LC-MS/MS methods for the determination of 30 quaternary ammonium compounds including benzalkonium and paraquat in human serum and urine.

Benzalkyldimethylammonium (or benzalkonium; BACs), alkyltrimethylammonium (ATMACs), and dialkyldimethylammonium compounds (DDACs) have been widely used for over six decades as disinfectants, especially during the COVID-19 pandemic. Here we describe methods for the determination of 7 BACs, 6 ATMACs, 6 DDACs, 8 BAC metabolites, and the structurally similar quaternary ammonium compound (QAC) herbicides diquat, paraquat, and difenzoquat in human serum and urine using liquid chromatography-tandem mass spectrometry (LC-MS/MS). The methods were optimized using isotopically labelled internal standards and solid-phase extraction with weak cation-exchange cartridges. We separated diquat and paraquat chromatographically using a mixed-mode LC column, and BACs, ATMACs, DDACs, difenzoquat, and BAC metabolites using reversed-phase (C8 and C18) LC columns. Method limits of detection (MLODs) and quantification (MLOQs) were 0.002-0.42 and 0.006-1.40 ng/mL, respectively. Recoveries of all analytes fortified at 1, 5, and 20 ng/mL concentrations in serum and urine matrices were 61-129%, with standard deviations of 0-20%. Repeated analysis of similarly fortified serum and urine samples yielded intra-day and inter-day variations of 0.22-17.4% and 0.35-17.3%, respectively. Matrix effects for analytes spiked into serum and urine matrices ranged from -27% to 15.4%. Analysis of real urine and serum samples revealed the presence of several QACs in human serum. Although no parent BACs were found in urine, we detected, for the first time, several ω-hydroxy and ω-carboxylic acid metabolites of BACs at average concentrations in the range of 0.05-0.35 ng/mL. The developed method is suitable for application in large-scale biomonitoring of human exposure to QACs and their metabolites in human serum and urine.

[Simultaneous determination of paraquat and diquat in plasma and urine by ion chromatography-triple quadrupole mass spectrometry].

Paraquat (PQ) and diquat (DQ) are widely used as non-selective contact herbicides. Several cases involving accidents, suicide, and homicide by PQ or DQ poisoning have been reported. Poising by PQ, which is mainly concentrated in the lungs, causes acute respiratory distress syndrome and leads to multiple organ toxicity. The toxic effects of DQ are similar to those of PQ but relatively less intense. The mortality rates in PQ and DQ poisoning are high. Simultaneous monitoring of the PQ and DQ concentrations in plasma and urine can provide valuable information for early clinical diagnosis and prognosis. High performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) is the main analytical method used to detect PQ and DQ in plasma and urine. As both these compounds are highly polar and water soluble, they cannot be retained effectively on a reversed-phase column with conventional mobile phases. The separation of PQ and DQ by ion-pair chromatography or hydrophilic chromatography has been reported. The use of an ion-pairing reagent helps in improving the retention capabilities of PQ and DQ. However, the sensitivity of MS detection is noticeably decreased because of ion suppression caused by the ion-pairing reagent in the mobile phase; furthermore, ion-pairing reagents may contaminate the MS system. The separation of PQ and DQ by hydrophilic chromatography is easily affected by matrix components in the sample, and their retention times are not stable. Considering PQ and DQ are bicharged cation species in solution, they are more suitable for separation by cation-exchange chromatography. A method based on ion chromatography-triple quadrupole mass spectrometry was established for the determination of PQ and DQ in plasma and urine. The plasma and urine samples were diluted with water, and then purified on a solid-phase extraction column containing a polymer-reversed phase and weak ion-exchange mixed-mode adsorbent (Oasis WCX). PQ and DQ were separated on an IonPac CS 18 analytical column (250 mm×2.0 mm, 6.0 µm) with gradient elution using a methylsulfonic acid solution electrolytically generated from an on-line eluent generation cartridge. An in-line suppressor was used to remove methylsulfonate and other anions from the eluent before the eluent entered the mass spectrometer. Between the suppressor and the ion source in MS, the addition of 3% (v/v) formic acid in acetonitrile as an organic modifier (using an auxiliary pump and a T-piece) aided desolvation in the ion source, resulted in a one-or two-fold improvement of the response, and eliminated the residual effects of the adsorption of PQ and DQ caused by ion source. The analytes were detected by triple quadrupole tandem mass spectrometry using positive electrospray ionization in the multiple reaction monitoring (MRM) mode. PQ-d8 and DQ-d4 were used as internal standards. The calibration curves for PQ and DQ showed good linear relationships in the ranges of 1.0-150 µg/L and 0.5-75 µg/L, respectively, and the correlation coefficients were > 0.999. The average matrix effects of PQ and DQ in plasma were 84.2%-89.3% and 84.7%-91.1%, while the average matrix effects of PQ and DQ in urine were 50.3%-58.4% and 51.9%-59.4%. The average recoveries of PQ and DQ in plasma were 93.5%-117% and 91.7%-112%, respectively, with relative standard deviations (RSDs) of 3.4-16.7% and 2.8%-13.2%, and that in urine were 90.0%-118% and 99.2%-116%, with relative standard deviations of 5.6%-14.9% and 2.4%-17.3% (n=6). The limits of detection of PQ and DQ in plasma and urine were 0.3 µg/L and 0.2 µg/L, respectively, with the corresponding limits of quantification being 1.0 µg/L and 0.5 µg/L. This method is sensitive and accurate, and it can be used to determine PQ and DQ for clinical diagnosis and prognosis in patients.

