LC-MS/MS characterisation and determination of dansyl chloride derivatised glyphosate, aminomethylphosphonic acid (AMPA), and glufosinate in foods of plant and animal origin.

Glyphosate and other polar and acidic pesticides have been particularly studied due to the concerns over widespread and intensive use. The chemical properties of these compounds necessitate use of customised methods, such as derivatisation or ion exchange chromatography. These approaches present a compatibility problem with ESI-MS due to presence of salts and non-volatile compounds. For that reason, a simple procedure has been developed for the extraction, pre-column derivatisation with dansyl chloride (5-(dimethylamino)naphthalene-1-sulfonyl chloride), and mass spectrometric detection of glyphosate, AMPA, and glufosinate after the separation on a C18stationary phase. The dansyl derivatives were characterised with ESI-MS and their separation from derivatisation reagent byproducts was demonstrated with UV absorption detection. Reagent byproducts eluted before the analytes and were separated from the analytes completely, thus the proposed procedure did not contaminate the mass spectrometers. The proposed procedure was evaluated with respect to the matrix effects and extraction efficiency, and was validated with different mass spectrometers for milk, cucumber, honey, porridge formula, bovine kidney and liver matrix. The LOQ was 10 µg kg-1 for AMPA and glufosinate, and 10-25 µg kg-1for glyphosate, depending on matrix. Measurement uncertainties ranged from 4 to 44%. Method performance was compared to the QuPPe (Quick Polar Pesticides) procedure in combination with a diethylamino-based column from Waters™. In the case of Orbitrap™ detection, the proposed procedure had a comparable performance to the QuPPe procedure. Although, improved peak shape, higher absolute peak intensity, and lower standard deviation of the calibration curve slope was observed with the proposed procedure. This could be explained by the superior electrospray stability and lower extent of ion suppression.

The dose effect of dansyl chloride on the derivative products of bisphenols and its application for the determination of bisphenols in human serum by high-performance liquid chromatography-tandem mass spectrometry.

Human exposure to bisphenols has rarely been reported. The most important challenges in this regard are the sensitivity and accuracy of the analytical methods employed. Dansyl chloride derivatization prior to high-performance liquid chromatography-tandem mass spectrometry has been prevalently employed to improve sensitivity. However, the dose effect of the derivatization reagent on the reaction products is not well understood, especially for reactants with two or more active groups. This study investigated the mass ratio of dansyl chloride to bisphenols and found the mass ratio played a vital role in changing the composition of derivatives; further, the optimal ratio for obtaining di-substituted derivatives was confirmed. Under optimal conditions, solid-phase extraction followed by dansyl chloride derivatization coupled with high-performance liquid chromatography-tandem mass spectrometry was used to detect eight bisphenols in human serum samples. The method detection limits of the eight bisphenols were 0.025-0.28 ng/mL, and the recoveries were 72.9-121.7% by spiking bisphenols (2, 5, and 20 ng/mL) into bovine serum. The detection frequencies of bisphenol A and bisphenol F in 73 serum samples obtained from children from Guangzhou were 41.1% and 71.2%, respectively, while the detection frequencies of other bisphenols were below 20%. The concentrations of bisphenol A and bisphenol F were < 0.28-8.0 ng/mL and < 0.028-7.6 ng/mL, respectively.

Facile preparation of ethanediamine-ß-cyclodextrin modified capillary column for electrochromatographic enantioseparation of Dansyl amino acids.

