Enhancement of Exfoliating Effects through the Novel Cosmetic Ingredient Mandelic acid_Carnitine Ion-Pairing Complex.

PURPOSE: This study aimed to develop a novel exfoliating material with high efficacy and low irritation by synthesizing the Mandelic acid_Carnitine ion pairing complex (M_C complex) and evaluating its exfoliating properties. Additionally, the study assessed the skin improvement effects of the M_C complex through clinical evaluations. METHODS: The M_C complex was synthesized in a 1:1 molar ratio of Mandelic acid and Carnitine. Structural characterization was performed using dynamic light scattering and Fourier-transform infrared spectroscopy. Exfoliating efficacy was evaluated on porcine skin, and clinical assessments were conducted on human subjects to measure various skin improvement parameters. RESULTS: The formation of the M_C complex was confirmed through particle size analysis, zeta-potential measurements, and FT-IR spectroscopy. The M_C complex demonstrated superior exfoliating efficacy compared to Mandelic acid alone, especially at pH 4.5. Clinical evaluations showed significant improvements in blackheads, whiteheads, pore volume, depth, density, count, and affected area, as well as skin texture. No adverse reactions were observed. CONCLUSION: The M_C complex exhibits high exfoliating efficacy and minimal irritation, making it a promising cosmetic ingredient for improving skin health. These findings support its potential as a low-irritation exfoliating material under mildly acidic conditions, contributing to overall skin health enhancement.

For the occurrence of PPCPs from source to tap: A novel approach modified in terms of sample preservation and SPE cartridge to monitor PPCPs in our water supply.

BACKGROUND: The ongoing infusion of pharmaceutical and personal care products (PPCPs) into ecosystems sustains a perpetual life cycle and leads to multi-generational exposures. Limited understanding of their environmental impact and their intrinsic ability to induce physiological effect in humans, even at low doses, pose great risks to human health. Few scholarly works have conducted systematic research into the occurrence of PPCPs within potable water systems. Concurrently, the associated monitoring techniques have not been comprehensively examined with regards to the specific nature of drinking water, namely whether the significant presence of disinfectants may influence the detection of PPCPs. RESULTS: A modified approach in terms of detailed investigation of sample preservation and optimization of an in-lab fabricated solid phase extraction (SPE) cartridge filled with DVB-VP and PS-DVB sorbent was proposed. Favorable methodological parameters were achieved, with correlation coefficients spanning from 0.9866 to 0.9998. The LODs of the PPCPs fluctuated from 0.001 to 2 µg L-1, while the LOQs varied from 0.002 to 5 µg L-1. The analysis of spiked samples disclosed a methodological precision of 2.31-9.86 % and a recovery of 52.4-119 %. We utilized the established method for analyzing 14 water samples of three categories (source water, finished water and tap water) from five centralized water supply plants. A total of 24 categories encompassing 72 PPCPs were detected, with the concentrations of PPCPs manifested a marked decrease from source water to finished water and finally to tap water. SIGNIFICANCE: Our research meticulously examined the enhancement and purification effects of widely used commercial SPE cartridges and suggested the use of in-lab fabricated SPE cartridges packed with DVB-VP and PS-DVB adsorbents. We also conducted a systematic evaluation of the need to incorporate ascorbic acid and sodium thiosulfate as preservatives for PPCP measurement, in consideration of the unique characteristics of drinking water matrices, specifically, the significant concentration levels of disinfectants. Furthermore, the proposed method was effectively employed to study the presence of PPCPs in source water, finished water, and tap water collected from centralized water supply plants.

Rapid determination of 111 anti-infective drugs possibly added in cosmetics using high-performance liquid chromatography-tandem mass spectrometry with scheduled multiple reaction monitoring.

