Factors associated with neurofeedback and mindfulness-based combination therapy for patients with substance use disorder: A multicenter study

Background and objectives Substance use disorder (SUD) has become a major concern in public health globally, and there is an urgent need to develop an integrated psychosocial intervention. The aims of the current study are to test the efficacy of the integrated treatment with neurofeedback and mindfulness-based therapy for SUD and identify the predictors of the efficacy. Methods This study included 110 participants with SUD into the analysis. Outcome of measures includes demographic characteristics, severity of dependence, quality of life, symptoms of depression, and anxiety. Independent t test is used to estimate the change of scores at baseline and three months follow-up. Generalized estimating equations are applied to analyze the effect of predictors on the scores of dependence severity over time by controlling for the effects of demographic characteristics. Results A total of 22 (20 %) participants were comorbid with major mental disorder (MMD). The decrement of the severity in dependence, anxiety, and depression after treatment are identified. Improved scores of qualities of life in generic, psychological, social, and environmental domains are also noticed. After controlling for the effects of demographic characteristics, the predictors of poorer outcome are comorbid with MMD, lower quality of life, and higher level of depression and anxiety. Conclusion The present study implicates the efficacy of integrated therapy. Early identification of predictors is beneficial for healthcare workers to improve the treatment efficacy. (AU)

Effect of highway greenbelt constrution on groundwater flow in a semi-arid region.

The highway greenbelt, vigorously promoted in arid and semi-arid areas, has obvious impacts on beautifying the environment, absorbing dust, reducing noise, and maintaining soil and water. Moreover, it affects the characteristics of how water resources are distributed and the regional groundwater cycle. However, the impact of highway greenbelt construction on groundwater flow in semi-arid areas is unknown. The Hubao Highway greenbelt in the north part of the Tumochuan Plain was studied as an example. The paper combines field investigation, remote sensing and mathematical modeling to quantify the impact of highway green space construction on regional groundwater circulation. The results showed that: Trees, shrubs and grasses were the dominant vegetation types in the landscaped area, accounting for 42.17% of the studied area. The total evapotranspiration water consumption of the green belt during the growing season was 471.35 × 104m3. The groundwater recharge in the study area was mainly derived from the lateral recharge in front of the mountain, and the main discharge was the evapotranspiration water consumption of the green belt. This evapotranspiration accounts for 3.31% of the total groundwater recharge. Under the condition that the recharge in front of the mountain remains constant, the evapotranspiration water consumption of the green belt will still have an increasing trend in the future. Appropriate planting of poplar and other high water-consuming trees may be the best way to mitigate the adverse effects of greenbelt evapotranspiration on groundwater resources. The results of this study provide valuable insights for environmental protection and infrastructure development in similar areas.

Application of Quality by Design in the Development of Hydrogen Sulfide Donor Loaded Polymeric Microparticles.

Hydrogen sulfide (H2S) is a multifaceted gasotransmitter molecule which has potential applications in many pathological conditions including in lowering intraocular pressure and providing retinal neuroprotection. However, its unique physicochemical properties pose several challenges for developing its efficient and safe delivery method system. This study aims to overcome challenges related to H2S toxicity, gaseous nature, and narrow therapeutic concentrations range by developing polymeric microparticles to sustain the release of H2S for an extended period. Various formulation parameters and their interactions are quantitatively identified using Quality-by-Design (QbD) approach to optimize the microparticle-based H2S donor (HSD) delivery system. Microparticles were prepared using a solvent-evaporation coacervation process by using polycaprolactone (PCL), soy lecithin, dichloromethane, Na2S.9H2O, and silicone oil as polymer, surfactant, solvent, HSD, and dispersion medium, respectively. The microparticles were characterized for size, size distribution, entrapment efficiency, and H2S release profile. A Main Effects Screening (MES) and a Response Surface Design (RSD) model-based Box-Behnken Design (BBD) was developed to establish the relationship between critical process parameters (CPPs) and critical quality attributes (CQAs) qualitatively and quantitatively. The MES model identified polymer to drug ratio and dispersion medium quantity as significant CPPs among others, while the RSD model established their quantitative relationship. Finally, the target product performance was validated by comparing predicted and experimental outcomes. The QbD approach helped in achieving overall desired microparticle characteristics with fewer trials and provided a mathematical relationship between the CPPs and the CQAs useful for further manipulation and optimization of release profile up to at least 30 days.

A Monte Carlo simulation-based health risk assessment of heavy metals in soils of the tropical region in southern China.

