Gaining insight into genotoxicity with the comet assay in inhomogenoeous exposure scenarios: The effects of tritiated steel and cement particles on human lung cells in an inhalation perspective.

The comet assay was recently applied for the first time to test the genotoxicity of micrometric stainless steel and cement particles, representative of those produced in the dismantling of nuclear power plants. A large dataset was obtained from in vitro exposure of BEAS-2B lung cells to different concentrations of hydrogenated (non-radiative control) and tritiated particles, to assess the impact of accidental inhalation. Starting from the distributions of the number of nuclei scored at different extent of DNA damage (% tail DNA values), we propose a new comet data treatment designed to consider the inhomogeneity of the action of such particles. Indeed, due to particle behavior in biological media and concentration, a large fraction of cells remains undamaged, and standard averaging of genotoxicity indicators leads to a misinterpretation of experimental results. The analysis we propose reaches the following goals: genotoxicity in human lung cells is assessed for stainless steel and cement microparticles; the role of radiative damage due to tritium is disentangled from particulate stress; the fraction of damaged cells and their average level of DNA damage are assessed separately, which is essential for carcinogenesis implications and sets the basis for a better-informed risk management for human exposure to radioactive particles.

Enhanced inhibition of HEDP on SRB-mediated corrosion with D-phenylalanine.

Microbiologically influenced corrosion (MIC) caused by biofilm is a serious problem in many industries. D-amino acids could be a potential strategy to enhance traditional corrosion inhibitors due to their roles in biofilm reduction. However, the synergistic mechanism of D-amino acids and inhibitors remains unknown. In this study, D-Phenylalanine (D-Phe) and 1-hydroxyethane-1,1-diphosphonic acid (HEDP) were selected as the typical D-amino acid and corrosion inhibitor to evaluate their effect on the corrosion caused by Desulfovibrio vulgaris. The combination of HEDP and D-Phe obviously slowed down the corrosion process by 32.25%, decreased the corrosion pit depth and retarded cathodic reaction. SEM and CLSM analysis indicated that D-Phe reduced the content of extracellular protein and thus inhibited the biofilm formation. The molecular mechanism of D-Phe and HEDP on corrosion inhibition was further explored via transcriptome. The combination of HEDP and D-Phe down-regulated the gene expression of peptidoglycan, flagellum, electron transfer, ferredoxin and quorum sensing (QS) molecules, leading to less peptidoglycan synthesis, weaker electron transfer and stronger QS factor inhibition. This work provides a new strategy for improving traditional corrosion inhibitors, retarding MIC and mitigating subsequent water eutrophication.

Effects of Pseudomonas aeruginosa on EH40 steel corrosion in the simulated tidal zone.

Corrosion of metals in the tidal zone shortens the service life of facilities considerably and causes extensive economic losses each year. However, the contribution of microbiologically influenced corrosion (MIC) to this progress is usually ignored, and consequently the research on the mechanism of MIC in the tidal zone is highly desirable. In this study, the impact of the typical marine strain Pseudomonas aeruginosa on EH40 steel corrosion in the simulated tidal zone was evaluated. P. aeruginosa accelerated the corrosion of EH40 steel in the simulated tidal zone and its corrosion promotion efficiency rose over time. The environmental stress promoted the metabolism, energy production, and secretion of phenazines of P. aeruginosa, which promoted extracellular electron transfer between bacteria and steel, and accelerated MIC. The study proposes a possible mechanism of MIC in the tidal zone at the molecular biological level, which is of theoretical significance for evaluating the corrosion risks of marine equipment.

Microbial Corrosion in Orthodontics.

