Photofunctional Cyclometalated Iridium(III) Polypyridine Complexes Bearing a Perfluorobiphenyl Moiety for Bioconjugation, Bioimaging, and Phototherapeutic Applications.

In this article, we report the design, synthesis, and characterization of a series of cyclometalated iridium(III) polypyridine complexes containing a perfluorobiphenyl (PFBP) moiety [Ir(N^C)2(bpy-PFBP)](PF6) (bpy-PFBP = 4-(S-(perfluoro-(1,1'-biphenyl)-4-yl)-N-mercaptoethylaminocarbonyloxymethyl)-4'-methyl-2,2'-bipyridine; HN^C = 2-phenylpyridine (Hppy) (1a), 2-(4-hydroxymethylphenyl)pyridine (Hppy-CH2OH) (2a), 2-((1,1'-biphenyl)-4-yl)pyridine (Hpppy) (3a), 2-((4'-hydroxymethyl-1,1'-biphenyl)-4-yl)pyridine (Hpppy-CH2OH) (4a), 2-phenylquinoline (Hpq) (5a), 2-(4-hydroxymethylphenyl)quinoline (Hpq-CH2OH) (6a)). Their PFBP-free counterparts [Ir(N^C)2(bpy-C4)](PF6) (bpy-C4 = 4-(N-n-butylaminocarbonyloxymethyl)-4'-methyl-2,2'-bipyridine; HN^C = Hppy (1b), Hppy-CH2OH (2b), Hpppy (3b), Hpppy-CH2OH (4b), Hpq (5b), Hpq-CH2OH (6b)) were also prepared for comparison studies. Upon irradiation, all the complexes displayed intense and long-lived greenish-yellow to orange luminescence in solutions under ambient conditions and in low-temperature alcohol glass. Reactions of the PFBP complexes with peptides containing the FCPF sequence via the π-clamp-mediated cysteine conjugation afforded luminescent peptide conjugates that exhibited rich photophysical properties. Using complex 3a as an example, we demonstrated that the conjugation of complexes to organelle-targeting peptides is an effective means to modulate their intracellular localization behavior, which was further shown to be important to their performance in photodynamic therapy. The results of this work will contribute to the development of photofunctional transition metal complexes as theranostic agents.

Interactions of Calcium with Chlorogenic and Rosmarinic Acids: An Experimental and Theoretical Approach.

Chlorogenic (CA) and rosmarinic (RA) acids are two natural bioactive hydroxycinnamic acids whose antioxidant properties can be modulated by the chelation of metal ions. In this work, the interactions of these two carboxylic phenols with calcium ions and the impact of such interactions on their antioxidant activity were investigated. UV-Vis absorbance, mass spectroscopy and 1H and 13C liquid NMR were used to identify complexes formed by CA and RA with calcium. Antioxidant activities were measured by the Bois method. Density functional theory (DFT) calculations were performed to evaluate the most stable configurations and correlated with NMR data. Taken together, these data suggest that calcium ions mainly interact with the carboxylate groups of both molecules but that this interaction modifies the reactivity of the catechol groups, especially for RA. These results highlight the complex interplay between metal chelation and antioxidant properties of natural carboxylic phenols.

In vitro antioxidant activity and solar protection factor of blackberry and raspberry extracts in topical formulation.

BACKGROUND: Berries are known for their antioxidant activity due to the presence of flavonoids. Antioxidants' usage guarantees skin protection against free radicals and, flavonoids, especially, can act as sunscreen. The aim of this paper was to evaluate solar protection factor (SPF) and antioxidant activity in vitro of blackberry and raspberry extracts incorporated in topical formulation and study their stability. RESULTS: Raspberry presented 29.93 mg of anthocyanins/100 g of fruit and blackberry 65.58 mg of anthocyanins/100 g of fruit. In vitro solar protection factor was 54.57 to blackberry and 37.32 to raspberry. When incorporated in O/W emulsions, final formulations showed light pink color, creamy aspect, and typical fruity odor. Formulations submitted to indirect light and stove showed odor and color alterations. CONCLUSIONS: Based on the results, formulations containing extracts should be kept under refrigeration in opaque package to ensure stability due to the presence of flavonoids. In addition, blackberry and raspberry extracts are potential natural alternatives to be used as sunscreen and to prevent skin aging.

