Substrate binding interferes with active site conformational dynamics in endoglucanase Cel5A from Thermobifida fusca.

The role of protein dynamics in enzyme catalysis is one of the most active areas in current enzymological research. Here, using endoglucanase Cel5A from Thermobifida fusca (TfCel5A) as a model, we applied molecular dynamics simulations to explore the dynamic behavior of the enzyme upon substrate binding. The collective motions of the active site revealed that the mechanism of TfCel5A substrate binding can likely be described by the conformational-selection model; however, we observed that the conformations of active site residues changed differently along with substrate binding. Although most active site residues retained their native conformational ensemble, some (Tyr163 and Glu355) generated newly induced conformations, whereas others (Phe162 and Tyr189) exhibited shifts in the equilibration of their conformational distributions. These results showed that TfCel5A substrate binding relied on a hybrid mechanism involving induced fit and conformational selection. Interestingly, we found that TfCel5A active site could only partly rebalance its conformational dynamics upon substrate dissociation within the same simulation time, which implies that the conformational rebalance upon substrate dissociation is likely more difficult than the conformational selection upon substrate binding at least in the view of the time required. Our findings offer new insight into enzyme catalysis and potential applications for future protein engineering.

Tunable Enzymatic Activity and Enhanced Stability of Cellulase Immobilized in Biohybrid Nanogels.

This paper reports a facile approach for encapsulation of enzymes in nanogels. Our approach is based on the use of reactive copolymers able to get conjugated with enzyme and build 3D colloidal networks or biohybrid nanogels. In a systematic study, we address the following question: how the chemical structure of nanogel network influences the biocatalytic activity of entrapped enzyme? The developed method allows precise control of the enzyme activity and improvement of enzyme resistance against harsh store conditions, chaotropic agents, and organic solvents. The nanogels were constructed via direct chemical cross-linking of water-soluble reactive copolymers poly(N-vinylpyrrolidone-co-N-methacryloxysuccinimide) with proteins such as enhanced green fluorescent protein (EGFP) and cellulase in water-in-oil emulsion. The water-soluble reactive copolymers with controlled amount of reactive succinimide groups and narrow dispersity were synthesized via reversible addition-fragmentation chain transfer (RAFT) polymerization. Poly(ethylene glycol) bis(3-aminopropyl) and branched polyethylenimine were utilized as model cross-linkers to optimize synthesis of nanogels with different architectures in the preliminary experiments. Biofluorescent nanogels with different loading amount of EGFP and varying cross-linking densities were obtained. We demonstrate that the biocatalytic activity of cellulase-conjugated nanogels (CNG) can be elegantly tuned by control of their cross-linking degrees. Circular dichroism (CD) spectra demonstrated that the secondary structures of the immobilized cellulase were changed in the aspect of α-helix contents. The secondary structures of cellulase in highly cross-linked nanogels were strongly altered compared with loosely cross-linked nanogels. The fluorescence resonance energy transfer (FRET) based study further revealed that nanogels with lower cross-linking degree enable higher substrate transport rate, providing easier access to the active site of the enzyme. The biohybrid nanogels demonstrated significantly improved stability in preserving enzymatic activity compared with free cellulase. The functional biohybrid nanogels with tunable enzymatic activity and improved stability are promising candidates for applications in biocatalysis, biomass conversion, or energy utilization fields.

Improving the activity of Trichoderma reesei cel7B through stabilizing the transition state.

Trichoderma reesei (Tr.) cellulases, which convert cellulose to reducing sugars, are a promising catalyst used in the lignocellulosic biofuel production. Improving Tr. cellulases activity, though very difficult, is highly desired due to the recalcitrance of lignocellulose. Meanwhile, it is preferable to enhance the cellulase's promiscuity so that substrates other than cellulose can also be hydrolyzed. In this work, an attempt is made to improve the catalytic activity of a major endogluanase Tr. Cel7B against xylan which crosslinks with cellulose in lignocellulose. By using quantum mechanics/molecular mechanics (QM/MM) molecular dynamics (MD) simulations, the transition state of the xylo-oligosaccharide hydrolysis is identified. Then, mutations are introduced and their effect on the transition state stabilization is ranked based on the free energy calculations. Seven top ranked mutants are evaluated experimentally. Three mutants A208Q, A222D, and G230R show a higher activity than the wild-type Tr. Cel7B in the hydrolysis of xylan (by up to 47%) as well as filter paper (by up to 50%). The combination of the single mutants can further improve the enzyme activity. Our work demonstrates that the free energy method is effective in engineering the Tr. Cel7B activity against xylan and cellulose, and thus may also be useful for improving the activity of other Tr. cellulases. Biotechnol. Bioeng. 2016;113: 1171-1177. © 2015 Wiley Periodicals, Inc.

