Chitosan-coated paper packaging for specialty coffee beans: Coating characterization, bean and beverage analysis.

Cellulose-based packaging has received great attention due to its characteristics of biodegradability, sustainability, and recyclability. Natural polymer coatings are usually applied to the paper surface to enhance the barriers to water vapour and improve the mechanical properties. A chitosan-based coating for paper packaging was developed in this work to store specialty roasted coffee beans, evaluating two samples of chitosan (Sigma® and molasses chitosan), and following the physico-chemical and microbiological characteristics of coffee beans along a period of 60 days. Sensory tests (Ranking Descriptive Analysis and Preference Test) were applied to the beverage prepared with the roasted and ground coffee beans stored in each packaging. Thin chitosan films provided good coverage and adhesion on the paper. Improved mechanical properties and lower water permeability were observed in the chitosan-coated papers. The physicochemical and microbiological characteristics of the coffee beans were not influenced by the packaging along 60 days of storage. The molasses chitosan coating resulted in slightly darker roasted beans. In sensory evaluation, there is a clear difference between the chitosan samples, so that molasses chitosan-coated packaging had higher scores compared to Sigma® chitosan treatment for flavor and global impression in the preference analysis of the beverage. The molasses chitosan-coated packaging had three to four more consumers attributing the highest scores for the beverage prepared with the roasted beans stored in this type of packaging.

Preparation of films based on reticulated fish gelatin containing garlic essential oil.

Agro-industrial co-products, such as fish gelatin, stand out for their capacity in forming biopolymeric films, being biocompatible and non-toxic; however, its hydrophilicity poses a challenge. Essential oils, rich in bioactives, attract research interest aiming to enhance the protective barrier of films and enable their application in packaging. This study produced films based on cross-linked Nile tilapia skin gelatin, incorporating garlic essential oil. Gelatin obtained through partial collagen hydrolysis from the fish skin and cross-linked with gallic acid had hydroxyproline content of 10.02 g 100 g-1 and gel strength of 287 g, which were consistent with other studies. Oil extraction used supercritical CO2 as a solvent and ethanol as a cosolvent, following a factorial experimental design, evaluating the extraction temperature (40 °C and 70 °C) and cosolvent ratio (1:1 and 1:3), with three central points. Extraction was successful, with higher yields on a dry basis at 70 °C (88.35 %), using a 1:1 cosolvent ratio. Films incorporated with oil exhibited lower water vapor permeability (WVP) than those with only cross-linked gelatin (1.59 (g m-1 s-1 Pa-1) 1011). The film with the most suitable tensile strength (19.07 MPa), elongation (120.91 %), and WVP (1.09 (g m-1 s-1 Pa-1) 1011) properties contained garlic oil extracted at the central point (55 °C and 1:2). Thermal analysis indicated increased melting temperatures in films with added oil, suggesting low thermal degradation. These results suggest that garlic oil addition can improve the properties of fish gelatin-based films, making them promising for biodegradable packaging.

Chitosan-based nanocomposite films with carnauba wax, rosin resin, and zinc oxide nanoparticles.

This work aimed to develop edible emulsion-based barriers in the form of chitosan composite films, with a focus on assessing the impacts of carnauba wax, rosin resin, and zinc oxide nanoparticles on their properties. Six films were produced by casting using chitosan as polymer base and glycerol as plasticizer. Acetic acid and polysorbate 80 were also used to facilitate the dissolution and mixing of the components. The six filmogenic solutions contained chitosan at 1.2% w/v, wax or resin content with 0 or 0.6% m/v and ZnO with 0 or 0.05% m/v. The dried films were characterized according to their chemical, barrier, mechanical, thermal and optical properties. All treatments resulted in flexible films. Chitosan films appeared smoother and more uniform under SEM imaging, while carnauba wax films displayed roughness due to their hydrophobic nature. Wax and resin films were less transparent and water soluble than the chitosan-only films. On the other hand, the addition of ZnO in the formulations increased the solubility of the films. The sorption degree was in line with the solubility results, i.e., films with ZnO presented higher sorption degree and solubility values. All treatments showed low or non-light UV transmission, indicating that the films provide good barrier to UV light. In the visible light region, films of resin with ZnO showed the lowest transmittance values, hence offering a good barrier to visible light. Among the evaluated films, chitosan, and resin films with ZnO nanoparticles were more rigid and resistant to deformation. Overall, films produced with rosin resin and ZnO nanoparticles showed potential improvements in barrier, mechanical, thermal, and optical properties, mainly due to their low water solubility, good UV protection and low permeability to water vapor and oxygen, which are suitable for using in formulations, intended to produce edible films and coatings.

