Alien species water hyacinth realizes waste into treasure: The preparation of biomass sorbent to determine benzoylurea insecticides in tea products.

A fast and effective analytical method with biomass solid-phase microextraction sorbent combined with a high-performance liquid chromatography-ultraviolet detector was proposed for the determination of benzoylurea (BU) insecticides in tea products. The novel sorbent was prepared by activating and then carbonizing water hyacinth with a fast growth rate and low application value as raw material and showed a high specific surface area and multiple interactions with analytes, such as electrostatic action, hydrogen bonding, and π-π conjugation. After optimizing the three most important extraction parameters (pH [X1], sample loading rate [X2], and solution volume [X3]) by Box-Behnken design, the as-established analytical method showed good extraction performance: excellent recovery (80.13%-106.66%) and wide linear range (1-400 µg/L) with a determination coefficient of 0.9992-0.9999, a low limit of detection of 0.02-0.1 µg/L and the satisfactory practical application results in tea products. All these indicate that the water hyacinth-derived material has the potential as a solid-phase extraction sorbent for the detection and removal of BU insecticides from tea products, and at the same time, it can also achieve the effect of rational use of biological resources, maintaining ecological balance, turning waste into treasure, and achieving industrial production.

In situ formation of solidified supramolecular solvent based dispersive liquid-liquid microextraction for the enrichment of phenylurea herbicides in water, fruit juice, and milk.

A convenient, efficient, and green dispersive liquid-liquid microextraction based on the in situ formation of solidified supramolecular solvents combined with high performance liquid chromatography was developed for the determination of four phenylurea herbicides in liquid samples, including monuron, monolinuron, isoproturon, and chlortoluron. Herein, a novel supramolecular solvent was prepared by the in situ reaction of [P4448]Br and NH4PF6, which had the advantages of low melting point, high density, and good dispersibility. In addition, the microscopic morphology and physical properties of supramolecular solvent were characterized, and the extraction conditions were optimized. The results showed that the analytes had good linearity (R2 > 0.9998) within the linear range. The limits of detection and quantification for the four phenylurea herbicides were in the range of 0.13-0.19 µg L-1 and 0.45-0.65 µg L-1, respectively. The prepared supramolecular solvent is suitable for the efficient extraction of phenylurea herbicides in water, fruit juice, and milk.

A core-shell structured magnetic covalent organic framework as a magnetic solid-phase extraction adsorbent for phenylurea herbicides.

In this work, a core-shell structured magnetic covalent organic framework named as M-TpDAB was constructed with 3,3'-diaminobenzidine (DAB) and 1,3,5-triformylphloroglucinol (Tp) as building units. M-TpDAB was characterized by infrared spectroscopy, nitrogen adsorption-desorption isotherms, powder X-ray diffraction, scanning electron microscopy and transmission electron microscopy. Using the M-TpDAB as adsorbent, a simple and highly effective method was proposed for preconcentrating phenylurea herbicides before high performance liquid-phase chromatography analysis. In the optimized conditions, a good linearity was achieved within the range of 0.15-100 ng mL-1 for water sample, 1.0-100.0 ng mL-1 for tea drink samples. The limits of detection for the analytes were 0.05-0.15 ng mL-1 for water sample and 0.30-0.50 ng mL-1 for drink samples. Satisfactory recoveries of spiked target compounds were in the range of 84.6%-105% for water sample and 80.3%-102% for tea drink samples. Finally, the M-TpDAB based method was successfully used to determine phenylurea herbicides in tea drinks and water samples, demonstrating a good alternative for analyzing trace level of phenylurea herbicides in water samples.

In-syringe temperature-controlled liquid-liquid microextraction based on solidified floating ionic liquid for the simultaneous determination of triazine and phenylurea pesticide in vegetable protein drinks.