RATIONALE: Illegal addition of anti-infective drugs to cosmetics at low concentrations has been found. The illicit addition of anti-infective drugs encompasses a wide variety of medications. The current sample purification methods are inadequate to detect all these compounds. A sensitive, wide-coverage, and weak-matrix-effect measurement method needs to be established to address this issue. METHODS: Samples were extracted using acetonitrile, diluted 25 times, and then analyzed using liquid chromatography-tandem mass spectrometry (LC-MS/MS) to detect 111 anti-infective drugs. The method was validated and assessed for matrix effect before being applied to cosmetic products. RESULTS: The calibration curves for the analytes exhibited a strong correlation coefficient (r > 0.995). The limit of detection ranged from 0.006 to 0.6 mg/kg. Matrix effects were significantly improved after a 25-fold dilution. The method was successfully applied to various cosmetics. Two of 82 samples tested contained lincomycin and miconazole, respectively. CONCLUSIONS: The developed method is quick and reliable to analyze anti-infective drugs in cosmetics, with potential for both qualitative and quantitative analyses. It is a valuable tool for cosmetic research and development, contributing to safer and more effective cosmetic products.

Deep Learning Model for Cosmetic Gel Classification Based on a Short-Time Fourier Transform and Spectrogram.

Cosmetics and topical medications, such as gels, foams, creams, and lotions, are viscoelastic substances that are applied to the skin or mucous membranes. The human perception of these materials is complex and involves multiple sensory modalities. Traditional panel-based sensory evaluations have limitations due to individual differences in sensory receptors and factors such as age, race, and gender. Therefore, this study proposes a deep-learning-based method for systematically analyzing and effectively identifying the physical properties of cosmetic gels. Time-series friction signals generated by rubbing the gels were measured. These signals were preprocessed through short-time Fourier transform (STFT) and continuous wavelet transform (CWT), respectively, and the frequency factors that change over time were distinguished and analyzed. The deep learning model employed a ResNet-based convolution neural network (CNN) structure with optimization achieved through a learning rate scheduler. The optimized STFT-based 2D CNN model outperforms the CWT-based 2D and 1D CNN models. The optimized STFT-based 2D CNN model also demonstrated robustness and reliability through k-fold cross-validation. This study suggests the potential for an innovative approach to replace traditional expert panel evaluations and objectively assess the user experience of cosmetics.

The influence of Leucidal, a natural cosmetic preservative, on fibroblast and keratinocytes. Studies on cells and on model membrane systems.

The aim of this work was to investigate the influence of Leucidal® Liquid (abbr. Leucidal), which is recommended as a natural cosmetic ingredient of antimicrobial properties, on model membranes of keratinocytes and fibroblasts. The toxicity tests on cell lines were also performed to allow for a more detailed discussion of the results. As model membrane systems the lipid Langmuir monolayers were applied. During the investigations, the surface pressure/area measurements, penetration studies and Brewster Angle Microscopy (BAM) visualization were performed for one component and mixed lipid monolayers. It was evidenced that at the membrane - corresponding conditions, the components of Leucidal do not penetrate either model keratinocyte and fibroblast membranes or one component films composed of the major lipids of skin cell membranes. Leucidal makes these systems slightly more expanded and less stable, however this is not reflected in the changes in the film morphology. Only the ceramide systems were sensitive to the presence of Leucidal, i.e. the incorporation of Leucidal components manifested well in the decrease of the films' condensation and alterations in their morphology. The tests on cells demonstrated that Leucidal is non toxic for these types of cells at the concentrations suggested by the producer. A thorough comparison of these results with those published for bacteria model membranes enabled us to discuss them in the context of the mechanism of action of Leucidal components. It was concluded that Leucidal components are of low affinity to the skin cellular model membranes of low content of Leucidal-sensitive ceramides and are not toxic for fibroblast and keratinocyte cell lines. Moreover, the lipid composition of the membrane and its molecular organization can be important targets for Leucidal components, decisive from the point of view of the activity and selectivity of the studied composition.

Preparation of high antioxidant nanolignin and its application in cosmetics.

Lignin, as a natural polyphenol, displays anti-oxidant activity by trapping and binding free radicals through its free phenolic hydroxyl groups. However, the most accessible form, industrial lignins, generally has low phenolic hydroxyl content, which severely limits their application value and scenarios. Herein, we showed that potassium-glycerate deep eutectic solvent (PG-DES) treatment can be combined with laccase oxidation to afford prepared high antioxidant lignin nanoparticles (HA-LNPs) with notably improved anti-oxidant activities benefiting from both the enhanced phenolic hydroxyl content 170.8 % and reduced average particle size (59.0 nm). At concentrations as low as 60 µg/mL, HA-LNPs showed favorable effects in promoting collagen formation. When HA-LNPs were used as an active ingredient in the anti-aging mask formulation, the reactive oxygen species (ROS) scavenging activity of mask samples containing 0.4 % HA-LNPs reached 37.2 %. The data suggest great promise of HA-LNPs as a natural antioxidant for formulating in anti-aging skin care products.

