Optimization of Hypericum Perforatum Microencapsulation Process by Spray Drying Method.

Hypericum perforatum (HP) contains valuable and beneficial bioactive compounds that have been used to treat or prevent several illnesses. Encapsulation technology offers protection of the active compounds and facilitates to expose of the biologically active compounds in a controlled mechanism. Microcapsulation of the hydroalcoholic gum arabic and maltodextrin have hot been used as wall materials in the encapsulation of HP extract. Therefore, the optimum microencapsulation parameters of Hypericum perforatum (HP) hydroalcoholic extract were determined using response surface methodology (RSM) for the evaluation of HP extract. Three levels of three independent variables were screened using the one-way ANOVA. Five responses were monitored, including total phenolic content (TPC), 2,2-Diphenyl-1-picrylhydrazyl (DPPH), carr index (CI), hausner ratio (HR), and solubility. Optimum drying conditions for Hypericum perforatum microcapsules (HPMs) were determined: 180 °C for inlet air temperature, 1.04/1 for ratio of maltodextrin to gum arabic (w/w), and 1.98/1 for coating to core material ratio (w/w). TPC, antioxidant activity, CI, HR, and solubility values were specified as 316.531 (mg/g GAE), 81.912%, 6.074, 1.066, and 35.017%, respectively, under the optimized conditions. The major compounds of Hypericum perforatum (hypericin and pseudohypericin) extract were determined as 4.19 µg/g microcapsule and 15.09 µg/g microcapsule, respectively. Scanning electron microscope (SEM) analysis revealed that the mean particle diameter of the HPMs was 20.36 µm. Based on these results, microencapsulation of HPMs by spray drying is a viable technique which protects the bioactive compounds of HP leaves, facilitating its application in the pharmaceutical, cosmetic, and food industries.

Estimation of moisture content in dry-cured beef ham by measuring the impedance of the surface.

Dry-cured beef ham quality is determined by moisture content; however, it is hard to do non-destructive monitoring. We investigated whether the internal moisture content of dry-cured beef ham could be determined from the impedance of the surface, which is removed at the time of eating. Supraspinatus muscle samples from Japanese Shorthorn steers were dried for different periods. The samples were then divided into the parts to be removed (surface) and edible parts. Their respective impedance and moisture content were measured, and the correlation between these two parameters was investigated. A negative correlation was observed between the impedance and moisture content of the surface and the shallow and deep sections of the edible part. There was also a negative correlation between the impedance of the surface and the moisture content of the shallow and deep sections of the edible part. Therefore, the results of this study indicate that during drying, the moisture content in the shallow and deep sections of dry-cured hams can be estimated by measuring the impedance of the surface. This non-destructive method of measuring the moisture content of dry-cured hams can help in regulating the moisture content during drying to produce high-quality dry-cured hams.

Influence of Drying Temperatures on Color Variation, Phenolic Compounds and Multi-Elemental Composition of Some Culinary- Medicinal Mushrooms.

Although mushrooms are widely used for nutraceutical purposes, post-harvest storage is extremely crucial to avoid degradation and quality reduction in fresh mushrooms. Drying treatments are commonly applied in the mushroom industry to extend shelf life. Drying may cause instability of food quality and antioxidant parameters due to unsuitable drying temperatures. Therefore, in this research a common set of temperatures typically used by mushroom growers was applied (50°C, 60°C, 70°C) to Ganoderma lucidum, Lignosus rhinocerus, Auricularia auricula-judae, and Schizophyllum commune to analyze color changes and concentration of elements and phenolic compounds. Mushrooms were chosen based on commonly cultivated species among growers. L. rhinocerus dried at 70°C indicated significantly lower L* (78.90) compared to control (89.94). Element retention in each sample differed depending on the species. The amount of calcium was significantly higher in L. rhinocerus (11,893 mg/kg) and A. auricula-judae (10,941.81 mg/kg) when dried at 60°C. Drying at 70°C resulted in significantly higher magnesium for Sch. commune (13,054.38 mg/kg) and A. auricula-judae (80,56.92 mg/kg). Higher levels of iron and manganese were observed in Sch. commune dried at 70°C (216.54 and 10.02 mg/kg, respectively). Gallic acid had significantly higher retention at 50°C for A. auricula-judae and G. lucidum. Meanwhile, L. rhinocerus and Sch. commune showed significantly higher gallic acid at 60°C. It is evident from these results that temperature does affect the food quality and elemental parameters during the drying process for each mushroom.

