Homology and heterogeneity of soil trace elements of coal power production bases in arid and semi-arid areas of Northwest China.

Coal power activities could cause regional fluctuations of trace elements, but the distribution information of these trace elements in arid and semi-arid areas is insufficient. In this study, the soil trace elements (As, B, Be, Cd, Co, Cr, Cu, Fe, Ga, Ge, Mn, Mo, Ni, Pb, Sb, Sn, Sr, Ti, Tl, and Zn) of Ningdong Coal Power Production Base in China were monitored. Results showed that the concentrations of B, Tl, Mn, Pb, Cr, K, Cu, and Co exceeded background values. The maximum risk index reached 265.66, while the trace elements posed a cancer risk to children. Combining correlation analyses (CA), principal component analysis (PCA), and positive matrix factorization (PMF) techniques, it indicated that trace elements were mainly coming from coal combustion (34.15%), livestock farming (17.44%), traffic emissions (12.42%), and natural factors (35.99%). This study reveals the sources and potential ecological risks of soil trace elements in the Ningdong Coal and Power Production Base. It provides a scientific basis for developing targeted environmental management measures and reducing human health risks.

Prediction analysis of carbon emission in China's electricity industry based on the dual carbon background.

The electric power sector is the primary contributor to carbon emissions in China. Considering the context of dual carbon goals, this paper examines carbon emissions within China's electricity sector. The research utilizes the LMDI approach for methodological rigor. The results show that the cumulative contribution of economies scale, power consumption factors and energy structure are 114.91%, 85.17% and 0.94%, which contribute to the increase of carbon emissions, the cumulative contribution of power generation efficiency and ratio of power dissipation to generation factor are -19.15% and -0.01%, which promotes the carbon reduction. The decomposition analysis highlights the significant influence of economic scale on carbon emissions in the electricity industry, among the seven factors investigated. Meanwhile, STIRPAT model, Logistic model and GM(1,1) model are used to predict carbon emissions, the average relative error between actual carbon emissions and the predicted values are 0.23%, 8.72% and 7.05%, which indicates that STIRPAT model is more suitable for medium- to long-term predictions. Based on these findings, the paper proposes practical suggestions to reduce carbon emissions and achieve the dual carbon goals of the power industry.

Estimated greenhouse gas emissions in the Mbalmayo thermal power plant between 2016-2020 using the genetic-Gaussian algorithm coupling.

The greenhouse gas (GHG) emissions inventories in our context result from the production of electricity from fuel oil at the Mbalmayo thermal power plant between 2016 and 2020. Our study area is located in the Central Cameroon region. The empirical method of the second level of industrialisation was applied to estimate GHG emissions and the application of the genetic algorithm-Gaussian (GA-Gaussian) coupling method was used to optimise the estimation of GHG emissions. Our work is of an experimental nature and aims to estimate the quantities of GHG produced by the Mbalmayo thermal power plant during its operation. The search for the best objective function using genetic algorithms is designed to bring us closer to the best concentration, and the Gaussian model is used to estimate the concentration level. The results obtained show that the average monthly emissions in kilograms (kg) of GHGs from the Mbalmayo thermal power plant are: 526 kg for carbon dioxide (CO2), 971.41 kg for methane (CH4) and 309.41 kg for nitrous oxide (N2O), for an average monthly production of 6058.12 kWh of energy. Evaluation of the stack height shows that increasing the stack height helps to reduce local GHG concentrations. According to the Cameroonian standards published in 2021, the limit concentrations of GHGs remain below 30 mg/m3 for CO2 and 200 µg/m3 for N2O, while for CH4 we reach the limit value of 60 µg/m3. These results will enable the authorities to take appropriate measures to reduce GHG concentrations.

Research of biomimetic corrugation on the blade flutter suppression in large-scale wind turbine systems.

