3D-printed tablets using a single-step hot-melt pneumatic process for poorly soluble drugs.

Main purpose was to evaluate the applicability of a 3D-printer equipped with a hot-melt pneumatic dispenser as a single-step process to prepare tablet dosage forms. Dutasteride, a poorly water-soluble drug, was selected as a model drug. Soluplus®, Kollidon® VA 64, Eudragit® E PO, and hydroxypropyl cellulose (HPC) were premixed as bulking agents prior to printing. Differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), and thermogravimetric analysis (TGA) were utilized to evaluate the physicochemical properties of the 3D-printed tablets. Moreover, different geometries were designed to correlate the surface area/volume (SA/V) of the tablets with respect to their release profiles. As a result, printed dutasteride was confirmed to be in an amorphous state and not recrystallized even after the accelerated storage stability. Out of the four bulking agents, Kollidon® VA 64, enhanced the dissolution of the printed dutasteride, reaching above 80% within 15 min. These results suggest that the hot-melt pneumatic dispenser was efficient in converting the solid state into an amorphous state, which significantly enhanced the dissolution. On the other hand, the tube-shaped 3D-printed tablet exhibited the fastest drug dissolution profile, which had the highest SA/V ratio in comparison to the cube, hemisphere, and pyramid shapes. These results confirm the dependency of the drug dissolution rate not only on its crystallinity but also on the surface area of the 3D-printed tablet. Therefore, a 3D-printer equipped with a hot-melt pneumatic dispenser possesses useful applicability in enhancing drug dissolution, especially for poorly water-soluble drugs, in a single-step process.

Structure of human steroid 5α-reductase 2 with the anti-androgen drug finasteride.

Human steroid 5α-reductase 2 (SRD5A2) is an integral membrane enzyme in steroid metabolism and catalyzes the reduction of testosterone to dihydrotestosterone. Mutations in the SRD5A2 gene have been linked to 5α-reductase deficiency and prostate cancer. Finasteride and dutasteride, as SRD5A2 inhibitors, are widely used antiandrogen drugs for benign prostate hyperplasia. The molecular mechanisms underlying enzyme catalysis and inhibition for SRD5A2 and other eukaryotic integral membrane steroid reductases remain elusive due to a lack of structural information. Here, we report a crystal structure of human SRD5A2 at 2.8 Å, revealing a unique 7-TM structural topology and an intermediate adduct of finasteride and NADPH as NADP-dihydrofinasteride in a largely enclosed binding cavity inside the transmembrane domain. Structural analysis together with computational and mutagenesis studies reveal the molecular mechanisms of the catalyzed reaction and of finasteride inhibition involving residues E57 and Y91. Molecular dynamics simulation results indicate high conformational dynamics of the cytosolic region that regulate NADPH/NADP+ exchange. Mapping disease-causing mutations of SRD5A2 to our structure suggests molecular mechanisms for their pathological effects. Our results offer critical structural insights into the function of integral membrane steroid reductases and may facilitate drug development.

Dutasteride nanocapsules for hair follicle targeting: Effect of chitosan-coating and physical stimulus.

In general, nanometer-sized drug delivery systems have a natural tendency for accommodation in the follicular cavities, which makes them advantageous in the treatment of conditions affecting these structures. Still, follicular targeting enhancement can improve therapy outcomes. Here, we compare two strategies to further promote dutasteride follicular-targeted delivery: the chemical modulation of nanosystem surface properties by coating with the natural polymer chitosan, and the application of a massage. For this, poly-(ɛ-caprolactone)-lipid-core nanocapsules (NC) containing dutasteride were developed and had their permeation profile compared to chitosan-coated nanocapsules (NC-CS). Nanocapsules showed high drug encapsulation efficiency (>94%), and stability for up to 90 days of storage. As expected, chitosan coating increased the size and zeta potential, from 199.0 ± 0.5 nm (PdI of 0.12) and - 13.6 ± 0.6 mV to 224.9 ± 3.4 nm (PdI 0.23) and + 40.2 ± 0.8 mV, respectively. Both coated and non-coated nanoparticles targeted the hair follicles compared to a drug solution. Enhanced hair follicles targeting was observed after the massage procedure, with 5 and 2-fold increases relative to NC and NC-CS, respectively. In conclusion, this work demonstrates dutasteride nanocapsules can target the follicular casts, and a simple physical stimulation can enhance 5-times the drug amount accumulated.

In-Vitro and In-Vivo Evaluation of Supersaturable Self-Nanoemulsifying Drug Delivery System (SNEDDS) of Dutasteride.