Cosmetically Approved Short-Chain Alcohol/Triethyl Citrate/Water Surfactant-Free Microemulsions and Potential Application to Transdermal Penetration of α-Arbutin.

Surfactant-free microemulsions (SFMEs) exhibited remarkable advantages and potential, attributed to their similarity to traditional surfactant-based microemulsions and the absence of surfactants. Herein, a novel SFME was developed utilizing cosmetically approved materials, such as short-chain alcohol as an amphi-solvent, triethyl citrate (TEC) as the nonpolar phase, and water as the polar phase. 1,2-Pentanediol (PtDO)/TEC/water combination can form the largest monophasic zone, accounting for ∼74% of the total phase diagram area, due to an optimal hydrophilic (water)-lipophilic (TEC) balance. Comparable to surfactant-based microemulsion, PtDO/TEC/water SFME can also be categorized into three types: water-in-oil, discontinuous, and oil-in-water. As TEC or water is increased, or PtDO is decreased, the nanoaggregates in PtDO/TEC/water SFME grow from <5 nm to tens of nanometers. The addition of α-arbutin (ABN) does not disrupt PtDO/TEC/water SFME, but rather enhances its formation, resulting in a larger monophasic area and consistent size (2.8-3.8 nm) through participating in interface assembly. Furthermore, ABN-loaded PtDO/TEC/water SFME exhibits remarkable resistance to dilution, exceptional stability, and minimal irritation. Notably, PtDO/TEC/water SFME significantly boosts ABN's solubility in water by 2 times, its percutaneous penetration rate by 3-4 times, and enables a slow-release DPPH• radical scavenging effect. This SFME serves as a safe and cosmetically suitable nanoplatform for the delivery of bioactive substances.

Azadirachta indica leaf extract based green-synthesized ZnO nanoparticles coated on spent tea waste activated carbon for pharmaceuticals and personal care products removal.

Pharmaceuticals and personal care products (PPCPs) are emerging contaminants in aqueous systems, posing threat to both human health and environment. In prior research, predominant focus has been on examining various adsorbents for removing PPCPs from single-pollutant systems. However, no study has delved into simultaneous adsorption of PPCPs multi-pollutant mixture. This study evaluates performance of Azadirachta indica leaf extract-based green-synthesized ZnO nanoparticles coated on spent tea waste activated carbon (ZTAC) for removing sulfadiazine (SZN) and acetaminophen (ACN). Adsorption investigations were conducted in single-component (ACN/SZN) and binary-component (ACN + SZN) systems. The synthesized ZTAC was characterized using SEM, XRD, FTIR, EDX, porosimetry and pHpzc analysis. The study examines impact of time (1-60 min), dose (0.2-4 g/L), pH (2-12) and PPCPs concentration (1-100 mg/L) on ACN and SZN removal. Various kinetic and isotherm models were employed to elucidate mechanisms involved in sorption of PPCPs. Furthermore, synergistic and antagonistic aspects of sorption process in multi-component system were investigated. ZTAC, characterized by its crystalline nature and surface area of 980.85 m2/g, exhibited maximum adsorption capacity of 47.39 mg/g for ACN and 34.01 mg/g for SZN under optimal conditions of 15 min, 3 g/L and pH 7. Langmuir isotherm and pseudo-second-order kinetic model best-fitted the experimental data indicating chemisorption mechanism. Removal of ACN and SZN on ZTAC demonstrated synergistic nature, signifying cooperative adsorption. Overall, valorization of ZTAC offers effective and efficient adsorbent for elimination of PPCPs from wastewater.

Per- and polyfluoroalkyls used as cosmetic ingredients - Qualitative study of 765 cosmetic products.

