Oral health knowledge, attitude and practice among parents of children with craniofacial syndromes.

Parents play an important role in caring for their children's oral health, especially for those with craniofacial deformities. In this study, we analyzed the oral health knowledge, attitude and practice (KAP) among parents of children of 1 to 16 years-of-age with craniofacial syndromes (CS) at Universiti Malaya Medical Center (UMMC), Malaysia. This was a case-controlled study conducted between March and December 2021 involving 30 parents of children with CS and 30 parents of normal children as controls. A modified validated KAP questionnaire was distributed to all parents. Statistical analysis was carried out using SPSS 26.0 and descriptive analysis was performed, with data expressed as mean, standard deviation, frequency and percentage (%). Most respondents from both groups were mothers (73.3%) between 31 to 40 years-of-age. Both groups of parents had similar levels of oral health knowledge; there was no significant difference between the two groups for 10 of the KAP questions (p > 0.05). However, there was a significant different between the two groups with regards to two 2 relating to the definition of plaque and its relationship to dental caries (p = 0.035 and p = 0.032, respectively). Some parents of CS children believed that primary teeth were not important (23.33%) and were not concerned if their children showed changes in tooth color (26.67%). Despite parental acknowledgement of ideal practice, both groups of children showed irregular dental attendance and reduced toothbrushing frequency. Parents of children with CS had a similar depth of oral health knowledge and a slightly reduced positive attitude when compared to parents in the control group. However, both groups of parents had poor knowledge relating to the transmission and causes of dental caries. Healthcare providers should increase their awareness strategies for parents to be more aware of the ways to improve their children's oral health.

A long-term longitudinal study of gingival recession in dentists: A 15-year follow-up.

OBJECTIVES: To assess the prevalence, distribution pattern, and development/progression of gingival recession in a population of dentists, followed up over an additional 15 years, after an initial and previously published follow-up of 10 years. METHODS: This 25-year longitudinal gingival recession investigation started in 1994 at the Dental School with 60 final-year dental students; among them, 40 were re-examined in 2004, and 27 of those 40 were further examined in 2019 by the same examiner. A questionnaire session provided information on toothbrushing habits at each appointment. RESULTS: In this study, 27 individuals aged 31-44 years (724 teeth) were followed up. The prevalence of gingival recession was 100% after 15 years. A total of 204 and 317 recessions found in 2004 and 2019, respectively, were valid for the longitudinal evaluation. The highest recession incidence was observed in the molars during both examinations (p < 0.0001). The mean recession heights were 1.66 ± 0.87 mm and 1.85 ± 1.08 mm, respectively (p = 0.024). The difference between the means was 0.19 mm after 15 years. The mean probing depth and bleeding on probing at the point of the maximum recession decreased (p < 0.0001). A multiple regression analysis on the tooth level was performed and indicated that the keratinized gingival width was negatively associated with the severity of the buccal recession height. CONCLUSIONS: Fifteen years after the initial follow-up, the mean number of gingival recessions per dentist and the mean recession height increased, while toothbrushing habits remained nearly unchanged.

Impact of toothbrush head configuration and dentifrice abrasivity on non-carious cervical lesions in-vitro.

