The effect of carbon chain length of cross-linking agent on the functionality of carrier- free immobilized Thermomyces lanuginosa lipase particles.

The cross-linked enzyme (CLEs) of Thermomyces lanuginosa lipase (TLL) was prepared in an isocyanide-based multi-component reactions (ICMRs) platform by applying three di-acidic cross-linkers to unveil more factors contributing to the functional properties of CLEs. The linkers were 1,11-undecanedicarboxylic acid, azelaic acid, and adipic acid with 11, 7, and 4 carbon lengths, respectively, providing a proper tool to investigate the effect of linker length on the activity, stability, and selectivity of the resulting CLEs. The immobilization yields of 60-90 % and the specific activities of 168, 88.4 and 49 U/mg were obtained for the CLEs of 1,11-undecanedicarboxylic acid, azelaic acid, adipic acid, respectively. The lower activity of azelaic and adipic acid-mediated CLEs compared to the soluble TLL (110 U/mg) was explained by in silico calculations. The results revealed that as opposed to 1,11-undecanedicarboxylic acid, both linkers tended to penetrate the enzyme active site, thus resulting in a major inhibitory effect on the enzyme functionality. The thermal and co-solvent stability of the immobilized derivatives improved compared to those of free TLL. The selectivity of CLEs was also examined by catalytic release of main omega-3 fatty acids from fish oil, presenting the highest selectivity of 22 for the CLEs of azelaic acid.

Recombinant cellobiose dehydrogenase from Thermothelomyces thermophilus: Its functional characterization and applicability in cellobionic acid production.

The fungus Thermothelomyces thermophilus is a thermotolerant microorganism that has been explored as a reservoir for enzymes (hydrolytic enzymes and oxidoreductases). The functional analysis of a recombinant cellobiose dehydrogenase (MtCDHB) from T. thermophilus demonstrated a thermophilic behavior, an optimal pH in alkaline conditions for inter-domain electron transfer, and catalytic activity on cellooligosaccharides with different degree of polymerization. Its applicability was evaluated to the sustainable production of cellobionic acid (CBA), a potential pharmaceutical and cosmetic ingredient rarely commercialized. Dissolving pulp was used as a disaccharide source for MtCDHB. Initially, recombinant exoglucanases (MtCBHI and MtCBHII) from T. thermophilus hydrolyzed the dissolving pulp, resulting in 87% cellobiose yield, which was subsequently converted into CBA by MtCDHB, achieving a 66% CBA yield after 24 h. These findings highlight the potential of MtCDHB as a novel approach to obtaining CBA through the bioconversion of a plant-based source.

Structural and molecular insights into a bifunctional glycoside hydrolase 30 xylanase specific to glucuronoxylan.

Glycoside hydrolase (GH) 30 family xylanases are enzymes of biotechnological interest due to their capacity to degrade recalcitrant hemicelluloses, such as glucuronoxylan (GX). This study focuses on a subfamily 7 GH30, TtXyn30A from Thermothelomyces thermophilus, which acts on GX in an "endo" and "exo" mode, releasing methyl-glucuronic acid branched xylooligosaccharides (XOs) and xylobiose, respectively. The crystal structure of inactive TtXyn30A in complex with 23-(4-O-methyl-α-D-glucuronosyl)-xylotriose (UXX), along with biochemical analyses, corroborate the implication of E233, previously identified as alternative catalytic residue, in the hydrolysis of decorated xylan. At the -1 subsite, the xylose adopts a distorted conformation, indicative of the Michaelis complex of TtXyn30AEE with UXX trapped in the semi-functional active site. The most significant structural rearrangements upon substrate binding are observed at residues W127 and E233. The structures with neutral XOs, representing the "exo" function, clearly show the nonspecific binding at aglycon subsites, contrary to glycon sites, where the xylose molecules are accommodated via multiple interactions. Last, an unproductive ligand binding site is found at the interface between the catalytic and the secondary ß-domain which is present in all GH30 enzymes. These findings improve current understanding of the mechanism of bifunctional GH30s, with potential applications in the field of enzyme engineering.

Biocatalysts engineering by varying the binary CNTs-silica composition and the physicochemical characteristics of adsorbents for the immobilization of recombinant T. lanuginosus lipase.