Effect of drying methods on aroma, taste and antioxidant activity of Dendrobium officinale flower tea: A sensomic and metabolomic study.

Dendrobium officinale flower tea (DFT) is a traditional health product of geographical identity known for its unique aroma and taste. The effects of different drying methods on sensory properties, metabolic profiles and antioxidant activity of DFT were compared using sensomics and metabolomics approaches. Twenty-seven aroma-active compounds were identified and more than half of the volatiles responsible for the "green" and "floral" scent lost after drying. Sensory evaluations revealed that vacuum freeze-dried DFT showed a significant preference in taste and fifty-eight metabolites with higher levels of glutamine were observed, possibly contributing to a "fresh" taste and increased preference. Among the three drying methods, natural air drying retained the fresh flower scent better, while freeze drying preserved the color and shape of the flowers better and enhanced the taste and antioxidant activity of DFT. The research results may provide a foundation for the selection of DFT processing method and quality detection.

Electrostatic spray drying: A new alternative for drying of complex coacervates.

Complex coacervation can be used for controlled delivery of bioactive compounds (i.e., flaxseed oil and quercetin). This study investigated the co-encapsulation of flaxseed oil and quercetin by complex coacervation using soluble pea protein (SPP) and gum arabic (GA) as shell materials, followed by innovative electrostatic spray drying (ES). The dried system was analyzed through encapsulation efficiency (EE) and yield (EY), morphological and physicochemical properties, and stability for 60 days. Small droplet size emulsions were produced by GA (in the first step of complex coacervation) due to its greater emulsifying activity than SPP. Oil EY and EE, moisture, and water activity in dried compositions ranged from 75.7 to 75.6, 76.0-73.4 %, 3.4-4.1 %, and 0.1-0.2, respectively. Spherical microcapsules were created with small and aggregated particle size but stable for 60 days. An amount of 8 % of quercetin remained in the dried coacervates after 60 days, with low hydroperoxide production. In summary, when GA is used as the emulsifier and SPP as the second biopolymer in the coacervation process, suitable coacervates for food applications are obtained, with ES being a novel alternative to obtain coacervates in powder, with improved stability for encapsulated compounds. As a result, this study helps provide a new delivery system option and sheds light on how the characteristics of biopolymers and the drying process affect coacervate formation.

Comparative near Infrared (NIR) spectroscopy calibrations performance of dried and undried forage on dry and wet matter bases.

The application of Near Infrared (NIR) spectroscopy for analyzing wet feed directly on farms is increasingly recognized for its role in supporting harvest-time decisions and refining the precision of animal feeding practices. This study aims to evaluate the accuracy of NIR spectroscopy calibrations for both undried, unprocessed samples and dried, ground samples. Additionally, it investigates the influence of the bases of reference data (wet vs. dry basis) on the predictive capabilities of the NIR analysis. The study utilized 492 Corn Whole Plant (CWP) and 405 High Moisture Corn (HMC) samples, sourced from various farms across Italy. Spectral data were acquired from both undried, unground and dried, ground samples using laboratory bench NIR instruments, covering a spectral range of 1100 to 2498 nm. The reference chemical composition of these samples was analyzed and presented in two formats: on a wet matter basis and on a dry matter basis. The study revealed that calibrations based on undried samples generally exhibited lower predictive accuracy for most traits, with the exception of Dry Matter (DM). Notably, the decline in predictive performance was more pronounced in highly moist products like CWP, where the average error increased by 60-70%. Conversely, this reduction in accuracy was relatively contained (10-15%) in drier samples such as HMC. The Standard Error of Cross-Validation (SECV) values for DMres, Ash, CP, and EE were notably low, at 0.39, 0.30, 0.29, 0.21% for CWP and 0.49, 0.14, 0.25, 0.14% for HMC, respectively. These results align with previous studies, indicating the reliability of NIR spectroscopy in diverse moisture contexts. The study attributes this variance to the interference caused by water in 'as is' samples, where the spectral features predominantly reflect water content, thereby obscuring the spectral signatures of other nutrients. In terms of calibration development strategies, the study concludes that there is no significant difference in predictive performance between undried calibrations based on either 'dry matter' or 'as is' basis. This finding emphasizes the potential of NIR spectroscopy in diverse moisture contexts, although with varying degrees of accuracy contingent upon the moisture content of the analyzed samples. Overall, this research provides valuable insights into the calibration strategies of NIR spectroscopy and its practical applications in agricultural settings, particularly for on-farm forage analysis.

