Non-Typical Fluorescence Effects and Biological Activity in Selected 1,3,4-thiadiazole Derivatives: Spectroscopic and Theoretical Studies on Substituent, Molecular Aggregation, and pH Effects.

The below article presents the results of spectroscopic research, theoretical (time-dependent density functional theory (TD-DFT)), microbiological, and antioxidative calculations for three compounds from the group of 1,3,4-thiadiazoles: 2-amino-5-phenyl-1,3,4-thiadiazole (TB), 2-amino-5-(2-hydroxyphenyl)-1,3,4-thiadiazole (TS), 2-amino-5-(2-hydroxy-5-sulfobenzoyl)-1,3,4-thiadiazole (TSF). In the fluorescence emission spectra (TS) of solutions with varying concentrations of hydrogen ions, a particularly interesting effect of dual fluorescence was observed. The aforementioned effect was observed even more clearly in the environment of butan-1-ol, relative to the compound's concentration. Depending on the modification of the resorcylic substituent (TS and TSF), we observed the emergence of two separate, partially overlapping, fluorescence emission spectra or a single emission spectrum. Interpretation of the obtained spectra using stationary and time-resolved spectroscopy allowed the correlation of the effect's emergence with the phenomenon of molecular aggregation (of a particular type) as well as, above all, the structure of the substituent system. The overlap of said effects most likely induces the processes related to the phenomenon of charge transfer (in TS) and is responsible for the observed fluorescence effects. Also, the position of the -OH group (in the resorcylic ring) is significant and can facilitate the charge transfer (CT). The determinations of the changes in the dipole moment and TD-DFT calculations further corroborate the above assumption. The following paper presents the analysis (the first for this particular group of analogues) of the fluorescence effects relative to the changes in the structure of the resorcylic group combined with pH effects. The results of biological studies also indicate the highest pharmacological potential of the analogue in the case where the effects of dual fluorescence emission are observed, which predisposes this particular group of fluorophores as effective fluorescence probes or potential pharmaceuticals with antimycotic properties.

Light-Induced Transformation of the Aromatic Heptaene Antifungal Antibiotic Candicidin D into Its All-Trans Isomer.

Illumination of the aromatic heptaene macrolide antifungal antibiotic candicicin D with UV light results in an isomerization of the molecule. The product formed after irradiation of the candicidin complex with UV light (λ = 365 nm), namely, iso-candicidin D, was isolated and subjected to 2D NMR studies, consisting of DQF-COSY, ROESY, TOCSY, HSQC, and HMBC experiments. The obtained spectral data unambiguously evidenced that iso-candicidin D was the all-trans isomer of the native antibiotic, and straightening of the heptaenic chromophore was the only light-induced structural change that occurred. Hence, iso-candicidin D was proclaimed to be a prototype of a novel class of polyene macrolide antifungal antibiotics: the all-trans aromatic heptaenes, containing a macrolide ring similar to that of amphotericin B.

Enhanced UV protection of ketoconazole using Hyptis suaveolens micro emulsion.

Ketoconazole is photolabile antifungal drug. Photochemical reactions may decrease its therapeutic effect or induce toxic compounds. The aim of this study was to prepare ketoconazole loaded microemulsion containing H. suaveolens oil with antifungal and antioxidant powers in order to obtain effective antifungal formulation. The release study, antifungal activity and photostability test, were then evaluated. The results showed that optimized Hyptis suaveolens microemulsion for ketoconazole loading was selected through construction of pseudo-ternary phase diagrams. It consisted of 12.5% H. suaveolens oil, 12.5% capryol, 25% tween 80, 25% ethanol and 25% water. Mean globule size was 153 nm, as analyzed by photon correlation spectroscopy. Ketoconazole-loaded Hyptis suaveolens microemulsion and Hyptis suaveolens microemulsion had antifungal activity against Candida albican, Microsporum gypseum and Trichophyton mentagrophyte, showing inhibition zone ranged from 28-37 mm and 23-32 mm, respectively. Ketoconazole was released from Hyptis suaveolens microemulsion more than 90% within 5 days. In the results of photostability test, ketoconazole-loaded Hyptis suaveolens microemulsion gave significantly higher remaining ketoconazole than ketoconazole solution. This study demonstrated that Hyptis suaveolens microemulsion could be used to improve the photoprotection of photolabile drug.

