Electrochemical Nanosensor for the Simultaneous Determination of Anticancer Drugs Epirubicin and Topotecan Using UiO-66-NH2/GO Nanocomposite Modified Electrode.

In this work, UiO-66-NH2/GO nanocomposite was prepared using a simple solvothermal technique, and its structure and morphology were characterized using field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDS), and X-ray diffraction (XRD). An enhanced electrochemical sensor for the detection of epirubicin (EP) was proposed, which utilized a UiO-66-NH2/GO nanocomposite-modified screen-printed graphite electrode (UiO-66-NH2/GO/SPGE). The prepared UiO-66-NH2/GO nanocomposite improved the electrochemical performance of the SPGE towards the redox reaction of EP. Under optimized experimental conditions, this sensor demonstrates a remarkable limit of detection (LOD) of 0.003 µM and a linear dynamic range from 0.008 to 200.0 µM, providing a highly capable platform for sensing EP. Furthermore, the simultaneous electro-catalytic oxidation of EP and topotecan (TP) was investigated at the UiO-66-NH2/GO/SPGE surface utilizing differential pulse voltammetry (DPV). DPV measurements revealed the presence of two distinct oxidation peaks of EP and TP, with a peak potential separation of 200 mV. Finally, the UiO-66-NH2/GO/SPGE sensor was successfully utilized for the quantitative analysis of EP and TP in pharmaceutical injection, yielding highly satisfactory results.

LC-MS-MS Determination of Cytostatic Drugs on Surfaces and in Urine to Assess Occupational Exposure.

The ever-increased usage of cytostatic drugs leads to high risk of exposure among healthcare workers. Moreover, workers are exposed to multiple compounds throughout their lives, leading to cumulative and chronic exposure. Therefore, multianalyte methods are the most suitable for exposure assessment, which minimizes the risks from handling cytostatic drugs and ensures adequate contamination containment. This study describes the development and full validation of two liquid chromatography-tandem mass spectrometry methods for the detection of gemcitabine, dacarbazine, methotrexate, irinotecan, cyclophosphamide, doxorubicinol, doxorubicin, epirubicin, etoposide, vinorelbine, docetaxel and paclitaxel in working surfaces and urine samples. The urine method is the first to measure vinorelbine and doxorubicinol. For surfaces, limits of detection (LOD) and limits of quantification (LOQ) were 5-100 pg/cm2, and linearity was achieved up to 500 pg/cm2. Inaccuracy was between -11.0 and 8.4%. Intra-day, inter-day and total imprecision were <20%, except for etoposide and irinotecan (<22.1%). In urine, LOD and LOQ were 5-250 pg/mL, with a linear range up to 1,000-5,000 pg/mL. Inaccuracy was between -3.8 and 14.9%. Imprecision was <12.4%. Matrix effect was from -58.3 to 1,268.9% and from -66.7 to 1,636% in surface and urine samples, respectively, and extraction efficiency from 10.8 to 75% and 47.1 to 130.4%, respectively. All the analytes showed autosampler (6°C/72 h), freezer (-22°C/2 months) and freeze/thaw (three cycles) stability. The feasibility of the methods was demonstrated by analyzing real working surfaces and patients' urine samples. Contamination with gemcitabine, irinotecan, cyclophosphamide, epirubicin and paclitaxel (5-4,641.9 pg/cm2) was found on biological safety cabinets and outpatients' bathrooms. Analysis of urine from patients under chemotherapy identified the infused drugs at concentrations higher than the upper LOQ. These validated methods will allow a comprehensive evaluation of both environmental and biological contamination in hospital settings and healthcare workers.

Novel CMC-CdTe / ZnS QDs Nanosensor for the Detection of Anticancer Drug Epirubicin.

