Photocatalytic processes assisted by artificial solar light for soil washing effluent treatment.

Contaminated soil has become a growing issue in recent years. The most common technique used to remove contaminants (such as metals) from the soil is the soil washing process. However, this process produces a final effluent containing chelating agents (i.e., ethylenediaminedisuccinic acid, also known as EDDS) and extracted metals (i.e., Cu, Fe, and Zn) at concentrations higher than discharge limits allowed by the Italian and Brazilian environmental law. Therefore, it is necessary to develop further treatments before its proper disposal or reuse. In the present study, soil washing tests were carried out through two sequential paths. Moreover, different artificial sunlight-driven photocatalytic treatments were used to remove Cu, Zn, Fe, and EDDS from soil washing effluents. Metal concentrations after the additional treatment were within the Brazilian and Italian regulatory limits for discharging in public sewers. The combined TiO2-photocatalytic processes applied were enough to decontaminate the effluents, allowing their reuse in soil washing treatment. Ecotoxicological assessment using different living organisms was carried out to assess the impact of the proposed two-step photocatalytic process on the effluent ecotoxicity. Graphical Abstract ᅟ.

Electromembrane extraction of diamine plastic restricted substances in soft drinks followed by capillary electrophoresis with contactless conductivity detection.

Ethane-1,2-diamine (EA) and hexane-1,6-diamine (HA) are two important plastic restricted substances commonly existing in food contact materials. A capillary electrophoresis with capacitively coupled contactless conductivity detection (CE-C4D) method has been developed for direct determination of above analytes, and the detection sensitivity has been significantly improved based on electromembrane extraction (EME). Under the optimum conditions, EA and HA could be well separated from their aliphatic diamine homologs as well as the common inorganic cations within 25min. The limits of detection could reach sub-ng/mL level, and good linearity (r>0.998) between peak area and analyte concentration could be obtained at three orders of magnitude. This EME/CE-C4D method provided a novel application for determining these plastic restricted substances in different bottled soft drinks, providing an alternative for the sensitive analyses of diamine substances.

Cytotoxic deoxybenzoins and diphenylethylenes from Arundina graminifolia.

Eight new C-4-alkylated deoxybenzoins (1-8), three new diphenylethylenes (9-11), and five known diphenylethylenes were isolated from Arundina graminifolia. The structures of 1-11 were elucidated by spectroscopic methods including extensive 1D and 2D NMR techniques. Compounds 9-11 are the first naturally occurring diphenylethylenes possessing a hydroxyethyl unit. Compounds 1-11 were evaluated for cytotoxicity against five human tumor cell lines. Compounds 4, 5, and 9-11 showed significant cytotoxicity against five cancer cell lines, with IC50 values ranging from 1.8 to 8.7 µM.

Hydrophilic interaction liquid chromatography in the separation of a moderately lipophilic drug from its highly polar metabolites--the cardioprotectant dexrazoxane as a model case.

This paper presents a systematic study of the retention behavior of a model bisdioxopiperazine drug, dexrazoxane (DEX) and its three polar metabolites (two single open-ring intermediates-B and C and an EDTA-like active compound ADR-925) on different stationary phases intended for hydrophilic interaction liquid chromatography (HILIC). The main aim was to estimate advantages and limitations of HILIC in the simultaneous analysis of a moderately lipophilic parent drug and its highly polar metabolites, including positional isomers, under MS compatible conditions. The study involved two bare silica columns (Ascentic Express HILIC, Atlantis HILIC) and two stationary phases with distinct zwitterionic properties (Obelisc N and ZIC HILIC). The chromatographic conditions (mobile phase strength and pH, column temperature) were systematically modified to assess their impact on retention and separation of the studied compounds. It was found that the bare silica phases were unable to separate the positional isomers (intermediates B and C), whereas both columns with zwitterionic properties (Obelisc N and ZIC HILIC) were able to separate these structurally very similar compounds. However, only ZIC HILIC phase allowed appropriate separation of DEX and all its metabolites to a base line within a single run. A mobile phase composed of a mixture of ammonium formate (0.5 mM) and acetonitrile (25:75, v/v) was suggested as optimal for the simultaneous analysis of DEX and its metabolites on ZIC HILIC. Thereafter, HILIC-LC-MS analysis of DEX and all its metabolites was performed for the first time to obtain basic data about the applicability of the suggested chromatographic conditions. Hence, this study demonstrates that HILIC could be a viable solution for the challenging analysis of moderately polar parent drug along with its highly polar metabolites including the ability to separate structurally very similar compounds, such as positional isomers.

Formulation of 68Ga BAPEN kit for myocardial positron emission tomography imaging and biodistribution study.