A novel in-syringe temperature-controlled liquid-liquid microextraction based on solidified floating ionic liquid (in-syringe TC-LLME-SFIL) combined with high performance liquid chromatography was developed for the simultaneous determination of monuron, chlorotoluron, atrazine, monolinuron, propazine and prometryn in commercial vegetable protein drinks. The samples were deproteinized by trichloroacetic acid and further cleaned up by solid phase extraction column. The ionic liquid tributyldodecylphosphonium tetrafluoroborate ([P4 4 4 12]BF4) was used as extraction solvent and dispersed into the depurated sample solution to form fine droplets with the assistance of heating and vortex. With the help of an ice bath, the ionic liquid phase solidified and floated on the surface of aqueous phase. After separation from the aqueous phase, the solidified ionic liquids were dissolved with acetonitrile and the resulting solution was analyzed by high performance liquid chromatography. Some extraction parameters, including type and amount of adsorbent, type and amount of ionic liquids, amount of NaCl, melting temperature and time of ionic liquid, vortex time, pH of sample solution, ice bath temperature and time, were investigated and optimized by single-factor experiment, Plackett-Burman design and Box-Behnken design. The results showed that good linearities (r ≥ 0.9994) were obtained in the concentration range of 7.8-1000.0 µg/L. The limits of detection and quantification were in the range of 0.25-2.59 µg/L and 0.82-8.63 µg/L, respectively. The spiked recoveries were 81.26-118.42% with the relative standard deviation (RSD, n = 3) lower than 8.17%. The present method was successfully applied to the simultaneous determination of triazine and phenylurea herbicides in vegetable protein drinks.

Facile construction of magnetic azobenzene-based framework materials for enrichment and sensitive determination of phenylurea herbicides.

Exploring new material as adsorbent for the efficient enrichment of pollutants is always of great significance in analytical chemistry. In this work, a magnetic azobenzene framework (labeled as MAzo) was constructed as a magnetic solid phase extraction (MSPE) adsorbent by a simple and environmentally benign strategy. The MAzo exhibited the attractive features of strong magnetism, outstanding adsorption performance, as well as good reusability. Combining MAzo-based MSPE with high performance liquid-phase chromatography, a simple and effective method was developed for simultaneous determination of four phenylurea herbicides in pear juice and apple juice samples. Under optimized experimental conditions, the method offered low limits of detection of 0.05-0.15 ng mL-1, high recoveries of 86.7-109.2% with RSD less than 7%. Density functional theory calculation indicated that the good adsorption performance of MAzo for PUHs can be ascribed to the strong H-bonding forces and weak π-π interactions. The facile, green, low-cost synthesis method together with the excellent adsorption performance endows the MAzo great application prospect in sample preparation.

Imidazolium ionic-liquid-modified phenolic resin for solid-phase extraction of thidiazuron and forchlorfenuron from cucumbers.

An imidazolium ionic-liquid-modified phenolic resin (ILPR) was synthesized using 3-aminophenol as a functional monomer, glyoxylic acid as a green cross-linker, and polyethylene glycol 6000 as a porogen. The obtained ILPR showed better extraction of benzoylurea plant hormones thidiazuron and forchlorfenuron than the unmodified phenolic resin because the imidazolium IL provides more interaction modes with the analytes. ILPR, as a tailored adsorbent for solid-phase extraction, was coupled with high-performance liquid chromatography (ILPR‒SPE‒HPLC) for the simultaneous determination of thidiazuron and forchlorfenuron in cucumbers. Good linearity of the ILPR‒SPE‒HPLC method was obtained, ranging from 0.0100 to 5.00 µg g-1 with a correlation coefficient (r) ≥ 0.9999. The recoveries of spiked samples ranged from 91.4% to 100.7% with a relative standard deviation of ≤ 6.0%.

Facile synthesis of conjugated microporous polymer with spherical structure for solid phase extraction of phenyl urea herbicides.