Herein, the fabrication of a fascinating multifunctional cyclodextrin (CD) chiral stationary phase and its chiral separation performance in capillary electrochromatography are proposed. A facile interfacial polymerization was used to anchor ethanediamine-ß-cyclodextrin (EDA-ß-CD) polymerized with trimesoyl chloride (TMC) and to form the chiral stationary phase (CSP) composite onto the surface wall of the capillary. The characters of prepared columns were confirmed by Fourier transform infrared spectroscopy (FT-IR), X-ray Photoelectron Spectrometer (XPS), scanning electron microscopy (SEM) and energy dispersive X-ray spectrometry (EDS). This novel CSP offers multi-typical interactions including hydrogen bonding, π-interaction, hydrophobic and electrostatic interaction as well as steric effects which contribute to prominent chiral recognition for Dansyl-DL-amino acids in CEC modes. The EDA-ß-CD modified column showed eminent enantioseparation performance towards five Dansyl-DL-amino acids (the DL-forms of valine, threonine, leucine, phenylalanine, serine). Besides, the prepared columns were perfectly reproducible and stable. The relative standard deviations of the enantiomer retention times for intra-day (n = 5), inter-day (n = 3) runs and column-to-columns (n = 3) are below 0.54%, 1.35% and 4.89%, individually. This innovative chiral stationary phase shows a broader application view and scope in chiral recognition domain.

DnsID in MyCompoundID for rapid identification of dansylated amine- and phenol-containing metabolites in LC-MS-based metabolomics.

High-performance chemical isotope labeling (CIL) liquid chromatography-mass spectrometry (LC-MS) is an enabling technology based on rational design of labeling reagents to target a class of metabolites sharing the same functional group (e.g., all the amine-containing metabolites or the amine submetabolome) to provide concomitant improvements in metabolite separation, detection, and quantification. However, identification of labeled metabolites remains to be an analytical challenge. In this work, we describe a library of labeled standards and a search method for metabolite identification in CIL LC-MS. The current library consists of 273 unique metabolites, mainly amines and phenols that are individually labeled by dansylation (Dns). Some of them produced more than one Dns-derivative (isomers or multiple labeled products), resulting in a total of 315 dansyl compounds in the library. These metabolites cover 42 metabolic pathways, allowing the possibility of probing their changes in metabolomics studies. Each labeled metabolite contains three searchable parameters: molecular ion mass, MS/MS spectrum, and retention time (RT). To overcome RT variations caused by experimental conditions used, we have developed a calibration method to normalize RTs of labeled metabolites using a mixture of RT calibrants. A search program, DnsID, has been developed in www.MyCompoundID.org for automated identification of dansyl labeled metabolites in a sample based on matching one or more of the three parameters with those of the library standards. Using human urine as an example, we illustrate the workflow and analytical performance of this method for metabolite identification. This freely accessible resource is expandable by adding more amine and phenol standards in the future. In addition, the same strategy should be applicable for developing other labeled standards libraries to cover different classes of metabolites for comprehensive metabolomics using CIL LC-MS.

Determination of dansylated amino acids and biogenic amines in Cannonau and Vermentino wines by HPLC-FLD.

Free amino acids (AA) and biogenic amines (BA) were quantified for the first time in Cannonau and Vermentino wines, the two most popular "Controlled Designation of Origin" wines from Sardinia (Italy). An analytical method for the simultaneous determination of AA and BA was developed, using selective derivatization with dansyl chloride followed by HPLC with fluorescence detection. Thirty-two compounds were identified in the wines analysed. High levels of AA were found, with proline being the most abundant with average levels of 1244 ± 398 and 1008 ± 281 mg/L in Cannonau and Vermentino wines, respectively. BA were detected at average concentrations <10mg/L, except putrescine which reached 20.5 ± 10.2mg/L in Cannonau wines. Histamine was never detected in any Vermentino wines. γ-Aminobutyric acid, 4-hydroxyproline, glycine, leucine+isoleucine and putrescine proved to be useful for differentiating Cannonau wines from Vermentino wines.

Counting missing values in a metabolite-intensity data set for measuring the analytical performance of a metabolomics platform.

