Unravelling taphono-myths. First large-scale study of histotaphonomic changes and diagenesis in bone from modern surface depositions.

The use of diagenetic alterations in bone microstructure ('histotaphonomy') as indicators of funerary treatment in the past and for post-mortem interval calculations in forensic cases has received increasing attention in the last decade. Studies have used histological changes to conclude in-situ decomposition, mummification, infanticide and post-mortem interval. There has been very little attempt to experimentally validate the links between decomposition, depositional conditions, time-since-death and microscopic changes in human bone so that meaningful interpretations of archaeological and forensic observations can be made. Here, we address this problem experimentally using the largest sample of human remains from anatomical donors and the longest-term deposition framework to date. This study tests one key assumption of histotaphonomy; that putrefaction during the early stages of decay is reflected in bone microanatomy and composition. Seventeen human donors and six pigs were deposited on the surface in a known Australian environment and left to decompose between 463 and 1238 days. All remains underwent all stages of decomposition reaching skeletonisation. Rib and femur samples were analysed using conventional histological methods and scanning electron microscopy, by applying the Oxford Histological Index, and examining collagen birefringence, microcracking and re- and de mineralisation. Biomolecular changes of the femoral samples were analysed using Fourier-transform infrared (FTIR) spectroscopy. The results indicate that bioerosion in human bone does not occur due to putrefaction. There were no correlations between bone histology and the following variables: human vs pigs, season, primary vs secondary deposition, position, fresh vs frozen and time-since-deposition. Furthermore, no trends were observed between biomolecular changes and time-since-deposition. The study also shows that pigs cannot be used as substitutes for human remains for bone biodegradation research. This is the first, controlled, larger scale study of human remains providing a lack of support for a long-assumed relationship between putrefaction and bone histology bioerosion. Using bone degradation as an argument to prove putrefaction, in-situ decomposition and early taphonomic processes cannot be supported based on the experimental human data presented.

Intraoperative estimation of natural femoral anteversion from proximal femoral osseous orientation during total hip arthroplasty.

BACKGROUND: The purpose of this study was to elucidate the relationship between the orientation of the osseous structure of the proximal femur encountered during total hip arthroplasty (THA) and preoperative femoral anteversion (FA). METHODS: Three-dimensional models were constructed using full-length lower extremity computed tomography images from a total of 80 participants. Femoral neck cutting was performed at heights of 5, 10, and 15 mm relative to the lesser trochanter. Following neck cutting, the angles formed by the anterior outer cortex and posterior outer cortex with the posterior condylar line (PCL) were defined as the anterior cortical angle (ACA) and posterior cortical angle (PCA), respectively. Univariate linear regression analysis was conducted using the remaining measurements with FA as the dependent variable. RESULTS: The mean age of the participants was 60.98 ± 10.82 years (males, 60.50 ± 11.36 years; females, 61.45 ± 10.37 years) (p = 0.697). All cortical angles and FA were larger in women compared to those in men. When comparing measurements by age groups, no statistically significant differences were observed. Univariate linear regression analysis with FA as the dependent variable showed statistical significance for all cortical angles. The adjusted R2 values were 0.711 (ACA5), 0.677 (ACA10), 0.572 (ACA15), 0.493 (PCA5), 0.574 (PCA10), and 0.446 (PCA15). CONCLUSION: Natural FA can be inferred from the anterior cortical angle (ACA) from femoral neck cutting plane observed during the THA procedure without preoperative images. TRIAL REGISTRATION: Retrospectively registered.

Effects of GBT1118, a voxelotor analog, on bone disease in sickle cell disease mice.

We assessed the effect of GBT1118, a sickle hemoglobin polymerization inhibitor on bone loss in humanized sickle cell disease (SCD) mice. Healthy control (Ctrl) 4-months-old female and male mice were fed Vehicle-chow for 2-months, while SCD mice were fed Vehicle-chow or GBT1118-chow. By micro-CT, GBT1118 significantly increased femur metaphyseal trabecular thickness (Tb.Th) and tissue mineral density (TMD), and significantly decreased trabecular spacing in female SCD mice. In SCD male mice, there was significant reduction in epiphyseal trabecular bone volume fraction (BV/TV), Tb.Th and TMD and GBT1118 significantly increased BV/TV and TMD but not Tb.Th. A significant decrease in cortical area fraction in SCD female mice was rescued by GBT1118 but not SCD males. Markedly decreased mineralized femur trabeculae in SCD females and males was partially rescued by GBT1118. Bone histomorphometry of femurs demonstrated significantly decreased bone formation parameters and increased bone resorption parameters in SCD mice of both sex that were rescued by GBT1118. Significant alteration in bone and hypoxia related genes of SCD mice of both sexes were differentially modulated by GBT1118. We conclude that "a sickle hemoglobin polymerization inhibitor" might be efficacious in improving some parameters of SCD bone loss.

