Ecotoxicity of the Adipate Plasticizers: Influence of the Structure of the Alcohol Substituent.

A significant increase in the production of plastic materials and the expansion of their areas of application contributed to the accumulation of a large amount of waste of polymeric materials. Most of the polymer composition is made up of plasticizers. Phthalate plasticizers have been recognized as potentially hazardous to humans and the environment due to the long period of their biodegradation and the formation of persistent toxic metabolites. It is known that the industrial plasticizer dioctyl adipate is characterized by reduced toxicity and a short biodegradation period. The paper describes the synthesis of a number of new asymmetric esters based on adipic acid and ethoxylated butanol by azeotropic esterification. The receipt of the products was confirmed by IR spectra. The physicochemical properties of the synthesized compounds were investigated. The glass transition temperatures of PVC composites plasticized with alkyl butoxyethyl adipates were determined using DSC analysis. The ecological safety of esters was assessed by the phytotesting method. Samples of adipates were tested for fungal resistance, and the process of their biodegradation in soil was also studied. It is shown that the synthesized esters have good plasticizing properties and are environmentally safe. When utilized under natural conditions, they can serve as a potential source of carbon for soil microorganisms and do not form stable toxic metabolites; therefore, they are not able to accumulate in nature; when the plasticizers under study are disposed of in the soil, toxic substances do not enter.

Efficient Catalysts for the Green Synthesis of Adipic Acid from Biomass.

Green synthesis of adipic acid from renewable biomass is a very attractive goal of sustainable chemistry. Herein, we report efficient catalysts for a two-step transformation of cellulose-derived glucose into adipic acid via glucaric acid. Carbon nanotube-supported platinum nanoparticles are found to work efficiently for the oxidation of glucose to glucaric acid. An activated carbon-supported bifunctional catalyst composed of rhenium oxide and palladium is discovered to be powerful for the removal of four hydroxyl groups in glucaric acid, affording adipic acid with a 99 % yield. Rhenium oxide functions for the deoxygenation but is less efficient for four hydroxyl group removal. The co-presence of palladium not only catalyzes the hydrogenation of olefin intermediates but also synergistically facilitates the deoxygenation. This work presents a green route for adipic acid synthesis and offers a bifunctional-catalysis strategy for efficient deoxygenation.

Fabrication of pH-Sensitive Tetramycin Releasing Gel and Its Antibacterial Bioactivity against Ralstonia solanacearum.

Ralstonia solanacearum (R. solanacearum)-induced bacterial wilt of the nightshade family causes a great loss in agricultural production annually. Although there has been some efficient pesticides against R. solanacearum, inaccurate pesticide releasing according to the onset time of bacterial wilt during the use of pesticides still hinders the disease management efficiency. Herein, on the basis of the soil pH change during R. solanacearum growth, and pH sensitivity of the Schiff base structure, a pH-sensitive oxidized alginate-based double-crosslinked gel was fabricated as a pesticide carrier. The gel was prepared by crosslinking oxidized sodium alginate (OSA) via adipic dihydrazide (ADH) and Ca2+. After loading tetramycin into the gel, it showed a pH-dependent pesticide releasing behavior and anti-bacterial activity against R. solanacearum. Further study also showed that the inhibition rate of the tetramycin-loaded gel was higher than that of industrial pesticide difenoconazole. This work aimed to reduce the difficulty of pesticide administration in the high incidence period of bacterial wilt and we believe it has a great application potential in nightshade production.

Zirconia-supported rhenium oxide as an efficient catalyst for the synthesis of biomass-based adipic acid ester.

Synthesis of adipic acid, a key monomer of nylon-66 and polyurethane, from biomass is highly attractive for establishing green and sustainable chemical processes. Here, we report that zirconia-supported rhenium oxide (ReOx/ZrO2) efficiently catalyses the deoxydehydration of cellulose-derived d-glucaric acid, offering adipic acid ester with a yield of 82% by combining with a Pd/C catalyst in subsequent reactions.

Organic Salts and Merrifield Resin Supported [PM12O40]3- (M = Mo or W) as Catalysts for Adipic Acid Synthesis.

Adipic acid (AA) was obtained by catalyzed oxidation of cyclohexene, epoxycyclohexane, or cyclohexanediol under organic solvent-free conditions using aqueous hydrogen peroxide (30%) as an oxidizing agent and molybdenum- or tungsten-based Keggin polyoxometalates (POMs) surrounded by organic cations or ionically supported on functionalized Merrifield resins. Operating under these environmentally friendly, greener conditions and with low catalyst loading (0.025% for the molecular salts and 0.001⁻0.007% for the supported POMs), AA could be produced in interesting yields.