Substrate binding to a GH131 ß-glucanase catalytic domain from Podospora anserina.

ß-Glucanases have been utilized widely in industry to treat various carbohydrate-containing materials. Recently, the Podospora anserina ß-glucanase 131A (PaGluc131A) was identified and classified to a new glycoside hydrolases GH131 family. It shows exo-ß-1,3/exo-ß-1,6 and endo-ß-1,4 glucanase activities with a broad substrate specificity for laminarin, curdlan, pachyman, lichenan, pustulan, and cellulosic derivatives. Here we report the crystal structures of the PaGluc131A catalytic domain with or without ligand (cellotriose) at 1.8Å resolution. The cellotriose was clearly observed to occupy the +1 to +3 subsites in substrate binding cleft. The broadened substrate binding groove may explain the diverse substrate specificity. Based on our crystal structures, the GH131 family enzyme is likely to carry out the hydrolysis through an inverting catalytic mechanism, in which E99 and E139 are supposed to serve as the general base and general acid.

Visualizing cellulase activity.

Commercial exploitation of lignocellulose for biotechnological production of fuels and commodity chemicals requires efficient-usually enzymatic-saccharification of the highly recalcitrant insoluble substrate. A key characteristic of cellulose conversion is that the actual hydrolysis of the polysaccharide chains is intrinsically entangled with physical disruption of substrate morphology and structure. This "substrate deconstruction" by cellulase activity is a slow, yet markedly dynamic process that occurs at different length scales from and above the nanometer range. Little is currently known about the role of progressive substrate deconstruction on hydrolysis efficiency. Application of advanced visualization techniques to the characterization of enzymatic degradation of different celluloses has provided important new insights, at the requisite nano-scale resolution and down to the level of single enzyme molecules, into cellulase activity on the cellulose surface. Using true in situ imaging, dynamic features of enzyme action and substrate deconstruction were portrayed at different morphological levels of the cellulose, thus providing new suggestions and interpretations of rate-determining factors. Here, we review the milestones achieved through visualization, the methods which significantly promoted the field, compare suitable (model) substrates, and identify limiting factors, challenges and future tasks.

Effects of low intensity ultrasound on cellulase pretreatment.

This research was to explore the mechanism of ultrasonic impact on free cellulase activity and immobilize cellulase activities. The highest free cellulase activity was achieved when the sample was treated with low intensity ultrasound at 15 W, 24 kHz for 10 min, under which the enzyme activity was increased by 18.17% over the control. Fluorescence and CD spectra revealed that the ultrasonic treatment had increased the number of tryptophan on cellulase surface slightly, with the deformation of certain number of α-helix structure and increase of random coil content in cellulase protein. The highest immobilized cellulase activity was achieved when the sample was treated with low intensity ultrasound at 60 W, 24 kHz for 10 min, under which the enzyme activity was increased by 24.67% over the control. Scanning electron microscopy revealed that the ultrasonic treatment had increased the surface area of immobilized cellulase.

Molecular architecture and structural transitions of a Clostridium thermocellum mini-cellulosome.

