Fabrication and performance evaluation of polyethersulfone membranes with varying compositions of polyvinylpyrrolidone and polyethylene glycol for textile wastewater treatment using MBR.

Various industries polluting the water bodies by discharging untreated wastewater directly into the environment and conventional wastewater treatments are often insufficient for effectively treating the pollutants. However, membrane bioreactors (MBRs) offer a promising solution for wastewater treatment where membrane serving as the heart of the system. In this study, polyethersulfone (PES) was used as the membrane material and hydrophilicity of the membranes were tuned up by mixing with hydrophilic additives such as polyethylene glycol (PEG) and polyvinylpyrrolidone (PVP) and the membranes have shown promising results in treating wastewater, particularly in terms of chemical oxygen demand (COD), biochemical oxygen demand (BOD), and color removal. For example, PES-PEG membrane demonstrated COD, BOD, and color removal of 96 %, 94 %, and 92 %, respectively while those were 95 %, 94 %, and 92 %, respectively for PES-based commercial membrane. Although the performances of fabricated membranes were comparable to that of commercial membrane in COD, BOD, and color removal efficiencies, there is room for improvement in permeate yields. Notably, the average permeate efficiency for MBR modules produced with PES-3PEG and PES-5PVP membranes was recorded as 47 % (18 L/m2h) and 13 % (5 L/m2h) respectively of the commercial membrane (38 L/m2h). Despite the variance in permeate yields, the fabricated membranes also showcased significant efficacy in removing microorganisms, a crucial aspect of wastewater treatment. Their performance in this regard proved highly comparable to that of the commercial membrane, emphasizing the potential of these fabricated membranes in enhancing the wastewater treatment.

Microplastics and dye removal from textile wastewater using MIL-53 (Fe) metal-organic framework-based ultrafiltration membranes.

Microplastics (MPs) and other organic matters in textile wastewater have posed a formidable challenge for treatment processes, particularly in the primary stages such as ultrafiltration (UF). UF plays a crucial role in preventing the entry of pollutants into subsequent treatment steps. However, the performance efficiency of UF membranes is compromised by the potential fouling of membrane pores by MPs, dyes and other organic pollutants such as bovine serum albumin (BSA). This study focuses on enhancing UF membrane performance, specifically its antifouling properties, through the development of high-performance membranes using MIL-53(Fe) metal-organic framework (MOF) particles (noted as MIL-53 here). Various concentrations of the MIL-53 (0.05, 0.1, 0.2, and 0.5 wt%) were integrated into the membrane structure through phase inversion process. Streaming zeta potential results confirmed the negatively charged surface of the membranes and their high hydrophilicity was validated through contact angle analysis. FTIR, SEM, EDS, and XRD confirmed the presence of MIL-53 particles on the surface of membranes. The developed membranes were tested for 24 h to assess their antifouling properties, with a subsequent 30-min hydraulic flush to measure their flux recovery ratios. Methylene Blue (MB) dye was used as a cationic dye present in textile wastewater to evaluate the efficiency of the developed membranes in dye removal and the synergistic effects of dye rejection in the presence of organic matters (i.e., MPs and BSA). Since previous studies have not fully addressed the combination of dyes and organic matter, this study thoroughly investigated the effect of particle-type foulants (MPs) and their interactions with dye (MB), as well as water soluble protein-type foulants (BSA) and their interaction with MB. The results indicated that the developed membranes exhibited higher MB rejection when the dye was present with either MP or BSA, along with improved antifouling properties. The optimised UF membrane integrated with 0.1 wt% MIL-53 demonstrated nearly 96% BSA rejection and around 86% MB rejection in the mixed foulant case (BSA-MB). The modified membrane exhibited a substantial increase in water flux from 176 L m-2.h-1 to 327 L m-2.h-1. The findings of this research show the potential of iron-based MOFs in improving the performance of UF membranes and provide a platform for future studies on significant areas such as long-term stability studies and testing with other pollutants found in textile wastewater.

The development of Giant reed biochar for adsorption of Basic Blue 41 and Eriochrome Black T. azo dyes from wastewater.

