RESUMO
Color stability is crucial for dental materials to ensure they perfectly match a patient's tooth color. This is particularly challenging in photoresist-based additive manufacturing. Although some studies have addressed this issue, the exact causes of discoloration and ways to minimize it remain unclear. In this study, the intrinsic causes of discoloration in materials intended for 3D printing are investigated by examining thin-film samples (1200 µm) of various compositions, which are stored under different conditions. The samples are evaluated by measuring the UV-Vis absorption spectra at regular intervals to monitor changes. The findings reveal that both the composition of the formulations and the storage conditions significantly influence the discoloration behavior. Furthermore, methods have been developed to reduce or completely prevent discoloration. The use of photoinitiators with sterically demanding benzoyl moieties, as well as the addition of stabilizers, effectively decreases the intensity of emerging discoloration. Furthermore, incorporating the oxidizing agent cumene hydroperoxide (CHP) results in materials that maintain color stability.
RESUMO
AIM: This study aimed to compare the clinical outcomes of polymethyl methacrylate (PMMA) and urethane dimethacrylate (UDMA) as materials for fixed provisional restorations, focusing on handling properties, chair time, and periodontal outcomes, due to their prevalent use in dental practice. MATERIALS AND METHODS: A comparative clinical study was conducted with 150 patients at the Department of Fixed Prosthodontics, Damascus University, Damascus, Syria. Patients undergoing prosthetic treatments with crowns and bridges received two fixed provisional restorations using a direct approach. The first, made immediately after abutment preparation, used PMMA. The second, created post-clinical try-in of the final restoration, utilized UDMA. Both restorations were maintained for one week. We assessed chair time, handling properties via the Visual Analog Scale (VAS), and periodontal health using the Plaque Index and Gingival Index. The Kolmogorov-Smirnov test was used to assess data normality. Differences between the two groups in the outcome variables were analyzed using the Mann-Whitney U test. The level of significance was set at (P < 0.05). RESULTS: The handling properties of chemically activated PMMA resin were superior to those of light-activated UDMA resin. However, UDMA resin outperformed in terms of chair time and periodontal outcomes. The mean chair time was 9.45 ± 1.01 minutes for PMMA and 4.40 ± 0.77 minutes for UDMA. Mild gingivitis or plaque accumulation was observed in 57.3% of PMMA restorations and 44.0% of UDMA restorations. Moderate gingivitis and plaque accumulation were noted in 42.7% of PMMA restorations, while 56.0% of UDMA restorations showed no plaque accumulation or gingival inflammation. CONCLUSION: Chemically activated PMMA resin offers excellent handling properties, whereas light-activated UDMA resin provides advantages in chair time and periodontal health, making it a preferable choice for provisional restorations. Limitations and future research: The study was limited to short-term outcomes and did not assess the long-term durability of the restorations or their aesthetic impact on patient satisfaction. Further studies are recommended to evaluate the long-term performance of these materials, their cost-effectiveness, and their aesthetic outcomes to provide a more comprehensive understanding of their clinical utility.
RESUMO
This study aims to develop multi-functional bio-safe dental resin composites with capabilities for mineralization, high in vitro biocompatibility, and anti-biofilm properties. To address this issue, experimental resin composites consisting of UDMA/TEGDMA-based dental resins and low quantities (1.9, 3.8, and 7.7 vol%) of 45S5 bioactive glass (BAG) particles were developed. To evaluate cellular responses of resin composites, MC3T3-E1 cells were (1) exposed to the original composites extracts, (2) cultured directly on the freshly cured resin composites, or (3) cultured on preconditioned composites that have been soaked in deionized water (DI water), a cell culture medium (MEM), or a simple HEPES-containing artificial remineralization promotion (SHARP) solution for 14 days. Cell adhesion, cell viability, and cell differentiation were, respectively, assessed. In addition, the anti-biofilm properties of BAG-loaded resin composites regarding bacterial viability, biofilm thickness, and biofilm morphology, were assessed for the first time. In vitro biological results demonstrated that cell metabolic activity and ALP expression were significantly diminished when subjected to composite extracts or direct contact with the resin composites containing BAG fillers. However, after the preconditioning treatments in MEM and SHARP solutions, the biomimetic calcium phosphate minerals on 7.7 vol% BAG-loaded composites revealed unimpaired or even better cellular processes, including cell adhesion, cell proliferation, and early cell differentiation. Furthermore, resin composites with 1.9, 3.8, and 7.7 vol% BAG could not only reduce cell viability in S. mutans biofilm on the composite surface but also reduce the biofilm thickness and bacterial aggregations. This phenomenon was more evident in BAG7.7 due to the high ionic osmotic pressure and alkaline microenvironment caused by BAG dissolution. This study concludes that multi-functional bio-safe resin composites with mineralization and anti-biofilm properties can be achieved by adding low quantities of BAG into the resin system, which offers promising abilities to mineralize as well as prevent caries without sacrificing biological activity.
