Thermal and non-thermal effects of capacitive-resistive electric transfer application on different structures of the knee: a cadaveric study.

Capacitive-resistive electric transfer therapy is used in physical rehabilitation and sports medicine to treat muscle, bone, ligament and tendon injuries. The purpose is to analyze the temperature change and transmission of electric current in superficial and deep knee tissues when applying different protocols of capacitive-resistive electric transfer therapy. Five fresh frozen cadavers (10 legs) were included in this study. Four interventions (high/low power) were performed for 5 min by a physiotherapist with experience. Dynamic movements were performed to the posterior region of the knee. Capsular, intra-articular and superficial temperature were recorded at 1-min intervals and 5 min after the treatment, using thermocouples placed with ultrasound guidance. The low-power protocols had only slight capsular and intra-capsular thermal effects, but electric current flow was observed. The high-power protocols achieved a greater increase in capsular and intra-articular temperature and a greater current flow than the low-power protocols. The information obtained in this in vitro study could serve as basic science data to hypothesize capsular and intra-articular knee recovery in living subjects. The current flow without increasing the temperature in inflammatory processes and increasing the temperature of the tissues in chronic processes with capacitive-resistive electric transfer therapy could be useful for real patients.

Thermal and non-thermal effects off capacitive-resistive electric transfer application on the Achilles tendon and musculotendinous junction of the gastrocnemius muscle: a cadaveric study.

BACKGROUND: Calf muscle strain and Achilles tendon injuries are common in many sports. For the treatment of muscular and tendinous injuries, one of the newer approaches in sports medicine is capacitive-resistive electric transfer therapy. Our objective was to analyze this in vitro, using invasive temperature measurements in cadaveric specimens. METHODS: A cross-sectional study designed with five fresh frozen cadavers (10 legs) were included in this study. Four interventions (capacitive and resistive modes; low- and high-power) was performed for 5 min each by a diathermy "T-Plus" device. Achilles tendon, musculotendinous junction and superficial temperatures were recorded at 1-min intervals and 5 min after treatment. RESULTS: With the low-power capacitive protocol, at 5 min, there was a 25.21% increase in superficial temperature, a 17.50% increase in Achilles tendon temperature and an 11.27% increase in musculotendinous junction temperature, with a current flow of 0.039 A ± 0.02. With the low-power resistive protocol, there was a 1.14% increase in superficial temperature, a 28.13% increase in Achilles tendon temperature and an 11.67% increase in musculotendinous junction temperature at 5 min, with a current flow of 0.063 A ± 0.02. With the high-power capacitive protocol there was an 88.52% increase in superficial temperature, a 53.35% increase in Achilles tendon temperature and a 39.30% increase in musculotendinous junction temperature at 5 min, with a current flow of 0.095 A ± 0.03. With the high-power resistive protocol, there was a 21.34% increase in superficial temperature, a 109.70% increase in Achilles tendon temperature and an 81.49% increase in musculotendinous junction temperature at 5 min, with a current flow of 0.120 A ± 0.03. CONCLUSION: The low-power protocols resulted in only a very slight thermal effect at the Achilles tendon and musculotendinous junction, but current flow was observed. The high-power protocols resulted in a greater temperature increase at the Achilles tendon and musculotendinous junction and a greater current flow than the low-power protocols. The high-power resistive protocol gave the greatest increase in Achilles tendon and musculotendinous junction temperature. Capacitive treatments (low- and high-power) achieved a greater increase in superficial temperature.

Bipolar cautery tonsillectomy using different energy doses: pain and bleeding.

OBJECTIVE: Tonsillectomies are the most frequently applied operations in the ENT practice. Even though different surgical tonsillectomy techniques have been used, bipolar cautery is the most frequently used one. Our aim was to compare postoperative bleeding rates, pain scores and recovery times in tonsillectomies performed by using bipolar cautery in Joules (1Watt·sec or Ws) calculated by multiplying Watts by the duration of cauterization. METHODS: Adenotonsillectomy and tonsillectomy patients, admitted to the Department of otorhinolaryngology of Izmir Ataturk Training and Research Hospital and Mardin State Hospital, between January 2007 and December 2012 constituted the study group prospectively. The patients divided into 4 groups due to the energy they exposed. RESULTS: Patients in Group 1 recovered most rapidly (mean recovery time, 13.9 ± 1.8 days). Statistically significant results were obtained between Groups 1 and 4 and also Groups 2 and 4 when recovery times of the patient groups were evaluated with Bonferroni correction test. CONCLUSION: As a result, for hemostatic control, electrocauterization should be used at lower doses and short-term as possible so as to decrease frequency of bleeding episodes, alleviate postoperative pain and accelerate wound healing.

