Development and validation of LC-MS method for the determination of heptaethylene glycol monomethyl ether in benzonatate bulk drugs.

A simple and isocratic reverse-phase liquid chromatography with mass spectrometric method has been developed and validated for the determination of heptaethylene glycol monomethyl ether in benzonatate drug substance. Benzonatate is an oral antitussive drug used to relieve and suppress cough in patients older than 10 years. The presence of residual heptaethylene glycol monomethyl ether in the benzonatate drug substance affects the safety, strength, purity and quality of the drug substance. The subject compound separation was achieved using 0.1% formic acid and acetonitrile (50:50 v/v) at a flow rate of 0.3 ml/min. The Suplex PKB-100 250 × 4.6 mm, 5 µm LC column was used for a better peak shape. Detection was carried out at an m/z value of 341. The linearity curve showed a correlation of coefficient of >0.999. The precision and intermediate precision (RSD) were <7.30. The accuracy values were >90% for all levels. The developed method was validated as per International Conference on Harmonization guidelines and found to be a novel, specific and sensitive analytical method for determination of components of interest.

Simultaneous quantification of ethylene glycol and diethylene glycol in beer by gas chromatography coupled to mass spectrometry.

An analytical method for the simultaneous determination of ethylene glycol and diethylene glycol in beer was developed and validated according to current legislation. This method includes the application of sample dilution with ethanol followed by quantification using gas chromatography coupled to mass spectrometry. All figures of merit were within the limits established by regulation. The recoveries of the analytes, expressed as mean recovery, were between 91.9% and 108.9%. Precision, in terms of repeatability and intermediate precision, was established (relative standard deviations were lower than or equal to 10%). The limits of detection (10.0 and 5.0 mg.L-1 for ethylene glycol and diethylene glycol, respectively) and quantification (15.0 mg.L-1 for ethylene glycol and diethylene glycol) obtained were appropriate. Finally, the present method was applied for determination of ethylene glycol and diethylene glycol in 701 beer samples (from 67 different brands and 128 different labels), proving to be reliable.

An evaluation of glistening and stability of intraocular lens material manufactured by different methods.

PURPOSE: To evaluate glistening and long-term stability of five commercially available intraocular lenses. METHODS: This experimental study evaluated the SN60WF (Alcon), XY1 (Hoya), NS-60YG (NIDEK), ZCB00V (Johnson & Johnson Vision) and AN6KA (Kowa) intraocular lenses. To generate glistenings, intraocular lenses were immersed in physiological saline at 50°C for 2 h, then left in situ at 35°C and removed at regular intervals over 24 h. Stability of the intraocular lens material was assessed by immersing intraocular lenses into vials of purified water placed at 100°C for 115 days, which simulated 20-year ageing. Gas chromatography-mass spectrometry was used to detect leached compounds. RESULTS: Almost no glistenings were observed for the AN6KA. Glistenings were observed in the remaining intraocular lenses after 3 h. The number of glistenings gradually disappeared by 6 h for all intraocular lenses except SN60WF (12 h). Only the NS-60YG and ZCB00V intraocular lenses had no changes in weight or dimensions. Gas chromatography-mass spectrometry detected phenethyl alcohol in XY1 and SN60WF, 2-phenoxyethanol in AN6K and no compounds in the remaining intraocular lenses. A peak shift due to the carbonyl group between 1600 and 1700 cm-1 was detected for the SN60WF and AN6K intraocular lenses only. CONCLUSION: SN60WF had the most numerous glistenings that resolved over a longer duration. The long-term stability test confirmed elution of the intraocular lens material-derived compounds and signs of degradation for the XY1, SN60WF and AN6K intraocular lenses. NS-60YG and ZCB00V showed no signs of deterioration due to ageing. Differing manufacturing methods likely play a role in the stability of intraocular lenses.

FT-IR Spectroscopy for the Detection of Diethylene Glycol (DEG) Contaminant in Glycerin-Based Pharmaceutical Products and Food Supplements.