A carbazolic conjugated microporous polymer (designated as CZ-CMP) was successfully synthesized through Scholl reaction of carbazole with 1, 3, 5-triphenylbenzene. The CZ-CMP was characterized by FT-IR spectrum, X-ray diffraction, nitrogen sorption isotherms, and scanning electron microscopy. The characterization results showed that the CZ-CMP had a spherical structure with high surface area and good microporosity. Its adsorption performance was investigated by applying it as an adsorbent for the solid phase extraction (SPE) of phenyl urea herbicides (PUHs) (metoxuron, chlortoluron, isoproturon, monolinuron and buturon) from tea drinks samples prior to high performance liquid chromatographic detection. The CZ-CMP displayed high extraction efficiency for the PUHs, and the primary factors affecting the SPE efficiency including the type and volume of the eluent, sample solution pH, sample loading rate and sample volume were optimized. Under the optimized conditions, a good linear response for the analytes was observed in the range of 0.10-80.0 ng mL-1 with correlation coefficients (r) from 0.9937 to 0.9997. The limits of detection were measured to be in the range of 0.02-0.30 ng mL-1 and the limits of quantitation were in the range of 0.06-0.9 ng mL-1. The developed method was successfully applied for the determination of the five PUHs in four different kinds of drinks with the method recoveries between 83.7% and 118% and the relative standard deviations between 1.0% and 10%. Besides, the application potential of the CZ-CMP was evaluated by using it to extract different types of the organic compounds including some phthalate eaters (PAEs), chlorophenol (CPs), nitroimidazoles and polycyclic aromatic hydrocarbons (PAHs). The results indicated that the CZ-CMP had strong adsorption ability for the compounds with more hydrogen bonding sites and moderate hydrophobicity.

An effective configuration for automated magnetic micro solid-phase extraction of phenylurea herbicides from water samples followed by high-performance liquid chromatography.

In this study, a new automated magnetic micro solid-phase extraction was introduced. A Tygon tube was folded and fixed around the pole of a cylindrical magnet. Nanosized magnetic sorbents modified with diphenyldichlorosilane were uniformly immobilized on one side of the inner wall of the tube. Sample solution and desorption solvent were passed through the tube using a peristaltic pump. Four phenylurea herbicides (tebuthiuron, monolinuron, isoproturon, and monuron) were used as the model compounds to evaluate the method performance. HPLC-UV was used to separate and quantify the analytes. The effective parameters influencing the performance of the extraction process (i.e., extraction and desorption flow rates, eluent and sample volumes, type of eluent and sample ionic strength) were investigated. The limit of detection was 0.04 µg L-1 for all studied compounds. Calibration curves were linear in the range of 0.1-500 µg L-1 with a determination coefficient between 0.9988 and 0.9999. Intra-day, inter-day and batch-to-batch precisions expressed as relative standard deviation were less than 7%. Several environmental water samples were investigated to assess the applicability of the method for real sample analysis.

Magnetic 3D hierarchical Ni/NiO@C nanorods derived from metal-organic frameworks for extraction of benzoylurea insecticides prior to HPLC-UV analysis.

Magnetic hierarchical nickel/nickel oxide/carbon nanorods (Ni/NiO@C) were prepared via the pyrolysis of a metal-organic framework containing nickel(II) nickel (Ni-MOF; Ni3(BTC)2) under argon atmosphere. In this material, magnetic Ni/NiO@C nanoparticles are embedded in porous carbon nanorods, and the morphology is similar to that of the original Ni-MOF precursor. The synthesized nanorods were applied as magnetic sorbents in the solid-phase extraction of five benzoylurea insecticides (flufenoxuron, chlorbenzuron, teflubenzuron, diflubenzuron and triflumuron), and their performance was evaluated under optimized conditions. The results show that the material exhibits high extraction recoveries from spiked samples (82.9%-107.6%) and linear response in the range of 0.2-450 µg·L-1. It is also characterized by relatively low limits of detection (50-100 ng·mL-1) at a signal-to-noise ratio of 3. The sorbent is chemically stable and can be repeatedly recycled, with little decline in extraction capacity after 20 cycles of reuse. The method was successfully applied to the quantification of benzoylureas in tea, wolfberry, millet, and oat samples, and it showed high extraction efficiency. Graphical abstractSchematic representation of the synthesis of magnetic hierarchical nickel/nickel oxide/carbon nanorods derived from Ni-MOF. The material is employed as a sorbent for the magnetic solid-phase extraction of benzoylurea insecticides.