Light curing resin cements containing iodonium salts promote suitable apical bonding of posts to radicular dentin.

The aim of this study was to analyze the efficiency of experimental light-curing resin cements (ERCs) with a ternary photo-initiator system containing diphenyliodonium hexafluorphosphate (DPI) and different amines on retention of glass-fiber posts to dentin (GFP). ERCs formulations: a 1:1 mass ratio of 2,2-bis[4-(2-hydroxy-3-methacryloxypropoxy)phenylpropane and triethyleneglycol dimethacrylate. Camphorquinone was used as initiator. Six experimental groups were established according to the amine used: [ethyl-4-(dimethylamino)benzoate-EDMAB or 2-(dimethylamino)ethyl methacrylate-DMAEMA] and the concentration of DPI (0, 0.5 mol%, 1 mol%). The resin cements Variolink II (dual- and light-cured versions) were used as commercial reference. Eighty recently extracted bovine incisors (n = 10) were selected for this study. The roots were prepared and the fiber posts were cemented with the resin cement specified for each experimental group. Specimens from coronal, middle, and apical thirds of the root were subjected to push-out bond strength test 24 hours after bonding. Data were subjected to split-plot ANOVA and the Tukey test (p = 0.05). ERCs containing DPI showed statistically significant higher bond strengths compared with ERCs without DPI. ERCs containing DPI were statistically similar to VARIOLINK II - dual-cured and superior to VARIOLINK II - light-cured (except for EDMAB - 1DPI in the medium third and DMAEMA - 1DPI in the coronal third). Different amines did not influence post retention. The apical root region showed the lowest bond strength for the groups EDAB-0DPI, DMAEMA-0DPI and VARIOLINK II light-cured. Light-cured ERCs containing DPI were efficient for GFP retention to radicular dentin, with similar behaviour to that of dual-curing commercial resin cement.

Light curing resin cements containing iodonium salts promote suitable apical bonding of posts to radicular dentin

Abstract The aim of this study was to analyze the efficiency of experimental light-curing resin cements (ERCs) with a ternary photo-initiator system containing diphenyliodonium hexafluorphosphate (DPI) and different amines on retention of glass-fiber posts to dentin (GFP). ERCs formulations: a 1:1 mass ratio of 2,2-bis[4-(2-hydroxy-3-methacryloxypropoxy)phenylpropane and triethyleneglycol dimethacrylate. Camphorquinone was used as initiator. Six experimental groups were established according to the amine used: [ethyl-4-(dimethylamino)benzoate-EDMAB or 2-(dimethylamino)ethyl methacrylate-DMAEMA] and the concentration of DPI (0, 0.5 mol%, 1 mol%). The resin cements Variolink II (dual- and light-cured versions) were used as commercial reference. Eighty recently extracted bovine incisors (n = 10) were selected for this study. The roots were prepared and the fiber posts were cemented with the resin cement specified for each experimental group. Specimens from coronal, middle, and apical thirds of the root were subjected to push-out bond strength test 24 hours after bonding. Data were subjected to split-plot ANOVA and the Tukey test (p = 0.05). ERCs containing DPI showed statistically significant higher bond strengths compared with ERCs without DPI. ERCs containing DPI were statistically similar to VARIOLINK II - dual-cured and superior to VARIOLINK II - light-cured (except for EDMAB - 1DPI in the medium third and DMAEMA - 1DPI in the coronal third). Different amines did not influence post retention. The apical root region showed the lowest bond strength for the groups EDAB-0DPI, DMAEMA-0DPI and VARIOLINK II light-cured. Light-cured ERCs containing DPI were efficient for GFP retention to radicular dentin, with similar behaviour to that of dual-curing commercial resin cement.

Photochemical reaction between biphenyl and N(III) in the atmospheric aqueous phase.