Biocatalytic engineering was carried out by varying monotonically the binary CNTs-silica composition and, accordingly, the physicochemical characteristics of adsorbents developed for immobilization of recombinant T. lanuginosus lipase (rPichia/lip). The adsorbents based on composite carbon-silica materials (CCSMs) were produced by impregnating finely dispersed multi-walled carbon nanotubes with silica hydrosol followed by calcination in argon at 350°C; the mass ratio of the hydrophobic and the hydrophilic components varied over a wide range. Biocatalysts (BCs) for green low-temperature synthesis of various esters in a non-aqueous medium of organic solvents were prepared by adsorption of rPichia/lip with subsequent drying under ambient conditions. The characteristics of the CCSMs and BCs were characterized by thermogravimetry, nitrogen porosimetry and electron microscopy. The catalytic properties of BCs, such as enzymatic activity, substrate conversion and specificity, as well we their operational stability depending on the chemical composition of CCSMs were extensively studied in the esterification of saturated monocarboxylic acids (C4, C7, C18) and primary aliphatic alcohols (C2, C4, C16) in hexane at 20°C. It was found that the esterifying activity manyfold decreased with increasing the silica content primarily due to a decrease in adsorption ability of CCSMs toward rPichia/lip. The substrate specificity and operational stability of the lipase-active BCs did not greatly depend on the composition of CCSMs. Biocatalysts retained more than half of their initial esterifying activity after 10 reaction cycles.

Application of Thermomyces lanuginosus polygalacturonase produced in Komagataella phaffii in biomass hydrolysis and textile bioscouring.

In this work, the polygalacturonase (TL-PG1) from the thermophilic fungus Thermomyces lanuginosus was heterologously produced for the first time in the yeast Komagataella phaffii. The TL-PG1 was successfully expressed under the control of the AOX1 promoter and sequentially purified by His-tag affinity. The purified recombinant pectinase exhibited an activity of 462.6 U/mL toward polygalacturonic acid under optimal conditions (pH 6 and 55 ˚C) with a 2.83 mg/mL and 0.063 µmol/minute for Km and Vmax, respectively. When used as supplementation for biomass hydrolysis, TL-PG1 demonstrated synergy with the enzymatic cocktail Ctec3 to depolymerize orange citrus pulp, releasing 1.43 mg/mL of reducing sugar. In addition, TL-PG1 exhibited efficiency in fabric bioscouring, showing potential usage in the textile industry. Applying a protein dosage of 7 mg/mL, the time for the fabric to absorb water was 19.77 seconds (ten times faster than the control). Adding the surfactant Triton to the treatment allowed the reduction of the enzyme dosage by 50% and the water absorption time to 6.38 seconds. Altogether, this work describes a new versatile polygalacturonase from T. lanuginosus with the potential to be employed in the hydrolysis of lignocellulosic biomass and bioscouring.

Biochemical characterization of a thermophilic exo-arabinanase from the filamentous fungus Rasamsonia emersonii.

Arabinan in plant cell wall constitutes a major source of arabinose and arabino-oligosaccharides in nature. Exo-α-l-1,5-arabinanases release arabinose or arabino-oligosaccharides from arabinan in an exo-acting manner and therefore contribute to arabinan degradation. In this study, an exo-α-l-1,5-arabinanase belonging to GH93 family was identified from the thermophilic filamentous fungus Rasamsonia emersonii. The corresponding encoding gene (Reabn93) was cloned from the R. emersonii genome and heterologously expressed in Pichia pastoris. The purified recombinant ReAbn93 exhibited the maximum activity at 70 °C and retained 70% of its activity after incubation at 70 °C for 3 h ReAbn93 had an acidic pH optimum (pH 4.0) but remained stable over a broad pH range (pH 3-9). The specific activity of ReAbn93 toward linear arabinan under optimal conditions was 466.08 U mg-1. Similar to the few other reported GH93 members, ReAbn93 degrades linear arabinan or arabino-oligosaccharides in an exo-acting manner with arabinobiose as the only hydrolytic product. Of note, ReAbn93 possessed remarkably better thermostability and higher specific activity compared to the only reported thermophilic counterpart in GH93, and therefore holds potential in relevant biotechnological applications.

