Preparation of a polyhedral oligomeric silsesquioxane-based perfluorinated monolithic column.

A monolithic column with high affinity to fluorous compounds was prepared using a polyhedral oligomeric silsesquioxane (POSS) reagent as the cross-linker and pentadecafluorooctyl methacrylate (PDFOMA) as the functionality monomer. The pore properties and permeability could be tuned by the composition of the polymerization mixture. The characterization and evaluation results revealed that the obtained POSS-PDFOMA hybrid monolith owned the merits of POSS and PDFOMA with good mechanical stability, no residual silanol and high affinity to fluorous compounds. A series of perfluoroalkyl methacrylates were baseline resolved on the optimized monolithic column under isocratic elution of 70% acetonitrile aqueous solution. Such a resolution could not be achieved on a silica-based C18 monolithic column. A column efficiency of 30000N/m was observed. In addition, several perfluoroalkyl sulfonates were also baseline separated on the fluorous monolith applying 0.1% (v/v) acetic acid aqueous solution containing 75% acetonitrile as mobile phase without the addition of ammonium.

Preparation and purification of zinc sulfinate reagents for drug discovery.

The present protocol details the synthesis of zinc bis(alkanesulfinate)s that can be used as general reagents for the formation of radical species. The zinc sulfinates described herein are generated from the corresponding sulfonyl chlorides by treatment with zinc dust. The products may be used crude, or a simple purification procedure may be performed to minimize incorporation of water and zinc chloride. Although the synthesis of the zinc sulfinate salts can generally be completed within 3 h, workup can take up to 24 h and purification can take up to 3 h. Following the steps in this protocol would enable the user to generate a small toolkit of zinc sulfinate reagents over the course of 1 week.

Electric field-driven extraction of lipophilic anions across a carrier-mediated polymer inclusion membrane.

The use of a cationic carrier-mediated polymer inclusion membrane (PIM) for extraction and preconcentration of anionic model analytes driven by an electric field directly into an aqueous acceptor solution is demonstrated. The optimized membrane was 20 µm thick and consisted of 60% cellulose triacetate as base polymer, 20% o-nitrophenyl octyl ether as plasticizer, and 20% Aliquat 336 as cationic carrier in the perchlorate form. By applying voltages of up to 700 V across the membrane, the lipophilic model analytes propanesulfonate, octanesulfonate, and decanesulfonate could be transported from the aqueous donor solution to the aqueous acceptor solution with efficiences >90% within 5 to 20 min. A preconcentration factor of 26, defined by the volume ratio between donor and acceptor compartments of the current cell design, could be achieved. The utility of the method for analytical applications is demonstrated by extraction of the herbicide glyphosate and its breakdown product aminomethylphosphonic acid from spiked river water, followed by quantification with capillary electrophoresis using contactless conductivity detection. Limits of detection of 0.8 and 1.5 ng/mL were obtained for glyphosate and aminomethylphosphonic acid, respectively.

Enantiomeric separation of metolachlor and its metabolites using LC-MS and CZE.

The stereoisomers of metolachlor and its two polar metabolites [ethane sulfonic acid (ESA) and oxanilic acid (OXA)] were separated using liquid chromatography-mass spectrometry (LC-MS) and capillary zone electrophoresis (CZE), respectively. The separation of metolachlor enantiomers was achieved using a LC-MS equipped with a chiral stationary phase based on cellulose tris(3,5-dimethylphenyl carbamate) and an atmospheric pressure chemical ionization source operated under positive ion mode. The enantiomers of ESA and OXA were separated using CZE with gamma-cyclodextrin (gamma-CD) as chiral selector. Various CZE conditions were investigated to achieve the best resolution of the ESA and OXA enantiomers. The optimum background CZE electrolyte was found to consist of borate buffer (pH=9) containing 20% methanol (v/v) and 2.5% gamma-CD (w/v). Maximum resolution of ESA and OXA enantiomers was achieved using a capillary temperature of 15 degrees C and applied voltage of 30 kV. The applicability of the LC-MS and CZE methods was demonstrated successfully on the enantiomeric analysis of metolachlor and its metabolites in samples from a soil and water degradation study that was set up to probe the stereoselectivity of metolachlor biodegradation. These techniques allow the enantiomeric ratios of the target analytes to be followed over time during the degradation process and thus will prove useful in determining the role of chirality in pesticide degradation and metabolite formation.