The photochemical reaction between biphenyl (Bp) and N(III) under irradiation at 365 nm UV light was investigated. The results showed that Bp conversion efficiency was strongly influenced by N (III) concentration, Bp initial concentration and pH. Species-specific rate constants determined by reaction of Bp with H2ONO+ (k1), HONO (k2) and NO2- (k3) were k1 = (0.058 ± 0.005 L mol-1 s-1), k2 = (0.12 ± 0.06 L mol-1 s-1) and k3 = (0.0019 ± 0.0003 L mol-1 s-1), respectively. Laser flash photolysis studies confirmed that OH radical deriving from the photolysis of N(III) attacked aromatic ring to form Bp-OH adduct with a rate constant of 9.4 × 109 L mol-1 s-1. The products analysis suggested that Bp-OH adduct could be nitrated by N (III) and NO2 to generate nitro-compounds.

Tris-biphenyl triazine, a new ultraviolet filter studied in terms of photoprotective efficacy.

There are relatively few authorized ultraviolet filters in Europe and this presents a certain number of problems when we want to formulate a sun protection product which both ensures a high level of protection and respects the recommendations in force in terms of broad-spectrum efficacy, with, in particular, a critical wavelength (λc) greater than or equal to 370 nm. A new ultraviolet filter has just been launched on the market. Known as tris-biphenyl triazine, it is the first filter to be registered on Annexe VI of "Cosmetics Regulation" (EC) No. 1223/2009 of the European Parliament and of the Council, which gives a list of the ultraviolet filters allowed in cosmetic products, since the regulation came into force in July 2013. This filter is both very effective (as it enables 2 SPF units and 1 UVA-PF units to be obtained respectively, by percentage of use) and very photostable (since the SPF and UVA-PF do not vary after 2h of irradiation in a solar simulator). Its broad spectrum associated with its qualities in terms of efficacy and photostability make it a choice ingredient for the formulation of sun protection products.

Photo-activated ionic gelation of alginate hydrogel: real-time rheological monitoring of the two-step crosslinking mechanism.

We examine the gelation of alginate undergoing ionic crosslinking upon ultraviolet (UV) irradiation using in situ dynamic rheology. Hydrogels are formed by combining alginate with calcium carbonate (CaCO3) particles and a photoacid generator (PAG). The PAG is photolyzed upon UV irradiation, resulting in the release of free calcium ions for ionic crosslinking. The viscous and elastic moduli during gelation are monitored as a function of the UV irradiation intensity, exposure time, alginate concentration, and the ratio between alginate and calcium carbonate. Gel time decreases as irradiation intensity increases because a larger concentration of PAG is photolyzed. Interestingly, dark curing, the continuing growth of microstructure in the absence of UV light, is observed. In some instances, the sample transitions from a solution to a gel during the dark curing phase. Additionally, when exposed to constant UV irradiation after the dark curing phase, samples reach the same plateau modulus as samples exposed to constant UV without dark curing, implying that dark curing does not affect the gelation mechanism. We believe the presence of dark curing is the result of the acidic environment persisting within the sample, allowing CaCO3 to dissociate, thereby releasing free Ca(2+) ions capable of binding with the available appropriate ionic blocks of the polymer chains. The growth of microstructure is then detected if the activation barrier has been crossed to release sufficient calcium ions. In this regard, we calculate a value of 30 J that represents the activation energy required to initiate gelation.

UV-visible degradation of boscalid--structural characterization of photoproducts and potential toxicity using in silico tests.