RESUMO
OBJECTIVE: To evaluate properties of fiber-reinforced-composites (FRC) containing Bis-EMA/UDMA monomers but identical dispersed phase (60% wt BaSi glass power +10% wt E-glass fibre). METHODS: A control (Group A), monomer mixture comprising 60% Bis-GMA, 30% TEGDMA, and 10% PMMA (typical FRC monomers) was used. The following monomer mass fractions were mixed: 50% bis-GMA plus 50% of different ratios of Bis-EMA+UDMA to produce consistent formulations (Groups B-E) of workable viscosities was also studied. Flexural strength (FS), fracture toughness (KIC), water sorption (SP), solubility (SL) and hygroscopic expansion (HE) were measured. FS and KIC specimens were stored for 1, 7 d, and 30 d in water at 37 °C. SP/SL specimens were water-immersed for 168d, weighed at intervals, then dried for 84 d at 37 °C. To analyze differences in FS, and KIC, a two-way ANOVA and Tukey post-hoc tests (α = 0.05) were conducted. For SP/SL, and HE, one-way ANOVA with subsequent Tukey post-hoc tests (α = 0.05) were utilized. RESULTS: FS and KIC for groups A, D, E decreased progressively after 1 d. Groups B and C (highest amounts of Bis-EMA) did not decrease significantly. The modified matrix composites performed significantly better than the control group for SP and HE. The control group outperformed the experimental composites only for SL with up to 250% higher SL for group E (6.9 µg/mm) but still below the maximum permissible threshold of 7.5 µg/mm. SIGNIFICANCE: EXPERIMENTAL: composites with highest amounts of Bis-EMA showed improved hydrolytic stability and overall enhancement in several clinically-relevant properties. This makes them potential candidates for alternative matrices to a semi-interpenetrating network in fiber-reinforced composites.
Assuntos
Resinas Compostas , Vidro , Poliuretanos , Bis-Fenol A-Glicidil Metacrilato , Teste de Materiais , Metacrilatos , Ácidos Polimetacrílicos , Polietilenoglicóis , ÁguaRESUMO
This study analyse the type of release kinetic of specific monomers from dental resin composites containing various fluoride-doped calcium phosphates. The release behavior of urethane dimethacrylate (UDMA), ethoxylated bisphenol-A dimethacrylate (bis-EMA) and 1.6-hexanediol ethoxylate diacrylate (HEDA) was evaluated over a period of 35 days. Two tailored calcium phosphates doped with different concentrations of fluoride salts (VS10% and VS20%) were prepared and incorporated in the dimethacrylate matrix at various concentrations to generate a range of experimental composites. The release kinetics were characterized using mathematical models such as zero-order, first-order, Peppas and Higuchi models. The results showed that the first-order model best described the release kinetics. UDMA and HEDA exhibited significant differences in release compared to bis-EMA from day 1, while no significant differences were observed between UDMA and HEDA, except on day 35, when UDMA exhibited a higher release rate than HEDA. When comparing the release of each monomer, VS20-R20% had the highest total release percentage, with 3.10 ± 0.25%, whereas the composite VS10-R5% showed the lowest release percentage, with a total of 1.66 ± 0.08%. The release kinetics were influenced by the composition of the resin composites and the presence of calcium fluoride and sodium fluoride in the calcium phosphate played a role in the maximum amounts of monomer released. In conclusion, the release of monomers from the tested resin composites followed a first-order kinetic behaviour, with an initial rapid release that decreased over time. The composition of the resin monomers and the presence of fluoride salts influenced the release kinetics. The VS10-R5% and VS10-R10% resin composites exhibited the lowest total monomer release, suggesting its potential favourable composition with reduced monomer elution. These findings contribute to understanding the release behavior of dental resin composites and provide insights for the development of resin-based bioactive dental materials.