The disturbance of ecological stability may take place in tropical regions due to the elevated biomass density resulting from heavy metal and other contaminant pollution. In this study, 62 valid soil samples were collected from Sanya. Source analysis of heavy metals in the area was carried out using absolute principal component-multiple linear regression receptor modelling (APCS-MLR); the comprehensive ecological risk of the study area was assessed based on pollution sources; the Monte-Carlo model was used to accurately predict the health risk of pollution sources in the study area. The results showed that: The average contents of soil heavy metals Cu, Ni and Cd in Sanya were 5.53, 6.56 and 11.66 times higher than the background values of heavy metals. The results of soil geo-accumulation index (Igeo) showed that Cr, Mo, Mn and Zn were unpolluted to moderately polluted, Cu and Ni were moderately polluted, and Cd was moderately polluted to strongly polluted. The main sources of heavy metal pollution were natural sources (57.99%), agricultural sources (38.44%) and traffic sources (3.57%). Natural and agricultural sources were jointly identified as priority control pollution sources and Cd was the priority control pollution element for soil ecological risk. Heavy metal content in Sanya did not pose a non-carcinogenic risk to the population, but there was a carcinogenic risk to children. The element Zn had a high carcinogenic risk to children, and was a priority controlling pollutant element for the risk of human health, with agricultural sources as the priority controlling pollutant source.

Efficacy of root-end filling techniques using premixed putty type bioceramic cements: an ex vivo study.

OBJECTIVES: Currently, premixed putty-type bioceramic cements (PPBCs) have become popular materials for root-end fillings. This study investigated three root-end filling techniques using PPBCs and calcium silicate-based sealers including EDTA pretreatment. MATERIALS AND METHODS: Ninety root segments were prepared and standardized with an artificial fin and lateral canal, and assigned to three groups (n = 30). Root-end fillings were placed using BC-RRM Putty alone (Group PA), injection of BC sealer followed by BC-RRM Putty (Lid Technique: Group LT) or BC-RRM Putty with BC sealer coating (Deep putty packing technique: Group DP). Half of each group was pretreated with 17% EDTA. The radiographic images of the specimens were assessed by five graders and push-out bond strength tests were conducted. The data were analyzed with a general linear model including two-way ANOVA and chi-square test at a significance level of 5%. RESULTS: DP approach demonstrated significantly higher bond strength than LT (P < 0.05). However, there was no statistically significant difference in bond strength between PA and either DP or LT. EDTA pretreatment had no significant effect on push-out bond strength. Radiographically, for the main canal, PA and DP scored significantly higher than LT. In the fin, PA scored significantly higher than others (P < 0.05). CONCLUSION: Our study highlights variations in root-end filling techniques. Injecting a bulk of bioceramic sealer before the placement of PPBCs may reduce bond strength and radiopacity. The application of PPBCs alone or in the deep putty technique demonstrates potential for favorable outcomes. EDTA pretreatment did not enhance bond-strength. CLINICAL RELEVANCE: Careful selection and application of bioceramic materials and techniques in root-end fillings may influence the outcome of endodontic root-end surgery. When PPBCs and calcium silicate-based sealers are used together for root-end fillings, sealer followed by deep putty application may offer improved bond strength and radiographic fill compared to the lid technique.

The features of the reparative regeneration of an oral mucosa wound created under the exposure of a laser at a wavelength of 445 nm (a pilot study).

In clinical practice, an innovative laser technology that provides contactless preparation of soft tissues with a wavelength of 445 nm has been introduced. This study aimed to investigate the morphological changes in the oral mucosa when exposed to laser radiation at a wavelength of 445 nm in the ablation mode.An experimental study was conducted to analyze the dynamics of reparative regeneration in the wound caused by that particular type of radiation, utilizing the procedure of lower lip frenuloplasty as an illustration. 48 sexually mature male laboratory rats were chosen as the research object. The procedure of preparing the oral vestibule was executed by employing a contactless laser beam with a wavelength of 445 nm and a power of 0.7 W in continuous mode (CW) and an uninitiated fiber.Histological examination showed that 25 min after the surgery, there were large areas of coagulation necrosis in the oral mucosa in the area affected by the blue laser. In 48 h, the area of necrosis decreased both in size and depth. By the 7th day after the surgery, the necrotic masses had grown into the connective tissue, while marginal regeneration of the epithelium was noted. By the 14th day, the wound surface was completely epithelialized, represented by fibrous scar tissue. Clinically, around the mandibular incisors, there was a wide area of attached keratinized gingiva.The findings of histological examination indicate a necrosis of coagulation type in the region of tissue ablation and also show the absence of phase II of the inflammatory response (the stage of exudation), which expedites the process of epithelialization of the oral mucosa wound.