Epirubicin (EPI) is one of the standard anticancer drugs that apply for various cancers treatment. However, the accumulation of EPI in the human body can be highly toxic, and it causes inevitable harm to organs. As a result, the evaluation of low concentrations of this drug in body samples requires sensitive, rapid, and accurate analysis methods. The fluorescence method is an efficient way in comparison of the traditional methods such as liquid chromatography, capillary electrophoresis, and electrochemical methods. Herein, we synthesized a novel fluorescence nanosensor named CMC-CdTe/ZnS based on using quantum dots (QDs). The structure of the prepared nanosensor is confirmed by different analysis methods such as FT-IR, TGA, and TEM. Besides that, the fluorescence intensity response of CMC-CdTe/ZnS QDs in the presence of Epirubicin drug is investigated. Based on obtained results, not only this nanosensor developed, but also the fluorescence quenching was explained by the typical Stern-Volmer equation. The best linear quenching equation for entitled nanosensor in the presence of Epirubicin is F0/F = 0.0346Q + 1.08 (R2 = 0.99), and the detection limit of Epirubicin is around 0.04 × 10-6 mol/L at 25 °C. All of the results display that this method could be reliable and suitable approach for determination of Epirubicin in commercial samples as well.

Chemotaxis-based smart drug delivery of epirubicin using a 3D printed microfluidic chip.

Recent developments on self-propelled microdroplets, moving controllably in response to an external stimulus like chemical, electrical, or magnetic field, have opened a new horizon for smart drug delivery investigations. On the other hand, the new achievements in 3D printing technology has provided a promising option for the fabrication of microfluidic devices, which is an unrivalled platform for in-vitro drug delivery studies. By synergizing the features of chemotaxis, 3D printing, and microfluidic techniques a new approach was introduced to deliver the drug to targeted sites with a well-controlled method and a reasonable speed. A self-propelled ionic liquid ([P6,6,6,14][Cl]) microdroplet, as the drug carrier, was utilised for the targeted delivery of epirubicin anticancer drug within an integrated drug delivery microfluidic system. The asymmetric diffusion of [P6,6,6,14]+ ion from the microdroplet into an aqueous solution with chloride gradient concentration (created under an external electrical field) caused the microdroplet to move. The spatial and temporal position of the moving microdroplet could be controlled by changing the magnitude and polarity of the external electrical field. A piece of hollow-fiber, fixed next to the anode, was filled with phosphate buffer (as the receptor) and used to remove the drug from the carrier. The receptor solution was then taken and injected into a HPLC system for quantification of the released drug. After one-at-a-time optimization of the channel geometry and electrolyte concentration, the experimental variables affecting the drug loading including contact time, pH, and volume of carrier were optimized via a central composite design (CCD) approach.

A fully validated simple new method for environmental monitoring by surface sampling for cytotoxics.

A wipe sampling procedure followed by a simple ultra-performance liquid chromatography - tandem mass spectrometry (UPLC-MS/MS) method was developed and validated for simultaneous quantification of six cytotoxic drugs: 5-fluorouracil (5FU), doxorubicin (DOXO), epirubicin (EPI), ifosfamide (IF), cyclophosphamide (CP) and gemcitabine (GEM), as surrogate markers for occupational exposure. After a solid-phase extraction of wiping filter on 10 × 10 cm surface, the separation was performed within 6.5 min, using a gradient mobile phase and the analytes were detected by mass spectrometry in the multiple reaction ion monitoring mode. The method was validated according to the recommendations of the US Food and Drug Administration. The method was linear (r2 > 0.9912) between 2.5 and 200 ng per wiping sample (25 to 2000 pg/cm2) for 5FU, doxorubicin and epirubicin and between 0.2 and 40 ng per wiping sample (2 to 400 pg/cm2) for cyclophosphamide, ifosfamide and gemcitabine. The lower limits of quantification were 2.5 ng (25 pg/ cm2) for 5FU, doxorubicin and epirubicin, and 0.2 ng (2 pg/cm2) for CP, IF and GEM. Within-day and between-day imprecisions were <14.0, 10.6, 11.1, 8.7, 11.2 and 10.9% for 5-fluorouracil, doxorubicin, epirubicin, ifosfamide cyclophosphamide and gemcitabine, respectively. The inaccuracies did not exceed 2.7, 10.9, 1.1, 4.5, 1.6 and 2.9% for the studied molecules, respectively. This new sensitive validated method for surface contamination studies of cytotoxics was successfully applied on different localizations in hospital. This approach is particularly suitable to assess occupational exposure risk to cytotoxic drugs.