The changing face of SDS denaturation: Complexes of Thermomyces lanuginosus lipase with SDS at pH 4.0, 6.0 and 8.0.

HYPOTHESIS: Lipases are widely used in the detergent industry and must withstand harsh conditions involving both anionic and zwitterionic surfactants at alkaline pH. Thermomyces lanuginosus lipase (TlL) is often used and stays active at high concentrations of the anionic surfactant sodium dodecyl sulfate (SDS) at pH 8.0, but is sensitive to SDS at pH 6.0 and below. We propose that enhanced stability at pH 8.0 results from a structurally distinct complex formation with SDS. EXPERIMENTS: We use small-angle X-ray scattering (SAXS) to elucidate structures of TlL:SDS at pH 4.0, 6.0, and 8.0 and further investigate the complexes at pH 8.0 using hydrogen/deuterium exchange mass spectrometry (HDX-MS). FINDINGS: At pH 4.0, large dense aggregates are formed at low [SDS], which become gradually less dense at higher [SDS], resulting in a core-shell structure. At pH 6.0, SDS induces a TlL dimer and forms a hemi-micelle along the side of the dimer. At higher [SDS], TlL adopts a core-shell structure. At pH 8.0, TlL forms a dimer with a SDS hemi-micelle but avoids a core-shell structure and maintains activity. Three helices are identified as SDS anchor points. This study provides important structural insight into the stability of TlL towards SDS under alkaline conditions.

Unprecedented Biodegradable Cellulose-Derived Polyesters with Pendant Citronellol Moieties: From Monomer Synthesis to Enzymatic Degradation.

Levoglucosenone (LGO) is a cellulose-derived molecule that is present commercially on a multi-ton/year scale. Taking advantage of the α,ß-conjugated ketone of LGO, a new citronellol-containing 5-membered lactone (HBO-citro) was synthesized through a one-pot two-step pathway involving oxa-Michael addition and Baeyer-Villiger oxidation. The solvent-free treatment of HBO-citro with NaBH4 at room temperature led to the full reduction of the lactone moiety which gave a novel fully renewable triol monomer having a citronellol side chain (Triol-citro). Noticeably, by simply changing the reducing agent, temperature and reaction duration, the partial reduction of HBO-citro can be achieved to yield a mixture of 5- and 6-membered Lactol-citro molecules. Triol-citro was chosen to prepare functional renewable polyesters having citronellol pendant chains via polycondensation reactions with diacyl chlorides having different chain lengths. Good thermal stability (Td5% up to 170 °C) and low glass transition temperatures (as low as -42 °C) were registered for the polyesters obtained. The polymers were then hydrolyzed using a commercial lipase from Thermomyces lanuginosus (Lipopan® 50 BG) to assess their biodegradability. A higher degradation profile was found for the polyesters prepared using co-monomers (acyl chlorides) having longer chain lengths. This is likely due to the decreased steric hindrance around the ester bonds which allowed enhanced accessibility of the enzyme.

Recombinant production and characterisation of two chitinases from Rasamsonia emersonii, and assessment of their potential industrial applicability.

