Temperature abetted synthesis of novel magnesium stannate nanoparticles assisted for nanomolar level detection of hazardous flavonoid in biological samples.

Fabrication of temperature-influenced nanoparticles over the superficial region of glassy carbon electrode (GCE) stimulates the electrocatalytic activity owing to their morphology, defective sites, and higher active surface area, etc. In this regard, we have fabricated annealed magnesium stannate nanoparticles (Mg2SnO4 NPs) on GCE for nanomolar level detection of hazardous flavoring and pharmaceutical compound Rutin (RT). To analyze the impact of temperature, we have compared annealed Mg2SnO4 NPs with unannealed magnesium stannate hydrate (MgSnO3·3H2O) particles. The physicochemical properties of synthesized materials were characterized with different microscopic and spectroscopic techniques. From these studies, annealed Mg2SnO4 NPs formed purely without any flith and existence of water molecules as compared to unannealed MgSnO3·3H2O. Moreover as fabricated, Mg2SnO4 NPs/GCE outcomes with higher redox behavior compared to other electrodes in presence of RT at optimized working buffer (pH = 7.0). Interestingly, the electrode successfully established a dual wider linear response (0.062-34.8 & 34.8-346.8 µM) with a nanomolar detection limit (1 nM) and higher sensitivity. The practicability analysis of the proposed sensor also affords excellent selectivity, reproducibility, repeatability, reversibility, and storage stability. Furthermore, the real sample analysis was carried out in blood and orange samples fallout with better recovery results.

Comparative analysis of the Magnesium Ferrite (MgFe2O4) nanoparticles synthesised by three different routes.

The toxicity of arsenic in drinking water is hazardous for human health. Different strategies are used for arsenic removal from drinking water. Nanoparticles with higher adsorption capacities are useful for arsenic remediation. In the current study, magnesium ferrite nanoparticles were synthesised by three different methods followed by their characterisation XRD, SEM, and EDX. The SEM morphology and the porosity of magnesium ferrite nanoparticles were best in case of auto-combustion method. These particles had an average particle size of about 20-50 nm with spherical shape. These particles showed efficient remediation of arsenic up to 96% within 0.5 h. However, the co-precipitation and sol-gel-based nanoparticles showed arsenic remediation upto85 and 87% at 0.5-h time point. Moreover, the minimum inhibitory concentration of nanoparticles against two strains E.coli and Pseudomonas aeruginosa was found to be4.0 mg/L of these nanoparticles. However, the sol-gel-based nanoparticles showed efficient anti-microbial activity against E.coli at 4.0 and 8.0 mg/L against Pseudomonas aeruginosa. The co-precipitation-based nanoparticles were least efficient both for arsenic remediation and anti-microbial purposes. Thus, the synthesised auto-combustion-based nanoparticles are multifunctional in nature.

Mechanochemical Synthesis of CuO/MgAl2O4 and MgFe2O4 Spinels for Vanillin Production from Isoeugenol and Vanillyl Alcohol.

CuO/MgAl2O4 and CuO/MgFe2O4 catalysts were successfully synthesized with the use of spinel supports by a very simple and low-cost mechanochemical method. High-speed ball-milling was used to synthesize these catalyst supports for the first time. Materials were subsequently characterized by using XRD, FESEM, TEM, EDS-Dot mapping, XPS, BET-BJH, and Magnetic Susceptibility to investigate the physical-chemical characteristics of the catalysts. Acidity evaluation results indicated that the catalyst with the Mg-Al spinel support had more acid sites. XRD results showed a successful synthesis of the catalysts with large crystal sizes. Both catalysts were used in isoeugenol oxidation and vanillyl alcohol to vanillin reactions, with the CuO/MgAl2O4 showing optimum results. This catalyst provided 67% conversion (74% selectivity) after 2 h and this value improved to 81% (selectivity 100%) with the second reaction after 8 h. The CuO/MgFe2O4 catalyst in the first reaction after five hours revealed 53% conversion (47% selectivity) and after eight hours with the second reaction, the conversion value improved to 64% (100% selectivity). In terms of reusability, CuO/MgAl2O4 showed better results than the CuO/MgFe2O4 catalyst, for both reactions.

Oxidative Dehydrogenation of Ethanol over Vanadium- and Molybdenum-modified Mg-Al Mixed Oxide Derived from Hydrotalcite.