The textile industry is discharging high concentrations of anionic and cationic azo dyes into the nearby environment, which can cause adverse effects on public health, and the aquatic environment. Therefore, this study aimed to develop giant reed biochar and apply for the removal of Basic blue 41 (BB41) and Eriochrome black T (EBT) azo dyes from water. Characterization techniques such as BET surface area analyzer, Fourier-transform infrared spectroscopy (FT-IR), Raman spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and thermal gravimetric analyzer (TGA) were applied for biochar description. The biochar exhibits a high fixed carbon content (80.4%), a low ash content (3.8%), a large surface area (429.0 m2/g), and good thermal stability. High removal efficiencies of BB41 98.6% and EBT 82.5% were recorded at the specific experimental condition. The experimental data were fitted with the Langmuir isotherm model at R2 0.99 for both dyes whereas the adsorption kinetics revealed the pseudo-second-order kinetics at R2 ∼ 1 and 0.99 for BB41 and EBT, respectively. Furthermore, four regenerations of biochar with adsorption performances of BB41 and EBT dyes were found to be 94.7% and 79.1%, respectively. Finally, this adsorbent can be considered an economically viable material for the removal of synthetic dyes from wastewater systems. In conclusion, the study findings showed that the adsorbent material is promising to apply for water and wastewater treatment but still, the study of adsorption interaction and modifications of the surface functionalities are essential to accommodate multipollutant removal from real water systems.

Deciphering the ecological impact of azo dye pollution through microbial community analysis in water-sediment microcosms.

The uncontrolled release of untreated dyeing wastewater into aquatic ecosystems poses global environmental risks. It alters native microbial communities and associated ecological processes, often going unnoticed. Therefore, the influence of acid orange 7 dye (AO7) contamination on the natural microbial community was investigated using a water-sediment microcosm. Compared to sterile microcosms, complete dye decolourization in natural microcosms showed microbial communities' significance in combating xenobiotic contamination. Proteobacteria dominated the water community, whereas Firmicutes dominated the sediment. AO7 exposure induced notable shifts in the structural composition of the bacterial community in both water and sediment. Niveispirillum exhibited a marked decrease, and Pseudomonas demonstrated a notable increase. The - 9.0 log2FC in Niveispirillum, a nitrogen-fixing bacterium, from 24.4% in the control to 0.1% post-treatment, may disrupt nutrient balance, plant growth, and ecosystem productivity. Conversely, elevated levels of Pseudomonas sp. resulting from azo dye exposure demonstrate its ability to tolerate and bioremediate organic pollutants, highlighting its resilience. Functional profiling via KEGG pathway analysis revealed differential expression patterns under AO7 stress. Specifically, valine, leucine, and isoleucine degradation pathways in water decreased by 52.2%, and cysteine and methionine metabolism ceased expression entirely, indicating reduced protein metabolism and nutrient bioavailability under dye exposure. Furthermore, in sediment, glutathione metabolism ceased, indicating increased oxidative stress following AO7 infusion. However, C5-branched dibasic acid metabolism and limonene and pinene degradation were uniquely expressed in sediment. Decreased methane metabolism exacerbates the effects of global warming on aquatic ecosystems. Further, ceased-butanoate metabolic pathways reflect the textile dye wastewater-induced adverse impact on ecological processes, such as organic matter decomposition, energy flow, nutrient cycling, and community dynamics that help maintain self-purification and ecological balance in river ecosystems. These findings underscore the critical need for more comprehensive environmental monitoring and management strategies to mitigate ecological risks posed by textile dyes in aquatic ecosystems, which remain unnoticed.

A feasible approach for azo-dye (methyl orange) degradation by textile effluent isolate Serratia marcescens ED1 strain for water sustainability: AST identification, degradation optimization and pathway hypothesis.

