Bi-polymeric Spongy Matrices Through Cross-linking Polymerization: Synthesized and Evaluated for Solubility Enhancement of Acyclovir.

In this study, two hydrophilic polymers hydroxypropyl methyl cellulose and beta-cyclodextrin (ß-CD) are used to synthesize highly responsive and spongy polymeric matrices. Porous and stimulus-responsive polymeric network was developed to improve the solubility of acyclovir (ACV) at significant level. Grafting was successfully carried out by free radical polymerization technique. Spongy matrices were characterized by percentage entrapment efficiency, drug loading, solubility studies, FTIR, powder X-ray diffraction, TGA, DSC, XRD, SEM, swelling studies, and in vitro studies. Acute oral toxicity studies were conducted to determine the safety of oral administration of prepared HPMC-ßCD-g-poly(AMPS) formulation. Porous and spongy structures were depicted in SEM images. Complex formation and thermal stability of constituents and drug (ACV) were analyzed by FTIR, TGA, and DSC spectra. XRD analysis revealed reduction in acyclovir crystallinity in spongy matrices. Particle size of optimized formulation was found in the range of 197 ± 2.55 nm. The momentous difference with reference product committed that drug solubility and release characteristics were markedly enhanced by the developed spongy matrices. Toxicity studies endorsed that developed spongy matrices were non-toxic and compatible to biological system. The efficient method of preparation, enhanced solubility, excellent physico-chemical characteristics, high dissolution, and non-toxic HPMC-ßCD-g-poly(AMPS) spongy matrices may be a promising approach for oral delivery of poorly soluble drugs.

Empirical prediction model based process optimization for droplet size and spraying angle during pharmaceutical fluidized bed granulation.

The objective of this study was to predict the droplet size and the spraying angle during the process of binder atomization in pharmaceutical fluidized bed granulation using an empirical model. The effects of the binder viscosity, the atomization pressure, and the spray rate on the droplet size and the spraying angle were investigated using a response surface central composite design and analysis of variance. Prediction models for droplet size and spraying angle were then established using stepwise regression analysis and were validated by comparing the measured and predicted values. The results showed that the droplet size model and the spraying angle model were well established, with an R2 of 0.93 (p < 0.0001) and a root mean square error (RMSE) of 10.10, and an R2 of 0.82 (p < 0.0001) and an RMSE of 3.69, respectively. The error between the measured and predicted values of the droplet size and the spraying angle were less than 10%, indicating that the established models were accurate. The results of the present study were significant in predicting the droplet size and spraying angle in the process of pharmaceutical fluidized bed granulation.

Exploring the potential of tianeptine matrix tablets: Synthesis, physico-chemical characterization and acute toxicity studies.

The main objective of the present study was to explore the potential of matrix tablets as extended release dosage form of tianeptine, using HMPC K100 as a polymer. HPMC K100 extended the release of the drug from formulation due to the gel-like structure. Direct compression method was adopted to compress the tablets using different concentrations of polymer. Tablets were evaluated for pre-compression and post-compression parameters. Drug release study showed that tablet extends the release of drug with the increasing concentration of polymer. Drug, polymers and tablets were analyzed and/or characterized for compatibility, degradation, thermal stability, amorphous or crystalline nature via FTIR, DSC, TGA, XRD studies. SEM study predicted that tablets had a uniform structure. HPMC K100 based tablets were similar to that of the reference product. Acute toxicity study conducted on Swiss albino mice showed that matrix tablets were safe and non-toxic, as no changes in physical activity and functions of organs were observed. Biochemical and histopathological study revealed lack of any kind of abnormality in liver and renal function. Moreover, necrotic changes were absent at organ level.

Exploring the Potential of Hydrophilic Matrix Combined with Insoluble Film Coating: Preparation and Evaluation of Ambroxol Hydrochloride Extended Release Tablets.

To explore the potential utility of combination of hydrophilic matrix with membrane-controlled technology, the present study prepared tablets of a water-soluble model drug (ambroxol hydrochloride), through process of direct compression and spray coating. Single-factor experiments were accomplished to optimize the formulation. In vivo pharmacokinetics was then performed to evaluate the necessity and feasibility of further development of this simple process and low-cost approach. Various release rates could be easily obtained by adjusting the viscosity and amount of hypromellose, pore-former ratios in coating dispersions and coating weight gains. Dissolution profiles of coated tablets displayed initial delay, followed by near zero-order kinetics. The pharmacokinetic study of different formulations showed that lag time became longer as the permeability of coating membrane decreased, which was consistent with the in vitro drug release trend. Besides, in vitro/in vivo correlation study indicated that coated tablets exhibited a good correlation between in vitro release and in vivo absorption. The results, therefore, demonstrated that barrier-membrane-coated matrix formulations were extremely promising for further application in industrialization and commercialization.