Rasamsonia emersonii (previously Talaromyces emersonii) is a thermophilic filamentous fungus displaying optimum growth at 45 °C. It has a history of use in commercial food enzyme production. Its unfractionated chitinolytic secretome was partially characterised in the early 1990s; however, no individual chitinase from this source has been described in literature previously. This study describes two GH18 chitinases originating from the R. emersonii genome, expressed in the methylotrophic yeast P. pastoris. Chit1 comprises of a GH18 catalytic domain and Chit2 comprises of a GH18 catalytic domain and a chitin-binding motif at the C-terminal. The chitinases were expressed as glycoproteins. The apparent molecular weight of Chit1 was 35.8-42.1 kDa with a smearing tail associated with glyco-sidechains visible up to 72.2 kDa. This became two bands of 30.8 and 29.0 kDa upon de-glycosylation. The apparent molecular weight of Chit2 was 50.4 kDa, reducing to 48.2 kDa upon de-glycosylation. Both chitinases displayed endo-chitinase and chitobiosidase activity, temperature optima of 50-55 °C and low pH optima (pH 4.5 or lower); Chit1 displayed a pH optimum of 3.5, retaining > 60% maximum activity at pH 2.2, a pH range lower than most enzymes of fungal origin. Chit2 displayed the highest chitin-degrading ability at 3456 µmol/mg on 4-NP-triacetylchitotriose, but lost activity faster than Chit1, which displayed 403 µmol/mg on the same substrate. The predicted D values (time required to reduce the enzyme activity to 10% of its original value at 50 °C) were 19.2 and 2.3 days for Chit1 and Chit2, respectively. Thus, Chit1 can be considered one of few hyperthermostable chitinase enzymes described in literature to date. Their physicochemical properties render these chitinases likely suitable for shrimp chitin processing including one-step chitin hydrolysis and alternative sustainable protein processing and the attractive emerging application of mushroom food waste valorisation.Key points• Two GH18 chitinases originating from the industrially relevant thermophilic fungus R. emersonii were cloned and expressed in P. pastoris.• The purified recombinant chitinases showed low pH and high temperature optima and appreciable thermostability at industrially relevant temperatures.• The chitinases displayed characteristics that indicate their likely suitability to several industrial applications including sustainable alternative protein processing, food waste valorisation of commercial mushroom production and one-step shrimp chitin processing.

Enzyme-support interactions and inactivation conditions determine Thermomyces lanuginosus lipase inactivation pathways: Functional and florescence studies.

Lipase from Thermomyces lanuginosus (TLL) has been covalently immobilized on heterofunctional octyl-vinyl agarose. That way, the covalently immobilized enzymes will have identical orientation. Then, it has blocked using hexyl amine (HEX), ethylenediamine (EDA), Gly and Asp. The initial activity/stability of the different biocatalysts was very different, being the most stable the biocatalyst blocked with Gly. These biocatalysts had been utilized to analyze if the enzyme activity could decrease differently along thermal inactivation courses depending on the utilized substrate (that is, if the enzyme specificity was altered during its inactivation using 4 different substrates to determine the activity), and if this can be altered by the nature of the blocking agent and the inactivation conditions (we use pH 5, 7 and 9). Results show great changes in the enzyme specificity during inactivation (e.g., activity versus triacetin was much more quickly lost than versus the other substrates), and how this was modulated by the immobilization protocol and inactivation conditions. The difference in the changes induced by immobilization and inactivation were confirmed by fluorescence studies. That is, the functional and structural analysis of partially inactivated immobilized enzyme showed that their inactivation pathway is strongly depended on the support features and inactivation conditions.

Identification and engineering on the nonconserved residues of metallo-ß-lactamase-type thioesterase to improve the enzymatic activity.

The standalone metallo-ß-lactamase-type thioesterase (MßL-TE), belongs to the group V nonreducing polyketide synthase agene cluster, catalyzes the rate-limiting step of product releasing. Our work first investigated on the orthologous MßL-TEs from different origins to determine which nonconserved amino acid residues are important to the hydrolysis efficiency. A series of chimeric MßL-TEs were constructed by fragment swapping and site-directed mutagenesis, in vivo enzymatic assay showed that two nonconserved residues A19 and E75 (numbering in HyTE) were critical to the catalytic performance. Protein structure modeling suggested that these two residues are located in different areas of HyTE. A19 is on the entrance to the active sites, whereas E75 resides in the linker between the two ß strands which hold the metal-binding sites. Combining with computational simulations and comparative enzymatic assay, different screening criteria were set up for selecting the variants on the two noncatalytic and nonconserved key residues to improve the catalytic activity. The rational design on A19 and E75 gave five candidates in total, two (A19F and E75Q) of which were thus found significantly improved the enzymatic performance of HyTE. The double-point mutant was constructed to further improve the activity, which was increased by 28.4-fold on product accumulation comparing to the wild-type HyTE. This study provides a novel approach for engineering on nonconserved residues to optimize enzymatic performance.

Single-Molecule Study of Thermomyces lanuginosus Lipase in a Detergency Application System Reveals Diffusion Pattern Remodeling by Surfactants and Calcium.