Radiochromic film containing poly(hexa-2,4-diynylene adipate) as a radiation dosimeter.

A radiation-sensitive polymer poly(hexa-2,4-diynylene adipate) (PHDA) was synthesized and incorporated into polyvinyl butyral films for radiation dose measurements in the 0.5 - 60 kGy range. PHDA undergoes crosslinking polymerization upon exposure to γ-rays, which changes its color from very pale yellow to deep orange-yellow. The color change is directly related to the absorbed dose. The absorption spectrum of the irradiated films features one absorption band around 500 nm with a shoulder around 465 nm. With increasing absorbed dose, the two bands grow in intensity and move towards higher wavelengths. The dosimeter is nearly insensitive to variations of the humidity in the range of 0-54% and temperature in the range of 30-45 °C during irradiation. The color intensifies after irradiation, both in the dark and in the light at room temperature, which reflects the continuing crosslinking polymerization. However, at - 4 °C, the color intensity does not change with time.

Preparation of New Risperidone Depot Microspheres Based on Novel Biocompatible Poly(Alkylene Adipate) Polyesters as Long-Acting Injectable Formulations.

Risperidone (RIS)-loaded microspheres based on poly(alkylene adipate)s derived from dicarboxylic acids and different aliphatic diols were prepared by the oil in water emulsion and solvent evaporation method. Specifically, 3 polyesters, namely poly(ethylene adipate), poly(propylene adipate), and poly(butylene adipate), were prepared with the aid of a 2-stage melt-polycondensation method and characterized by gel permeation chromatography, proton nuclear magnetic resonance (1H NMR), differential scanning calorimetry, and X-ray diffraction analysis. Results showed that the molecular weight of the polyesters increased as the diol molecular weight increased, while all polymers were of semi-crystalline nature and the melting temperature was varying from 49.1°C to 51.8°C and 65.9°C for poly(propylene adipate), poly(ethylene adipate), and poly(butylene adipate), respectively. The particle size of the RIS-loaded microspheres varied from 10 to 100 µm depending on the polyester type and the drug loading, while X-ray diffraction analysis revealed amorphous active pharmaceutical ingredient in the cases of high drug-loaded microspheres. In vitro drug release studies along with scanning electron microscopy images of microspheres after the completion of dissolution process showed that in all cases RIS release was controlled by the glass transition temperature of polyesters and physical state of active pharmaceutical ingredients via diffusion.

Hydrogen Gas-Mediated Deoxydehydration/Hydrogenation of Sugar Acids: Catalytic Conversion of Glucarates to Adipates.

The development of a system for the operationally simple, scalable conversion of polyhydroxylated biomass into industrially relevant feedstock chemicals is described. This system includes a bimetallic Pd/Re catalyst in combination with hydrogen gas as a terminal reductant and enables the high-yielding reduction of sugar acids. This procedure has been applied to the synthesis of adipate esters, precursors for the production of Nylon-6,6, in excellent yield from biomass-derived sources.

N-Heterocyclic Carbene Catalyzed [3+2] Cycloaddition of Enals with Masked Cinnamates for the Asymmetric One-Pot Synthesis of Adipic Acid Derivatives.

A novel short entry to 3,4-disubstituted adipic acids has been developed by employing an asymmetric NHC-catalyzed [3+2] cycloaddition of enals with masked cinnammates in moderate to good yields and high stereoselectivities. The synthetic utility of the protocol was demonstrated by the basic conversion of the masked cyclopentanone intermediates to 3S,4S-disubstituted adipic acid precursors of pharmaceutically important gababutins.

Preparation of Protein Conjugates via Homobifunctional Diselenoester Cross-Linker.

Adipic acid diselenoester was developed as an efficient cross-linker for covalent protein conjugation with a variety of small molecular haptens, including mono- and disaccharides, peptide, fluorescence dye, and nicotine. Compared to the counterparts of N-hydroxysuccinimide (NHS) and p-nitrophenyl (PNP) linkers, the diselenoester linker demonstrates improved balance between reactivity and stability and coupling of haptens to proteins under mild conditions with high incorporation efficiency.

One-pot room-temperature conversion of cyclohexane to adipic acid by ozone and UV light.

Nitric acid oxidation of cyclohexane accounts for ~95% of the worldwide adipic acid production and is also responsible for ~5 to 8% of the annual worldwide anthropogenic emission of the ozone-depleting greenhouse gas nitrous oxide (N2O). Here we report a N2O-free process for adipic acid synthesis. Treatment of neat cyclohexane, cyclohexanol, or cyclohexanone with ozone at room temperature and 1 atmosphere of pressure affords adipic acid as a solid precipitate. Addition of acidic water or exposure to ultraviolet (UV) light irradiation (or a combination of both) dramatically enhances the oxidative conversion of cyclohexane to adipic acid.

