Statistical design and optimization of nano-transfersomes based chitosan gel for transdermal delivery of cefepime.

OBJECTIVES: This research aimed to overcome challenges posed by cefepime excessive elimination rate and poor patient compliance by developing transdermal delivery system using nano-transfersomes based chitosan gel. METHODS: Rotary evaporation-sonication method and the Box-Behnken model were used to prepare cefepime loaded nano-transfersomes (CPE-NTFs). The physiochemical characterization of CPE-NTFs were analyzed including DLS, deformability index, DSC and antimicrobial study. Optimized CPE-NTFs loaded into chitosan gel and appropriately characterized. In vitro release, ex vivo and in vivo studies were performed. RESULTS: The CPE-NTFs were physically stable with particle size 222.6 ± 1.8 nm, polydispersity index 0.163 ± 0.02, zeta potential -20.8 ± 0.1 mv, entrapment efficiency 81.4 ± 1.1% and deformability index 71 ± 0.2. DSC analysis confirmed successful drug loading and thermal stability. FTIR analysis showed no chemical interaction among the excipients of CPE-NTFs gel. The antibacterial activity demonstrated a remarkable reduction in the minimum inhibitory concentration of cefepime when incorporated into nano-transfersomes. CPE-NTFs based chitosan gel (CPE-NTFs gel) showed significant physicochemical properties. In vitro release studies exhibited sustained release behavior over 24 h, and ex vivo studies indicated enhanced permeation and retention compared to conventional cefepime gel. In vivo skin irritation studies confirmed CPE-NTFs gel was nonirritating and biocompatible for transdermal delivery. CONCLUSION: This research showed nano-transfersomes based chitosan gel is a promising approach for cefepime transdermal delivery and provides sustained release of cefepime.

Effect of the Association and Evaluation of the Induction to Adaptation of the (+)-α-pinene with Commercial Antimicrobials against Strains of Escherichia coli.

BACKGROUND: The increasing and inappropriate use of antibiotics has increased the number of multidrug-resistant microorganisms to these drugs, causing the emergence of infections that are difficult to control and manage by health professionals. As an alternative to combat these pathogens, some monoterpenes have harmful effects on the bacterial cell membrane, showing themselves as an alternative in combating microorganisms. Therefore, the positive enantiomer α -pinene becomes an alternative to fight bacteria, since it was able to inhibit the growth of the species Escherichia coli ATCC 25922, demonstrating the possibility of its use as an isolated antimicrobial or associated with other drugs. AIMS: The aim of this study is to evaluate the sensitivity profile of E. coli ATCC 25922 strain against clinical antimicrobials associated with (+) -α-pinene and how it behaves after successive exposures to subinhibitory concentrations of the phytochemicals. METHODS: The minimum inhibitory concentration (MIC) was determined using the microdilution method. The study of the modulating effect of (+) -α-pinene on the activity of antibiotics for clinical use in strains of E. coli and the analysis of the strain's adaptation to the monoterpene were tested using the adapted disk-diffusion method. RESULTS: The results demonstrate that the association of monoterpene with the antimicrobials ceftazidime, amoxicillin, cefepime, cefoxitin and amikacin is positive since it leads to the potentiation of the antibiotic effect of these compounds. It was observed that the monoterpene was able to induce crossresistance only for antimicrobials: cefuroxime, ceftazidime, cefepime and chloramphenicol. CONCLUSION: It is necessary to obtain more concrete data for the safe use of these combinations, paying attention to the existence of some type of existing toxicity reaction related to the herbal medicine and to understand the resistance mechanisms acquired by the microorganism.

Preparation of metal-organic framework based carbon materials and its application to adsorptive removal of cefepime from aqueous solution.

Metal-organic framework based carbon material UC-X was prepared by template method, and adopted to remove cephalosporins from aqueous solution. The effect of templates including cetyltrimethyl ammonium bromide and sodium laurate was discussed. The UC-0.1 with the pore size of 5.38 nm has the best adsorption. According to FTIR spectrum, with the gradual increase of sodium laurate, the functional groups like CO increased, which promoted the adsorption capacity of cefepime in UC-X materials from 42.52 to 84.23 mg⋅g-1. The optimal conditions for the adsorption of cefepime were determined by the response surface method: the adsorption temperature was 25.8 °C, the initial pH value was 6.11, and the ionic strength was 1.13 g·L-1. Under the best adsorption condition, the adsorption-desorption experiments showed that the adsorption capacity of UC-0.1 material decreased by less than 10 % after five times usage, which indicated that its recycling property was competitive. The adsorption process conformed to the mixed-order kinetic model, and the error of equilibrium adsorption capacity between model fitting and actual experiments is not more than 1 %. The overall results of adsorption isotherm model and thermodynamic analysis demonstrated that Redlich-Peterson isothermal model could describe the adsorption process better.

Meropenem, Cefepime, and Piperacillin Protein Binding in Patient Samples.