The Influence of Accelerated UV-A and Q-SUN Irradiation on the Antimicrobial Properties of Coatings Containing ZnO Nanoparticles.

The influence of accelerated UV-A and Q-SUN irradiation on the antimicrobial properties of coatings containing ZnO nanoparticles was investigated using a polyethylene (PE) film covering. The results of the study showed that Methyl Hydroxypropyl Celluloses (MHPC) coatings did not influence the growth of S. aureus, B. cereus, E. coli, P. aeruginosa or C. albicans cells. MHPC coatings containing ZnO nanoparticles inhibited the growth of bacterial strains and reduced the number of C. albicans strains. Accelerated Q-SUN and UV-A irradiation had no influence on the antimicrobial effect of nano ZnO coatings against S. aureus, B. cereus and E. coli. Q-SUN irradiation decreased the activity of MHPC coatings containing nanoparticles against P. aeruginosa and C. albicans. An FT-IR analysis clearly showed that ZnO nanoparticles shielded the MHPC coating during Q-SUN irradiation.

Gamma irradiation of 2-mercaptobenzothiazole aqueous solution in the presence of persulfate.

Recently, water treatment by ionizing radiation has gained increasing attention as a powerful technology for the destruction of refractory pollutants. 2-Mercaptobenzothiazole (MBT) is known as a widespread, toxic and poorly biodegradable pollutant. This paper studied the gamma irradiation of aqueous solutions of MBT. Moreover, the effect of the addition of persulfate (S2O8(2-)) on the radiolytic destruction of MBT was investigated. The main transformation products of the studied compound were detected and the sequence of occurrence of the products was described. The change of biodegradability of MBT solution was also observed. The main results obtained in this study indicated that gamma radiation was effective for removing MBT in aqueous solution. Persulfate addition, which induced the formation of reactive sulfate radicals (SO4(-)), greatly enhanced the degradation of MBT. Benzothiazole was identified as the first radiation product, followed by 2-hydroxybenzothiazole. Decomposition of MBT started with the oxidation of -SH groups to sulfate ions. Possible pathways for MBT decomposition by gamma irradiation were proposed. The BOD/COD ratios of MBT samples were increased after radiation, indicating the improvement of biodegradability and reduction of toxicity.

Enhancement of Echinocandin B Production by a UV- and Microwave-Induced Mutant of Aspergillus nidulans with Precursor- and Biotin-Supplying Strategy.

Echinocandin B belongs to lipopeptide antifungal antibiotic bearing five types of direct precursor amino acids including proline, ornithine, tyrosine, threonine, and leucine. The objective of this study is to screen over-producing mutant in order to improve echinocandin B production; a stable mutant Aspergillus nidulans ZJB12073, which can use fructose as optimal carbon source instead of expensive mannitol, was selected from thousand isolates after several cycles of UV and microwave irradiation in turn. The results showed that mutant strain ZJB12073 exhibited 1.9-fold improvement in echinocandin B production to 1656.3 ± 40.3 mg/L when compared with the parent strain. Furthermore, the effects of precursor amino acids and some chemicals on echinocandin B biosynthesis in A. nidulans were investigated, respectively. Tyrosine, leucine, and biotin were selected as key factors to optimize the medium employing uniform design method. The results showed that the optimized fermentation medium provided another 63.1 % increase to 2701.6 ± 31.7 mg/L in final echinocandin B concentration compared to that of unoptimized medium.

Time-of-flight mass spectrometry assessment of fluconazole and climbazole UV and UV/H2O2 degradability: Kinetics study and transformation products elucidation.