Cerium-doped flower-shaped ZnO nano-crystallites as a sensing component for simultaneous electrochemical determination of epirubicin and methotrexate.

A glassy carbon electrode (GCE) was modified with cerium-doped ZnO nanoflowers (Ce-ZnO/GCE) to obtain a sensor for direct simultaneous detection of the cancer drugs epirubicin and methotrexate. XRD, SEM and EDX techniques were used to characterize their morphology and structure. Electrochemical impedance spectroscopy was applied to characterize the electrochemical features of the modified GCE. The experimental conditions were optimized. Diffusion coefficients and heterogeneous rate constants were determined for the oxidation of epirubicin. The differential pulse voltammetric response to epirubicin has a peak near 0.7 V (vs. Ag/AgCl at a scan rate of 50 mV s-1) and is linear in the 0.01 to 600 µM concentration range, and the detection limit is 2.3 nM (S/N = 5). The differential pulse voltammetric response to methotrexate has a peak near 0.75 V (vs. Ag/AgCl and the same scan rate) and is linear in the 0.01 to 500 µM concentration range, and the detection limit is 6.3 nM (S/N = 5). The method was applied to the simultaneous determination of epirubicin and methotrexate in pharmaceutical injections and in spiked diluted blood specimens. Graphical abstractSchematic of an electrochemical sensor based on Ce-doped ZnO nano-flowers modified glassy carbon electrode for detecting epirubicin.

Comparison of gemcitabine and anthracycline antibiotics in prevention of superficial bladder cancer recurrence.

BACKGROUND: Because of the failure, shortage and related toxicities of Bacillus Calmette-Guérin (BCG), the other intravesical chemotherapy drugs are also widely used in clinical application. Gemcitabine and anthracycline antibiotics (epirubicin and pirarubicin) are widely used as first-line or salvage therapy, but which drug is better is less discussed. METHODS: A total of 124 primary NMIBC patients administered intravesical therapy after transurethral resection of bladder tumor (TURBT) at Nanjing Drum Tower hospital from January 1996 to July 2018. After TURBT, all patients accepted standard intravesical chemotherapy. Recurrence was defined as the occurrence of a new tumor in the bladder. Progression was defined as confirmed tumor invading muscular layer. Treatment failure was defined as need for radical cystectomy (RC), systemic chemotherapy and radiation therapy. RESULTS: Of the 124 patients who underwent intravesical chemotherapy, 84 patients were given gemcitabine, 40 patients were given epirubicin or pirarubicin, with mean follow-up times (mean ± SD) of (34.8 ± 17.9) and (35.9 ± 22.1) months respectively. The clinical and pathological features of patients show no difference between two groups. Recurrence rate of patients given gemcitabine was 8.33% (7 out of 84), the recurrence rate was 45% (18 out of 40) for epirubicin or pirarubicin (P < 0.0001). The progression rates of gemcitabine, anthracycline antibiotics groups were 2.38% (2 out of 84) and 20% (8 out of 40), respectively (P < 0.001). The rate of treatment failure is 8.33% (7 out of 84) and 25% (10 out of 40), respectively (P = 0.012). Gemcitabine intravesical chemotherapy group was significantly related to a lower rate of recurrence (HR = 0.165, 95% CI 0.069-0.397, P = 0.000), progression (HR = 0.160, 95% CI 0.032-0.799, P = 0.026) and treatment failure (HR = 0.260, 95% CI 0.078-0.867, P = 0.028). CONCLUSION: In conclusion, gemcitabine intravesical chemotherapy group was significantly related to a lower rate of recurrence, progression and treatment failure. Gemcitabine could be considered as a choice for these patients who are not suitable for BCG.