Per- and polyfluoroalkyl substances (PFAS) form a vast family comprising more than 4700 synthetic compounds. Their molecules contain a terminal functional group and a hydrophobic carbon tail (alkyl group) at which the hydrogen atoms are totally (in the case of perfluorinated compounds) or partially (in the case of polyfluorinated compounds) replaced by fluorine atoms. Due to the very specific properties of their structure, they have been used in a vast range of applications over the last 70 years. These substances are considered to be of concern for the environment. Their effects on human health are still poorly understood because studies are still too rare, but the cutaneous route could be a significant pathway of penetration. In this context, we made a qualitative study to assess the presence of PFAS in various cosmetics such as hygiene products, skin care products, make-up and perfumes. Among the 765 products studied, we found 11 different PFAS. Polytetrafluoroethylene (PTFE) and perfluorodecalin, present in 25.9% and 22.2% of products containing it, respectively, were the most frequent. Although the presence of this type of ingredient seems to be limited in Europe, make-up appears to be the type of product most likely to contain PFAS.

Occurrence of alkyl glucosides in rinse-off cosmetics marketed as hypoallergenic or for sensitive skin.

Rinse-off cosmetic products, primarily shampoos, are frequently implicated in the onset of allergic contact dermatitis (ACD) caused by alkyl glucosides (AGs). AGs are increasingly popular surfactants and known contact allergens. Glucoside-induced ACD was most frequently observed with shampoos and skin-cleansing products in both consumer and occupational settings. Thereby, studies have shown that atopic individuals are the most susceptible to ACD. Also, several investigations have indicated that individuals with sensitive skin might be more prone to skin allergies. This is why the presence of AGs was investigated in shampoos and body cleansers marketed as hypoallergenic or for sensitive skin. For this purpose, the website of Amazon.com was surveyed. Four groups of cosmetics were obtained by using the following keywords: "hypoallergenic shampoo for adults," "sensitive skin shampoo for adults," "hypoallergenic body cleanser for adults," and "sensitive skin body cleanser for adults." The first 30 best-selling cosmetics in each group were investigated for the presence of AGs, by analyzing the product information pages. The results showed that as much as 56.7% of hypoallergenic shampoos contained AGs, as ingredients, whereas the percentage was somewhat lower for other product categories. Even though decyl and lauryl glucoside were nearly ubiquitously used AGs in cosmetics over the past decade, the most commonly present AG in our analysis was coco-glucoside. The results of this study indicated a necessity to include coco-glucoside in the baseline series of patch testing allergens. Industry, regulators, and healthcare providers should be made aware of the frequent presence of AGs in rinse-off cosmetic products marketed as hypoallergenic or for sensitive skin to ensure the safety and well-being of consumers and patients.

Characterization of banned colorants in cosmetics: A tandem mass-based molecular networking approach.

Colorants have been a staple in the cosmetics industry for a considerable time, although certain varieties have been banned owing to health risks. Detecting and confirming these banned colorants simultaneously poses several challenges when employing LC-MS/MS. Molecular networking is a promising analytical technology that can be used to predict the structure of components and the correlation between them using structural and MS/MS spectral similarities. Molecular networking entails assessing the number of fragmented ions and the cosine score (the closer it is to one, the higher the similarity). In this study, we developed and verified a method for the simultaneous quantitative analysis of the 26 banned colorants in cosmetics using LC-MS/MS. Additionally, we propose a novel approach that combines LC-Q-TOF-MS and molecular networking technology to detect banned colorants in cosmetics. For successful molecular networking, a minimum of six fragment ions with cosine scores exceeding 0.5 is required. We developed a screening method for characterizing banned colorants using molecular networking based on LC-TOF-MS results for 26 banned colorants. Furthermore, we demonstrated that our established method can be used for screening by analyzing actual cosmetics (eyebrow tattoo, lipstick tattoo, and hair tint) spiked with three non-targeted banned colorants with similar structures (m/z 267.116, 315.149, and 345.157) in cosmetics. The combination of molecular networking techniques and LC-MS/MS proves highly advantageous for the swift characterization and screening of non-targeted colorants in cosmetics.

Target and Suspect Screening for Organic Additives in Six Classifications of Personal Care Products Using Liquid Chromatography-High-Resolution Mass Spectrometry.