Medial open wedge osteotomy yields comparable stability to lateral open wedge procedure on the distal femur.

BACKGROUND: Supracondylar osteotomies are a frequently and successfully used technique in the treatment of coronal plane deformities and unicompartmental osteoarthritis of the knee. While lateral open wedge techniques are common for valgus deformities, the data about medial open wedge techniques for varus deformities is sparse. The aim of this study was to compare the biomechanical properties of medial and lateral open wedge osteotomies using a locking Tomofix® plate (DePuy Synthes, Oberdorf, Switzerland). Our hypothesis was that there would be no difference regarding biomechanical outcome parameters between these two groups. METHODS: Medial and lateral open wedge osteotomies were performed in composite bone model as routine. Each experimental group contained 6 constructs. Standardized osteotomy gaps of ten millimeters were performed and Tomofix® plates were fixed to third generation composite bones. The constructs were subsequently mounted into a servohydraulic testing machine. Axial and torsional loadings were applied as described in previous experimental studies. All specimens were subject to a load to failure mode with the mechanism of failure being noted. FINDINGS: Both experimental groups showed comparable biomechanical properties under axial and torsional loadings. Mean high force axial stiffness was 3772 N/mm for lateral and 4185 N/mm for the medial construct. Significant differences were noted for torsional stiffness under low- (0 N) and mid-force (150 N) loadings (P = 0.002; P = 0.009), favoring the medial open wedge constructs. INTERPRETATION: Medial open wedge osteotomy yields comparable biomechanical stability to the lateral open wedge procedure on the distal femur in a composite bone model.

Morphologic Response in Femoral Cartilage During and After 40-Minute Treadmill Running.

CONTEXT: It is unclear whether the response in femoral cartilage to running at different intensities is different. OBJECTIVE: To examine the acute patterns of deformation and recovery in femoral cartilage thickness during and after running at different speeds. DESIGN: Crossover study. SETTING: Laboratory. PATIENTS OR OTHER PARTICIPANTS: A total of 17 healthy men (age = 23.9 ± 2.3 years, height = 173.1 ± 5.5 cm, mass = 73.9 ± 8.0 kg). INTERVENTION(S): Participants performed a 40-minute treadmill run at speeds of 7.5 and 8.5 km/h. MAIN OUTCOME MEASURE(S): Ultrasonographic images of femoral cartilage thickness (intercondylar, lateral condyle, and medial condyle) were obtained every 5 minutes during the experiment (40 minutes of running followed by a 60-minute recovery period) at each session. Data were analyzed using analysis of variance and Bonferroni- and Dunnett-adjusted post hoc t tests. To identify patterns of cartilage response, we extracted principal components (PCs) from the cartilage-thickness data using PC analysis, and PC scores were analyzed using t tests. RESULTS: Regardless of time, femoral cartilage thicknesses were greater for the 8.5-km/h run than the 7.5-km/h run (intercondylar: F1,656 = 24.73, P < .001, effect size, 0.15; lateral condyle: F1,649 = 16.60, P < .001, effect size, 0.16; medial condyle: F1,649 = 16.55, P < .001, effect size, 0.12). We observed a time effect in intercondylar thickness (F20,656 = 2.15, P = .003), but the Dunnett-adjusted post hoc t test revealed that none of the time point values differed from the baseline value (P > .38 for all comparisons). Although the PC1 and PC2 captured the magnitudes of cartilage thickness and time shift (eg, earlier versus later response), respectively, t tests showed that the PC scores were not different between 7.5 and 8.5 km/h (intercondylar: P ≥ .32; lateral condyle: P ≥ .78; medial condyle: P ≥ .16). CONCLUSIONS: Although the 40-minute treadmill run with different speeds produced different levels of fatigue, morphologic differences (<3%) in the femoral cartilage at both speeds seemed to be negligible.

[AI-HIP system for prosthesis size, global femoral offset and osteotomy in total hip arthroplasty].

