Mineral content, fatty acid composition, and volatile compounds of gluten-free tarhana formulated with different cereal and pulse flours.

This research was intended to determine the effect of different cereal and pulse flours and commercial gluten-free flour on the mineral content, fatty acid composition, and volatile compounds of the gluten-free tarhana (cereal-based fermented dry soup). In order to produce the gluten-free tarhana, white bean (BF), chickpea (CF), commercial gluten-free (GWF), yellow lentil (LF), and rice (RF) flours were used. The Mg, K, Al, and Mn contents of tarhanas obtained using different pulse and cereal flours were found to be quite high compared to tarhanas produced with commercial GWF. The utilization of different cereal and pulse flours in the tarhana formulation resulted in an increase in the percentage (30.37-51.47%) of the total polyunsaturated fatty acid (TPUFA). The highest (452.4 µg/g) and the lowest (241.17 µg/g) total concentration of all compounds were detected in BF and GWF, respectively. The highest number (21) of compounds belonged to terpenes and terpenoids, followed by acids, hydrocarbons, alcohols, aldehydes, esters, ketones, and alkanes. PRACTICAL APPLICATION: This study shows that cereal and pulse flours can be used to produce acceptable tarhana with improved nutritional quality in terms of mineral and fatty acid contents. The results of the current study may be useful and applicable to food manufacturers producing gluten-free products for celiac patients.

The forgotten role of food cultures.

Fermentation is one of if not the oldest food processing technique, yet it is still an emerging field when it comes to its numerous mechanisms of action and potential applications. The effect of microbial activity on the taste, bioavailability and preservation of the nutrients and the different food matrices has been deciphered by the insights of molecular microbiology. Among those roles of fermentation in the food chain, biopreservation remains the one most debated. Presumably because it has been underestimated for quite a while, and only considered - based on a food safety and technological approach - from the toxicological and chemical perspective. Biopreservation is not considered as a traditional use, where it has been by design - but forgotten - as the initial goal of fermentation. The 'modern' use of biopreservation is also slightly different from the traditional use, due mainly to changes in cooling of food and other ways of preservation, Extending shelf life is considered to be one of the properties of food additives, classifying - from our perspective - biopreservation wrongly and forgetting the role of fermentation and food cultures. The present review will summarize the current approaches of fermentation as a way to preserve and protect the food, considering the different way in which food cultures and this application could help tackle food waste as an additional control measure to ensure the safety of the food.

Optimum Processing Conditions for Bakasang Using the Response Surface Methodology with Central Composite Design (CCD).

<b>Background and Objective:</b> Bakasang is a typical food of North Sulawesi and its surroundings, made from fermented fish viscera. This food is made by fermentation so that it is rich in amino acids and polypeptides. This study aimed to determine the optimum processing conditions for Bakasang with Peroxide Value (PV) parameters based on Response Surface Methodology (RSM) with Central Composite Design (CCD). <b>Materials and Methods:</b> Viscera from fresh Skipjack tuna consisting of intestines, liver, heart and eggs were mixed with salt and left in a fermenter for varying times and temperatures to obtain Bakasang. The fermentation temperature, salt content, and fermentation time, determined based on the Central Composite Design (CCD), were variables in this study. Thus, 20 experiments consisted of eight quadratic points, six centre points and six axial points. <b>Results:</b> The results showed that the correlation test between temperature, salinity and fermentation time variables on PV were 0.521, 0.305 and 0.591. The regression test resulted in an R² value of 0.988. The model equation obtained was y = 4.35194 - 0.11363x₁- 0.07459x₂- 0.25300x₃+ 0.00157x₁₂+ 0.00310x₂₂ + 0.01571x₃₂ - 0.00064x₁x₂+ 0.00172x₁x₃ + 0.00340x₂x₃. The contour plot graph obtained from the experiment using CCD showed that the optimum processing conditions for Bakasang were at a temperature of 32.9324°C, salinity 10.2631% and fermentation time of 4.7793 days, which will produce Bakasang with an optimum PV of 1.51256 meq kg¹ sample. <b>Conclusion:</b> According to the findings of this study, the optimum temperature, salinity and fermentation time for producing Bakasang with a PV of 1.51256 meq kg¹ sample were 32.932°C, 10.263% and 4.779 days, respectively.