The efficiency of UV irradiation for the removal of the antimycotic drugs fluconazole (FCZ) and climbazole (CBZ) from water samples is evaluated. Degradation experiments, at laboratory scale, were carried out with spiked aliquots of ultrapure water solutions and treated wastewater samples using low-pressure mercury lamps emitting at 254 nm. Time course of precursor pollutants and identification of arising transformation products (TPs) was performed by injection of different reaction time aliquots in a liquid chromatography quadrupole time-of-flight mass spectrometry (LC-QTOF-MS) system. Chemical structures of identified TPs were proposed from their full-product ion spectra, acquired using different collision energies. During UV irradiation experiments, the half-lives (t1/2) of FCZ and CBZ were similar in ultrapure water solutions and wastewater samples; however, the first species was more recalcitrant than the second one. Four TPs were identified in case of FCZ resulting from substitution of fluorine atoms by hydroxyl moieties and intramolecular cyclization with fluorine removal. CBZ interacted with UV radiation through reductive dechlorination, hydroxylation and cleavage of the ether bond; moreover, five additional primary TPs, with the same empirical formula as CBZ, were also noticed. Given the relatively long t1/2 of FCZ under direct photolysis (ca. 42 min), UV irradiation was combined with H2O2 addition to promote formation of reactive hydroxyl radicals. Under such conditions, the degradation rate of FCZ was enhanced significantly and no TPs were detected. These latter conditions allowed also the effective removal of CBZ TPs.

UV-curable gel formulations: Potential drug carriers for the topical treatment of nail diseases.

Nail diseases are common, cause significant distress and treatments are far from successful. Our aim was to investigate the potential of UV-curable gels - currently used as cosmetics - as topical drug carriers for their treatment. These formulations have a long residence on the nail, which is expected to increase patient compliance and the success of topical therapy. The gels are composed of the diurethane dimethacrylate, ethyl methacrylate, 2-hydroxy-2-methylpropiophenone, an antifungal drug (amorolfine HCl or terbinafine HCl) and an organic liquid (ethanol or NMP) as drug solvent. Following its application to a substrate and exposure to a UVA lamp for 2 min, the gel polymerises and forms a smooth, glossy and amorphous film, with negligible levels of residual monomers. No drug-polymer interactions were found and drug loading did not affect the film's properties, such as thickness, crystallinity and transition temperatures. In contrast, the organic solvent did influence the film's properties; NMP-containing films had lower glass transition temperatures, adhesion and water resistance than ethanol-based ones. Water-resistance being a desired property, ethanol-based formulations were investigated further for stability, drug release and ungual permeation. The films were stable under accelerated stability testing conditions. Compared to terbinafine, amorolfine was released to a greater extent, had a higher ungual flux, but a lower concentration in the nailplate. However, both drugs were present at considerably high levels in the nail when their MICs are taken into account. We thus conclude that UV-curable gels are promising candidates as topical nail medicines.

Identification of antimycotic drugs transformation products upon UV exposure.

The reactivity of three imidazolic, environmental persistent antimycotic drugs (clotrimazole, CTZ; ketoconazole, KTZ; and miconazole, MCZ) upon exposure to ultraviolet (UV) radiation is discussed. First, precursor compounds were immobilized in a silicone support which was further exposed to UV light at two different wavelengths: 254 and 365 nm. After solvent desorption, degradation kinetics of the precursor pharmaceuticals, identification of the arising transformation products (TPs) and evaluation of their time-course were investigated by liquid chromatography (LC) with quadrupole time-of-flight (QTOF) mass spectrometry (MS) detection. The three antimycotics displayed similar stabilities when exposed to 254 nm light; however, CTZ was significantly more stable than MCZ and KTZ when irradiated with the 365 nm lamp. TPs identified in silicone supports resulted from de-chlorination, cleavage, intra-molecular cyclization and hydroxylation reactions. Many of these species were also detected when exposing other solid matrices, such as sand and agricultural soil, previously spiked with target compounds, to UV light. The 50% estimated lethal concentration, calculated using the 48-h Daphnia magna test, for the two main TPs of CTZ and MCZ, at both wavelengths, were lower than those corresponding to the precursor drugs.