Lipases comprise one of the major enzyme classes in biotechnology with applications within, e.g., baking, brewing, biocatalysis, and the detergent industry. Understanding the mechanisms of lipase function and regulation is therefore important to facilitate the optimization of their function by protein engineering. Advances in single-molecule studies in model systems have provided deep mechanistic insights on lipase function, such as the existence of functional states, their dependence on regulatory cues, and their correlation to activity. However, it is unclear how these observations translate to enzyme behavior in applied settings. Here, single-molecule tracking of individual Thermomyces lanuginosus lipase (TLL) enzymes in a detergency application system allowed real-time direct observation of spatiotemporal localization, and thus diffusional behavior, of TLL enzymes on a lard substrate. Parallelized imaging of thousands of individual enzymes allowed us to observe directly the existence and quantify the abundance and interconversion kinetics between three diffusional states that we recently provided evidence to correlate with function. We observe redistribution of the enzyme's diffusional pattern at the lipid-water interface as well as variations in binding efficiency in response to surfactants and calcium, demonstrating that detergency effectors can drive the sampling of lipase functional states. Our single-molecule results combined with ensemble activity assays and enzyme surface binding efficiency readouts allowed us to deconvolute how application conditions can significantly alter protein functional dynamics and/or surface binding, both of which underpin enzyme performance. We anticipate that our results will inspire further efforts to decipher and integrate the dynamic nature of lipases, and other enzymes, in the design of new biotechnological solutions.

Computational and experimental analysis on the preferential selectivity of lipases for triglycerides in Licuri oil.

In the present study, we demonstrated the use of molecular docking as an efficient in silico screening tool for lipase-triglyceride interactions. Computational simulations using the crystal structures from Burkholderia cepacia lipase (BCL), Thermomyces lanuginosus lipase (TLL), and pancreatic porcine lipase (PPL) were performed to elucidate the catalytic behavior with the majority triglycerides present in Licuri oil, as follows: caprilyl-dilauryl-glycerol (CyLaLa), capryl-dilauryl-glycerol (CaLaLa), capryl-lauryl-myristoyl-glycerol (CaLaM), and dilauryl-myristoyl-glycerol (LaLaM). The computational simulation results showed that BCL has the potential to preferentially catalyze the major triglycerides present in Licuri oil, demonstrating that CyLaLa, (≈25.75% oil composition) interacts directly with two of the three amino acid residues in its catalytic triad (Ser87 and His286) with the lowest energy (-5.9 kcal/mol), while other triglycerides (CaLaLa, CaLaM, and LaLaM) interact with only one amino acid (His286). In one hard, TLL showed a preference for catalyzing the triglyceride CaLaLa also interacting with His286 residue, but, achieving higher binding energies (-5.3 kcal/mol) than found in BCL (-5.7 kcal/mol). On the other hand, PPL prefers to catalyze only with LaLaM triglyceride by His264 residue interaction. When comparing the computational simulations with the experimental results, it was possible to understand how BCL and TLL display more stable binding with the majority triglycerides present in the Licuri oil, achieving conversions of 50.86 and 49.01%, respectively. These results indicate the production of fatty acid concentrates from Licuri oil with high lauric acid content. Meanwhile, this study also demonstrates the application of molecular docking as an important tool for lipase screening to reach a more sustainable production of fatty acid concentrates from vegetable oils.

Agroindustrial Wastes as a Support for the Immobilization of Lipase from Thermomyces lanuginosus: Synthesis of Hexyl Laurate.

As a consequence of intense industrialization in the last few decades, the amount of agro-industrial wastes has increasing, where new forms of valorization are crucial. In this work, five residual biomasses from Maranhão (Brazil) were investigated as supports for immobilization of lipase from Thermomyces lanuginosus (TLL). The new biocatalysts BM-TLL (babaçu mesocarp) and RH-TLL (rice husk) showed immobilization efficiencies >98% and hydrolytic activities of 5.331 U g-1 and 4.608 U g-1, respectively, against 142 U g-1 by Lipozyme® TL IM. High esterification activities were also found, with 141.4 U g-1 and 396.4 U g-1 from BM-TLL and RH-TLL, respectively, against 113.5 U g-1 by TL IM. Results of porosimetry, SEM, and BET demonstrated BM and RH supports are mesoporous materials with large hydrophobic area, allowing a mixture of hydrophobic adsorption and confinement, resulting in hyperactivation of TLL. These biocatalysts were applied in the production of hexyl laurate, where RH-TLL was able to generate 94% conversion in 4 h. Desorption with Triton X-100 and NaCl confirmed that new biocatalysts were more efficient with 5 times less protein than commercial TL IM. All results demonstrated that residual biomass was able to produce robust and stable biocatalysts containing immobilized TLL with better results than commercial preparations.

