Incidence, mortality and survival in malignant pleural mesothelioma before and after asbestos in Denmark, Finland, Norway and Sweden.

BACKGROUND: Malignant pleural mesothelioma (MPM) is a rare but fatal cancer, which is largely caused by exposure to asbestos. Reliable information about the incidence of MPM prior the influence of asbestos is lacking. The nationwide regional incidence trends for MPM remain poorly characterized. We use nationwide MPM data for Denmark (DK), Finland (FI), Norway (NO) and Sweden (SE) to assess incidence, mortality and survival trends for MPM in these countries. METHODS: We use the NORDCAN database for the analyses: incidence data were available from 1943 in DK, 1953 in FI and NO and 1958 in SE, through 2016. Survival data were available from 1967 through 2016. World standard population was used in age standardization. RESULTS: The lowest incidence that we recorded for MPM was 0.02/100,000 for NO women and 0.05/100,000 for FI men in 1953-57, marking the incidence before the influence of asbestos. The highest rate of 1.9/100,000 was recorded for DK in 1997. Female incidence was much lower than male incidence. In each country, the male incidence trend for MPM culminated, first in SE around 1990. The regional incidence trends matched with earlier asbestos-related industrial activity, shipbuilding in FI and SE, cement manufacturing and shipbuilding in DK and seafaring in NO. Relative 1-year survival increased from about 20 to 50% but 5-year survival remained at or below 10%. CONCLUSION: In the Nordic countries, the male incidence trends for MPM climaxed and started to decrease, indicating that the prevention of exposure was beneficial. Survival in MPM has improved for both sexes but long-term survival remains dismal.

Analysis of workplace compliance measurements of asbestos by the U.S. Occupational Safety and Health Administration (1984-2011).

The United States Occupational Safety and Health Administration (OSHA) maintains the Chemical Exposure Health Data (CEHD) and the Integrated Management Information System (IMIS) databases, which contain quantitative and qualitative data resulting from compliance inspections conducted from 1984 to 2011. This analysis aimed to evaluate trends in workplace asbestos concentrations over time and across industries by combining the samples from these two databases. From 1984 to 2011, personal air samples ranged from 0.001 to 175 f/cc. Asbestos compliance sampling data associated with the construction, automotive repair, manufacturing, and chemical/petroleum/rubber industries included measurements in excess of 10 f/cc, and were above the permissible exposure limit from 2001 to 2011. The utility of combining the databases was limited by the completeness and accuracy of the data recorded. In this analysis, 40% of the data overlapped between the two databases. Other limitations included sampling bias associated with compliance sampling and errors occurring from user-entered data. A clear decreasing trend in both airborne fiber concentrations and the numbers of asbestos samples collected parallels historically decreasing trends in the consumption of asbestos, and declining mesothelioma incidence rates. Although air sampling data indicated that airborne fiber exposure potential was high (>10 f/cc for short and long-term samples) in some industries (e.g., construction, manufacturing), airborne concentrations have significantly declined over the past 30 years. Recommendations for improving the existing exposure OSHA databases are provided.

Asbestos is still with us: repeat call for a universal ban.

All forms of asbestos are proven human carcinogens, causing malignant mesothelioma and a host of other types of cancers. No exposure to asbestos is without risk; there is no safe threshold of exposure to asbestos. When evidence of the carcinogenicity of asbestos became incontrovertible, a worldwide ban was called for on asbestos use, mining, and manufacturing. Asbestos is now banned in 52 countries. Nonetheless, many countries still use, import, and export asbestos and asbestos-containing products; many countries that have banned other forms of asbestos still permit the use of chrysotile asbestos. This exemption has no basis in medical science, but reflects the political and economic influence of the asbestos industry. To protect the health of all people, the Collegium Ramazzini calls again on all countries of the world to join in the international endeavor to ban all forms of asbestos. An international ban on asbestos is urgently needed.

Identification and enumeration of asbestos fibers in the mining environment: mission and modification to the Federal Asbestos Standard.

Since the promulgation of the first Federal Asbestos Standard by the Occupational Safety and Health Administration in 1972, other federal agencies have modified the standard to better carry on their own unique missions. The instruments used to identify and measure asbestos, the sampling protocol, and the criteria used to define asbestos, have been modified to some degree. The Mine Safety and Health Administration regulates and controls asbestos dust in the mining and mineral commodity industries. However, crushed stone and processed ores contain mineral fragments that are frequently difficult to distinguish from asbestos. Mineral nomenclature, instruments for particle analysis, and sampling strategy must be accommodated to some degree to make asbestos control workable and meaningful. Precedent in other agencies has made consideration of these changes possible. Newly identified amphibole asbestos minerals have further complicated the agency's regulatory charge. Changes in its Asbestos Standard are now being considered. Crushed taconite ore in the Eastern Mesabi highlights many of these issues.

Changes in B-readings over time in the United States Navy Asbestos Medical Surveillance Program.

OBJECTIVE: To study the impact of variability among B-readers on clinical occupational medicine. METHODS: A total of 419,770 B-reading reports from February 1980 to May 2004 in the US Navy Asbestos Medical Surveillance Program were analyzed for changes in category from the previous B-reading on each individual worker. RESULTS: Over 7% of films were categorized as worse (ie, read as going from negative to positive), and over 6% were categorized as better. When profusion categories were reported as different from the previous reading (over 6% of the time), they were more frequently read as 2 or more minor categories worse or better. CONCLUSIONS: Changes from previous B-readings are common, and may have clinical and other implications, which are discussed. B-readings should not be used as the sole basis for determining the presence or absence of pneumoconiosis.