Qualitative and quantitative analysis of therapeutic solutions using Raman and infrared spectroscopy.

Anticancer drugs are prescribed and administrated to an increasing number of patients on a daily basis. As a consequence, a number of concerns have been raised about the patient health and safety in the case that the drugs administered are not at the required concentration or even worse not the correct ones. Quality control of therapeutic solutions has therefore been extensively implemented in hospital environments, in order to avoid any failure in the intense workflow faced by administering pharmacists. In the present study, infrared (IR) and Raman spectroscopy have been employed for the analysis of 3 commercially available therapeutic solutions TEVA®, MYLAN®, CERUBIDINE®, respectively containing doxorubicin, epirubicin and daunorubicin. They perfectly illustrate the analytical difficulties encountered, as these 3 chemotherapeutic drugs are isomers, hardly distinguishable with conventional approaches such as UV/VIS spectrometry. Any analytical failure to identify these molecules can lead to delays in patient treatment. While Partial Least Squares Regression analysis demonstrates that both Raman and IR can deliver satisfactory quantitative analysis in the clinical range, with respective Root Mean Square Error of Cross Validation (RMSECV) between 0.0127 - 0.0220 g·L-1 and 0.0573 - 0.0759 g·L-1, the identification rate between the 2 techniques differs substantially. Indeed, Principal Component Analysis - Factorial Discriminant Analysis (PCA-FDA) highlights that, depending on the data preprocessing applied to Raman spectra, the discrimination between the 3 drugs is decreased, with in some cases specificity and sensitivity below 50%. However, IR analysis displays encouraging results with an overall specificity and sensitivity between 99 and 100%, suggesting that reliable validation of the therapeutic solution for administration to patients can be achieved. IR and Raman spectroscopy could assist and support quality control of chemotherapeutic solutions prepared in personalised concentrations for each patient. The effective and reliable characterisation of therapeutic solutions could have a lot to offer to improve current practices in a near future.

An eco-friendly stability-indicating spectrofluorimetric method for the determination of two anticancer stereoisomer drugs in their pharmaceutical preparations following micellar enhancement: Application to kinetic degradation studies.

A new rapid and highly sensitive stability-indicating spectrofluorimetric method was developed for the determination of two stereoisomers anticancer drugs, doxorubicin (DOX) and epirubicin (EPI) in pure form and in pharmaceutical preparations. The fluorescence spectral behavior of DOX and EPI in a sodium dodecyl sulfate (SDS) micellar system was investigated. It was found that the fluorescence intensity of DOX and EPI in an aqueous solution of phosphate buffer pH4.0 and in the presence of SDS was greatly (about two fold) enhanced and the mechanism of fluorescence enhancement effect of SDS on DOX was also investigated. The fluorescence intensity of DOX or EPI was measured at 553nm after excitation at 497nm. The plots of fluorescence intensity versus concentration were rectilinear over a range of 0.03-2µg/mL for both DOX and EPI with good correlation coefficient (r>0.999). High sensitivity to DOX and EPI was attained using the proposed method with limits of detection of 10 and 9ng/mL and limits of quantitation of 29 and 28ng/mL, for DOX and EPI, respectively. The method was successfully applied for the determination of DOX and EPI in biological fluids and in their commercial pharmaceutical preparations and the results were concordant with those obtained using a previously reported method. The application of the proposed method was extended to stability studies of DOX following different forced degradation conditions (acidic, alkaline, oxidative and photolytic) according to ICH guidelines. Moreover, the kinetics of the alkaline and oxidative degradation of DOX was investigated and the apparent first-order rate constants and half-life times were calculated.

Compatibility of epirubicin-loaded DC bead™ with different non-ionic contrast media.

