The derivation of a Reference Dose (RfD) for perfluorooctane sulfonate (PFOS) based on immune suppression.

Exposure to perfluorooctane sulfonate (PFOS) is ubiquitous in populations and environments worldwide. Its long half-life in humans, indefinite persistence in the environment, and awareness of its widespread presence in drinking water make the human health assessment of PFOS a priority. While developmental, endocrine, and hepatic effects, and increased serum cholesterol are among the outcomes resulting from PFOS exposure, immunosuppression has also consistently emerged as an adverse effect. An in-depth review of the relevant scientific literature on the toxicology of PFOS has identified immunosuppression as a sensitive endpoint for PFOS toxicity. Here, we focus specifically on that endpoint and provide a detailed derivation of a Reference Dose (RfD) of 1.8 × 10-6 mg/kg/day for chronic human exposure to PFOS. This RfD is based on decreased plaque-forming cell (PFC) response in mice, an endpoint that reflects suppression of the immune response to a foreign antigen. We additionally identify two endpoints in the epidemiology literature, decreased vaccine response and increased incidence of childhood infections, that are associated with PFOS exposure and that are consistent with and support the decreased PFC response endpoint from animal studies. We provide a weight of evidence analysis integrating the evidence from animal and epidemiology endpoints. Finally, we compare this RfD to the PFOS RfD derived by the United States Environmental Protection Agency (USEPA) Office of Water based on a developmental endpoint. Based on this comparison, and given our assessment, the USEPA RfD does not provide sufficient protection against the adverse health effects of PFOS. The RfD derived herein is intended to be public health protective and appropriately minimizes PFOS exposure based on available evidence.

Guideline levels for PFOA and PFOS in drinking water: the role of scientific uncertainty, risk assessment decisions, and social factors.

Communities across the U.S. are discovering drinking water contaminated by perfluoroalkyl and polyfluoroalkyl substances (PFAS) and determining appropriate actions. There are currently no federal PFAS drinking water standards despite widespread drinking water contamination, ubiquitous population-level exposure, and toxicological and epidemiological evidence of adverse health effects. Absent federal PFAS standards, multiple U.S. states have developed their own health-based water guideline levels to guide decisions about contaminated site cleanup and drinking water surveillance and treatment. We examined perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) water guideline levels developed by the U.S. Environmental Protection Agency (EPA) and state agencies to protect people drinking the water, and summarized how and why these levels differ. We referenced documents and tables released in June 2018 by the Interstate Technology and Regulatory Council (ITRC) to identify states that have drinking water and groundwater guideline levels for PFOA and/or PFOS that differ from EPA's health advisories (HAs). We also gathered assessment documents from state websites and contacted state environmental and health agencies to identify and confirm current guidelines. Seven states have developed their own water guideline levels for PFOA and/or PFOS ranging from 13 to 1000 ng/L, compared to EPA's HA of 70 ng/L for both compounds individually or combined. We find that the development of PFAS guideline levels via exposure and hazard assessment decisions is influenced by multiple scientific, technical, and social factors, including managing scientific uncertainty, technical decisions and capacity, and social, political, and economic influences from involved stakeholders. Assessments by multiple states and academic scientists suggest that EPA's HA is not sufficiently protective. The ability of states to develop their own guideline levels and standards provides diverse risk assessment approaches as models for other state and federal regulators, while a sufficiently protective, scientifically sound, and enforceable federal standard would provide more consistent protection.

Concentration-dependent changes to diffusion and chemical shift of internal standard molecules in aqueous and micellar solutions.