Rectal perforation after laser hemorrhoidoplasty: a case report.

This case report outlines the intricate management of rectal perforation following laser hemorrhoidoplasty in a 31-year-old female, leading to an acute abdomen, sepsis, and multiorgan failure. Urgent laparoscopic exploration and the establishment of a double-loop colostomy were undertaken, marking the beginning of a complex course characterized by relapsed pelvic sepsis. Laser hemorrhoidoplasty has gained widespread acceptance for its minimally invasive approach in treating hemorrhoids. Remarkably, to our knowledge, the case we present is the first major complication reported after laser hemorrhoidoplasty, likely attributed to collateral thermic and mechanical tissue damage.

Exploring the potential of CoMoO4-modified graphitic carbon nitride to boost oxidation of amoxicillin micropollutants in hospital wastewater.

This study investigates the removal of amoxicillin micropollutants (AM) from hospital wastewater using CoMoO4-modified graphitic carbon nitride (CMO/gCN). Consequently, CMO/gCN exhibits notable improvements in visible light absorption and electron-hole separation rates compared to unmodified gCN. Besides, CMO/gCN significantly enhances the removal efficiency of AM, attaining an impressive 96.5%, far surpassing the performance of gCN at 48.6%. Moreover, CMO/gCN showcases outstanding reusability, with AM degradation performance exceeding 70% even after undergoing six cycles of reuse. The removal mechanism of AM employing CMO/gCN involves various photoreactions of radicals (•OH, •O2-) and amoxicillin molecules under light assistance. Furthermore, CMO/gCN demonstrates a noteworthy photodegradation efficiency of AM from hospital wastewater, reaching 92.8%, with a near-complete reduction in total organic carbon levels. Detailed discussions on the practical applications of the CMO/gCN photocatalyst for removal of micropollutants from hospital wastewater are provided. These findings underline the considerable potential of CMO/gCN for effectively removing various pollutants in environmental remediation strategies.

Lipoplexes' Structure, Preparation, and Role in Managing Different Diseases.

Lipid-based vectors are becoming promising alternatives to traditional therapies over the last 2 decades specially for managing life-threatening diseases like cancer. Cationic lipids are the most prevalent non-viral vectors utilized in gene delivery. The increasing number of clinical trials about lipoplex-based gene therapy demonstrates their potential as well-established technology that can provide robust gene transfection. In this regard, this review will summarize this important point. These vectors however have a modest transfection efficiency. This limitation can be partly addressed by using functional lipids that provide a plethora of options for investigating nucleic acid-lipid interactions as well as in vitro and in vivo nucleic acid delivery for biomedical applications. Despite their lower gene transfer efficiency, lipid-based vectors such as lipoplexes have several advantages over viral ones: they are less toxic and immunogenic, can be targeted, and are simple to produce on a large scale. Researchers are actively investigating the parameters that are essential for an effective lipoplex delivery method. These include factors that influence the structure, stability, internalization, and transfection of the lipoplex. Thorough understanding of the design principles will enable synthesis of customized lipoplex formulations for life-saving therapy.

Anaerobic digestion of herbal waste: a waste to energy option.

Herbal waste produced during the manufacturing of herbal products is a potential feedstock for anaerobic digestion due to high amount of organic matter that can be transformed into biogas as an energy resource. Therefore, the present study was undertaken to convert herbal waste produced during the manufacturing of common of Ayurveda products into biogas through anaerobic digestion process using batch test study under controlled mesophilic temperature conditions of 35 °C with food to inoculum ratio of 0.75. The maximum biomethane potential (BMP) of 0.90 (gCH4COD/g CODfed) and sludge activity of 0.70 (gCH4-CD/gVSS) was exhibited by WS herbal waste owing to its high chemical oxygen demand (COD) of 4 g/g and better solubilization potential of the organic matter showing change in volatile suspended solids (ΔVSS) of 79%. On the other hand, the waste derived from the TA herb, exhibited the least biogas yield of 0.55 (gCH4COD/g CODfed) and sludge activity of 0.40 (gCH4-CD/gVSS), albeit with higher organic matter present. This was due to the possible hindrance of waste solubilization by the presence of lignin. The waste derived from VVL and PE showed intermediate BMP and sludge activity. The methane generation rate constant (k), a key indicator of the biodegradation potential, was also evaluated. The k values showed similar trend as of BMP values ranging from 0.081 to 0.15 d-1 thus indicating the influence of presence of lignin and the change in ΔVSS. The present study proves anaerobic digestion to be an alternative treatment method to be a milestone for management of herbal wastes and can be successfully implemented on real-scale systems.