Fabrication of benzenesulfonic acid groups modified magnetic microspheres as an MSPE adsorbent for fast determination of paraquat and diquat in human urine combined with UPLC-HRMS.

In this study, novel benzenesulfonic acid groups modified magnetic microspheres (Fe3O4@SiO2@poly(4-VB)) were synthesized and characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier-transform infrared spectrometry (FTIR), and vibrating sample magnetometer (VSM). The as-prepared Fe3O4@SiO2@poly(4-VB) was employed as a magnetic-phase extraction (MSPE) adsorbent for rapid determination of paraquat (PQ) and diquat (DQ) in human urine samples coupled with ultra-high performance liquid chromatography-high resolution mass spectrometry (UPLC-HRMS). Moreover, this paper had expounded systematically the mass spectrum cracking mechanisms of PQ and DQ. And a zwitterionic functionalized SIELC Obelisc R column was employed for separation and retention of the above two polar herbicides using 50 mmol/L ammonium formate (pH = 3.7)-acetonitrile as the mobile phase. Besides, the adsorption and desorption conditions of Fe3O4@SiO2@poly(4-VB) toward PQ and DQ were optimized in spiking urine samples to obtain the best adsorption and desorption efficiencies. And the adsorption mechanisms of Fe3O4@SiO2@poly(4-VB) toward PQ and DQ referred to synergetic effect of electrostatic attraction and π-π interaction. Under the optimal conditions, the inter-day and intra-day spiking recoveries of the proposed method were in the range of 86.7-109.9% with RSDs less than 10%. The limits of detection (LODs) were obtained by spiking in blank urine samples at a series of low concentrations and were found to be 0.12 µg/L and 0.14 µg/L for PQ and DQ, respectively, which were lower than the comparing literatures. The developed analytical method was proven to be simple, rapid, sensitive, and accurate for clinical poisoning analysis.

