Microaeration promotes volatile siloxanes conversion to methane and simpler monomeric products.

The ubiquitous use of volatile siloxanes in a myriad of product formulations has led to a widespread distribution of these persistent contaminants in both natural ecosystems and wastewater treatment plants. Microbial degradation under microaerobic conditions is a promising approach to mitigate D4 and D5 siloxanes while recovering energy in wastewater treatment plants. This study examined D4/D5 siloxanes biodegradation under both anaerobic and microaerobic conditions ( [Formula: see text]  = 0, 1, 3 %) using wastewater sludge. Results show that the use of microaeration in an otherwise strictly anaerobic environment significantly enhances siloxane conversion to methane. 16S rRNA gene sequencing identified potential degraders, including Clostridium lituseburense, Clostridium bifermentans and Synergistales species. Furthermore, chemical analysis suggested a stepwise siloxane conversion preceding methanogenesis under microaerobic conditions. This study demonstrates the feasibility of microaerobic siloxane biodegradation, laying groundwork for scalable removal technologies in wastewater treatment plants, ultimately highlighting the importance of using bio-based approaches in tackling persistent pollutants.

Synthesis, Solvatochromism and Estimation of Ground and Excited State Dipole Moments of Silylated Benzothiazole Dyes.

Dyes derived from benzothiazoles are an important class of heterocycles which have remarkable photophysical properties. New photoluminescent 2-phenylbenzothiazole derivatives containing different functional groups were synthesized in high yields and used for silylated derivatives synthesis. The new photoactive compounds were fully characterized and their photophysical properties were investigated. The absorption and fluorescence spectra of the benzothiazoles and their silylated derivatives were evaluated in a series of organic solvents. The results showed that the benzothiazoles present absorption in the ultraviolet range and emission in the blue region with moderate quantum yields and large Stokes shift. The solvatochromism of these compounds was investigated by using Lippert and ET(30) Dimroth-Reichardt empirical solvent polarity scales. The dipole moments obtained by Bakshiev and Kawaski-Chamma-Viallet equations revealed that the excited states were more polar than the ground states.

Assessment of Wood Bio-Concrete Properties Modified with Silane-Siloxane.

Bio-based materials, such as wood bio-concrete (WBC), hold promise in reducing energy consumption and carbon footprint of the construction industry. However, the durability of these materials is not well understood and can be negatively affected by the high water absorption capacity of wood bio-aggregates. In the field of cement composites, for example, silane-siloxane-based water repellent has been used to protect such materials from natural environmental attack. Nevertheless, there is still a limited understanding of various aspects related to this type of treatment, including its performance when applied to the bio-concrete substrate. This research aimed to investigate the influence of silane-siloxane on the rheology and hydration of cementitious paste through isothermal calorimetry and thermogravimetric analysis. Additionally, the impact of silane-siloxane on the physical and mechanical properties of WBCs was examined by conducting tests at fresh state (flow table and entrained air content) and hardened state (compressive strength and capillary water absorption). The composites were produced with a volumetric fraction of 45% of wood shavings while the cement matrix consisted of a combination of cement, rice husk ash, and fly ash. Silane-siloxane was applied in three ways: as coating, incorporated as an admixture, and in a combination of both methods. The results indicated that by incorporating silane in the cementitious pastethe viscosity increased by 40% and the hydration was delayed by approximately 6 h when compared to the reference. In addition, silane improved the compressive strength of WBCs by 24% when incorporated into the mixture, expressively reduced the water sorptivity of WBCs (93%), and was more effective if used as coating.

Fabry-Perot Interferometer Used to Measure Very Low Static Pressure Measurements.

This paper describes the use of an optical instrument, the Fabry-Perot interferometer, adapted to measure very low pressures. The interferometer consists of two high-reflectance flat mirrors placed one in front of another. In addition, a metallic chamber contains air or a gas. In one of the faces of the chamber, a flexible thin silicone membrane is attached and, over it, one of the mirrors is glued. The other mirror rests in a fixed mechanical mounting. Light crosses both mirrors and, when it leaves them, forms an interference pattern consisting of concentric circular fringes. When the pressure is increased/decreased within the chamber, a displacement of the fringes is observed due to the movement of the glued mirror. By measuring the fringe displacement and knowing the pressure, a calibration plot can be made. Minimum pressure measurements of about tens of Pascals were achieved.