In-Vitro and In-Vivo Evaluation of Supersaturable Self-Nanoemulsifying Drug Delivery System (SNEDDS) of Dutasteride.

OBJECTIVE: A novel, Supersaturable Self-Nanoemulsifying Drug Delivery System (S-SNEDDS) has been prepared to improve the Dutasteride's poor aqueous solubility. METHODS: By adding Hydroxy Propyl Methyl Cellulose (HPMC) as a precipitation inhibitor to conventional SNEDDS, a supersaturable system was prepared. Firstly, the prepared SNEDDS played an important role in increasing the aqueous solubility and hence oral absorption due to nano-range size. Secondly, the S-SNEDDS found to be advantageous over SNEDDS for having a higher drug load and inhibition of dilution precipitation of Dutasteride. Formulated S-SNEDDS (F1-F9) ranged from 37.42 ± 1.02 to 68.92 ± 0.09 nm with PDI 0.219-0.34 and drug loading of over 95 percent. RESULTS: The study of in-vitro dissolution revealed higher dissolution for S-SNEDDS compared to SNEDDS and Avodart soft gelatin capsule as a commercial product. In addition, higher absorption was observed for S-SNEDDS showing approximately 1.28 and 1.27 fold AUC (0-24h) and Cmax compared to commercial products. Therefore, S-SNEDDS has proven as a novel drug delivery system with a higher drug load, higher self-emulsification efficiency, higher stability, higher dissolution and pronounced absorption. CONCLUSION: In conclusion, S-SNEDDS could be a newly emerging approach to enhance aqueous solubility in many folds for drugs belonging to BCS Class II and IV and thus absorption and oral bioavailability.

Designing of a pH-Triggered Carbopol®/HPMC In Situ Gel for Ocular Delivery of Dorzolamide HCl: In Vitro, In Vivo, and Ex Vivo Evaluation.

Dorzolamide HCl (DRZ) ophthalmic drop is one of the most common glaucoma medications which rapidly eliminates after instillation leading to short residence time of the drug on cornea. The purpose of the present study is to develop a pH-triggered in situ gel system for ophthalmic delivery of DRZ for treatment of ocular hypertension. In this study, a 32 full factorial design was used for preparation of in situ gel formulations using different levels of Carbopol® and hydroxyl propyl methyl cellulose (HPMC). Rheological behavior, in vitro drug release, ex vivo corneal permeability, and IOP-lowering activity were investigated. DRZ solution (2% w/v) containing of 0.1% (w/v) Carbopol® and 0.1% (w/v) HPMC was selected as the optimal formulation considering its free flow under non-physiological conditions (initial pH and 25 ± 2°C) and transition to appropriate gel form under physiological circumstance (pH 7.4 and 34°C). This in situ gel presented the mucoadhesive property. Ex vivo corneal permeability of this combined solution was similar to those of DRZ solution. The developed formulation compared to the marketed drop (Biosopt®) and DRZ 2% solution had a better performance in intraocular pressure activity. The efficiency and long duration of IOP reduction could be due to the prolonged residence time of the in situ gel. The presence of Carbopol® as a pH triggered and mucoadhesive polymer causes to attach to the ocular mucosal surface for a long term.

Reducing Burst Release Effect of Freely Water-Soluble Drug Incorporated into Gastro-Floating Formulation Below HPMC Threshold Concentration Through Interpolymer Complex.

Undesired-burst release effect is observed in a freely water-soluble drug formulated into a gastro-floating formulation with effervescent (GFFE) delivery system. In order to address this limitation, interpolymer complex (IPC) of two swellable and non-soluble polymers, poly-ammonium methacrylate and poly-vinyl acetate, was incorporated into hydroxypropyl methyl cellulose (HPMC)-based matrix GFFE. This research studied the effect and interaction of the IPC-HPMC blending on the drug release of GFFE using a freely water-soluble drug, metformin HCl, under different threshold concentration levels and curing effect. The interaction between the IPC and HPMC was characterized using vibrational spectroscopy and thermal analyses under curing and swelling conditions. Anti-solvent followed by lyophilization had better physicochemical and physicomechanic properties than spray dying technique. The interaction was observed by a specific shifting of the vibrational peaks and alteration of the thermal behavior pattern. These effects altered the drug release behavior. Thereafter, the IPC reduced burst release effects in the initial time and during testing, and the IPC improved the HPMC matrix robustness under mechanical stress testing below threshold concentration of HPMC matrix formulated in the GFFE.