Intoxicação por diquat / Diquat intoxication

O paraquat e o diquat são herbicidas de contacto do grupo dos bipiridilos, utilizados largamente para controlo de ervas daninhas. A importância deste grupo de herbicidas reside na sua utilização frequente para fins suicidas e pela inexistência de antídoto ou tratamento médico específico. O envenenamento com diquat é muito menos comum que com o paraquat e por isso existem poucos casos descritos na literatura. A dose letal de ambos é sobreponível, contudo o diquat é considerado menos tóxico devido ao menor dano pulmonar. Por outro lado, o diquat tem efeitos tóxicos graves sobre o sistema nervoso central. Por este motivo os sinais de neurotoxicidade pelo diquat são os mais relevantes e incluem sinais de parkinsonismo. O rim é a principal via excretora do diquat e a necrose tubular aguda é a lesão tipicamente identificada. A sobrevida depende de dois fatores: a concentração da substância no plasma e o tempo após a ingestão. O tratamento centra-se em três pontos essenciais: prevenção da absorção, rápida excreção e modificação dos efeitos tecidulares. A hemoperfusão é mais eficaz na clearance do diquat do que a hemodiálise e a sua utilização nas primeiras 12 horas de intoxicação pode reduzir a mortalidade.

Paraquat and diquat are contact herbicides from bipyridyl group, commonly used in weed control. The importance of this herbicide group is due to its frequent use with suicidal purpose and because there is neither an antidote nor a specific treatment. Poisoning with diquat is much less common that with paraquat, so there are few cases published in literature. The lethal dose of both is similar, however diquat is considered less toxic because it causes less lung damage. On the other side, diquat has severe toxic effects on central nervous system and neurotoxic signs are the more relevant, and include Parkinsonism. The kidney is the main excretory pathway of diquat and acute tubular necrosis is typical. Survival depends on two factors: plasma concentration and time of ingestion. Treatment focus in three key points: preventing absorption, rapid excretion and tissue effects. Hemoperfusion is more effective in diquat clearance than haemodialysis and its use in first 12 hours can reduce mortality.

Simultaneous Determination and Quantitation of Paraquat, Diquat, Glufosinate and Glyphosate in Postmortem Blood and Urine by LC-MS-MS.

A simple method, incorporating protein-precipitation/organic backwashing and liquid chromatography-tandem mass spectrometry (LC-MS-MS), has been successfully developed for the simultaneous analysis of four highly water-soluble and less volatile herbicides (paraquat, diquat, glufosinate and glyphosate) in ante- and postmortem blood, urine and gastric content samples. Respective isotopically labeled analogs of these analytes were adopted as internal standards. Acetonitrile and dichloromethane were used for protein precipitation and organic solvent backwashing, respectively, followed by injecting the upper aqueous phase into the LC-MS-MS system. Chromatographic separation was achieved using an Agilent Zorbax SB-Aq analytical column, with gradient elution of 15 mM heptafluorobutyric acid and acetonitrile. Mass spectrometric analysis was performed under electrospray ionization in positive-ion multiple reaction monitoring mode. The precursor ions and the two transition ions (m/z) adopted for each of these four analytes were paraquat (185; 169 and 115), diquat (183; 157 and 78), glufosinate (182; 136 and 119) and glyphosate (170; 88 and 60), respectively. Analyte-free blood and urine samples, fortified with the analytes of interest, were used for method development/validation and yielded acceptable recoveries of the analytes; interday and intraday precision and accuracy data; calibration linearity and limits of detection and quantitation. This method was successfully incorporated into an overall analytical scheme, designed for the analysis of a broad range of compounds present in postmortem samples, helpful to medical examiners' efforts to determine victims' causes of death.

Biological monitoring of pesticide exposures in residents living near agricultural land.

BACKGROUND: There is currently a lack of reliable information on the exposures of residents and bystanders to pesticides in the UK. Previous research has shown that the methods currently used for assessing pesticide exposure for regulatory purposes are appropriate for farm workers 1. However, there were indications that the exposures of bystanders may sometimes be underestimated. The previous study did not collect data for residents. Therefore, this study aims to collect measurements to determine if the current methods and tools are appropriate for assessing pesticide exposure for residents living near agricultural fields. METHODS/DESIGN: The study will recruit owners of farms and orchards (hereafter both will be referred to as farms) that spray their agricultural crops with certain specified pesticides, and which have residential areas in close proximity to these fields. Recruited farms will be asked to provide details of their pesticide usage throughout the spray season. Informed consenting residents (adults (18 years and over) and children (aged 4-12 years)) will be asked to provide urine samples and accompanying activity diaries during the spraying season and in addition for a limited number of weeks before/after the spray season to allow background pesticide metabolite levels to be determined. Selected urine samples will be analysed for the pesticide metabolites of interest. Statistical analysis and mathematical modelling will use the laboratory results, along with the additional data collected from the farmers and residents, to determine systemic exposure levels amongst residents. Surveys will be carried out in selected areas of the United Kingdom over two years (2011 and 2012), covering two spraying seasons and the time between the spraying seasons. DISCUSSION: The described study protocol was implemented for the sample and data collection procedures carried out in 2011. Based on experience to date, no major changes to the protocol are anticipated for the 2012 spray season although the pesticides and regional areas for inclusion in 2012 are still to be confirmed.