Interconnected hyaluronic acid derivative-based nanoparticles for anticancer drug delivery.

Doxorubicin (DOX)-loaded nanoparticles (NPs) based on interconnected hyaluronic acid-ceramide (HACE) structure were fabricated and their anti-tumor efficacy was evaluated in vitro. Interconnected HACE was synthesized by cross-linking HACE with adipic acid dihydrazide (ADH) and its synthesis was identified by (1)H NMR analysis. DOX-loaded NPs with <200nm mean diameter, negative zeta potential, and spherical shape were prepared. Interconnected HACE-based NPs increased drug-loading capacity and in vitro drug release, compared to HACE-based NPs. DOX release was dependent on the environmental pH, implying the feasibility of enhancing drug release in tumor region and endosomal compartments. Synthesized interconnected HACE did not show cytotoxic effect up to 1000µg/ml concentration in NIH3T3 and MDA-MB-231 cells. In cellular uptake studies using confocal laser scanning microscopy (CLSM) and flow cytometry in MDA-MB-231 cells, higher uptake of DOX was observed in the interconnected HACE-based NPs than HACE NPs. In vitro anti-tumor efficacy was assessed by MTS-based assay, in which cytotoxic effect of DOX-loaded interconnected HACE NPs was higher than that of DOX-loaded HACE NPs. Thus, these results suggest the feasibility of interconnected HACE-based NPs to be used for efficient tumor-targeted delivery of anticancer drugs.

Synthesis of orthogonally protected (2S)-2-amino-adipic acid (α-AAA) and (2S,4R)-2-amino-4-hydroxyadipic acid (Ahad).

(2S,4R)-2-amino-4-hydroxyadipic acid (Ahad) building block 45 was synthesized in 11 steps and 6.5% overall yield from commercially available materials. Key steps in stereocontrol were an asymmetric conjugate addition employing a proline-based catalyst and a syn-selective intramolecular-conjugate addition of an oxygen nucleophile to an α,ß-unsaturated ester. To enable incorporation of α-amino-adipic acid (α-AAA) and Ahad into peptides, a truly orthogonal protecting group scheme was developed, encompassing an allyloxycarbonyl (Alloc) carbamate for Nα, a tert-butyl ester for the δ-COOH, an acetol ester for the α-COOH, and a tert-butyldimethylsilyl ether for the γ-hydroxy group of Ahad.

Continuous-flow synthesis of adipic acid from cyclohexene using hydrogen peroxide in high-temperature explosive regimes.

Safe only in a microreactor! The synthesis of adipic acid from cyclohexene by tungstic acid-catalyzed oxidation using hydrogen peroxide following the classical Noyori protocol can be accomplished in good yields with residence times as short as 20 min at 140 °C using a safe and scalable microreactor environment. Under these intensified conditions the use of a phase-transfer catalyst is not required.

Novel molecular anti-colorectalcancer conjugate:chlorambucil-adipic acid dihydrizide-glutamine.

Cancer is one of the most fatal diseases in the world and it has been years that finding new drugs and chemotherapeutic techniques with lowest side effects become one of the most important challenging matters needs really hard efforts. Chlorambucil (CBL), an ancient direct-acting alkylating anticancer agent, is commonly used for initial treatment of some kinds of cancers but the use of CBL is often limited because of the unpleasant side effects due to its lack of specificity for targeting cancer cells. In this research we tried to increase the specificity of CBL by producing a novel conjugate by using glutamine amino acid (Glut). Based on previous studies, poly amines and nitrogen compounds noticeably are used by cancer cells increasingly; therefore we decided to increase the efficiency and specificity of CBL by designing and producing a novel anti cancer conjugate using glutamine amino acid as an uptake enhancer, CBL, and Adipic acid Dihydrazide (ADH) as a spacer and linker. The biological tests were carried out on HT29 colorectal cancer cell line to evaluate its anticancer properties. Biological tests like MTT assay, finding IC50, evaluating the induced mechanism of the death of our novel CBL-Glutamine conjugate on HT29 cells, testing abnormal toxicity of this conjugate on mice in comparison with CBL drug were careid out. We found that not only CBL-Glutamine conjugate preserved its anti cancer property with regard to CBL drug, but also it represent lower abnormal toxicity in mice. Apoptosis was detected as its mechanism of the death. Our present study provides a promising strategy for targeting cancer cells using amino acids nano-conjugate drugs. The future perspectives have also been highlighted in continuing similar and relative researches.