Comparison of different drying technologies for kiwifruit pomace: Changes in physical characteristics, nutritional properties and antioxidant capacities.

The objective of this study was to evaluate the impacts of different drying technologies including microwave drying (MD), vacuum microwave drying (VMD), sun drying (SD), vacuum drying (VD), hot air drying (HAD), and vacuum freeze drying (VFD) on the physical characteristics, nutritional properties and antioxidant capacities of kiwifruit pomace in order to realize by-product utilization and improve energy efficiency. Results showed that both MD and VMD significantly reduced drying time by >94.6%, compared to traditional thermal drying which took 14-48 h. MD exhibited the highest content of soluble dietary fiber (9.5%) and the lowest energy consumption. Furthermore, VMD resulted in the highest content of vitamin C (198.78 mg/100 g) and reducing sugar (73.78%), and the antioxidant capacities ranked only second to VFD. Given the financial advantages and product quality, VMD was suggested to be advantageous technology in actual industrial production.

Image recognition technology provides insights into relationships between anthocyanin degradation and color variation during jet drying of black carrot.

To identify interesting relationships between anthocyanin degradation and color variation during food processing, black carrot slice (BCS) was dried by air-impingement jet drying (AIJD) and hot air drying (HAD). AIJD was a better technology for drying BCS than HAD. Results of colorimeter determination showed that the color of BCS was significantly changed during AIJD at 50, 60 and 70 °C. UHPLC-QqQ-MS/MS analysis found that AIJD-induced degradations of main BCS anthocyanins, cyanidin-3-xylosyl(feruloylglucosyl)galactoside and cyanidin-3-xylosyl(sinapoylglucosyl)galactoside, belonged to non-spontaneous endothermic reactions, which followed the 0.5- and 1-order kinetic equations, respectively. Anthocyanin content and colors obtained from colorimeter presented strong positive correlation, particularly the a* and chroma values. We further developed a Python script based on image recognition technology to visualize the correlation matrixes between the anthocyanin contents and colors of BSC images. The plots revealed that strong positive correlations between anthocyanins and colors primarily concentrated in the sample's periphery following a concentric pattern.

Comparison of dehydration systems in quality and chemical effects on sunflower seeds.

The present work investigates the quality and the chemical effects of dehydration, using a novel dehydration system based on an electromagnetic induction and low pressures technique, comparing it with the thermo-solar drying system. High oleic sunflower seeds, which are an important oil seed crop, were used due to the fact that they have a special place in the food industry. The seed samples were exposed to electromagnetic induction and low pressures by 0.5 and 1 h, then several chemical characterizations were carried out, in the electrophoresis study, it was found that most proteins in the hull were degraded or denatured, some of them were lost during the time in the thermosolar dryer while in kernel keeps 94.9% of the concentration in control proteins. Otherwise, the electromagnetic induction dryer did not lose the most of proteins in the kernel keeping 99.1% in 0.5 h and 98.4% in 1 h, just degrading its concentration. Germination viability results did not show changes after 0.5 h in the electromagnetic fields, but they decreased in 1 h from 66 to 40% until the thermosolar method fell to 24% in 4 h, both analysis results change proportionally with the treatment time and moisture content and the amount of the oxygen.

Tardigrade secretory proteins protect biological structures from desiccation.

Tardigrades, microscopic animals that survive a broad range of environmental stresses, express a unique set of proteins termed tardigrade-specific intrinsically disordered proteins (TDPs). TDPs are often expressed at high levels in tardigrades upon desiccation, and appear to mediate stress adaptation. Here, we focus on the proteins belonging to the secreted family of tardigrade proteins termed secretory-abundant heat soluble ("SAHS") proteins, and investigate their ability to protect diverse biological structures. Recombinantly expressed SAHS proteins prevent desiccated liposomes from fusion, and enhance desiccation tolerance of E. coli and Rhizobium tropici upon extracellular application. Molecular dynamics simulation and comparative structural analysis suggest a model by which SAHS proteins may undergo a structural transition upon desiccation, in which removal of water and solutes from a large internal cavity in SAHS proteins destabilizes the beta-sheet structure. These results highlight the potential application of SAHS proteins as stabilizing molecules for preservation of cells.

Mechanisms insights into Cd passivation in soil by lignin biochar: Transition from flooding to natural air-drying.

