Eco-friendly shrink-resist finishing of wool through synergistic effect of disulfide bond reducing agent and papain.

The environmental benefits of utilizing protease as a biocatalyst for wool shrink-resist finishing have been widely recognized. However, the efficacy of individual protease treatment is unsatisfactory due to its incapability towards the outermost cuticle layer of wool fibers that contains hydrophobic fatty acids. In order to weaken the structural integrity of the highly cross-linked scales and promote the enzymatic anti-felting, sodium sulfite and tris (2-carboxyethyl) phosphine hydrochloride (TCEP) were employed in combination with papain, respectively, aiming at obtaining a low shrinkage without unacceptable fiber damages. Based on the synergistic effect of papain and TCEP, the edges of wool scales were slightly destroyed by the reduction of disulfide bonds, accompanied by enzymatic hydrolysis of the keratin component. Through the controlled reduction and hydrolysis of wool scales, satisfactory anti-felting result was achieved without causing severe damage to the fiber interiors. In the presence of 0.25 g/L TCEP and 25 U/mL papain, the area shrinkage of wool fabric decreased to approximately 6 %, with a low strength loss of less than 8 %. Meanwhile, the dyeing behavior of the wool fabric under low-temperature conditions was dramatically improved, leading to decreased energy consumption during production. The present work provides an alternative for eco-friendly finishing of wool fabrics, which can be applied commercially.

Ovine KRT81 Variants and Their Influence on Selected Wool Traits of Commercial Value.

Keratins are the main structural protein components of wool fibres, and variation in them and their genes (KRTs) is thought to influence wool structure and characteristics. The PCR-single strand conformation polymorphism technique has been used previously to investigate genetic variation in selected coding and intron regions of the type II sheep keratin gene KRT81, but no variation was identified. In this study, we used the same technique to explore the 5' untranslated region of KRT81 and detected three sequence variants (A, B and C) that contain four single nucleotide polymorphisms. Among the 389 Merino × Southdown cross sheep investigated, variant B was linked to a reduction in clean fleece weight, while C was associated with an increase in both greasy fleece weight and clean fleece weight. No discernible effects on staple length or mean-fibre-diameter-related traits were observed. These findings suggest that variation in ovine KRT81 might influence wool growth by changing the density of wool follicles in the skin, the density of individual fibres, or the area of the skin producing fibre, as opposed to changing the rate of extrusion of fibres or their diameter.

Genomic Characterization of Quality Wool Traits in Spanish Merino Sheep.

The native Spanish Merino breed was the founder of all the other Merino and Merino-derived breeds worldwide. Despite the fact that this breed was created and improved to produce the highest quality fine wool, the global wool market crisis led to the wholescale crossing of most of the herds with breeds for meat purposes. Nevertheless, there are still some purebred animals with a high potential for producing quality wool. The objective of this study was to characterize the current wool quality of the breed and identify genes associated with these parameters. To achieve this, over 12,800 records from the most representative animals of the breed (registered in the herd book) were analyzed using the Australian OFDA 2000 system, for parameters such as fiber diameter (FD), standard deviation (SD), coefficient of variation (CV), fibers over 15 microns (>15%), staple length (SL), and comfort factor (CRV). Additionally, animals with the most extreme FD values were whole-genome sequenced using NGS. Genome-wide association studies (GWAS) determined the association of 74 variants with the different traits studied, which were located in 70 different genes. Of these genes, EDN2, COL18A1, and LRP1B, associated with fibers over 15%, and FGF12 and ADAM17, associated with SL, play a key role in hair follicle growth and development. Our study reveals the great potential for recovering this breed for fine wool production, and identifies five candidate genes whose understanding may aid in that selection process.

Rapid aggregation of amyloid-like protein enhanced by mTGase to prepare functional wool fabrics for efficient and sustainable remove heavy metals from wastewater.