Aiming at the blade flutter of large horizontal-axis wind turbines, a method by utilizing biomimetic corrugation to suppress blade flutter is first proposed. By extracting the dragonfly wing corrugation, the biomimetic corrugation airfoil is constructed, finding that mapping corrugation to the airfoil pressure side has better aerodynamic performance. The influence of corrugation type, amplitudeλ, and intensity on airfoil flutter is analyzed using orthogonal experiment, which determines that theλhas the greatest influence on airfoil flutter. Based on the fluctuation range of the moment coefficient ΔCm, the optimal airfoil flutter suppression effect is obtained when the type is III,λ= 0.6, and intensity is denser (n= 13). The effective corrugation layout area in the chord direction is determined to be the leading edge, and the ΔCmof corrugation airfoil is reduced by 7.405%, compared to the original airfoil. The application of this corrugation to NREL 15 MW wind turbine 3D blades is studied, and the influence of corrugation layout length in the blade span direction on the suppressive effect is analyzed by fluid-structure interaction. It is found that when the layout length is 0.85 R, the safety marginSfreaches a maximum value of 0.3431 Hz, which is increased 2.940%. The results show that the biomimetic corrugated structure proposed in this paper can not only improve the aerodynamic performance by changing the local flow field on the surface of the blade, but also increase the structural stiffness of the blade itself, and achieve the effect of flutter suppression.

Environmental reporting in Italian thermal power plants: insights from a comprehensive analysis of EMAS environmental statements.

The global energy sector heavily relies on fossil fuels, significantly contributing to climate change. The ambitious European emissions' reduction targets require sustainable processes and alternatives. This study presents a comprehensive analysis of 73 Italian thermal power plants registered to the European Eco-Management and Audit Scheme (EMAS) aimed at assessing EMAS effectiveness in addressing and quantifying the environmental impacts of this relevant industrial sector. The analysis was based on EMAS environmental statements, publicly disclosing verified and certified data, with the secondary objective of evaluating if EMAS could be an efficient tool to improve the plants' environmental performances. An inventory of technical and environmental aspects, adopted indicators, and allocated budgets was based on 2023 data. A strong correlation was found between the significance of the environmental aspects and the number of adopted indicators. Gaps were observed in describing aspects like "biodiversity" and "local issues". Improvement objectives and budget allocation showed discrepancies and lacked correlation with the significance of the related environmental aspects. "Energy production" accounted for 68% of the total allocated budget; "environmental risks", "emissions to air", "electricity consumption", and "local issues" were also key focus areas. Insufficient information on emission control technologies and progress tracking of improvement objectives was detected. This study highlights the need for thermal power installations to improve the selection of appropriate indicators and to better relate allocated budget to improvement objectives when implementing EMAS. Such measures would facilitate the quantification of the effective environmental impacts of the energy production sector, supporting future research on this topic, allowing stakeholders a better comparison among plants, and driving industry-wide improvements.

Optimization of offshore wind farm inspection paths based on K-means-GA.

As global demand for offshore wind energy continues to rise, the imperative to enhance the profitability of wind power projects and reduce their operational costs becomes increasingly urgent. This study proposes an innovative approach to optimize the inspection routes of offshore wind farms, which integrates the K-means clustering algorithm and genetic algorithm (GA). In this paper, the inspection route planning problem is formulated as a multiple traveling salesman problem (mTSP), and the advantages of the K-means clustering algorithm in distance similarity are utilized to effectively group the positions of wind turbines, thereby optimizing the inspection schedule for vessels. Subsequently, by harnessing the powerful optimization capability and robustness of genetic algorithms, further refinement is conducted to search for the optimal inspection routes, aiming to achieve cost reduction objectives. The results of simulation experiments demonstrate the effectiveness of this integrated approach. Compared to traditional genetic algorithms, the inspection route length has been significantly reduced, from 93 kilometers to 79.36 kilometers. Simultaneously, operational costs have also experienced a notable decrease, dropping from 141,500 Chinese Yuan to 125,600 Chinese Yuan.

Biomass Ppower generation: A pathway to carbon neutrality.

In light of the pressing need to reduce carbon emissions, the biomass power generation industry has gained significant attention and has increasingly become a crucial focus in China. However, there are still considerable gaps in the historical background, status, and prospects of biomass power generation. Herein, the historical and current status of biomass power generation in China are systematically reviewed, with a particular emphasis on supportive policies, environmental impacts, and future projections. By 2022, the newly installed capacity for biomass power generation reached 3.34 MW with a total installed capacity of 41 MW. The power produced from biomass power generation is 182.4 billion kWh in China. The total installed capacity and generated power in 2022 were 1652 and 1139 folds higher than in 2006 when the first biomass generation plant was established. However, disparities in the distribution of biomass resources and power generation were observed. Key drivers of the industry development include tax, finance, and subsidy policies. Under the implementation of the 14th Five-Year Plan for renewable energy development and the goal of carbon neutrality, biomass power generation may achieve great success through more targeted policy support and advanced technologies that reduce air pollutant emissions. If combined with Bioenergy with Carbon Capture and Storage (BECCS) technology, biomass power generation will make its contribution to carbon neutrality in China.