Surface charge engineering of Thermomyces lanuginosus lipase improves enzymatic activity and biodiesel synthesis.

OBJECTIVES: This study was aimed at engineering charged residues on the surface of Thermomyces lanuginosus lipase (TLL) to obtain TLL variant with elevated performance for industrial applications. RESULTS: Site-directed mutagenesis of eight charged amino acids on the TLL surface were conducted and substitutions on the negatively charged residues D111, D158, D165, and E239 were identified with elevated specific activities and biodiesel yields. Synergistic effect was not discovered in the double mutants, D111E/D165E and D165E/E239R, when compared with the corresponding single mutants. One TLL mutant, D165E, was identified with increased specific activity (456.60 U/mg), catalytic efficiency (kcat/Km: 44.14 s-1 mM-1), the highest biodiesel conversion yield (93.56%), and comparable thermostability with that of the TLL. CONCLUSIONS: Our study highlighted the importance of surface charge engineering in improving TLL activity and biodiesel production, and the resulting TLL mutant, D165E, is a promising candidate for biodiesel industry.

Enzymatic acylation of rutin with benzoic acid ester and lipophilic, antiradical, and antiproliferative properties of the acylated derivatives.

Rutin (3',4',5,7-tetrahydroxy-flavone-3-rutinoside) was enzymatically acylated with benzoic acid and its esters (methyl benzoate and vinyl benzoate) using Thermomyces lanuginosus lipase (Lipozyme TLIM). The acylation reaction was optimized by varying the reaction medium, reaction temperature, acyl donor, substrate molar ratio, and reaction time. The highest conversion yield (76%) was obtained in tert-amyl alcohol (60 °C, 72 hr) using vinyl benzoate (molar ratio of 1:10) as acyl donor. The acylation occurred at the 2'''-OH and 4'''-OH of the rhamnose unit and the 2''-OH position of the glucose moieties. Three novel rutin acylated derivatives (compounds 1-3) were purified and characterized by HR-MS and 1D and 2D NMR spectroscopy. We found that acylation significantly improved lipophilicity, capacity to inhibit lipid peroxidation, anticancer capacity and substantially maintained the antioxidant activity of rutin. This research provides important insights in the acylation of flavonoids with different glycosyl moieties. PRACTICAL APPLICATION: In this study, three novel rutin derivatives were successfully synthesized and the highest conversion yield (76%) was obtained by reacting the rutin and vinyl benzoate at molar ratio of 1:10 in tert-amyl alcohol for 72 hr at 60 °C. Introducing a benzoic acid substituent into rutin molecule significantly improved their lipophilicity and inhibition of lipid peroxidation in lipophilic system. Furthermore, this study demonstrated that acylation significantly improved anticancer capacity and substantially maintained the antioxidant activity.

Crystal structure of a thermophilic fungal cyanase and its implications on the catalytic mechanism for bioremediation.

Cyanase catalyzes the bicarbonate-dependent degradation of cyanate to produce ammonia and carbon dioxide, and ammonia is a considerable alternative nitrogen source. Strikingly, the cyanase from the thermophilic fungus Thermomyces lanuginosus (Tl-Cyn) has the highest catalytic efficiency reported among these enzymes. However, its molecular mechanism of action is not clearly understood, because currently there is no structural information available on fungal cyanases. Here we report the crystal structure of Tl-Cyn in complex with inhibitors malonate and formate at 2.2 Å resolution. The structure reveals extensive interactions at the subunit interfaces in a dimer, and a decamer is formed by a pentamer of these dimers. Our biochemical, kinetic and mutagenesis studies confirm the structural observations on the complex and provide further insights into its catalytic mechanism and inhibition. The structure has also aided the creation of a mutant enzyme with enhanced catalytic activity, and such enzymes may have the potential for biotechnological applications, including biotransformation and bioremediation. Moreover, other fungal cyanases with potentially high catalytic activity could also be predicted based on the Tl-Cyn structure, as the active site region among fungal cyanases are highly conserved.