RESUMO
An accurate and dimensionally stable trial denture base is required for a successful denture. The aim of this in vitro study was to assess the dimensional stability of a light-activated urethane dimethacrylate (UDMA) visible light cure (VLC) denture base with three fabrication techniques and different curing cycles. Forty-five VLC denture base samples were divided evenly into three groups. Group A used a conventional fabrication technique with a curing cycle of 5 min. Group B used a modified fabrication technique with two 4-min curing cycles. Group C used a multi-step fabrication technique with three curing cycles (4 min, plus 4 min, plus 2 min). The samples were sectioned and observed under a stereomicroscope to measure the discrepancy between the sample and the master cast. The mean dimensional discrepancy (mm) at the molar region at mid-palate, after 24 h in Group A, B and C was 0.790 mm, 0.741 mm and 0.379 mm, respectively; at the right ridge crest, it was 0.567, 0.408 and 0.185, while at the left ridge crest it was 0.475, 0.331 and 0.125, respectively. Statistical analysis showed significantly different dimensional discrepancies among the groups at all three sites; right ridge crest (F = 93.54, p < 0.001), left ridge crest (F = 105.96, p < 0.001) and mid-palate (F = 125.53, p < 0.001). Within the limitations of this laboratory study, it can be concluded that the denture base using a multi-step fabrication technique with three curing cycles provides better adaptation than the conventional technique. The significance of the study is that clinicians should consider performing denture base fabrication using a multi-step technique to enhance adaptation and hence the stability of the dentures for patients.
RESUMO
In this work, the effects of femtosecond laser irradiation and doping with plasmonic gold nanorods on the degree of conversion (DC) of a urethane dimethacrylate (UDMA)-triethylene glycol dimethacrylate (TEGDMA) nanocomposite were investigated. The UDMA-TEGDMA photopolymer was prepared in a 3:1 weight ratio and doped with dodecanethiol- (DDT) capped gold nanorods of 25 × 75 or 25 × 85 nm nominal diameter and length. It was found that the presence of the gold nanorods alone (without direct plasmonic excitation) can increase the DC of the photopolymer by 6-15%. This increase was found to be similar to what could be achieved with a control heat treatment of 30 min at 180 °C. It was also shown that femtosecond laser impulses (795 nm, 5 mJ pulse energy, 50 fs pulse length, 2.83 Jcm-2 fluence), applied after the photopolymerization under a standard dental curing lamp, can cause a 2-7% increase in the DC of undoped samples, even after thermal pre-treatment. The best DC values (12-15% increase) were obtained with combined nanorod doping and subsequent laser irradiation close to the plasmon resonance peak of the nanorods (760-800 nm), which proves that the excited plasmon field can directly facilitate double bond breakage (without thermoplasmonic effects due to the short pulse length) and increase the crosslink density independently from the initial photopolymerization process.
Assuntos
Nanocompostos , Nanotubos , Ouro , LasersRESUMO
BACKGROUND: The choice of the restorative resin material to be used in pediatric dentistry is of a great importance due to the cytotoxic effects caused by residual monomers. In this study, it was aimed to investigate the amount of residual monomer released over time from different resin-based restorative materials, which are widely used in pediatric dentistry, by using high performance liquid chromatography with photodiode array detector (HPLC-PDA). METHODS: The compomers in all colors (Twinky Star and Glasiositte A2), two composites with different hybrid properties (Arabesk-GrandioSO), and RMGIC (Ionolux) samples with 2 × 5 mm diameters were prepared. The samples were polymerized with an LED light unit (CELALUX 2, VOCO, Cuxhaven, Germany) and then finishing-polishing procedures were applied. A total of 156 samples were obtained, 13 samples in each of the 12 groups. The amount of residual monomer (BIS-GMA; HEMA, TEGDMA, UDMA) (µg/mL) released into the 75% ethanol solution was determined at different times, (1st hour, 1st, 7th, 14th, and 21st day) by using HPLC-PDA. RESULTS: The residual monomer release continued on day 21 and BIS-GMA was the most released monomer in all groups. HEMA release showed a maximum increase in all the materials at day 7. The highest amount of residual monomer was detected in the gold-colored compomer. HEMA and BIS-GMA release from RMGIC was less than others in all time frames. CONCLUSIONS: The color and composition of resin-based restorative materials affect the amount of residual monomer. Pediatric dentists should prefer gold-colored compomers less than others as a restorative material, especially in deep cavities. More studies are needed about the subject.