A transparent p-coumaric acid-grafted-chitosan coating with antimicrobial, antioxidant and antifogging properties for fruit packaging applications.

The study aimed to develop a novel, transparent and non-toxic coating with antimicrobial, antioxidant, and antifogging properties. The p-coumaric acid-grafted chitosan (CS-PCA) was synthesized via a carbodiimide coupling reaction and then characterized. The CS-PCA coatings were further prepared using the casting method. The CS-PCA coatings obtained exhibited excellent transparency, UV-light barrier ability, and antifogging properties, as confirmed by spectroscopy and antifogging tests. The CS-PCA coatings showed stronger antioxidant capacity and antimicrobial properties against Escherichia coli, Staphylococcus aureus and Botrytis cinerea compared to CS. The multifunctional coatings were further coated on the polyethylene cling film and their effectiveness was confirmed through a strawberry preservation test. The decay of the strawberries was reduced by CS-PCA coated film at room temperature.

Microbiome mapping in beef processing reveals safety-relevant variations in microbial diversity and genomic features.

The microbiome of surfaces along the beef processing chain represents a critical nexus where microbial ecosystems play a pivotal role in meat quality and safety of end products. This study offers a comprehensive analysis of the microbiome along beef processing using whole metagenomics with a particular focus on antimicrobial resistance and virulence-associated genes distribution. Our findings highlighted that microbial communities change dynamically in the different steps along beef processing chain, influenced by the specific conditions of each micro-environment. Brochothrix thermosphacta, Carnobacterium maltaromaticum, Pseudomonas fragi, Psychrobacter cryohalolentis and Psychrobacter immobilis were identified as the key species that characterize beef processing environments. Carcass samples and slaughterhouse surfaces exhibited a high abundance of antibiotic resistance genes (ARGs), mainly belonging to aminoglycosides, ß-lactams, amphenicols, sulfonamides and tetracyclines antibiotic classes, also localized on mobile elements, suggesting the possibility to be transmitted to human pathogens. We also evaluated how the initial microbial contamination of raw beef changes in response to storage conditions, showing different species prevailing according to the type of packaging employed. We identified several genes leading to the production of spoilage-associated compounds, and highlighted the different genomic potential selected by the storage conditions. Our results suggested that surfaces in beef processing environments represent a hotspot for beef contamination and evidenced that mapping the resident microbiome in these environments may help in reducing meat microbial contamination, increasing shelf-life, and finally contributing to food waste restraint.

Alginate Films Enriched in Raspberry and/or Black Currant Seed Oils as Active Food Packaging.

Alginate films plasticized with glycerol and enriched in raspberry and/or black currant seed oils were prepared via casting solution techniques. The intention was to create active films for food packaging where antioxidants in a film would deactivate oxidants in a packed product or its surroundings, improving conditions inside packaging and extending the shelf life of such a product. The prepared materials were characterized by physicochemical, spectroscopic, mechanical, water vapor transmission (WVTR), and antioxidant activity analysis. Infrared spectra of the alginate films with oils were similar to those without the additive; the band with a maximum at about 1740 cm-1 stood out. The prepared materials with oils were thicker, contained less water, were more yellow, and were less permeable to water vapor. Moreover, the presence of the oil in the films resulted in a slightly lower Young's modulus and lower stress at break values but higher strain at break. The antioxidant capacity of raspberry seed oil itself was about five times higher than that of black currant seed oil, and a similar trend was noticed for films modified with these oils. The results indicated that both oils could be used as active substances with antioxidant properties in food packaging.