OBJECTIVE: To explore planning effect of AI-HIP assisted surgical planning system in primary unilateral total hip arthroplasty (THA) and its influence on clinical outcomes. METHODS: A retrospective analysis was conducted on clinical data of 36 patients who underwent their first unilateral THA from March 2022 to November 2022 and continuously used AI-HIP system (AI-HIP group), including 16 males and 20 females, aged from 43 to 81 years old with an average of (62.2±10.9) years old. According to the matching principle, 36 patients who were planned by the traditional template method at the same period were selected as the control group, including 16 males and 20 females, aged from 40 to 80 years old with an average of (60.9±12.1) years old. The accuracy between two groups of prostheses were compared, as well as the combined eccentricity difference between preoperative planning and postoperative practice, lower limb length difference, osteotomy height from the upper edge of the lesser trochanter and top shoulder distance to evaluate planning effect. Harris score and visual analogue scale (VAS) were used to evaluate clinical efficacy. RESULTS: Both groups were followed up for 12 to 18 months with an average of (14.5±2.1) months. The complete accuracy and approximate accuracy of acetabular cup and femoral stalk prosthesis in AI-HIP group were 72.2%, 100%, 58.3%, 88.9%, respectively, which were better than 44.4%, 83.3%, 33.3%, 66.7% in control group (P<0.05). There was no statistical significance in planning of femoral head prosthesis size (P>0.05). The actual combined eccentricity difference and combined eccentricity difference (practical-planning) in AI-HIP group were 1.0(0.2, 2.4) mm and 1.1(-2.1, 3.2) mm, respectively;which were better than 3.0 (1.4, 4.9) mm and 3.5 (-1.6, 6.5) mm in control group (P<0.05). There was no significant difference between two groups in actual osteotomy height of the upper margin of the lesser trochanter (P>0.05). In AI-HIP group, the actual difference of lower extremity length after surgery, the difference of lower extremity length (practical-planning), osteotomy height from the upper margin of lesser trochanter (practical-planning), actual topshoulder distance after surgery, and topshoulder distance (practical-planning) were 1.5 (0.2, 2.8), 1.1 (-0.3, 2.2), 2.1(-2.3, 4.1), (15.3±4.1), 2.2(-4.8, 0.3) mm, respectively;which were better than control group of 2.6(1.3, 4.1), 2.5 (0.3, 3.8), 5.8(-2.4, 7.7), (13.0±4.3), -5.7(-9.4, -2.2) mm(P<0.05). At final follow-up, there were no significant differences in Harris scores of pain, function, deformity, total scores and VAS between two groups (P>0.05). The range of motion score was 4.8±0.6 in AI-HIP group, which was higher than that in control group (4.4±0.8)(P<0.05). CONCLUSION: Compared with traditional template planning, AI-HIP assisted surgical planning system has good accuracy in predicting the prosthetic size of the acetabular cup and femoral stalk, restoring joint eccentricity, planning lower limb length, osteotomy height and top shoulder distance on the first unilateral THA, and the clinical follow-up effect is satisfactory.

Analysis of correlation between medial joint line change and lower limb coronal alignment after Oxford unicompartmental knee arthroplasty.

BACKGROUND: Lower limb coronal alignment was thought to be a predictive factor for Unicompartmental Knee Arthroplasty (UKA) result. The tibial bony resection and implant position lead to joint line change postoperatively. Analysis was done to find out the correlation between these factors. METHODS: From 2019 to 2021, 90 medial Oxford UKA were implanted by a single surgeon. Hip Knee Ankle Angle (HKAA), Lateral Distal Femoral Angle (LDFA), Medial Proximal Tibial Angle (MPTA), and intraoperative bony resection thickness were measured. The medial joint line change was calculated. The correlation between joint line change and alignment change was evaluated. RESULTS: The mean tibial resection thickness was 4.3 mm. The mean tibial joint line was elevated by 2.3 mm, while the mean femoral joint line proximalized by 0.8 mm. HKAA changed from 8.4° varus preoperatively to 3.6° varus postoperatively. LDFA changed from 89.0° to 86.7°. MPTA changed from 85.6° to 86.6°. Preoperative HKAA showed a strong correlation with postoperative HKAA (p < 0.001), and preoperative MPTA showed a positive correlation with postoperative HKAA (p < 0.001). While preoperative LDFA had a negative correlation with postoperative HKAA (p < 0.001). The femoral joint line change and LDFA change had a significant correlation with HKAA change (p < 0.05). CONCLUSION: The change of joint line had no correlation with postoperative HKAA in Oxford UKA. Preoperative HKAA strongly correlated with postoperative HKAA; while preoperative smaller LDFA and larger MPTA had a moderate correlation with postoperative HKAA. The femoral joint line change and LDFA change had a weak to moderate correlation with HKAA change.