OBJECTIVE: A novel, Supersaturable Self-Nanoemulsifying Drug Delivery System (S-SNEDDS) has been prepared to improve the Dutasteride's poor aqueous solubility. METHODS: By adding Hydroxy Propyl Methyl Cellulose (HPMC) as a precipitation inhibitor to conventional SNEDDS, a supersaturable system was prepared. Firstly, the prepared SNEDDS played an important role in increasing the aqueous solubility and hence oral absorption due to nano-range size. Secondly, the S-SNEDDS found to be advantageous over SNEDDS for having a higher drug load and inhibition of dilution precipitation of Dutasteride. Formulated S-SNEDDS (F1-F9) ranged from 37.42 ± 1.02 to 68.92 ± 0.09 nm with PDI 0.219-0.34 and drug loading of over 95 percent. RESULTS: The study of in-vitro dissolution revealed higher dissolution for S-SNEDDS compared to SNEDDS and Avodart soft gelatin capsule as a commercial product. In addition, higher absorption was observed for S-SNEDDS showing approximately 1.28 and 1.27 fold AUC (0-24h) and Cmax compared to commercial products. Therefore, S-SNEDDS has proven as a novel drug delivery system with a higher drug load, higher self-emulsification efficiency, higher stability, higher dissolution and pronounced absorption. CONCLUSION: In conclusion, S-SNEDDS could be a newly emerging approach to enhance aqueous solubility in many folds for drugs belonging to BCS Class II and IV and thus absorption and oral bioavailability.

Solid dispersion of dutasteride using the solvent evaporation method: Approaches to improve dissolution rate and oral bioavailability in rats.

The aim of this study was to develop a dutasteride (DUT) solid dispersion (SD) using hydrophilic substances to enhance its dissolution (%) and oral bioavailability in rats. DUT-SD formulations were prepared with various co-polymers using a solvent evaporation method. The physical properties of DUT-SD formulations were confirmed using field emission scanning electron microscopy (FE-SEM), differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), and attenuated total reflectance Fourier transform infrared (ATR-FT-IR) spectroscopy. The toxicity and oral bioavailability of DUT-SD formulations were evaluated. Tocopheryl polyethylene glycol-1000-succinate (TPGS) was chosen as the solubilizer; and methylene chloride, and Aerosil® 200 or microcrystalline cellulose (MCC) were chosen as the solvent and carrier, respectively, based on a solubility test and pre-dissolution study. The dissolution levels of DUT-SD formulations were 86.3 ±â€¯2.3% (F15) and 95.1 ±â€¯1.9% (F16) after 1 h, which were higher than those of the commercial product, i.e., Avodart® (75.8 ±â€¯1.5%) in 0.1 N HCl containing 1% (w/v) sodium lauryl sulfate (SLS). The F16 formulation was found to be stable, after assessing its dissolution (%) and drug content (%) for 6 months. The DUT-SD formulations resulted in relative bioavailability (BA) values of 126.4% (F15) and 132.1% (F16), which were enhanced compared to that of Avodart®. Dissolution (%) and relative BA values were both increased by hydrogen interaction between TPGS and DUT. This study might contribute to a new formulation (powder) whose oral bioavailability is greater than that of Avodart® (soft capsule), which could facilitate to the use of the SD system during the production process.

Synthesis and comprehensive structural and physicochemical characterization of dutasteride hydrochloride hydrate solvates.

Four crystalline dutasteride hydrochloride hydrate solvates containing respectively methanol, ethanol, acetone and acetonitrile molecules were obtained. All samples were characterized by extensive spectroscopic analysis with infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC) and 1H as well as 13C NMR techniques. For three solvates, i.e. methanol, ethanol and acetone solvates, the single crystal X-ray diffraction (SCXRD) experiments were possible, and their respective crystal and molecular structures were determined. The present study allowed to unambiguously establish the molecular composition of solvates as consisting of a dutasteride : hydrogen chloride : water : solvent in a molar ratio of 1:1:1:1 and confirm that they are isostructural. Beyond providing the full spectroscopic characteristic of the compounds, the results obtained have also allowed clarifying of some appearing inconsistencies in published literature regarding the appropriate attribution of IR absorption bands to the relevant molecular vibrations.

Preparation and characterization of dutasteride-loaded nanostructured lipid carriers coated with stearic acid-chitosan oligomer for topical delivery.