Even with the exponential popularity of the contemporary clear aligners, the main stream of orthodontic practice still remains to be metal braces especially in adolescent age-group.1 Along with the advantages of metal braces such as lower cost, reduced friction, etc., there goes the disadvantages such as corrosion possibility, reduced esthetics, etc. Corrosion of orthodontic appliances is a widely researched topic.2-5 It is surprising to learn that microbially induced corrosion (MIC) has not been addressed in orthodontic literature till date. Microbial corrosion is an interesting arena which requires knowledge of both corrosion science and microbiology. The microorganisms capable of corrosion include various bacteria, fungi, and algae. The most common among them which has been widely indicated in MIC are the bacteria belonging to the sulfur cycle especially the sulfate-reducing bacteria (SRB). The connecting knot with orthodontics is the reported prevalence of these SRB in the oral cavity. SRB is prevalent in healthy individuals,6,7 patients associated with periodontitis6-11 and patients with gastrointestinal issues.12-14 The prevalence of SRB in the oral cavity has a greater clinical implication since the SRB have been proven to cause corrosion of stainless steel.15-24 There is literature attributing SRB as a potential cause in periodontal diseases7-11 as well as gastrointestinal diseases such as ulcerative colitis, inflammatory bowel diseases, and Crohn's disease.12 With its presence in the healthy oral environment already reported in the previous studies,6,7,25,26 it further emphasizes the absolute need to be researching on its corrosion possibility in the intra oral environment. The genus generally found intraorally was Desulfovibrio and Desulfobacter10 which is commonly regarded as the most "opportunistic" and ubiquitous group of sulfate reducers.6,7 There is an interesting literature on the inhibition of Desulfovibrio spp. by human saliva, the reason being quoted as salivary nitrate and nitrite.14 The mechanism behind the antimicrobial action of nitrate and nitrite is that they increase the oxidative stress on the bacteria.27 However, concentrations of salivary nitrate vary depending on the food intake, endogenous production, and salivary flow rate.28,29 Despite there exist natural inhibitors, the prevalence in oral cavity is high, 22% in healthy and 86% in patients associated with periodontitis.7 There is a predilection for the bacteria to grow when favorable conditions exist. Biofilms is one such favorable medium for the growth of SRB. Paster et al.26 identified SRB in biofilms of patients associated with refractory periodontitis, periodontitis, acute necrotizing ulcerative gingivitis (ANUG), and also in healthy subjects. Biofilm is a surface film composed of organic and inorganic saliva components that are colonized with microorganisms in extracellular polymeric substances adsorbed on all surfaces in the oral cavity.30 The oral biofilm formation is a complex process involving interspecies aggregation, which is surrounded by a cohesive matrix, forms a complex structure which in turn facilitates anaerobic growth. It is the intrinsic nature of oral biofilms which make the survival of facultative anaerobes such as SRB in the oral cavity possible. Literatures31-35 report that there are increased biofilm formations in orthodontic patients due to increased retentive areas caused by the brackets, ligatures, wires, mini implants, force components, and archwires. Bacteria in dental plaque function as a metabolically, functionally, and physically integrated community.36 The study by Mystkowska et al.37 mentioned that biofilm per se play a critical role in corrosion process by forming corrosive microcells. With time-dependent association, the microbes in the biofilm, along with saliva acting as an electrolyte and components from food, causes a decreased pH in the areas immediately under the biofilms. The decreased pH along with a change of oxygenation releases metal oxides and hydroxides from the metal surface ultimately leading to the corrosion of metallic structures.37-41 The initial roughness also acts in a vicious form promoting more biofilm adherence and the process repeats causing more corrosion. With the biofilm itself serving to initiate and propagate corrosion, the increased prevalence of SRB in patients associated with orthodontics treatment all the more increases the possibility of MIC of orthodontic materials.

Platelet-rich fibrin accelerates skin wound healing in pressure injuries: a rat model.

OBJECTIVE: Platelet-rich fibrin (PRF) plays a role in promoting wound healing by releasing cytokines, chemokines and growth factors, and by inducing proliferation and activation of cells. A pressure injury (PI) is a treatable but serious and costly disease with adverse outcomes for the patient. However, traditional PI treatments are time-consuming, with limited effectiveness. Thus, we aimed to investigate the effects and mechanisms of PRF on skin wound healing in PIs in vivo in a rat model. METHOD: PRF was prepared from the blood of male Wistar rats. A rat model for PI ischaemia/reperfusion injury was established by placing a magnet onto the back skin, where a magnetic steel plate had been previously implanted. The rats were randomised into two groups: the control group was treated with sterile gauze dressings and the iPRF group received additional PRF. Skin wound healing rate was calculated and a CD31/Masson's trichrome stain performed. RESULTS: In this study, 16 rats were allocated to the two groups (n=8 in each group). PRF improved the skin wound healing rate of PIs in the rats; haematoxylin and eosin staining and CD31 staining showed that the number of capillaries increased significantly in the wound. However, Masson's trichrome staining showed no increase in fibrotic tissues after PRF treatment. CONCLUSION: In this in vivo rat model for PI, PRF accelerated skin wound healing by increasing angiogenesis in the wound.

Dose-response analysis of Bacillus thuringiensis HD-1 cry- spore reduction on surfaces using formaldehyde with pre-germination.