Application of colorimetric indicators to predict the fermentation stage of kimchi.

Cabbage kimchi, a popular side dish in Korean cuisine, produces several fermentation by-products (FBPs). Kimchi is praised for its flavor, taste, and texture when suitably fermented at 0.7% to 0.9% total acidity, or a pH of approximately 4.1. Beyond this acidity level, the quality of the product decreases, negatively impacting consumers' purchase preferences. Therefore, the current study seeks to develop an optimally fermented (OptF) kimchi indicator that can be inserted into product packaging to evaluate its utility at 4 and 10 °C. A gradual change in the total color difference (ΔE) was observed during the kimchi fermentation stage, and the highest ΔE values were observed at 4 (34.87) and 10 °C (37.99), after 9 weeks. Moreover, the color-change response function value F(Xc) was more linear at 4 and 10 °C (0.981 and 0.984, respectively) compared to the ΔE over time, during kimchi fermentation. Coefficients of determination for F(Xc)-carbon dioxide (0.983), F(Xc)-pH (0.979), and F(Xc)-titratable acidity (0.974) were sufficient to meet the optimal polynomial regression model, while that for F(Xc)-lactic acid bacteria (0.881) was not. Standardized residuals of predicted data indicated that 95% of the residuals were in the range of -2.0 to 2.0. The regression analysis further suggested that the OptF kimchi indicator could be used as a kimchi fermentation indicator. PRACTICAL APPLICATION: Cabbage kimchi, a traditional Korean fermented food, produces several fermentation by-products. After the optimal fermenting stage, the sensory evaluation of cabbage kimchi and consumers' purchase preference decreases. This study describes an optimally fermented kimchi indicator and its utility at 4 and 10 °C. Our results demonstrate the ability of this indicator to predict the freshness and fermentation stage of kimchi without the need for sensory evaluation. This method could help increase the purchase preference for commercial kimchi.

Influence of different temperatures on brining kinetics, salt concentration and texture properties of Chinese cabbage (Brassica rapa L. ssp. pekinensis) during brining with ultrasonic treatment.

The effects of ultrasound treatment at different temperatures (4, 10, and 25 ℃) on the brining process of Chinese cabbage were investigated based on their salt diffusion coefficients and texture profiles. Salt weight increased significantly, but water weight decreased in Chinese cabbage treated with ultrasound at increasing temperatures. According to Fick's second equation, the effective diffusion coefficient of Chinese cabbage showed a notable increase as temperature was increased. High temperature caused unfavorable texture properties, and among these, hardness showed the most significant decrease when brining temperature was set at 25 °C. Consequently, results from the texture profile analysis and brining kinetics modeling suggest that optimal brining conditions could be achieved at 10 °C. At this temperature, the diffusion coefficient of Chinese cabbage is higher, the brining time is reduced, and the preferred qualities of kimchi are preserved. PRACTICAL APPLICATION: Ultrasonication is an effective technology that can be utilized in kimchi manufacturing. It presents the advantage of reducing brining time while maintaining the acceptable textural properties of kimchi. This study investigated the impact of different temperatures on the texture properties and brining times of Chinese cabbage during brining and reveal a practical application worthy of further study in food industries and provide valuable information for improving the quality of kimchi.

Assessment of commercial companion animal kefir products for label accuracy of microbial composition and quantity.

