Complete removal of arsenic and zinc from a heavily contaminated acid mine drainage via an indigenous SRB consortium.

Acid mine drainages (AMD) are major sources of pollution to the environment. Passive bio-remediation technologies involving sulfate-reducing bacteria (SRB) are promising for treating arsenic contaminated waters. However, mechanisms of biogenic As-sulfide formation need to be better understood to decontaminate AMDs in acidic conditions. Here, we show that a high-As AMD effluent can be decontaminated by an indigenous SRB consortium. AMD water from the Carnoulès mine (Gard, France) was incubated with the consortium under anoxic conditions and As, Zn and Fe concentrations, pH and microbial activity were monitored during 94days. Precipitated solids were analyzed using electron microscopy (SEM/TEM-EDXS), and Extended X-Ray Absorption Fine Structure (EXAFS) spectroscopy at the As K-edge. Total removal of arsenic and zinc from solution (1.06 and 0.23mmol/L, respectively) was observed in two of the triplicates. While Zn precipitated as ZnS nanoparticles, As precipitated as amorphous orpiment (am-AsIII2S3) (33-73%), and realgar (AsIIS) (0-34%), the latter phase exhibiting a particular nanowire morphology. A minor fraction of As is also found as thiol-bound AsIII (14-23%). We propose that the formation of the AsIIS nanowires results from AsIII2S3 reduction by biogenic H2S, enhancing the efficiency of As removal. The present description of As immobilization may help to set the basis for bioremediation strategies using SRB.

Co-sequestration of Zn(II) and phosphate by γ-Al2O3: From macroscopic to microscopic investigation.

Little information is available concerning co-sorbing oxyanion and metal contaminants in the environment, yet in most metal-contaminated areas, co-contamination by phosphate is common. In this study, the mutual effects of phosphate and Zn(II) on their interaction with γ-Al2O3 are investigated by batch experiments and X-ray absorption fine structure spectroscopy (XAFS) technique. The results show that the co-sorption of phosphate on γ-Al2O3 modifies both the extent of Zn(II) sorption and the local atomic structures of sorbed Zn(II) ions. Multiple mechanisms are involved in Zn(II) retention in the presence of phosphate, including electrostatic interaction, binary and ternary surface complexation, and the formation of Zn(II)-phosphate polynuclear complexes. At pH 6.5, type III ternary surface complexation occurs concurrently with binary Zn-alumina surface complexation at low phosphate concentrations, whereas the formation of type III ternary surface complexes is promoted as the phosphate concentration increases. With further increasing phosphate concentration, Zn(II)-phosphate polynuclear complexes are formed. At pH 8.0, Zn dominantly forms type III ternary surface complexes in the presence of phosphate. The results of this study indicate the variability of Zn complexation on oxide surface and the importance of combining macroscopic observations with XAFS capable of determining metal complex formation mechanism for ternary system.

Cement kiln dust (CKD)-filter sand permeable reactive barrier for the removal of Cu(II) and Zn(II) from simulated acidic groundwater.

The hydraulic conductivity and breakthrough curves of copper and zinc contaminants were measured in a set of continuous column experiments for 99 days using cement kiln dust (CKD)-filter sand as the permeable reactive barrier. The results of these experiments proved that the weight ratios of the cement kiln dust-filter sand (10:90 and 20:80) are adequate in preventing the loss of reactivity and hydraulic conductivity and, in turn, avoiding reduction in the groundwater flow. These results reveal a decrease in the hydraulic conductivity, which can be attributed to an accumulation of most of the quantity of the contaminant masses in the first sections of the column bed. Breakthrough curves for the description of the temporal contaminant transport within the barrier were found to be more representative by the Belter-Cussler-Hu and Yan models based on the coefficient of determination and Nash-Sutcliffe efficiency. The longevity of the barrier was simulated for the field scale, based on the laboratory column tests and the values verified that cement kiln dust can be effectively used in the future, as the reactive material in permeable reactive barrier technology. These results signify that the longevity of the barrier is directly proportional to its thickness and inversely to the percentage of the CKD used.

Basic studies on the role of components of Bacillus megaterium as flotation biocollectors in sulphide mineral separation.

Studies were carried out to assess the utility of the cellular and extracellular constituents of Bacillus megaterium for the flotation of sphalerite and galena minerals. Based on the flotation results on the individual minerals, it was observed that sphalerite was preferentially floated compared to galena. A maximum selectivity index (SI) value of 11.7 was achieved in the presence of the soluble fraction of the thermolysed cells, which was higher than that obtained with the intact cells (SI of 6.5) and the insoluble fraction of the thermolysed cells (SI of 9.6). The results of the various enzymatic treatment tests revealed that extracellular DNA played a vital role in the selective flotation of sphalerite. A noteworthy finding was that the single-stranded DNA (ssDNA) had a higher biocollector capacity vis-à-vis the double-stranded DNA (dsDNA), leading to better flotation efficiency. About 95 % recovery of sphalerite could be achieved from the mineral mixture by the combined addition of the ssDNA with the non-DNA components of the bacterial cells, resulting in a maximum SI of 19.1. Calcium and phosphate components of the nutrient media were found to be essential for better selectivity of separation of sphalerite. The mechanisms of microbe-mineral interaction are discussed.