PURPOSE: The aim of this study was to determine the compatibility of epirubicin-loaded DC bead™ with different non-ionic contrast media over a period of seven days when stored light protected under refrigerated conditions. METHODS: DC bead™ (2 ml) (Biocompatibles UK Ltd) of the bead size 70-150 µm ( = DC bead M1) or bead size 100-300 µm were loaded with 75 mg epirubicin powder formulation (Farmorubicin® dissolved in 3 ml water for injection to a concentration of 25 mg/ml) or 76 mg epirubicin injection solution (Epimedac® 2 mg/ml) within 2 h or 6 h, respectively. After removal of the excess solution, the epirubicin-loaded beads were mixed in polypropylene syringes with an equal volume (∼1.5 ml) of contrast media, i.e. Accupaque™ 300 (Nycomed Inc.), Imeron® 300 (Bracco S.p.A), Ultravist® 300 (Bayer Pharma AG), Visipaque™ 320 (GE Healthcare) and agitated in a controlled manner to get a homogenous suspension. Syringes with loaded beads in contrast media were stored protected from light under refrigeration (2-8℃). Compatibility was determined by measuring epirubicin concentrations in the suspensions in triplicate on day 0, 1, and 7. A reversed phase high-performance liquid chromatography assay with ultraviolet detection was utilized to analyze the concentration and purity of epirubicin. RESULTS: Mixing of epirubicin-loaded beads with different non-ionic contrast media released 0.1-0.5% of epirubicin over a period of 24 h, irrespectively, of the DC bead™ size or type of contrast media. No further elution or degradation was observed after seven days when the admixtures were stored protected from light under refrigeration. CONCLUSION: Compatibility of epirubicin-loaded DC bead™ with an equal volume of different contrast media in polypropylene syringes is given over a period of seven days. Due to a maximum elution of 0.1-0.5% of epirubicin from loaded DC bead™, admixtures with contrast media can be prepared in advance in centralized cytotoxic preparation units. Microbiological aspects have to be considered when determining the expiration date of the product.

Facile one-pot synthesis of a aptamer-based organic-silica hybrid monolithic capillary column by "thiol-ene" click chemistry for detection of enantiomers of chemotherapeutic anthracyclines.

In the current study, we developed a facile strategy for the one-pot synthesis of an aptamer-based organic-silica hybrid monolithic capillary column. A 5'-SH-modified aptamer, specifically targeting doxorubicin, was covalently modified in the hybrid silica monolithic column by a sol-gel method combined with "thiol-ene" click reaction. The prepared monolithic column had good stability and permeability, large specific surface, and showed excellent selectivity towards chemotherapeutic anthracyclines of doxorubicin and epirubicin. In addition, the enantiomers of doxorubicin and epirubicin can be easily separated by aptamer-based affinity monolithic capillary liquid chromatography. Furthermore, doxorubicin and epirubicin spiked in serum and urine were also successfully determined, which suggested that the complex biological matrix had a negligible effect on the detection of doxorubicin and epirubicin. Finally, we quantified the concentration of epirubicin in the serum of breast cancer patients treated with epirubicin by intravenous injection. The developed analytical method is cost-effective and rapid, and biological samples can be directly analyzed without any tedious sample pretreatment, which is extremely useful for monitoring medicines in serum and urine for pharmacokinetic studies.

The contribution of Raman spectroscopy to the analytical quality control of cytotoxic drugs in a hospital environment: eliminating the exposure risks for staff members and their work environment.

The purpose of the study was to perform a comparative analysis of the technical performance, respective costs and environmental effect of two invasive analytical methods (HPLC and UV/visible-FTIR) as compared to a new non-invasive analytical technique (Raman spectroscopy). Three pharmacotherapeutic models were used to compare the analytical performances of the three analytical techniques. Statistical inter-method correlation analysis was performed using non-parametric correlation rank tests. The study's economic component combined calculations relative to the depreciation of the equipment and the estimated cost of an AQC unit of work. In any case, analytical validation parameters of the three techniques were satisfactory, and strong correlations between the two spectroscopic techniques vs. HPLC were found. In addition, Raman spectroscopy was found to be superior as compared to the other techniques for numerous key criteria including a complete safety for operators and their occupational environment, a non-invasive procedure, no need for consumables, and a low operating cost. Finally, Raman spectroscopy appears superior for technical, economic and environmental objectives, as compared with the other invasive analytical methods.