PEG-crosslinked O-carboxymethyl chitosan films with degradability and antibacterial activity for food packaging.

This study developed a kind of PEG-crosslinked O-carboxymethyl chitosan (O-CMC-PEG) with various PEG content for food packaging. The crosslinking agent of isocyanate-terminated PEG was firstly synthesized by a simple condensation reaction between PEG and excess diisocyanate, then the crosslink between O-carboxymethyl chitosan (O-CMC) and crosslinking agent occurred under mild conditions to produce O-CMC-PEG with a crosslinked structure linked by urea bonds. FT-IR and 1H NMR techniques were utilized to confirm the chemical structures of the crosslinking agent and O-CMC-PEGs. Extensive research was conducted to investigate the impact of the PEG content (or crosslinking degree) on the physicochemical characteristics of the casted O-CMC-PEG films. The results illuminated that crosslinking and components compatibility could improve their tensile features and water vapor barrier performance, while high PEG content played the inverse effects due to the microphase separation between PEG and O-CMC segments. The in vitro degradation rate and water sensitivity primarily depended on the crosslinking degree in comparison with the PEG content. Furthermore, caused by the remaining -NH2 groups of O-CMC, the films demonstrated antibacterial activity against Escherichia coli and Staphylococcus aureus. When the PEG content was 6% (medium crosslinking degree), the prepared O-CMC-PEG-6% film possessed optimal tensile features, high water resistance, appropriate degradation rate, low water vapor transmission rate and fine broad-spectrum antibacterial capacity, manifesting a great potential for application in food packaging to extend the shelf life.

Innovative AI methods for monitoring front-of-package information: A case study on infant foods.

Front-of-package (FOP) is one of the most direct communication channels connecting manufacturers and consumers, as it displays crucial information such as certification, nutrition, and health. Traditional methods for obtaining information from FOPs often involved manual collection and analysis. To overcome these labor-intensive characteristics, new methods using two artificial intelligence (AI) approaches were applied for information monitoring of FOPs. In order to provide practical implementations, a case study was conducted on infant food products. First, FOP images were collected from Amazon.com. Then, from the FOP images, 1) the certification usage status of the infant food group was obtained by recognizing the certification marks using object detection. Moreover, 2) the nutrition and health-related texts written on the images were automatically extracted based on optical character recognition (OCR), and the associations between health-related texts were identified by network analysis. The model attained a 94.9% accuracy in identifying certification marks, unveiling prevalent certifications like Kosher. Frequency and network analysis revealed common nutrients and health associations, providing valuable insights into consumer perception. These methods enable fast and efficient monitoring capabilities, which can significantly benefit various food industries. Moreover, the AI-based approaches used in the study are believed to offer insights for related industries regarding the swift transformations in product information status.

Antioxidant and antimicrobial extracts from grape stalks obtained with subcritical water. Potential use in active food packaging development.

In order to valorise winemaking grape stalks, subcritical water extraction at 160 and 180 °C has been carried out to obtain phenolic-rich extracts useful for developing active food packaging materials. Red (R) and white (W) varieties (from Requena, Spain) were used, and thus, four kinds of extracts were obtained. These were characterised as to their composition, thermal stability and antioxidant and antibacterial activity. The extracts were incorporated at 6 wt% into polylactic acid (PLA) films and their effect on the optical and barrier properties of the films and their protective effect against sunflower oil oxidation was analysed. Carbohydrates were the major compounds (25-38%) in the extracts that contained 3.5-6.6% of phenolic compounds, the R extracts being the richest, with higher radical scavenging capacity. Every extract exhibited antibacterial effect against Escherichia coli and Listeria innocua, while PLA films with extracts preserved sunflower oil against oxidation.

Energy, nutrient and overall healthiness of processed packaged foods in Fiji, a comparison between 2018 and 2020.