OBJECTIVE: To investigate the effect of toothbrush head configuration and dentifrice slurry abrasivity on the development of simulated non-carious cervical lesions (NCCLs) in vitro. METHODS: Extracted premolars were randomly allocated into 15 groups (n = 16) generated by the association between toothbrush head configuration (flat-trimmed, rippled, cross-angled/multilevel/rubbers added, cross-angled/multilevel/flex head, feathered) and dentifrice slurry abrasivity (low/medium/high). Teeth were mounted on acrylic blocks and had their roots partially covered with acrylic resin, leaving 2-mm root surfaces exposed. Toothbrushing was performed for 35,000 and 65,000 double-strokes. Specimens were analyzed using non-contact profilometry for dental volume loss (mm3) and lesion morphology. Data was analyzed using ANOVA with pairwise comparisons and Kruskal-Wallis tests. RESULTS: The two-way interaction between toothbrush head configuration and slurry abrasivity was significant (p = 0.02). At 35,000 strokes, the flat-trimmed and cross-angled/multilevel/rubbers added toothbrushes caused the highest loss, when associated to the high-abrasive slurry (p<0.05); whereas cross-angled/multilevel/flex head showed the least loss, when associated to the low-abrasive (p<0.05). At 65,000, more dental loss was observed for all toothbrushes when associated to the high-abrasive slurry, with flat-trimmed causing the highest loss (p < 0.05). Lower dental loss rates were observed for cross-angled/multilevel/flex head associated to the low-abrasive slurry when compared to the other toothbrushes (p < 0.05), except to feathered (p = 0.14) and rippled (p = 0.08). Flat lesions (mean internal angle ± standard-deviation: 146.2°± 16.8) were mainly associated with low-abrasive slurry, while wedge-shaped lesions (85.8°± 18.8) were more frequent with medium- and high-abrasive slurries. CONCLUSION: The development, progression and morphology of simulated NCCLs were modulated by both toothbrush head configuration and dentifrice abrasivity. CLINICAL SIGNIFICANCE: Dental professionals should consider both the type of toothbrush and dentifrice abrasivity in the management plan of patients at risk of developing NCCLs.

The effect of location/site on polished human enamel after mechanical and chemical wear.

OBJECTIVE: To compare profilometry and microhardness of polished occlusal and buccal human enamel following a mechanical and chemical wear regime. METHODS: Enamel from polished human molars were sectioned into buccal and occlusal surfaces and randomly allocated into two groups (n = 10) and then exposed to 0.3 % citric acid at pH 2.7 for 10, 20, 40 and 60 mins each followed by abrasion with non-fluoridated toothpaste for 240 strokes in a reciprocating brushing machine. A white light profilometer with a spot size of 12 um measured mean step-height following each cycle. Microhardness indentations were conducted following the final cycled 60 mins erosion/abrasion using 0.01, 0.02, 0.1, 0.5 and 2.5 kgf indentation load. Statistical disparity were evaluated using a two-way ANOVA and post-hoc Sidak's multiple comparisons tests at α = 0.05. RESULTS: After erosion/abrasion, the mean (SD) step-heights on occlusal and buccal surfaces were not significantly different until 60 mins, when occlusal surfaces exhibited greater step-heights, 32.9 µm (2.8) and 31.1 µm (1.8) and p = 0.02, respectively. Buccal and occlusal microhardness was statistically lower following erosion/abrasion at loads of 0.01 kgf (p = 0.0005) and 0.02 kgf (p = 0.0006) but no significant differences were observed in the microhardness between the surfaces at any loads. CONCLUSION: The occlusal and buccal surfaces were not statistically different for microhardness or step height suggesting the susceptibility to wear is not related to the anatomy and structure of the tooth and is more likely related to other factors such as the environment. CLINICAL SIGNIFICANCE: The study emphasizes that a notable difference in wear between occlusal and buccal enamel surfaces emerges only after prolonged exposure to simultaneous chemical and mechanical stress. This finding necessitates a preventive dental approach that accounts for both the duration of exposure and environmental factors.

Longterm abrasive and erosive effect of whitening toothpaste on dentin surface.

PURPOSE: To evaluate the amount of dentin loss following immersion in or toothbrushing with whitening toothpaste (WT) containing hydrogen peroxide (HP) and citric acid (CA). Additionally, the amount of dentin loss after brushing with a WT alone or in combination with a conventional toothpaste was assessed, and the effects of HP and CA solutions on the dentin surface were investigated. METHODS: Bovine dentin specimens (n= 350) were randomly assigned to seven solutions of various compositions as toothpaste: The specimens assigned to each solution were then further divided into five treatment groups (n=10 each) : Group A = 1-hour immersion in each solution (ES); Group B = 10,000 brushing in ES; Group C = 1-hour immersion in ES + 10,000 brushing in ES; Group D = 1-hour immersion in ES + 10,000 brushing in reference slurry (RS); Group E = 10,000 brushing in ES + 10,000 brushing in RS. The amount and pattern of dentin loss were determined, and the surfaces were observed using noncontact profilometry. RESULTS: The WT (pH 5.0) caused lower dentin loss than RS after a single brushing cycle; however, the extent of dentin loss after 1 hour of immersion in the WT was significantly greater than that in the RS. Among the specimens treated with WT, a significant difference in dentin loss was observed between Group C and Groups D and E (P< 0.05) but not between Groups D and E. The surfaces exposed to CAS1, CAPB, and WT exhibited U-shaped patterns of dentin loss after brushing or immersion, whereas a wedge-shaped pattern was observed in those that underwent brushing with the RS. CLINICAL SIGNIFICANCE: The effects (dentin abrasion) of a whitening toothpaste containing hydrogen peroxide and citric acid when used in combination with a conventional toothpaste were similar to those seen with the continuous use of a conventional toothpaste alone.