Extraction protocol and mass spectrometry method for quantification of doxorubicin released locally from prodrugs in tumor tissue.

The localized conversion of inactive doxorubicin prodrug chemotherapeutics to pharmacalogically active forms is difficult to quantify in mouse tumor models because it occurs only in small regions of tissue. The tumor tissue extraction protocol and LC-MS/MS analysis method described here were optimized to obtain a detection limit of 7.8 pg for the activated doxorubicin and 0.36 ng for the doxorubicin prodrug. This method can be useful for determining the biodistribution and activation efficiency for many different doxorubicin prodrugs. It can also be used for quantification of doxorubicin from tumor models that have poor vascularization resulting in low tissue accumulation.

[The Raman Spectroscopy (RS): A new tool for the analytical quality control of injectable in health settings. Comparison of RS technique versus HPLC and UV/Vis-FTIR, applied to anthracyclines as anticancer drugs]. / La Spectroscopie Raman (SR) : un nouvel outil adapté au contrôle de qualité analytique des préparations injectables en milieu de soins. Comparaison de la SR aux techniques CLHP et UV/visible-IRTF appliquée à la classe des anthracyclines en cancérologie.

The study compares the performances of three analytical methods devoted to Analytical Quality Control (AQC) of therapeutic solutions formed into care environment, we are talking about Therapeutics Objects(TN) (TOs(TN)). We explored the pharmacological model of two widely used anthracyclines i.e. adriamycin and epirubicin. We compared the performance of the HPLC versus two vibrational spectroscopic techniques: a tandem UV/Vis-FTIR on one hand and Raman Spectroscopy (RS) on the other. The three methods give good results for the key criteria of repeatability, of reproducibility and, of accuracy. A Spearman and a Kendall correlation test confirms the noninferiority of the vibrational techniques as an alternative to the reference method (HPLC). The selection of bands for characterization and quantification by RS is the results of a gradual process adjustment, at the intercept of matrix effects. From the perspective of a AQC associated to release of TOs, RS displays various advantages: (a) to decide quickly (~2min), simultaneously and without intrusion or withdrawal on both the nature of a packaging than on a solvant and this, regardless of the compound of interest; it is the founder asset of the method, (b) to explore qualitatively and quantitatively any kinds of TOs, (c) operator safety is guaranteed during production and in the laboratory, (d) the suppression of analytical releases or waste contribute to protects the environment, (e) the suppression.of consumables, (f) a negligible costs of maintenance, (g) a small budget of technicians training. These results already show that the SR technology is potentially a strong contributor to the safety of the medication cycle and fight against the iatrogenic effects of drugs.

Occurrence of cyclophosphamide and epirubicin in wastewaters by direct injection analysis-liquid chromatography-high-resolution mass spectrometry.