To counteract the increasing severity of water pollution and purify water sources, wastewater treatment materials are essential. In particular, it is necessary to improve the bonding strength between the adsorption material and the substrate in a long-term humid environment, and resist the invasion of microorganisms to prolong the service life. In this study, an amyloid-like aggregation method of lysozyme catalyzed by microbial transglutaminase (mTGase). Lysozyme self-assembles into an amyloid-like phase-transited lysozyme (PTL) in the presence of a reducing agent. Simultaneously, mTGase catalyzes acyl transfer reactions within lysozyme molecules or between lysozyme and keratin molecules, and driving PTL assembly on the wool fiber (TG-PTL@wool). This process enhances the grafting amount and fastness of PTL on the wool. Moreover, the tensile strength of wool fabric increased to 523 N. TG-PTL@wool achieves a 97.32 % removal rate of heavy metals, maintaining a removal rate of over 95 % after 5 cycles. TG-PTL@wool has excellent antibacterial property (99 %), and it remains above 90 % after 50 times of circulating washing. This study proved that mTGase can enhance the amyloid aggregation of lysozyme and enhance the bonding strength between PTL coating and substrate. Moreover, TG-PTL@wool provides a sustainable, efficient and cleaner solution for removing heavy metals from water.

Synthesis of grafted bromoisobutyryl esterified starch using electron transfer atom transfer radical polymerization method with high-performance adhesion and film properties.

Nowadays, few investigations on the process parameters of grafted starch synthesized using electron transfer atom transfer radical polymerization (ARGET ATRP) and its applications in warp sizing and paper-making are presented. Therefore, this study aimed to survey the appropriate process parameters of bromoisobutyryl esterified starch-g-poly(acrylic acid) (BBES-g-PAA) synthesized by the ARGET ATRP, and also aimed to provide a new biobased BBES-g-PAA adhesive. The appropriate synthesis process parameters were 1.2, 0.32, and 0.6 in the molar ratios of vitamin C, CuBr2, and pentamethyldivinyltriamine to BBES, respectively, at 40 °C for 5 h. The BBES-g-PAA samples with a grafting ratio range of 4.63-14.14 % exhibited bonding forces of 57.8-64.6 N to wool fibers [55.5 N (BBES) and 53.8 N (ATS)], and their films showed breaking elongations of 3.29-3.80 % [2.74 % (BBES) and 2.49 % (ATS)] and tensile strengths of 29.1-25.4 MPa [30.4 MPa (BBES) and 34.7 MPa (ATS)]. Compared with BBES, significantly increased bonding forces and film elongations, and decreased film strengths for the BBES-g-PAA samples with grafting ratios ≥10.54 % were displayed (p < 0.05). The time (100-42 s) taken for the BBES-g-PAA films was significantly shorter than that of ATS (246 s) and BBES (196 s) films (p < 0.05), corresponding to better desizability.

Molecular insights into Pashmina fiber production: comparative skin transcriptomic analysis of Changthangi goats and sheep.

Ladakh, one of the highest inhabited regions globally, hosts the unique Changthangi goat, renowned for producing Pashmina, the world's most luxurious natural fiber. In comparison, the fiber derived from Changthangi sheep is considered next only to Pashmina. This research endeavors to compare the skin transcriptome profiles of Changthangi goats and Changthangi sheep, aiming to discern the molecular determinants behind the recognition of Changthangi goats as the source of Pashmina. Drawing upon previously conducted studies, a collective of 225 genes correlated with fiber characteristics were extracted from the differentially expressed genes noticed between the two species (p-value of ≤ 0.05 and a log2 fold change of ≥ 1.5). These genes were analyzed using DAVID software to understand their biological functions and to identify enriched KEGG and Reactome pathways. The protein-protein interaction networks were constructed using Cytoscape, cytoHubba, and STRING to focus on key genes and infer their biological significance. Comparative transcriptome analysis revealed significantly higher expression of genes involved in signaling pathways like Wnt, MAPK, PI3K-Akt, Hedgehog, associated with fiber development and quality in Changthangi goats. These pathways play crucial roles in hair follicle (HF) formation, maintenance of epidermal stem cells, and fiber characteristics. Findings also highlight the enrichment of cell adhesion molecules and ECM-receptor interaction, emphasizing their roles in HF structure, growth, and signaling. This investigation offers an in-depth understanding of the molecular intricacies governing Pashmina production in Changthangi goats, providing valuable insights into their unique genetic makeup and underlying mechanisms influencing the exceptional quality of Pashmina fibers.

Suitability of dyes from cinnamon bark on wool fibers using metal and bio-mordants.