Characterization and quantitation of mixtures of alkyl ether sulfates and carboxylic acids by capillary electrophoresis with indirect photometric detection.

The separation, characterization, and determination of mixtures of alkyl ether sulfates (AES) and fatty acids (C10-C16) in background electrolytes (BGEs) containing acetonitrile (ACN)-water mixtures is addressed. Due to inhibition of the ionization of the carboxylate groups, the migration time and the resolution between the fatty acids decreased when the water content of the BGE was reduced, but efficiency and resolution between the AES oligomers improved. The migration times increased and resolution improved by substituting 5% ACN by an equivalent amount of dioxane. A complete separation of the two surfactant classes, up to the AES oligomers with 8 ethylene oxide units (EOs) with respect to C10, with excellent resolution between the AES oligomers, while preserving a satisfactory resolution between the fatty acids, was achieved with a BGE containing 5 mM trimethoxybenzoic acid, 7 mM dipentylamine, 85% ACN, 5% dioxane, and 10% water. The two surfactant classes were increasingly resolved by further reducing the water content of the BGE. Thus, C2 (acetate) was resolved from the AES oligomers up to 7 EOs using 90% ACN and 5% dioxane, but the resolution between the heavier fatty acids was poor with this BGE. Identification of the AES oligomers was eased by the excellent regularity of the successive migration times; thus, within each AES subclass or series of oligomers with the same number of carbon atoms in the alkyl chain, the migration times decreased following a mild curve as the number of EOs increased. The way how the data obtained by indirect photometry (corrected peak areas that are proportional to the molar concentrations) should be managed to avoid systematic error when the calibration curve is constructed using an AES standard with an oligomer distribution different from that of the samples is discussed and equations are given. Decyl sulfate was successfully used as internal standard. The detection limits (S/N = 3) were of ca. 2 microM for individual AES oligomers.

Organosulfur compounds from garlic (Allium sativum) oxidizing canine erythrocytes.

The sulfurous acid ester, trans-sulfurous acid allyl ester 3-allylsulfanyl-allyl ester 8, along with two known thiosulfinates was isolated from the aqueous ethanol extract of garlic (Allium sativum). The chemical structure of 8 was determined on the basis of spectroscopic data including high resolution mass and two-dimensional NMR techniques. All of these compounds induced methemoglobin formation in a canine erythrocyte suspension in vitro resulting in the oxidation of canine erythrocytes. This is the first report of sulfurous acid ester showing oxidant activity in canine erythrocytes.

Mechanism of preferential enrichment, an unusual enantiomeric resolution phenomenon caused by polymorphic transition during crystallization of mixed crystals composed of two enantiomers.

The mechanism of Preferential Enrichment, an unusual enantiomeric resolution phenomenon observed upon recrystallization of a series of racemic crystals which are classified as a racemic mixed crystal with fairly ordered arrangement of the two enantiomers, has been studied. On the basis of the existence of polymorphs and the occurrence of the resulting polymorphic transition during crystallization from solution, the mechanism has been accounted for in terms of (1) a preferential homochiral molecular association to form one-dimensional chain structures in the supersaturated solution of the racemate or nonracemic sample with a low ee value, (2) a kinetic formation of a metastable crystalline phase retaining the homochiral chain structures in a process of nucleation, (3) a polymorphic transition from the metastable phase to a stable one followed by enantioselective liberation of the excess R (or S) enantiomers from the transformed crystal into solution at the beginning of crystal growth to result in a slight enrichment (up to 10% ee) of the opposite S (or R) enantiomer in the deposited crystals, together with an enantiomeric enrichment of the R (or S) enantiomer in the mother liquor, and (4) a chiral discrimination by the once formed S (or R)-rich stable crystalline phase in a process of the subsequent crystal growth, leading to a considerable enantiomeric enrichment of the R (or S) enantiomer up to 100% ee in the mother liquor. The processes (3) and (4) are considered to be directly responsible for an enrichment of one enantiomer in the mother liquor. The association mode of the two enantiomers in solution has been investigated by means of (i) the solubility measurement and (ii) the number-averaged molecular weight measurement in solution by vapor pressure osmometry, together with (iii) the molecular dynamics simulation of oligomer models. The polymorphic transition during crystallization has been observed visually and by means of the in situ FTIR technique and DSC measurement. Both metastable and stable crystals have been obtained, and their crystal structures have been elucidated by X-ray crystallographic analysis of their single crystals.