The influence of ionizing radiation on itraconazole in the solid state.

The aim of this study was to investigate the ionizing radiation effects, in the form of an electron beam, on itraconazole (ITR) in the solid phase. It was found that the ITR, under the influence of a standard 25 kGy dose of radiation used for the sterilization of drug substances, decomposed at 0.4%. Moreover, a gentle change of colour and a decrease in melting point does not exceed pharmacopoeial standards causing that ITR can be sterilized by radiation method. The use of high 400 kGy radiation doses resulted in a 6.5% decomposition of the ITR and eight radiodegradation products were found. However, with the exception of differential scanning calorimetry (DSC), the X-ray diffraction, Fourier transform infrared spectroscopy (FT-IR) and ultraviolet-visible (UV-vis) methods showed no changes in the form and the morphology of the crystals. The structures of all those compounds were investigated. It was confirmed that the ITR decomposition takes place by dehalogenation (one of Cl atom elimination), the oxidation in isobutyl residue (beside the triazole ring) and C-O bond rupture.

Antifungal efficiency assessment of the TiO2 coating on façade paints.

The work studies the photocatalytic activity and the antifungal efficiency of the TiO2/Zn-Al coatings placed on the target commercial façade paints. The photocatalytic active nanocomposite based on TiO2 and Zn-Al-layered double hydroxides (ZnAl-LDHs) was synthesized by a wet impregnation technique with 3 % w/w TiO2. The freshly prepared suspension was applied by spray technique on the surfaces of the white façade paints. The goal of the work was to develop a method that quickly quantifies the antifungal activity of the commercial façade paints with and without biocidal components covered with a photocatalytic coating. The essence of the proposed method is the monitoring of the fungal growth (artificial ageing conditions) and the quantification of its development (UV-A 0.13 mWcm(-2)) on the façade paint surfaces. A special fungus nutrient (potato dextrose agar (PDA)) was inoculated with the spores of the Aspergillus niger ATCC 6275, and the test samples (façade paints with and without photocatalytic coating) were placed on the inoculated nutrient in the petri dishes. The images of the fungal growth on the samples of the facade paints, during a period of 5 days, were imported into Matlab R2012a where they were converted to binary images (BW), based on the adequate threshold. The percentage of the surface coverage was calculated by applying the specifically written program code which determines the ratio of the black and white pixels. The black pixels correspond to the surface covered with hyphae and mycelia of the fungus.

ESR detection of ROS generated by TiO2 coated with fluoridated apatite.

Specific materials used in the manufacture of dentures may enhance the removal of micro-organisms. The ultraviolet A (UVA) irradiation of acrylic resin containing titanium dioxide (TiO(2)) generates reactive oxygen species (ROS) by photocatalysis that shows antibacterial effects. In this study, we tested the hypothesis that TiO(2) coated with fluoridated apatite (FAp-TiO(2)) can generate ROS via photo-catalysis by using electron spin resonance (ESR), and that acrylic resin containing FAp-TiO(2) can show antifungal properties by measuring the viability of Candida albicans. We demonstrated that hydroxyl radicals (HO(*)) were generated through excitation of TiO(2), TiO(2) coated with apatite (HAp-TiO(2)), and FAp-TiO(2). The HO(*) generation through excitation of FAp-TiO(2) was higher than that of TiO(2) and HAp-TiO(2). Regarding antifungal activity, cell viability on acrylic resin containing FAp-TiO(2) was lower than that of TiO(2) and HAp-TiO(2). FAp-TiO(2) showed superior photocatalytic effects, and these characteristics may lead to novel methods for the clinical application of denture-cleaning treatments.

Radiochemical stability of fluconazole in the solid state.