Sodium 4,4-dimethyl-4-silapentane-1-sulfonate (DSS) is the most widely accepted internal standard for protein NMR studies in aqueous conditions. Since its introduction as a reference standard, however, concerns have been raised surrounding its propensity to interact with biological molecules through electrostatic and hydrophobic interactions. While DSS has been shown to interact with certain proteins, membrane protein studies by solution-state NMR require use of membrane mimetics such as detergent micelles and, to date, no study has explicitly examined the potential for interaction between membrane mimetics and DSS. Consistent with its amphipathic character, we show DSS to self-associate at elevated concentrations using pulsed field gradient-based diffusion NMR measurements. More critically, DSS diffusion is significantly attenuated in the presence of either like-charged sodium dodecyl sulfate or zwitterionic dodecylphosphocholine micelles, the two most commonly used detergent-based membrane mimetic systems used in solution-state NMR. Binding to oppositely charged dodecyltrimethylammonium bromide micelles is also highly favourable. DSS-micelle interactions are accompanied by a systematic, concentration- and binding propensity-dependent change in the chemical shift of the DSS reference signal by up to 60 ppb. The alternative reference compound 4,4-dimethyl-4-silapentane-1-ammonium trifluoroacetate (DSA) exhibits highly similar behaviour, with reversal of the relative magnitude of chemical shift perturbation and proportion bound in comparison to DSS. Both DSS and DSA, thus, interact with micelles, and self-assemble at high concentration. Chemical shift perturbation of and modulation of micellar properties by these molecules has clear implications for their use as reference standards.

Application of a spatially resolved model to contextualise monitoring data for risk assessment of down-the-drain chemicals over large scales.

Many regulatory screening level exposure assessments are based on simple large scale conceptual scenarios. However, exposure, and therefore risks associated with chemicals, are characterised by high spatial variability. The Scenario assembly tool (ScenAT) is a global screening level model to enable spatially resolved local predictions of environmental concentrations of home and personal care chemicals. It uses the European Union Technical Guidance Document (TGD) equation to predict local scale freshwater concentrations (predicted environmental concentrations - PECs) of chemicals discharged via wastewater. ScenAT uses Geographic Information System (GIS) layers for the underlying socio-economic (population) and environmental parameters (per capita water use, sewage treatment plant connectivity, dilution factor). Using a probabilistic approach, we incorporate sources of uncertainty in the input data (tonnage estimation, removal in sewage treatment plants and seasonal variability in dilution factors) for two case-study chemicals: the antimicrobial triclosan (TCS) and the anionic surfactant linear alkylbenzene sulphonate (LAS). We then compare model estimates of wastewater and freshwater concentrations of TCS and LAS to UK monitoring data. Comparison showed that modeled PECs were on average higher than mean measured data for TCS and LAS by a factor 1.8 and 1.4, respectively. Considering the uncertainty associated with both model and monitoring data, the use of a probabilistic approach using the ScenAT model for screening assessment is reasonable. The combination of modelled and monitoring data enables the contextualisation of monitoring data. Spatial PECs can be used to identify areas of elevated concentration for further refined assessment.

Recent experimental results of effects of perfluoroalkyl substances in laboratory animals - Relation to current regulations and guidance values.

The detection of perfluoroalkyl substances (PFAS) in surface and drinking water from various countries raised the attention to the presence of these chemicals in environmental probes and led to several regulatory actions to limit exposure in human beings. There was particular concern about perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS), due to their former wide-spread use. Recently, several institutions published revisions of former regulatory or recommended maximum concentrations in drinking water and food, which are markedly lower than the former values. The present short overview describes the current regulations for PFAS and compares them with the outcome of several experimental studies in laboratory animals at low-level exposure to PFOA and PFOS. In addition, regulations for short-chain PFAS are presented which, due to lack of toxicological information, are evaluated according to the concepts of Threshold of Toxicological Concern (TTC) or the Health-related Indication Values (HRIV).

Polar stir bars for isolation and preconcentration of perfluoroalkyl substances from human milk samples prior to UHPLC-MS/MS analysis.

BACKGROUND: A new method for the determination of four perfluoroalkyl carboxylic acids (from C5 to C8) and perfluorooctane sulfonate in human milk samples using stir-bar sorptive extraction-ultra-HPLC-MS/MS has been accurately optimized and validated. METHODOLOGY: Polydimethylsiloxane and polyethyleneglycol modified silicone materials were evaluated. DISCUSSION: Overall, polyethyleneglycol led to a better sensitivity. After optimizing experimental variables, the method was validated reaching detection limits in the range of 0.05-0.20 ng ml(-1); recovery rates from 81 to 105% and relative standard deviations fewer than 13% in all cases. The method was applied to milk samples from five randomly selected women. All samples were positive for at least one of the target compounds with concentrations ranging between 0.8 and 6.6 ng ml(-1), being the most abundant perfluorooctane sulfonate.