Hydrotalcite or Mg-Al LDHs were synthesized by co-precipitation method. The Mg-Al mixed oxide was then derived by calcination of hydrotalcite at 450°C. The metal modified catalysts (Mo/Mg-Al and V/Mg-Al) were prepared by incipient wetness impregnation method. The obtained catalysts were characterized by several useful techniques and tested the reactivity for dehydrogenation and oxidative dehydrogenation of ethanol (gas-phase) to produce acetaldehyde. The catalytic reactions were performed at temperature range from 200 to 400°C for both non-oxidative and oxidative atmospheres. The results showed that the vanadium-modified hydrotalcite (V/Mg-Al) exhibited the highest ethanol conversion (34.3%) and acetaldehyde yield (15.5%) at 400℃ in the non-oxidative atmosphere. For the oxidative dehydrogenation of ethanol, the V/Mg-Al catalyst showed the highest activity at 400°C giving the ethanol conversion and acetaldehyde yield of 73.7% and 29.5%, respectively. This result probably related to the highest base density of V/Mg-Al catalyst (6.13 µmol CO2/m2) measured by CO2-TPD. The catalytic activity of Mg-Al catalyst and metal modified catalyst slightly decreased upon time-on-stream test for 10 h on oxidative dehydrogenation of ethanol due to carbon deposition.

Study on MgxSr3-x(PO4)2 bioceramics as potential bone grafts.

Magnesium (Mg) and strontium (Sr), which are essential nutrient elements in the natural bone, positively affect the osteogenic activity even in wide ranges of ion concentrations. However, it remains unknown whether magnesium-strontium phosphates [MgxSr3-x(PO4)2] are potential bone grafts for accelerating bone regeneration. Herein, a serial of MgxSr3-x(PO4)2, including Mg3(PO4)2, Mg2Sr(PO4)2, Mg1.5Sr1.5(PO4)2, MgSr2(PO4)2 and Sr3(PO4)2, were synthesized using a solid-state reaction approach. The physicochemical properties and cell behaviors of MgxSr3-x(PO4)2 bioceramics were characterized and compared with the common bone graft ß-tricalcium phosphate (ß-TCP). The results indicated that various MgxSr3-x(PO4)2 bioceramics differed in compressive strength and in vitro degradation rate. All the MgxSr3-x(PO4)2 bioceramics had excellent biocompatibility. In contrast to ß-TCP, the MgxSr3-x(PO4)2 enhanced alkaline phosphatase activity of mouse bone mesenchymal stem cells (mBMSCs), and inhibited osteoclastogenesis-related gene expression of RAW264.7 cells, but did not enhance osteogenesis-related gene expression of mBMSCs which were treated with osteogenesis induction supplements. However, Mg3(PO4)2 stimulated osteogenesis-related gene expression of mBMSCs without the treatment of osteogenesis induction supplements. This work contributes to the design of bone graft and may open a new avenue for the bone regeneration field.

Ionic liquid-type surfactant modified attapulgite as a novel and efficient dispersive solid phase material for fast determination of pyrethroids in tea drinks.

In this study, a novel ionic liquid-type surfactant modified attapulgite named as 1-dodecyl-3-methylimidazolium bromide-attapulgite (C12MIM-ATP) is successfully prepared and applied in dispersive solid phase extraction (dSPE) for the fast determination of pyrethroid residues in tea drinks. The primary factors that influenced the extraction efficiency, including sorbent type, amount of sorbent, extraction time, desorption conditions, pH and ionic strength, are investigated. The optimized results reveal that the extraction and desorption equilibria are rapidly obtained within 1 min. Under the optimized conditions, good linearity (2-500 µg/L) is observed for four pyrethroids in tea drinks with determination coefficients (r2) ranged from 0.9992 to 1.0000. The limits of detection (LODs) are 0.6 µg/L for all pesticides. Acceptable extraction recoveries of target analytes are found from 90.28 to 107.56% with relative standard deviations (RSDs) less than 8.30% in real tea drink samples. The batch-to-bath repeatability is evaluated by recovery test on five independent synthesized C12MIM-ATP sorbents. Satisfactory batch-to-batch repeatability is obtained with the recovery factors varied in 15%. A small matrix effect is observed using C12MIM-ATP as the sorbent for detection pyrethroids in tea drinks.