The effect of ionizing radiation in doses between 20 and 200 kGy on physicochemical properties of fluconazole (alpha-(2,4-diflurophenyl)-alpha-(1H-triazol-1-methyl)-1H-1,2,4-triazole-1-ethanol) in the solid state was examined. A number of qualitative and quantitative methods such as scanning electron microscopy (SEM), nuclear magnetic resonance (NMR), ultraviolet (UV) and infrared (IR) spectroscopy, thin layer chromatography (TLC) and high pressure liquid chromatography (HPLC) and organoleptic analysis were used to determine and analyse any changes resulting from irradiation. A change in colour from white to cream was observed at even smallest dose (20 kGy) and as the dose increased the colour deepened from salmon pink to orange at the highest dose of 200 kGy. The UV method showed an increase in absorbance at lambda(max) and an appearance of an additional band in the range 280-310 nm for irradiated samples. These changes were associated with the appearance of one to two decomposition products observed by TLC. Depending on the dose of radiation, the HPLC method detected between 2 and 3 radiolysis products and the decreasing fluconazole content from 0.48 to 7.12%. The remaining analytical methods (SEM, IR and NMR) did not provide any conclusive information in respect of radiological stability of fluconazole. The results indicate that fluconazole is a compound of low radiological stability and should not be sterilized using gamma, beta or E-beam radiation.

Synthesis and antifungal activity of (Z)-5-arylidenerhodanines.

An efficient microwave-assisted synthesis of new (Z)-5-arylidenerhodanines under solvent-free conditions is described and their in vitro antifungal activity was evaluated following the CLSI (formerly NCCLS) guidelines against a panel of both standardized and clinical opportunistic pathogenic fungi. An analysis of the structure-activity relationship (SAR) along with computational studies showed that the most active compounds (F- and CF(3)-substituted rhodanines) possess high logP values and low polarizability. Mechanism-based assays suggest that active compounds neither would bind to ergosterol nor would produce a damage to the fungal membrane.

Solvent free microwave synthesis and evaluation of antimicrobial activity of pyrimido[4,5-b]- and pyrazolo[3,4-b]quinolines.

A series of 2-oxopyrimido[4,5-b]-, 2-thio[4,5-b]-, 1-(p-tosyl)pyrazolo[3,4-b]- and 1-(2',4'-dinitrophenyl)pyrazolo[3,4-b]-quinolines have been synthesized in good to excellent yields by environmentally benign solvent free microwave-induced techniques involving the condensation of 2-chloro-3-formylquinolines with urea, thiourea, p-toluenesulfonylhydrazide and 2,4-dinitrophenylhydrazine, respectively, using PTSA as a catalyst. All the synthesized compounds were evaluated for their antibacterial and antifungal activities. Most of the compounds showed the best activity against Escherichia coli and Pseudomonas aeruginosa.

Microwave-assisted synthesis of N-alkylated benzotriazole derivatives: antimicrobial studies.

Synthesis and characterization of N-alkylated benzotriazole derivatives 2(a-g) bearing pharmaceutically important bioactive substituents and their antimicrobial studies in vitro are described. The syntheses of the compounds were achieved by N-alkylation of the benzotriazole with different bioactive alkyl halides in presence of powdered K2CO3 in DMF solution and by microwave irradiation method with good yield compared to conventional method. The crystal structure analysis shows that compound 4'-benzotriazol-1-yl-methyl-biphenyl-2-carbonitrile 2a crystallizes in the space group P1 with cell parameters a = 8.526 (3) A, b = 12.706 (3) A, c = 7.966 (2) A, alpha = 100.89 (2) degrees , beta = 101.63 (3) degrees , gamma = 102.20(2) degrees, Volume = 801.7(4) A degrees , Z = 2 and the final R factor is 0.0559 for 6130 reflections with 218 parameters and zero restraint. This structure exhibits intermolecular hydrogen bonding. Compounds 2e, 2a showed significant antimicrobial activity.

Light- and singlet oxygen-mediated antifungal activity of phenylphenalenone phytoalexins.