BACKGROUND, AIM, AND SCOPE: According to the high incidence of cancer worldwide, the amount of cytostatic drugs administered to patients has increased. These compounds are excreted to wastewaters, and therefore become potential water contaminants. At this stage, very little is known on the presence and elimination of cytostatic compounds in wastewater treatment plants (WWTP). The aim of this study was to develop a liquid chromatography-high-resolution mass spectrometry (LC-Orbitrap-MS) method for the determination of cyclophosphamide and epirubicin in wastewaters. These compounds represent two outmost used cytostatic agents. MATERIALS AND METHODS: Extraction and analytical conditions were optimized for cyclophosphamide and epirubicin in wastewater. Both solid-phase extraction using Oasis 200 mg hydrophilic-lipophilic balanced (HLB) cartridges and direct injection analysis were evaluated. Mass spectral characterization and fragmentation conditions were optimized at 50,000 resolving power (full width at half maximum, m/z 200) to obtain maximum sensitivity and identification performance. Quality parameters (recoveries, limits of detection, and repetitivity) of the methods developed were determined, and best performance was obtained with direct water analysis of the centrifuged wastewater. Finally, this method was applied to determine the presence of cyclophosphamide and epirubicin in wastewaters from a hospital effluent, an urban effluent, and influents and effluents from three WWTP. RESULTS AND DISCUSSION: Cyclophosphamide and epirubicin were recovered after 50 mL preconcentration on solid-phase extraction 200 mg Oasis HLB cartridges (87% and 37%, respectively), and no breakthrough was observed by extracting 500 mL of water. Limits of detection were of 0.35 and 2.77 ng/L for cyclophosphamide and epirubicin, respectively. On the other hand, direct injection of water spiked at 1 µg/L provided recoveries of 107% for cyclophosphamide and 44% for epirubicin and limits of detection from 3.1 to 85 ng L(-1), respectively. The analysis of wastewaters using direct injection analysis revealed the presence of cyclophosphamide and epirubicin in WWTP influents and hospital and urban effluents at levels ranging from 5.73 to 24.8 µg L(-1). CONCLUSIONS: The results obtained in this study demonstrate the capability of LC-Orbitrap-MS for accurate trace analysis of these very polar contaminants. This method permitted to identify cyclophosphamide and epirubicin in wastewaters and influents of WWTP, but no traces were detected in WWTP effluents. The methodology herein developed is sensitive and robust and applicable for screening of a large number of samples since no preconcentration is needed.

Wipe sampling procedure coupled to LC-MS/MS analysis for the simultaneous determination of 10 cytotoxic drugs on different surfaces.

A simple wipe sampling procedure was developed for the surface contamination determination of ten cytotoxic drugs: cytarabine, gemcitabine, methotrexate, etoposide phosphate, cyclophosphamide, ifosfamide, irinotecan, doxorubicin, epirubicin and vincristine. Wiping was performed using Whatman filter paper on different surfaces such as stainless steel, polypropylene, polystyrol, glass, latex gloves, computer mouse and coated paperboard. Wiping and desorption procedures were investigated: The same solution containing 20% acetonitrile and 0.1% formic acid in water gave the best results. After ultrasonic desorption and then centrifugation, samples were analysed by a validated liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) in selected reaction monitoring mode. The whole analytical strategy from wipe sampling to LC-MS/MS analysis was evaluated to determine quantitative performance. The lowest limit of quantification of 10 ng per wiping sample (i.e. 0.1 ng cm(-2)) was determined for the ten investigated cytotoxic drugs. Relative standard deviation for intermediate precision was always inferior to 20%. As recovery was dependent on the tested surface for each drug, a correction factor was determined and applied for real samples. The method was then successfully applied at the cytotoxic production unit of the Geneva University Hospitals pharmacy.

[Preparation and quality control of compound epirubicin hydrochloride-loaded polymeric nanoparticles of L-lactic-co-glycolic acid].

OBJECTIVE: To prepare compound epirubicin hydrochloride-loaded polymeric nanoparticles of L-lactic-co-glycolic acid and establish their quality control. METHODS: The emulsion-solvent evaporation method was employed to prepare and freeze-dry the compound epirubicin hydrochloride-loaded polymeric nanoparticles of L-lactic-co-glycolic acid after the addition of lactose. The contents and cumulative release of epirubicin hydrochloride and dimeglumine gadopentetate were detected simultaneously by RP-HPLC (reverse phase-high performance liquid chromatography). RESULTS: The above nanoparticles were prepared and the quality standards for simultaneously determining the contents of epirubicin hydrochloride and dimeglumine gadopentetate established primarily. The contents of epirubicin hydrochloride and dimeglumine gadopentetate in compound preparation were 100.6% ± 1.6% and 99.1% ± 1.9% respectively. And two compositions could be completely released within 9 days. CONCLUSION: The preparation method of nanoparticles is simple and their quality control feasible.