Identification and determination of diethylene glycol (DEG) in glycerin-based products was successfully achieved using FT-IR spectroscopy. Studied samples included 0.5% to 20% by mass DEGspiked into cough syrup, two paracetamol syrup formulations, and two food supplements. The characteristic DEGwavenumbers at 881 cm-1 and 1083 cm-1 were used for its quantitative determination in the studied samples. A very good accuracy in determining the DEG fraction was achieved with a mean error% of ±2.02% to ±7.69% upon using the corrected absorbance at 881 cm-1. The corrected absorbance at 1083 cm-1 band was used in the case of paracetamol formulations and resulted in a mean error% ranging from ±2.50% to ±10.28%. The values of limit of detection of the current method ranged from 0.051% to 0.068% DEG for all studied samples.

Tandem Ion Mobility Spectrometry for the Detection of Traces of Explosives in Cargo at Concentrations of Parts Per Quadrillion.

A tandem ion mobility spectrometer (IMS2) built from two differential mobility analyzers (DMAs) is coupled at ambient pressure with a thermal fragmenter placed in between, such that the precursor ions selected in the first DMA are thermally decomposed at ambient pressure in the fragmenter and the product ions generated are filtered in the second DMA. A thermal desorber and a multicapillary gas chromatography (GC) column are coupled to a secondary electrospray (SESI) ion source, so the adsorption sampling filters are thermally desorbed and the liberated vapors are separated in the GC column, prior to their ionization and mobility/mobility classification. The new fragmenter allows the fragmentation of the five explosives studied: RDX, PETN, NG, EGDN, and TNT. The background of the analyzer is evaluated for the five explosives using air samples of 500 L volume. An atmospheric background of only 2.5 pg (5 ppq) is found for TNT, being somewhat higher for the rest of explosives studied. The architecture GC-IMS2 is compared with GC-IMS obtaining a 100-fold increase of sensitivity in the first configuration, confirming the high selectivity provided by the fragmentation cell and the second IMS stage for the product ion mobility analysis. The analyzer is tested also with real explosives hidden in cargo pallets achieving successful detection of four (EGDN, NG, TNT, and PETN) out of five explosives.

High total dissolved solids in shale gas wastewater inhibit biodegradation of alkyl and nonylphenol ethoxylate surfactants.

Hydraulic fracturing fluids are injected into unconventional oil and gas systems to stimulate hydrocarbon production, returning to the surface in flowback and produced waters containing a complex mixture of xenobiotic additives and geogenic compounds. Nonionic polyethoxylates are commonly added surfactants that act as weatherizers, emulsifiers, wetting agents, and corrosion inhibitors in hydraulic fracturing fluid formulations. Understanding the biodegradability of these ubiquitous additives is critical for produced water pre-treatment prior to reuse and for improving treatment trains for external beneficial reuse. The objective of this study was to determine the effect of produced water total dissolved solids (TDS) from an unconventional natural gas well on the aerobic biodegradation of alkyl ethoxylate and nonylphenol ethoxylate surfactants. Changes in surfactant concentrations, speciation and metabolites, as well as microbial community composition and activity were quantified over a 75-day aerobic incubation period. Alkyl ethoxylates (AEOs) were degraded faster than nonylphenol ethoxylates (NPEOs), and both compound classes and bulk organic carbon biodegraded slower in TDS treatments (10 g L-1, 40 g L-1) as compared to controls. Short-chain ethoxylates were more rapidly biodegraded than longer-chain ethoxylates, and changes in the relative abundance of metabolites including acetone, alcohols, and carboxylate and aldehyde intermediates of alkyl units indicated metabolic pathways may shift in the presence of higher produced water TDS. Our key finding that polyethoxylated alcohol surfactant additives are less labile at high TDS has important implications for produced water management, as these fluids are increasingly recycled for beneficial reuse in hydraulic fracturing fluids and other purposes.

Quantification of [18F]florbetapir: A test-retest tracer kinetic modelling study.