Methyl orange (MO) is a dye commonly used in the textile industry that harms aquatic life, soil and human health due to its potential as an environmental pollutant. The present study describes the dye degradation ability of Serratia marcescens strain ED1 isolated from textile effluent and characterized by 16S rRNA gene sequence analysis. The laccase property of bacterial isolate was confirmed qualitatively. The effects of various factors (pH, temperature, incubation time, and dye concentration) were evaluated using Response Surface Methodology (RSM). The maximum dye (MO) degradation was 81.02 % achieved at 37 °C temperature and 7.0 pH with 200 mg/L dye concentration after 48 h of incubation. The beef extract, ammonium nitrate and fructose supplementation showed better response during bioremediation among the different carbon and nitrogen sources. The degree of pathogenicity was confirmed through the simple plate-based method, and an antibiotic resistance profile was used to check the low-risk rate of antibiotic resistance. However, the fate and extinct of degraded MO products were analysed through UV-Vis spectroscopy, FT-IR, and GC-MS analysis to confirm the biodegradation potential of the bacterial strain ED1 and intermediate metabolites were identified to propose metabolic pathway. The phytotoxicity study on Vigna radiata L. seeds confirmed nontoxic effect of degraded MO metabolites and indicates promising degradation potential of S. marcescens strain ED1 to successfully remediate MO dye ecologically sustainably.

Environmentally Benign Freeze-dried Biopolymer-Based Cryogels for Textile Wastewater Treatments: A review.

Motivated by sustainability and environmental protection, great efforts have been paid towards water purification and attaining complete decolorization and detoxification of polluted water effluent. Textile effluent, the main participant in water pollution, is a complicated mixture of toxic pollutants which seriously impact human health and the entire ecosystem. Developing effective materials for potential removal of the water contaminants is urgent. Recently, cryogels have been applied in wastewater sectors due to their unique physiochemical attributes(e.g. high surface area, lightweight, porosity, swelling-deswelling, and high permeability). These features robustly affected the cryogel's performance, as adsorbent material, particularly in wastewater sectors. This review serves as a detailed reference to the cryogels derived from biopolymers and applied as adsorbents for the purification of textile drainage. We displayed an overview of: the existing contaminants in textile effluents (dyes and heavy metals), their sources, and toxicity; advantages and disadvantages of the most common treatment techniques (biodegradation, advanced chemical oxidation, membrane filtration, coagulation/flocculation, adsorption). A simple background about cryogels (definition, cryogelation technique, significant features as adsorbents, and the adsorption mechanisms) is also discussed. Finally, the bio-based cryogels dependent on biopolymers such as chitosan, xanthan, cellulose, PVA, and PVP, are fully discussed with evaluating their maximum adsorption capacity.

A novel photocatalytic degradation of mixed dye through chemically synthesized ZnO/Fe2O3 nanocomposite.

This study reported the synthesis and assessment of zinc oxide/iron oxide (ZnO/Fe2O3) nanocomposite as photocatalysts for the degradation of a mixture of methylene red and methylene blue dyes. X-ray diffraction analysis confirms that the crystallite of zinc oxide (ZnO) has a hexagonal wurtzite phase and iron oxide (Fe2O3) has a rhombohedral phase. Fourier Transform Infra-Red spectrum confirms the presence of Zn-O vibration stretching at 428, 480 and 543 cm-1 stretching confirming Fe-O bond formation. Scanning Electron Microscope images exhibited a diverse size and shape of the nanocomposites. The ZnO-90%/Fe2O3-10% and ZnO-10%/Fe2O3-90% nanocomposites reveal good photocatalytic activity with reaction rate constants of 1.5 × 10-2 and 0.66 × 10-2; and 1.3 × 10-2 and 0.60 × 10-2 for methylene blue and methyl red dye respectively. The results revealed that the synthesized ZnO/Fe2O3 nanocomposite is the best catalyst for dye degradation and can be used for industrial applications in future.

Highly effective ultrafiltration membranes based on plastic waste for dye removal from water.