Monolithic spin column extraction and GC-MS for the simultaneous assay of diquat, paraquat, and fenitrothion in human serum and urine.

We present a method based on monolitic spin column extraction and gas chromatography-mass spectrometry as an analytical method for screening diquat (DQ), paraquat (PQ), and fenitrothion in serum and urine. This method is useful for clinical and forensic toxicological analyses. Recovery of DQ, PQ, and fenitrothion from serum and urine, spiked at concentrations between 0.1, 2.5, 20, and 45 µg/ml, ranged from 51.3% to 106.1%. Relative standard deviation percentages were between 3.3% and 14.8%. Detection and quantitation limits for serum and urine were 0.025 and 0.05 µg/ml, respectively, for DQ, 0.1 and 0.1 µg/ml, respectively, for PQ, and 0.025 and 0.05 µg/ml, respectively, for fenitrothion. Therefore, these compounds can be detected and quantified in the case of acute poisoning.

The poison pen: bedside diagnosis of urinary diquat.

Diquat is a bipyridyl herbicide with nephrotoxic effects. This in vitro study demonstrates a colorimetric test for detection of diquat in human urine. Urine specimens using ten concentrations of diquat herbicide solution and controls for urine and glyphosate were prepared. A two-step assay (addition of bicarbonate followed by sodium dithionite) was performed, with a resulting color change of the original solution for each specimen. Color change intensity was noted immediately and after 30 min, by gross visual inspection. A green color with concentration-dependent intensity was detected in all specimens, in which concentrations of diquat solution ranged from 0.73 to 730 mg/L. This colorimetric effect disappeared after 30 min. The sodium bicarbonate/dithionite test may be useful as a qualitative bedside technique for the detection of urinary diquat in the appropriate clinical setting.

Method for measurement of the quaternary amine compounds paraquat and diquat in human urine using high-performance liquid chromatography-tandem mass spectrometry.

We have developed a highly selective and sensitive analytical method to quantify paraquat and diquat by use of high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS). The sample preparation includes solid phase extraction that uses weak cation exchange cartridges. These highly charged dual quaternary amines were not retained by standard reversed phase columns, but they could be adequately separated through HPLC with a HILIC column. The detection was carried out with a triple quadrupole mass spectrometer with an electrospray ionization probe in positive ion mode in multiple reaction monitoring. Repeated analysis in human urine samples spiked with low (5 ng/ml), medium (15 ng/ml), and high (30 ng/ml) concentrations of the analytes yielded relative standard deviations of less than 9%. The extraction efficiencies ranged from 77.7% to 94.2%. The limits of detection were in the range of 1 ng/ml.

Gas chromatographic-mass spectrometric method for the determination of the herbicides paraquat and diquat in plasma and urine samples.

In the present work, a method was developed and optimized aiming to determinate the herbicides paraquat (PQ) and diquat (DQ) in human plasma and urine samples. An initial procedure of chemical reduction of the analytes by adding NaBH4 directly in the buffered samples (pH 8.0) was performed. This procedure was necessary to convert the quaternary ammonium substances into more volatile compounds for gas chromatographic analysis. The reduction compounds were extracted with C18 cartridges (solid-phase extraction). Ethyl paraquat (EPQ) was used as internal standard (IS). Gas chromatography-mass spectrometry (GC-MS) was used to identify and quantify the analytes in selected ion monitoring (SIM) mode. The limits of detection were 0.05 mg/l for both PQ and DQ. By using the weighted least squares linear regression (1/x1/2 for plasma and 1/y for urine), the accuracy of the analytical method was improved at the lower end of the calibration curve (from 0.1 to 50 mg/l; r>0.98). This method can be readily utilized as an important tool to confirm the suspicion of PQ and/or DQ poisoning and evaluate the extent of the intoxication.