Metabolomics requires quantitative comparison of individual metabolites present in an entire sample set. Unfortunately, missing intensity values in one or more samples are very common. Because missing values can have a profound influence on metabolomic results, the extent of missing values found in a metabolomic data set should be treated as an important parameter for measuring the analytical performance of a technique. In this work, we report a study on the scope of missing values and a robust method of filling the missing values in a chemical isotope labeling (CIL) LC-MS metabolomics platform. Unlike conventional LC-MS, CIL LC-MS quantifies the concentration differences of individual metabolites in two comparative samples based on the mass spectral peak intensity ratio of a peak pair from a mixture of differentially labeled samples. We show that this peak-pair feature can be explored as a unique means of extracting metabolite intensity information from raw mass spectra. In our approach, a peak-pair peaking algorithm, IsoMS, is initially used to process the LC-MS data set to generate a CSV file or table that contains metabolite ID and peak ratio information (i.e., metabolite-intensity table). A zero-fill program, freely available from MyCompoundID.org , is developed to automatically find a missing value in the CSV file and go back to the raw LC-MS data to find the peak pair and, then, calculate the intensity ratio and enter the ratio value into the table. Most of the missing values are found to be low abundance peak pairs. We demonstrate the performance of this method in analyzing an experimental and technical replicate data set of human urine metabolome. Furthermore, we propose a standardized approach of counting missing values in a replicate data set as a way of gauging the extent of missing values in a metabolomics platform. Finally, we illustrate that applying the zero-fill program, in conjunction with dansylation CIL LC-MS, can lead to a marked improvement in finding significant metabolites that differentiate bladder cancer patients and their controls in a metabolomics study of 109 subjects.

Quantitative metabolomic profiling using dansylation isotope labeling and liquid chromatography mass spectrometry.

Differential chemical isotopic labeling (CIL) LC-MS has been used for quantifying a targeted metabolite in biological samples with high precision and accuracy. Herein we describe a high-performance CIL LC-MS method for generating quantitative and comprehensive profiles of the metabolome for metabolomics applications. After mixing two comparative samples separately labeled by light or heavy isotopic tags through chemical reactions, the peak intensity ratio of the labeled analyte pair can provide relative or absolute quantitative information on the metabolites. We describe the use of (12)C2- and (13)C2-dansyl chloride (DnsCl) as the isotope reagents to profile the metabolites containing amine and phenolic hydroxyl functional groups by LC-MS. This method can be used to compare the relative concentration changes of hundreds or thousands of amine- and phenol-containing metabolites among many comparative samples and generate absolute concentration information on metabolites for which the standards are available. Combined with statistical analysis and metabolite identification tools, this method can be used to identify key metabolites involved in differentiating comparative samples such as disease cases vs. healthy controls.

Differential isotope dansylation labeling combined with liquid chromatography mass spectrometry for quantification of intact and N-terminal truncated proteins.

The N-terminal amino acids of proteins are important structure units for maintaining the biological function, localization, and interaction networks of proteins. Under different biological conditions, one or several N-terminal amino acids could be cleaved from an intact protein due to processes, such as proteolysis, resulting in the change of protein properties. Thus, the ability to quantify the N-terminal truncated forms of proteins is of great importance, particularly in the area of development and production of protein-based drugs where the relative quantity of the intact protein and its truncated form needs to be monitored. In this work, we describe a rapid method for absolute quantification of protein mixtures containing intact and N-terminal truncated proteins. This method is based on dansylation labeling of the N-terminal amino acids of proteins, followed by microwave-assisted acid hydrolysis of the proteins into amino acids. It is shown that dansyl labeled amino acids are stable in acidic conditions and can be quantified by liquid chromatography mass spectrometry (LC-MS) with the use of isotope analog standards.

Optimisation methodology in the chiral and achiral separation in electrokinetic chromatography in the case of a multicomponent sample of dansyl amino acids.

Two different chiral selectors synthesised in our laboratory were used to test the possibility of separation for a sample consisting of ten different enantiomeric pairs of dansyl-derivatives of α-amino acids in electrokinetic chromatography. It was possible to observe all the peaks, though only partly resolved, due to the twenty analytes through an accurate strategy of choice of the experimental conditions. As a part of this strategy, a procedure of identification of the single peaks in the electropherograms called LACI (lastly added component identification) has been developed.

Enantioselective separation of dansyl-DL-amino acids and some racemates on "click" functionalized native α-cyclodextrin based sub-2 µm columns.