In Fiji, packaged foods are becoming increasingly available. However, it is unknown if nutrition composition of these foods has changed. This study aims to assess changes in energy, nutrient content and healthiness of packaged foods by comparing data from five major supermarkets in Fiji in 2018 and 2020. Foods were categorised into 14 groups; nutrient composition information was extracted and healthiness assessed using Health Star Rating (HSR). Descriptive statistics and a separate matched products analysis was conducted summarising differences in nutrient content and HSR. There was limited evidence of change in the nutrient content of included products however, there was a small reduction in mean saturated fat in the snack food category (-1.0 g/100 g, 95% CI -1.6 to -0.4 g/100 g). The proportion of products considered healthy based on HSR, increased in the convenience foods category (28.4%, 95% CI 8.3 to 48.5) and decreased in non-alcoholic beverages (-35.2%, 95% CI -43.6 to -26.9). The mean HSR score increased in the fruit and vegetables category (0.1 (95% CI 0.1, 0.2)) and decreased for non-alcoholic beverages (-1.1 (-1.3, -0.9)) and the sauces, dressings, spreads, and dips category (-0.3 (-0.3, -0.2)). Strengthened monitoring of the food supply is needed to improve the healthiness of foods available.

Application progress of nanocellulose in food packaging: A review.

With the increasing environmental and ecological problems caused by petroleum-based packaging materials, the focus has gradually shifted to natural resources for the preparation of functional food packaging materials. In addition to biodegradable properties, nanocellulose (NC) mechanical properties, and rich surface chemistry are also fascinating and desired to be one of the most probable green packaging materials. In this review, we firstly introduce the recent progress of novel applications of NC in food packaging, including intelligent packaging, nano(bio)sensors, and nano-paper; secondly, we focus on the modification techniques of NC to summarize the properties (antimicrobial, mechanical, hydrophobic, antioxidant, and so on) that are required for food packaging, to expand the new synthetic methods and application areas. After presenting all the latest advances related to material design and sustainable applications, an overview summarizing the safety of NC is presented to promote a continuous and healthy movement of NC toward the field of truly sustainable packaging.

A novel biopolymeric composite edible film based on sunnhemp protein isolate and potato starch incorporated with clove oil: Fabrication, characterization, and amino acid composition.

Composite edible films were developed by casting method using sunnhemp protein isolate (SHPI) and potato starch (PS) at various proportions (100:0, 90:10, 80:20; 70:30, 60:40, and 50:50) containing glycerol as a plasticizer and clove oil. All the edible films were evaluated for thickness, moisture content, solubility, swelling ratio, water activity. Further characterization of edible films was done on the basis of mechanical, optical, thermal and structural attributes along with morphology. Among all the films, composite film containing 50 % SHPI, 50 % PS and 1 % clove oil were having better characteristics. The solubility and WVP decreased, while the tensile strength and elongation at break of composite film increased with the inclusion of potato starch and clove oil. Intermolecular interactions in the composite film matrix were confirmed by FTIR and XRD analysis. SEM images confirmed the structural compactness and integrity of all the developed films. The amino acid composition of edible films indicated presence of most of the essential amino acids. The present finding of this research work shows that the utilization of sunnhemp protein in the development of biocomposite edible films represents an alternative opportunity of sustainable edible food packaging.

Transparent, flexible, and eco-friendly starch-based films for reversible optoelectronic noses for food spoilage monitoring in smart packaging.

A reversible optoelectronic nose is presented consisting of ten acid-base indicators incorporated into a starch-based film, covering a wide pH range. The starch substrate is odorless, biocompatible, flexible, and exhibits high tensile resistance. This optical artificial olfaction system was used to detect the early stages of food decomposition by exposing it to the volatile compounds produced during the spoialge process of three food products (beef, chicken, and pork). A smartphone was used to capture the color changes caused by intermolecular interactions between each dye and the emitted volatiles over time. Digital images were processed to generate a differential color map, which uses the observed color shifts to create a unique signature for each food product. To effectively discriminate among different samples and exposure times, we employed chemometric tools, including hierarchical cluster analysis (HCA) and principal component analysis (PCA). This approach detects food deterioration in a practical, cost-effective, and user-friendly manner, making it suitable for smart packaging. Additionally, the use of starch-based films in the food industry is preferable due to their biocompatibility and biodegradability characteristics.