Personal care products (PCPs) are integral components of daily human existence, including a large number of chemicals intentionally added for functional attributes (e.g., preservatives and fragrances) or unintentionally present, such as plasticizers. This investigation aimed to optimize the methodology for target and suspect screening via liquid chromatography-high-resolution mass spectrometry, focusing on nine prevalent organic additives (comprising bisphenols A, F, and S, methyl, ethyl, propyl, and butylparaben, 5-chloro-2-methyl-4-isothiazolin-3-one, and 4-hydroxybenzoic acid). A total of 50 high-selling PCPs were purchased from the local online market as samples. In detail, PCP samples were classified into body washes, shampoos, hair conditioners, facial cleansers, body lotions, and moisture creams. For calibration, the quality assurance and quality control results demonstrated a coefficient of determination (R2) surpassing 0.999, with detection and quantification limits ranging from 2.5 to 100.0 ng/g. For recovery experiments, replicate recoveries (n = 5) ranged from 61 to 134%. In purchased PCP samples, five of the nine target compounds were detected via a target screening. Methylparaben exhibited the highest concentration (7860 mg/kg) in a facial cleanser, which is known as an endocrine-disrupting chemical. A total of 248 suspects of organic additives were screened in PCPs, leading to a tentative identification of 9. Confirmation (confidence level 1) via reference standards was achieved for three suspects, while six were tentatively identified with a confidence level of 2. This two-step extraction methodology utilizing methyl tert-butyl ether and isopropyl alcohol enabled simultaneous analysis of diverse chemical groups with distinct properties.

Market analysis of the presence of endocrine disrupting chemicals in cosmetic products intended for oncological patients and other vulnerable groups.

There is growing concern about the presence of endocrine disrupting chemicals (EDCs) in cosmetics. We aimed to identify the main cosmetic ingredients with suspected endocrine-disrupting properties, and analyse their presence in current marketed products. Particular attention was given to products intended for susceptible (due to physiological status) and vulnerable (due to specific pathologies) groups with a view to informing cosmetologists and related health professionals of the scientific basis and current status of any concerns. Suspected EDCs used as cosmetic ingredients, included in lists published by regulatory agencies, were documented and investigated by weight of evidence analysis based on endocrine-related toxicity studies. In total, 49 suspected EDCs were identified from a sample of over a thousand cosmetic products marketed in the European Union. Suspected EDCs were found in approximately one third of products, with a similar frequency in products intended for susceptible and vulnerable groups. Avobenzone (CAS number:70356-09-1), octisalate (CAS number: 118-60-5), and butylated hydroxytoluene (CAS number: 128-37-0) were mostly commonly identified. The presence of EDCs was particularly high for sun care cosmetic products. Our results highlight potentially significant exposure through cosmetics to substances currently studied by regulatory institutions as suspected endocrine disrupters. EDCs are not yet universally regulated, and informing health professionals and educating the population as a precaution are options to reduce individual exposure levels, especially in vulnerable and susceptible groups. Special recommendations are needed for products intended for oncological patients.

Green electrospun Janus membrane of polyether block amide (PEBA) doped with hierarchical magnesium hydrogen phosphate for the removal of pharmaceuticals and personal care products.

It has been a challenge to prepared polyether block amide (PEBA) fibrous membrane via solution electrospinning. The only few reported methods though involved hazardous solvents and surfactants which were against the principle of green chemistry. In this work, uniform fibrous membrane of PEBA was successfully fabricated by solution electrospinning with a bio-based solvent dihydrolevoglucosenone (Cyrene). To further improve the mechanical strength and adsorption performance of the PEBA membrane, a hierarchical magnesium hydrogen phosphate (MgHPO4·1.2H2O, MHP) was synthesized to blend evenly into the PEBA matrix. A Janus MHP/PEBA membrane with one side of hydrophobic surface and the other side of hydrophilic surface was subsequently prepared, which exhibited fast adsorption, high capacity, good selectivity and reusability towards ibuprofen, acetaminophen, carbamazepine and triclosan. In addition, the Janus membrane showed high removal efficiency of the above contaminants in secondary wastewater effluent with good long term stability. It demonstrated that this Janus MHP/PEBA membrane had a good potential in practical wastewater treatment.