Microbially induced selective flotation of sphalerite from galena using mineral-adapted strains of Bacillus megaterium.

The selective flotation of sphalerite from a sphalerite-galena mineral mixture has been achieved using cells and extracellular secretions of Bacillus megaterium after adaptation to the chosen minerals. The extracellular secretions obtained after thermolysis of bacterial cells adapted to sphalerite yield the highest flotation recovery of sphalerite with a selectivity index value of 24.5, in comparison to the other cellular and extra-cellular bio-reagents studied. The protein profile for the unadapted and mineral-adapted cells has been found to differ distinctly, attesting to variation in the yield and nature of extra-cellular polymeric substances (EPS). The changes induced in the bacterial cell wall components after adaptation to sphalerite or galena with respect to the contents of phosphate, uronic acid and acetylated sugars of B. megaterium have been quantified. The role of the dissolved metal ions from the minerals as well as that of the constituents of extracellular secretions in modulating the surface charge of the bacterial cells as well as the minerals under study has been confirmed using various enzymatic treatments of the bacterial cells. It has been demonstrated that the induction of additional molecular weight protein fractions as well as the higher amount of extracellular proteins and phosphate secreted after adaptation to sphalerite vis-à-vis galena are contributory factors for the selective separation of sphalerite from galena.

Biomining with bacteriophage: selectivity of displayed peptides for naturally occurring sphalerite and chalcopyrite.

During mineral processing, concentrates of sulfide minerals of economic interest are formed by froth flotation of fine ore particles. The method works well but recovery and selectivity can be poor for ores with complex mineralogy. There is considerable interest in methods that improve the selectivity of this process while avoiding the high costs of using flotation chemicals. Here we show the first application of phage biotechnology to the processing of economically important minerals in ore slurries. A random heptapeptide library was screened for peptide sequences that bind selectively to the minerals sphalerite (ZnS) and chalcopyrite (CuFeS2). After several rounds of enrichment, cloned phage containing the surface peptide loops KPLLMGS and QPKGPKQ bound specifically to sphalerite. Phage containing the peptide loop TPTTYKV bound to both sphalerite and chalcopyrite. By using an enzyme-linked immunosorbant assay (ELISA), the phage was characterized as strong binders compared to wild-type phage. Specificity of binding was confirmed by immunochemical visualization of phage bound to mineral particles but not to silica (a waste mineral) or pyrite. The current study focused primarily on the isolation of ZnS-specific phage that could be utilized in the separation of sphalerite from silica. At mining sites where sphalerite and chalcopyrite are not found together in natural ores, the separation of sphalerite from silica would be an appropriate enrichment step. At mining sites where sphalerite and chalcopyrite do occur together, more specific phage would be required. This bacteriophage has the potential to be used in a more selective method of mineral separation and to be the basis for advanced methods of mineral processing.

The effects of Fe(II) and Fe(III) concentration and initial pH on microbial leaching of low-grade sphalerite ore in a column reactor.

In this study the effects of initial concentration of Fe(II) and Fe(III) ions as well as initial pH on the bioleaching of a low-grade sphalerite ore in a leaching column over a period of 120 days with and without bacteria were investigated. Four different modifications of medium were used as column feed solutions to investigate the effects of initial concentration of Fe(II) and Fe(III) ions on zinc extraction. The experiments were carried out using a bench-scale, column leaching reactor, which was inoculated with mesophilic iron oxidizing bacteria, Acidithiobacillus ferrooxidans, initially isolated from the Sarcheshmeh chalcopyrite concentrate (Kerman, Iran). The effluent solutions were periodically analyzed for Zn, total Fe, Fe(II) and Fe(III) concentrations as well as pH values. Bacterial population was measured in the solution (free cells). Maximum zinc recovery in the column was achieved about 76% using medium free of initial ferrous ion and 11.4 g/L of ferric ion (medium 2) at pH 1.5. The extent of leaching of sphalerite ore with bacteria was significantly higher than that without bacteria (control) in the presence of ferrous ions. Fe(III) had a strong influence in zinc extraction, and did not adversely affect the growth of the bacteria population.

Separation of selenium, zinc, and copper compounds in bovine whey using size exclusion chromatography linked to inductively coupled plasma mass spectrometry.