Applicable and low-cost ultrafiltration membranes based on waste polystyrene (WPS) blend and poly vinylidene fluoride (PVDF) were effectively cast on nonwoven support using phase inversion method. Analysis was done into how the WPS ratio affected the morphology and antifouling performance of the fabricated membranes. Cross flow filtration of pure water and various types of polluted aqueous solutions as the feed was used to assess the performance of the membranes. The morphology analysis shows that the WPS/PVDF membrane layer has completely changed from a spongy structure to a finger-like structure. In addition, the modified membrane with 50% WPS demonstrated that the trade-off between selectivity and permeability is met by a significant improvement in the rejection of the membrane with a reduction in permeate flux due to the addition of PVDF. With a water permeability of 50 LMH and 44 LMH, respectively, the optimized WPS-PVDF membrane with 50% WPS could reject 81% and 74% of Congo red dye (CR) and methylene blue dye (MB), respectively. The flux recovery ratio (FRR) reached to 88.2% by increasing PVDF concentration with 50% wt. Also, this membrane has the lowest irreversible fouling (Rir) value of 11.7% and lowest reversible fouling (Rr) value of 27.9%. The percent of cleaning efficiency reach to 71%, 90%, and 85% after eight cycles of humic acid (HA), CR, and MB filtration, respectively, for the modified PS-PVDF (50%-50%). However, higher PVDF values cause the membrane's pores to become clogged, increase the irreversible fouling, and decrease the cleaning efficiency. In addition to providing promising filtration results, the modified membrane is inexpensive because it was made from waste polystyrene, and as a result, it could be scaled up to treat colored wastewater produced by textile industries. PRACTITIONER POINTS: Recycling of plastic waste as an UF membrane for water/wastewater treatment was successfully prepared and investigated. Mechanical properties showed reasonable response with adding PVDF. The modified membrane with 50% PS demonstrated that the trade-off between selectivity and permeability is met by a significant improvement in the rejection.

Valorization of agitated thin film dryer (ATFD)-mixed-salt from textile wastewater for its application in leather manufacturing - a sustainable approach.

The textile industry uses sodium chloride and sodium sulphate during the dyeing process to improve the fixation of dyes on fabrics. After wastewater treatment, the reject stream is dried resulting in mixed salts as solid wastes that are not reused. The leather industry also uses a vast quantity of salt for temporary preservation of skins/hides and as swelling-suppressing agent during the pickling (acidification) process. Thus, an attempt was made to utilize the mixed salt obtained from the textile industry to replace sodium chloride in leather processing. It was found that a 40% w/w offer of ATFD salt was able to preserve the skins for 3 months, which was on par with the preservation carried out using a similar quantity of sodium chloride in conventional preservation process. Likewise, for the pickling process, an offer of 10% w/w ATFD salt provided sufficient deswelling action when compared to conventionally used sodium chloride. However, the residual colour of the mixed salts affected the quality of the leather obtained. To overcome this, an electro-oxidation treatment was carried out to obtain decolourized salts. The COD measurements showed that the 1% solution of ATFD-3 salt reduced from 471 ± 25 to 88 ± 16 ppm. A similar trend was also seen in BOD reduction from 80 ± 12 to 18 ± 10 ppm. These results confirmed that the colour removal could be due to the degradation of the organic contaminants present in the ATFD salt. Thus, the treated ATFD salt can be reused for leather processing without affecting leather quality, thus promoting the concept of circular economy.

Investigation of the performance of the combined moving bed bioreactor-membrane bioreactor (MBBR-MBR) for textile wastewater treatment.

The present study focused on the investigation of the performance of a Moving Bed Bioreactor coupled with a Membrane Bioreactor (MBBR-MBR) on a small scale for textile wastewater treatment. The parameters examined in this study included the removal efficiency of chemical oxygen demand (COD), biochemical oxygen demand (BOD), total suspended solids (TSS), turbidity, color, and heavy metals (HM). The two reactors were operated consecutively and maintained aerobic conditions. The idea is to reduce the pollutant load significantly through the activity of microorganism attached to the biofilm covered carriers in MBBR and successive membrane filtration. The system demonstrated a favorable outcome even in a smaller hydraulic retention time (HRT) of 1 day, which presents a significant advantage in terms of cost and space saving. The removal effectiveness of COD attained a maximum of 92 %, BOD reached a maximum of 95 %, and the color removal performance obtained a removal efficiency of 87 %. Furthermore, the treatment showed remarkable efficiency in removing up to 100 % of TSS and 96 % of turbidity. Additionally, an evaluation was conducted on the elimination of heavy metals, including Zinc (Zn), Lead (Pb), Chromium (Cr), and Iron (Fe). The efficacy of removing these HMs was found to exceed 85 %. All these favorable outcomes contribute to the improvement of effluent quality, mitigation of contamination hazards, and fouling reduction.

Accelerated mineralization of textile wastewater under 222 nm irradiation from Kr/Cl2 excilamp: an environmentally friendly and energy efficient approach.