Biochar shows great potential in soil cadmium pollution treatment, however, the effect and mechanisms of biochar on cadmium passivation (CP) during the long-term process of soil from flooding to natural air-drying are not clear. In this study, a 300-day experiment was conducted to keep the flooded water level constant for the first 100 days and then dried naturally. Mechanisms of CP by lignin biochar (LBC) were analyzed through chemical analysis, FTIR-2D-COS, EEMs-PARAFAC, ultraviolet spectroscopy characterizations, and microbial community distribution of soil. Results showed that application of LBC results in rapid CP ratio in soil within 35 days, mainly in the residual and Fe-Mn bound states (total 72.80%). CP ratio further increased to 90.89% with water evaporation. The CP mechanisms include precipitation, electrostatic effect, humus complexation, and microbial remediation by promoting the propagation of fungi such as Penicillium and Trichoderma. Evaporation of water promoted the colonization of aerobic microorganisms and then increased the degree of soil humification and aromatization, thereby enhancing the cadmium passivation. Simultaneously, the biochar could reduce the relative abundance of plant pathogens in soil from 1.8% to 0.03% and the freshness index (ß/α) from 0.64 to 0.16, favoring crop growth and promoting carbon sequestration and emission reduction.

Historical evolution and processing mechanism of 'nine steaming and nine drying' of traditional Chinese medicine preparation.

CONTEXT: Nine steaming and nine drying is a traditional Chinese medicine (TCM) processing method and it is widely used for processing tonifying herbs. Modern research reveals that the repeated steaming and drying process varies the composition and clinical efficacy of TCM. OBJECTIVE: This paper analyzes and explores the historical evolution, research progress, development strategies, and problems encountered in the nine steaming and nine drying process so as to provide a reasonable explanation for this method. METHODS: English and Chinese literature from 1986 to 2023 was collected from databases including Web of Science, PubMed, Elsevier, Chinese Pharmacopoeia 2020 (CP), and CNKI (Chinese). Nine steaming and nine drying, processing, TCM and pharmacological activity were used as the key words. RESULTS: Nine steaming and nine drying has undergone thousands of years of clinical practice. Under specific processing conditions of nine steaming and nine drying, the ingredients of the TCM have significant changes, which in turn altered clinical applications. CONCLUSIONS: This review provides sufficient evidence to prove the rationality and scientific value of nine steaming and nine drying and puts forward a development direction for future research.

Impact of Prebiotic on Viability of Lactiplantibacillus plantarum D-2 by Encapsulation through Spray Drying and Its Commercialization Potential.

This study investigated the impact of inulin (INL) on viability of L. plantarum D-2 (LPD2) by encapsulation through spray drying (SD) and its commercialization potential to alternative of conventional wall material maltodextrin (MD). LPD2, derived from sea tangle (Saccharina japonica) kimchi, is probiotics exhibiting significant attributes like cholesterol reduction, antioxidant properties, and resilience to acidic and bile environments. To enhance storage viability and stability of LPD2, encapsulation was applied by SD technology. The optimum encapsulation condition with MD was 10% MD concentration (MD10) and inlet temperature (96°C). The optimum concentration ratio of MD and INL was 7:3 (INL3) for alternative of MD with similar encapsulation yield and viability of LPD2. Viability of LPD2 with INL3 exhibited almost 8% higher than that with MD10 after 50 days storage at 25°C. Physicochemical characteristics of the encapsulated LPD2 (ELPD2) with MD10 and INL3 had no significant different between flowability and morphology. But, ELPD2 with INL3 had lower water solubility and higher water absorption resulting in extension of viability of LPD2 compared to that with MD10. The comprehensive study results showed that there was no significant difference in the encapsulation yield and physicochemical properties between ELPD2 with MD10 and INL3, except of water solubility index (WSI) and water absorption index (WAI). INL have the potential to substitute of MD as a commercial wall material with prebiotic functionality to enhance the viability of LPD2 by encapsulation.

Autophagy functions as a cytoprotective mechanism by regulating programmed cell death during desiccation in Syntrichia caninervis.