Toothbrushing-induced vestibular ulcerations with severe gingival defects.

BACKGROUND: Daily toothbrushing is a routine approach for helping to keep the oral cavity healthy. However, using a toothbrush as an ordinary oral hygiene habit can also lead to adverse events. CASE PRESENTATION: A 75-year-old man was referred by a periodontist for vestibular ulcerations with gingival defects. The patient reported no significant medical or social history, which might be associated with his symptoms. On examination, wide labio-buccal gingival defects, white attached gingiva and linear vestibular ulcerations were observed. With the help of the periodontist, a diagnosis of inappropriate toothbrushing-induced traumatic ulcerations was reasoned via an approach of aetiological elimination. The patient was put on a trial course of topical dexamethasone powder with lincomycin. The resolution of vestibular ulcerations was apparent after two weeks. He reported no similar oral ulcerations during the following nine years. CONCLUSION: To our knowledge, this is the first case reported in the literature of vestibular ulcerations with severe gingival defects caused by inappropriate toothbrushing. The establishment of a correct diagnosis needs a close collaboration between periodontists and oral medicine specialists. Instruction on correct toothbrushing, especially for older people can be beneficial.

Can Frequent Toothbrushing Reduce the Risk of Cirrhosis among Patients with Nonalcoholic Fatty Liver Disease? Hints from a Registry-Based Study.

INTRODUCTION: While poor oral hygiene has been previously associated with an increased risk of nonalcoholic fatty liver disease (NAFLD), its association with hepatic fibrosis remains unclear. Here, we sought to analyze if toothbrushing frequency, an easy-to-assess indicator of oral health habits, would be associated with liver stiffness measurement (LSM) by transient elastography (TE) in patients with an established diagnosis of NAFLD. METHODS: In this registry-based study, LSM was measured in 1,156 patients with NAFLD and analyzed in relation to the self-reported daily frequency of toothbrushing. LSM values ≥12 kPa were considered indicative of cirrhosis. RESULTS: A trend toward a stepwise decrease (cross-sectional p = 0.13) in LSM was found in patients who reported having their teeth brushed more frequently: less than once a day (10.6 ± 8.6 kPa; 13% of the study sample), once a day (9.95 ± 8.40 kPa; 40%), twice a day (9.21 ± 7.63 kPa; 43%), and after every meal (8.91 ± 5.30 kPa; 4%). Patients who brushed their teeth less than once a day had a significantly higher prevalence of LSM values ≥12 kPa (p < 0.05). In multivariable logistic regression analysis, the association of LSM values ≥12 kPa with toothbrushing habits remained statistically significant for less than once a day (odds ratio = 1.69, 95% confidence interval = 1.07-2.66, p = 0.02) with reference to twice a day or after every meal. CONCLUSION: Among patients with NAFLD, there is an independent association between brushing teeth less than once a day and TE-established cirrhosis.

Influence of different ultra-soft toothbrushes on erosive tooth wear.