RATIONALE: Boscalid is a carboximide fungicide mainly used for vineyard protection as well as for tomato, apple, blueberry and various ornamental cultivations. The structural elucidation of by-products arising from the UV-visible photodegradation of boscalid has been investigated by gas chromatography/multi-stage mass spectrometry (GC/MS(n) ) and liquid chromatography/tandem mass spectrometry (LC/MS/MS) couplings. The potential toxicities of transformation products were estimated by in silico calculations. METHODS: Aqueous solutions of boscalid were irradiated up to 150 min in a self-made reactor equipped with a mercury lamp. Analyses were carried out using a gas chromatograph coupled with an ion trap mass spectrometer operated in both electron ionization (EI) and chemical ionization (CI) modes and a liquid chromatograph coupled with a quadrupole time-of-flight (Q-TOF) mass spectrometer operated in electrospray ionization (ESI) mode. Multiple-stage collision-induced dissociation (CID) experiments were performed to establish dissociation pathways of ions. The QSAR (Quantitative Structure-Activity Relationship) T.E.S.T. program allowed the estimation of the toxicities of the by-products. RESULTS: Eight photoproducts were investigated. Chemical structures were proposed not only on the interpretation of multi-stage CID experiments, but also on kinetics data. These structures led us to suggest photodegradation pathways. Three photoproducts were finally detected in Lebanon in a real sample of grape leaves for which routine analysis had led to the detection of boscalid at 4 mg kg(-1). CONCLUSIONS: With one exception, the structures proposed for the photoproducts on the basis of mass spectra interpretation have not been reported in previous studies. In silico toxicity predictions showed that two photoproducts are potentially more toxic than the parent compound considering oral rat LD50 while five photoproducts may induce mutagenic toxicity. With the exception of one compound, all photoproducts may potentially induce developmental toxicity.

Electro-optic phase modulation in light induced self-written waveguides propagated in a 5CB doped photopolymer.

We present the inscription of a Light Induced Self-Written (LISW) waveguide in a 4-cyano-4'-pentylbipheny (5CB) doped photopolymer. The dynamic reorientation of the 5CB molecules in the material under applied electric field leads to birefringence in LISW waveguide and thus allows the control of the phase of the guided mode.

Properties of the static NMR response of a confined thin nematic film of 5CB-d2 under crossed electric and magnetic fields: theory and experiments.

This work describes an investigation of the static (or quasistatic) nuclear magnetic resonance (NMR) response in a nematic liquid crystal confined between two planar conducting plates and subject to a magnetic field and an electric field produced by a difference of voltage applied on the plates. Deuterium NMR spectroscopy of 4-pentyl-d(2)-4'-cyanobiphenyl (5CB-d(2)) under these conditions has revealed a voltage dependent inhomogeneous director distribution for a particular narrow range of voltages and for a fixed magnetic field (that of the spectrometer). In the ideal setup the two plates are assumed to be rigorously parallel, so that a difference of voltage applied on the plates leads to a constant electric field normal to them. When the magnetic field is parallel to the plates (orthogonal geometry) there exists a threshold value of the electric field for which the effect of both fields exactly compensate; moreover, for stronger electric field the director aligns with the electric field while for weaker electric field the director aligns with the magnetic field. If there is a lack of parallelism between the two plates, the electric field becomes inhomogeneous so that it may be larger than the threshold value in some region of the sample and smaller in the remaining part of the sample. In that case the director will adopt essentially two orientations within the sample, namely, parallel or perpendicular to the magnetic field, and the position of the frontier between the two domains depends on the voltage. This feature is clearly shown by deuterium NMR spectra that exhibit a transfer of intensity between two quadrupolar doublets with increase in the applied voltage. The coexistence of two director populations occurs for a range of voltages that depends on the degree of nonparallelism; accordingly, an estimation of this range by NMR yields an experimental estimation of the lack of parallelism. A tiny tilt of the magnetic field (nonorthogonal geometry) entrains a notably different behavior since a single doublet with voltage dependent splitting is observed in this case. In a first stage (simple model) of this work, the main features observed for the orthogonal and nonorthogonal geometries are interpreted within the framework of Leslie-Ericksen theory by employing the concept of a single effective field replacing the two real fields. However, the spectra reveal an additional director distribution, especially for the orthogonal geometry, that cannot be interpreted by this simple approach. In a second stage (advanced model), these less clear features have been investigated by numerical simulations of a two-dimensional model which includes the effects of inversion walls and of the high relative dielectric anisotropy of 5CB.

Polymerization kinetics and reactivity of alternative initiators systems for use in light-activated dental resins.