Desiccation is a state of extreme water loss that is lethal to many plant species. Some desert plants have evolved unique strategies to cope with desiccation stress in their natural environment. Here we present the remarkable stress management mechanism of Syntrichia caninervis, a desert moss species which exhibits an 'A' category of desiccation tolerance. Our research demonstrated that desiccation stress triggers autophagy in S. caninervis while inhibiting Programmed Cell Death (PCD). Silencing of two autophagy-related genes, ATG6 and ATG2, in S. caninervis promoted PCD. Desiccation treatment accelerated cell death in ATG6 and ATG2 gene-silenced S. caninervis. Notably, trehalose was not detected during desiccation, and exogenous application of trehalose cannot activate autophagy. These results suggested that S. caninervis is independent of trehalose accumulation to triggered autophagy. Our results showed that autophagy function as prosurvival mechanism to enhance desiccation tolerance of S. caninervis. Our findings enrich the knowledge of the role of autophagy in plant stress response and may provide new insight into understanding of plant desiccation tolerance.

Effectiveness of biological drying for citric acid dewatered sludge: Evaluating the impact of energy-efficient ventilation strategies.

The effectiveness of dehydration and utilization processes for citric acid dewatered sludge is hampered by its high concentrations of polysaccharides, proteins, and water-binding properties of microbial extracellular polymers (EPS). This research explores the efficacy and mechanisms involved in extracting water from this type of sludge using biological drying technology, with varying rates of ventilation. Especially pertinent was the use of low ventilation rates as control variables. Our results suggest that a scheduled intermittent ventilation at lower rates allows for the most efficient removal of water, achieving a rate of 41.71 % within eight days, according to the zero-order kinetic model. Remarkably, the peak temperature registered was 60 °C, reaching this threshold in just 0.1 days and maintaining high temperatures for approximately 5.9 days. Component analysis of organic matter illustrated a preferential degradation process for lipids under these ventilation conditions which is pivotal for releasing and transforming bound water for efficient extraction, as well as facilitating the breakdown of easily hydrolysable materials. Further, polysaccharide/protein (EPS) decomposition contributed to water removal, though less significantly. The periodic ventilation strategy allowed for the maximum cumulative temperature to be sustained, demonstrating superior efficiency in harnessing bio-generated heat (82.77 % for water evaporation), resulting in dry sludge suitable for self-sustained combustion at relatively low cost ($26.61/t). Highlighted by this study is the considerable potential of energy-efficient ventilation methods in the biological drying treatment of citric acid fermented sludge and similar industrial waste materials.

Functional characterization of two DH44R genes associated with starvation and desiccation in Rhopalosiphum padi (Hemiptera: Aphididae).

CRF-like diuretic hormone receptor (CRF/DHR), also known as DH44R in insects, are G-protein coupled receptors (GPCRs) that play a role in regulating osmotic balance in various insect species. These receptors have the potential to be targeted for the development of insecticides. However, our understanding of the role of DHR genes in aphids, including Rhopalosiphum padi, a major wheat pest, is currently limited. In this study, we isolated and characterized two R. padi DHRs (RpDHR1 and RpDHR2). The expression levels of RpDHR1 increased after starvation and were restored after re-feeding. The expression levels of RpDHR1 gene decreased significantly 24 h after injection of dsRNA targeting the gene. Knockdown of RpDHR1 increased aphid mortality under starvation conditions (24, 36, 48 and 60 h). Under starvation and desiccation condition, the aphid mortality decreased after knockdown of RpDHR1. This is the first study to report the role of DHR genes in the starvation and desiccation response of aphids. The results suggest that RpDHR1 is involved in the resistance of R. padi to starvation and dehydration, making it a potential target for insecticide development. Novel insecticides could be created by utilizing DHR agonists to disrupt the physiological processes of insect pests.

Physicochemical and sensorial properties of tomato leathers at different drying conditions.

Tomato leather as a healthy alternative to traditional fruit leathers was formulated. A tray dryer with changing temperature (50, 60, and 70°C) and relative humidity (5%, 10%, and 20%) was used to achieve the best product in terms of color, water distribution, lycopene content, mechanical, and sensorial properties. Color change was the highest at 70°C due to the Maillard reaction. Lycopene content was also the highest at 70°C. Time domain-NMR relaxometry showed that water distribution of all samples was homogeneous and similar to each other. Processing conditions affected mechanical properties significantly. The highest tensile strength was observed at 70°C, possibly due to the denatured proteins. Sensory analysis indicated better flavor development at 70°C, whereas overall acceptability of samples was higher at 50°C. The results of this study showed the main processing parameters of tomato leather with a minimal amount of ingredients, with acceptable mechanical and sensorial properties. PRACTICAL APPLICATION: Tomato leather was produced by using minimal amount of ingredients. Taste of the leather was found acceptable, as a salty snack food. Therefore, this product can be produced economically and it has a high potential to be consumed as an alternative to conventional fruit leathers.