A GIS-based catastrophe approach for optimal site selection for installation of solar power plants, East Azerbaijan province case study, Iran.

Due to depletion of fossil fuels and environmental issues, renewable energy consumption is increasingly growing. Solar energy as the most abundant renewable energy source available is becoming more popular around the world. In the current study, the optimal sites for solar photovoltaic power plants in East Azerbaijan province, Northwest Iran, were investigated. A total of 17 variables were categorized into four groups: climatic, geomorphological, environmental, and access-economic. In order to integrate the variables, a model based on catastrophe theory in the context of GIS was applied. The relative importance and weight of the criteria are computed based on the internal mechanism of the catastrophic system, thus greatly reducing subjectivism and uncertainties of the decision-making process. Five optimal sites located in the western part of the province within the counties of Malekan, Bonab, Ajabshir, Shabestar, and Tabriz were identified as suitable sites for the construction of solar photovoltaic power plants, where there are ideal conditions in terms of many environmental-human variables such as high potential of solar energy, high sunshine hours, low relative humidity, suitable slope, poor vegetation, distance to protected areas, proximity to the population centers, excellent access to the roads and to the main power lines.

Air Quality and Health Implications of Coal Power Retirements Attributed to Industrial Electricity Savings in China.

The coal-dominated electricity system, alongside increasing industrial electricity demand, places China into a dilemma between industrialization and environmental impacts. A practical solution is to exploit air quality and health cobenefits of industrial energy efficiency measures, which has not yet been integrated into China's energy transition strategy. This research examines the pivotal role of industrial electricity savings in accelerating coal plant retirements and assesses the nexus of energy-pollution-health by modeling nationwide coal-fired plants at individual unit level. It shows that minimizing electricity needs by implementing more efficient technologies leads to the phaseout of 1279 hyper-polluting units (subcritical, <300 MW) by 2040, advancing the retirement of these units by an average of 7 years (3-16 years). The retirements at different locations yield varying levels of air quality improvements (9-17%), across six power grids. Reduced exposure to PM2.5 could avoid 123,100 pollution-related cumulative deaths over the next 20 years from 2020, of which ∼75% occur in the Central, East, and North grids, particularly coal-intensive and populous provinces (e.g., Shandong and Jiangsu). These findings provide key indicators to support geographically specific policymaking and lay out a rationale for decision-makers to incorporate multiple benefits into early coal phaseout strategies to avoid lock-in risk.

Study of the differences in collection scope of raw materials of biomass CHP plants caused by regional factors.

Combined heat and power (CHP) plants fueled by biomass can collect and utilize waste straw resources in a productive way. This paper considers the impact of regional factors on biomass energy potential and the energy needs of the population, so as to study the differences in construction of biomass CHP plants and the collection scope of raw materials, and proposes evaluating suitability for biomass energy development based on scope of resource collection. Taking five counties in China as its study areas, this paper assesses biomass energy potential. A topology system of biomass CHP plants has been reasonably established in different counties through ArcGIS, the required installed capacity has been calculated according to the number of persons served by such plants. Finally, the collection length and corresponding value range of raw materials of CHP plants along roads has been obtained based on biomass energy potential and energy demand. The result shows that the differences in area, straw yield and biomass fuelization rate depending on regions have a great impact on biomass energy potential, while the residue-to-product ratio of straw and biomass calorific value have less of an impact. When the biomass energy per capita of a region reaches 9.75GJ/person, it is suitable for biomass energy development. The installed capacity in the biomass CHP plant system of each study area is mostly within the scope of 3-59 MW, and the collection length of corresponding biomass resources of such plants along roads is mostly within the scope of 5.09-25.23 km.

Study on the habitat evolution after dam removal in a habitat-alternative tributary of large hydropower station.