The light-induced singlet oxygen production and antifungal activity of phenylphenalenone phytoalexins isolated from infected banana plants (Musa acuminata) are reported. Upon absorption of light energy all studied phenylphenalenones sensitise the production of singlet oxygen in polar and non-polar media. Antifungal activity of these compounds towards Fusarium oxysporum is enhanced in the presence of light. These results, together with the correlation of IC50 values under illumination with the quantum yield of singlet oxygen production and the enhancing effect of D2O on the antifungal activity, suggest the intermediacy of singlet oxygen produced by electronic excitation of the phenylphenalenone phytoalexins.

Effects of plasma irradiation on the wettability and dissolution of compacts of griseofulvin.

In this study, the use of plasma irradiation was investigated as a possible technique for increasing the dissolution rate of the poorly soluble drug griseofulvin. Plasma is a partially ionised gas consisting of ions, electrons and neutral species. Oxygen plasma was used to treat griseofulvin compacts as this would lead to the formation of oxygen containing functional groups on the surface of the compact thus increasing the wettability. Compacts containing 300 mg of the drug were prepared using a stainless steel punch and die assembly and plasma treated. The effect of the length and power of the plasma treatment upon the dissolution rate of griseofulvin was investigated. Dissolution experiments of griseofulvin were carried out using the paddle method using 0.1 M HCl and 0.1 M HCl with 2% sodium dodecyl sulphate (SDS) as the dissolution media. The wettability was assessed by contact angle measurements using the sessile drop technique with the contact angle being measured every second for a period of ten seconds using pure water (to European Pharmacopoeia standards). Plasma treated and untreated samples were also analysed by scanning electron microscopy. Although plasma treatment was found to increase the wettability of griseofulvin it was not found to increase the dissolution rate as the treatment caused surface fusion of the material.

Synthesis and radiation stability of novel biologically active sulfur compounds derived from 1,2-bis(4-amino-5-mercapto-s-triazol-3-yl)ethane.

Some novel 1,2-bis(s-triazolo[3,4b][1,3,4]thiadiazino-3-yl)ethane (4-7); 1,2-bis(s-triazolo[3,4b][1,3,4]thiadiazol-3-yl)ethane (16a,b) and 1,2-bis(s-triazolo[3,4b][1,3,4]thiadiazepino-3-yl)ethane (17) were synthesized via reaction of 1,2-bis(4-amino-5-mercapto-s-triazol-3-yl)ethane (3) with different reagents. Identification of the new compounds was established by elemental analyses, IR, 1H NMR and mass spectral data. Compounds 12, 13, 16b and 17 were promising antifungal activity. The biologically active compounds 13, 16b and 17 were radioresistant retaining their structures unchanged up to 40 k Gy. Radiosterilization of these compounds in the dry state may prove to be applicable.

[The effect of solar ultraviolet on the system of microorganisms-higher plant antibiotics, a natural phenomenon and a new approach to enhancing the efficacy of antibiotics]. / Vozdeistvie ul'trafioleta solnechnogo izlucheniia na sistemu mikroorganizmy--antibiotiki vysshikh rastenii--prirodnoe iavlenie i novyi podkhod k povysheniiu éffektivnosti antibiotikov.

Under the effect of solar radiation some antibiotics of plant origin (phenylheptatriin, bakuchiol and others) showed antimicrobial phototoxicity differing by the spectrum and activity from the antibiotic action. The highest in vitro antimicrobial phototoxicity was observed with polyacetylene phenylheptatriin: the activation effect of solar radiation on it was due to UV-A and developed in gaseous phase or to a lesser extent in dispersed liquid phase. For comparison, 18 currently used antibiotics of various chemical structure were investigated and no phototoxicity under the effect of solar radiation with respect to the tested microbes was detected. In nature the phenomenon of antimicrobial phototoxicity of plant secondary metabolites due to the effect of solar radiation is probably of large scale. The study of the phenomenon is a new trend in biology (plant antibiotics and phytoncides, phytoimmunity, ecological and evolutionary microbiology, etc.) and a new approach to increase the efficacy of some antibiotics and to develop principally novel photochemotherapeutics for the treatment of infections in humans, animals and plants.