A study into how thickness, infrared intensity, and airflow affect drying kinetics, modeling, activation energy, and quality attributes of apple slices using infrared dryer.

Drying is a widely recognized process that reduces the need for storage and shipping weight, keeps free water out of the product, and prolongs its shelf life. An infrared dryer was designed to dry apples under different drying conditions. Apple slices of 6-, 4-, and 2-mm thicknesses were dried at intensities 0.130, 0.225, and 0.341 W/cm2 and airflow 1.0, 0.5, and 1.5 m/s. The dehydrating period was prolonged with higher airflow and shortened with higher infrared intensity (IR). The shortest dehydrating period was verified by 190 min at 0.341 W/cm2, 0.5 m/s under 2 mm thickness. Increasing the sample thickness from 2 to 4 mm and then to 6 mm resulted in an 84% and 192% increase in drying time, respectively. Dehydrated apples had water activity values ranging from 0.30 to 0.40. The shrinkage ratio increased with an increase in infrared radiation intensity. However, it decreased with an increase in air velocity, while the rehydration ratio decreased with an increase in radiation intensity and increased with an increase in air velocity. Regarding total color change, apple slice thickness was a major factor. The effective diffusivities varied between 2.6 and 9.0 𝗑10-10 m2/s under different drying conditions. The dehydrating curves of apples were best described by the model developed by Midilli et al.

Spray-drying of PEI-/PPI-based nanoparticles for DNA or siRNA delivery.

Spray-drying of nucleic acid-based drugs designed for gene therapy or gene knockdown is associated with many advantages including storage stability and handling as well as the possibility of pulmonary application. The encapsulation of nucleic acids in nanoparticles prior to spray-drying is one strategy for obtaining efficient formulations. This, however, strongly relies on the definition of optimal nanoparticles, excipients and spray-drying conditions. Among polymeric nanoparticles, polyethylenimine (PEI)-based complexes with or without chemical modifications have been described previously as very efficient for gene or oligonucleotide delivery. The tyrosine-modification of linear or branched low molecular weight PEIs, or of polypropylenimine (PPI) dendrimers, has led to high complex stability, improved cell uptake and transfection efficacy as well as high biocompatibility. In this study, we identify optimal spray-drying conditions for PEI-based nanoparticles containing large plasmid DNA or small siRNAs, and further explore the spray-drying of nanoparticles containing chemically modified polymers. Poly(vinyl alcohol) (PVA), but not trehalose or lactose, is particularly well-suited as excipient, retaining or even enhancing transfection efficacies compared to fresh complexes. A big mesh size is critically important as well, while the variation of the spray-drying temperature plays a minor role. Upon spray-drying, microparticles in a âˆ¼ 3.3 - 8.5 µm size range (laser granulometry) are obtained, dependent on the polymers. Upon their release from the spray-dried material, the nanoparticles show increased sizes and markedly altered zeta potentials as compared to their fresh counterparts. This may contribute to their high efficacy that is seen also after prolonged storage of the spray-dried material. We conclude that these spray-dried systems offer a great potential for the preparation of nucleic acid drug storage forms with facile reconstitution, as well as for their direct pulmonary application as dry powder.

Effect of the Drying Method and Storage Conditions on the Quality and Content of Selected Bioactive Compounds of Green Legume Vegetables.

This study aimed to determine the effect of the drying method (freeze-drying, air-drying), storage period (12 months), and storage conditions (2-4 °C, 18-22 °C) applied to two legume species: green beans and green peas. The raw and dried materials were determined for selected physical parameters typical of dried vegetables, contents of bioactive components (vitamin C and E, total chlorophyll, total carotenoids, ß-carotene, and total polyphenols), antioxidative activity against the DPPH radical, and sensory attributes (overall quality and profiles of color, texture, and palatability). Green beans had a significantly higher content of bioactive components compared to peas. Freeze-drying and cold storage conditions facilitated better retention of these compounds, i.e., by 9-39% and 3-11%, respectively. After 12 months of storage, higher retention of bioactive components, except for total chlorophyll, was determined in peas regardless of the drying method, i.e., by 38-75% in the freeze-dried product and 30-77% in the air-dried product, compared to the raw material.