Extracorporeal Shockwave Therapy for Greater Trochanteric Pain Syndrome: A Systematic Review with Meta-Analysis of Randomized Clinical Trials.

BACKGROUND: Greater trochanteric pain syndrome (GTPS) affects 17.6% of adults aged 50 to 79 years, particularly women. While exercise therapy and corticosteroid injections (CSIs) are common treatments, their limitations include inadequate pain control and potential tendon weakening. Extracorporeal shockwave therapy (ESWT) is an emerging alternative for GTPS. This systematic review assessed ESWT's efficacy in GTPS by evaluating pain and functional outcomes at different follow-up intervals. METHODS: A literature search of PubMed, Embase, and Web of Science for randomized clinical trials (RCTs) was conducted comparing ESWT with other GTPS treatments up to March 1, 2024. Two reviewers independently extracted data, assessing study quality using the Cochrane risk-of-bias tool. A random-effects pairwise meta-analysis compared ESWT with other treatments. RESULTS: Eight RCTs involving 754 patients (169 male, 585 female patients) were included. Seven RCTs were deemed high risk of bias, and 1 RCT had some concerns. Five RCTs investigated focused on focused ESWT, and 3 examined radial ESWT. ESWT provided significantly lower pain scores than other treatments at 2 to 4 months (standardized mean difference = -0.431; 95% confidence interval [CI], -0.82 to -0.039; I2 = 83%). Functional improvement (Lower Extremity Functional Scale) was significantly higher at 6 months (weighted mean difference = 6.68; 95% CI, 3.11-10.25; I2 = 0%) but did not exceed the minimal clinically important difference. Focused ESWT provided greater pain reduction than radial ESWT. CONCLUSION: Three weekly ESWT sessions offer short-term pain relief at 2 to 4 months for patients with GTPS, especially with focused ESWT. Functional improvements at 6 months were notable but not clinically significant. These findings suggest ESWT may complement or serve as an alternative to CSIs and exercise. However, caution is needed when interpreting these results due to high risk of bias with the included RCTs and heterogeneity across the studies. Further high-quality trials are needed to confirm ESWT's long-term benefits over other treatments. LEVEL OF EVIDENCE: Level II. See Instructions for Authors for a complete description of levels of evidence.

Biomechanical characteristic differences of two new types of intramedullary nail devices in the treatment of comminuted intertrochanteric fractures of femur: a comparative study based on finite element analysis.

OBJECTIVE: Given the recent application of two new types of intramedullary nail devices in the treatment of comminuted femoral intertrochanteric fractures (CFIFs), there is still a lack of deep understanding and comparative evaluation of their biomechanical properties. Therefore, this study aims to systematically compare the advantages and disadvantages of these two new devices with traditional proximal femoral nail antirotation (PFNA) and InterTan nails in the fixation of CFIFs through finite element analysis. METHODS: Based on the validated finite element model, this study constructed an accurate CFIFs model. In this model, PFNA, InterTan nails, proximal femoral bionic nails (PFBN), and new intramedullary systems (NIS) were implanted, totaling four groups of finite element models. Each group of models was subjected to simulation tests under a vertical load of 2100 N to evaluate the displacement and Von Mises stress (VMS) distribution of the femur and intramedullary nail devices. RESULTS: Under a vertical load of 2100 N, a comparative analysis of the four finite element models showed that the NIS device exhibited the most superior performance in terms of peak displacement, while the PFNA device performed relatively poorly. Although the NIS device had the highest peak stress in the femur, it had the smallest peak displacement of both the femur and intramedullary nail devices, and the peak stress was mainly concentrated on the lateral side of the femur, with significantly lower stress in the proximal femur compared to the other three intramedullary nail devices. In contrast, the PFBN device had the lowest peak stress in the femur, and its peak displacement of both the femur and intramedullary nail devices was also less than that of PFNA and InterTan nails. CONCLUSION: This study demonstrates that in the treatment of CFIFs, PFBN and NIS devices exhibit superior biomechanical performance compared to traditional PFNA and InterTan nail devices. Especially the NIS device, which can achieve good biomechanical results when fixing femoral intertrochanteric fractures with missing medial wall. Therefore, both PFBN and NIS devices can be considered reliable closed reduction and internal fixation techniques for the treatment of CFIFs, with potential clinical application value.