The cellulosome is a highly elaborate cell-bound multienzyme complex that efficiently orchestrates the deconstruction of cellulose and hemicellulose, two of the nature's most abundant polymers. Understanding the intricacy of these nanomachines evolved by anaerobic microbes could sustain the development of an effective process for the conversion of lignocellulosic biomass to bio-ethanol. In Clostridium thermocellum, cellulosome assembly is mediated by high-affinity protein:protein interactions (>10(9) M(-1)) between dockerin modules found in the catalytic subunits and cohesin modules located in a non-catalytic protein scaffold termed CipA. Whereas the atomic structures of several cellulosomal components have been elucidated, the structural organization of the complete cellulosome remains elusive. Here, we reveal that a large fragment of the cellulosome presents a mostly compact conformation in solution, by solving the three-dimensional structure of a C. thermocellum mini-cellulosome comprising three consecutive cohesin modules, each bound to one Cel8A cellulase, at 35 Å resolution by cryo-electron microscopy. Interestingly, the three cellulosomal catalytic domains are found alternately projected outward from the CipA scaffold in opposite directions, in an arrangement that could expand the area of the substrate accessible to the catalytic domains. In addition, the cellulosome can transit from this compact conformation to a multitude of diverse and flexible structures, where the linkers between cohesin modules are extended and flexible. Thus, structural transitions controlled by changes in the degree of flexibility of linkers connecting consecutive cohesin modules could regulate the efficiency of substrate recognition and hydrolysis.

Introduction of glycine and proline residues onto protein surface increases the thermostability of endoglucanase CelA from Clostridium thermocellum.

A saturation mutagenesis library was constructed at the position 329 of the endoglucanase CelA from Clostridium thermocellum based on previous results (Yi and Wu, 2010), and one mutation, S329G, was identified to contribute to the enhanced thermostability. The result inspired a rational design approach focusing on the introduction of Gly or Pro residue onto the protein surface, which led to the identification of two additional beneficial mutations, H194G and S269P. Combination of these three mutations resulted in a mutant with a 10-fold increase in half-life of inactivation (60 min) at 86°C without compromising activity compared with the wild-type. Its reaction temperature for maximum activity increased from 75 to 85°C. The results provide valuable thermostability-related structural information on this thermophilic enzyme.

Arabidopsis thaliana Rubisco small subunit transit peptide increases the accumulation of Thermotoga maritima endoglucanase Cel5A in chloroplasts of transgenic tobacco plants.

Over the past decade various approaches have been used to increase the expression level of recombinant proteins in plants. One successful approach has been to target proteins to specific subcellular sites/compartments of plant cells, such as the chloroplast. In the study reported here, hyperthermostable endoglucanase Cel5A was targeted into the chloroplasts of tobacco plants via the N-terminal transit peptide of nuclear-encoded plastid proteins. The expression levels of Cel5A transgenic lines were then determined using three distinct transit peptides, namely, the light-harvesting chlorophyll a/b-binding protein (CAB), Rubisco small subunit (RS), and Rubisco activase (RA). RS:Cel5A transgenic lines produced highly stable active enzymes, and the protein accumulation of these transgenic lines was up to 5.2% of the total soluble protein in the crude leaf extract, remaining stable throughout the life cycle of the tobacco plant. Transmission election microscopy analysis showed that efficient targeting of Cel5A protein was under the control of the transit peptide.

Hydrolytic activity of free and immobilized cellulase.

Cellulase is an enzymatic complex which synergically promotes the degradation of cellulose to glucose. The adsorption behavior of cellulase from Trichoderma reesei onto Si wafers or amino-terminated surfaces was investigated by means of ellipsometry and atomic force microscopy (AFM) as a function of temperature. Upon increasing temperature from (24 +/- 1) to (60 +/- 1) degrees C, adsorption of cellulase became faster and more pronounced and the mean roughness of cellulase adsorbed layers increased. In the case of cellulase adsorbed onto Si wafers, Arrhenius's plot allowed us to estimate the adsorption energy as 24.2 kJ mol(-1). The hydrolytic activity of free cellulase and cellulase immobilized onto Si wafers was tested using cellulose dispersions as substrates. The incubation temperature ranged from (37 +/- 1) to (60 +/- 1) degrees C. The highest efficiency was observed at (60 +/- 1) degrees C. The amount of glucose produced by free cellulase was approximately 20% higher than that obtained from immobilized cellulase. However, immobilizing cellulase onto Si wafers proved to be advantageous because they could be reused six times while retaining their original activity level. Such an effect was attributed to surface hydration, which prevents enzyme denaturation. The hydrolytic activity of cellulase immobilized onto amino-terminated surfaces was slightly lower than that observed for cellulase adsorbed onto Si wafers, and reuse was not possible.

Exploitation of the S-layer self-assembly system for site directed immobilization of enzymes demonstrated for an extremophilic laminarinase from Pyrococcus furiosus.