In situ forming hydrogels composed of oxidized high molecular weight hyaluronic acid and gelatin for nucleus pulposus regeneration.

Encapsulation of nucleus pulposus (NP) cells within in situ forming hydrogels is a novel biological treatment for early stage intervertebral disc degeneration. The procedure aims to prolong the life of the degenerating discs and to regenerate damaged tissue. In this study we developed an injectable oxidized hyaluronic acid-gelatin-adipic acid dihydrazide (oxi-HAG-ADH) hydrogel. High molecular weight (1900 kDa) hyaluronic acid was crosslinked with various concentrations of gelatin to synthesize the hydrogels and their viscoelastic properties were analyzed. Interactions between the hydrogels, NP cells, and the extracellular matrix (ECM) were also evaluated, as were the effects of the hydrogels on NP cell gene expression. The hydrogels possess several clinical advantages, including sterilizability, low viscosity for injection, and ease of use. The viscoelastic properties of the hydrogels were similar to native tissue, as reflected in the complex shear modulus (∼11-14 kPa for hydrogels, 11.3 kPa for native NP). Cultured NP cells not only attached to the hydrogels but also survived, proliferated, and maintained their round morphology. Importantly, we found that hydrogels increased NP cell expression of several crucial ECM-related genes, such as COL2A1, AGN, SOX-9, and HIF-1A.

Theoretical insights into heme-catalyzed oxidation of cyclohexane to adipic acid.

Adipic acid is a key compound in the chemical industry, where it is mainly used in the production of polymers. The conventional process of its generation requires vast amounts of energy and, moreover, produces environmentally deleterious substances. Thus, there is interest in alternative ways to gain adequate amounts of adipic acid. Experimental reports on a one-pot iron-catalyzed conversion of cyclohexane to adipic acid motivated a theoretical investigation based on density functional theory calculations. The process investigated is interesting because it requires less energy than contemporary methods and does not produce environmentally harmful side products. The aim of the present contribution is to gain insight into the mechanism of the iron-catalyzed cyclohexane conversion to provide a basis for the further development of this process. The rate-limiting step of the process is discussed, but considering the accuracy of the calculations, it is difficult to ensure whether the rate-limiting step is in the substrate oxidation or in the generation of the catalytically active species. It is shown that the slowest step in the substrate oxidation is the conversion of cyclohexanol to cyclohexane-1,2-diol. Hydrogen-atom transfer from one of the OH groups of cyclohexane-1,2-diol makes the intradiol cleavage occur spontaneously.

Magnesium-mediated intramolecular reductive coupling: a stereoselective synthesis of C(2)-symmetric 3,4-bis-silyl-substituted adipic acid derivatives.

Chiral C(2)-symmetric 3,4-bis-silyl-substituted adipic acid derivatives have been synthesised by a Mg/trimethylsilyl chloride-mediated intramolecular reductive coupling of symmetrical disiloxanes of beta-silylacrylic acid N-oxazolidinone derivatives. Efficient and short syntheses of enantiomerically pure enantiomers of 2,6-dioxabicyclo[3.3.0]octane-3,7-dione have been achieved from the bis-silylated adipic acid derivatives using Fleming-Tamao oxidation as the key step.

Effectiveness of various drug carriers in controlled release formulations of raloxifene HCl prepared by melt mixing.

In the present study solid dispersions of Raloxifene HCl were prepared by melt mixing. As drug carriers, biodegradable/biocompatible aliphatic polyesters were used. These formulations were compared to those based on extensively used drug carriers such as PEG and Gelucire 50/13. The used aliphatic polyesters namely poly(propylene succinate) (PPSu) and poly(propylene adipate) (PPAd) were prepared by melt polycondensation. The polyesters have melting points close to human body temperature and were used for first time as drug carries. Polymer cytocompatibility based on HUVEC cells viability in the presence of increasing concentrations of polymer was investigated and it was found that PPSu and PPAd exhibit comparable cytocompatibility with poly(dl-lactide). The physical state of solid dispersions was evaluated by FTIR, SEM and XRD techniques. In all cases the interactions between drug and carriers are limited and thus the dispersed drug was mainly in the crystalline state. SEM revealed that the particles size of the dispersed drug increases with increasing the drug amount. The release behavior of the drug is affected from both the drug amount and the kind of the used carrier. The drug is released almost immediately from PEG formulations while Gelucire results in sustained release. In formulations that polyesters were used as drug carriers the release is slower.