OBJECTIVES: The purpose of this study was to evaluate the reactivity and polymerization kinetics behavior of a model dental adhesive resin with water-soluble initiator systems. METHODS: A monomer blend based on Bis-GMA, TEGDMA and HEMA was used as a model dental adhesive resin, which was polymerized using a thioxanthone type (QTX) as a photoinitiator. Binary and ternary photoinitiator systems were formulated using 1mol% of each initiator. The co-initiators used in this study were ethyl 4-dimethylaminobenzoate (EDAB), diphenyliodonium hexafluorophosphate (DPIHFP), 1,3-diethyl-2-thiobarbituric acid (BARB), p-toluenesulfinic acid and sodium salt hydrate (SULF). Absorption spectra of the initiators were measured using a UV-Vis spectrophotometer, and the photon absorption energy (PAE) was calculated. The binary system camphorquinone (CQ)/amine was used as a reference group (control). Twelve groups were tested in triplicate. Fourier-transform infrared spectroscopy (FTIR) was used to investigate the polymerization reaction during the photoactivation period to obtain the degree of conversion (DC) and maximum polymerization rate (R(p)(max)) profile of the model resin. RESULTS: In the analyzed absorption profiles, the absorption spectrum of QTX is almost entirely localized in the UV region, whereas that of CQ is in the visible range. With respect to binary systems, CQ+EDAB exhibited higher DC and R(p)(max) values. In formulations that contained ternary initiator systems, the group CQ+QTX+EDAB was the only one of the investigated experimental groups that exhibited an R(p)(max) value greater than that of CQ+EDAB. The groups QTX+EDAB+DPIHFP and QTX+DPIHFP+SULF exhibited values similar to those of CQ+EDAB with respect to the final DC; however, they also exhibited lower reactivity. SIGNIFICANCE: Water-soluble initiator systems should be considered as alternatives to the widely used CQ/amine system in dentin adhesive formulations.

Interaction of LED light with coinitiator-containing composite resins: effect of dual peaks.

OBJECTIVES: Recently the colour stability of composite resins has been an issue due to the emphasis on the aesthetics of restored teeth. The purpose of the present study was to investigate how dual-peak LED units affect the polymerization of coinitiator-containing composite resins. MATERIALS AND METHODS: Five composite resins [coinitiator-containing: Aelite LS Posterior (AL), Tetric EvoCeram (TE), and Vit-l-escence (VI); only CQ-containing: Grandio (GD) and Filtek Z350 (Z3)] were light cured using four different light-curing units (LCUs). Among them, Bluephase G2 (BP) and G-light (GL) were dual-peak LED LCUs. Microhardness, polymerization shrinkage, flexural, and compressive properties were measured. RESULTS: BP and GL had no consistent effect on the microhardness of AL, TE, and VI on the top and bottom surfaces of resin specimens. Among the specimens, AL and VI showed the least (9.86-10.41 µm) and greatest (17.58-19.21 µm) polymerization shrinkage, respectively. However, the effect of BP and GL on the shrinkage of specimens was not consistent. Among the specimens, GD showed the greatest flexural properties [strength (FS) and modulus (FM)] and TE showed the lowest flexural and compressive properties [strength (CS) and modulus (CM)]. In same resin product, maximum FS and CS differences due to the different LCUs were 10.3-21.0% and 3.6-9.2%, respectively. Furthermore, the influences of BP and GL on FS and CS were not consistent. CONCLUSION: The tested dual-peak LED LCUs had no consistent synergic effect on the polymerization of coinitiator-containing composite resins as compared with QTH and single-peak LED LCUs. CLINICAL SIGNIFICANCE: The dual-peak LED LCUs achieve a similar degree of polymerization in coinitiator-composite resins as QTH and single-peak LED LCUs did. Choice of LCU does not appear to be a determinant of the light curing of coinitiator-composite resins.

Medium effects on the direct cis-trans photoisomerization of 1,4-diphenyl-1,3-butadiene in solution.