AIM: To establish a basis for rapid remediation of large areas contaminated with Bacillus anthracis spores. METHODS AND RESULTS: Representative surfaces of wood, steel and cement were coated by nebulization with B. thuringiensis HD-1 cry- (a simulant for B. anthracis) at 5.9 ± 0.2, 6.3 ± 0.2 and 5.8 ± 0.2 log10 CFU per cm2 , respectively. These were sprayed with formaldehyde, either with or without pre-germination. Low volume (equivalent to ≤2500 L ha-1 ) applications of formaldehyde at 30 g l-1 to steel or cement surfaces resulted in ≥4 or ≤2 log10 CFU per cm2 reductions respectively, after 2 h exposure. Pre-germinating spores (500 mmol l-1 l-alanine and 25 mmol l-1 inosine, pH 7) followed by formaldehyde application showed higher levels of spore inactivation than formaldehyde alone with gains of up to 3.4 log10 CFU per cm2 for a given dose. No loss in B. thuringiensis cry- viability was measured after the 2 h germination period, however, a pre-heat shock log10 reduction was seen for B. anthracis strains: LSU149 (1.7 log10), Vollum and LSU465 (both 0.9 log10), LSU442 (0.2 log10), Sterne (0.8 log10) and Ames (0.6 log10). CONCLUSIONS: A methodology was developed to produce representative spore contamination of surfaces along with a laboratory-based technique to measure the efficacy of decontamination. Dose-response analysis was used to optimize decontamination. Pre-germinating spores was found to increase effectiveness of decontamination but requires careful consideration of total volume used (germinant and decontaminant) by surface type. SIGNIFICANCE AND IMPACT OF THE STUDY: To be practically achievable, decontamination of a wide area contaminated with B. anthracis spores must be effective, timely and minimize the amount of materials required. This study uses systematic dose-response methodology to demonstrate that such an approach is feasible.

Ferric sulfate pulpotomy in primary teeth with different base materials: a 2-year randomized controlled trial.

OBJECTIVE: To evaluate the effects of zinc oxide-eugenol, calcium hydroxide, and mineral trioxide aggregate as base materials on the clinical and radiographic success of ferric sulfate pulpotomies in primary molars. METHOD AND MATERIALS: Following hemostasis with 15.5% ferric sulfate, 105 teeth were randomly allocated to three groups: Group 1, zinc oxide-eugenol; Group 2, calcium hydroxide; and Group 3, mineral trioxide aggregate. All teeth were restored with stainless-steel crowns. Clinical and radiographic examinations were conducted at 6, 12, 18, and 24 months. RESULTS: After 24 months, clinical success rates for Groups 1 to 3 were 97.1% (34/35 teeth), 94.2% (33/35 teeth), and 97.1% (34/35 teeth), respectively (P > .05). Radiographic success rates were 65.7% (23/35 teeth), 65.7% (23/35 teeth), and 77.1% (27/35 teeth), respectively (P > .05). Internal resorption was the most observed radiographic finding (15/105 teeth). CONCLUSIONS: The choice of zinc oxide-eugenol, calcium hydroxide, and mineral trioxide aggregate, as base materials, did not affect the clinical and radiographic success of ferric sulfate pulpotomies in primary teeth.

Mitigation of microbial corrosion by Cu addition to X65 pipeline steel by Pseudomonas aeruginosa MCCC 1A00099.

Microbiologically influenced corrosion (MIC) is becoming a knotty problem for transmission pipelines. Developing MIC mitigation strategies for pipelines is increasingly urgent. In this study, MIC resistance against Pseudomonas aeruginosa of the X65 pipeline steels with (X65Cu) and without (X65) Cu addition was comparatively studied by electrochemical measurements and surface observation. Experimental results demonstrated that the corrosion rate of X65Cu steel was lower than that of X65 steel no matter in sterile or bacteria-containing media. Cu addition is helpful to the formation of the rust layer in the sterile medium. Surface observation showed that X65Cu steel exhibited a better MIC resistance against P. aeruginosa than that of X65 steel. Cu ions released from the X65Cu steel could effectively kill the P. aeruginosa attached on the steel surface, thus evidently decreased the pit depth and diameter.

Food-grade D-limonene enhanced a green biocide in the mitigation of carbon steel biocorrosion by a mixed-culture biofilm consortium.