A fusion protein based on the S-layer protein SbpA from Bacillus sphaericus CCM 2177 and the enzyme laminarinase (LamA) from Pyrococcus furiosus was designed and overexpressed in Escherichia coli. Due to the construction principle, the S-layer fusion protein fully retained the self-assembly capability of the S-layer moiety, while the catalytic domain of LamA remained exposed at the outer surface of the formed protein lattice. The enzyme activity of the S-layer fusion protein monolayer obtained upon recrystallization on silicon wafers, glass slides and different types of polymer membranes was determined colorimetrically and related to the activity of sole LamA that has been immobilized with conventional techniques. LamA aligned within the S-layer fusion protein lattice in a periodic and orientated fashion catalyzed twice the glucose release from the laminarin polysaccharide substrate in comparison to the randomly immobilized enzyme. In combination with the good shelf-life and the high resistance towards temperature and diverse chemicals, these novel composites are regarded a promising approach for site-directed enzyme immobilization.

Enhancing the reusability of endoglucanase-gold nanoparticle bioconjugates by tethering to polyurethane microspheres.

The synthesis of polyurethane microsphere-gold nanoparticle "core-shell" structures and their use in the immobilization of the enzyme endoglucanase are described. Assembly of gold nanoparticles on the surface of polymer microspheres occurs through interaction of the nitrogens in the polymer with the nanoparticles, thereby precluding the need for modifying the polymer microspheres to enable such nanoparticle binding. Endoglucanse could thereafter be bound to the gold nanoparticles decorating the polyurethane microspheres, leading to a highly stable biocatalyst with excellent reuse characteristics. The immobilized enzyme retains its biocatalytic activity and exhibits improved thermal stability relative to free enzyme in solution. The high surface area of the host gold nanoparticles renders the immobilized enzyme "quasi free", while at the same time retaining advantages of immobilization such as ease of reuse, enhanced temporal and thermal stability, etc.

The mechanism of cellulase action on cotton fibers: evidence from atomic force microscopy.

Two cellulases from Trichoderma reesei--an exoglucanase, CBH I, and an endoglucanase, EG II--alone and in combination were incubated with cotton fibers. The effects of the cellulases on the surfaces of the cotton fibers were examined by atomic force microscopy. At high magnification, the physical effects on the fibers caused by the two types of enzymes were considerably different. Treatment with CBH I resulted in the appearance of distinct pathways or tracks along the length of the macrofibril. Treatment with EG II appeared to cause peeling and smoothing of the fiber surface. In combination, their effect was observed to be greatest when both enzymes were present simultaneously. When fibers smoothed by treatment with EG II were treated subsequently with CBH I, further evidence of path way formation caused by the action of CBH I along the fibers was observed. Incubation with a cellulase from Thermotoga maritima that lacks a cellulose binding domain had no effect on the surface of cotton fibers. These images provide the first physical evidence of differences in the effect of cellulase components action on the surface of cotton fibers and provide evidence for the movement or tracking of CBH I along the fibers. The first AFM image of CBH I molecules are presented.

Cellulosomes-structure and ultrastructure.

The cellulosome is a macromolecular machine, whose components interact in a synergistic manner to catalyze the efficient degradation of cellulose. The cellulosome complex is composed of numerous kinds of cellulases and related enzyme subunits, which are assembled into the complex by virtue of a unique type of scaffolding subunit (scaffoldin). Each of the cellulosomal subunits consists of a multiple set of modules, two classes of which (dockerin domains on the enzymes and cohesin domains on scaffoldin) govern the incorporation of the enzymatic subunits into the cellulosome complex. Another scaffoldin module-the cellulose-binding domain-is responsible for binding to the substrate. Some cellulosomes appear to be tethered to the cell envelope via similarly intricate, multiple-domain anchoring proteins. The assemblage is organized into dynamic polycellulosomal organelles, which adorn the cell surface. The cellulosome dictates both the binding of the cell to the substrate and its extracellular decomposition to soluble sugars, which are then taken up and assimilated by normal cellular processes.

Structure of the N-terminal cellulose-binding domain of Cellulomonas fimi CenC determined by nuclear magnetic resonance spectroscopy.