Development of High-Strength Extended-Release Multiparticulate System by Crystallo-co-agglomeration Technique with Integration of Central Composite Design.

The number of unit operations to be followed in the preparation of tablets was cumbersome and may introduce material as well as process-related critical parameters which may negatively affect the quality of final formulation. The hypothesis of the present research was to develop directly compressible, high-strength extended-release spherical agglomerates of talc containing indapamide by crystallo-co-agglomeration technique. Hydroxypropyl methylcellulose 15 cps and polyethylene glycol 6000 were used to impart the desired sphericity, strength, and deformability to agglomerates, respectively. Ethyl cellulose 10 cps was used to improve the strength of agglomerates and achieve extended release. Design of experiment (rotatable central composite design) was implemented for the elucidation of the effect of type and quantity of polymers on quality attributes of agglomerates. Prepared agglomerates were evaluated for morphological, micromeritic, mechanical, and drug release properties. A satisfactory yield (> 97%, wt/wt), better crushing strength, and low friability of agglomerates indicated good processing and handling characteristics. Compatibility and reduced crystallinity of indapamide in agglomerates were confirmed by spectroscopic and X-ray diffraction studies. Formation of the miniscular dosage form and hydrophobicity of talc were the key factors observed in controlling and extending the drug release (up to 6 h) from agglomerates. Hence, the developed crystallo-co-agglomeration technique could be successfully used for the preparation of directly compressible high-strength extended-release spherical agglomerates of indapamide.

Impacts of Polymeric Additives on Nucleation and Crystal Growth of Indomethacin from Supersaturated Solutions.

Three polymers, polyvinylpyrrolidone (PVP K30), hydroxypropyl methyl cellulose (HPMC E5), and Kollidone VA64 (PVP-VA64), have been assessed for their impact on the nucleation and crystal growth of indomethacin (IND) from supersaturation solutions. PVP was the most effective inhibitor on IND nucleation among three polymers, but the effect of three polymers on inhibiting nucleation is quite limited when the degree of supersaturation S is higher than about 9. Analysis of the nucleation data by classical nucleation theory model generally afforded good data fitting with the model and showed that addition of polymers may affect the crystal/solution interfacial free energy γ and also the pre-exponential kinetic factor. PVP-VA showed better inhibitory effects on crystal growth of IND when the polymer concentration is high (0.1%, w/w) as reflected by the crystal growth inhibition factor R, and PVP exhibited relatively stronger effects on inhibiting crystal growth at low polymer concentrations (0.005%, w/w). The crystal growth inhibitory effect of polymers should be attributable to the retardation of the surface integration of the drug, and such effect should also be polymer and drug dependent. The enhancement of supersaturation level of IND should be attributable to both nucleation and crystal growth inhibition by polymers. The nucleation and crystal growth rate of α-polymorph IND is higher than that of γ-polymorph, and α-polymorph is the predominant form appeared in supersaturated solutions. A rational selection of the appropriate polymer for specific drug is critical for developing supersaturated drug delivery formulations.

Miscibility studies of plastic-mimetic polypeptide with hydroxypropylmethylcellulose blends and generation of non-woven fabrics.

In the current investigation, the results of viscometric measurements, thermal property, SEM, XRD and FTIR of the polymer blends containing synthetic plastic-based polypeptide (PLP) with hydroxypropylmethylcellulose (HPMC) on miscibility is discussed. Various interaction parameters; KH, Δ[η]m, ΔB, µ, α, ß and ΔK indicated the miscibility of polypeptide/HPMC up to 40% of the PLP in the blend at room temperature. The calorimetric results a single glass transition event for miscible systems. Further, the results were aligned with the scanning electron microscope and XRD analysis. Details concerning the nature of interactions in these systems and how they are influenced by the peptide proportion in the blends are discussed. The thermo gravimetric analysis manifested the improved thermal stability of the blends than their individual polymers. Additionally, the blend solutions were fabricated into non-woven fabrics with electrospinning technique, which may be a good candidate for pharmaceutical and biomedical applications.