Determination of paraquat and diquat in human body fluids by high-performance liquid chromatography/tandem mass spectrometry.

Paraquat (PQ) and diquat (DQ) in human whole blood and urine were analyzed by high-performance liquid chromatography/tandem mass spectrometry (HPLC/MS/MS) with positive ion electrospray ionization (ESI). The compounds were extracted with Sep-Pak C18 cartridges from whole blood and urine samples containing ethyl paraquat as an internal standard. The separation of PQ and DQ was carried out using ion-pair chromatography with heptafluorobutyric acid in 20 mM ammonium acetate and acetonitrile gradient elution for successful coupling with MS. Both compounds formed base peaks due to [M-H]+ ions by HPLC/ESI-MS and the product ions produced from each [M-H]+ ion by HPLC/MS/MS. Selective reaction monitoring (SRM) showed much higher sensitivity for both body fluids. Therefore, a detailed procedure for the detection of compounds by SRM with HPLC/MS/MS was established and carefully validated. The recoveries of PQ and DQ were 80.8-95.4% for whole blood and 84.2-96.7% for urine. The calibration curves for PQ and DQ showed excellent linearity in the range of 25-400 ng ml(-1) of whole blood and urine. The detection limits were 10 ng ml(-1) for PQ and 5 ng ml(-1) for DQ in both body fluids. The intra- and inter-day precision for both compounds in whole blood and urine samples were not greater than 13.0%. The data obtained from the determination of PQ and DQ in rat blood after oral administration of the compounds are also presented.

Separation and quantification of paraquat and diquat in serum and urine by capillary electrophoresis.

The use of capillary electrophoresis (CE) for simultaneous qualitative and quantitative detection of paraquat (PQ) and diquat (DQ) in both serum and urine was investigated. The two herbicides were extracted from biological fluids with liquefied phenol. Serum required a deproteinization with chloroform and ammonium sulfate as pretreatment. The extracts were hydrodynamically injected and the complete separation was carried out in 10 min, using a capillary tube (75 microm i.d., 500 mm) of fused silica containing 50 mM phosphate buffer (pH 2.50) as the carrier. UV absorbance detection at 200 nm was performed by an on-column detector. The analytes were characterized by their respective migration times. Analytical recoveries were 52.6% for PQ and 62.6% for DQ in serum, and 71.4% and 59.3%, respectively, in urine. The linearity was studied up to 4 mg/L and the limits of detection (LODs) were better than 5 pg/mL in serum or urine. The CE method described was applied to the characterization of two lethal poisonings and results were related.

Spectra interference between diquat and paraquat by second derivative spectrophotometry.

A rapid and accurate method, combining solid-phase extraction and second-order derivative spectrophotomety approaches, is developed for the simultaneous determination of diquat (DQ) and paraquat (PQ) in blood, tissue and urine samples. Supernatant resulting from the precipitation of protein (with trichloroacetic acid) in plasma and tissue or Amberlite IRA-401 resin treated urine are passed through a mini-column packed with Wakogel gel (Silica gel). Analytes are then eluted with a non-organic solvent, 0.2mol/l HCl solution containing 2mol/l NH(4)Cl. UV spectrum of the eluent in 220-350nm range provides effective screen to detect the presence of DQ and/or PQ. In the presence of DQ or PQ alone, the analyte present is quantitated by conventional zero- or second-order derivative spectrophotometry. The calibration curve in the 0.1-5.0mg/l range for either analyte obeys Beer's law. When both DQ and PQ are present, their concentrations are determined by the peak amplitudes of their respective second-derivative spectra after the addition of alkaline dithionite reagent. Interference is negligible when the DQ/PQ concentration ratio is within the 5.0-0.2 range. Using a 2-ml of sample size, the detection limits for DQ and PQ in plasma are 0.02 and 0.005mg/l. The corresponding detection limits for urine samples (10ml sample size) are 0.004 and 0.001mg/l. Recoveries of DQ and PQ in triplicate plasma and urine samples spiked with 0.5mg/l of analytes are 93 and 85%. The precision of the proposed method resulting from triplicate study of spiked urine samples varies from 3.2 to 4.6% at 0.5mg/l of DQ and PQ, respectively.