The current work demonstrates that native α-cyclodextrin, anchored onto sub-2 µm silica particles via "click" reactions and packed into a 5 cm column, was found to be effective for the resolution of 11 pairs of dansyl-DL-amino acids (DAAs) using ultra-high performance liquid chromatography (UHPLC). All DAAs were completely or partially separated on the column and the resolution achieved for 7 pairs of DAAs was significantly greater than 1.5. It was found that the buffer type exerted a profound impact on the separation. The effects of analyte substituents adjacent to the chiral center of analytes as well as operation conditions with respect to the separation efficiency were discussed. Five racemic compounds with single or double rings also got resolved on this short α-CD column to some extent.

Light and heavy dansyl reporter groups in food chemistry: amino acid assay in beverages.

5-Dimethylamino-1-sulfonyl naphthalene (DNS, commonly referred as dansyl) is a functionality, bearing well-established properties in directing the fragmentation, by mass spectrometry (MS), of the corresponding ionized sulfonylated derivatives. This property is shared also by its labeled analogs. The use of d(0)/d(6) DNS derivatives is now exploited in the application of the well-established isotope dilution mass spectrometric approach in the assay of complex mixtures. A new method for the quantitation of amino acids (AAs) in beverages is therefore presented, which relies on liquid chromatographic separation of their N-dansylated derivatives followed by comparative electrospray tandem MS/MS of the d(0)/d(6) isobaric mixtures. Labeled and unlabeled DNS derivatives of the selected AAs are readily available by microwave-assisted synthetic protocols. The novelty of the method is represented by the use of heavy and light DNS-isotopologue providing suitable reporter groups. Multiple-reaction monitoring has been applied in the assay of AAs in wine, pineapple juice and bergamot juice with good-to-excellent results as proved by both relative standard deviation, lower than 15%, and by the accuracy values in the range 90-110%.

Comparison of separation performances of novel ß-cyclodextrin-based chiral stationary phases in high-performance liquid chromatographic enantioseparation.

Three ß-cyclodextrin-based chiral stationary phases were developed applying novel bonding chemistry. The separation performances of ß-cyclodextrin, (R,S)-2-hydroxypropyl-ß-cyclodextrin, and permethyl-ß-cyclodextrin-based CSPs were compared in the resolution of structurally divergent analytes, such as coumarins, dansyl amino acids, and propionic acid derivatives. Separations were carried out in reversed phase mode applying 0.1% triethylammonium phosphate (pH 3.5)/MeOH mobile phase systems in different compositions. Of the three novel CSPs the permethyl-ß-cyclodextrin bonded phase proved to be the most effective one for the enantioseparation of investigated analytes.

Evaluation of two derivatization reagents for the determination by LC-MS/MS of ammonia in cigarette mainstream smoke.

Ammonia in cigarette mainstream smoke was quantified by LC-MS/MS after derivatization. Two different reagents, fluorescamine and dansyl chloride, were investigated, but only the latter gave stable derivatives; therefore, it was considered the most appropriate choice. Smoke samples were collected on a Cambridge filter pad followed by an impinger containing a solution of hydrochloric acid. Ammonia was then derivatized with a 18.5 mM solution of dansyl chloride in acetonitrile at 70 °C for 30 min in a vial with the internal standard, (15)ND(4)Cl. The resulting derivative was analyzed by LC-MS/MS detection with an atmospheric pressure chemical ionization (APCI) interface in the positive ionization mode using multiple-reaction monitoring (MRM). Good linearity was obtained in the concentration range of 0.02-1.65 µg/mL (r(2) ≥ 0.999), and the limit of detection (LOD) was established at 0.006 µg/mL. This method has the advantage of being sensitive, efficient, and reliable and is not hindered by interferences from the sample matrix. It should thus be considered a reference method of choice for the determination of ammonia in smoke.

On-column labeling technique and chiral ligand-exchange CE with zinc(II)-L-arginine complex as a chiral selector for assay of dansylated D,L-amino acids.