The textile dyeing and manufacturing industry is the major producer of significant amounts of wastewater that contain persistent substances such as azo dyes that require adequate remediation measures. Far ultraviolet at 222 nm light may provide an advantage for contaminants degradation as compared to conventional UV sources (254 nm). In this paper, the degradation of reactive black 5 (RB5) in artificial wastewater has been performed using a 222 nm Kr/Cl2 excimer source under direct photolysis and an advanced oxidation process using TiO2/H2O2. The solution pH, catalyst concentration, 222 nm intensity, initial concentration of dye, and addition of H2O2 influence the degradation rate constant. The molar absorption coefficient, quantum yield of RB5 at 222 nm and the electrical energy per order (EEO) from different treatment methods have been reported. RB5 shows 1.26 times higher molar absorption at 222 nm than at 254 nm. The EEO for excimer-222/H2O2 ( ∼ 13 kWh/m3) is five times lower than that of the excimer-222/TiO2 process, which makes the process energy efficient. The degradation of wastewater has been carried out at three distinct pH values (2, 6, and 10), and the pH level of 10 exhibited the highest degree of degradation. The degradation rate in the alkaline medium is 8.27 and 2.05 times higher than in the acidic or ambient medium. Since textile effluent is highly alkaline, this result is significant, as no neutralization of the wastewater is required, and direct treatment is possible. A possible degradation pathway has been established based on Fourier transform infrared spectroscopy (FTIR) and high resolution mass spectroscopy (HRMS) analysis. The phytotoxicity of the treated wastewater has also been evaluated for its suitability for reuse in agriculture. The study reveals that the excimer-222/H2O2 treated wastewater significantly enhanced the germination percentage of Raphanus sativus seed (97%) compared to dye wastewater-grown seeds (75%). This work offers crucial information for future studies on the direct and indirect photolysis of azo dyes, as well as insight into the process of RB5 degradation under Kr/Cl2 excimer radiation.

Bio-based composite from chitosan waste and clay for effective removal of Congo red dye from contaminated water: Experimental studies and theoretical insights.

Water pollution due to dyes in the textile industry is a serious environmental problem. During the finishing stage, Congo red (CR) dye, water-soluble, is released into wastewater, polluting the water body. This study explores the effectiveness of utilizing a composite composed of Safi raw clay and chitosan to remove an anionic dye from synthetic wastewater. The chitosan was extracted from crab shells. Its removal performance was compared to that of natural clay. Both the composite and raw clay were used to remove target pollutant. The effects of the chitosan load in the composite, size particles, initial dye concentration, contact time, pH, and temperature on the dye's elimination were tested in batch modes. The composite with 30% (w/w) of chitosan exhibited the highest dye removal. At pH 2, an adsorption capacity of 84.74 mg/g was achieved, indicating that the grafting of the polymer onto clay surface enhances its efficacity and stability in acidic environments. This finding was supported by characterization data obtained from X-ray diffraction (XRD), scanning electron microscopy (SEM), dispersive X-ray spectroscopy (EDX), and Fourier transform infrared (FT-IR) analyses. Under optimized conditions of 20 mg dose, pH 2, 30 min of reaction time, and 20 mg/L of dye concentration, about 92% of dye removal was achieved. The Langmuir isotherm model represents dye adsorption by the composite, while dye removal was controlled by pseudo-second-order model. Thermodynamic data of the adsorption (ΔH = +8.82 kJ/mol; ΔG <0) suggested that the dye adsorption was spontaneous and endothermic. The findings provide insights into the dye elimination by the adsorbent, indicating that the removal occurred via attractive colombic forces, as confirmed by density functional theory (DFT) analysis. Overall, the composite of natural clays and chitosan waste is a promising and innovative adsorbent for treating wastewater containing recalcitrant dyes.

Microalgal and activated sludge processing for biodegradation of textile dyes.