Next-generation all-organic composites: A sustainable successor to organic-inorganic hybrid materials.

This Review presents an overview of all-organic nanocomposites, a sustainable alternative to organic-inorganic hybrids. All-organic nanocomposites contain nanocellulose, nanochitin, and aramid nanofibers as highly rigid reinforcing fillers. They offer superior mechanical properties and lightweight characteristics suitable for diverse applications. The Review discusses various methods for preparing the organic nanofillers, including top-down and bottom-up approaches. It highlights in situ polymerization as the preferred method for incorporating these nanomaterials into polymer matrices to achieve homogeneous filler dispersion, a crucial factor for realizing desired performance. Furthermore, the Review explores several applications of all-organic nanocomposites in diverse fields including food packaging, performance-advantaged plastics, and electronic materials. Future research directions-developing sustainable production methods, expanding biomedical applications, and enhancing resistance against heat, chemicals, and radiation of all-organic nanocomposites to permit their use in extreme environments-are explored. This Review offers insights into the potential of all-organic nanocomposites to drive sustainable growth while meeting the demand for high-performance materials across various industries.

Application of poly(L-lactic acid)-based films for equilibrium modified atmosphere packaging of "Kyoho" grapes and its favorable protection for anthocyanins.

Grapes were packaged by different Poly (L-lactic acid)-based packaging films (PLTL-PLEL) and stored at 5 °C for 35 days to investigate the effects of equilibrium modified atmosphere packaging on the quality of "Kyoho" grapes during storage. Changes in physiochemical quality, antioxidant content and senescence of grapes were studied. Furthermore, UPLC-Q-TOF-MS/MS was used to observe and identify key factors influencing the variation of grape anthocyanins under different atmosphere conditions. Alterations in gas components and enzyme activities significantly impacted anthocyanin levels, highlighting oxygen concentration as the primary influence on total anthocyanin levels. The PLTL-PLEL50 packaging resulted in an approximate 5.7% lower weight loss and increased soluble solids by approximately 14.4%, vitamin C, total phenols and flavonoids reaching 60.2 mg/100 g, 8.4 mg/100 g and 7.2 mg/100 g, respectively. This packaging also preserved higher anthocyanin levels, with malvidin-3-glucoside and peonidin-3-glucoside at 0.55 µg/mL and 1.62 µg/mL, respectively, on the 35th day of storage.

Advanced ethylene-absorbing and cushioning depending on the 3D porous-structured fruit packaging: Toward polyurethane foam manipulation using zein and soybean oil polyol substrates.

Fruits are essential sources of nutrients in our daily diet; however, their spoilage is often intensified by mechanical damage and the ethylene phytohormone, resulting in significant economic losses and exacerbating hunger issues. To address these challenges, this study presented a straightforward in situ synthesis protocol for producing Z/SOPPU foam, a 3D porous-structured fruit packaging. This innovative packaging material offered advanced ethylene-adsorbing and cushioning capabilities achieved through stirring, heating, and standing treatments. The results demonstrated that the Z/SOPPU foam, with its porous structure, served as an excellent packaging material for fruits, maintaining the intact appearance of tomatoes even after being thrown 72 times from a height of 1.5 m. Additionally, it exhibited desirable hydrophobicity (contact angle of 114.31 ± 0.82°), degradability (2.73 ± 0.88 % per 4 weeks), and efficient ethylene adsorption (adsorption rate of 13.2 ± 1.7 mg/m3/h). These remarkable characteristics could be attributed to the unique 3D micron-porous configuration, consisting of soybean oil polyol polyurethane foam for mechanical strain cushioning and zein for enhanced ethylene adsorption efficiency. Overall, this research offers an effective and original approach to the rational design and fabrication of advanced bio-based fruit packaging.

Quantitative analysis of molecular interactions in κ-carrageenan-Isovanillin biocomposite for biodegradable packaging and pharmaceutical applications using NMR, TOF-SIMS, and XPS approach.