Multidimensional heteronuclear nuclear magnetic resonance (NMR) spectroscopy was used to determine the tertiary structure of the 152 amino acid N-terminal cellulose-binding domain from Cellulomonas fimi 1,4-beta-glucanase CenC (CBDN1). CBDN1 was studied in the presence of saturating concentrations of cellotetraose, but due to spectral overlap, the oligosaccharide was not included in the structure calculations. A total of 1705 interproton nuclear Overhauser effect (NOE), 56 phi, 88 psi, 42 chi 1, 9 chi 2 dihedral angle, and 88 hydrogen-bond restraints were used to calculate 25 final structures. These structures have a rmsd from the average of 0.79 +/- 0.11 A for all backbone atoms excluding disordered termini and 0.44 +/- 0.05 A for residues with regular secondary structures. CBDN1 is composed of 10 beta-strands, folded into two antiparallel beta-sheets with the topology of a jelly-roll beta-sandwich. The strands forming the face of the protein previously determined by chemical shift perturbations to be responsible for cellooligosaccharide binding [Johnson, P. E., Tomme, P., Joshi, M. D., & McIntosh, L. P. (1996) Biochemistry 35, 13895-13906] are shorter than those forming the opposite side of the protein. This results in a 5-stranded binding cleft, containing a central strip of hydrophobic residues that is flanked on both sides by polar hydrogen-bonding groups. The presence of this cleft provides a structural explanation for the unique selectivity of CBDN1 for amorphous cellulose and other soluble oligosaccharides and the lack of binding to crystalline cellulose. The tertiary structure of CBDN1 is strikingly similar to that of the bacterial 1,3-1,4-beta-glucanases, as well as other sugar-binding proteins with jelly-roll folds.

Ultrastructural diversity of the cellulase complexes of Clostridium papyrosolvens C7.

Transmission electron microscopy was used to investigate the ultrastructural features of diverse cellulase and cellulase-xylanase multiprotein complexes that are components of the cellulase-xylanase system of Clostridium papyrosolvens C7. The multiprotein complexes were separated by anion-exchange chromatography into seven biochemically distinguishable fractions (F1 to F7). Most individual F fractions contained, in relatively large numbers, an ultrastructurally recognizable type of particle that occurred only in smaller numbers, or not at all, in the other F fractions. It is suggested that these ultrastructurally distinct particles represent the biochemically distinct multiprotein complexes that constitute the cellulase-xylanase system of C. papyrosolvens C7. Some of the particles consisted of tightly packed globular components that appeared to be arranged in the shape of a ring with conical structures pointing out along its axis. Other particles had triangular, polyhedral, or star shapes. The major protein fraction (F4) almost exclusively contained particles consisting of loosely aggregated components, many of which appeared to be arranged along filamentous structures. The ultrastructural observations reported here support our previous conclusion that the cellulase-xylanase system of C. papyrosolvens C7 comprises at least seven different high-molecular-weight multiprotein complexes. Furthermore, results of this and earlier studies indicate that the interactions between C. papyrosolvens C7 and cellulose are different from those that have been described for Clostridium thermocellum.

A common protein fold and similar active site in two distinct families of beta-glycanases.

The structure of Clostridium thermocellum endoglucanase CelC, a member of the largest cellulase family (family A), has been determined at 2.15 A resolution. The protein folds into an (alpha/beta)8 barrel, with a deep active-site cleft generated by the insertion of a helical subdomain. The structure of the catalytic core of xylanase XynZ, which belongs to xylanase family F, has been determined at 1.4 A resolution. In spite of significant differences in substrate specificity and structure (including the absence of the helical subdomain), the general polypeptide folding pattern, architecture of the active site and catalytic mechanism of XynZ and CelC are similar, suggesting a common evolutionary origin.

Structural analysis by circular dichroism of some enzymes involved in plant cell wall degradation.

Three enzymes which degrade different polysaccharide components of plant cell walls have been characterized by circular dichroism (CD). A bacterial endoglucanase, which in the native state forms part of a multiprotein cellulase complex, showed a tendency to form aggregates as measured by CD. Depending on its degree of aggregation, this enzyme displayed between 50% and 100% helical structure, whereas a bacterial xylanase and a fungal polygalacturonase exhibited more beta-sheet structure. The polygalacturonase was apparently devoid of helical structure.