Edible solid foams as porous substrates for inkjet-printable pharmaceuticals.

The aim of this study was to investigate new porous flexible substrates, i.e., solid foams that would serve as a carrier with a high ink absorption potential for inkjet printable pharmaceuticals. Propranolol hydrochloride was used as a model active pharmaceutical ingredient (API). Pharmaceutically approved and edible cellulose derivatives and gums together with different additives were evaluated as a base for the substrate. Different methods for preparation of a solid foam such as freeze-drying, vacuum oven drying and drying at room temperature were explored. Only freeze-drying of the polymeric solutions resulted in the desired porous and flexible, but mechanically stable, soft sponge-like substrates with hydroxypropyl methylcellulose (HPMC)-based solid foams being the most suitable for the use in continuous inkjet printing. The plasticized HPMC foams had a superior absorption capacity and fast penetration speed for the different solvents due to the open cell pore structure and higher porosity as compared to nonplasticized additive-free foams, although, the latter were less hygroscopic. The produced solid foams were well suited for inkjet printing of high volumes of API-containing ink. The inkjet-printed API was immediately released from the dosage forms upon contact with the dissolution medium. This work demonstrates that the fabricated solid foams, based on plasticized HPMC, show a great potential as porous carriers in the fabrication of high dose dosage forms by inkjet printing.

Novel Extended-Release Multiple-Unit System of Imidafenacin Prepared by Fluid-Bed Coating Technique.

The objective of this study was to formulate once-a-day extended-release (ER) pellet system of imidafenacin (IDN), a recently approved urinary antispasmodic agent with twice-a-day dosing regimen. The sugar sphere pellets were firstly layered with IDN and hypromellose and then coated with Eudragit RS (copolymers of acrylic and methacrylic acid esters), employed as a release modifier, using a fluid-bed coater. Solid-state characterizations using solid-state X-ray diffraction and differential scanning calorimeter indicated that the antispasmodic agent was homogeneously layered onto the pellets in an amorphous state. Drug release from multiple-unit ER system was effectively retarded in proportion to the amount of Eudragit RS in the outer layer, with a high correlation value above 0.86. In a pharmacokinetic evaluation in beagle dogs, the plasma concentration profile of IDN was markedly protracted by ER pellets, exhibiting delayed the time needed to reach the maximum drug concentration and the elimination half-life in plasma, compared to the commercial immediate release form (Uritos® tablet, Kyorin Pharmaceutical Co., Ltd., Japan). Therefore, the novel ER pellets can be a promising tool for oral IDN therapy, providing a once-a-day dosing regimen, and thus, improving patient compliance.

A novel co-processing method to manufacture an API for extended release formulation via formation of agglomerates of active ingredient and hydroxypropyl methylcellulose during crystallization.

A novel process for generating agglomerates of active pharmaceutical ingredient (API) and polymer by swelling the polymer in a water/organic mixture has been developed to address formulation issues resulting from a water sensitive, high drug load API with poor powder properties. Initially, the API is dissolved in water, following which hydroxypropyl methylcellulose (HPMC) is added, resulting in the imbibing of water, along with the dissolved API, into the HPMC matrix. The addition of acetone and isopropyl acetate (anti-solvents) then causes the API to crystallize inside and on the surface of HPMC agglomerates. The process was scaled up to 20 kg scale. The agglomerates of API and HPMC generated by this process are ∼350 µm diameter, robust, and have significantly better flow than the API as measured by Erweka flow testing. These agglomerates exhibit improved bulk density, acceptable chemical stability, and high compressibility. The agglomerates process well through roller compaction and tableting, with no flow or sticking issues. This process is potentially adaptable to other APIs with similar attributes.

Formulation, Characterization, and Optimization of Captopril Fast-Dissolving Oral Films.