Dutasteride, used for treating benign prostate hyperplasia (BPH), promotes hair growth. To enhance delivery to the hair follicles and reduce systemic effects, in this study dutasteride has been formulated for topical application, in a nanostructured lipid carrier (NLC) coated with chitosan oligomer-stearic acid (CSO-SA). CSO-SA has been successfully synthesized, as confirmed using 1H NMR and FTIR. Formulation of dutasteride-loaded nanostructured lipid carriers (DST-NLCs) was optimized using a 23 full factorial design. This formulation was coated with different concentrations of stearic acid-chitosan solution. Coating DST-NLCs with 5% SA-CSO increased mean size from 187.6±7.0nm to 220.1±11.9nm, and modified surface charge, with zeta potentials being -18.3±0.9mV and +25.8±1.1mV for uncoated and coated DST-NLCs respectively. Transmission electron microscopy showed all formulations comprised approximately spherical particles. DST-NLCs, coated and uncoated with CSO-SA, exhibited particle size stability over 60days, when stored at 4-8°C. However, NLCs coated with CSO (without conjugation) showed aggregation when stored at 4-8°C after 30days. The measured particle size for all formulations stored at 25°C suggested aggregation, which was greatest for DST-NLCs coated with 10% CSO-SA and 5% CSO. All nanoparticle formulations exhibited rapid release in an in vitro release study, with uncoated NLCs exhibiting the fastest release rate. Using a Franz diffusion cell, no dutasteride permeated through pig ear skin after 48h, such that it was not detected in the receptor chamber for all samples. The amount of dutasteride in the skin was significantly different (p<0.05) for DST-NLCs (6.09±1.09µg/cm2) without coating and those coated with 5% CSO-SA (2.82±0.40µg/cm2), 10% CSO-SA (2.70±0.35µg/cm2) and CSO (2.11±0.64µg/cm2). There was a significant difference (p<0.05) in the cytotoxicity (IC50) between dutasteride alone and in the nanoparticles. DST-NLCs coated and uncoated with CSO-SA increased the maximum non-toxic concentration by 20-fold compared to dutasteride alone. These studies indicate that a stearic acid-chitosan conjugate was successfully prepared, and modified the surface charge of DST-NLCs from negative to positive. These stable, less cytotoxic, positively-charged dutasteride-loaded nanostructured lipid carriers, with stearic acid-chitosan oligomer conjugate, are appropriate for topical delivery and have potential for promotion of hair growth.

Dutasteride in Androgenetic Alopecia: An Update.

BACKGROUND: Androgenetic alopecia is a common condition characterized by thinning of scalp hair. Conversion of testosterone to dihydrotestosterone, a more potent androgen, by the enzyme 5-α-reductase is responsible for underlying pathogenesis. Dutasteride, a synthetic 4-azasteroid, is a selective and competitive inhibitor of both type-1 and type-2 isoenzymes of 5-α-reductase. Finasteride and minoxidil are the only approved drugs for androgenetic alopecia. Dutasteride has been demonstrated to be effective in several randomized, double-blind, placebo controlled trials in androgenetic alopecia. In this review, after the pharmacology of dutasteride, the authors have discussed the status of dutasteride in androgenetic alopecia and have compared its efficacy with that of finasteride. OBJECTIVE: This article aims to review the current status of dutasteride in androgenetic alopecia. The structure, mechanism of action, pharmacokinetics and side effects are discussed along with its comparison with finasteride in androgenetic alopecia. METHOD: The main sources of our information were Medline Pubmed, Google scholar and Scopus including original articles and review articles. The keywords 'dutasteride', 'dutasteride in androgenetic alopecia' were used for search. CONCLUSION: Like finasteride, dutasteride is now becoming popular treatment option in AGA, due to its good response shown by various randomized control studies and meta-analysis. Also, in most of these studies, dutasteride was found to be better than finasteride with comparable adverse effects. Therefore, dutasteride could become a treatment of choice for AGA in near future.

In-silico screening for DNA-dependent protein kinase (DNA-PK) inhibitors: Combined homology modeling, docking, molecular dynamic study followed by biological investigation.

DNA-dependent protein kinase (DNA-PK) is a key enzyme in non-homologous DNA end joining (NHEJ) repair pathway. The targeted inhibition of such enzyme would furnish a valuable option for cancer treatment. In this study we report the development of validation of enzyme homology model, and the subsequent use of this model to perform docking-based virtual screening against a database of FDA-approved drugs. The nominated highest ranking hits (Praziquantel and Dutasteride) were subjected to biological investigation. Additionally, molecular dynamic study was carried-out for binding mode exploration. Results of the biological evaluation revealed that both compounds inhibit the DNA-PK enzymatic activity at relatively high concentration levels with an IC50 of 17.3µM for praziquantel and >20µM for dutasteride. Furthermore, both agents enhanced the anti-proliferative effects of doxorubicin and cisplatin on breast cancer (MCF7) and lung cancer (A549) cell lines. This result indicates that these two hits are good candidate as DNA-PK inhibitors and worth further structural modifications to enhance their enzyme inhibitory effects.