Influence of photo-initiators in the preparation of methacrylate monoliths into poly(ethylene-co-tetrafluoroethylene) tubing for microbore HPLC.

In this study, poly(butyl methacrylate-co-ethyleneglycol dimethacrylate) polymeric monoliths were in situ developed within 0.75 mm i.d. poly(ethylene-co-tetrafluoroethylene) (ETFE) tubing by UV polymerization via three different free-radical initiators (α,α'-azobisisobutyronitrile (AIBN), 2,2-dimethoxy-2-phenylacetophenone (DMPA) and 2-methyl-4'-(methylthio)-2-morpholinopropiophenone (MTMPP). The influence of the nature of each photo-initiator and irradiation time on the morphological features of the polymer was investigated by scanning electron microscopy, and the chromatographic properties of the resulting microbore columns were evaluated using alkyl benzenes as test substances. The beds photo-initiated with MTMPP gave the best performance (minimum plate heights of 38 µm for alkyl benzenes) and exhibited a satisfactory reproducibility in the chromatographic parameters (RSD < 11%). These monolithic columns were also successfully applied to the separation of phenylurea herbicides, proteins and a tryptic digest of ß-casein.

Determination of Isoproturon in Environmental Samples using the QuEChERS Extraction-Spectrofluorimetric Method.

An accurate and sensitive method has been developed for determination of the herbicide isoproturon using the Quick Easy Cheap Effective Rugged Safe (QuEChERS) extraction-spectrofluorimetric technique. The method involves the reaction of 2-cyanoacetamide with isoproturon in basic medium (NH3 ; 15 mol/L). The resulting fluorescent product was found to show maximum emission at 378 nm and maximum excitation at 333 nm. Fluorescence intensity under the influence of different parameters was investigated. The linear range of analyte concentrations was found to be 0.5 to 15 µg/mL, with a limit of detection of 0.144 µg/mL, a limit of quantification of 0.437 µg/mL (signal to noise ratio = 3), and a regression coefficient of 0.9991, under optimized conditions. The proposed method was effectively applied for determination of isoproturon in different matrices; the percentage of recovery varied from 85.00 ± 1.2% to 96.00 ± 0.5%. The method was also applied for residue analysis of isoproturon in real soil samples collected from a pilot field. For extraction of isoproturon, the QuEChERS extraction approach was used, and the average residue in the soil samples was found to be 0.81 ± 0.07 µg/g. To show the potential of this approach, our results were compared with those of other methods reported in the literature. Environ Toxicol Chem 2019;38:2614-2620. © 2019 SETAC.

Magnetic solid-phase extraction of benzoylurea insecticides in tea samples with Fe3 O4 -hyperbranched polyester magnetic composite as sorbent.

In this work, a method for the analysis of benzoylurea insecticides, including hexaflumuron, flufenoxuron, lufenuron and chlorfluazuron, in tea samples by high-performance liquid chromatography with Fe3 O4 -hyperbranched polyester nanocomposite as the adsorbent for magnetic solid-phase extraction was developed. The magnetic nanocomposite was prepared and characterized by infrared spectroscopy, vibrating sample magnetometry, and scanning electron microscopy. The as-prepared nanocomposite was used as a sorbent for the extraction and preconcentration of pesticide residues in tea samples. The extraction and desorption conditions, including mass ratios of raw materials, amount of sorbent, pH value, extraction time, and desorption time, were investigated. Under the final conditions chosen for the analysis, good linearity was obtained for all the tested compounds, with R2 values of at least 0.9979. The limits of detection were determined in the range of 0.15-0.3 µg/L. The recovery obtained from the analysis of tea samples with various spiked concentrations was between 90.7 and 98.4%, with relative standard deviations (n = 4) lower than 4.1%. Furthermore, the present approach was successfully applied to the quantitative determination of residues of benzoylurea insecticides in real samples.