BACKGROUND: The mortality rate of patients with a drug-resistant bacterial infection is high, as are the associated treatment costs. To overcome these issues, optimization of the available therapeutic options is required. Beta-lactams are time-dependent antibiotics and their efficacy is determined by the amount of time the free concentration remains above the minimum inhibitory concentration. Therefore, the aim of this study was to assess the extent and variability of protein binding for meropenem, cefepime, and piperacillin. METHODS: Plasma samples for the analysis of meropenem, cefepime, and piperacillin were collected from patients admitted to a tertiary care hospital as part of the standard care. The bound and unbound drug fractions in the samples were separated by ultrafiltration. Validated liquid chromatography-tandem mass spectrometry assays were used to quantify the total and free plasma concentrations, and the protein binding was determined. RESULTS: Samples from 95 patients were analyzed. The median (range) age of patients was 56 years (17-87) and the median (range) body mass index was 25.7 kg/m (14.7-74.2). Approximately 59% of the patients were men. The median (range) unbound fraction (fu) was 62.5% (41.6-99.1) for meropenem, 61.4% (51.6-99.2) for cefepime, and 48.3% (39.4-71.3) for piperacillin. In the bivariate analysis, as the total meropenem concentration increased, the fu increased (r = 0.37, P = 0.045). A decrease in piperacillin fu was observed as the albumin concentration increased (r = -0.56, P = 0.005). CONCLUSIONS: The average fu values were lower than those reported in the literature. There was also a large variability in fu; hence, it should be considered when managing patients administered with these drugs through direct measurements of free drug concentrations.

Stability Studies of Antipyocyanic Beta-Lactam Antibiotics Used in Continuous Infusion.

In intensive care, beta-lactams can be reconstituted in 50 mL polypropylene syringes with NaCl 0.9 % and administered for 8 to 12 h at various concentrations with motor-operated syringe pumps. The feasibility and/or the stability of these antibiotic therapies are often poorly known by clinicians. The purpose of this study was to determine the stability of seven antipyocyanic beta-lactam antibiotics and cilastatin under real-life conditions. Stability indicating HPLC methods allowing quantification in pharmaceutical preparations and subsequent stability studies were performed. The stability studies showed that continuous infusion of piperacillin/tazobactam 80/10 mg/mL, of cefepime 20 and 40 mg/mL and of aztreonam 40 and 120 mg/mL can be used over 12 h. Moreover, continuous infusion of cefepime 120 mg/mL can be used over 10 h, whereas meropenem 10 and 20 mg/mL and ceftazidime 40 mg/mL remained stable only over 8 h, and meropenem 40 mg/mL was significantly degraded after 6 h. Finally, imipenem/cilastatin 5/5 mg/mL and piperacillin/tazobactam 320/40 mg/mL should not be used as continuous infusion. These data allow the establishment of protocols of administration of antipyocyanic beta-lactams by continuous infusion. Some of them are not appropriate to this mode of administration (imipenem/cilastatin, piperacillin/ tazobactam 320/40 mg/mL) or must be avoided if possible (ceftazidime 40 mg/mL).

The Reaction Mechanism of Metallo-ß-Lactamases Is Tuned by the Conformation of an Active-Site Mobile Loop.

Carbapenems are "last resort" ß-lactam antibiotics used to treat serious and life-threatening health care-associated infections caused by multidrug-resistant Gram-negative bacteria. Unfortunately, the worldwide spread of genes coding for carbapenemases among these bacteria is threatening these life-saving drugs. Metallo-ß-lactamases (MßLs) are the largest family of carbapenemases. These are Zn(II)-dependent hydrolases that are active against almost all ß-lactam antibiotics. Their catalytic mechanism and the features driving substrate specificity have been matter of intense debate. The active sites of MßLs are flanked by two loops, one of which, loop L3, was shown to adopt different conformations upon substrate or inhibitor binding, and thus are expected to play a role in substrate recognition. However, the sequence heterogeneity observed in this loop in different MßLs has limited the generalizations about its role. Here, we report the engineering of different loops within the scaffold of the clinically relevant carbapenemase NDM-1. We found that the loop sequence dictates its conformation in the unbound form of the enzyme, eliciting different degrees of active-site exposure. However, these structural changes have a minor impact on the substrate profile. Instead, we report that the loop conformation determines the protonation rate of key reaction intermediates accumulated during the hydrolysis of different ß-lactams in all MßLs. This study demonstrates the existence of a direct link between the conformation of this loop and the mechanistic features of the enzyme, bringing to light an unexplored function of active-site loops on MßLs.

Dielectrophoresis System for Testing Antimicrobial Susceptibility of Gram-Negative Bacteria to ß-Lactam Antibiotics.

Gram-negative bacteria (GNBs) are common pathogens causing severe sepsis. Rapid evaluation of drug susceptibility would guide effective antibiotic treatment and promote life-saving. A total of 78 clinical isolates of 13 Gram-negative species collected between April 2013 and November 2013 from two medical centers in Tainan were tested. Bacterial morphology changes in different concentrations of antibiotics were observed under the electric field of a quadruple electrode array using light microscopy. The minimal inhibitory concentrations (MICs) of four antimicrobial agents, namely, cefazolin, ceftazidime, cefepime, and doripenem, were determined by the dielectrophoretic antimicrobial susceptibility testing (dAST) and by the conventional broth dilution testing (BDT). The antibiotics at the concentration of 1× MIC induced obvious morphological changes in susceptible GNBs, including cell elongation, cell swelling, or lysis, at 90 min. In contrast, resistant strains remained unchanged. The MIC results measured by dAST were in good agreement with those of BDT (essential agreement 95.6%). The category agreement rate was 89.2%, and the very major errors rate for dAST was 2.9%. In conclusion, dAST could accurately determine drug susceptibility within 90 min. Comprehensive tests by dAST for more drugs against more GNB species are possible in the future.