Comparison of a saliva wetness tester and a moisture-checking device in patients with maxillary obturator prostheses.

OBJECTIVE: Examination of dry mouth in postoperative oral tumour patients should ideally be performed simply and quickly at the chair side. Moisture-checking devices and saliva wetness testers are available for such moisture measurement. Previous studies have reported that moisture-checking devices are useful to examine dry mouth in patients with maxillary obturator prostheses. However, because the measurement principles of saliva wetness testers differ from those of moisture-checking devices, diagnosis by the two devices may result in diagnostic disagreement. The purpose of the present study was to compare the usefulness of a saliva wetness tester with a moisture-checking device for patients with maxillary obturator prostheses. METHODS: Oral moisture was measured with a moisture-checking device and a saliva wetness tester in 30 subjects with maxillary obturator prostheses. These measurements were performed five times at the lingual mucosa, and mean values of each measurement were calculated. The reference value for moisture measurements with the moisture-checking device was 29%, and that with the saliva wetness tester was 3 mm. Subjects were classified as having dry mouth when their moisture measurements were less than the reference values. RESULTS: The diagnostic results of the saliva wetness tester were in agreement with those of the moisture-checking device. The respective moisture measurements showed a significant positive correlation (r=0.88, p<0.01). CONCLUSION: The results of the present study demonstrate that saliva wetness testers are as useful as moisture-checking devices to examine dry mouth in patients with maxillary obturator prostheses.

Comparison of five different defibrillators using recommended energy protocols.

Biphasic defibrillators represent a great step ahead in defibrillation. The manufacturers claim that biphasic defibrillators are able to compensate for differences in transthoracic impedance. That should mean that all patients should be defibrillated with approximately the same amount of current, regardless of their transthoracic impedance. We assessed one monophasic and four biphasic defibrillators. The defibrillators were discharged into resistive loads of 50, 90 and 130 Omega, simulating transthoracic impedance. For each waveform we used energy protocols recommended by the manufacturers and guidelines 2005. Waveforms were observed with on a digitising oscilloscope on a current sensing resistor. We compared the electrical properties of different waveforms and two defibrillators with the same type of waveform. The influence of different impedance on shape, duration and amplitude of current flow were also observed for each waveform. Measurements showed a significant difference in current flow at different impedance loads. At low impedance the mean current is well above expectations for all the defibrillators studied and at high impedance load we observed a big reduction of current amplitude. We can conclude that the compensating mechanisms of biphasic defibrillators are, from electrical point of view, negligible. From the laws of physics it is practically impossible to keep same level of current at given time with same energy at higher impedance. That is why we should reconsider the use of different energy equivalents between patients with different transthoracic impedance and not between different defibrillation impulses.

Solcoseryl, a tissue respiration stimulating agent, significantly enhances the effect of capacitively coupled electric field on the promotion of bone formation around dental implants.

In the present study we examined the combined effect of application of a capacitively coupled electric field (CCEF) and the tissue respiration stimulating agent, Solcoseryl, on the promotion of bone formation around dental implants histologically and mechanically. After a dental implant was inserted into each femur of Japanese white rabbits, Solcoseryl (2 ml/kg) was administered intravenously in the ear vein and a CCEF was applied for 4 h per day for 14 days. The degree of bone formation on microscopic observation, bone contact ratio, bone surface area ratio, and the level of removal torque of the implant in the Solcoseryl- and CCEF-treated group were significantly higher than the respective value in the control group, which had not been treated with Solcoseryl nor CCEF. Thus, the combination of CCEF stimulation and Solcoseryl effectively promoted the formation of new bone. It is suggested that the clinical use of a combination of CCEF stimulation and Solcoseryl for dental implants promotes osseointegration.