Lifecycle modelling systems support inosine monophosphate dehydrogenase (IMPDH) as a pro-viral factor and antiviral target for New World arenaviruses.

Infection with Junín virus (JUNV) is currently being effectively managed in the endemic region using a combination of targeted vaccination and plasma therapy. However, the long-term sustainability of plasma therapy is unclear and similar resources are not available for other New World arenaviruses. As a result, there has been renewed interest regarding the potential of drug-based therapies. To facilitate work on this issue, we present the establishment and subsequent optimization of a JUNV minigenome system to a degree suitable for high-throughput miniaturization, thereby providing a screening platform focused solely on factors affecting RNA synthesis. Using this tool, we conducted a limited drug library screen and identified AVN-944, a non-competitive inosine monophosphate dehydrogenase (IMPDH) inhibitor, as an inhibitor of arenavirus RNA synthesis. We further developed a transcription and replication competent virus-like particle (trVLP) system based on these minigenomes and used it to screen siRNAs against IMPDH, verifying its role in supporting arenavirus RNA synthesis. The antiviral effect of AVN-944, as well as siRNA inhibition, on JUNV RNA synthesis supports that, despite playing only a minor role in the activity of ribavirin, exclusive IMPDH inhibitors may indeed have significant therapeutic potential for use against New World arenaviruses. Finally, we confirmed that AVN-944 is also active against arenavirus infection in cell culture, supporting the suitability of arenavirus lifecycle modelling systems as tools for the screening and identification, as well as the mechanistic characterization, of novel antiviral compounds.

Enhanced and Complete Removal of Phenylurea Herbicides by Combinational Transgenic Plant-Microbe Remediation.

The synergistic relationships between plants and their rhizospheric microbes can be used to develop a combinational bioremediation method, overcoming the constraints of individual phytoremediation or a bioaugmentation method. Here, we provide a combinational transgenic plant-microbe remediation system for a more efficient removal of phenylurea herbicides (PHs) from contaminated sites. The transgenic Arabidopsis thaliana plant synthesizing the bacterial N-demethylase PdmAB in the chloroplast was developed. The constructed transgenic Arabidopsis plant exhibited significant tolerance to isoproturon (IPU), a typical PH, and it took up the IPU through the roots and transported it to leaves, where the majority of the IPU was demethylated to 3-(4-isopropylphenyl)-1-methylurea (MDIPU). The produced intermediate was released outside the roots and further metabolized by the combinationally inoculated MDIPU-mineralizing bacterium Sphingobium sp. strain 1017-1 in the rhizosphere, resulting in an enhanced and complete removal of IPU from soil. Mutual benefits were built for both the transgenic Arabidopsis plant and strain 1017-1. The transgenic Arabidopsis plant offered strain 1017-1 a suitable accommodation, and in return, strain 1017-1 protected the plant from the phytotoxicity of MDIPU. The biomass of the transgenic Arabidopsis plant and the residence of the inoculated degrading microbes in the combinational treatment increased significantly compared to those in their respective individual transgenic plant treatment or bioaugmentation treatment. The influence of the structure of bacterial community by combinational treatment was between that of the two individual treatments. Overall, the combination of two approaches, phytoremediation by transgenic plants and bioaugmentation with intermediate-mineralizing microbes in the rhizosphere, represents an innovative strategy for the enhanced and complete remediation of pollutant-contaminated sites.IMPORTANCE Phytoremediation of organic pollutant-contaminated sites using transgenic plants expressing bacterial enzyme has been well described. The major constraint of transgenic plants transferred with a single catabolic gene is that they can also accumulate/release intermediates, still causing phytotoxicity or additional environmental problems. On the other hand, bioaugmentation with degrading strains also has its drawbacks, including the instability of the inoculated strains and low bioavailability of pollutants. In this study, the synergistic relationship between a transgenic Arabidopsis plant expressing the bacterial N-demethylase PdmAB in the chloroplast and the inoculated intermediate-mineralizing bacterium Sphingobium sp. strain 1017-1 in the rhizosphere is used to develop an intriguing bioremediation method. The combinational transgenic plant-microbe remediation system shows a more efficient and complete removal of phenylurea herbicides from contaminated sites and can overcome the constraints of individual phytoremediation or bioaugmentation methods.