Comparing the Effects of Chitosan Scaffolds Containing Various Divalent Metal Phosphates on Osteogenic Differentiation of Stem Cells from Human Exfoliated Deciduous Teeth.

Inducing the differentiation of stem cells from human exfoliated deciduous teeth (SHEDs) proceeds with low efficiency, which greatly limits clinical applications. Divalent metal elements play an important role in osteoinductivity for bone remodeling because they can simulate bone formation and decrease bone resorption. The purpose of this study was to investigate the effect of some divalent metal phosphates on osteogenic differentiation from human exfoliated deciduous teeth. These divalent metal ions can be gradually released from the scaffold into the culture medium and continually induce osteoblastic differentiation. Experimental results revealed that SHEDs cultured in chitosan scaffolds containing divalent metal phosphates had notably increased osteoblastic differentiation compared with cells cultured without divalent metal phosphates. This effect was due to the high activity of alkaline phosphatase, as well as the bone-related gene expression of collagen type I, Runx2, osteopontin, osteocalcin, VEGF, and Ang-1, shown through RT-PCR and bone-related protein immunocytochemistry stains. A calcium-content assay further revealed significant enhancement of deposited minerals on the scaffolds after 21 days of culture, particularly for magnesium phosphate and zinc phosphate. Thus, divalent metals, except for barium phosphate, effectively promoted SHED cell differentiation and osteoblastic cell maturation. This study demonstrated that the divalent metal elements magnesium, strontium, and zinc could effectively induce SHED osteoblastic differentiation for use in tissue engineering and bone repair.

Magnesium phosphate pentahydrate nanosheets: Microwave-hydrothermal rapid synthesis using creatine phosphate as an organic phosphorus source and application in protein adsorption.

Magnesium phosphate materials have aroused interest of researchers in recent years and are promising for biomedical applications due to their good biocompatibility and biodegradability. In this work, we report the microwave-hydrothermal rapid synthesis of magnesium phosphate pentahydrate nanosheets (MPHSs) using biocompatible creatine phosphate as an organic phosphorus source. This method is facile, rapid, surfactant-free and environmentally friendly. The as-prepared MPHSs have an obvious pH-dependent dissolution performance which can be used as an ideal pH-responsive nanocarrier for drug and gene delivery. Moreover, the MPHSs have a good cytocompatibility and a high ability to promote osteoblast MC-3T3 adhesion and spreading, as well as a relatively high protein adsorption ability using hemoglobin (Hb) as a model protein. Thus, the MPHSs are promising for the applications in biomedical fields such as protein adsorption and bone regeneration.

MgI2 -mediated chemoselective cleavage of protecting groups: an alternative to conventional deprotection methodologies.

The scope of MgI2 as a valuable tool for quantitative and mild chemoselective cleavage of protecting groups is described here. This novel synthetic approach expands the use of protecting groups, widens the concept of orthogonality in synthetic processes, and offers a facile opportunity to release compounds from solid supports.

Synthesis of boronic-acid-functionalized magnetic attapulgite for selective enrichment of nucleosides.

2,4-Difluoro-3-formyl-phenylboronic acid (DFFPBA)-modified magnetic attapulgite (ATP-Fe3O4-NH2-DFFPBA) was synthesized and employed to capture and enrich cis-diol-containing biomolecules. The resulting material exhibited a high saturation magnetization value of 20.71 emu/g, allowing the absorbent to be conveniently magnetically separated. Combining the Fe3O4 nanoparticles with the high specific surface area of attapulgite yielded a material with a high capture capacity (13.78 mg/g) for adenosine. Furthermore, ATP-Fe3O4-NH2-DFFPBA was found to possess remarkable selectivity for adenosine at a low molar ratio of adenosine/2-deoxyadenosine (1:500). The potential applications of this material were explored by using it to extract five nucleosides from urine samples, and the results demonstrate that it can decrease matrix interference and selectively enrich analytes.

A novel synthetic route for magnesium aluminate (MgAl2O4) nanoparticles using sol-gel auto combustion method and their photocatalytic properties.