Effect of bisphosphonate on bone microstructure, mechanical strength in osteoporotic rats by ovariectomy.

BACKGROUND: Bisphosphonate (BP) can treat osteoporosis and prevent osteoporotic fractures in clinical. However, the effect of BP on microstructure and mechanical properties of cortical and trabecular bone has been taken little attention, separately. METHODS: In this study, BP was used to intervene in ovariectomized female SD rats. The femoral micro-CT images were used to measure the structural parameters and reconstruct the 3D models in volume of interest. The structural parameters of cortical and trabecular bone were measured, and the mechanical properties were predicted using micro-finite element analysis. RESULTS: There was almost no significant difference in the morphological structure parameters and mechanical properties of cortical bone between normal, ovariectomized (sham-OVX) and BP intervention groups. However, BP could significantly improve bone volume fraction (BV/TV) and trabecular separation (Tb.SP) in inter-femoral condyles (IT) (sham-OVX vs. BP, p < 0.001), and had no significant effect on BV/TV in medial and lateral femoral condyles (MT, LT). Similarly, BPs could significantly affect the effective modulus in IT (sham-OVX vs. BP, p < 0.001), and had no significant difference in MT and LT. In addition, the structural parameters and effective modulus showed a good linear correlation. CONCLUSION: In a short time, the effects of BP intervention and osteoporosis on cortical bone were not obvious. The effects of BP on trabecular bone in non-main weight-bearing area (IT) were valuable, while for osteoporosis, the main weight-bearing area (MT, LT) may improve the structural quality and mechanical strength of trabecular bone through exercise compensation.

The vastus medialis oblique compensates in current patellar dislocation patients with the increased femoral anteversion.

PURPOSE: The purpose of this study was to investigate whether the vastus medialis oblique (VMO) muscle compensates in patellar dislocation (PD) patients with the increased femoral anteversion angle (FAA). METHODS: Between 2021 and 2024, we included 60 patients with recurrent PD (RPD group). Inclusion criteria were at least two episodes of PD, as well as complete CT scans of the knee and hip. Exclusion criteria included traumatic or habitual dislocation, previous knee surgery, etc. Of these patients, 30 with excessive FAA (≥ 30°) were assigned to the A group, and 30 without excessive FAA (< 30°) to the B group. A control group of 120 patients without patellofemoral disorders was also included (C group). The cross-sectional areas of the VMO and vastus lateralis muscle (VLM) were measured 20 mm above the patella on CT scans, and the VMO/VLM area ratio was calculated. The correlation between FAA and the VMO/VLM ratio was analyzed. RESULTS: The RPD group had a significantly larger FAA (15.0 ± 1.9° vs. 30.1 ± 9.6°, P = 0.040) and a smaller VMO/VLM ratio (4.2 ± 1.5 vs. 3.5 ± 1.0, P = 0.014) compared to the C group. Within the RPD group, the A group had a higher VMO/VLM ratio than the B group (4.0 ± 1.1 vs. 3.0 ± 0.7, P = 0.029). The B group's VMO/VLM ratio was lower than that of the C group (3.0 ± 0.7 vs. 4.2 ± 1.5, P = 0.004). However, there was no significant difference in the VMO/VLM ratio between the A group and the C group. The VMO/VLM ratio showed a moderate positive correlation with FAA in the RPD group, with a correlation coefficient of r = 0.4 (P = 0.012), indicating a statistically significant relationship between the two. CONCLUSION: Patients with recurrent PD showed a smaller VMO/VLM ratio compared to controls. Increased FAA was correlated with compensatory thickening of the VMO and a higher VMO/VLM ratio in PD patients. This suggests that increased FAA may drive biomechanical adaptations in the quadriceps, stabilizing the patella. Clinicians should consider changes in FAA when assessing and treating PD. LEVEL OF EVIDENCE: Level III.

Vascularized Femoral Myo-Periosteal Graft for Congenital Pseudarthrosis of the Tibia: A Case Report.

Pure vascularized periosteal transplants have been shown to be extremely effective at achieving rapid bone healing in children with biologically complex non-union. Free tibial and fibular periosteal transplants are generally indicated when large periosteal flaps are necessary. We report using a vascularized femoral myo-periosteal graft (VFMPG) to treat distal tibial osteotomy non-union in a six-year-old boy with congenital pseudarthrosis of the tibia. The graft consisted of a 9 cm myo-periosteal flap (after 50% of elastic retraction) that incorporated the vastus intermedius muscle and diaphyseal femoral periosteum nourished by the descending branch of the lateral circumflex femoral vessels. Plantaris medialis was used as a recipient vessel. Healing occurred 10 weeks after surgery. The patient resumed gait and sports activity without orthosis. No donor or recipient site complications occurred 17 months after surgery. Employing a VFMPG might be an alternative to other free or large vascularized periosteal flaps currently in use for complex pediatric non-unions.