OBJECTIVE: To investigate the influence of different ultra-soft toothbrushes on the progression of erosive tooth wear (ETW). METHODS: Bovine enamel and dentin specimens (n = 10) were submitted to a 5-day erosive-abrasive cycling model (0.3% citric acid for 5 min, artificial saliva for 60 min, 4x/day). Toothbrushing was carried out 2x/day for 15 s, with the different toothbrushes tested (A- Edel White: flexible handle, tapered bristles; B- Oral-B Gengiva Detox: regular handle, criss-cross tapered bristles; C- Colgate Gengiva Therapy: flexible handle, tapered bristles, high tuft density; d- Oral-B Expert Gengiva Sensi: regular handle, round end bristles, high tuft density; E- Oral-B Indicator Plus: soft brush, round end bristles (control). Surface loss (SL, in µm) was assessed by optical profilometry. The toothbrush characteristics were evaluated by a surgical microscope. Data were statistically analyzed (α=0.05). RESULTS: For enamel, toothbrush C showed the highest SL (means±SD: 9.86 ± 1.28) and it did not differ significantly from A (8.60 ± 0.50), both with flexible handles. The lowest SL was observed for the toothbrush Control E (6.76 ± 0.63), which differed significantly from A and C, but not from the other toothbrushes. For dentin, the highest SL was found for toothbrush D (6.97 ± 1.05) and it did not differ significantly from E (6.23 ± 0.71). The lowest SL was observed for B (4.61 ± 0.71) and C (4.85 + 0.83), without significant differences from A (5.01 ± 1.24). CONCLUSIONS: The ultra-soft toothbrushes had different impacts on the progression of ETW on the dental substrates. On enamel, higher ETW values were observed for the flexible handle toothbrushes, while for dentin, round-end bristles (ultra-soft and soft) caused more ETW. CLINICAL SIGNIFICANCE: Knowledge about the effect of different ultra-soft toothbrushes on ETW can help clinicians to recommend the most suitable types for their patients, bearing in mind that toothbrushes can impact enamel and dentin differently.

Impact of tooth brushing on oral bacteriota and health care-associated infections among ventilated COVID-19 patients: an intervention study.

BACKGROUND: Up to 48% of ventilated coronavirus disease 2019 (COVID-19) patients develop ventilator-associated pneumonia (VAP) during hospitalization in an ICU. Dysbiotic oral microbiota can colonize the lower respiratory tract and lead to VAP. It is recommended to introduce oral care strategies in the ICU to prevent VAP. In this study, we observed the impact of an oral hygienic protocol with tooth brushing on cultivable oral bacteriota, the incidence of HAI and patient safety among mechanically ventilated COVID-19 patients in an ICU setting. METHODS: In this prospective cohort study, we recruited 56 adult COVID-19 patients who qualified for mechanical ventilation. Patients were divided into 2 groups depending on the oral care procedure: standard and extended oral procedures with tooth brushing. Oral bacteriota samples were taken first within 36 h and after 7 days of intubation. Microorganisms were identified by MALDI/TOF mass spectrometry. bacterial health care-associated infection (HAI) cases were retrospectively analyzed by etiology. A PFGE study was performed for Klebsiella pneumoniae to check for clonal spreading of strains from oral bacteriota samples and HAI cases. RESULTS: We observed significant dysbiosis and a decrease in cultivable oral bacteriota diversity, with a high frequency of potentially pathogenic species, including Acinetobacter baumannii and K. pneumoniae. The HAI incidence rate was high (55.2/1000 patient-days), most commonly of K. pneumoniae and A. baumannii etiologies, which correlated with the presence of A. baumannii and K. pneumoniae in the oral samples. Strains isolated from VAP cases were the same as oral isolates in 8 cases. The procedure with tooth brushing led to less frequent identification of A. baumannii in oral samples (55.6% vs. 5.3%, p = 0.001); however, it did not decrease the incidence of HAIs. CONCLUSIONS: Dysbiotic oral bacteriota is an important source of respiratory pathogens. The introduction of tooth brushing in oral hygiene protocols in an ICU setting was effective in decreasing the extent of oral bacteriota dysbiosis; however, it did not reduce the risk of HAIs or mortality. TRIAL REGISTRATION: 1072.6120.333.2020.

Abrasive Enamel and Dentin Wear Resulting from Brushing with Toothpastes with Highly Discrepant Relative Enamel Abrasivity (REA) and Relative Dentin Abrasivity (RDA) Values.