A novel on-column labeling method of amino acid (AA) enantiomers by using dansyl chloride (Dns-Cl) has been explored combined with chiral ligand-exchange CE (CLE-CE) technique and UV detection. Efficient labeling was achieved by sequential injection of buffer, Dns-Cl, AA enantiomers, Dns-Cl and buffer at 0.2 psi for 10.0, 3.0, 24.0, 3.0, and 10.0 s, respectively. After injection, the sandwich sections were allowed to react at room temperature for 35.0 min. With this procedure, successful on-column labeling and CLE-CE separation of 17 pairs AA enantiomers have been achieved with a buffer of 100.0 mM boric acid, 5.0 mM ammonium acetate, 3.0 mM ZnSO4 and 6.0 mM L-Arg at pH 8.4, giving nine pairs fully enantioresolved with resolution in between 2.0 and 5.1. CLE-CE of some individual and mixed pairs was also demonstrated, much the same as using pre-column labeling. As validated by both artificially prepared solutions and serum samples, this new method was shown to be applicable to the quantitative analysis, with a linear range between 14.0 muM and 3.7 mM, correlation coefficient above 0.99 and recovery in between 90.4% and 111.7%. It was also demonstrated that the migration time-temperature based curve allows for temperature determination in CE by using this new method.

Enantioseparation of a novel "click" chemistry derived native beta-cyclodextrin chiral stationary phase for high-performance liquid chromatography.

A novel native beta-cyclodextrin chiral stationary phase was prepared via "click" chemistry with cuprous iodide-triphenylphosphine complex as the catalyst and applied for enantioseparation of Dns-amino acids, substituted phenyl and phenoxy group modified propionic acids, flavonoids, and some pharmaceutical compounds such as nimodipine, propranolol, brompheniramine and bendroflumethiazide in reversed-phase high-performance liquid chromatography. The studied analytes could be resolved under different separation conditions. The resolution of Dns-DL-Leu could reach 5.08 using a mobile phase consisting of 1% (w/w) triethylammonium acetate buffer (pH 4.11) and methanol (50:50 v/v). The effects of buffer pH and the content of organic modifier on enantioseparation of Dns-amino acids by this novel chiral phase were being investigated. The separation results demonstrate that click chemistry, a versatile reaction, affords a facile approach towards the preparation of stable chiral stationary phases.

The 3-amino-derivative of gamma-cyclodextrin as chiral selector of Dns-amino acids in electrokinetic chromatography.

The enantioseparation of the enantiomeric pairs of 10 Dns derivatives of alpha-amino acids was successfully carried out by using for the first time the 3-amino derivative of the gamma-cyclodextrin. The effects of pH and selector concentration on the migration times and the resolutions of analytes were studied in detail. 3-Deoxy-3-amino-2(S),3(R)-gamma-cyclodextrin (GCD3AM) shows very good chiral recognition ability even at very low concentrations at all the three investigated values of pH, as shown by the very large values of selectivity and resolution towards several pairs of amino acids. The role played by the cavity, the substitution site and the protonation equilibria on the observed properties of chiral selectivity, on varying the specific amino acid involved, is discussed.

Separation of dansylated amino acid enantiomers by chiral ligand-exchange CE with a zinc(II) L-arginine complex as the selecting system.

A facile chiral ligand-exchange capillary electrophoretic method has been explored for the enantioseparation and UV detection of dansyl-amino acids with Zn(II) L-arginine complex as a chiral selecting system. Successful enantioseparation of 17 pairs of amino acid enantiomers has been achieved with a buffer of 100 mM boric acid, 5 mM ammonium acetate, 3 mM ZnSO4 and 6 mM L-Arg at pH 8.0, of which 10 pairs were fully resolved with resolution in between 1.59 and 4.21. This new method was shown to be applicable to the separation of some mixed pairs of amino acids and to the quantitative analysis of some real samples such as rice vinegars, with a linear range between 0.8 and 150 microg/mL, correlation coefficient above 0.99 and recovery in between 90.1 and 112.4%. It was found that amino acids with low resistance side chain(s), low tendency to form intramolecular hydrogen bond or high tendency to form intermolecular hydrogen bonds are more easily enantioseparated than those with extra carboxyl and/or phenyl groups. By the use of the suggested buffer, the running pH should be selected at 7.4-9.0 to compromise the resolution and elution speed.