Nutrient controlled release performance of bio-based coated fertilizer enhanced by synergistic effects of liquefied starch and siloxane.

The porous structure and hydrophilicity of coating shells affect the nutrient controlled-release performance of castor oil-based (CO) coated fertilizers. In order to solve these problems, in this study, the castor oil-based polyurethane (PCU) coating material was modified with liquefied starch polyol (LS) and siloxane, and a new coating material with cross-linked network structure and hydrophobic surface was synthesized, and used it to prepare the coated controlled-release urea (SSPCU). The results demonstrated that the cross-linked network formed by LS and CO improved the density and reduced the pores on the surface of the coating shells. The siloxane was grafted on the surface of coating shells to improve its hydrophobicity and thus delayed water entry. The nitrogen release experiment indicated that the synergistic effects of LS and siloxane improved the nitrogen controlled-release performance of bio-based coated fertilizers. Nutrient released longevity of SSPCU with 7 % coating percentage reached >63 days. Moreover, the nutrient release mechanism of coated fertilizer was further revealed by the analysis of the release kinetics analysis. Therefore, the results of this study provide a new idea and technical support for development of efficient and environment-friendly bio-based coated controlled-release fertilizers.

Acaricide activity of organo-modified siloxane and acaricide associations in Rhipicephalus microplus.

Search to a new alternative to control bovine ticks (Rhipicephalus microplus), the present study aimed to evaluate the acaricidal activity of organo-modified siloxane alone and in association with different commercial products or with piperonyl butoxide (BPO). Engorged females were subjected to an in vitro immersion test and 10 groups were used: control, 0.5% siloxane, 1% siloxane, 2% siloxane, 0.5% siloxane + 5% BPO, 1% siloxane + 5% BPO, 2% siloxane + 5% BPO, commercial product, 0.5% siloxane + commercial product, and 1% siloxane + commercial product. After immersion, engorged females were incubated for 14 days for oviposition and hatchability tests. Another immersion test was performed with 5% siloxane and 2.5% siloxane + 10% BPO to evaluate the histopathological changes. Then, engorged females were incubated for 0, 2, 4, 8, 12, 24, 36, 48, 60, 72, 84, 96, 120, 144, and 168 h and immersed in 10% formaldehyde for later analyses. The unassociated siloxane showed an acaricide efficacy of 93.88% at 2% concentration, and when associated with 5% BPO, it reached 100% efficacy at all tested concentrations. The tested commercial products showed enhanced efficacy when associated with siloxane. Histopathological analysis showed cell changes in both treatments and total cell disintegration after 120 h in the 5% siloxane group and after 96 h in the 2.5% siloxane + 10% BPO group. Therefore, siloxane alone or in combination is an alternative against R. microplus, and siloxane enhances the efficacy of available commercial products.

Highly Controlled Diffusion Drug Release from Ureasil-Poly(ethylene oxide)-Na+-Montmorillonite Hybrid Hydrogel Nanocomposites.

In this work, we report the effects of incorporation of variable amounts (1-20 wt %) of sodium montmorillonite (MMT) into a siloxane-poly(ethylene oxide) hybrid hydrogel prepared by the sol-gel route. The aim was to control the nanostructural features of the nanocomposite, improve the release profile of the sodium diclofenac (SDCF) drug, and optimize the swelling behavior of the hydrophilic matrix. The nanoscopic characteristics of the siloxane-cross-linked poly(ethylene oxide) network, the semicrystallinity of the hybrid, and the intercalated or exfoliated structure of the clay were investigated by X-ray diffraction, small-angle X-ray scattering, and differential scanning calorimetry. The correlation between the nanoscopic features of nanocomposites containing different amounts of MMT and the swelling behavior revealed the key role of exfoliated silicate in controlling the water uptake by means of a flow barrier effect. The release of the drug from the nanocomposite displayed a stepped pattern kinetically controlled by the diffusion of SDCF molecules through the mass transport barrier created by the exfoliated silicate. The sustained SDCF release provided by the hybrid hydrogel nanocomposite could be useful for the prolonged treatment of painful conditions, such as arthritis, sprains and strains, gout, migraine, and pain after surgical procedures.