Purification, characterization and partial amino acid sequences of thermo-alkali-stable and mercury ion-tolerant xylanase from Thermomyces dupontii KKU-CLD-E2-3.

We investigated the properties of the low molecular weight thermo-alkali-stable and mercury ion-tolerant xylanase production from Thermomyces dupontii KKU-CLD-E2-3. The xylanase was purified to homogeneity by ammonium sulfate, Sephadex G-100 and DEAE-cellulose column chromatography which resulted 27.92-fold purification specific activity of 56.19 U/mg protein and a recovery yield of 2.01%. The purified xylanase showed a molecular weight of 25 kDa by SDS-PAGE and the partial peptide sequence showed maximum sequence homology to the endo-1,4-ß-xylanase. The optimum temperature and pH for its activity were 80 °C and pH 9.0, respectively. Furthermore, the purified xylanase can maintain more than 75% of the original activity in pH range of 7.0-10.0 after incubation at 4 °C for 24 h, and can still maintain more than 70% of original activity after incubating at 70 °C for 90 min. Our purified xylanase was activated by Cu2+ and Hg2+ up to 277% and 235% of initial activity, respectively but inhibited by Co2+, Ag+ and SDS at a concentration of 5 mM. The Km and Vmax values of beechwood xylan were 3.38 mg/mL and 625 µmol/min/mg, respectively. Furthermore, our xylanase had activity specifically to xylan-containing substrates and hydrolyzed beechwood xylan, and the end products mainly were xylotetraose and xylobiose. The results suggested that our purified xylanase has potential to use for pulp bleaching in the pulp and paper industry.

X-ray structure analysis of a unique D-amino-acid oxidase from the thermophilic fungus Rasamsonia emersonii strain YA.

D-Amino-acid oxidases (DAAOs) catalyze the oxidative deamination of neutral and basic D-amino acids. The DAAO from the thermophilic fungus Rasamsonia emersonii strain YA (ReDAAO) has a high thermal stability and a unique broad substrate specificity that includes the acidic D-amino acid D-Glu as well as various neutral and basic D-amino acids. In this study, ReDAAO was crystallized by the hanging-drop vapor-diffusion method and its crystal structure was determined at a resolution of 2.00 Å. The crystal structure of the enzyme revealed that unlike other DAAOs, ReDAAO forms a homotetramer and contains an intramolecular disulfide bond (Cys230-Cys285), suggesting that this disulfide bond is involved in the higher thermal stability of ReDAAO. Moreover, the structure of the active site and its vicinity in ReDAAO indicates that Arg97, Lys99, Lys114 and Ser231 are candidates for recognizing the side chain of D-Glu.

Immobilized Phospholipase A1-Catalyzed Preparation of l-α-Glycerylphosphorylcholine from Phosphatidylcholine.

This study sought to prepare a cognitive enhancer l-α-glycerylphosphorylcholine (l-α-GPC) using an immobilized Lecitase Ultra (LU, phospholipase A1) to catalyze the hydrolysis of soy phosphatidylcholine (PC). Immobilization of LU on Lewatit VP OC 1600 provided the highest fixation level (83.1 g/100 g) and greatest catalytic activity achieving 100 g/100 g l-α-GPC within 20 h and was therefore selected as the optimal system for biocatalysis. Immobilization of LU increased its positional specificity compared to free LU, as shown by a decrease in the production of the phosphocholine byproduct. Under the optimal conditions determined by response surface methodology, PC was completely hydrolyzed to l-α-GPC and required a simple purification via phase separation of the biphasic media to obtain a yield of ∼26.4 g l-α-GPC from 100 g PC, with a purity of 98.5 g/100 g. Our findings suggest a possibility of using the immobilized LU as a new biocatalyst for the l-α-GPC production.