Accumulation of amyloid beta can be visualized using [18F]florbetapir positron emission tomography. The aim of this study was to identify the optimal model for quantifying [18F]florbetapir uptake and to assess test-retest reliability of corresponding outcome measures. Eight Alzheimer's disease patients (age: 67 ± 6 years, Mini-Mental State Examination (MMSE): 23 ± 3) and eight controls (age: 63 ± 4 years, MMSE: 30 ± 0) were included. Ninety-minute dynamic positron emission tomography scans, together with arterial blood sampling, were acquired immediately following a bolus injection of 294 ± 32 MBq [18F]florbetapir. Several plasma input models and the simplified reference tissue model (SRTM) were evaluated. The Akaike information criterion was used to identify the preferred kinetic model. Compared to controls, Alzheimer's disease patients had lower MMSE scores and evidence for cortical Aß pathology. A reversible two-tissue compartment model with fitted blood volume fraction (2T4k_VB) was the preferred model for describing [18F]florbetapir kinetics. SRTM-derived non-displaceable binding potential (BPND) correlated well (r2 = 0.83, slope = 0.86) with plasma input-derived distribution volume ratio. Test-retest reliability for plasma input-derived distribution volume ratio, SRTM-derived BPND and SUVr(50-70) were r = 0.88, r = 0.91 and r = 0.86, respectively. In vivo kinetics of [18F]florbetapir could best be described by a reversible two-tissue compartmental model and [18F]florbetapir BPND can be reliably estimated using an SRTM.

Development of a ssDNA aptamer system with reduced graphene oxide (rGO) to detect nonylphenol ethoxylate in domestic detergent.

Endocrine-disrupting chemicals are a major public health problem throughout the world. In the human body, these compounds functionalize the same as sexual hormones, inducing precocious puberty, gynecomastia, etc. To help prevent this occurrence, a simple detection system is needed. In this study, a nonylphenol ethoxylate (NPE)-specific aptamer was selected by reduced graphene oxide-systematic evolution of ligands by exponential enrichment. A random ssDNA library was incubated with rGO for adsorption, followed by elution with the target molecule. As a result of screening, a DNA aptamer was found that specifically bounds to the target with high binding affinity (Kd  = 100.9 ± 13.2 nM) and had a low limit of detection (LOD = 696 pM). Furthermore, this NPE-binding aptamer bounds selectively to the target. Characterization of the aptamer was confirmed by measuring the fluorescence signal recovery from rGO. In addition, detection of NPE was performed with several water samples, and the detection accuracy was 100 ± 10%. From these results, we expect that this aptamer could be applied to an on-site detection system for NPE in industrial sites or domestic fields.

Development and comparative analysis of single-drop and solid-phase microextraction techniques in the residual determination of 2-phenoxyethanol in fish.

Solid-phase microextraction (SPME) and single-drop microextraction (SDME) in headspace mode, were used in the residual determination of the anesthetic 2-phenoxyethanol in fish fillets, to ensure food safety. For the optimization of the methodologies the experimental central composite design (CCD) was used, resulting in accurate evaluations with less amount of analysis. The developed methodologies presented good precision in the evaluated range, o limits of detection (LD) and quantification (LQ) for SDME were 0.2 and 0.62 µg mL-1 and for SPME were 0.18 and 0.56 µg mL-1, respectively. In the analyzed samples the determined elimination time of post-anesthesia 2-phenoxyethanol was 12 h for the SDME and 24 h for the SPME, at the anesthesia concentrations evaluated (450-1050 µg mL-1). The two techniques presented viability of application for the residual determination of 2-phenoxyethanol in fish, SPME being more sensitive and automated and SDME with lower operation cost.

Analysis of Catecholamine and Their Metabolites in Mice Brain by Liquid Chromatography-Mass Spectrometry Using Sulfonated Mixed-mode Copolymer Column.