The textile industry contributes substantially to water pollution. To investigate bioremediation of dye-containing wastewater, the decolorization and biotransformation of three textile azo dyes, Red HE8B, Reactive Green 27, and Acid Blue 29, were considered using an integrated remediation approach involving the microalga Chlamydomonas mexicana and activated sludge (ACS). At a 5 mg L-1 dye concentration, using C. mexicana and ACS alone, decolorization percentages of 39%-64% and 52%-54%, respectively, were obtained. In comparison, decolorization percentages of 75%-79% were obtained using a consortium of C. mexicana and ACS. The same trend was observed for the decolorization of dyes at higher concentrations, but the potential for decolorization was low. The toxic azo dyes adversely affect the growth of microalgae and at high concentration 50 mg L-1 the growth rate inhibited to 50-60% as compared to the control. The natural textile wastewater was also treated with the same pattern and got promising results of decolorization (90%). Moreover, the removal of BOD (82%), COD (72%), TN (64%), and TP (63%) was observed with the consortium. The HPLC and GC-MS confirm dye biotransformation, revealing the emergence of new peaks and the generation of multiple metabolites with more superficial structures, such as N-hydroxy-aniline, naphthalene-1-ol, and sodium hydroxy naphthalene. This analysis demonstrates the potential of the C. mexicana and ACS consortium for efficient, eco-friendly bioremediation of textile azo dyes.

Efficacy and mechanism of enhanced Sb(V) removal from textile wastewater using ferric flocs in aerobic biological treatment.

Antimony contamination from textile industries has been a global environmental concern and the existing treatment technologies could not reduce Sb(V) to meet the discharge standards. To overcome this shortcoming, ferric flocs were introduced to expedite the biological process for enhanced Sb(V) removal in wastewater treatment plant (WWTP). For this purpose, a series of laboratorial-scale sequential batch reactor activated sludge processes (SBRs) were applied for Sb(V) removal with varied reactor conditions and the transformation of Fe and Sb in SBR system was investigated. Results showed a significant improvement in Sb(V) removal and the 20 mg L-1 d-1 iron ions dosage and iron loss rate was found to be only 15.2%. The influent Sb(V) concentration ranging 153-612 µg L-1 was reduced to below 50 µg L-1, and the maximum Sb(V) removal rate of the enhanced system reached about 94.3%. Furthermore, it exhibited high stability of Sb(V) removal in the face of antimonate load, Fe strike and matrix change of wastewater. Sludge total Sb determination and capacity calculation revealed decreasing in Sb adsorption capacity and desorption without fresh Fe dosage. While sludge morphology analysis demonstrated the aging and crystallization of iron hydroxides. These results verify the distinct effects of fresh iron addition and iron aging on Sb(V) removal. High-throughput gene pyrosequencing results showed that the iron addition changed microbial mechanisms and effect Fe oxidized bacterial quantity, indicating Sb(V) immobilization achieved by microbial synergistic iron oxidation. The present study successfully established a simple and efficient method for Sb(V) removal during biological treatment, and the modification of biological process by iron supplement could provide insights for real textile wastewater treatment.

Performance of a high-rate membrane bioreactor for energy-efficient treatment of textile wastewater.

High-rate membrane bioreactors (MBR), where the wastewater undergoes partial oxidation due to the applied short sludge retention time (SRT) and hydraulic retention time (HRT) values, retain the majority of the organic substances in the sludge through growth and biological flocculation. Thus, a raw material source with a high biomethane production potential is created for the widespread use of circular economy or energy-neutral plants in wastewater treatment. While high-rate MBRs have been successfully employed for energy-efficient treatment of domestic wastewater, there is a lack of research specifically focused on textile wastewater. This study aimed to investigate the textile wastewater treatment and organic matter recovery performances of an aerobic MBR system containing a hollow fiber ultrafiltration membrane with a 0.04 µm pore diameter. The system was initially operated at short SRTs (5 and 3 d) and different SRT/HRT ratios (5, 10, and 20) and subsequently at high-rate conditions (SRT of 0.5-2 d and HRT of 1.2-9.6 h) which are believed to be the most limiting conditions tested for treatment of real textile wastewater. The results showed that chemical oxygen demand (COD) removal averaged 77% even at SRT of 0.5 d and HRT of 1.2 h. Slowly biodegradable substrates and soluble microbial products (SMP) accumulated within the MBR at SRT of 0.5 and 1 d, which resulted in decreased sludge filterability. The observed sludge yield (Yobs) exhibited a considerable increase when SRT was reduced from 5 to 1 d. On the other hand, the SRT/HRT ratio displayed a decisive effect on the energy requirement for aeration.