Assuntos
Compômeros , Odontopediatria , Bis-Fenol A-Glicidil Metacrilato/química , Criança , Resinas Compostas/química , Materiais Dentários/química , Ouro , Humanos , Teste de Materiais , Metacrilatos/química , Polimerização , Ácidos Polimetacrílicos/químicaRESUMO
Bisphenol A-glycidyl methacrylate (bis-GMA) and urethane dimethacrylate (UDMA) are usually combined with low-viscosity monomers to obtain more desirable viscosity, handling characteristics and general properties. The present study determined the flexural strength (FS), flexural modulus (FM), diametral tensile strength (DTS), and hardness (HV) of five matrices and composites based on these resins. The polymerization shrinkage stress (PSS) was also studied for the composites. The polymer matrices were formed using bis-GMA and UDMA. TEGDMA, HEMA and HDDMA acted as co-monomers. The composites had 45 wt.% of filler content. The highest FS and FM were obtained from the UDMA/bis-GMA/TEGDMA/HEMA matrix and the composite (matrix + filler). The best DTS values were obtained from the UDMA/bis-GMA/HEMA matrix and the composite. One of the lowest values of FS, FM, and DTS was obtained from the UDMA/bis-GMA/HDDMA matrix and the composite. All the composites demonstrated similar hardness values. The lowest polymerization shrinkage stress was observed for the UDMA/bis-GMA/TEGDMA/HEMA composite, and the highest PSS was observed for the UDMA/bis-GMA/TEGDMA/HDDMA composite. The addition of HEMA had a positive effect on the properties of the tested materials, which may be related to the improved mobility of the bis-GMA and UDMA monomers.
RESUMO
OBJECTIVE: This study is focused on testing experimental rapid prototyping materials for occlusal splints made from Urethandimethacrylate (UDMA) and Urethanmethacrylate (UMA). METHODS: Materials were mixed from UDMA and UMA in ratios of 1.0:0.0, 0.75:0.25, 0.5:0.5, 0.25:0.75 and 0.0:1.0. Specimens were printed using digital light processing (DLP). After post-processing, the specimens underwent testing on flexural strength, modulus of elasticity, hardness, wear behavior, surface roughness, gloss and color stability. All tests were performed after 24 h (baseline) and 10 days of water storage (aging). Splints underwent cyclic pull-off and insertion testing, which was alongside simulated using finite element analysis. RESULTS: The mechanical properties were significantly influenced by changes in the UDMA:UMA ratio. Statistical analysis revealed that increased amounts of UMA correlated with a decrease in flexural strength (92.0 to 30.7 MPa), modulus of elasticity (2.4 to 0.6 GPa), hardness (155.1 to 102.0 N/mm2) and wear resistance (-1394.9 to -1742.1 µm). Materials with higher amounts of UMA were also more likely to be influenced by water storage. Specimens with 75% and 100% UMA content were partly not analyzable due to soft consistency. Optical properties showed only minor influence from UMA content and aging. Differences in surface roughness (3.9 to 2.4 µm) and color stability were insignificant. Gloss was partly influenced by the UDMA:UMA ratio and water storage. Mean survival rates for cyclic pull-off and insertion testing ranged from 2537 to 23,857 cycles. A correlation between the amount of UMA and survival rates was observed. SIGNIFICANCE: The addition of up to 25% UMA showed promising results, complying with clinical standards and delivering acceptable results in the cyclic pull-off and insertion test. Further investigation on increments between 0 and 25% UMA could help to find an optimum.