Molecularly imprinted polymer based on chemiluminescence imaging for the chiral recognition of dansyl-phenylalanine.

A new molecularly imprinted polymer (MIP)-chemiluminescence (CL) imaging detection approach towards chiral recognition of dansyl-phenylalanine (Phe) is presented. The polymer microspheres were synthesized using precipitation polymerization with dansyl-L-Phe as template. Polymer microspheres were immobilized in microtiter plates (96 wells) using poly(vinyl alcohol) (PVA) as glue. The analyte was selectively adsorbed on the MIP microspheres. After washing, the bound fraction was quantified based on peroxyoxalate chemiluminescence (PO-CL) analysis. In the presence of dansyl-Phe, bis(2,4,6-trichlorophenyl)oxalate (TCPO) reacted with hydrogen peroxide (H2O2) to emit chemiluminescence. The signal was detected and quantified with a highly sensitive cooled charge-coupled device (CCD). Influencing factors were investigated and optimized in detail. Control experiments using capillary electrophoresis showed that there was no significant difference between the proposed method and the control method at a confidence level of 95%. The method can perform 96 independent measurements simultaneously in 30 min and the limits of detection (LODs) for dansyl-L-Phe and dansyl-D-Phe were 0.025 micromol L(-1) and 0.075 micromol L(-1) (3sigma), respectively. The relative standard deviation (RSD) for 11 parallel measurements of dansyl-L-Phe (0.78 micromol L(-1)) was 8%. The results show that MIP-based CL imaging can become a useful analytical technology for quick chiral recognition.

Monitoring of chemotherapy-induced cell death in melanoma tumors by N,N'-Didansyl-L-cystine.

Early assessment of the efficacy of anticancer agents is a highly desirable and an unmet need in clinical oncology. Clinical imaging of cell-death may be useful in addressing this need, as induction of tumor cell-death is the primary mechanism of action of most anticancer drugs. In this study, we examined the performance of N,N'-Didansyl-L-cystine (DDC), a member of the ApoSense family of novel small molecule detectors of cell-death, as a potential tool for monitoring cell-death in cancer models. Detection of cell-death by DDC was examined in fluorescent studies on B16 melanoma cells both in vitro and ex vivo following its in vivo administration. In vitro, DDC manifested selective uptake and accumulation within apoptotic cells that was highly correlated with Annexin-V binding, changes in mitochondrial membrane potential, and caspase activation. Uptake was not ATP-dependent, and was inducible by calcium mobilization. In vivo, DDC selectively targeted cells undergoing cell-death in melanoma tumors, while not binding to viable tumor cells. Chemotherapy caused marked tumor cell-death, evidenced by increased DDC uptake, which occurred before a detectable change in tumor size and was associated with increased animal survival. These data confirm the usefulness of imaging of cell-death by DDC as a tool for early monitoring of tumor response to anti-cancer therapy.

Simultaneous liquid chromatography determination of polyamines and arylalkyl monoamines.

The diamines putrescine (PUT) and diaminopropane (DAP), the polyamines spermidine (SPD) and spermine (SPM), and the arylalkyl amines phenethylamine (PEA), tyramine (TYR), dopamine (DA), and salsolinol (SAL) were dansylated and baseline separated by LC using a Waters ODS-2 column. The dansyl derivatives were detected by fluorescence (lambda(ex): 337 nm; lambda(em): 520 nm). Besides the amine function, the phenolic OH groups of TYR, DA, and SAL were also dansylated (LC-MS, formation of N,O-didansyl [TYR] and N,O,O'-tridansyl derivatives [DA and SAL]). Calibration curves revealed response factors being appreciably lower for (N,O-didansyl) aminophenol TYR and (N,O,O'-tridansyl) DA and SAL than for N-dansylamines. However, the method is suitable as a cheap alternative to LC-MS for the simultaneous determination of polyamines and arylalkyl amines of large quantities of samples.