Asbestos exposure during routine brake lining manufacture.

Occupational exposure to asbestos fiber and total dust of workers of a major brake lining manufacture plant in a developing country were examined and compared with those in developed countries. Time weighted average of total dust and asbestos fiber concentration in the potential sources of exposure were monitored. All personal air sampling were collected on membrane filters and analyzed by phase contrast optical microscopy (PCM) for comparison with the occupational safety and health administration (OSHA) permissible exposure limit (PEL) of 0.1 f/cc, 8-h time--weighted average. This study demonstrates that routine mixing, polishing and beveling process in the brake lining production can result in elevated levels of airborne asbestos. Greater releases of airborne asbestos were observed during mixing process and mixer machine. The results also showed that the employees working in the process had the exposure to total dust concentrations ranging from 2.08 to 16.32 mg/m(3) that is higher than OSHA, recommendation. According to OSHA definition of fibers, it has been indicated that from 3,000 counted particles, 90% of particles are in the form of non-fiber and reaming have fiber-shaped. The particle analyze gives the geometric mean diameter as 6.02 mum, and also indicated that the arithmetic mean of the number distribution for the particle population was 8.4 mum. Approximately 60.4% of the counted fibers were lower than 10 mum in length, from which only 8% consists of fibers (>5 mum in length). In conclusion, the analysis showed a presence in the air of only chrysotile asbestos and an absence of other types of asbestos. During an 8-h shift, the average asbestos fiber exposure (0.78 f/cc) were 7.8 time in excess of OSHA PEL. Additional studies in occupational exposure to asbestos are needed.

Ongoing regulatory compliance required.

New regulations concerning the management of asbestos in non-residential properties came into force in May last year, and this 'Duty to Manage' legislation means that duty holders should be managing their asbestos adequately by fulfilling certain criteria. Inadequate management of asbestos could lead to heavy fines. Special report by Peter Harris, client services manager, Redhill Analysts.

Double standards: the multinational asbestos industry and asbestos-related disease in South Africa.

This study documents and contrasts the development of knowledge about asbestos-related disease (ARD) in South Africa and the United Kingdom. It also contributes to the globalization debate by exploring corporate decision-making in a multinational industry. Between the 1930s and 1960s, the leading U.K. asbestos companies developed a sophisticated knowledge of ARD, though in South Africa, where the leading companies such as Turner & Newall and Cape Asbestos owned mines, there was little attempt to apply this knowledge. Asbestos mines (and their environments) in South Africa were uniquely dusty and ARD was rife. Social and political factors in South Africa, especially apartheid, allowed these companies to apply double standards, even after 1960 when the much more serious hazard of mesothelioma was identified. This shows the need for greater regulation of multinationals. Because of the lack of such regulation in the early 1960s, an opportunity was lost to prevent the current high morbidity and mortality of ARD both in South Africa and worldwide.

The British approach to asbestos standard setting: 1898-2000.

BACKGROUND: The asbestos industry started in the late 1870s, and the first accounts of severe respiratory disease in its workers were published in England (1898, 1906), France (1907), and Italy (1908). For a hundred years, a series of increasingly lower standards were set for asbestos in Britain: initially they purported to prevent asbestosis, and latterly to reduce asbestosis and malignancies to acceptable levels. METHODS: Published accounts of how British asbestos exposure standards came to be derived are reviewed in the light of archival materials originated by industry and government. RESULTS: The earliest standard, of necessity, was not evidence based and while subsequent standards purported to relate doses to effects, the indifferent quality of the measurement of dose, and the poor discrimination of effects, militated against arriving at a standard in which trust should be placed. Each successive standard that was accepted, conformed to what could be achieved in production processes, as far as it was reasonably practicable on technological and economic grounds. CONCLUSIONS: For the better part of a hundred years, confidence was misplaced in the ability of process engineers and physicians to protect workers against asbestos. Finally, deciding that asbestos was neither technologically nor economically essential, and was unsafe in use, Europe issued a Directive, to which Britain will conform, that will virtually ban it use throughout the Community by 2006.

[Regulations of controlled use of asbestos-containing materials in construction industry]. / Normativnoe obespechenie kontroliruemogo ispol'zovaniia asbestosoderzhashchikh materialov v stroitel'stve.

The article deals with analysis of Russian Federation Law on safety concerning use of asbestos and asbestos-containing materials in construction of nonindustrial objects. The authors present recommendations on the law improvement for implementation of ILO Convention No. 162 on safety of work with asbestos in Russia.

Asbestos an important insulating material; its varieties, properties and safe uses.

Asbestos, a naturally occurring mineral, has been widely utilized in industries producing cement, pipes, roofing sheet and insulating materials. In spite of sharp decrease in the production of asbestos worldwide, the use of asbestos in various products is increasing in the developing countries of Asian-African region, due to their magical properties of commercial importance. This paper describes the various physical & chemical properties, health hazards of the asbestos fibre and its utilization in various product development.

[Content of asbestos fibers in water sources of the Bazhenovo deposit]. / Soderzhanie volokon asbesta v vodoistochnikakh Bazhenovskogo mestorozhdeniia.

The paper provides preliminary measurements of asbestos levels in water sources from an area of the Bazhenovo chrysotile-asbestos deposit. All study water samples have been found to contain chrysotile-asbestos fibers at concentrations one-three orders less that the values standardized in the USA (7 x 10(6) vol/l). The authors consider it advisable to continue studies to measure asbestos levels in the water sources in the areas in vicinity of other Russian deposits.