INTRODUCTION: Tris(4,6-dimethoxysalicylaldimine)-N,N'-bis(3-aminopropyl)-N,N'-ethylenediamine (BAPEN), a tris(salicylaldimine) derivative, is a heart positron emission tomography (PET) agent when labeled with (68)Ga. However, its labeling requires complicated and time-consuming procedures. In this study, the authors formulated a new BAPEN kit for convenient (68)Ga labeling. METHODS: BAPEN (0.25 mg) kits were prepared by dispensing its solution in 1 M sodium acetate buffer (pH 5.5) into sterile vials and lyophilization. The prepared kits were labeled with generator-eluted (68)Ga in 0.1 N HCl. Stability in human serum was tested. Expiration date was determined by accelerated testing according to US Food and Drug Administration guidelines. A Biodistribution study was performed in normal mice after injection via tail vein. RESULTS: The prepared kits achieved radiolabeling efficiencies in excess of 95% and showed a shelf-life of 98 days at 25 degrees C and 64.3 months at 4 degrees C. (68)Ga-BAPEN was found to be stable in human serum at 37 degrees C for at least 1 h. Furthermore, a biodistribution study revealed high heart uptake (10.8% ID/g, 1 h). CONCLUSIONS: The authors developed a BAPEN kit for convenient labeling with (68)Ga. The (68)Ga-BAPEN showed high stability and excellent biodistribution results in normal mice, which is required for myocardial PET imaging.

In-tube solid-phase microextraction and liquid chromatography using a monolithic column for the selective determination of residual ethylenediamine in industrial cationic polymers.

The selective determination of the diamine ethylenediamine (EDA) in the presence of a higher amount of residual dimethylamine in cationic polymers has been developed. The strategy uses both a solution derivatization with a selective agent of primary amines such as o-phthaldialdehyde-N-acetyl-L-cysteine (OPA-NAC) and an in-tube solid-phase microextraction (IT-SPME) coupled to liquid chromatography (LC). A 70 cm long, 0.32 mm internal diameter, and 3 microm thick commercially available capillary column coated with 95% polydimethylsiloxane and 5% polydiphenylsiloxane was employed to replace the injection loop of a Rheodyne injection valve. A volume of 1 mL of derivatized sample was passed through the capillary, and 100 microL of water was later used for cleaning and filling the capillary. After, the injection was effected and the desorption of the derivative from the capillary was carried out in the dynamic mode using the mobile phase. Chromatographic separation was performed in less than 2 min using a monolithic silica column Onyx (100 mm x 3.0 mm i.d.) under isocratic conditions. The effect of several parameters affecting derivatization and IT-SPME was investigated. The quantification of EDA was realized over the range of 0.07-2 microg/mL with adequate linearity, accuracy, and reproducibility, and the limit of detection was 20 ng/mL. The method is rapid and low in cost, and sample handling and organic solvent consumption have been minimized. Its application to polymeric cationic surfactants used in water treatment allowed the selective quantification of residual EDA at low microgram per milliliter levels of concentration without off-line preconcentration.

Evaluation of immobilized metal-ion affinity chromatography for the fractionation of natural Cu complexing ligands.

An immobilized metal-ion affinity chromatography (IMAC) method has been developed and validated for the separation of copper complexing ligands from soil solution. We first investigated the retention behavior of simple model ligands on the IMAC column and found that the ability to form ternary complexes of the structure Cu-IDA-ligand was the dominant factor influencing ligand retention on the IMAC column. The logK value of the Cu-complex was found to have only a minor influence on the retention. Legends containing only carboxylic acid functional groups were not retained on the column. To optimize reproducibility and quantitative recovery of copper ligands from soil solution, different composition and pH values of eluting buffer were tested. Soil solution chromatograms exhibited one non-retained fraction and two retained fractions. The elution times of the retained fractions were characteristic of peptides and proteins (first peak) and for compounds containing aromatic amines (second peak). The results show that IMAC is an effective tool for the fractionation of copper complexing ligands that are capable of forming ternary complexes.

Organosilica copolymers for the adsorption and separation of multiple pollutants.

Benzene, diethylbenzene, and ethylenediamine-bridged bistrialkoxy precursors were used in the synthesis of multifunctional PMO copolymers for the adsorption of phenols and metal ions. Polyoxyethylene(10) stearyl ether (Brij 76) was used as the structure director with the surfactant template approach in the synthesis. The resulting PMO copolymers with two or more bridging groups have been characterized by nitrogen gas adsorption, powder X-ray diffraction, and 13C and 29Si solid-state NMR. These organosilicas exhibit large surface areas, narrow pore size distributions, large total pore volumes, and pore ordering consistent with well ordered, hexagonally packed p6mm structures. Minimal competitive effects were observed on the adsorption of p-chlorophenol to the copolymers in the presence of copper ions in solution. Similarly, the presence of p-chlorophenol in solution or adsorbed onto the copolymers did not interfere with copper adsorption. Replacement of a small portion of the benzene bridge in the 90:10 BENZ:EDA copolymer with diethylbenzene produced a copolymer 2.5-fold more efficient for p-chlorophenol adsorption. ICP analysis revealed that greater than 98% of adsorbed copper was removed during extraction with HCl, and this extraction process can be repeated with no difference in copper adsorption after regeneration.