Quantum yields for the photoisomerization of trans,trans-1,4-diphenyl-1,3-butadiene (tt-DPB), determined in benzene, cyclohexane, methylcyclohexane, hexane, and perfluorohexane, confirm the low values reported earlier for benzene and cyclohexane and reveal even lower values in the last two solvents. In contrast to trans-stilbene (t-St), fluorescence and torsional relaxation leading to photoisomerization do not account exclusively for S(1)tt-DPB decay. Competing radiationless singlet excited-state decay pathways exist in tt-DPB, which do not lead to photoisomerization and may not involve large-amplitude torsional motions. Our results invalidate analyses of tt-DPB fluorescence quantum yields and lifetimes that assign all radiationless decay to the isomerization channel. Gas-phase chromatography analysis of tt-DPB photoisomerization in hexane shows the reaction to be concentration-independent and reveals, for the first time, a significant, two-bond photoisomerization pathway, φ(tt→tc) = 0.092 and φ(tt→cc) = 0.020. The dominant one-bond-twist (OBT) process is accompanied by a bicycle pedal (BP) process that accounts for almost 20% of tt-DPB photoisomerization. The OBT tt-DPB photoisomerization quantum yield is largest in benzene (Bz) and smallest in perfluorohexane (PFH). Contrary to expectations, reduction in medium friction in PFH is accompanied by a decrease in φ(tt→tc). The 1(1)B(u)/2(1)A(g) order and energy gap appear to control the contribution of torsional relaxation to radiationless decay. Lowering the 1(1)B(u) energy as in Bz favors photoisomerization. Reversal of the 1(1)B(u)/2(1)A(g) order in PFH is accompanied by short τ(f) and small φ(f) and φ(tt→tc) values that suggest the presence of competing 2(1)A(g) → 1(1)Ag relaxation paths that are unproductive with respect to photoisomerization. We conclude that the Birks extension to diphenylpolyenes of the Orlandi-Siebrand cis-trans photoisomerization mechanism is not valid. Photoisomerization appears to occur in the 1(I)B(u) state, and we argue that this applies to t-St as well.

Controlling liquid crystal alignment using photocleavable cyanobiphenyl self-assembled monolayers.

We report on the development of novel cyano-biphenyl-based thiolate self-assembled monolayers designed to promote homeotropic alignment of calamitic liquid crystals. The molecules developed contain an ortho-nitrobenzyl protected carboxylic acid group that on irradiation by soft UV (365 nm) is cleaved to yield carboxylic acid groups exposed at the surface that promote planar alignment. Using a combination of wetting, X-ray photoelectron spectroscopy, Fourier transform-infrared reflection absorption spectroscopy, and ellipsometry we show that high photolysis yields (>90%) can be achieved and that the patterned SAMs are suitable for the controlled alignment of calamitic liquid crystals. This study further shows that such photo-patterned SAMs can be used to control the formation of focal conic domains (FCDs) in the smectic-A phase in terms of positioning and size confinement on surfaces.

Evaluation of silymarin as a promising radioprotector.

Silymarin, a purified extract of seeds of Silybum marianum L. and well known for its hepatoprotective abilities, has been evaluated for inherent utility as a radioprotective agent. A fraction (INM-7035) was authenticated by characterizing the percentage composition of silybin A and B (39.9% and 57.4%). Free radical scavenging activities of INM-7035 against superoxide radicals (>68%), hydroxyl radicals (>33.75%), DPPH (67.2%), and ABTS (32.4%) were also evaluated. The fraction chelated (>30%) ferrous ions, thereby able to restrict amplification. INM-7035 exhibited >50% peroxyl radical scavenging activity in the lipid phase along with dose-dependent (R2 = 0.990) reducing power in the aqueous phase. Radiation-induced free radical flux can lead to disruption of biomolecules like membrane lipids. INM-7035 completely inhibited lipid peroxidative stress in case of membranes against supralethal radiation stress in the liposomal system. The ability of INM-7035 to modulate the levels of NF-kappaB, indicated its inherent potential as a radioprotective bioactive constituent.

Janus nematic colloids driven by light.