This study explores the molecular interactions and structural changes in κ-carrageenan crosslinked with isovanillin to create a biocomposite material suitable for hard capsule and bio-degradable packaging applications. Proton Nuclear Magnetic Resonance (1H NMR) spectroscopy revealed chemical changes in the conjugate molecule, indicating improved electronegativity due to intermolecular hydrogen bonding between κ-carrageenan and isovanillin. Time-of-flight Secondary Ion Mass Spectrometry (ToF-SIMS) analysis revealed enhanced ion intensity due to intermolecular interactions, particularly between sulphate and hydrogen ions. X-ray Photoelectron Spectroscopy (XPS) study demonstrated that κ-carrageenan and isovanillin form stronger hydrogen bonds, with a shift in binding energy indicating higher electronegativity. These findings shed light on the molecular mechanisms that underpin the formation of the biocomposite material, as well as its potential for use in hard capsule and biodegradable packaging materials, addressing the need for sustainable alternatives in the pharmaceutical and packaging industries while also contributing to environmental conservation.

Physicochemical properties of active films of rose essential oil produced using soy protein isolate-polyphenol conjugates for cherry tomato preservation.

Soy protein isolate (SPI)-polyphenol conjugates were produced by grafting SPI individually with curcumin, naringenin, and catechin. The resulting conjugates showed better emulsifying properties and were used to develop active films containing rose essential oil. The effect of conjugation on the physicochemical and mechanical properties of these emulsion-based films was evaluated. The results showed that the barrier and mechanical properties of the films were improved when the SPI-polyphenol conjugates were used to emulsify the essential oil; in particular, the SPI-curcumin conjugate showed significant improvement. The improvements on the water vapor and oxygen barrier properties in the films were attributed to the formation of compact structure. Emulsion-based films stabilized by SPI-polyphenol conjugates showed antioxidant and antibacterial activities. They also demonstrated an ability to extend the shelf life of cherry tomatoes, as indicated by better preservation of weight, firmness, and ascorbic acid content.

Impact of light on protective fractions of Cu in white wine: Influence of oxygen and bottle colour.

Cu(II)-organic acid (fraction I) and Cu(I)-thiol (fraction II) complexes can suppress sulfhydryl off-aromas in wine. This study investigated the impact of light exposure on the protective fractions of Cu of bottled white wine. Fluorescent light-exposed Chardonnay with two initial concentrations of dissolved oxygen (0.5 and 10 mg/L) was stored in different coloured bottles and concentrations of Cu fractions and riboflavin, a photo-initiator at 370-440 nm, were measured during 110 days storage. Light-exposed wines with lower oxygen concentrations resulted in a 100-fold decrease in the Cu fraction I half-life, and a 60-fold decrease for Cu fractions I and II combined. The half-life for Cu fraction I decay during light exposure was extended 30-fold with the use of brown compared to flint glass. Light exposure can rapidly exhaust the protective Cu fractions in wine, and bottles with less light transmission below 440 nm can slow this loss.

Applications and characterization of anti-browning enzymatically modified potato starch (EPS) film associated with chitosan (CTS)/L-Cys/citric acid (CA) on fresh-cut potato slices.

This study explores the influence of incorporating L-cysteine (L-Cys), chitosan (CTS), and citric acid (CA) on the enzymatic modification of potato starch (EPS) films to enhance anti-browning properties. Four types of EPS composite films were evaluated for preserving fresh-cut potato slices at low temperatures to inhibit browning. Their thermal, physiochemical, mechanical, and digestibility properties were assessed. Results indicate that the addition of CTS, CA, and L-Cys improved the anti-browning activity of the EPS films by increasing film thickness and reducing water vapor permeability (WVP), oxygen transmission rate (OTR), ultraviolet (UV) transmittance, and tensile strength (TS). Furthermore, these additives improved the film's microstructure, resulting in reinforced intermolecular interactions, increased elongation at break, heightened crystallinity, enhanced thermal stability, and favorable gastrointestinal digestibility. Overall, EPS/CTS/L-Cys/CA composite films show promise as edible packaging materials with effective anti-browning properties.