Accessible Eco-Friendly Method for Wastewater Removal of the Azo Dye Reactive Black 5 by Reusable Protonated Chitosan-Deep Eutectic Solvent Beads.

A novel approach to enhance the utilization of low-cost and sustainable chitosan for wastewater remediation is presented in this investigation. The study centers around the modification of chitosan beads using a deep eutectic solvent composed of choline chloride and urea at a molar ratio of 1:2, followed by treatment with sulfuric acid using an impregnation accessible methodology. The effectiveness of the modified chitosan beads as an adsorbent was evaluated by studying the removal of the azo dye Reactive Black 5 (RB5) from aqueous solutions. Remarkably, the modified chitosan beads demonstrated a substantial increase in adsorption efficiency, achieving excellent removal of RB5 within the concentration range of 25-250 mg/L, ultimately leading to complete elimination. Several key parameters influencing the adsorption process were investigated, including initial RB5 concentration, adsorbent dosage, contact time, temperature, and pH. Quantitative analysis revealed that the pseudo-second-order kinetic model provided the best fit for the experimental data at lower dye concentrations, while the intraparticle diffusion model showed superior performance at higher RB5 concentration ranges (150-250 mg/L). The experimental data were successfully explained by the Langmuir isotherm model, and the maximum adsorption capacities were found to be 116.78 mg/g at 298 K and 379.90 mg/g at 318 K. Desorption studies demonstrated that approximately 41.7% of the dye could be successfully desorbed in a single cycle. Moreover, the regenerated adsorbent exhibited highly efficient RB5 removal (80.0-87.6%) for at least five consecutive uses. The outstanding adsorption properties of the modified chitosan beads can be attributed to the increased porosity, surface area, and swelling behavior resulting from the acidic treatment in combination with the DES modification. These findings establish the modified chitosan beads as a stable, versatile, and reusable eco-friendly adsorbent with high potential for industrial implementation.

Non-target and target screening and risk assessment of per- and polyfluoroalkyl substances in textile wastewater and receiving river.

Textile industry uses varieties of chemicals including per- and polyfluoroalkyl substances (PFAS). PFAS are known to be persistent and incompletely removed in wastewater treatment plants (WWTPs). So far, little is known about what types of PFAS are used in the textile industry and their potential risks. Here we investigated PFAS in two WWTPs and a receiving river of a textile industrial park in Guangxi, China, by using both target and non-target analyses over a two-year period. The target analysis identified 11 specific PFAS, while the non-target analysis revealed a list of 648 different PFAS, including both legacy and emerging substances. Notably, perfluorooctanoic acid (PFOA) was still the most prevalent compound detected. Of particular concern was the finding that the investigated WWTPs, which employs an A/O (Anaerobic/Aerobic) process, exhibited a poor removal efficiency for PFAS. The average removal rate was only 22.0 %, indicating that the current treatment processes are inadequate in effectively mitigating PFAS contamination. Correlation analysis further highlighted the potential for PFAS to be transported from WWTPs to the receiving river, revealing a significant and strong positive correlation between the PFAS in the WWTP effluent and those of the river. Perfluorooctanesulfonic acid (PFOS) and two emerging PFAS (DTXSID30240816 and DTXSID90240817) were identified to have high ecological risks in the receiving river. Notably, these two emerging PFAS are homologues, and their presence in WWTPs has been poorly reported. The findings highlight the wide use and persistence of PFAS in current textile WWTPs, indicating potential long term risks to the receiving environment.

Emerging pollutants in textile wastewater: an ecotoxicological assessment focusing on surfactants.