An indicator color chart for quick detection of Pigment Red 53 in cosmetic products in Indonesia.

BACKGROUND: Pigment Red 53 is a dangerous synthetic dye that is often added to cosmetics, even though its use in cosmetic products has been prohibited because of possible impacts on health. Faster and more sensitive detection of Pigment Red 53 is needed for onsite analysis to protect the community from illegal cosmetics that contain the dye. Indicator color charts are a kind of analytical method that can be used to detect Pigment Red 53 in cosmetic products, including lipstick, rouge, and eyeshadow. Such charts are practical, fast, and can be used for onsite analysis. METHODS: In this study, an indicator for Pigment Red 53 detection was obtained through a reagent reaction that caused a specific color change. An indicator color chart was then produced by setting out in paper form the series of colors which resulted from the reaction of specific chemical reagents and Pigment Red 53 solutions at concentrations of 10, 20, 40, 60, 80, and 100 ppm. RESULTS: The testing results showed that the indicator color chart may be used as an initial screening method for the detection of Pigment Red 53 in cosmetic products with a detectable minimum concentration of 10 ppm. Out of nine samples, only one (Eyeshadow 3) tested positive for Pigment Red 53. Further analysis was carried out on the indicator color chart and the results showed good agreement with TLC and UV-Vis spectrophotometry methods. CONCLUSION: The results reported in this paper demonstrate that the indicator color chart is a good prospective method for onsite analysis to detect Pigment Red 53 in cosmetic samples, with a lower detection limit compared to polymer-based indicators.

Future proofing of chondroitin sulphate production: Importance of sustainability and quality for the end-applications.

Chondroitin sulphates (CSs) are the most well-known glycosaminoglycans (GAGs) found in any living organism, from microorganisms to invertebrates and vertebrates (including humans), and provide several health benefits. The applications of CSs are numerous including tissue engineering, osteoarthritis treatment, antiviral, cosmetics, and skincare applications. The current commercial production of CSs mostly uses animal, bovine, porcine, and avian tissues as well as marine organisms, marine mammals, sharks, and other fish. The production process consists of tissue hydrolysis, protein removal, and purification using various methods. Mostly, these are chemical-dependent and are complex, multi-step processes. There is a developing trend for abandonment of harsh extraction chemicals and their substitution with different green-extraction technologies, however, these are still in their infancy. The quality of CSs is the first and foremost requirement for end-applications and is dependent on the extraction and purification methodologies used. The final products will show different bio-functional properties, depending on their origin and production methodology. This is a comprehensive review of the characteristics, properties, uses, sources, and extraction methods of CSs. This review emphasises the need for extraction and purification processes to be environmentally friendly and gentle, followed by product analysis and quality control to ensure the expected bioactivity of CSs.

A sensitive, portable, and smartphone-based whole-cell biosensor device for salicylic acid monitoring.

Considerable effort has been invested in developing salicylic acid (SA) biosensors for various application purposes. Here, by engineering the sensing modules and host cell chassis, we have gradually optimized the NahR-Psal/Pr-based SA biosensor, increasing the sensitivity and maximum output by 17.2-fold and 9.4-fold, respectively, and improving the detection limit by 800-fold, from 80 µM to 0.1 µM. A portable SA sensing device was constructed by embedding a gelatin-based hydrogel containing an optimized biosensor into the perforations of tape adhered to glass slide, which allowed good determination of SA in the range of 0.1 µM-10 µM. Then, we developed a customized smartphone App to measure the fluorescence intensity of each perforation and automatically calculate the corresponding SA concentration so that we could detect SA concentrations in real cosmetic samples. We anticipate that this smartphone-based imaging biosensor, with its compact size, higher sensitivity, cost-effectiveness, and easy data transfer, will be useful for long-term monitoring of SA.

Developing Plant Exosomes as an Advanced Delivery System for Cosmetic Peptide.