[Total hip arthroplasty with supracondylar shortening osteotomy in Crowe 4 inveterate hip dislocation: case report and surgical technique]. / Artroplastía total de cadera con osteotomía de acortamiento supracondílea en luxación inveterada de cadera Crowe 4: caso clínico y técnica quirúrgica.

Structural deformities of the acetabulum secondary to developmental dysplasia of the hip (DDH) are one of the most common causes requiring total hip arthroplasty (THA), whether in conjunction with femoral osteotomy in cases of Crowe dislocation 4. Several techniques have been described, studied, and compared, but there is no superiority of one technique over another. Currently, most hip surgeons perform a subtrochanteric osteotomy. With a follow-up of 10 years, good results have been obtained, so there is a need to present a therapeutic alternative with potential benefits, mainly in restoring the center of rotation of the hip, preserving the proximal bone component, and reducing complications. Therefore, this study aims to describe the surgical technique of CTA in conjunction with supracondylar shortening osteotomy in a 29-year-old female patient, using an uncemented acetabular cup, a short uncemented stem with ceramic-polyethylene bearing, and distal fixation with a 4-hole plate LC-LCP, with the goal of restoring the natural biomechanics of the hip.

Las deformidades estructurales del acetábulo como secuelas de displasia en el desarrollo de la cadera es una de las patologías más frecuentes que ameritan como tratamiento la cirugía de artroplastía total de cadera (ATC) asociada o no a osteotomía femoral en casos de luxación inveterada clasificada como Crowe 4. Múltiples técnicas han sido descritas, estudiadas y comparadas; sin embargo, no existe superioridad de una sobre otra. Actualmente, la osteotomía realizada por la mayoría de los cirujanos de cadera es subtrocantérica, se han reportado buenos resultados a 10 años de seguimiento. La necesidad de presentar una alternativa terapéutica con posibles beneficios, principalmente en la restitución del centro de rotación de la cadera, preservación de componente óseo proximal y disminución de las complicaciones, es meritoria en el campo quirúrgico. Por lo tanto, este estudio se propone describir la técnica quirúrgica de ATC asociada a osteotomía de acortamiento supracondílea en un paciente femenino de 29 años, con uso de copa acetabular no cementada, vástago corto no cementado con par de fricción cerámica-polietileno y fijación distal con placa LC-LCP de cuatro orificios, con el objetivo de restaurar la biomecánica natural de la cadera.

Parental feeding in the dinosaur Lufengosaurus revealed through multidisciplinary comparisons with altricial and precocious birds.

Previous studies arguing for parental care in dinosaurs have been primarily based on fossil accumulations of adults and hatchlings, perinatal and post-hatchlings in nests and nest areas, and evidence of brooding, the majority of which date to the Late Cretaceous. Similarly, the general body proportions of preserved embryonic skeletons of the much older Early Jurassic Massospondylus have been used to suggest that hatchlings were unable to forage for themselves. Here, we approach the question of parental care in dinosaurs by using a combined morphological, chemical, and biomechanical approach to compare early embryonic and hatchling bones of the Early Jurassic sauropodomorph Lufengosaurus with those of extant avian taxa with known levels of parental care. We compare femora, the main weight-bearing limb bone, at various embryonic and post-embryonic stages in a precocious and an altricial extant avian dinosaur with those of embryonic and hatchling Lufengosaurus, and find that the rate and degree of bone development in Lufengosaurus is closer to that of the highly altricial Columba (pigeon) than the precocious Gallus (chicken), providing strong support for the hypothesis that Lufengosaurus was fully altricial. We suggest that the limb bones of Lufengosaurus hatchlings were not strong enough to forage for themselves and would likely need parental feeding.

Three-dimensional printed calcium phosphate scaffolds emulate bone microstructure to promote bone regrowth and repair.