Physical stability of ethyl diatrizoate nanocrystalline suspension in steam sterilization.

PURPOSE: To study the effects of formulation variables on the physical stability of a submicron crystal (nanocrystal) suspension under steam sterilization conditions. METHODS: Suspensions of ethyl diatrizoate nanocrystals were prepared by wet milling in the presence of the surfactant poloxamine 908. Particle size distribution and zeta potential were measured by photon correlation spectroscopy. RESULTS: On heating, the mean particle size of the nanocrystal suspension remained essentially unchanged up to 110 degrees C, the cloud point of the stabilizing surfactant, but increased significantly above that temperature. The increase in particle size was a result of particle aggregation rather than crystal growth. Adding a cloud point booster to the suspension significantly minimized the particle aggregation at high temperatures. The purity of poloxamine 908 and the tonicity agent and buffer salt used also affected the heat stability of the suspension, the latter agents apparently through altering the surfactant cloud point. CONCLUSIONS: The aggregation of the ethyl diatrizoate nanocrystalline suspension under steam sterilization conditions was a result of phase separation of the stabilizing surfactant at its cloud point. When formulated with a cloud point booster to prevent the phase-separation, the suspension maintained its physical stability under steam sterilization without any significant change in particle size distribution.

Technetium-99m complexes of polydentate amine-pyrrole and amine-thiophene ligands.

Novel polydentate amine-pyrrole and amine-thiophene ligands were synthesized and characterized by 1H and 13C NMR spectroscopy. Radiochemical studies with 99mTc were carried out at 0.1-100 microM of technetium. Complexation yields were estimated from thin layer chromatography (TLC), paper electrophoresis, and solvent extraction studies. The 99mTc complexes formed were found to be neutral and lipophilic. Complexes with the corresponding imine-ligands were formed in lower yields. Biodistribution studies of the 99mTc complexes of these ligands showed no significant uptake in brain or heart, and the clearance was mainly through the hepatobiliary system.

Quantitation of the dexrazoxane hydrolysis product ADR-925 by fluorescence detection of its terbium(III) complex after high-performance liquid chromatographic separation.

An HPLC fluorescence detection method was developed to quantitate the complexing agent ADR-925 (II). Compound II is the metal-ion-binding rings-opened hydrolysis product of the doxorubicin cardioprotective drug dexrazoxane (I). II formed a strong complex with the fluorescent metal-ion terbium(III) and this complex could be chromatographed by HPLC and detected by its fluorescence, with excitation and emission wavelengths of 200 and 544 nm, respectively. The terbium(III)-II complex was separated isocratically on a C18 reversed-phase column with an eluent consisting of 50% methanol and 50% 4 mM aqueous solution of the ion-pairing reagent 1-heptanesulfonate. The lower limit of detection of II, quantitated as its fluorescent terbium(III) complex, was estimated to be 25 pmol, which was some twenty times lower than with UV-Vis absorbance detection. The fluorescent detection method was used to follow the hydrolysis of I to II in buffer and in blood plasma.

Purification of residualizing glycoconjugate labels for protein by reversed-phase high-pressure liquid chromatography.

Residualizing labels are radioactive or fluorescent tracers used for identifying the tissue and cellular sites in which circulating proteins are catabolized in the body. When attached to protein the labels do not affect normal mechanisms of protein catabolism, but remain at the cellular site of protein uptake, after the carrier protein itself is degraded to diffusible catabolites. Until recently these labels consisted of biologically indigestible carbohydrates attached to a radioactive reporter molecule. In this report we describe the synthesis and purification of a new fluorescent residualizing label, N,N-dilactitol-N'-fluoresceinyl-ethylenediamine. The label is prepared by first derivatizing ethylenediamine 1:1 with fluorescein isothiocyanate and then coupling lactose to the remaining primary amino group by reductive amination. A rapid one step purification of this and other glycoconjugate labels by reversed-phase high-pressure liquid chromatography is described.

Purification of quadrol for microsequencing in the spinning-cup sequenator.

Treatment of Quadrol buffer with isothiocyanatophenylthiocarbamylaminoethylaminopropyl glass (DITC glass) substantially reduces the impurities observed when this buffer is used with the spinning cup sequenator. Use of DITC glass-treated Quadrol buffer permits identification of PTH-amino acids from protein degradations down to 100 pmol.