The establishment of large hydropower stations in the main stream poses a threat to fish habitats. Selecting suitable tributaries as alternative habitats is a practical measure for ecological environment protection during large hydropower station's construction. The small dams constructed on certain tributaries need to be removed in order to restore river connectivity. The removal of dams will activate hydro-sedimentary dynamics and change the original habitat in terms of topography and hydrodynamics. To explore the evolution of fish habitats following the removal of small dams, a dam-removed reach of a habitat-alternative tributary was selected as the research object, and the model of water-sediment transport and riverbed evolution in strongly disturbed dam-removed reaches and the model of fish habitat suitability evaluation were established. The key parameters calibration and model verification were completed by field monitoring results. The simulation results showed dramatic evolution in the reservoir riverbed in the initial stage after dam removal and during the high discharge period. One year after dam removal, there was a noticeable 4.0 m incision in front of the dam, along with a decrease in channel slope at the dam site from about 4.8% to approximately 1.5%. Downstream of the dam, alterations to the riverbed were mainly concentrated near the dam, and sedimentary bodies with a height of around 2.0 m have formed on the left bank following the high discharge period. The fish habitat in most areas of the dam-removed reach was suitable, except for the downstream high-velocity area. To compare the evolution process of fish habitat under two dam removal periods in wet and dry seasons, two dam removal schemes were implemented in March and June. The results showed that the riverbed evolved more gradually in the March scheme, creating a larger and continuous suitable habitat for fish. Therefore, the March scheme was recommended. By revealing the evolutionary pattern of fish habitat after dam removal, this research provides a reliable model for assessing and restoring habitats in dam-removed reaches, and enjoys significant implications for protecting river ecology in hydropower development reaches.

Incineration-source fingerprints and emission spectrums of dioxins with diagnostic application.

Despite increasing waste-to-energy (WtE) capacities, there remain deficiencies in comprehension of 136 kinds of tetra- through octa-chlorinated dibenzo-p-dioxin and dibenzofurans (136 PCDD/Fs) originating from incineration sources. Samples from twenty typical WtE plants, encompassing coal-fired power plants (CPP), grate incinerators (GI), fluidized bed incinerators (FBI), and rotary kilns (RK), yielded extensive PCDD/F datasets. Research was conducted on fingerprint mapping, formation pathways, emission profiles, and diagnostic analysis of PCDD/Fs in WtE plants. Fingerprints revealed a prevalence of TCDF, followed by PeCDF, while CPP and RK respectively generated more PCDD and HxCDD. De novo synthesis was the predominant formation pathway except one plant, where CP-route dominated. DD/DF chlorination also facilitated PCDD/F formation, showing general trends of FBI > GI > CPP > RK. The PCDD/F emission intensities emitted in air pollution control system inlet (APCSI) and outlet (APCSO) followed the statistical sequence of RK > FBI > GI > CPP, with the average I-TEQ concentrations in APCSO reaching 0.18, 0.08, 0.11, and 0.04 ng I-TEQ·Nm-3. Emission spectrum were accordingly formed. Four clusters were segmented for diagnosis analysis, where PCDD/Fs in GI and FBI were similar, grouped as a single cluster. PCDD/Fs in CPP and RK demonstrated distinctive features in TCDD, HxCDD, and HxCDF. The WtE plants exceeding the limit value tended to generate and retain fewer TCDD and TCDF yet had higher fractions of HxCDD and HxCDF. The failure of APCS coupled with the intrinsic source strength of PCDD/Fs directly led to exceedance, highlighting safe operational practices. This study motivated source tracing and precise evaluation of 136 PCDD/Fs based on the revealed fingerprint profiles for WtE processes.

Ecological risk assessment of heavy metals in desulfurized seawater discharged from a coal-fired power plant in Qingdao.