Kefir is a fermented beverage containing yeast and bacteria produced by the fermentation of water or milk with kefir grains. Lack of regulation for probiotic-containing fermented food sold for companion dogs and cats creates the potential for misreporting on viable microbial counts, taxonomy, and label claims. In this study, the microbiota of six companion animal kefir products were measured quantitatively using standard plating techniques. Microbial composition of these products was also characterized by using high-resolution, long-read amplicon sequencing of the 16S rRNA gene. Five products (83%) listed specific microorganisms, and four products (66%) guaranteed colony forming units (CFU)/g on their label. To enumerate viable lactic acid bacteria (LAB), two lots of each homogenized product were plated upon opening and following 14 d on deMan Rogosa and Sharpe (MRS) agar and incubated under anaerobic and aerobic conditions. Results from point of opening revealed that all commercial kefir products with a guaranteed CFU/g overstated the number of microorganisms present by at least 1 log, with only one product exceeding 1 × 109 CFU/g. Sequencing results demonstrated that none of the labels claiming specific bacterial genera and species on their labels were correct, and all products contained at least three additional bacterial species above the minimum detectable threshold (0.001% relative abundance) that were not disclosed by the manufacturer. In addition to the incorrect viable CFU and bacterial taxonomies, several of the product labels and websites contained a wide range of health claims, none of which are supported by the companion animal literature. Our results demonstrate a low level of accuracy in the labeling of commercial kefir products intended for use in dogs and cats. Regulatory agencies, veterinarians, pet food professionals, and pet owners must scrutinize these products and demand a higher level of accuracy and quality in the future.

Probiotic Enrichment and Reduction of Aflatoxins in a Traditional African Maize-Based Fermented Food.

Fermentation of food products can be used for the delivery of probiotic bacteria and means of food detoxification, provided that probiotics are able to grow, and toxins are reduced in raw materials with minimal effects on consumer acceptability. This study evaluated probiotic enrichment and detoxification of kwete, a commonly consumed traditional fermented cereal beverage in Uganda, by the use of starter culture with the probiotic Lactobacillus rhamnosus yoba 2012 and Streptococcus thermophilus C106. Probiotic kwete was produced by fermenting a suspension of ground maize grain at 30 °C for a period of 24 h, leading to a decrease of the pH value to ≤ 4.0 and increase in titratable acidity of at least 0.2% (w/v). Probiotic kwete was acceptable to the consumers with a score of ≥6 on a 9-point hedonic scale. The products were stable over a month's study period with a mean pH of 3.9, titratable acidity of 0.6% (w/v), and Lactobacillus rhamnosus counts >108 cfu g-1. HPLC analysis of aflatoxins of the water-soluble fraction of kwete indicated that fermentation led to an over 1000-fold reduction of aflatoxins B1, B2, G1, and G2 spiked in the raw ingredients. In vitro fluorescence spectroscopy confirmed binding of aflatoxin B1 to Lactobacillus rhamnosus with an efficiency of 83.5%. This study shows that fermentation is a means to enrich with probiotics and reduce widely occurring aflatoxin contamination of maize products that are consumed as staple foods in sub-Saharan Africa.

Predicting chemical, enzymatic and nutritional properties of fermented barley (Hordeum vulgare L.) by second derivate spectra analysis from attenuated total reflectance-Fourier transform infrared data and its nutritional value in Japanese quails.

Nutrient concentrations, enzyme activities, viable probiotic counts and organic acid levels of fermented barley (FB) produced by solid state fermentation (SSF) and of its unfermented counterpart (unfermented barley (UFB)) were determined by quantitative methods, and compared with the second derivate spectra analysis (SDSA) of their attenuated total reflectance-Fourier transform infrared measurements. Moreover, in order to test the nutritional value of FB and UFB feeds, 3-d old Japanese quails were fed FB or UFB at 400 g/kg diet for 4 weeks. Chemical analysis indicated that FB had significantly increased crude protein, ether extract and ash contents, associated with lowered fibre and sugar contents, as compared with UFB. IR spectra pattern of FB and UFB samples were similar, but their SDSA parameters, particularly peak areas, differed significantly. The differences between FB and UFB in peak areas were highly correlated with the differences between two feeds in lipid, protein, total fibre, starch and sugar contents (p < 0.05). Furthermore, SDSA analysis found new peak areas only available in FB samples, indicating fortification with new biomolecules due to the effect of SSF. Feeding the FB containing diet for 3 or 4 weeks enhanced growth performance significantly and increased the carcass yield of quails, indicating its nutritional benefits in young growing quails. The results indicated that the further analysis of IR spectra data revealed important information on the chemical and biological properties of feed materials, which are found to be highly correlated with the results of compositional analysis and their biological value in animal model.