Stability of epidoxorubicin in solid state.

The influence of temperature and relative air humidity on the stability of epidoxorubicin hydrochloride (EP) was investigated. The degradation of the substance studied was determined: (a) in dry air at 393K, (b) at relative air humidity ~76% at 333K, 343K, 353K, 363K and 373K, (c) in the relative air humidity range 50-90% at 363K. The degradation of EP in the atmosphere of increased relative air humidity was a first-order reaction relative to substance concentration and in dry, hot air (RH 0%; 393K) is a reversible first-order reaction relative to substance concentration. The dependences lnk=f(1/T) and lnk=f(RH%) were described by the equation: lnk=(35.1±10.9)-(16,250±3823)(1/T) and lnk=(3.79±3.34) × 10(-2) (RH%)-(12.9±2.4), respectively. The kinetic and thermodynamic parameters of EP degradation were calculated. The parameters of separation were following: LiChrospher RP-18 column, 5 µm, 250 mm × 4 mm; mobile phase: the mixture of equal volume of acetonitrile and the solution containing 2.88 gl(-1) of sodium laurisulfate and 2.25 ml l(-1) of phosphoric acid (V) 85%; flow rate: 1.0 ml min (-1); UV detection - 254 nm.

Measurement of intracellular accumulation of anthracyclines in cancerous cells by direct injection of cell lysate in MEKC/LIF detection.

Anthracyclines are chemotherapeutic drugs that are broadly used in the treatment of various types of solid cancers and leukemia. Herein, we report on a novel analytical method for intracellular accumulation of anthracyclines using MEKC/LIF detection. An aqueous separation system permitted the injection of cell lysates directly into the capillary. The MEKC migrating solution was made up of borate buffer at pH 9.22 containing sodium taurodeoxycholate, (2-hydroxypropyl)-gamma-CD, and SDS. The anthracyclines, Doxorubicin (DOX) and epirubicin (EPI) were detected by LIF using a Nd:YAG laser (532 nm) or an argon ion laser (488 nm) for excitation. Two cell lines, human humerus tumor cells (RDES) and human lung tumor cells (A549), were treated with a mixture of the two anthracyclines for fixed periods of time, and then intracellular concentrations were determined by injecting cell lysates directly. Recovery values of 96.0-100.8% were obtained for DOX and EPI. Reproducibility quantified by RSD was less than 3.9% intraday and 6.7% interday at concentrations ranging between 50 and 500 nM. The uptake of EPI was found to be slightly less than that of DOX for A549, but higher levels of EPI were observed in RDES. Intracellular accumulation of anthracyclines was greater in RDES than in A549, but both types of cells excreted anthracyclines after 12 h. These results indicate that MEKC with an aqueous medium is useful for investigating intracellular uptake and accumulation of drugs, since cell lysates can be used directly with no pretreatment such as deproteination or solvent extraction of analytes.

CE-LIF method for the separation of anthracyclines: application to protein binding analysis in plasma using ultrafiltration.

Anthracyclines are chemotherapeutic drugs that are widely used in the treatment of cancers such as lung and ovarian cancers. The simultaneous determination of the anthracyclines, daunorubicin, doxorubicin and epirubicin, was achieved using CE coupled to LIF, with an excitation and emission wavelength of 488 and 560 nm, respectively. Using a borate buffer (105 mM, pH 9.0) and 30% MeOH, a stable and reproducible separation of the three anthracyclines was obtained. The method developed was shown to be capable of monitoring the therapeutic concentrations (50-50 000 ng/mL) of anthracyclines. LODs of 10 ng/mL, calculated at an S/N = 3, were achieved. Using the CE method developed, the in vitro protein binding to plasma was measured by ultrafiltration, and from this investigation the estimated protein binding was determined to be in the range of 77-94%.