Microbiologically influenced corrosion (MIC), or microbial biocorrosion, is caused directly by microbial metabolic activities/products or induced by microbial biofilm's damage of a protective film that exposes a solid surface to a pre-existing corrosive environment. MIC causes billions of dollars of losses in various industrial processes, especially in oil and gas and water utilities. The mitigation of problematic industrial microbes typically relies on biocides whose discharges can cause environmental problems. Thus, more effective biocide applications are desired to minimize environmental impact. D-Limonene, a citrus peel oil, generally regarded as safe (GRAS), was used to enhance the popular biodegradable tetrakis hydroxymethyl phosphonium sulfate (THPS) biocide. An oilfield mixed-culture biofilm was grown anaerobically in enriched artificial seawater containing C1018 carbon steel coupons for 7 days at 37 °C. One hundred ppm (w/w) D-limonene reduced general heterotrophic bacteria (GHB) and acid-producing bacteria (APB) effectively, leading to 5.4-log and 6.0-log reductions in sessile GHB and APB cell counts, respectively, compared to no treatment control. The combination of 100 ppm D-limonene + 100 ppm THPS achieved extra 1.0-log SRB, 0.6-log GHB and 0.5-log APB reductions in sessile cell counts, which led to extra 58% reduction in microbial corrosion mass loss (1.2 vs. 0.5 mg/cm2) and extra 30% reductions in maximum pit depth (11.5 vs. 8.1 µm), compared to 100 ppm THPS-only treatment. Linear polarization resistance and potentiodynamic polarization (PDP) corrosion data supported mass loss and pitting data. Mixed-culture biofilms on carbon steel coupons after 7 day incubation at 37 °C showing enhanced biocide treatment outcome using D-limonene + THPS: A no treatment, B 100 ppm D-limonene, C 100 ppm THPS, D 100 ppm D-limonene + 100 ppm THPS.

Directly bonding antimicrobial peptide mimics to steel and the real world applications of these materials.

Despite increased sterilisation and education campaigns, hospital acquired infections have not been eradicated. Bacterial colonisation of frequent touch surfaces is key in the transmission of infection. Most current technologies cannot provide a material which can rapidly kill bacteria. Here we report a novel surface technology, which uses synthetic mimetics of human defensin proteins on a surface. The surface shows excellent antibacterial efficacy against Staphylococcus aureus, Staphylococcus epidermidis, Enterococcus, Pseudomonas aeruginosa and Escherichia coli. Both microbiology laboratory tests and trials in hospital settings of this new antimicrobial material (AMS) showed >99% efficacy over a year in situ. It maintains its efficacy through accelerated ageing tests and has shown to kill bacteria far more rapidly (45 min) than the commercially available technologies (24 h).

Evaluation of the Effects of Lime-bassanite-charcoal Amendment on the Immobilization of Cadmium in Contaminated Soil.

The effects of amendments, such as lime, bassanite, sodium phosphate, steel slag and charcoal, and their compounds on the immobilization of cadmium (Cd) are investigated. The lime-bassanite-charcoal compound shows the best remediation performance compared to other agents in conducted experiments. The optimum condition for lime-bassanite-charcoal application in contaminated soil is lime-bassanite-charcoal with a mass ratio of 1:1/3:2/3, a dose of 2% of the soil weight, and a liquid-to-solid ratio of 35%-40%; additionally, the agents should be added before water addition. The highest Cd removal rate was 58.94% (±1.19%) with a ∆pH of 0.23, which is much higher than the rates reported in previous studies. The compound amendment was used in a field experiment, demonstrating a Cd removal efficiency of 48.78% (±4.23), further confirming its effectiveness.

Biocompatibility evaluation of sputtered zirconium-based thin film metallic glass-coated steels.

Thin film metallic glasses comprised of Zr48Cu36Al8Ag8 (at.%) of approximately 1.5 µm and 3 µm in thickness were prepared using magnetron sputtering onto medical grade 316L stainless steel. Their structural and mechanical properties, in vitro corrosion, and antimicrobial activity were analyzed. The amorphous thin film metallic glasses consisted of a single glassy phase, with an absence of any detectable peaks corresponding to crystalline phases. Elemental composition close to the target alloy was noted from EDAX analysis of the thin film. The surface morphology of the film showed a smooth surface on scanning electron microscopy and atomic force microscopy. In vitro electrochemical corrosion studies indicated that the zirconium-based metallic glass could withstand body fluid, showing superior resistance to corrosion and electrochemical stability. Interactions between the coated surface and bacteria were investigated by agar diffusion, solution suspension, and wet interfacial contact methods. The results indicated a clear zone of inhibition against the growth of microorganisms such as Escherichia coli and Staphylococcus aureus, confirming the antimicrobial activity of the thin film metallic glasses. Cytotoxicity studies using L929 fibroblast cells showed these coatings to be noncytotoxic in nature.