In this study, a simultaneous assay for catecholamines and their metabolites in the brain was established using liquid chromatography-mass spectrometry (LC-MS). To achieve complete separation, a cation-exchange/reversed-phase mixed-mode copolymer resin column containing 0.81 wt% sulfo groups was used for the simultaneous LC-MS assay. The analyzed catecholamines were dopamine (DA), norepinephrine (NE), and epinephrine (E), while the metabolites lacking amino groups were 3,4-dihydroxyphenylacetic acid (DOPAC), homovanillic acid (HVA), and 3-methoxy-4-hydroxyphenylglycol (MHPG). The metabolites were separated and detected using LC-MS, on columns with and without sulfo groups. However, we could not achieve adequate separation of catecholamines on both columns using a gradient elution of 0 - 50 (v/v)% methanol containing 0.1 (v/v)% formic acid (FA). When volatile ion-pairing reagents were added to the mobile phase, they improved the retention and detection of catecholamines on the sulfonated mixed-mode column. Under optimized elution conditions, which involved a linear gradient elution of water containing 0.1 (v/v)% FA to 50 (v/v)% acetonitrile in 50 mM ammonium formate at 40°C and a 0.20 mL/min rate, all six target molecules were simultaneously detected within 25 min, when using negative mode LC-MS on a sulfonated mixed-mode column. The limits of detection (LODs) for DA, NE, E, DOPCA, HVA, and MHPG were determined to be 20.7, 12.6, 74.6, 1110, 18.7, and 3196 nM, respectively. Moreover, the established LC-MS assay allowed the detection of endogenous DA, NE, and HVA, in normal mouse brain samples at concentrations higher than 20, 9, and 4 pmol/mg, respectively.

Utility of the 18F-Florbetapir positron emission tomography in systemic amyloidosis.

Amyloidosis comprises a group of heterogeneous conditions. To ascertain the burden of disease is important because it can determine the treatment as well as the evolution of the disease. Recent reports have shown good results in diagnosing cardiac amyloidosis using 18F-florbetapir. We hypothesize that combining whole body PET/CT with 18F-Florbetapir can be useful to characterize the burden of the disease. We included 25 patients, 13 of them with different types of amyloidosis, and 12 with Alzheimer's disease as controls. Target-to-background ratio was computed for multiple organ using maximum standardized uptake values. Organ involvement was described (standardized techniques versus PET) according to different kinds of amyloidosis showing promising results in AA and AL types. Heart involvement showed poorer results when compared to tongue, lung or thyroid gland. Multiple organ involvement in patients previously labelled as having negative organ affectation could be identified. This is the first study to evaluate the utility of 18F-florbetapir in the assessment of the global extension of disease. Our results show that this technique is useful for its diagnosis.

Enantioconvergent hydrolysis of racemic styrene oxide at high concentration by a pair of novel epoxide hydrolases into (R)-phenyl-1,2-ethanediol.

OBJECTIVES: To prepare (R)-phenyl-1,2-ethanediol ((R)-PED) with high enantiomeric excess (ee p) and yield from racemic styrene oxide (rac-SO) at high concentration by bi-enzymatic catalysis. RESULTS: The bi-enzymatic catalysis was designed for enantioconvergent hydrolysis of rac-SO by a pair of novel epoxide hydrolases (EHs), a Vigna radiata EH3 (VrEH3) and a variant (AuEH2A250I) of Aspergillus usamii EH2. The simultaneous addition mode of VrEH3 and AuEH2A250I, exhibiting the highest average turnover frequency (aTOF) of 0.12 g h-1 g-1, was selected, by which rac-SO (10 mM) was converted into (R)-PED with 92.6% ee p and 96.3% yield. Under the optimized reaction conditions: dry weight ratio 14:1 of VrEH3-expressing E. coli/vreh3 to AuEH2A250I-expressing E. coli/Aueh2 A250I and reaction at 20 °C, rac-SO (10 mM) was completely hydrolyzed in 2.3 h, affording (R)-PED with 98% ee p. At the weight ratio 0.8:1 of rac-SO to two mixed dry cells, (R)-PED with 97.4% ee p and 98.7% yield was produced from 200 mM (24 mg/ml) rac-SO in 10.5 h. CONCLUSIONS: Enantioconvergent hydrolysis of rac-SO at high concentration catalyzed by both VrEH3 and AuEH2A250I is an effective method for preparing (R)-PED with high ee p and yield.