In this paper a novel and inexpensive route for the preparation of spinel magnesium aluminate nanoparticles (MgAl2O4) is proposed. Magnesium aluminate photocatalyst was synthesized via sol-gel auto combustion method using oxalic acid, urea, and citric acid fuels at 350°C. Subsequently, the burnt samples were calcined at different temperatures. The pure spinel MgAl2O4 with average crystallite size 27.7, 14.6 and 15.65nm was obtained at 800°C calcinations using the aforementioned fuels, respectively. The obtained samples were characterized by powder X-ray diffraction, Fourier transform infrared, UV-Vis spectroscopy, transmission electron microscope, scanning electron microscope. The photo catalytic activity of MgAl2O4 product was studied by performing the decomposition of Reactive Red Me 4BL dye under UV illumination or sunlight irradiation. The dye considerably photocatalytically degraded by 90.0% and 95.45% under UV and sunlight irradiation, respectively, within ca. 5h with pseudo first order rate constants of 5.85×10(-3) and 8.38×10(-3)min(-1), respectively.

Effect of contact to the atmosphere and dilution on phosphorus recovery from human urine through struvite formation.

Phosphorus (P) in hydrolysed urine can be recovered through struvite formation. In the present study, batch experiments were conducted to investigate the effects of contact to the atmosphere (i.e. open and closed) and dilution [Vurine/(Vurine + Vwater)] (i.e. 100%, 50% and 25%) on P recovery from fresh urine through struvite formation with the addition of magnesium chloride (molar ratios of Mg/P = 1.3 and 2.0) after 32 d of storage. The P loss mainly occurred during the initial stages of precipitation with calcium and magnesium (5 d). The precipitates formed at the bottom of the jars were identified by X-ray diffraction to be struvite, hydroxyapatite and calcite. The results showed that the P recovery efficiency from urine solutions in open jars was lower than that in closed jars. It caused significant ammonia volatilization in open jars, resulting in higher nitrogen loss, lower pH values and lower supersaturation. The P recovery efficiency decreased with dilution, which is related to lower pH and lower supersaturation resulting from water dilution. An increase in the Mg/P ratio from 1.3 to 2.0 enhanced P recovery to some extent in urine solutions with different dilutions. The largest P recovery efficiency was 93.7% and 97.3% at an Mg/P ratio of 1.3 and 2.0 for the 100% urine solutions in closedjars, respectively. Scanning electron microscopy revealed smaller struvite particle sizes at lower dilutions (100% and 50% urine) compared with higher dilutions (25% urine).

Influence of fluoride treatment on surface properties, biodegradation and cytocompatibility of Mg-Nd-Zn-Zr alloy.

Fluoride treatment is a commonly used technique or pre-treatment to optimize the degradation kinetic and improve the biocompatibility of magnesium-based implant. The influence of changed surface properties and degradation kinetics on subsequent protein adsorption and cytocompatibility is critical to understand the biocompatibility of the implant. In this study, a patent magnesium alloy Mg-Nd-Zn-Zr alloy (JDBM) designed for cardiovascular stent application was treated by immersion in hydrofluoric acid. A 1.5 µm thick MgF2 layer was prepared. The surface roughness was increased slightly while the surface zeta potential was changed to a much more negative value after the treatment. Static contact angle test was performed, showing an increase in hydrophilicity and surface energy after the treatment. The MgF2 layer slowed down in vitro degradation rate, but lost the protection effect after 10 days. The treatment enhanced human albumin adsorption while no difference of human fibrinogen adsorption amount was observed. Direct cell adhesion test showed many more live HUVECs retained than bare magnesium alloy. Both treated and untreated JDBM showed no adverse effect on HUVEC viability and spreading morphology. The relationship between changed surface characteristics, degradation rate and protein adsorption, cytocompatibility was also discussed.

Geometric adaption of biodegradable magnesium alloy scaffolds to stabilise biological myocardial grafts. Part I.

