results. CLINICAL SIGNIFICANCE: This case clearly shows the benefits of orthodontic pretreatment for prosthodontic outcomes. With modern digital tools, such an orthodontic pretreatment should become standard clinical practice when planning a complex clinical case.

Dentists' perspectives, practices, and factors associated with informed consent process for fixed prosthodontic treatment: a cross-sectional study of kampala metropolitan area, Uganda.

BACKGROUND: Dentists have a legal and ethical obligation to obtain informed consent from patients before carrying out treatment. In Uganda, the process of obtaining informed consent in dentistry is not well documented. The aim of the present study was to determine dentists' perspectives and practices regarding informed consent to fixed prosthodontic treatment (FPT) in Kampala Metropolitan, Uganda. METHODS: A quantitative cross-sectional study was conducted among 153 dentists from July to September 2023. Data were collected using a semi-structured self-administered questionnaire that included both closed- and open-ended questions. The questionnaire included items on participants' sociodemographic information, perspectives, and practices about informed consent for FPT. Perspectives were rated using ten items on a five-point Likert scale. The minimum possible total score was 10, and the maximum possible score was 50. Descriptive statistics and Poisson regression were used to summarize and analyze the quantitative data, and the significance level was set at p < 0.05. Open-ended items were analyzed using content analysis. RESULTS: The majority (83.9%) of the participants were general dentists with working experience ranging from 1 to 38 years and a median of 8 years. The majority were familiar with the concept of informed consent and had positive perspectives regarding its use for FPT. The mean score for perspectives was 39.27 (SD, 5.42). However, there were variations in the practices of the dentists. More than three-quarters (87.6%) reported that they always obtained the patient's informed consent before FPT. Less than a third (29.4%) obtained written consent for FPT. About half of the dentists provided information regarding the procedure, benefits, and risks of treatment during the consent process. Bivariate analysis showed that the use of written consent for FPT was significantly (p < 0.05) associated with having a work experience of more than 10 years and having had training involving informed consent after undergraduate studies. CONCLUSION: The present study provides baseline data regarding perspectives and practices regarding informed consent for FPT among dentists in Uganda. It is recommended that regular training courses be developed to highlight the importance of improved informed consent practices for patient protection and to instruct dentists about obtaining valid informed consent. There is a need for future research to streamline guidelines for the informed consent process in dental care in Uganda.

Correlation Between Nose-to-Chin Distance and Other Measurements Used to Determine Occlusal Vertical Dimension.

OBJECTIVES: Accurate occlusal vertical dimension (OVD) establishment is an essential component of prosthodontic treatment. No accurate approach exists to determine the appropriate OVD for patients without posterior teeth. This study aimed to correlate the accuracy of the nose-to-chin distance with various facial measurements and thumb length in dentulous and edentulous Saudi patients. MATERIALS AND METHODS: The participants comprised 100 fully dentulous Saudi male dental students aged 20-30 years (group 1) and 20 completely edentulous patients aged 60-70 years (group 2). We evaluated the correlations between the OVD (nose-to-chin distance) and the distance from the pupil to the corner of the mouth, the vertical length at midline of the nose (from subnasion to glabella), the distance from the outer canthus of one eye to the inner canthus of the other, twice the distance between the inner canthi, and the distance from the thumb tip to the index fingertip. STATISTICAL ANALYSIS: Spearman's correlation and regression analysis were performed to analyze and assess the correlations between the clinically measured nose-to-chin distance and other parameters, with significance set at 0.05. RESULTS: In edentulous patients, the results showed a significant, strong, positive correlation between the nose-to-chin distance and the distance between the pupil and the mouth corner. In dentate subjects, a significant, strong, positive association was found between the nose-to-chin distance and the distance from the outer canthus of one eye to the inner canthus of the other. The linear regression analysis revealed that the distance between the pupil and the mouth corner in edentulous patients significantly predicted the OVD. CONCLUSIONS: In both groups, the distance from the outer canthus of one eye to the inner canthus of the other and the distance from the pupil to the mouth corner were reliable and accurate for OVD measurements. These could be considered appropriate methods for OVD determination during full-mouth rehabilitation.

Exploring the Impact of 3D Printing Technology on Patient-Specific Prosthodontic Rehabilitation: A Comparative Study.