PURPOSE: To investigate the absolute wear caused by toothpastes with highly discrepant REA (Relative Enamel Abrasivity) and RDA (Relative Dentin Abrasivity) values on both enamel and dentin: Candida Peppermint (CP; REA: 1; RDA: 42), Colgate Total Original (CTO; REA: 4; RDA: 100), Signal White System (SWS; REA: 8; RDA: 143), and Candida White Diamond (CWD; REA 244; RDA: 12). MATERIALS AND METHODS: Eighty (80) bovine enamel samples and 80 dentin samples were divided into four groups each (n = 20) and investigated after a 6-h brushing procedure (21,600 cycles, 60 cycles/min, load of 2.5 N) with the four toothpastes. The abrasive enamel and dentin wear were registered using a contact profilometer. The median and interquartile range (IQR) of the abrasive enamel and dentin wear were calculated for each group. Pairwise comparisons were conducted using the Wilcoxon signed-rank exact test, and the p-value was adjusted according to Holm (statistical significance set at 0.05). RESULTS: CWD led to the highest abrasive enamel wear (9.86 µm [5.77]). CTO caused the highest abrasive dentin wear (166.70 µm [69.90]), being statistically significantly higher than the wear for CP (54.20 µm [24.00]) and CWD (17.00 µm [7.80]) (p = 0.00001). The abrasive dentin wear for CWD was statistically significantly lower in comparison to all other groups (p = 0.00001). CONCLUSION: Toothpastes with highly discrepant REA and RDA values presented statistically significantly different absolute wear on enamel and dentin. REA and RDA values should both be declared for every toothpaste.

Effect of brushing force on the abrasive dentin wear using slurries with different abrasivity values.

OBJECTIVE: The aim of this study was to investigate the resulting abrasive dentin wear using abrasive slurries with different RDA values and applying increasing brushing forces. METHODS: Forty-five bovine incisors were randomly allocated in three groups (A, B, C, n = 15). One hundred and eighty dentin samples were prepared from these incisors and allocated to twelve groups (A1-A4, B1-B4, C1-C4; n = 15). The groups were subjected to a brushing cycle (120 strokes/min, 25 min) as follows: groups A1 to A4 with an abrasive slurry (RDA = 71) applying increasing brushing forces (1, 2, 3 and 4 N). Groups B1 to B4 were brushed using an abrasive slurry (RDA = 85) and C1 to C4 (RDA = 133) applying the same above-mentioned brushing forces. Abrasive dentin wear was recorded using a stylus profilometer and compared amongst the groups using robust models. Pairwise comparisons in each model were tested and corrected after Tukey's method (α = 0.05). RESULTS: Applying 1-N brushing force resulted in the same amount of abrasive dentin wear in all groups regardless of the abrasivity of the used slurry. Increasing the brushing force to 2 N resulted in statistically significantly higher abrasive wear in all groups. This increase in abrasive wear was much higher when the slurry with high abrasivity was used (RDA = 133) compared with the lower abrasive slurry (RDA = 71). CONCLUSION: The abrasivity of the used slurry does not add to the resulting abrasive wear when the brushing force is kept at 1 N. It seems better to advise and help the patients (showing signs of non-carious cervical lesions) calibrating their brushing force to 1 N, than only to advise them to use toothpastes with lower abrasivities.

The in vitro Effect of Dentifrices With Activated Charcoal on Eroded Teeth.