To study the role of trace elements for the quality and nutritional value of bovine milk, the distribution of selenium, zinc, and copper in whey was investigated using a method linking size exclusion chromatography to inductively coupled plasma mass spectrometry (SEC-ICP-MS). Three major peaks were detected for selenium, two peaks for zinc, and five peaks for copper. More than 65% of the selenium was found in protein fractions, mainly in fractions coinciding with the major whey proteins beta-lactoglobulin and alpha-lactalbumin. All zinc was associated with low molecular weight compounds (<5 kDa) and one of these compounds was probably citrate. More than 60% of the copper eluted in protein fractions and two of the five major peaks probably contained metallothionein and citrate. This method was used to compare milk and whey produced by organic and conventional feeding procedures. The selenium content in whey and desalted milk produced using organic regimens was significantly lower than that in conventional samples. Moreover, the proportion of selenium in protein fractions of organic whey was significantly smaller than that in conventional whey, but the distributions of zinc and copper did not differ. This study showed that with the SEC-ICP-MS technique the distribution profiles of several trace elements in whey could be studied in the same run and that the selenium profile differed in whey produced by organic and conventional procedures.

A Raman study of CdSe and ZnSe nanostructures.

Raman studies have been carried out on CdSe nanotubes and ZnSe nanorods produced by surfactant-assisted synthesis. The Raman spectrum of CdSe nanotubes shows modes at 207.5 and 198 cm-1; the former arises from the longitudinal optic phonon mode red-shifted with respect to the bulk mode because of phonon confinement, and the latter is the l = 1 surface phonon. Analysis based on the phonon confinement model demonstrates that the size of the nanoparticle responsible for the red-shift is about 4 nm, close to the estimate from the blue-shift of the photoluminescence. The Raman spectrum of ZnSe nanorods shows modes at 257 and 213 cm-1, assigned to longitudinal and transverse optic phonons, blue-shifted with respect to the bulk ZnSe modes because of compressive strain. The mode at 237 cm-1 is the surface phonon.

Layer-by-layer growth of CdSe-based nanocrystal light-emitting diodes.

The partial exchange of surface-passivating trioctylphosphine oxide (TOPO) on CdSe and ZnS-clad CdSe (CdSe/ZnS) nanocrystals with primary amines was utilized to grow ultra-thin films of these nanocrystals under nonaqueous conditions. This growth was achieved using 1,12-diaminododecane in a layer-by-layer assembly format, where one of the amino groups binds with the nanocrystal surface and the other regenerates the interface for further binding of nanocrystals. The nature of the growth is dependent on the relative surface affinity between the TOPO and the primary amine toward the zinc or cadmium sites on the nanocrystals. Using this technique, high-quality luminescent films of these nanocrystals can be built with well-defined thicknesses. Electroluminescent devices have been fabricated using this methodology.

Cyanobacteria carrying an smt-lux transcriptional fusion as biosensors for the detection of heavy metal cations.

The metal-responsive smt operator/promoter region of Synechococcus PCC7942 was fused to the luxCDABE genes of Vibrio fischeri. Plasmid DNA (pJLE23) carrying this fusion conferred metal ion-inducible luminescence to transformed cyanobacteria. Synechococcus PCC7942 (pJLE23) was sensitive to ZnCl2 concentrations within a range of 0.5-4 microM as demonstrated by induction of luminescence. Trace levels of CuSO24 and CdCl2 were also detected.

Effectiveness of cleaning surgical implants: quantitative analysis of contaminant removal.

Surgical implants need to be free from contaminants before implantation. The effectiveness of a presently used Clemson bioengineering cleaning (CBC) protocol was evaluated for cleaning three different biomaterials (titanium, aluminum oxide, and polyethylene terephthalate, PET) contaminated with three different contaminants (calcium chloride, zinc chloride, and hexadecane). Radiolabeled tracer analysis (RTA), with the use of liquid scintillation, was used as the surface analytical technique to quantitatively determine the percent contaminant removed from the biomaterial surface. On average, the ultrasonic cleaning step removed 99.96% of all three contaminants from both titanium and aluminum oxide. The CBC protocol did not sufficiently clean PET fabric contaminated with hexadecane leaving 11.76% of the contaminant after the ultrasonic step. With the use of isopropyl alcohol in series with 1% Liquinox, the ultrasonic step cleaned the fabric soiled with hexadecane within 30 min, removing 99.85% of the hexadecane initially on the surface. RTA proved to be an excellent method of quantifying surface contamination on implant materials, and for assessing the effectiveness of cleaning protocols in question.

[Neuroactive complexed zinc compounds from bovine brain]. / Neiroaktivnye kompleksnye soedineniia tsinka iz mozga krupnogo rogatogo skota.

The fraction obtained from acidic extract of bovine brain homogenate after several steps of chromatographic purification provokes spontaneous aggressive encounters in rats upon intracerebroventricular injection. The simultaneous long-term raising of electric shock-induced aggression with the suppressing of muricidal and intraspecies aggressive behaviour has been observed. Intravenous and intraperitoneal injections of this fraction induce no behavioural changes in rats. It has been determined that the fraction consists of complex compounds of zinc with various aliphatic amines. A similar or higher behavioural activity has been discovered in series of synthetic complexes of zinc with different ligands, that are suggested for use in modelling any nervous and psychiatric disorders connected with an increased aggression level.