Assuntos
Resinas Compostas , Resistência à Flexão , Elasticidade , Dureza , Teste de Materiais , Propriedades de SuperfícieRESUMO
Most of the dental materials available on the market are still based on traditional monomers such as bisphenol A-glycidyl methacrylate (Bis-GMA), urethane dimethacrylate (UDMA), triethyleneglycol dimethacrylate (TEGDMA), and ethoxylated bisphenol-A dimethacrylate (Bis-EMA). The interactions that arise in the monomer mixture and the characteristics of the resulting polymer network are the most important factors, which define the final properties of dental materials. The use of three different monomers in proper proportions may create a strong polymer matrix. In this paper, fourteen resin materials, based on urethane dimethacrylate with different co-monomers such as Bis-GMA or Bis-EMA, were evaluated. TEGDMA was used as the diluting monomer. The flexural strength (FS), diametral tensile strength (DTS), and hardness (HV) were determined. The impacts of material composition on the water absorption and dissolution were evaluated as well. The highest FS was 89.5 MPa, while the lowest was 69.7 MPa. The median DTS for the tested materials was found to range from 20 to 30 MPa. The hardness of the tested materials ranged from 14 to 16 HV. UDMA/TEGDMA matrices were characterized by the highest adsorption values. The overall results indicated that changes in the materials' properties are not strictly proportional to the material's compositional changes. The matrices showed good properties when the composite contained an equal mixture of Bis-GMA/Bis-EMA and UDMA or the content of the UDMA monomer was higher.
RESUMO
Concerns regarding unbound monomers in dental composites have increased with the increased usage of these materials. This study assessed the biological effects of urethane dimethacrylate (UDMA), a common monomer component of dental composite resins, on the cariogenic properties of Streptococcus mutans. Changes in the growth rate, biofilm formation, interaction with saliva, surface hydrophobicity, adhesion, glucan synthesis, sugar transport, glycolytic profiles, and oxidative- and acid-stress tolerances of S. mutans were evaluated after growing the cells in the presence and absence of UDMA. The results indicated that UDMA promotes the adhesion of S. mutans to the underlying surfaces and extracellular polysaccharide synthesis, leading to enhanced biofilm formation. Furthermore, UDMA reduced the acid tolerance of S. mutans, but enhanced its tolerance to oxidative stress, thus favoring the early stage of biofilm development. UDMA did not significantly affect the viability or planktonic growth of cells, but diminished the ability of S. mutans to metabolize carbohydrates and thus maintain the level of intracellular polysaccharides, although the tendency for sugar transport increased. Notably, UDMA did not significantly alter the interactions of bacterial cells with saliva. This study suggests that UDMA may potentially contribute to the development of secondary caries around UDMA-containing dental materials by prompting biofilm formation, enhancing oxidative tolerance, and modulating carbon flow.
RESUMO
This study intends to obtain a kind of polymer-infiltrated ceramic-network (PICN) composite with improved performance for dental restoration. Porous ceramic network was prepared via compressing feldspar powders, followed by resin infiltration using Bis-GMA/TEGDMA or UDMA/TEGDMA mixtures to obtain PICN composites after thermocuring. The sintering parameters (temperature, duration) for the formation of feldspathic network with proper porosity were investigated. The ratios of resin mixtures were adjusted to optimize the infiltration. Comprehensive characterizations were conducted on the porosity and the shrinkage of preformed ceramic-networks, the viscosity of resin mixtures and their infiltration into the ceramic networks, as well as, flexural properties, Vickers hardness and wear resistance of the final PICN composites. It turned out that the PICN composite prepared from Bis-GMA/TEGDMA (6:4) achieved the best performance among all the samples, which is expected to be a suitable material for computer-aided design/computer-aided manufacturing (CAD/CAM) dental restorative applications.
Assuntos
Silicatos de Alumínio , Polímeros , Cerâmica , Resinas Compostas , Desenho Assistido por Computador , Análise do Estresse Dentário , Teste de Materiais , Compostos de PotássioRESUMO
Urethane dimethacrylate (UDMA) is a dimethacrylate-based resin monomer that can react with other related monomers and inorganic particles, causing hydrophobic polymerization through cross-linking upon light activation. UDMA polymers are commonly used for the reconstruction and reinforcement of teeth and bones. UDMA can become unbound and be released from light-cured polymer resins. Thus far, no evidence exists on the toxic effects of UDMA and its related working mechanisms for macrophages. Therefore, in the present study, we investigated the cytotoxicity, mode of cell death, DNA damage, caspase activities, mitochondrial dysfunction, and reactive oxygen species (ROS) generation in RAW264.7 macrophages treated with UDMA using the lactate dehydrogenase (LDH) assay kit, Annexin V-FITC and PI assays, micronucleus formation and comet assay, caspase fluorometric assay, JC-1 assay, and 2',7'-dichlorofluorescin diacetate (DCFH-DA) assay, respectively. Our results show that UDMA induced cytotoxicity; apoptosis and necrosis; genotoxicity, which is also called DNA damage; increased caspase-3, -8, and -9 activities; mitochondrial dysfunction; and intracellular ROS generation in a concentration-dependent manner in RAW264.7 macrophages. Thus, based on the observed inhibited concentration parallel trends, we concluded that UDMA induces toxic effects in macrophages. Furthermore, UDMA-induced intracellular ROS generation, cytotoxicity, and DNA damage were reduced by N-acetyl-L-cysteine.