AIM: The objective of this research was to compare the abrasive potential of dentifrices containing activated charcoal with those of a conventional dentifrice on the development of erosive tooth wear (ETW) in vitro. METHODS: Enamel and dentin samples were divided into toothpastes (n = 12): group (G)1-Colgate Triple Action (1450 ppm F) (positive control); G2-Colgate Natural Extracts (1450 ppm F); G3-Colgate Luminous White Activated Carbon (1450 ppm F); G4-Oral-B Whitening Therapy Charcoal (1100 ppm F); G5-Oral-B 3D White Mineral Clean (1100 ppm F); G6-Curaprox Black Is White (950 ppm F); and G7-erosion only (no abrasion, negative control). All samples were submitted to erosive pH cycles and G1 to G6 to abrasive challenges (15 seconds) using toothpastes' slurries plus 45 seconds of treatment for 7 days. The final profile was overlaid to the baseline one for the ETW calculation (µm). The data were subjected to analysis of variance/Tukey or Kruskal-Wallis/Dunn tests (P < .05). RESULTS: Oral-B 3D White (13.0 ± 1.0, 9.37 [1.36] µm), Oral-B Whitening Therapy (15.1 ± 1.2, 8.58 [1.71] µm), and Colgate Luminous White (13.6 ± 1.0, 7.46 [0.94] µm) toothpastes promoted the greatest enamel and dentin wear. On the other hand, Colgate Triple Action (12.2 ± 1.2, 5.30 [1.26] µm), Colgate Natural Extracts (10.8 ± 1.1, 4.16 [1.11] µm), and Curaprox Black Is White (11.5 ± 1.5, 4.06 [0.92] µm) toothpastes promoted lower wear values, similar to erosion only (4.16 [0.94] µm) in the case of dentin but not enamel (7.1 ± 0.8 µm). CONCLUSIONS: Toothpastes containing charcoal combined with pyrophosphate may have a high abrasive effect on eroded tooth surfaces. Many patients influenced by digital marketing use toothpastes containing activated charcoal with the aim of bleaching their teeth. However, care should be taken when using these products, as they may have a high abrasive effect.

Activated Charcoal Dental Products: Evidence of Effectiveness Is Lacking.

With society trending toward the avoidance of artificial components, so-called "natural" products have been gaining space and people's attention in recent years. Activated charcoal-based dental products are a prominent example of this movement because of their promise of removal of extrinsic stains or whitening of teeth by a natural means. Such products have gained popularity among patients, and companies have explored this market, launching charcoal-based and activated charcoal-based dentifrices, mouthrinses, toothbrushes, and whitening products that can be easily found at nearby stores and on the internet.1.

Simulation of Non-Carious Cervical Lesions by Computational Toothbrush Model: A Novel Three-Dimensional Discrete Element Method.

Non-carious cervical lesions (NCCLs) are saucer-shaped abrasions of a tooth. NCCLs can form due to various etiologies, including toothbrushing wear, acid erosion, and mechanical stress. Owing to this complex interplay, the mechanism of NCCLs in tooth abrasion has not been established. This study aims to develop a numerical method using a computational toothbrush to simulate NCCLs. The forces acting on the teeth and the amount of abrasion generated were evaluated. The discrete element method using in-house code, connected particle model, and Archard wear model were applied for brushing. In the toothbrush model, 42 acrylic tufts were fixed into a toothbrush head. The teeth models with enamel properties comprised four flat plates and two grooves to simulate the anterior teeth and NCCLs. The brushing speed and depth for one cycle were established as simulation parameters. The force applied within the ununiform plane was concentrated on several bristles as the toothbrush passed through the interproximal space. The brushing force (depth) had a greater effect on tooth abrasion than the brushing speed. Toothbrushing abrasion was mainly concentrated in the interproximal space. Therefore, forceful tooth brushing can cause NCCLs from the interproximal space to the cervical area of the tooth.

Diamond particles in toothpastes: in-vitro effect on the abrasive enamel wear.

BACKGROUND: Diamond particles have recently been used as abrasives in toothpastes, which raises questions about its abrasive behaviour towards enamel. This study was carried out to investigate the abrasive enamel wear caused by three diamond-loaded toothpastes (Candida White Diamond: CWD, Swiss Smile Diamond Glow: SSDG, Emoform F Diamond: EFD) and to compare it with a traditional toothpaste with silica abrasive (Colgate Total Original CTO). METHODS: Eighty bovine enamel samples were divided into four groups (n = 20) and brushed for 21,600 cycles (60 cycles/min) for 6 h at 2.5-N brushing force. The abrasive enamel wear was recorded with a contact profilometer. The median and interquartile range (IQR) of the abrasive enamel wear was calculated in each group. Pairwise comparisons were conducted using Wilcoxon signed rank exact test and the p value was adjusted according to Holm. Significance level was set at 0.05. RESULTS: Diamond-loaded toothpastes caused statistically significantly higher abrasive wear than the traditional toothpaste (p < 0.0001). SSDG caused statistically significantly higher enamel wear (19.0 µm (11.2)) than CWD (8.4 µm (4.6)) and EFD (7.3 µm (3.9)) (p < 0.0001). CONCLUSIONS: Diamond-loaded toothpastes cause higher enamel wear than toothpastes with traditional abrasives and also exhibit different abrasivity behaviour compared to each other.