The interconnected structures in a 3D scaffold allows the movement of cells and nutrients. Therefore, this study aimed to investigate the in-vivo bioactivity of 3D-printed ß-tricalcium phosphate (ß-TCP) and hydroxyapatite (HAP) scaffolds that replicate biological bone. This study included 24-week-old male New Zealand white rabbits. A cylindrical bone defect with a diameter of 4.5 mm and a depth of 8 mm was created in the lateral aspect of the distal femur. A 3D-printed scaffold was implanted in the right femur (experimental side), whereas the left femur was kept free of implantation (control side). Micro-CT analysis and histological observations of the bone defect site were conducted at 4, 8, and 12 weeks postoperatively to track the bone repair progress. No evidence of new bone tissue formation was found in the medullary cavity of the bone defect on the control side. In contrast, on the experimental side, the 3D scaffold demonstrated sufficient bioactivity, leading to the growth of new bone tissue. Over time, new bone tissue gradually extended from the periphery toward the center, a phenomenon evident in both micro-CT images and biopsy staining. In the current study, we observed that the cells involved in bone metabolism adhered, spread, and proliferated on our newly designed 3D-printed scaffold with a bone microstructure. Therefore, it is suggested that this scaffold has sufficient bioactivity to induce new bone formation and could be expected to be a more useful artificial bone than the existing version.

Comparison of the deformity reduction device (DRD) mini and the Slocum jig in the precision of torsional correction during distal femoral osteotomies in small to medium breed dogs.

Previous studies have compared the use of the Slocum- jig to the deformity reduction device (DRD) jig for the correction of distal femoral deformities of varying degrees in the frontal plane. The objective of the current study is to further investigate the use of the mini DRD jig in comparison to the Slocum jig for correction of varying degrees of torsional deformities of the distal femur. Femoral models (n = 60) were developed based on a CT scan of an approximately 16.5 kg normal canine femur. Models were created with a standard varus deformity of 15 degrees, and external torsional deformities of 15, 20, or 30 degrees. Using center of rotation of angulation (CORA) methodology, corrective osteotomies were planned and performed on each of the 3D printed models based on the group assigned. Modeling clay was applied the proximal femur to mimic visualization of a routine lateral surgical approach, while retaining the ability to palpate surgical landmarks. Post-correction anatomic lateral distal femoral angle (aLDFA) and femoral torsion angle (FTA) were measured and recorded. The mean post-correction FTA of groups using the DRD jig for correction were consistently closer to the ideal value compared to those using the Slocum jig, although these differences were not always statistically significant. Correction of external torsion between the DRD jig and the Slocum jig was significantly different in groups 1 and 2 (P = 0.026 and P = 0.046), but not in group 3. For the correction of varus deformity, no significant difference was found between the two jig types in any group. Results of this study suggest jig selection during distal femoral osteotomy for correction of torsional deformity may result in varying precision of post-correction alignment. Clinical significance of this variance remains unclear, and intra-operative visual assessment of alignment should be implemented to guide corrections.

The significance of guiding anterior cruciate ligament revision: a modified femoral tunnel classification.

BACKGROUND: The positioning error of femoral tunnel was the key factor leading to the failure of anterior cruciate ligament (ACL) reconstruction. This study aimed to propose a new femoral tunnel classification to guide revision ACL reconstruction. METHODS: Totals of 150 patients with ACL reconstruction failure from 2017 to 2023 were enrolled in this retrospective study. According to the tunnel diameter, shape, posterior wall and the positioning relationship with the Lateral Intercondylar Ridge on the three-dimensional CT imaging, we divided the femoral tunnels into four types: Type I off-target type, Type II straddled type, Type III anatomical type, and Type IV irregular type. Finally, explored the inter-observer reliability within two groups of doctors (Group A, 12 high seniorities; Group B, 12 low seniorities), and evaluated the intra-observer reliability within 6 doctors after two months. Clinical evaluation was performed using the Lysholm score, Tenger activity score, Pivot Shift and anterior knee laxity measurements. RESULTS: Among 150 cases of femoral tunnel three-dimensional CT reconstructed imaging, 144 cases were successfully included in the classification system, and 6 cases were confirmed as uncertain type. We measured the Kappa (κ) coefficient of group A was significantly higher than that of group B (κ 0.72 VS 0.68), and the κ coefficient of group A was still higher than group B (κ 0.69 VS 0.62) after further dividing Type III anatomical type into three subtypes. In addition, the κ coefficients of intra-observer reliability were all exceeded 0.73. Clinical follow-up showed that 9 patients had good knee joint motor function and stability after operation. CONCLUSION: The new femoral tunnel classification was reliable and had clinical guiding significance based on three-dimensional CT imaging. LEVEL OF EVIDENCE: Level III.