An optimized two-step derivatization method for analyzing diethylene glycol ozonation products using gas chromatography and mass spectrometry.

The ozonation of hydroxyl compounds (e.g., sugars and alcohols) gives a broad range of products such as alcohols, aldehydes, ketones, and carboxylic acids. This study developed and optimized a two-step derivatization procedure for analyzing polar products of aldehydes and carboxylic acids from the ozonation of diethylene glycol (DEG) in a non-aqueous environment using gas chromatography-mass spectrometry. Experiments based on Central Composite Design with response surface methodology were carried out to evaluate the effects of derivatization variables and their interactions on the analysis. The most desirable derivatization conditions were reported, i.e., oximation was performed at room temperature overnight with the o-(2,3,4,5,6-pentafluorobenzyl) hydroxyl amine to analyte molar ratio of 6, silylation reaction temperature of 70°C, reaction duration of 70min, and N,O-bis(trimethylsilyl)-trifluoroacetamide volume of 12.5µL. The applicability of this optimized procedure was verified by analyzing DEG ozonation products in an ultrafine condensation particle counter simulation system.

Adsorption of selected emerging contaminants onto PAC and GAC: Equilibrium isotherms, kinetics, and effect of the water matrix.

The removal of three emerging contaminants (ECs) (amitriptyline hydrochloride (AH), methyl salicylate (MS) and 2-phenoxyethanol (PE)) dissolved in several water matrices by means of their adsorption onto powdered activated carbon (PAC) and granular activated carbon (GAC) has been investigated. When dissolved in ultrapure water, adsorption of the ECs followed the trend of AH > MS > PE, with a positive effect of the adsorbent dose. According to the analysis of the adsorption isotherms and adsorption kinetics, PAC showed strongly higher adsorption efficiency in both capacity and velocity of the adsorption, in agreement with its higher mesoporosity. Equilibrium isotherm data were fitted by Langmuir and Freundlich models. Pseudo-second order kinetics modeled very successfully the adsorption process. Finally, the effect of the presence of dissolved organic matter (DOM) in the water matrices (ultrapure water, surface water and two effluents from wastewater treatment plants) on the adsorption of the selected ECs onto PAC was established, as well as its performance on the removal of water quality parameters. Results show a negative effect of the DOM content on the adsorption efficiency. Over 50% of organic matter was removed with high PAC doses, revealing that adsorption onto PAC is an effective technology to remove both micro-pollutants and DOM from water matrices.

Fe(III) and Fe(II) induced photodegradation of nonylphenol polyethoxylate (NPEO) oligomer in aqueous solution and toxicity evaluation of the irradiated solution.

Photodegradation of nonylphenol tri-ethoxylate (NPEO3) in aqueous solution, and the effects of Fe(III) or Fe(II) were studied. The increasing degradation kinetics of NPEO3 were observed when 500µM Fe(III) or Fe(II) was present in the solutions. Altered formation of NPEO oligomers with shorter EO chains, including nonyphenol (NP), NPEO1 and NPEO2, was observed in water and in solutions containing Fe(III) or Fe(II). The molar percentage yields of NP and NPEO1,2 production from NPEO3 photodegradation were approximately 20% in NPEO3 solution, while NPEO3 solution with Fe(III), this percentage increased to approximately 50%. In solution with Fe(II), the molar balance between the photodegradation of NPEO3 and the production of NP and NPEO1,2 was observed. A luminescent bacterium, Vibrio fischeri, was used to identify changes in the toxicity of NPEO3 solutions during the photodegradation process under different conditions, while dose addition (DA) model was used to estimate the toxicity of products. Toxicity of NPEO3/water solution increased significantly following the irradiation of UVA/UVB mixture. In contrast, obviously decreasing toxicity was observed when NPEO3 underwent photodegradation in the presence of Fe(III).