In situ evaluation of surface roughness and micromorphology of temporary soft denture liner materials at different time intervals.

OBJECTIVE: To perform an in situ evaluation of surface roughness and micromorphology of two soft liner materials for dentures at different time intervals. BACKGROUND: The surface roughness of materials may influence the adhesion of micro-organisms and inflammation of the mucosal tissues. The in situ evaluation of surface roughness and the micromorphology of soft liner materials over the course of time may present results different from those of in vitro studies, considering the constant presence of saliva and food, the changes in temperature and the pH level in the oral cavity. MATERIALS AND METHODS: Forty-eight rectangular specimens of each of the two soft liner materials were fabricated: a silicone-based material (Mucopren Soft) and an acrylic resin-based material (Trusoft). The specimens were placed in the dentures of 12 participants (n = 12), and the materials were evaluated for surface roughness and micromorphology at different time intervals: 0, 7, 30 and 60 days. Roughness (Ra) was evaluated by means of a roughness tester. Surface micromorphology was evaluated by scanning electron microscopy. RESULTS: Analysis of variance for randomised block design and Tukey's test showed that surface roughness values were lower in the groups using the silicone-based material at all the time intervals (P < .0001). The average surface roughness was higher at time interval 0 than at the other intervals, for both materials (P < .0001). The surface micromorphology showed that the silicone material presented a more regular and smoother surface than the acrylic resin-based material. CONCLUSION: The surface roughness of acrylic resin-based and silicone-based denture soft liner materials decreased after 7 days of evaluation, leading to a smoother surface over time. The silicone-based material showed lower roughness values and a smoother surface than the acrylic resin-based material, thereby making it preferred when selecting more appropriate material, due its tendency to promote less biofilm build-up.

A novel method for bioethanol production using immobilized yeast cells in calcium-alginate films and hybrid composite pervaporation membrane.

Fermentation of sugar for production of ethanol was carried out using Saccharomyces cerevisiae cells immobilized in calcium alginate films. Thin films of calcium alginate casted on a microchannel surface were used instead of the typical spherical bead configuration. Yeast immobilized on alginate films produced a higher ethanol yield than free yeast cells under the same fermentation conditions. Also, a silicalite-1/poly dimethyl siloxane composite pervaporation membrane was synthesized for ethanol separation, and characterized with flux and separation factor. The composite membrane synthesized with a 3-1 ratio of silicalite-1 to poly dimethyl siloxane showed promising results, with a flux of 140.6g/m2h±19.3 and a separation factor of 37.52±3.55. Thus, the performance of both the alginate film with immobilized cells and the customized hybrid membrane suggests they could have an interesting potential application in an integrated reaction-separation device for the production and purification of bioethanol.

Application of a nanostructured platform and imprinted sol-gel film for determination of chlorogenic acid in food samples.

Chlorogenic acid (CGA) is a polyphenol derivative that widely exists in higher plants like fruits, vegetables, black teas, and some traditional Chinese medicines. In this work, we have proposed a sensitive and selective electrochemical sensor for detection of CGA. The sensor was based on a glassy carbon electrode (GCE) modified with a functional platform by grafting vinyltrimethoxysilane (VTMS) in multi-walled carbon nanotubes (MWCNTs) and covered by a molecularly imprinted siloxane (MIS) film prepared using the sol-gel process. The VTMS was grafted onto the surface of the MWCNTs via in situ free radical polymerization. The MIS was obtained from the acid-catalyzed hydrolysis/condensation of a solution consisting of tetraethoxysilane (TEOS), phenyltriethoxysilane (PTEOS), (3-aminopropyl)trimethoxysilane (APTMS), and CGA as a template molecule. The modification procedure was evaluated by differential pulse voltammetry (DPV) and scanning electron microscopy (SEM). Under optimized operational conditions, a linear response was obtained covering a concentration ranging from 0.08µmolL(-1) to 500µmolL(-1) with a detection limit (LOD) of 0.032µmolL(-1). The proposed sensor was applied to CGA determination in coffee, tomato, and apple samples with recoveries ranging from 99.3% to 108.6%, showing a promising potential application in food samples. Additionally, the imprinted sensor showed a significantly higher affinity for target CGA than the non-imprinted siloxane (NIS) sensor.