RESUMO
Bisphenol-A (BPA), bisphenol A glycerolate dimethacrylate (Bis-GMA), triethylene glycol dimethacrylate (TEGDMA), and urethane dimethacrylate (UDMA) are organic monomers that can be released from dental composites into the oral cavity. Over specific concentrations, they can act as endocrine disruptors or cause toxic effects. The purpose of this work is to develop and validate an analytical method to determine BPA, Bis-GMA, TEGDMA, and UDMA monomers released from synthetic dental resins in artificial saliva. The method was validated before its application to new hybrid ceramic materials used in computer-aided design and computer-aided manufacturing (CAD/CAM) restorations to determine the release of monomers in various time intervals (e.g., 24 h, and 7, 14, 30, and 60 days), both in methanolic solutions, as well as in artificial saliva. Chromatographic analysis was performed isocratically on a Perfect Sil Target ODS-3 analytical column (250 mm × 4.6 mm, 5 µm) with CH3CN/H2O, 58/42% v/v as mobile phase within 23 min. The developed method was validated in terms of selectivity, linearity, accuracy, and precision.
RESUMO
This review article compiles the characteristics of resin based dental composites and an effort is made to point out their future perspectives. Recent research studies along with few earlier articles were studied to compile the synthesis schemes of commonly used monomers, their characteristics in terms of their physical, mechanical and polymerization process with selectivity towards the input parameters of polymerization process. This review covers surface modification processes of various filler particles using silanes, wear behaviour, antimicrobial behaviour along with its testing procedures to develop the fundamental knowledge of various characteristics of resin based composites. In the end of this review, possible areas of further interests are pointed out on the basis of literature review on resin based dental materials.
RESUMO
Methacrylate monomers found in many dental materials cause toxicity to dental pulp cells but the mechanism of the toxicity is poorly understood. We used cultured human dental pulp cells to test the effects of three commonly used monomers; bisphenol-A-glycidyl methacrylate (Bis-GMA), urethane dimethacrylate (UDMA), and triethyleneglycol dimethacrylate (TEGDMA). The order of toxicity was Bis-GMA>UDMA>TEGDMA. The toxicity correlated inversely with cystine uptake, with TEGDMA stimulating uptake and BisGMA and UDMA inhibiting uptake. Bis-GMA and UDMA induced oxidative stress, while TEGDMA did not. Toxicity correlated poorly with glutathione levels, as all compounds decreased cellular glutathione. TEGDMA is less toxic than Bis-GMA and UDMA likely because it stimulates cystine uptake and does not induce oxidative stress, the enhanced uptake of cystine appears to compensate for TEGDMA's direct interaction with glutathione. Bis-GMA and UDMA both deplete glutathione and inhibit cystine uptake leading to oxidative stress and cell death.