This work aimed to using optimization study to formulate a patient-friendly captopril fast-dissolving oral film with satisfactory disintegration time. Films were made with pullulan and hydroxypropyl methyl cellulose (HPMC) by using the solvent-casting method. Cellulose nanofiber (CNF) was used as a compatibilizer and glycerine was used as a plasticizer. In order to find an optimum formulation, a response surface methodology and a central composite design were employed. The concentration percentages of pullulan and glycerine were considered to be the design factors. Disintegration time, tensile strength, percent elongation at break, and folding endurance were considered to be the responses. The results showed that CNF improved the compatibility and tensile strength of the pullulan and HPMC blend. Also, the rigid nature of CNF reduced the film elongation but the addition of glycerine improved its flexibility. All formulations showed an acceptable uniformity content and dissolution rate. Complete dissolution for all formulations occurred within 2 min. Films with 26% pullulan, 74% HPMC, 1% CNF, and 5% glycerine were reported to be optimum formulations for captopril fast-dissolving oral films, with 95% confidence levels. The in vivo comparison of optimized formulation with a conventional captopril sublingual tablet exhibited significant increase in AUC (~ 62%) and Cmax (~ 52%) and a major decrease in Tmax (~ 33%). The overall results showed that the captopril FDF is a promising candidate for enhanced in vivo orotransmucosal absorption.

Bulk Freeze-Drying Milling: a Versatile Method of Developing Highly Porous Cushioning Excipients for Compacted Multiple-Unit Pellet Systems (MUPS).

The compaction of multiple-unit pellet system (MUPS) is a challenging process due to the ease of coat damage under high compression pressure, thereby altering drug release rates. To overcome this, cushioning excipients are added to the tablet formulation. Excipients can be processed into pellets/granules and freeze-dried to increase their porosity and cushioning performance. However, successful formation of pellets/granules has specific requirements that limit formulation flexibility. In this study, a novel top-down approach that harnessed bulk freeze-drying milling was explored to avoid the challenges of pelletization/granulation. Aqueous dispersions containing 20%, w/w hydroxypropyl methylcellulose (HPMC), partially pregelatinised starch or polyvinylpyrrolidone alone, and with lactose (Lac) in 1:1 ratio, were freeze-dried and then milled to obtain particulate excipients for characterization and evaluation of their cushioning performance. This study demonstrated that bulk freeze-drying milling is a versatile method for developing excipients that are porous and directly compressible. The freeze-drying process modified the materials in a unique manner which could impart cushioning properties. Compared to unprocessed excipients, the freeze-dried products generally exhibited better cushioning effects. The drug release profile of drug-loaded pellets compacted with freeze-dried Lac-HPMC excipients was similar to that of the uncompacted drug-loaded pellets (f 2 value = 51.7), indicating excellent cushioning effects. It was proposed that the specific balance of brittle and plastic nature of the freeze-dried Lac-HPMC composite conferred greater protective effect to the drug-loaded pellets, making it advantageous as a cushioning excipient.

Injectable and thermally contractible hydroxypropyl methyl cellulose/Fe3O4 for magnetic hyperthermia ablation of tumors.

The development of efficient strategies for the magnetic hyperthermia ablation of tumors remains challenging. To overcome the significant safety limitations, we developed a thermally contractible, injectable and biodegradable material for the minimally invasive and highly efficient magnetic hyperthermia ablation of tumors. This material was composed of hydroxypropyl methyl cellulose (HPMC), polyvinyl alcohol (PVA) and Fe3O4. The thermal contractibility of HPMC/Fe3O4 was designed to avoid damaging the surrounding normal tissue upon heating, which was confirmed by visual inspection, ultrasound imaging and computed tomography (CT). The efficient injectability of HPMC/Fe3O4 was proven using a very small needle. The biosafety of HPMC/Fe3O4 was evaluated by MTT and biochemical assays as well as flow cytometry (FCM). All the aforementioned data demonstrated the safety of HPMC/Fe3O4. The results of in vitro and ex vivo experiments showed that the temperature and necrotic volume of excised bovine liver were positively correlated with the HPMC/Fe3O4 weight, iron content and heating duration. The in vivo experimental results showed that the tumors could be completely ablated using 0.06 ml of HPMC/60%Fe3O4 after 180 s of induction heating. We believe that this novel, safe and biodegradable material will promote the rapid bench-to-bed translation of magnetic hyperthermia technology, and it is also expected to bring a new concept for the biomaterial research field.

Preparation and Characterization of Hydroxypropyl Methylcellulose/Polycarbophil Mucoadhesive Blend Films Using a Mixture Design Approach.