Polyfluorinated substances in abiotic standard reference materials.

The National Institute of Standards and Technology (NIST) has a wide range of Standard Reference Materials (SRMs) which have values assigned for legacy organic pollutants and toxic elements. Existing SRMs serve as homogenous materials that can be used for method development, method validation, and measurement for contaminants that are now of concern. NIST and multiple groups have been measuring the mass fraction of a group of emerging contaminants, polyfluorinated substances (PFASs), in a variety of SRMs. Here we report levels determined in an interlaboratory comparison of up to 23 PFASs determined in five SRMs: sediment (SRMs 1941b and 1944), house dust (SRM 2585), soil (SRM 2586), and sludge (SRM 2781). Measurements presented show an array of PFASs, with perfluorooctane sulfonate being the most frequently detected. SRMs 1941b, 1944, and 2586 had relatively low concentrations of most PFASs measured while 23 PFASs were at detectable levels in SRM 2585 and most of the PFASs measured were at detectable levels in SRM 2781. The measurements made in this study were used to add values to the Certificates of Analysis for SRMs 2585 and 2781.

Development of PFOS and PFOA criteria for the protection of freshwater aquatic life in China.

Perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA) are two widely used perfluorinated compounds. They have been detected in various environmental media and have harmed aquatic life and systems. The toxic effects of PFOS and PFOA on freshwater organisms were explored with the goal of protecting aquatic ecosystems in this study. Data from acute toxicity tests using nine aquatic species and chronic toxicity tests using three species were analyzed, along with PFOS and PFOA toxicity data for representative Chinese aquatic biota that have been published in the Chinese and international literature. Using the method recommended by the United States Environmental Protection Agency (US EPA), the criterion maximum concentration (CMC) for PFOS was calculated to be 3.78 mg/L, and the criterion continuous concentration (CCC) was calculated to be 0.25mg/L. For PFOA, the CMC was calculated to be 45.54 mg/L, and the CCC was calculated to be 3.52 mg/L. The criteria derived in this study provide the scientific basis for development of water quality standards and aquatic ecosystem risk evaluation.

Measurement of absolute concentrations of individual compounds in metabolite mixtures by gradient-selective time-zero 1H-13C HSQC with two concentration references and fast maximum likelihood reconstruction analysis.

Time-zero 2D (13)C HSQC (HSQC(0)) spectroscopy offers advantages over traditional 2D NMR for quantitative analysis of solutions containing a mixture of compounds because the signal intensities are directly proportional to the concentrations of the constituents. The HSQC(0) spectrum is derived from a series of spectra collected with increasing repetition times within the basic HSQC block by extrapolating the repetition time to zero. Here we present an alternative approach to data collection, gradient-selective time-zero (1)H-(13)C HSQC(0) in combination with fast maximum likelihood reconstruction (FMLR) data analysis and the use of two concentration references for absolute concentration determination. Gradient-selective data acquisition results in cleaner spectra, and NMR data can be acquired in both constant-time and non-constant-time mode. Semiautomatic data analysis is supported by the FMLR approach, which is used to deconvolute the spectra and extract peak volumes. The peak volumes obtained from this analysis are converted to absolute concentrations by reference to the peak volumes of two internal reference compounds of known concentration: DSS (4,4-dimethyl-4-silapentane-1-sulfonic acid) at the low concentration limit (which also serves as chemical shift reference) and MES (2-(N-morpholino)ethanesulfonic acid) at the high concentration limit. The linear relationship between peak volumes and concentration is better defined with two references than with one, and the measured absolute concentrations of individual compounds in the mixture are more accurate. We compare results from semiautomated gsHSQC(0) with those obtained by the original manual phase-cycled HSQC(0) approach. The new approach is suitable for automatic metabolite profiling by simultaneous quantification of multiple metabolites in a complex mixture.