Despite the prevalence of discharge of large volumes of heavy-metal-bearing seawater from coal-fired power plants into adjacent seas, studies on the associated ecological risks remain limited. This study continuously monitored concentrations of seven heavy metals (i.e. As, Cd, Cr, Cu, Hg, Pb, and Zn) in surface seawater near the outfall of a coal-fired power plant in Qingdao, China over three years. The results showed average concentrations of As, Cd, Cr, Cu, Hg, Pb, and Zn of 2.63, 0.33, 2.97, 4.63, 0.008, 0.85, and 25.00 µg/L, respectively. Given the lack of data on metal toxicity to local species, this study investigated species composition and biomass near discharge outfalls and constructed species sensitivity distribution (SSD) curves with biological flora characteristics. Hazardous concentrations for 5% of species (HC5) for As, Cd, Cr, Cu, Hg, Pb, and Zn derived from SSDs constructed from chronic toxicity data for native species were 3.23, 2.22, 0.06, 2.83, 0.66, 4.70, and 11.07 µg/L, respectively. This study further assessed ecological risk of heavy metals by applying the Hazard Quotient (HQ) and Joint Probability Curve (JPC) based on long-term heavy metal exposure data and chronic toxicity data for local species. The results revealed acceptable levels of ecological risk for As, Cd, Hg, and Pb, but unacceptable levels for Cr, Cu, and Zn. The order of studied heavy metals in terms of ecological risk was Cr > Cu ≈ Zn > As > Cd ≈ Pb > Hg. The results of this study can guide the assessment of ecological risk at heavy metal contaminated sites characterized by relatively low heavy metal concentrations and high discharge volumes, such as receiving waters of coal-fired power plant effluents.

Is renewable energy development endangering power supply reliability?

The development of renewable energy is indispensable to promoting the low-carbon transition of power systems. Nevertheless, it also brings uncertainty to the reliability of power systems. Herein, the panel model and panel threshold model are established based on the provincial data in China from 2012 to 2020. The results reveal that the negative effect of renewable energy development (RED) on power supply reliability (PSR) is gradually lessening. If the development of renewable energy is a rational way, power supply reliability can be improved. Additionally, energy-exporting regions bear more risks of RED than energy-importing regions. If the coal prices are stable and natural disasters are manageable, the RED can enhance the PSR. However, if they are not stable or controllable, a high proportion of renewable energy in the power system could cause even more severe problems with PSR. Based on these critical results, some suggestions are made to promote the formation of a new power system.

Virtual Water Embodied in Interregional Energy Trade in China: A City-Level Analysis.

Large volumes of water are used in energy production for both primary (e.g., fuel extraction) and secondary energy (e.g., electricity). In countries such as China, with a large internal trade in fuels and long-distance transmission grids, this can result in considerable water inequalities. Previous research focused on the water impacts of energy production at the national and provincial levels, which is too coarse to identify the spatial differences and make specific case studies. Here, we take the next step toward a spatially explicit economically integrated water-use for energy assessment by combining a bottom-up assessment approach with a city-level multiregional input-output model. Specifically, we examine the water consumption of energy production in China, distinguishing between water for primary and secondary energy at the level of coal mines, oil and gas fields, and power plants for the first time. Of the total energy-related freshwater consumption of 4.9 Gm3 in 2017, primary energy accounted for 19% (940 Mm3) and secondary energy accounted for 81% (3955 Mm3). Coal was the largest water consumer for both primary and secondary energy (540 and 3880 Mm3, respectively), with both oil (361, and 0.5 Mm3, respectively) and gas (7 and 69 Mm3, respectively) also consuming large amounts. Intercity virtual water, that is, water embodied in energy trade across cities, reached 54% (2.6 Gm3) of energy-related freshwater consumption. Across China, 32% of cities see a bilateral trade in secondary- and primary-energy-related virtual water (e.g., Daqing city exports virtual water embodied in primary fuel to other cities that is then used to produce electricity in those cities, part of which is used back in Daqing via transmission). For these 32% of cities, 73% export more virtual water than import and 27% import more virtual water than export. This study reveals significant differences in city-level virtual water patterns (e.g., scale and direction) between primary and secondary energy to provide information for cities about their virtual water inflow and outflow and the potential collaboration partners for water management.

Analysis of decarbonization measures for the Indian Cement Sector.

Cement is one of the widely used materials in construction, and its production is both energy- and emission-intensive, contributing significantly to industrial emissions. This study investigates multiple methods for reducing emissions in the Indian cement sector based on the mass and energy balances of a representative cement plant. A novel methodology for calculating the overall emissions reduction per tonne of cement with multiple emission reduction measures and their interdependencies is proposed. The effect of captive power plants in the cement industry on emissions reduction is also considered. The results are depicted using an emission abatement curve, which gives the CO2 abatement cost against cumulative emission reduction per tonne of cement, and a cost premium curve, which shows the cumulative abatement cost against percentage abatement. The analysis shows that up to 30% emissions reduction is possible using existing emission reduction measures in all the cases considered with no additional cost, and near-zero emission reduction is only possible with the adoption of emerging technologies such as carbon capture and storage. The proposed methodology is the first to explore the impact of multiple measures for emission reduction on a given cement plant, allowing for a realistic estimate of emission reduction from the measures implemented.