Design of a gelatin microparticle-containing self-microemulsifying formulation for enhanced oral bioavailability of dutasteride.

In this study, a gelatin microparticle-containing self-microemulsifying formulation (SMF) was developed using a spray-drying method to enhance the oral delivery of the poorly water-soluble therapeutic dutasteride. The effect of the amount of gelatin and the type and amount of hydrophilic additives, namely, Gelucire(®) 44/14, poloxamer 407, sodium lauryl sulfate, Soluplus(®), Solutol™ HS15, and D-α-tocopheryl polyethylene glycol 1000 succinate, on the droplet size, dissolution, and oral absorption of dutasteride from the SMF was investigated. Upon dispersion of the gelatin microparticle-containing SMF in water after spray-drying, the mean droplet size of the aqueous dispersion was in the range of 110-137 nm. The in vitro dissolution and recrystallization results showed that gelatin could be used as a solid carrier and recrystallization inhibitor for the SMF of dutasteride. Furthermore, combination of the gelatin microparticle-containing SMF and Soluplus enhanced the dissolution properties and oral absorption of dutasteride. The results of our study suggest that the gelatin microparticle-containing SMF in combination with Soluplus could be useful to enhance the oral absorption of dutasteride.

Preparation and in vivo evaluation of a dutasteride-loaded solid-supersaturatable self-microemulsifying drug delivery system.

The purpose of this study was to prepare a dutasteride-loaded solid-supersaturatable self-microemulsifying drug delivery system (SMEDDS) using hydrophilic additives with high oral bioavailability, and to determine if there was a correlation between the in vitro dissolution data and the in vivo pharmacokinetic parameters of this delivery system in rats. A dutasteride-loaded solid-supersaturatable SMEDDS was generated by adsorption of liquid SMEDDS onto Aerosil 200 colloidal silica using a spray drying process. The dissolution and oral absorption of dutasteride from solid SMEDDS significantly increased after the addition of hydroxypropylmethyl cellulose (HPMC) or Soluplus. Solid SMEDDS/Aerosil 200/Soluplus microparticles had higher oral bioavailability with 6.8- and 5.0-fold higher peak plasma concentration (Cmax) and area under the concentration-time curve (AUC) values, respectively, than that of the equivalent physical mixture. A linear correlation between in vitro dissolution efficiency and in vivo pharmacokinetic parameters was demonstrated for both AUC and Cmax values. Therefore, the preparation of a solid-supersaturatable SMEDDS with HPMC or Soluplus could be a promising formulation strategy to develop novel solid dosage forms of dutasteride.

Improved oral absorption of dutasteride via Soluplus®-based supersaturable self-emulsifying drug delivery system (S-SEDDS).

A novel supersaturable self-emulsifying drug delivery system (S-SEDDS) was formulated to improve the oral absorption of dutasteride (DTS), a 5α-reductase inhibitor that is poorly water-soluble. A supersaturable system was prepared by employing Soluplus(®) (polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer) as a precipitation inhibitor with a conventional SEDDS vehicle consisted of Capryol™ 90, Cremophor(®) EL and Transcutol(®) HP (DTS:SEDDS vehicle:Soluplus(®)=1.0:67.6:10.0 w/v/w). In an in vitro dissolution test in a non-sink condition, the drug dissolution rate from SEDDS was rapidly increased to 72% for an initial period of 5min, but underwent rapid drug precipitation within 2h, decreasing the amount of drug dissolved to one-seventh of its original amount. On the other hand, S-SEDDS resulted in a slower crystallization of DTS by virtue of a precipitation inhibitor, maintaining a 3 times greater dissolution rate after 2h compared to SEDDS. In an in vivo pharmacokinetic study in rats, the S-SEDDS formulation exhibited 3.9-fold greater area-under-curve value than that of the drug suspension and 1.3-fold greater than that of SEDDS. The maximum plasma concentration of S-SEDDS was 5.6- and 2.0-fold higher compared to drug suspension and SEDDS, respectively. The results of this study suggest that the novel supersaturable system may be a promising tool for improving the physicochemical property and oral absorption of the 5α-reductase inhibitor.