Corrosion mitigation of N-(2-hydroxy-3-trimethyl ammonium)propyl chitosan chloride as inhibitor on mild steel.

The biopolymer N-(2-hydroxy-3-trimethyl ammonium)propyl chitosan chloride (HTACC) was synthesised and its influence as a novel corrosion inhibitor on mild steel in 1M HCl was studied using gravimetric and electrochemical experiments. The compound obtained was characterised using FTIR and NMR studies. The inhibition efficiency increased with the increase in concentration and reached a maximum of 98.9% at 500 ppm concentration. Polarisation studies revealed that HTACC acts both as anodic and cathodic inhibitor. Electrochemical impedance studies confirmed that the inhibition is through adsorption on the metal surface. The extent of inhibition exhibits a negative trend with increase in temperature. Langmuir isotherm provides the best description on the adsorption nature of the inhibitor. SEM analysis indicated the presence of protective film formed by the inhibitor on the metal surface.

Effects of slag-based silicon fertilizer on rice growth and brown-spot resistance.

It is well documented that slag-based silicon fertilizers have beneficial effects on the growth and disease resistance of rice. However, their effects vary greatly with sources of slag and are closely related to availability of silicon (Si) in these materials. To date, few researches have been done to compare the differences in plant performance and disease resistance between different slag-based silicon fertilizers applied at the same rate of plant-available Si. In the present study both steel and iron slags were chosen to investigate their effects on rice growth and disease resistance under greenhouse conditions. Both scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to examine the effects of slags on ultrastructural changes in leaves of rice naturally infected by Bipolaris oryaze, the causal agent of brown spot. The results showed that both slag-based Si fertilizers tested significantly increased rice growth and yield, but decreased brown spot incidence, with steel slag showing a stronger effect than iron slag. The results of SEM analysis showed that application of slags led to more pronounced cell silicification in rice leaves, more silica cells, and more pronounced and larger papilla as well. The results of TEM analysis showed that mesophyll cells of slag-untreated rice leaf were disorganized, with colonization of the fungus (Bipolaris oryzae), including chloroplast degradation and cell wall alterations. The application of slag maintained mesophyll cells relatively intact and increased the thickness of silicon layer. It can be concluded that applying slag-based fertilizer to Si-deficient paddy soil is necessary for improving both rice productivity and brown spot resistance. The immobile silicon deposited in host cell walls and papillae sites is the first physical barrier for fungal penetration, while the soluble Si in the cytoplasm enhances physiological or induced resistance to fungal colonization.

Analysis of wear of polyethylene hip joint cup related to its positioning in patient's body.

Polyethylene parts of endoprosthesis are the weakest parts of each medical implant. They can be worn out within several years. During this period, a patient can enjoy good physical efficiency until the wear of polyethylene part limits his/her mobility. Then the reoperation is necessary and positioning of all parts of endoprosthesis has an effect on future patient's mobility and durability of implant. Elements of endoprosthesis during exploitation are heavily loaded both by normal and tangential forces and moments. In this paper, the dependence of wear of polyethylene cup on its positioning in pelvis is the major problem. Wear of the cup is determined by two measures: the depth and volume of a material rubbed off from the contact surface. The sensitivity of the depth of rubbing off is evaluated relative to two angles of anteversion and abduction, and radii of the cup. Numerical results are obtained by using Abaqus FE system with data related to patient's activity identified on the basis of medical reports.

Direct grafting of anti-fouling polyglycerol layers to steel and other technically relevant materials.

Direct grafting of hyperbranched polyglycerol (PG) layers onto the oxide surfaces of steel, aluminum, and silicon has been achieved through surface-initiated polymerization of 2-hydroxymethyloxirane (glycidol). Optimization of the deposition conditions led to a protocol that employed N-methyl-2-pyrrolidone (NMP) as the solvent and temperatures of 100 and 140 °C, depending on the substrate material. In all cases, a linear growth of the PG layers could be attained, which allows for control of film thickness by altering the reaction time. At layer thicknesses >5 nm, the PG layers completely suppressed the adhesion of albumin, fibrinogen, and globulin. These layers were also at least 90% bio-repulsive for two bacteria strains, E. coli and Acinetobacter baylyi, with further improvement being observed when the PG film thickness was increased to 17 nm (up to 99.9% bio-repulsivity on silicon).