Introduction: The rapid advancement of 3D printing technology has opened new avenues for patient-specific prosthodontic rehabilitation. This study aimed to explore the impact of 3D printing technology on prosthodontic outcomes and patient satisfaction through a comparative analysis. Materials and Methods: A total of 100 patients requiring prosthodontic rehabilitation were recruited for this study. The patients were randomly divided into two groups: the experimental group, where 3D printing technology was utilized for the fabrication of patient-specific prostheses, and the control group, where conventional fabrication techniques were employed. Various parameters were assessed, including prosthesis fit, occlusion, esthetics, and patient-reported outcomes such as comfort and satisfaction. Digital measurements and subjective evaluations were conducted to compare the outcomes between the two groups. Statistical analysis was performed using appropriate tests. Results: Preliminary findings indicated that the use of 3D printing technology in prosthodontic rehabilitation resulted in superior prosthesis fit, enhanced occlusal stability, and improved esthetics compared to conventional methods. Moreover, patients in the experimental group reported higher levels of comfort and overall satisfaction. The advantages of 3D printing technology were observed across different types of prosthodontic restorations, including crowns, bridges, and dentures. These results highlight the potential of 3D printing technology to revolutionize patient-specific prosthodontic rehabilitation. By facilitating precise fabrication, customization, and improved functional outcomes, 3D printing can enhance the overall quality of prosthodontic care. Further long-term studies are warranted to validate these findings and explore the cost-effectiveness and long-term durability of 3D-printed prostheses. Conclusion: In conclusion, this study demonstrates that the integration of 3D printing technology in patient-specific prosthodontic rehabilitation holds great promise for achieving optimal functional and esthetic outcomes. The findings contribute to advancing prosthodontic practices and provide valuable insights for clinicians and researchers seeking to incorporate this innovative technology into their treatment protocols.

Evaluation of Prosthodontic Complications in Screw-Retained and Cement-Retained Crowns in Dental Implants: An Original Research.

Aim: Single-tooth implant restorations, whether screw-retained or cement-retained, are essential for prosthodontic rehabilitation despite having low design flexibility, cosmetic appeal, and high 5-year survival rates. Materials and Methods: A study involving 14 patients with missing mandibular first molars used 28 implants and cement-retained and screw-retained prostheses. Patients had a single edentulous gap, adequate dental hygiene, and sufficient bone volume at the implant site. The study adhered to the Helsinki Declaration, followed WHO 2007 safety guidelines, and evaluated soft tissue, bone height, and bone loss. Data analysis included the Student's t-test and Mann-Whitney U-test. Results: In patients between the ages of 17 and 46, single-implant restorations were compared with cement- and screw-retained at 6 months. Abutment screw loosening and peri-implant soft-tissue traits did not differ significantly from one another. Conclusion: The study compared screw- and cement-retained implant restorations in 28 single-tooth implant-supported prostheses over a 6-month functional loading period, finding no significant improvement in either approach.

Long-term effectiveness of UV functionalised short (≤ 6 mm) dental implants placed in the posterior segments of the atrophied maxilla: controlled case series.

This study evaluated long-term effectiveness UV functionalised short implants (≤ 6 mm) placed in the posterior segments of the atrophied maxilla. The study included 47 patients from 2018 to 2023 (aged 27 to 56 years, 24 women and 23 men) without any systemic diseases, with unilateral/bilateral missing teeth and vertical atrophy of the posterior maxillary area. Total installed were 64 short UV-functionalized implants and 62 standard implants over 10 mm in length in segments maxilla with sufficient bone parameters. Clinical, laboratory and cone beam computed tomography (CBCT) methods were used to plan implant therapy. The clinical indices included the following parameters: ISQ, MBL, OHIP-G scale. For short implants, the median ISQ at placement was 62.2 for primary stability and the median ISQ at 5 months was 69.6 ISQ. For standard implant, the mean ISQ at placement was 64.3 ISQ, and ISQ after 5 months was 71.6 ISQ. After 6 months mean MBL short implants 0.87 mm, after 1 year 1.13 mm, after 5 years was 1.48 mm. After 6 months mean MBL standard implants 0.84 mm, after 1 year 1.24 mm, after 5 years was 1.58 mm. Mean OHIP-G scores-patients satisfaction with the implant at 4.8 ± 0.3, satisfaction with the operation 4.6 ± 0.4; satisfaction with prosthetics 4.7 ± 0.5. Cumulative success rate 5 years short implants was 96.7%, standard implants was 97.4%, and prosthesis cumulative survival rate was 97.2%. Short ultraviolet functionalized implants used in the posterior resorbed segment of maxilla have been shown to be a reliable alternative to sinus lift, demonstrating fewer complications, reduction in the number of additional surgical interventions and showed satisfactory long-term survival.