Synthetic patch materials currently in use have major limitations, such as high susceptibility to infections and lack of contractility. Biological grafts are a novel approach to overcome these limitations, but do not always offer sufficient mechanical durability in early stages after implantation. Therefore, a stabilising structure based on resorbable magnesium alloys could support the biological graft until its physiologic remodelling. To prevent early breakage in vivo due to stress of non-determined forming, these scaffolds should be preformed according to the geometry of the targeted myocardial region. Thus, the left ventricular geometry of 28 patients was assessed via standard cardiac magnetic resonance imaging (MRI). The resulting data served as a basis for a finite element simulation (FEM). Calculated stresses and strains of flat and preformed scaffolds were evaluated. Afterwards, the structures were manufactured by abrasive waterjet cutting and preformed according to the MRI data. Finally, the mechanical durability of the preformed and flat structures was compared in an in vitro test rig. The FEM predicted higher durability of the preformed scaffolds, which was proven in the in vitro test. In conclusion, preformed scaffolds provide extended durability and will facilitate more widespread use of regenerative biological grafts for surgical left ventricular reconstruction.

Effects of three kinds of organic acids on phosphorus recovery by magnesium ammonium phosphate (MAP) crystallization from synthetic swine wastewater.

P recovery from swine wastewater has become a great concern as a result of the high demand for P resources and its potential eutrophication effects on water ecosystems. The method of magnesium ammonium phosphate (MAP) crystallization was used to recover P from simulated swine wastewater, and the effects of three organic acids (citric acid, succinic acid and acetic acid) on P removal efficiency and rate at different pH values were investigated. The results indicated that the P removal efficiency was worst affected by citric acid in the optimal pH range of 9.0-10.5, followed by succinic acid and acetic acid, and the influencing extent of organic acids decreased with the increasing pH value. Due to the complexation between organic acid and Mg(2+)/NH4(+), all of three organic acids could inhibit the P removal rate at the beginning of the reaction, which showed positive correlation between the inhibition effects and the concentration of organic acids. The high concentration of citric acid could completely suppress the MAP crystallization reaction. Moreover, citric acid and succinic acid brought obvious effects on the morphology of the crystallized products. The experimental results also demonstrated that MAP crystals could be obtained in the presence of different kinds and concentrations of organic acids.

Influence of process parameters on phosphorus recovery by struvite formation from urine.

Batch experiments were conducted to examine the influence of various process parameters on phosphorus (P) recovery by struvite formation from urine. The results showed that the Mg/P molar ratio is one of the most important parameters affecting P recovery. The Mg/P molar ratio of 1.3 was found the most reasonable for struvite formation, and the P removal efficiency reached more than 96.6%. An increase in pH of urine solutions from 8.7 to 10.0 did not significantly affect P removal, but the quality of crystal formed at pH 10.0 was poor based on scanning electron microscopy analysis. A longer mixing time positively affected struvite formation, and compared to without mixing, the P removal efficiency increased from 72.7 to 97.3% after 5 min of mixing. The addition of seed material had no influence on the P removal efficiency, but contributed to the formation of struvite clusters.

Microwave assisted preparation of magnesium phosphate cement (MPC) for orthopedic applications: a novel solution to the exothermicity problem.

There are two interesting features of this paper. First, we report herein a novel microwave assisted technique to prepare phosphate based orthopedic cements, which do not generate any exothermicity during setting. The exothermic reactions during the setting of phosphate cements can cause tissue damage during the administration of injectable compositions and hence a solution to the problem is sought via microwave processing. This solution through microwave exposure is based on a phenomenon that microwave irradiation can remove all water molecules from the alkaline earth phosphate cement paste to temporarily stop the setting reaction while preserving the active precursor phase in the formulation. The setting reaction can be initiated a second time by adding aqueous medium, but without any exothermicity. Second, a special emphasis is placed on using this technique to synthesize magnesium phosphate cements for orthopedic applications with their enhanced mechanical properties and possible uses as drug and protein delivery vehicles. The as-synthesized cements were evaluated for the occurrences of exothermic reactions, setting times, presence of Mg-phosphate phases, compressive strength levels, microstructural features before and after soaking in (simulated body fluid) SBF, and in vitro cytocompatibility responses. The major results show that exposure to microwaves solves the exothermicity problem, while simultaneously improving the mechanical performance of hardened cements and reducing the setting times. As expected, the cements are also found to be cytocompatible. Finally, it is observed that this process can be applied to calcium phosphate cements system (CPCs) as well. Based on the results, this microwave exposure provides a novel technique for the processing of injectable phosphate bone cement compositions.

Ring-opening polymerization of cyclic esters by phenoxy-thioether complexes derived from biocompatible metals.