Bioadhesive Surfactant Systems for Methotrexate Skin Delivery.

Methotrexate (MTX) is an immunosuppressive drug for systemic use in the treatment of skin diseases, however, MTX presents a number of side effects, such as hepatotoxicity. To overcome this limitation, this study developed skin MTX delivery surfactant systems, such as a microemulsion (ME) and a liquid crystalline system (LCS), consisting of a glycol copolymer-based silicone fluid (SFGC) as oil phase, polyether functional siloxane (PFS) as surfactant, and carbomer homopolymer type A (C971) dispersion at 0.5% (wt/wt) as aqueous phase. Polarized light microscopy and small-angle X-ray scattering evidenced the presence of hexagonal and lamellar LCSs, and also a ME. Texture profile and in vitro bioadhesion assays showed that these formulations are suitable for topical application, showing interesting hardness, adhesiveness and compressibility values. Rheology analysis confirmed the Newtonian behaviour of the ME, whereas lamellar and hexagonal LCSs behave as pseudoplastic and dilatant non-Newtonian fluids, respectively. In vitro release profiles indicated that MTX could be released in a controlled manner from all the systems, and the Weibull model showed the highest adjusted coefficient of determination. Finally, the formulations were not cytotoxic to the immortalized human keratinocyte line HaCaT. Therefore, these bioadhesive surfactant systems established with PFS and C971 have great potential as skin delivery systems.

Influence of retentive areas associated to onlay preparations on the dimensional stability of silicone impression materials

This study evaluated the effect of retentive areas on onlay preparations on the dimensional alterations in condensation and addition silicone materials. A standard model with an onlay preparation was made. Each impression material was used through the double or simultaneous impression technique (n=25), resulting in a hundred impressions of the same model. Impressions were poured with type IV dental stone. Digital images were taken with a light microscope and the distances between the reference points created on the plaster dies were compared with the ones on the standard model. In the occlusal, mesial-medium and mesial-cervical segments, the double impression (DI) with condensation silicone presented similar values compared to the standard model. The values of the addition silicone with DI were similar to the standard model only in the mesial-occlusal segment. In the other segments (distal-cervical, distal-medium and distal-occlusal), all groups were statistically different from the control. It could be concluded that addition and condensation silicone impressions provided plaster dies with significant dimensional alterations in most of the evaluated areas when compared to the standard model. The retentive areas related to the onlay preparation influenced the dimensional stability of the addition and condensation silicone impressions.

Este estudo avaliou as alteracoes dimensionais de silicones de condensacao e adicao usados em duas tecnicas como resultado de areas retentivas de preparos do tipo onlay. Um modelo padrao foi feito e vinte e cinco moldagens realizadas com os dois materiais, atraves da tecnica de dupla impressao ou impressao simultanea, e cada material resultou em 50 modelos de gesso. Imagens digitais foram feitas com um microscopio de luz e as distancias entre os pontos de referencia criados no modelo de gesso foram comparados aos pontos de referencia no modelo padrao. Nos segmentos oclusais, medio-mesial e cervico-mesial, a tecnica de dupla impressao (DI) com silicone de condensacao apresentou valores similares comparados ao modelo padrao. Os valores do silicone de adicao com DI foram similares ao modelo padrao somente no segmento mesio-oclusal. Nos outros segmentos (disto-cervical, medio-distal e disto-oclusal), todos os grupos foram estatisticamente diferentes do controle. Pode- se concluir que moldagens com silicone de adicao e condensacao conferem modelos de gesso com alteracoes dimensionais significativas na maioria das areas avaliadas, quando comparadas ao modelo padrao. As areas retentivas relacionadas ao preparo de onlay influenciaram na estabilidade dimensional das moldagens atraves dos silicones de condensacao e adicao.