Assuntos
Resinas Compostas , Polpa Dentária , Bis-Fenol A-Glicidil Metacrilato , Materiais Dentários , Humanos , Metacrilatos , Polietilenoglicóis , Ácidos Polimetacrílicos , PoliuretanosRESUMO
OBJECTIVE: The most important desideratum of a provisional crown is an adequate marginal fit that is essential for maintaining optimal periodontal health, reducing the sensitivity of freshly prepared dentin and protection of the pulp. The purpose of this in vitro study was to compare the vertical marginal accuracy of provisional crown materials using three different material systems (chemically activated PMMA powder-liquid system, light activated UDMA single paste system, and chemically activated Bis-GMA two paste auto mix system) and two different techniques (direct and indirect). METHODS: Two customized stainless steel dies, simulating prepared and unprepared tooth were used to fabricate 40 provisional crowns. Additional silicone elastomeric impression and a vacuum-formed polypropylene sheet were used as a matrix. Ten crowns, each of the three material systems used in the study (n = 10 × 3) were fabricated using the direct technique and ten crowns from chemically activated PMMA powder-liquid system (n = 10 × 1) using an indirect technique. Scanning electron microscope (SEM) was used to measure vertical marginal discrepancies at x100 magnification. The results were analyzed using descriptive statistics and comparisons between various groups were made using one way analysis of variance (ANOVA) after checking the normality of data using Shapiro Wilk's Test. Post Hoc Tukey HSD Test was used to determine the statistical difference between the means of independent group pairs. RESULTS: The mean marginal discrepancies of Bis-GMA composite resin, UDMA composite resin, and PMMA acrylic resin using direct technique were 67.15 µm, 71.01 µm, and 84.56 µm respectively. PMMA acrylic resin showed a mean marginal discrepancy of 103.03 µm using the indirect technique. CONCLUSION: This study has shown that provisional crowns fabricated with Bis-GMA composite resin material (two paste auto mix system) registered the best marginal accuracy. Provisional crowns fabricated with indirect technique recorded less marginal opening than with direct technique.
RESUMO
The aim of the study was to evaluate the elution of Triethylene glycol dimethacrylate (TEGDMA), Urethane dimethacrylate (UDMA), Bisphenol A glycerolate dimethacrylate (BisGMA), and Bisphenol A (BPA), from a dual-cured resin cement through human dentin, under constant positive pulpal pressure. Ten human dentin disks were adjusted into a custom made testing device and transparent glass slabs were luted with Variolink II cement, under a steady pressure. The device was filled with Ringer's solution and a pressure of 14.1 cm H2O was applied. Eluates were retrieved from each one of the ten specimens at 9 time interval. All the samples were analyzed by High Performance Liquid Chromatography (HPLC). TEGDMA was detected from the second and UDMA was detected from the fourth time interval and then. The highest average concentration of TEGDMA and UDMA was detected in the 3 day time interval. Time had a significant effect on their elution. BPA and BisGMA were not detected in any sample of any time interval. The clinical relevance of the present study is that the concentration of the eluted monomers, under the conditions that were chosen, did not reach toxic levels for the pulp.
Assuntos
Dentina , Cimentos de Resina , Bis-Fenol A-Glicidil Metacrilato , Resinas Compostas , Cimentos de Ionômeros de Vidro , Humanos , Metacrilatos , Polietilenoglicóis , Ácidos PolimetacrílicosRESUMO
OBJECTIVES: Dental resin-based materials are widely used in modern dentistry. Especially, resin cements enjoy great popularity and are utilized in many applications. Nevertheless, monomers could be released from the resinous matrix, thus interact with surrounding tissues, cause adverse biological reactions and may lead in cases of implant retained restorations to peri-implant bone destruction. Hence, we performed an in-vitro study to determine cytotoxicity of resin monomers on osteoblast-like cells. METHODS: Three permanent osteoblast-like cell lines from tumor origin (MG-63 and Saos-2) as well as immortalized human fetal osteoblasts (hFOB 1.19) were used and treated with different concentrations of the main monomers: BisGMA, UDMA, TEGDMA and HEMA. The impact on cell viability was monitored using three different cytotoxicity tests: alamarBlue, XTT, and LDH assay. Mean±SEM were calculated and statistical analysis was performed with GraphPad Prism software. RESULTS: All monomers tested caused concentration dependent cytotoxic effects on the three investigated osteoblast-like cell lines. Although all three cell viability assays showed comparable results in cytotoxic ranking of the monomers (BisGMA > UDMA > TEGDMA > HEMA), higher differences in the absolute values were detected by the various test methods In addition, also a cell line dependent influence on cell viability could be identified with higher impact on the immortalized hFOB 1.19 cells compared to both osteosarcoma cell lines (MG-63, Saos-2). CONCLUSIONS: Monomer concentrations detected in elution studies caused toxic effects in osteoblast-like cells. Although the results from in-vitro studies cannot be directly transferred to a clinical situation our results indicate that released monomers from composite resin cements may cause adverse biological effects and thereby possibly lead to conditions favoring peri-implantitis and bone destruction. CLINICAL SIGNIFICANCE: The wide use of composite resin cements especially in implant-prosthetic treatments should be scrutinized to avoid possible clinical implications between eluted resin monomers and bone cells leading to conditions favoring peri-implantitis and bone destruction.