Peptides are a promising skincare ingredient, but due to their inherent instability and the barrier function of the skin's surface, they often have limited skin absorption and penetration, which can significantly hinder their skincare benefits. To address this, a novel technique called NanoGlow has been introduced for encapsulating peptide-based cosmetic raw materials into engineered nanosized plant-derived exosomes (pExo) to achieve the goal of a healthier and more radiant skin state. In this approach, pExo served as carriers for cosmetic peptides across the intact skin barrier, enhancing their biological effectiveness in skin beauty. The NanoGlow strategy combines chemical activation and physical proencapsulation, boasting a high success rate and straightforward and stable operation, making it suitable for large-scale production. Comprehensive analysis using in vitro cellular absorption and skin penetration models has demonstrated that the nanosized pExo carriers significantly improve peptide penetration into the skin compared to free peptides. Furthermore, in vivo tissue slice studies have shown that pExo carriers efficiently deliver acetyl hexapeptide-8 to the skin's dermis, surpassing the performance of free peptides. Cosmetic skincare effect analysis has also indicated that pExo-loaded cosmetic peptides deliver superior results. Therefore, the NanoGlow technique harnesses the natural size and properties of pExo to maximize the bioavailability of cosmetic peptides, holding great promise for developing advanced peptide delivery systems in both the cosmetic and medical drug industries.

Zinc Phenolsulfonate.

The Expert Panel for Cosmetic Ingredient Safety reviewed newly available studies since their original assessment in 1986 and a previous re-review in 2004, along with updated information regarding product types and concentrations of use. Considering this information, the Panel confirmed that Zinc Phenolsulfonate is safe as a cosmetic ingredient in the present practices of use and concentration as described in this report.

Influence of cosmetic foundation cream on skin condition during treadmill exercise.

BACKGROUND: There is a growing trend of individuals wearing cosmetics while participating in physical activities. Nonetheless, there remains a need for further understanding regarding the effects of makeup on the facial epidermis during exercise, given the existing knowledge gaps. PURPOSE: This study aimed to evaluate the effects of a cosmetic foundation cream on skin conditions during physical activity. METHODS: Forty-three healthy college students, 20 males (26.3 ± 1.5 years) and 23 females (23.1 ± 1.0 years), were enrolled in this study. Foundation cream was applied to participants on half of the face in two different areas (MT: makeup T zone and MU: makeup U zone). The other half of the face served as internal control (T: non-makeup T zone and U: non-makeup U zones). Skin levels of moisture, elasticity, pore, sebum, and oil were measured using a skin analysis device (Aramhuvis, Gyeonggi, Republic of Korea) before and after a 20-min treadmill exercise. Paired t-test and independent t-test were performed for skin condition measurements at pre- and postexercise. RESULTS: The skin moisture levels in both the T and MT significantly increased after exercise (p < 0.05) (pre-T: 24.5 ± 1.3, post-T: 38.5 ± 3.5 and pre-MT: 18.7 ± 0.7, post-MT: 40.4 ± 4.8). Elasticity also significantly improved in both the T and MT (p < 0.05) (pre-T: 25.6 ± 1.3, post-T: 41.5 ± 3.5 and pre-MT: 20.0 ± 0.9, post-MT: 41.7 ± 3.7). The size of the pores in the T zone observed a significant increase after exercise (p < 0.05) (pre-T: 41.7 ± 2.1, post-T: 47.8 ± 2.4). The sebum levels in the T zone exhibited a reduction following physical activity, whereas there was a notable increase in sebum levels in the makeup zones (p < 0.05) (pre-MT: 2.4 ± 0.7, post-MT:4.2 ± 0.8 and pre MU 1.8 ± 0.34, post MU 4.9 ± 0.9). The oil level was increased in the non-makeup zones (pre-T: 6.1 ± 1.4, post-T: 11.8 ± 2.0 and pre-U: 7.3 ± 1.5, post-U: 11.9 ± 1.9; p < 0.05) and decreased in the makeup zones (pre-MT: 13.3 ± 1.9, post-MT: 7.4 ± 2.3 and pre-MU: 22.1 ± 2.4, post-MU: 3.2 ± 1.0; p < 0.05). CONCLUSIONS: The findings suggest that using foundation cream during aerobic exercise can reduce skin oil, causing dryness. Additionally, makeup can clog pores and increase sebum production. Therefore, wearing makeup may not be recommended for people with dry skin conditions based on the results of the current study. This research offers important insights to the public, encouraging them to consider the possible consequences of using makeup while exercising.