Mechanochemical synthesis of covalent organic framework for the efficient extraction of benzoylurea insecticides.

A covalent organic framework named TpAzo was successfully fabricated by a simple and environmentally friendly mechanochemical grinding method based on the Schiff base aldehyde-amine condensation reaction between 1,3,5-triformylphloroglucinol (Tp) and 4,4'-azodianiline (Azo), with p-toluene sulphonic acid as a molecular organizer. The TpAzo was characterized by scanning electron microscopy, transmission electron microscopy, powder X-ray diffraction, nitrogen adsorption-desorption isotherms, and thermogravimetric analysis. The TpAzo possessed a sheet-like morphology, rich porosity and high thermal stability. The extraction performance of the TpAzo was investigated by using it as the solid phase extraction adsorbent for the extraction of benzoylurea insecticides (BUs) from juice, tomato and white radish samples prior to high performance liquid chromatographic analysis. Under the optimal conditions, a good linearity for the BUs existed in the range of 1.0-160.0 ng mL-1 for juice sample and 0.5-80.0 ng g-1 for tomato and white radish samples with the correlation coefficients of 0.9956-0.9999. The limits of detection for the analytes were 0.1-0.2 ng mL-1 for juice sample and 0.05-0.1 ng g-1 for tomato and white radish samples. The method recoveries for the analytes fell in the range of 84.1%-108.6%. The adsorption mechanism of the TpAzo was investigated by using it to extract different types of organic compounds, including phthalates, phenylurea herbicides and carbamate insecticides. The results showed that the π-stacking and hydrophobic interactions between the TpAzo and the analytes played an important role for the adsorption.

Residue investigation of some phenylureas and tebuthiuron herbicides in vegetables by ultra-performance liquid chromatography coupled with integrated selective accelerated solvent extraction-clean up in situ.

BACKGROUND: Some trace amounts of urea herbicide residues can be transferred to humans via the food chain, thereby being potentially harmful to human health. The development of a robust analytical methodology for effective sample preparation and simultaneous determination of herbicide residues in vegetable samples is required for achieving food safety. RESULTS: The diuron-molecularly imprinted polymers (MIPs) synthesized have excellent affinity and high selectivity to phenylureas (monolinuron, isoproturon, diuron and linuron) and tebuthiuron. A novel automated procedure with better selectivity for vegetable sample treatment was developed by integrated matrix solid-phase dispersion-accelerated solvent extraction clean-up in situ. Five herbicides can be baseline separated with runtime down to 5 min by ultra-performance liquid chromatography, and good linearity was obtained with a correlation coefficient (r) of 0.9999. The limit of quantification of the method was in the range of 0.8-2.3 µg kg-1 . Diuron residue in cherry tomato sample was found to be 40 µg kg-1 . CONCLUSION: The developed method has satisfactory selectivity, good linearity, high sensitivity and accuracy as well as speediness, and can ensure rapid selective extraction and sensitive multi-residue analysis at low microgram per kilogram levels of the herbicides in vegetable food. © 2018 Society of Chemical Industry.

A Rapid Dialysis Method for Analysis of Artificial Sweeteners in Foods (2nd Report).