Subsidizing Grid-Based Electrolytic Hydrogen Will Increase Greenhouse Gas Emissions in Coal Dominated Power Systems.

Clean hydrogen has the potential to serve as an energy carrier and feedstock in decarbonizing energy systems, especially in "hard-to-abate" sectors. Although many countries have implemented policies to promote electrolytic hydrogen development, the impact of these measures on costs of production and greenhouse gas emissions remains unclear. Our study conducts an integrated analysis of provincial levelized costs and life cycle greenhouse gas emissions for all hydrogen production types in China. We find that subsidies are critical to accelerate low carbon electrolytic hydrogen development. Subsidies on renewable-based hydrogen provide cost-effective carbon dioxide equivalent (CO2e) emission reductions. However, subsidies on grid-based hydrogen increase CO2e emissions even compared with coal-based hydrogen because grid electricity in China still relies heavily on coal power and likely will beyond 2030. In fact, CO2e emissions from grid-based hydrogen may increase further if China continues to approve new coal power plants. The levelized costs of renewable energy-based electrolytic hydrogen vary among provinces. Transporting renewable-based hydrogen through pipelines from low- to high-cost production regions reduces the national average levelized cost of renewables-based hydrogen but may increase the risk of hydrogen leakage and the resulting indirect warming effects. Our findings emphasize that policy and economic support for nonfossil electrolytic hydrogen is critical to avoid an increase in CO2e emissions as hydrogen use rises during a clean energy transition.

The effect of multiple factors on changes in organic-inorganic fractions of condensable particulate matter during coal combustion.

Condensable particulate matter (CPM) from coal combustion is the focus of current pollutant emission studies, and CPM can be divided into inorganic and organic fractions according to the component characteristics. At present, the effects of different factors in the combustion process on the organic and inorganic components of CPM have not been discussed systematically. Here, we conducted combustion experiments collected the generated CPM on a well-controlled drip tube furnace, and investigated the effects of different factors on the generation of organic and inorganic components of CPM by varying the furnace wall insulation temperature, the ratio of gas supply components and the water vapor content in the flue gas. The results showed that the increase in combustion temperature (1300-1500 °C) and oxygen concentration (15-25%) reduced the total CPM generation by 9.8% and 19.98%, respectively, and the intervention of water vapor increased the ability of the whole CPM sampling device to capture ultrafine condensable particles. The generation of CPM organic components decreased with the enhancement of combustion temperature and oxygen content on combustion characteristics, and alkanes shifted to low carbon content. The amount of CPM inorganic components increased with the increase of water vapor content in the flue gas, and this change was dominated by SO42-. The above results provide a feasible idea for the next step of the precise reduction of CPM components.

Migration and distribution characteristics of typical organic pollutants in condensable particulate matter of coal-fired flue gas and by-products of wet flue gas desulfurization system.

The wet flue gas desulfurization (WFGD) system of coal-fired power plants shows a good removal effect on condensable particulate matter (CPM), reducing the dust removal pressure for the downstream flue gas purification devices. In this work, the removal effect of a WFGD system on CPM and its organic pollutants from a coal-fired power plant was studied. By analyzing the organic components of the by-products emitted from the desulfurization tower, the migration characteristics of organic pollutants in gas, liquid, and solid phases, as well as the impact of desulfurization towers on organic pollutants in CPM, were discussed. Results show that more CPM in the flue gas was generated by coal-fired units at ultra-low load, and the WFGD system had a removal efficiency nearly 8% higher than that at full load. The WFGD system had significant removal effect on two typical esters, especially phthalate esters (PAEs), with the highest removal efficiency of 49.56%. In addition, the WFGD system was better at removing these two esters when the unit was operating at full load. However, it had a negative effect on n-alkanes, which increased the concentration of n-alkanes by 8.91 to 19.72%. Furthermore, it is concluded that the concentration distribution of the same type of organic pollutants in desulfurization wastewater was similar to that in desulfurization slurry, but quite different from that in coal-fired flue gas. The exchange of three organic pollutants between flue gas and desulfurization slurry was not significant, while the concentration distribution of organic matters in gypsum was affected by coal-fired flue gas.