Water and several chemicals, including dyestuffs, surfactants, acids, and salts, are required during textile dyeing processes. Surfactants are harmful to the aquatic environment and induce several negative biological effects in exposed biota. In this context, the present study aimed to assess acute effects of five surfactants, comprising anionic and nonionic classes, and other auxiliary products used in fiber dyeing processes to aquatic organisms Vibrio fischeri (bacteria) and Daphnia similis (cladocerans). The toxicities of binary surfactant mixtures containing the anionic surfactant dodecylbenzene sulfonate + nonionic fatty alcohol ethoxylate and dodecylbenzene sulfonate + nonionic alkylene oxide were also evaluated. Nonionic surfactants were more toxic than anionic compounds for both organisms. Acute nonionic toxicity ranged from 1.3 mg/L (fatty alcohol ethoxylate surfactant) to 2.6 mg/L (ethoxylate surfactant) for V. fischeri and from 1.9 mg/L (alkylene oxide surfactant) to 12.5 mg/L (alkyl aryl ethoxylated and aromatic sulfonate surfactant) for D. similis, while the anionic dodecylbenzene sulfonate EC50s were determined as 66.2 mg/L and 19.7 mg/L, respectively. Both mixtures were very toxic for the exposed organisms: the EC50 average in the anionic + fatty alcohol ethoxylate mixture was of 1.0 mg/L ± 0.11 for V. fischeri and 4.09 mg/L ± 0.69 for D. similis. While the anionic + alkylene oxide mixture, EC50 of 3.34 mg/L for D. similis and 3.60 mg/L for V. fischeri. These toxicity data suggested that the concentration addition was the best model to explain the action that is more likely to occur for mixture for the dodecylbenzene sulfonate and alkylene oxide mixtures in both organisms. Our findings also suggest that textile wastewater surfactants may interact and produce different responses in aquatic organisms, such as synergism and antagonism. Ecotoxicological assays provide relevant information concerning hazardous pollutants, which may then be adequately treated and suitably managed to reduce toxic loads, associated to suitable management plans.

Application of montmorillonite/octadecylamine nanoparticles in the removal of textile dye from aqueous solutions: Modeling, kinetic, and equilibrium studies.

In the study, the proliferation of industries has been associated with an increase in the production of industrial wastewater and subsequent environmental pollution, wherein dyes emerge as prominent pollutants. The characteristics of nanoclay modified with octadecylamine, were elucidated throughvarious techniques, including Field Emission Scanning Electron Microscopy/Energy Dispersive Spectroscopy (FE-SEM/EDS), Fourier Transform Infrared Spectroscopy (FTIR), Thermogravimetric Analysis (TGA), X-ray Diffraction (XRD), and Brunauer-Emmett-Teller Surface Area Analysis (BET). The research delved into the impact of variables such as pH, initial dye concentration, adsorbent dose, temperature, and ultrasonication time on the removal of Acid Black 1 (AB1) through an ultrasonic process, employing a central composite design (CCD). Optimal conditions for the adsorption process were determined: pH at 5.46, adsorbent mass at 4 mg/30 mL, initial dye concentration at 20 mg/L, ultrasound time at 20 min, and temperature at 50 °C, resulting in a remarkable 96.49% adsorption efficiency. The fitting of experimental equilibrium data to different isotherm models, including Langmuir, Freundlich, and Temkin, indicated thatthe Freundlich model was the most suitable. Analysis of the adsorption data with various kinetic models such as pseudo-first and second-order models, and intraparticle diffusion models, revealed the applicability of the second-order equation model. A thermodynamic study unveiled that the adsorption process was spontaneous and endothermic. In conclusion, the study highlights the significant capability ofmontmorillonite nanoclay modified with octadecylamine in removing AB1 dye, rendering it a viable option for wastewater treatment.

New insights on the decolorization of waste flows by Saccharomyces cerevisiae strain - A systematic review.

One of the common causes of water pollution is the presence of toxic dye-based effluents, which can pose a serious threat to the ecosystem and human health. The application of Saccharomyces cerevisiae (S. cerevisiae) for wastewater decolorization has been widely investigated due to their efficient removal and eco-friendly treatments. This review attempts to create an awareness of different forms and methods of using Saccharomyces cerevisiae (S. cerevisiae) for wastewater decolorization through a systematic approach. Overall, some suggestions on classification of dyes and related environmental/health problems, and treatment methods are discussed. Besides, the mechanisms of dye removal by S. cerevisiae including biosorption, bioaccumulation, and biodegradation and cell immobilization methods such as adsorption, covalent binding, encapsulation, entrapment, and self-aggregation are discussed. This review would help to inspire the exploration of more creative methods for applications and modification of S. cerevisiae and its further practical applications.