Following the previous report, a rapid dialysis method was developed for the extraction and purification of four artificial sweeteners, namely, sodium saccharide (Sa), acesulfame potassium (AK), aspartame (APM), and dulcin (Du), which are present in various foods. The method was evaluated by the addition of 0.02 g/kg of these sweeteners to a cookie sample, in the same manner as in the previous report. Revisions from the previous method were: reduction of the total dialysis volume from 200 to 100 mL, change of tube length from 55 to 50 cm, change of dialysate from 0.01 mol/L hydrochloric aqueous solution containing 10% sodium chloride to 30% methanol solution, and change of dialysis conditions from ambient temperature with occasional shaking to 50℃ with shaking at 160 rpm. As a result of these revisions, the recovery reached 99.3-103.8% with one hour dialysis. The obtained recovery yields were comparable to the recovery yields in the previous method with four hour dialysis.

Three new alkaloids from the seeds of Nigella glandulifera.

Three new alkaloids namely 8-(4-hydroxyphenyl)-6-methoxy-3,4-dihydroisoquinolin-1(2H)-one (1), 4-aminonigellidine (2), and N-[(4-hydroxy-2-isopropyl-5-methyl)]phenylurea (3), along with six known ones (4-9), were isolated from the seeds of Nigella glandulifera. The structures of 1-3 were determined through spectroscopic analyses (HRESIMS, 1D/2D NMR). Compound 1 was a rare isoquinolinone alkaloid with phenyl substituted at C-8.

In-syringe dispersive liquid-liquid microextraction based on the solidification of ionic liquids for the determination of benzoylurea insecticides in water and tea beverage samples.

A novel in-syringe dispersive liquid-liquid microextraction based on the solidification of ionic liquids (in-syringe SIL-DLLME) was coupled with high-performance liquid chromatography-ultraviolet detector (HPLC-UVD) to detect five benzoylurea insecticides (BUs) in water and tea beverage samples. In this method, the hydrophobic ionic liquid [N8881][PF6] was formed in situ by the metathesis reaction between [N8881]Cl and the anion-exchange reagent KPF6 to extract the target analytes. The whole extraction procedure was performed in a syringe. The solidified extractant could be separated from the aqueous phase by exposing the emulsified extraction solution to an ice bath and then easily collected by squeezing out the aqueous phase through the prepared NWPP-based needle. Various parameters affecting the extraction efficiency, such as the amount of [N8881]Cl, the molar ratio of [N8881]Cl to KPF6, salt addition, cooling time, solution temperature, sample pH and sample volume, were evaluated. Under the optimized conditions, the proposed method was validated with satisfactory results: good linearities with coefficients of determination greater than 0.99 were obtained in the range of 2-500µgL-1; the limits of detection varied between 0.29 and 0.59µgL-1; the recoveries of the five benzoylurea insecticides ranged from 85.93% to 90.52%; and the intra-day (n=3) and inter-day (n=3) relative standard deviations were less than 5.36%. Finally, the proposed method was successfully used for the determination of BUs in real water and tea beverage samples.

Graphene oxide framework: An adsorbent for solid phase extraction of phenylurea herbicides from water and celery samples.

1,4-Phenyldiboronic acid (1,4-PDBA) linked graphene oxide framework (GOF) was prepared via an one-step, catalyst-free and hydrothermal route. To evaluate its adsorption performance, the prepared GOF was served as an adsorbent for solid phase extraction of phenylurea herbicides (PUHs) from water and celery samples prior to their determination by high performance liquid chromatography. The results indicated that GOF exhibited excellent adsorption capacity for the target PUHs. Under the optimum conditions, the method showed high recoveries ranged from 86.0% to 112.0%, low relative standard deviations (<5.4%) and low limits of detection ranged from 0.01 to 0.02ngmL-1 for water and 0.025-0.050ngg-1 for celery sample, respectively. These results indicated the great application potential of GOF in the enrichment of organic pollutants from different matrix samples.