Biological shaping as a conservative alternative for crown lengthening: A review.

OBJECTIVES: The perio-restorative approach to maintaining supracrestal tissue attachment (STA; formerly known as biologic width) is a fundamental goal in modern dentistry. This article aims to review the clinical impact of biologic shaping (BS) as an innovative alternative to traditional crown lengthening procedures, reflecting over two decades of clinical experience. MATERIAL AND METHODS: As a review paper, it is crucial to highlight that BS stands as a unique approach designed to optimize STA while emphasizing minimal to no removal of supporting bone. The review spans over two decades, consistently demonstrating clinical efficacy and predictability. Remarkably, BS focuses on addressing issues such as root concavities, developmental grooves, irregularities, furcation lips, and CEJ offering a remarkable level of clinical precision. RESULTS: The reviewed literature underscores that BS has consistently achieved substantial clinical success in fulfilling its objectives. This method presents a biologically sound alternative to traditional crown lengthening, placing a strong emphasis on the preservation of essential bone tissue and the establishment of durable STA. CONCLUSIONS: The results suggest that BS is a logical and biologically driven approach for maintaining STA, making it a promising alternative to traditional crown lengthening. The method offers a predictable and reproducible way to preserve bone tissue while achieving durable STA. This innovation holds great promise in the field of periodontal and restorative dentistry.

Clinical assessment of maxillary screw-retained implant prosthesis fabricated from digital versus conventional full- arch implant impression. A randomized controlled clinical trial.

OBJECTIVES: To evaluate the peri-implant marginal bone loss (MBL) and prosthodontic complications of maxillary screw-retained implant prosthesis fabricated from digital versus conventional full- arch implant impression. MATERIAL AND METHODS: 28 participants with edentulous maxillary arches were randomly selected and enrolled in two equal groups; Group I conventional impression group (CIG) and Group II Digital impression group (DIG). All patients were rehabilitated with maxillary screwretained implant prosthesis retained by 6 implants. Peri-implant MBL and prosthodontic complications and were registered at 6, 12, and 24 months (m). Data was collected and statistically analyzed. RESULTS: Regarding the effect of time, there was a statistically significant increase in MBL at 6, 12 and 24 m follow-up periods (P<.001). As for the effect of groups, there was no statistically significant difference in MBL between CIG and DIG at 6, 12 and 24 m where P value was 0.083, 0.087 and 0.133 respectively. Prosthetic complications were recorded 19 times in the conventional group and 12 times in the digital group with no significant difference between both groups (P=.303). CONCLUSION: Digital full -arch implant impression is a reliable impression technique and may represent an alternative to conventional impression technique in the fabrication of maxillary screw-retained implant prosthesis.

Effectiveness of virtual reality interactive simulation practice in prosthodontic education: A systematic review and meta-analysis.

INTRODUCTION: Virtual reality-based interactive simulation (VRIS) provides a safe and controlled environment for dental students and professionals to develop skills and knowledge. This study aimed to investigate the effectiveness of using the VRIS for prosthodontic practice and to explore the trends, application areas, and users' attitudes towards VRIS. MATERIALS AND METHODS: This review followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines for searching studies published until 21 March 2023 that reported quantitative or qualitative learning outcomes related to the use of VRIS for dental prosthodontic practice and clinical training. The quality of the included studies was assessed using the Medical Education Research Study Quality Instrument (MERSQI) and Newcastle-Ottawa Scale-Education (NOS-E) tools. A random-effects meta-analysis was conducted to compare the intervention group (utilizing VRIS) and the control group (employing conventional prosthodontic training methods) based on performance skill scores and task completion time, with a significance level set at <.05. RESULTS: The meta-analysis revealed that the utilization of VRIS generally improves students' performance scores (SMD = 1.04; 95% CI, -0.35 to 2.44; I2 > 50%; p = .13) and reduces task completion time (SMD = -0.03; 95% CI, 1.39-7.72; I2 > 50%; p = .93). Notably, using VRIS significantly enhanced the performance scores in implant surgery practice (SMD = 0.26; 95% CI, 0.09-0.42; p < .05). Additionally, the VRIS method significantly reduced task completion time in the cavity restorative preparation task (SMD = -1.19; 95% CI, -1.85 to -0.53; p < .05). CONCLUSION: Engaging in practice with VRIS has the potential to enhance learning proficiency in prosthodontic education. The advantages associated with VRIS encompass the provision of immediate feedback, decreased task completion time, heightened confidence and motivation, accelerated skill acquisition, improved performance scores, and increased learning engagement.