Enhancing total knee arthroplasty outcomes: the role of individualized femoral sagittal alignment in robotic-assisted surgery - A randomized controlled trial.

BACKGROUND: Optimal sagittal alignment of the femoral prosthesis is critical to the success of total knee arthroplasty (TKA). While robotic-assisted TKA can improve alignment accuracy, the efficacy of default femoral alignment versus individualized alignment remains under scrutiny. This study aimed to compare the differences in prosthetic alignment, anatomical restoration, and clinical outcomes between individualized femoral sagittal alignment and default sagittal alignment in robotic-assisted TKA. METHODS: In a prospective randomised controlled trial, 113 patients (120 knees) underwent robotic-assisted TKA were divided into two groups: 61 with individualized femoral flexion (individualized alignment group) and 59 with default 3-5° flexion (default alignment group). The individualized alignment was based on the distal femoral sagittal anteverted angle (DFSAA), defined as the angle between the mechanical and distal anatomical axes of the femur. The radiographic and clinical outcomes were compared. RESULTS: Despite similar postoperative femoral flexion angles between groups (P = 0.748), the individualized alignment group exhibited significantly lower incidences of femoral prosthesis extension and higher rates of optimal 0-3° prosthesis flexion (9.8% vs. 27.1%, P = 0.014,78.7% vs. 55.9%, p = 0.008, respectively). The individualized alignment group also demonstrated more favourable changes in sagittal anatomy, with higher maintenance of postoperative anterior femoral offset within 1 mm (54.1% vs. 33.9%, P = 0.026) and posterior condylar offset within 1 mm and 2 mm (44.3% vs. 25.4%, p = 0.031,73.8% vs. 50.8%, p = 0.010, respectively). Although slight improvement in the Hospital for Special Surgery Knee Score (HSS) at three months was observed (P = 0.045), it did not reach a minimal clinically important difference. CONCLUSION: Individualized tailoring of femoral sagittal alignment in robotic-assisted total knee arthroplasty (TKA) enhances prosthetic alignment and anatomical restoration, suggesting potential improvements in postoperative outcomes.

Neglected errors in ligament reconstruction surgery may increase graft-tunnel mismatch: A biomechanical study.

Tunnel widening is a frequent problem following arthroscopic ligament reconstruction surgery that may primarily arise from a graft-tunnel mismatch caused by errors in surgical instruments and methods. The present study aimed to observe the influence of current surgical instruments and methods on graft-tunnel matching. We established an in vitro model using porcine Achilles tendons and tibias, and compared traditional surgical instruments (control group) with custom instruments (experimental group). Graft measurements, bone-tunnel creation, and measurements of the maximum pullout force of the graft from the bone tunnel were performed. Results indicated that the measuring gauge developed by our research group (capable of accurate measurement of graft diameters) may mitigate errors arising from graft-diameter measurement using traditional measuring cylinders. Therefore, errors caused by current surgical instruments and surgical methods led to an increase in graft-tunnel mismatches. The degree of mismatch was greater at the tibial end than at the femoral end.

Skull-femoral traction followed by osteotomy correction is a safe and effective treatment for severe scoliosis with split cord malformation.

OBJECTIVE: This study aimed to evaluate the safety and efficacy of skull-femoral traction followed by osteotomy correction in patients with severe spinal scoliosis and split cord malformation. METHODS: We retrospectively analyzed ten cases of severe spinal scoliosis with Pang I type split cord malformation treated between August 2012 and August 2023. Patients underwent skull-femoral traction prior to osteotomy correction. We assessed changes in height, weight, coronal and sagittal Cobb's angles, and physiological indicators such as vital capacity (VC), forced vital capacity (FVC), forced expiratory volume in one second (FEV1), and blood gas levels before, during, and after treatment. RESULTS: Traction duration ranged from 9 to 19 days, with height and weight showing significant increases post-treatment. The coronal Cobb's angle improved from pre-treatment to post-corrective surgery and remained stable at the final follow-up. Similar improvements were observed in the sagittal plane. Physiological indicators such as VC, FVC, and FEV1, as well as blood gas levels, normalized after treatment. Nutritional status, indicated by triceps skinfold thickness, albumin, and transferrin concentrations, also improved. No neurological complications or device-related complications occurred during or after treatment. CONCLUSION: Skull-femoral traction followed by osteotomy correction is a safe and effective treatment for severe spinal scoliosis with split cord malformation, offering an alternative to high-risk procedures.