Accidentally Swallowing a Toothbrush in a Patient during a Vomiting Attempt: Literature Review and Case Report.

Swallowing a whole toothbrush is a rare event. As of today, no case described has documented that the foreign body has passed through the entire gastrointestinal tract and has been spontaneously eliminated. Places where it is most frequently retained have been described. Only in one single case described did the foreign body reach the colon. We describe the main injuries caused by this foreign body, and the most common correct therapeutic approach for solving the problem. The third case in the literature is presented, with diagnosis and treatment of a woman who, in an attempt to induce vomiting, swallowed a toothbrush which became lodged in her stomach. The patient, at the time of the examination, only showed abdominal pain and anxiety.

Effect of tapered-end and round-end bristles on the abrasive dentine wear applying increasing brushing forces.

OBJECTIVE: To investigate the effect of toothbrush bristles end configuration on the abrasive dentine wear at different brushing forces. MATERIAL AND METHODS: One hundred and sixty bovine dentine samples were randomized into eight groups (n = 20). Groups (1 to 4) were brushed with tapered-end bristles at 1-, 2-, 3-, and 4-N brushing forces, respectively. Groups (5 to 8) were brushed with round-end bristles with the same brushing forces. The brushing sequence was carried out using an abrasive slurry (RDA = 121) for 25 min. Profiles were recorded using a contact profilometer. Mean and standard deviation were calculated for the abrasive dentine wear in each group. Two-way ANOVA was used to locate any significance. The significance values were corrected after Tukey (α = 0.05). RESULTS: Brushing with tapered-end bristles resulted in statistically significantly less abrasive dentine wear than round-end bristles regardless of the applied brushing force (1 N: 4.4 ± 1.5 vs. 7.7 ± 2.0 µm; 2 N: 7.7 ± 2.1 vs. 12.2 ± 2.7 µm; 3 N: 11.3 ± 2.6 vs. 19.4 ± 3.7 µm; 4 N: 11.2 ± 2.1 vs. 25.3 ± 4.8 µm). The interaction between bristle configuration and brushing force was statistically significantly (p < 0.001). CONCLUSION: Tapered-end toothbrushes might be a safer choice for patients, especially when showing signs of non-carious cervical lesion. However, other toothbrush properties should also be considered.

Effect of the toothbrush tuft arrangement and bristle stiffness on the abrasive dentin wear.

The geometrical properties of toothbrushes play a role in developing abrasive tooth wear and non-carious cervical lesions. This study investigated the interplay between the toothbrush tuft arrangement (crossed vs. parallel) and bristle stiffness (soft vs. medium) on the abrasive dentin wear using three slurries with different levels of abrasivity (RDA: 67, 121 and 174). Twelve groups of bovine dentin samples (n = 20) were brushed with a combination of the aforementioned variables. Abrasive dentin wear was recorded with a profilometer and the resulting abrasive wear of each group was calculated and compared with each other using two-way ANOVA and pairwise tests. Toothbrushes with parallel tuft arrangement caused statistically significantly higher dentin wear compared to crossed tuft arrangement, regardless of the abrasivity level of the used slurry and the bristle stiffness. Soft crossed tuft toothbrushes caused statistically significantly higher abrasive dentin wear than medium crossed tuft toothbrushes, while soft and medium parallel tuft toothbrushes caused the same amounts of dentin wear, regardless of the RDA value of the used slurry. These results could be helpful for dentists and dental hygienists when advising patients. Crossed tuft toothbrushes could be a less-abrasive choice in comparison to parallel tuft toothbrushes.