Correlation between theoretical knowledge and the difference between self- and teaching doctor-assessment.

OBJECTIVES: The right intuition for self-assessment without overestimating or underestimating oneself compared to theoretical knowledge is a skill that requires conscious practice and is very often paradoxically opposed to the level of knowledge. Self-assessment is an essential skill for dental professionals for lifelong learning and improvement. The objective of our study was to assess the correlation between theoretical knowledge and the difference between self- and teaching doctor-assessment. METHODS: The app "digital course organizer" for organization and assessment was used for the self- and teaching doctor-assessment of students for each day of patient treatment during the clinical courses at a university hospital. The difference between the self- and teaching doctor-assessment was compared to the score of an initial theoretical written test at the beginning of the eighth semester to assess the correlation between overestimation or underestimation and theoretical knowledge. RESULTS: A total of 309 dental students over four semesters in the clinical study phase (fourth and fifth years; eighth and 10th semesters) participated in the investigation. The overall view of all values showed very low correlations (<0.2) of the assessment difference values of both practical courses for the initial written test. CONCLUSION: There were very low correlations between the initial written test (theoretical knowledge) and the difference between self- and teaching doctor-assessment as well as no evidence of overestimation and underestimation.

Construction of Custom Ocular Prosthesis With Reduced Number of Visits: A Case Report.

Construction of an ocular or eye prosthesis can be challenging, as it is a cosmetic device. It needs good communication between dentists and maxillofacial technicians. The construction process normally requires multiple appointments, which involve at least four visits starting with ocular impression to insertion of the prosthesis. This article will outline the clinical step and propose a clinical technique to reduce the number of appointments from four to three appointments, which would benefit both the patient and practitioner.

Removable Partial Denture - Functional Impression Techniques: Review.

The objective of this article is to concisely review the main clinical techniques used to make the functional impression to manufacture a removable partial denture. Through this review, the dentist can develop his clinical knowledge.

Impact of two different patient decision aids in prosthodontic consultations: a prospective randomized controlled study.

OBJECTIVES: Different approaches to prosthodontic consultation, all involving a strong focus on shared decision-making, were analyzed from the perspective of patients by inter-group comparisons. No patient decision aid (PDA) was used in the control group, a paper-based PDA in test group 1, and a software-based PDA in test group 2. MATERIALS AND METHODS: Seventy-five patients were prospectively randomized to the control group or a test group. All patients then rated the consultation on a questionnaire, six key items of which were analyzed, along with the time spent on each consultation. RESULTS: Overall satisfaction was highest in test group 2, with a significant difference from the control group (p = 0.015). Test group 2 showed the most favorable ratings for all six questionnaire items, which invariably was significant compared to the control group (p = 0.032). Test group 1 significantly differed from test group 2 based on two items (consultation was adequately intelligible: p = 0.011; consultation was adequately comprehensive: p = 0.034) but not from the control group based on any item (p = 0.070). CONCLUSIONS: Within the limitations of this study, the use of a software-based PDA, in particular, can be recommended based on patient satisfaction and was associated with the shortest sessions for consultation. CLINICAL RELEVANCE: Patients are routinely faced with a wealth of information in dental offices and may be overwhelmed especially by prosthetic treatment options and decision requirements. Our findings shed some light on the nature of aids that may truly be helpful in the process of shared decision-making. TRIAL REGISTRATION: ClinicalTrials.gov.Identifier: ISRCTN11472465.