A series of novel Mg(II) and Zn(II) complexes of the form LMX or L2M, supported by phenoxy-thioether ligands bearing different substituents at the ortho position of the thiophenol rings [L(-) = 4,6-tBu2-OC6H2-2-CH2S(2-R-C6H4)(-)] [M = Zn, R = H, X = N(SiMe3)2 (1) and X = Et (2); M = Mg, X = n-Bu, R = H (3), R = CH3 (4), R = Br (5); M = Mg, R = H (6)], were synthesized and characterized. Reaction of the proper zinc precursor (Zn[N(SiHMe2)2]2 or ZnEt2) with one equivalent of the phenoxy-thioether proligand produced the corresponding amido (1) and ethyl (2) zinc complexes in high yields. The monoalkylmagnesium complexes (3-5) were all obtained by butane elimination reaction of the dialkylmagnesium reagent, Mg(n-Bu)2, with one equivalent of the proligand in good yields. The homoleptic complex 6 was obtained by reaction of 0.5 equivalent of Mg(n-Bu)2 and the proper proligand. Variable temperature (1)H NMR studies performed on 2 and 3 demonstrated that the named complexes are involved in fluxional processes concerning a fast conformational change of the six-membered metallacycle. DOSY (Diffusion Ordered SpectroscopY) (1)H experiments and ligand scrambling strongly suggested that complexes 1-6 exist as dimeric species in solution. All complexes were active as catalysts in the ring-opening polymerization of cyclic esters. In particular, magnesium complexes showed superior ε-caprolactone and lactide ROP behavior in terms of activity, control of molecular weights and molecular weight distributions.

Antimicrobial properties and dentin bonding strength of magnesium phosphate cements.

The main objective of this work was to assess the antimicrobial properties and the dentin-bonding strength of novel magnesium phosphate cements (MPC). Three formulations of MPC, consisting of magnesium oxide and a phosphate salt, NH4H2PO4, NaH2PO4 or a mixture of both, were evaluated. As a result of the setting reaction, MPC transformed into either struvite (MgNH4PO4·6H2O) when NH4H2PO4 was used or an amorphous magnesium sodium phosphate when NaH2PO4 was used. The MPC had appropriate setting times for hard tissue applications, high early compressive strengths and higher strength of bonding to dentin than commercial mineral trioxide aggregate cement. Bacteriological studies were performed with fresh and aged cements against three bacterial strains, Escherichia coli, Pseudomonas aeruginosa (planktonic and in biofilm) and Aggregatibacter actinomycetemcomitans. These bacteria have been associated with infected implants, as well as other frequent hard tissue related infections. Extracts of different compositions of MPC had bactericidal or bacteriostatic properties against the three bacterial strains tested. This was associated mainly with a synergistic effect between the high osmolarity and alkaline pH of the MPC. These intrinsic antimicrobial properties make MPC preferential candidates for applications in dentistry, such as root fillers, pulp capping agents and cavity liners.

Fabrication of novel poly(lactic acid)/amorphous magnesium phosphate bionanocomposite fibers for tissue engineering applications via electrospinning.

Fibrous bionanocomposites consisting of amorphous magnesium phosphate (AMP) nanospheres and polylactic acid (PLA) were fabricated by electrospinning. There are two important signatures of this paper. First, AMP, as an alternative to well-known calcium phosphate (CaP) materials, is added to PLA as the second phase. To the best of our knowledge, it is the first attempt to fabricate magnesium phosphate (MgP)/biopolymer composite. This is made possible by our previously reported research on the successful synthesis of AMP nanospheres via microwave processing. Second, the sustained release of magnesium and phosphate ions from PLA matrix can stimulate a series of cell responses. The structure of the composites and their bone-like apatite-forming abilities in simulated body fluid (SBF) were examined. Additionally, the effects on the proliferation and differentiation of preosteoblast cells were evaluated by performing in vitro cell culture and monitoring markers such as Osteocalcin (OCN), Osteopontin (OPN), Alkaline phosphatase (ALP) and Collagen type-I (Col I) using real-time polymerase chain reaction (PCR). For better dispersion of AMP in the fibers, a surfactant, 12-hydroxysteric acid (HSA), as previously reported in the literature, was used. However, HSA significantly inhibited the proliferation and differentiation of preosteoblast cells, indicating the potential risk in using HSA in the combination of AMP or MgP in tissue engineering applications.