Separation and indirect detection of alkyl sulfonates and sulfates.

Iron(II) 1,10-phenanthroline, Fe(phen)3(2+), salts are used as mobile phase additives for the liquid chromatographic separation of alkyl sulfonates and sulfates on the reversed-phase PRP-1. As alkyl chain length increases retention increases. For a given chain length an alkyl sulfate is more retained than the corresponding alkyl sulfonate. Major elution variables that affect retention are mobile phase solvent and counteranion concentration. Indirect photometric detection is used to detect alkyl sulfonates and sulfates at 510 nm where Fe(phen)3(2+) salts absorb. Conditions for isocratic and gradient elution of multicomponent mixtures are described. Detection limits depending on analyte approached 0.1 nmol for isocratic elution and 3 nmol for gradient elution.

The structure of M-GTFI, an inhibitor of glucosyltransferase from S. mutans, and its inhibitory relationship with other sulfate ester-containing inhibitors.

M-GTFI, an inhibitor of glucosyltransferase from S. mutans was produced by Micromonospora narashinoensis strain No. 731. The isolation procedure for M-GTFI was improved and established for spectroscopic analyses, and some properties of the inhibitor were investigated. The structure of M-GTFI was shown to be trisodium [2-sulphonato-(E)-9-undecenyll-oxacyclotriacont-(E)-3- en-2-one, 16, 18-bis sulphonate. The chemical structure of M-GTFI was therefore similar to that of izumenolide which is a beta-lactamase inhibitor containing sulfate ester groups in its molecule. The inhibitory characteristics of M-GTFI were parallel to that of other inhibitory compounds containing sulphate esters but the spectrum of activity was wider.

Biosynthesis of the sulfonolipid 2-amino-3-hydroxy-15-methylhexadecane-1-sulfonic acid in the gliding bacterium Cytophaga johnsonae.

The biosynthesis of the sulfonolipid 2-amino-3-hydroxy-15-methylhexadecane-1-sulfonic acid (capnine) was studied by measuring the incorporation of possible precursors into the lipid by cells grown in the presence of precursors which were labeled with stable isotopes. Cells grown on yeast extract in the presence of DL-[3,3-2H2]serine contained 40.1 mol% of the protein-bound serine and 5.0 mol% of the protein-bound cysteine derived from the labeled serine. Cells grown in the presence of DL-[3,3-2H2]cystine acid contained 86.4 mol% of the molecules that had two deuteriums. These results are consistent with the possibility that biosynthesis of capnine occurs by the condensation of 13-methylmyristoyl-coenzyme A with cysteic acid, in a reaction analogous to the condensation of a palmitoyl-coenzyme A with serine to form 3-keto-sphinganine during the biosynthesis of sphingolipids.

Sulfonolipids of gliding bacteria. Structure of the N-acylaminosulfonates.

Earlier (Godchaux, W., and Leadbetter, E. R. (1980) J. Bacteriol. 144, 592-602; (1983) J. Bacteriol. 153, 1238-1246) we demonstrated that an unusual class of sulfonolipids are major components of the cell envelope of gliding bacteria of the genus Cytophaga and of closely related genera. One of these lipids, to which we have assigned the trivial name capnine, was purified and was shown to be 2-amino-3-hydroxy-15-methylhexadecane-1-sulfonic acid (which might also be named as 1-deoxy-15-methylhexadecasphinganine-1-sulfonic acid). Though capnine accumulates as such in the cells of some Capnocytophaga spp., most organisms of the Cytophaga-like genera contain, instead, sulfonolipids that are less polar than capnine. These less polar lipids have been purified from a Capnocytophaga sp., a marine Cytophaga sp., Cytophaga johnsonae, and a Flexibacter sp. Acid methanolysis of the lipids yielded both aminosulfonates and a collection of fatty acid methyl esters. The infrared absorption spectra of the lipids indicated that the fatty acids were in amide (and not ester) linkage to the aminosulfonates. In every instance, analysis by mass spectrometry and other methods revealed that most, if not all, of the aminosulfonates obtained by methanolysis were structurally identical to capnine (though small amounts of variants of that compound may be present in some cases). The less polar sulfonolipids are, therefore, predominantly N-fatty acyl capnines, 1-deoxy-1-sulfonic acid analogs of ceramides. The fatty acid methyl esters obtained from the lipids were heterogeneous, but in all cases were rich in hydroxylated fatty acyl groups, which constituted 66 to 95% of the total.