Correlation of Fracture Resistance of Dental Implants and Bite Force in Dogs described in the literature: An In Vitro Study.

Dental implants are not routinely used for rehabilitation in veterinary dentistry. For some veterinarians, further studies are necessary to be considered for clinical use in animals. The objective of the present in vitro study was to evaluate static fatigue of dental implants and to correlate that with the bite strength of dogs described in the literature. Sixty implants and abutments were used with the smallest diameter of each brand of implant utilized in the study. Three groups (n = 20) were created on the basis of the implant diameter, all with external hex connector: 3.30 mm (group 1), 4.0 mm (group 2) and 5.0 mm (group 3). All groups were subjected to quasi-static loading at 30° to the implant's long axis in a universal machine (model AME-5 kN). The mean fracture strength for group 1 was 964 ± 187 N, for group 2 was 1618 ± 149 N and for group 3 was 2595 ± 161 N. Significant differences between the groups with respect to resistance after the load applications were observed (P < .05). The diameter of implants affects the resistance to external forces during the application of non-axial strength (off-axis loading) and must be considered during the planning of rehabilitation to avoid problems.

Effect of preparation surface area on the clinical outcome of full veneer crowns in dogs.

Crown therapy is commonly used in veterinary medicine to provide support to teeth which have previously fractured, received root canal therapy, have significant wear, or experienced other detrimental removal of tooth substance. As with several aspects of veterinary medicine, many of the recommendations or guidelines for crown therapy originate from human dentistry, which are then transferred to veterinary patients. Due to the significant difference in the anatomy of teeth and function of the oral cavity between humans and dogs, these guidelines need to be studied to determine the appropriateness of their use in veterinary patients. This article evaluates the relationship between surface area of the preparation and clinical outcome of full veneer crown therapy of the canine tooth in dogs. Although there appeared to be a positive relationship between preparations with greater surface area and successful clinical outcome, it was not found to be statistically significant.

Crown preparation design: an evidence-based review.

Evidence-based clinical guidelines for full metal crown preparation design are seldom encountered in the veterinary literature. The veterinary literature regarding prosthodontic treatment in companion animals is sparse and consists primarily of case reports and expert opinion based primarily on clinical experience. The goal of this manuscript is to present concepts of evidence-based practice, review common recommendations on crown preparation design from the veterinary literature, and to provide an assessment of the evidence for or against those recommendations.

Achievable convergence angle and the effect of preparation design on the clinical outcome of full veneer crowns in dogs.

It is widely accepted that the convergence angle of a full veneer crown preparation should be as close to parallel as possible to attain adequate retention/resistance. The shape of the dog's canine tooth limits the veterinary dentists' ability to achieve the recommended convergence angle. However, the clinically achievable convergence angle of the canine tooth in dogs has not been evaluated. In addition, the convergence angle and other physical properties of a preparation, such as height and base diameter, have been shown to affect the retention/resistance of full veneer crowns, in vitro. This effect has not been evaluated clinically in the dog. Physical properties of 32 stone dies from full veneer crowns of canine teeth were studied to evaluate the clinically achievable convergence angle and the potential effect physical properties of the preparation had on the clinical outcome of the restoration. The clinically achievable convergence angle was much higher than the current recommendation. There was an association, albeit not statistically significant, between physical properties of a preparation (convergence angle, height, base diameter) and the clinical outcome of the restoration.

[Adhesively cemented full-cast metal crowns on traumatized canine teeth in working dogs]. / Resultaten van adhesief gecementeerde metalen kronen op getrau- matiseerde hoektanden bij werkhonden.

In this retrospective study, 58 metal crowns were placed in 35 guard dogs with fractured or severely worn canines. All animals could resume their work after treatment. Only three metal crowns came off (5%) and two metal crowns were lost for unknown reasons. At a later stage, six canine teeth (100%) broke off underneath the crown during dog training. The success rate of this procedure in our clinic was therefore 81% (47/58). A significant correlation was found between the height of the tooth stump and the loss of the crown. Recommendations for further research were made.