The objectives of this study were to prepare the hydroxypropyl methylcellulose (HPMC)/polycarbophil (PC) mucoadhesive blend film and to investigate the main and interaction effect of HPMC and PC mixtures on the physicochemical and mechanical properties of blend films using a simplex lattice mixture design approach. The cubic and quadratic models were selected to analyze mucoadhesive properties in terms of work of adhesion and maximum detachment force, respectively. It was shown that HPMC/PC blend film had higher mucoadhesive properties than pure HPMC film. The suitable models for analyzing swelling index of blend films at various times were assessed. The puncture strength, % elongation and hydrophilicity of films were also examined. The pure HPMC film displayed more homogeneous and smoother structures compared with the blend film, as observed by scanning electron microscope and atomic force microscopy. Intermolecular hydrogen bonding between HPMC and PC was detected using Fourier transform infrared and X-ray diffraction. Therefore, the blend film shows high potential for use as a buccal delivery system.

Preparation and evaluation of HPMC-based pirfenidone solution in vivo.

CONTEXT: Pirfenidone (PFD) has exhibited therapeutic potential in the treatment of cell proliferative disorders. The previously developed 0.5% water-based PFD eye drops by our team exhibited antiscarring effectiveness and ocular safety but with a limit of short half-life and poor bioavailability. OBJECTIVE: To increase bioavailability of the water-based PFD eye drops, we prepared a viscous solution by adding hydroxypropyl methylcellulose (HPMC, F4M), which acted as a viscosity-enhancer. Subsequently, we compared the HPMC-based PFD solution with the water-based PFD eye drops. MATERIALS AND METHODS: PFD solution with 1% HPMC (w/v) was prepared, and the viscosities at different shear rates were measured to investigate its rheology. PFD concentrations in the tear, aqueous humor, conjunctiva, cornea, and sclerae of New Zealand rabbits were detected at different time points with high-performance liquid chromatography (HPLC) following single instillation of the 0.5% PFD (w/v) water-based eye drops or HPMC-based solution. RESULTS: Compared with the 0.5% water-based PFD eye drops, the HPMC-based solution increased the PFD levels in tears and prolonged the residence time from 10 to more than 20 min (p < .01). Consequently, the concentrations of PFD in aqueous humor, conjunctiva, cornea, and sclera were elevated to varying degrees until 90 min after topical administration. CONCLUSIONS: The developed formulation possesses a same readily administration and simple preparation as the PFD eye drops; however, the HPMC-based solution exhibited the higher bioavailability.

Continuous twin screw granulation of controlled release formulations with various HPMC grades.

HPMC is a popular matrix former to formulate tablets with extended drug release. Tablets with HPMC are preferentially produced by direct compression. However, granulation is often required prior to tableting to overcome poor flowability of the formulation. While continuous twin screw granulation has been extensively evaluated for granulation of immediate release formulations, twin screw granulation of controlled release formulations including the dissolution behavior of the formulations received little attention. Therefore, the influence of the HPMC grade (viscosity and substitution degree) and the particle size of theophylline on critical quality attributes of granules (continuously produced via twin screw granulation) and tablets was investigated in the current study. Formulations with 20 or 40% HPMC, 20% theophylline and lactose were granulated with water at fixed process parameters via twin screw granulation. The torque was influenced by the viscosity and substitution degree of HPMC, but was not a limiting factor for the granulation process. An optimal L/S ratio was selected for each formulation based on the granule size distribution. The granule size distributions were influenced by the substitution degree and concentration of HPMC and the particle size of theophylline. Raman and UV spectroscopic analysis on 8 sieve fractions of granules indicated an inhomogeneous distribution of theophylline over the size fractions. However, this phenomenon was not correlated with the hydration rate or viscosity of HPMC. Controlled release of theophylline could be obtained over 24h with release profiles close to zero-order. The release of theophylline could be tailored via selection of the substitution degree and viscosity of HPMC.

Synthesis of surfactant-free hydroxypropyl methylcellulose nanogels for controlled release of insulin.

A facile controlled-release nanogels delivery system has been developed by using hydroxypropyl methylcellulose (HPMC) hybrid nanogels as encapsulation shell materials, which were synthesized by surfactant-free polymerization in aqueous solution. The effects of reaction time and cross-linker concentration on the size of the nanogels have been studied. The results showed that in a certain range, the particle size decreased with increasing reaction time and increasing concentration of cross-linker. Meanwhile, at the feeding ratio 0.05/1 of HPMC/methacrylic acid (MAA), the LCST of prepared nanogels at pH=6 was close to the body temperature, which can be used as sustained insulin delivery system. Besides, the HPMC nanogels loaded with insulin had a high drug loading of 21.3% and a high entrapment efficiency of 95.7%. The release behavior of the insulin nanogels can be adjusted by pH and temperature which will have potential applications in controlled release delivery system.