Seasonal changes and spatial distributions of nonylphenol ethoxylates in sewage treatment plant with BAF process.

Recently, there has been growing concern over the prevalence of Nonylphenol ethoxylates (NPnEOs) in the natural environment as these compounds are known endocrine disruptors. This study focuses on the seasonal variation and spatial distribution of NPnEOs in the wastewater of a full scale sewage treatment plant, operating a Biological Aerated Filter (BAF), in Harbin, a city in Northeast China. Water samples were collected seasonally from 2009 to 2010, with the findings revealing remarkable seasonal variations in the concentrations of NPnEOs. The total influent concentrations of short-chain NPnEOs (NP, NP1EO and NP2EO) measured during winter was 16 mg L-1, with decreasing concentrations observed during autumn, summer and spring of 89, 67 and 41 mg L-1, respectively. The concentrations of the short-chain NPnEOs measured during autumn become higher (89 mg L-1), with summer becoming the lowest (16 mg L-1). Although the removal efficiencies of short-chain NPnEOs in STP showed various trends in different seasons, they all achieve relatively good performance during summer and winter. The BAF process plays the main role in the elimination of short-chain NPnEOs compounds; however, the ambient temperatures were not found to significantly influence the removal efficiency of short-chain NPnEOs compounds from the STP.

Three-way spectrofluorimetric-assisted multivariate determination of nonylphenol ethoxylate and 2-naphtalene sulfonate in wastewater samples and optimization approach for their photocatalytic degradation by CoTiO3 nanostructure.

This study presents a new strategy for the simultaneous quantification of two industrial contaminants. The excitation-emission fluorescence data matrix combined with a three-way chemometric method, such as parallel factor analysis, was used for the determination of nonylphenol ethoxylate (NPE-9) as a nonionic surfactant and 2-naphthalene sulfonate (2-NS) in waste water samples. It is noticeable that this method can resolve overlapping signal into spectral and relative concentration profiles. By spiking the known concentrations of these compounds in the wastewater samples, the accuracy of the proposed methods was validated and recoveries of the spiked values were calculated. High recoveries (i.e. 90-110%) obtained for the waste water samples indicate the present method can be used successfully to determine the analytes concentration in the environmental contaminations. The photocatalytic degradation of NPE-9 and 2-NS in aqueous solution was studied using the CoTiO3 nanoparticles catalyst. It was synthesized by the sol-gel technique. The catalytic activity of the prepared nanoparticles was measured in a batch photoreactor containing appropriate solutions of these compounds with UV irradiation. The photodegradation process of these compounds was optimized by using the central composite design. The CoTiO3 showed high activity for UV-photocatalytic degradation of NPE-9 and 2-NS.

Enantiomeric fraction of styrene glycol as a biomarker of occupational risk exposure to styrene.

This work reports a new analytical approach for monitoring the enantiomeric ratios of styrene glycol (SG), encountered during the manufacture of plastics, by chiral liquid chromatography and the application as a biomarker for exposure to styrene. The isomers were separated using an AGP column running in the reverse phase and isocratic mode with a mobile phase consisting of 20 mM phosphate buffer saline (pH 4.15) and methanol at a flow rate of 0.8 mL/min. Photometric, polarimetric, and circular dichroism detectors were employed. The chromatographic enantioselective resolution (Rs) and selectivity index (α) values were determined to be 1.60 and 1.48 (by photometric detection), respectively. Calibration curves used for the quantification of the SG enantiomers were linear with a correlation coefficient >0.99; the detection limits were in the range of 0.03-0.16 µg, depending on the detector used. Recovery assays on synthetic samples (in triplicate) covering the full range of enantiomeric fractions (0.0-1.0) show accuracy values below 5% for the enantiomeric fraction (EF) in every case. An alternative method based on the measurement of anisotropy factors for the determination of EF, which is faster and does not require the separation of enantiomers, has also been developed. The enantiomeric excess of the toxicant biomarker styrene glycol has been determined. No previous direct enantioselective determination of styrene glycol was published.