Quantitative detection and biological propagation of scrapie seeding activity in vitro facilitate use of prions as model pathogens for disinfection.

Prions are pathogens with an unusually high tolerance to inactivation and constitute a complex challenge to the re-processing of surgical instruments. On the other hand, however, they provide an informative paradigm which has been exploited successfully for the development of novel broad-range disinfectants simultaneously active also against bacteria, viruses and fungi. Here we report on the development of a methodological platform that further facilitates the use of scrapie prions as model pathogens for disinfection. We used specifically adapted serial protein misfolding cyclic amplification (PMCA) for the quantitative detection, on steel wires providing model carriers for decontamination, of 263K scrapie seeding activity converting normal protease-sensitive into abnormal protease-resistant prion protein. Reference steel wires carrying defined amounts of scrapie infectivity were used for assay calibration, while scrapie-contaminated test steel wires were subjected to fifteen different procedures for disinfection that yielded scrapie titre reductions of ≤10(1)- to ≥10(5.5)-fold. As confirmed by titration in hamsters the residual scrapie infectivity on test wires could be reliably deduced for all examined disinfection procedures, from our quantitative seeding activity assay. Furthermore, we found that scrapie seeding activity present in 263K hamster brain homogenate or multiplied by PMCA of scrapie-contaminated steel wires both triggered accumulation of protease-resistant prion protein and was further propagated in a novel cell assay for 263K scrapie prions, i.e., cerebral glial cell cultures from hamsters. The findings from our PMCA- and glial cell culture assays revealed scrapie seeding activity as a biochemically and biologically replicative principle in vitro, with the former being quantitatively linked to prion infectivity detected on steel wires in vivo. When combined, our in vitro assays provide an alternative to titrations of biological scrapie infectivity in animals that substantially facilitates the use of prions as potentially highly indicative test agents in the search for novel broad-range disinfectants.

Comparison of microscopic methods for evaluating platelet adhesion to biomaterial surfaces.

Microscopic methods usable for sample surface imaging and subsequent qualitative and quantitative evaluation of platelet adhesion to the surface of the biomaterial studied were compared. It was shown, making use of the samples of medical steel (AISI 316L), that such tools as surface imaging with scanning electron microscopy (SEM), glutaraldehyde induced fluorescence technique (GIFT) and metallurgical microscopy (MM) are equivalent in evaluating surface platelet adhesion. The importance of biological variability of blood samples for a proper result assessment and the necessity of using internal standards were also considered.

Evaluation of various metallic coatings on steel to mitigate biofilm formation.

In marine environments and water systems, it is easy for many structures to form biofilms on their surfaces and to be deteriorated due to the corrosion caused by biofilm formation by bacteria. The authors have investigated the antibacterial effects of metallic elements in practical steels so far to solve food-related problems, using Escherichia coli and Staphylococcus aureus. However, from the viewpoint of material deterioration caused by bacteria and their antifouling measures, we should consider the biofilm behavior as aggregate rather than individual bacterium. Therefore, we picked up Pseudomonas aeruginosa and Pseudoalteromonas carageenovara in this study, since they easily form biofilms in estuarine and marine environments. We investigated what kind of metallic elements could inhibit the biofilm formation at first and then discussed how the thin films of those inhibitory elements on steels could affect biofilm formation. The information would lead to the establishment of effective antifouling measures against corrosion in estuarine and marine environments.

[The sprue behavior of nonprecious metals]. / Das Angussverhalten bei NE-Metallen.

As a base for single crowns and bridge anchors the individual casted construction combined with the manufactured root post offers undisputed advantages. At casting silver-palladium alloys, the root posts possibly may change the characteristic properties of their material. The casting reactions of sipal with cylindrical pins made of pure titanium (EMO Ti110) and root posts with adhesion head made of implant steel (URX2CrNiMoN18.12(0] was investigated. Interstice-free castings of sipal to pin from implant steel and titanium can be demonstrated by means of pictures of metallographic (grinding) specimens investigated by light- and electron-beam microscopy. The casting quality is identified mainly by selection of the embedding mass, the rise of the preheating temperature and period of preheating.