We present an experimental analysis of different equilibrium orientations and light driven transformations of Janus particles in the nematic liquid crystal 5CB. Depending on the preparation technique of homeotropic (DMOAP) and planar (Au) hemispheres we have observed two types of director field configurations: dipolar-like in the case of Au/DMOAP capped colloids and boojum-like in the case of DMOAP/Au capped colloids. Using the manipulation of Au/DMOAP capped colloids with laser tweezers we report on light driven irreversible orientational transformations into Saturn-ring and a novel, boojum-ring configuration. On the contrary, boojum-like DMOAP/Au capped colloids can act as rotators when exposed to the laser filed. Observed rotation is continuous around an axis perpendicular to the laser beam axis, with the frequency increasing linearly with the laser power.

Stepwise laser photolysis studies of beta-bond cleavage in highly excited triplet states of biphenyl derivatives having C-O bonds.

Photochemical profiles of beta-bond dissociation in highly excited triplet states (Tn) of biphenyl derivatives having C-O bonds were investigated in solution, using stepwise laser photolysis techniques. The lowest triplet states (T1) were produced by triplet sensitization of acetone (Ac) upon 308-nm laser photolysis. The molar absorption coefficients of the T1 states were determined using triplet sensitization techniques. Any photochemical reactions were absent in the T1 states. Upon 355-nm laser flash photolysis of the T1 states, they underwent fragmentation, because of homolysis of the C-O bond in the Tn states from the observations of the transient absorption of the corresponding radicals. The quantum yields (Phidec) for the decomposition of the T1 states upon the second 355-nm laser excitation were determined. Based on the Phidec values and the bond dissociation energies (BDEs) for the C-O bond fission, the state energies (ERT) of the reactive highly excited triplet states (TR) were determined. It was revealed that (i) the Phidec was related to the energy difference (DeltaE) between the BDE and the ERT, and (ii) the rate (kdis) of beta-cleavage in the TR state was formulated as being simply proportional to DeltaE. The reaction mechanism for beta-bond cleavage in the TR states was discussed.

Products of the triplet excited state produced in the radiolysis of liquid benzene.

The radiation chemical yields of the products derived from the triplet excited state produced in the radiolysis of liquid benzene with gamma-rays, 10 MeV 4He ions, and 10 MeV 12C ions have been determined. Iodine scavenging techniques have been used to examine the formation and role of radicals, especially the H atom and phenyl radical. For all irradiation types examined here, the increase in hydrogen iodide yields with increasing iodine concentration matches the increase in iodobenzene yields. This agreement suggests that the benzene triplet excited state is the common precursor for the H atom and the phenyl radical. Pulse radiolysis studies in liquid benzene have determined the rate coefficients for the reactions of phenyl radicals with iodine and with the solvent benzene to be 9.3 x 10(9) M(-1) s(-1) and 3.1 x 10(5) M(-1) s(-1), respectively. Direct measurements of polymer formation, which refers to trimers (C18) and higher order compounds (>C18), in liquid benzene radiolysis using gamma-rays, 4He ions, and 12C ions at relatively high doses have been performed using gel permeation chromatography. The yields of trimers increase from gamma-rays to 12C ions due to the increased importance of intratrack radical-radical reactions that can be scavenged by the radical scavenging reactions of iodine. On the other hand, the >C18 product yields decrease from gamma-rays to 12C ions. The structure of the polymer consists of a partly saturated ring as determined by infrared and gas chromatography/mass spectrometry studies. A schematic representation for the radiolytic decomposition of the benzene triplet excited state is presented.

The direct detection of an aryl azide excited state: an ultrafast study of the photochemistry of para- and ortho-biphenyl azide.

Ultrafast laser flash photolysis (266 nm) of para- and ortho-biphenyl azide in acetonitrile produces azide excited states that have broad absorption bands centered at 480 nm. The para-biphenyl azide excited singlet state has a lifetime of 100 fs. The excited-state lifetime of the ortho-azide isomer is 450 +/- 150 fs. Decay of the azide excited states is accompanied by the formation of the corresponding known singlet nitrenes (para, lambdamax = 350 nm, ortho, lambdamax = 400 nm). Singlet para-biphenylnitrene is born with excess energy and undergoes vibrational cooling with a time constant of 11 ps to form the long-lived (tau approximately 9 ns) relaxed singlet nitrene. Singlet ortho-biphenylnitrene decays with a lifetime of 16 ps in acetonitrile at ambient temperature.