Some issues relating to the use of perfluorooctanesulfonate (PFOS) samples as reference standards.

Samples of potassium perfluorooctanesulfonate (PFOSK) from three suppliers were analyzed by LC-ESI-MS/MS for purity and by LC-ESI-MS for the percentage of linear isomer present. Our data indicated that the purity ranged from 80% to 98% and the percentages of linear isomer from 67% to 79%. The proportion of branched isomers present in the samples was also estimated using (19)F NMR. These results agreed quite closely with those found by LC-ESI-MS indicating that there is essentially no difference in overall SIM response factor for the branched isomers vs. that of the linear isomer. Several further observations relevant to the use of standards when analyzing for PFOS were encountered during this study. It appears unlikely that matrix effects attributable to the cation (sodium or potassium) present in PFOSNa or PFOSK internal standards is an issue. In seeking potential matrix effects, it was found that the chromatography was improved substantially when the standard was injected as a solution in 80:20 methanol/water rather than 100% methanol. Notably, in concert with the improvement in chromatography, an increase of about 10% in response was observed. In some closely related studies, when (18)O(2) mass-labeled perfluorohexanesulfonate was used as an internal standard, the actual and theoretical concentration ratios matched closely those for related native sulfonates as long as they did not co-elute. However, when they did co-elute, the peak intensities of the native species were enhanced by about 5%, while those of the labeled compound were suppressed by a similar amount. If this effect were not taken into account, the concentration of the native would be inflated by 10%.

Perfluorinated compounds in coastal waters of Hong Kong, South China, and Korea.

Perfluorinated compounds (PFCs), such as perfluorooctanesulfonate (PFOS) and related compounds, have recently been identified in the environment. PFOS, the terminal degradation product of many of the PFCs, has been found globally in many wildlife species, as well as open ocean waters, even in remote regions far from sources. In this study, a solid-phase extraction procedure coupled with high-performance liquid chromatography interfaced to high-resolution mass spectrometry was used to isolate, identify, and quantify small concentrations of PFCs in seawater. These techniques were applied to investigate the local sources of PFCs in several industrialized areas of Asia and provide information on how the PFCs are circulated by coastal currents. Ranges of concentrations of PFOS in coastal seawaters of Hong Kong, the Pearl River Delta, including the South China Sea, and Korea were 0.09-3.1, 0.02-12, and 0.04-730 pg/mL, respectively, while those of perfluorooctanoic acid (PFOA) were 0.73-5.5, 0.24-16, and 0.24-320 pg/mL, respectively. Potential sources of PFCs include major industrialized areas along the Pearl River Delta of southern China and major cities of Korea, which are several of the fastest growing industrial and economic regions in the world. Detectable concentrations of PFOS and PFOA in waters of southern China were similar to those in the coastal marine environment of Japan and certain regions in Korea. Concentrations of PFCs in several locations in Korean waters were 10-100-fold greater than those in the other locations on which we report here. The spatial and seasonal variations in PFC concentrations in surface seawaters in the Pearl River Delta and South China Sea indicate the strong influence of the Pearl River discharge on the magnitude and extent of PFC contamination in southern China. All of the concentrations of PFOS were less than those that would be expected to cause adverse effects to aquatic organisms or their predators except for one location in Korea adjacent to an industrialized area. Hazard quotients were from <0.001 to 0.002 for aquatic animals and ranged from <0.001 to 17 for predatory birds.

Comparison of transfection conditions for a lentivirus vector produced in large volumes.

A number of different transfection reagents have been used for lentiviral vector production. We directly compared transfection buffers, DNA purification methods, chemical facilitators, and DNA concentrations to optimize production. The use of N,N-bis (2-hydroxyethyl)-2-aminoethanesulfonic acid (BES), sodium butyrate, and one fourth the total amount of DNA used in standard transient transfection protocols were the best conditions for virus production. These reagents were combined into a single protocol and scaled-up to produce liter quantities of virus in a multitray tissue culture vessel.