Simultaneous determination of paraquat and diquat in urine by capillary electrophoresis.

Qualitative and quantitative detection of paraquat and diquat in urine was performed by capillary zone electrophoresis (CZE). In non-extracted urine, these two closely related herbicides were hydrodynamically or electrokinetically injected into the capillary and well separated in a acidic (pH 3.0) buffer (10 mM glycin, 50 mM NaCl and 20% methanol) within 8 min. The analytes can be identified by their respective migration time with no interfering endogeous compounds around. The peaks were further confirmed by their respective multi-wavelength scanning spectra. Limits of detection (LOD) were 0.2 and 0.1 mg/ml for PQ and DQ, respectively, in nonextracted urine using hydrodynamic injection. Detection sensitivity was greatly improved by solid phase extraction of the compounds followed by CZE using electro-injection under which LODs were 15 and 8 ng/ml for paraquat and diquat respectively. We conclude CZE is a useful method for laboratory diagnosis of herbicide intoxication.

Simple method for analysis of diquat in biological fluids and tissues by high-performance liquid chromatography.

A simple HPLC method has been described to quantify diquat in biological fluids and tissues. This method permits separation and quantification of diquat from blood, bile, urine, liver and kidney. It does not require special pretreatment of the samples prior to analysis, nor a specially prepared analytical column. Various concentrations of diquat were added (10-300 nmol/ml or g) to fluids or tissues. Analysis of blank samples revealed no substances that interfere with diquat elution. Excellent recovery (95-105%) was obtained. Diquat (120 mumol/kg, i.v.) was injected to rats and quantified in bile, blood and liver. Concentration of diquat was higher in blood and bile than liver. Therefore, this method is applicable for quantification of diquat in toxicological samples, and may be used to determine structurally similar compounds such as paraquat.

A rapid, simultaneous determination of paraquat and diquat in serum and urine using second-derivative spectroscopy.

A rapid, simple method based on second-derivative spectroscopy of the simultaneous analysis of paraquat and diquat in serum and urine is described. Paraquat and diquat in serum were deproteinized with sulfosalicylic acid, and those in urine were reduced with NaOH-dithionite solution. A qualitative and quantitative analysis of reduced paraquat and diquat was made at the amplitude peaks of 396-403 nm and 454-464 nm in the second-derivative spectra, respectively. The entire procedure was completed within about 10 minutes for a serum sample and within about 5 minutes for a urine sample. Application of the proposed method on a poisoned patient is also reported.

Extraction of diquat with 1-butanol from biological materials.

Diquat can be extracted with 1-butanol from high pH solution in the presence of several moderate reductants. The red colored reduced compound of diquat in water turns to a purple compound in 1-butanol. The absorption of the purple compound is 0.105 at 383 nm and 0.119 at 520 nm in 1 microgram diquat/ml 1-butanol. The latter value is a little higher than that of the red compound at 495 nm in water. The purple compound is much more stable than the red compound in water. More than 80% of 10 ppm diquat added can be extracted from serum, blood, tissues, urine and some drinks. The extraction with 1-butanol is useful for concentration of diquat contained in large volume. The lower limit of detection is 0.1 microgram/ml 1-butanol. Paraquat is insoluble in 1-butanol under the same condition. Therefore, this method is applicable for the determination of diquat when paraquat is also contained in the solution.