Growing concern about the environmental effects of metal mordants and synthetic dyes is encouraging the use of bio-mordants and natural colorants. Cinnamon bark is a rich source of natural colorants such as cinnamaldehyde and tannins. The main purpose of this research was to study and compare the effect of bio-mordants versus metal mordants in terms of colorimetric parameters and color fastness properties of cinnamon bark on wool fibers. Accordingly, some bio-mordants, including date kernel, peppermint, banana peel, and artemisia, as well as some metal mordants like aluminum potassium sulphate and copper sulphate, were studied based on three conventional mordanting methods (pre-, meta-, and post-mordanting). The results indicated that the conjunction of metal mordants and polyphenolic bio-mordants with cinnamon colorants can create different hues and tones of brown. Also, the color produced by cinnamon in wool fibers has poor color fastness and low color strength. Overall, bio-mordants have presented good color properties, making the dyeing process eco-friendly and greener. Among the applied bio-mordants, peppermint has created the best color strength and color fastness.

Integration Analysis of Hair Follicle Transcriptome and Proteome Reveals the Mechanisms Regulating Wool Fiber Diameter in Angora Rabbits.

Fiber diameter is an important characteristic that determines the quality and economic value of rabbit wool. This study aimed to investigate the genetic determinants of wool fiber diameter through an integration analysis using transcriptomic and proteomic datasets from hair follicles of coarse and fine wool from Angora rabbits. Using a 4D label-free technique, we identified 423 differentially expressed proteins (DEPs) in hair follicles of coarse and fine wool in Angora rabbits. Eighteen DEPs were examined using parallel reaction monitoring, which verified the reliability of our proteomic data. Functional enrichment analysis revealed that a set of biological processes and signaling pathways related to wool growth and hair diameter were strongly enriched by DEPs with fold changes greater than two, such as keratinocyte differentiation, skin development, epidermal and epithelial cell differentiation, epidermis and epithelium development, keratinization, and estrogen signaling pathway. Association analysis and protein-protein interaction network analysis further showed that the keratin (KRT) family members, including KRT77, KRT82, KRT72, KRT32, and KRT10, as well as CASP14 and CDSN, might be key factors contributing to differences in fiber diameter. Our results identified DEPs in hair follicles of coarse and fine wool and promoted understanding of the molecular mechanisms underlying wool fiber diameter variation among Angora rabbits.

Resource utilization in the sub-sectors of the textile industry: opportunities for sustainability.

It was aimed to determine the specific resource use and reduction potential profiles in various textile sub-sectors (cotton woven fabric dyeing-finishing, wool woven fabric dyeing-finishing, synthetic woven fabric dyeing-finishing, cotton knitted fabric, synthetic knit fabric dyeing-finishing, non-woven fabric, dyeing-finishing of knitted fabric). The main focus was to elucidate opportunities for sustainability in terms of decreasing resource utilization in the textile sector. On-site surveys and detailed data collection studies were carried out at 150 textile facilities. Average specific values for water, auxiliary chemicals, dyestuff, electricity, and steam consumptions, and related reduction potentials were calculated and compared within facilities and sub-sectors. The minimum specific resource consumption values reported in the Best Available Techniques Reference Document (BREF) for the textile industry and data of similar facilities from the literature were evaluated and used. A detailed environmental performance profile of the Turkish textile sector in terms of resource usage and reduction potential was generated. The highest specific water consumption was found in the wool-woven fabric sub-sector (345 ± 262 L/kg product). Although the specific auxiliary chemical consumption shows similarities within sub-sectors, the highest specific auxiliary chemical consumption (397 ± 237 g/kg product) was found in the synthetic woven fabric sub-sector. The sub-sector with the highest specific dyestuff consumption (30 ± 13 g/kg product) was the cotton knitted fabric sub-sector. The wool woven fabric industry had the highest specific electricity (7 ± 5.3 kWh/kg product) and steam (20 ± 11 kg steam/kg product) consumption. In addition, for all the studied sub-sectors country-wide, the lowest and highest reduction potentials in resource uses were 18 ± 15% and 73 ± 13%, respectively, suggesting a need for major full-scale implementations of cleaner production for enhancing sustainability in the textile industry.

Dissolution behavior of stone wool fibers in synthetic lung fluids: Impact of iron oxidation state changes induced by heat treatment for binder removal.

Stone wool fiber materials are commonly used for thermal and acoustic insulation, horticulture and filler purposes. Biosolubility of the stone wool fiber (SWF) materials accessed through acellular in vitro dissolution tests can potentially be used in future as an indicator of fiber biopersistence in vivo. To correlate acellular in vitro studies with in vivo and epidemiological investigations, not only a robust dissolution procedure is needed, but fundamental understanding of fiber behavior during sample preparation and dissolution is required. We investigated the influence of heat treatment procedure for binder removal on the SWF iron oxidation state as well as on the SWF dissolution behavior in simulant lung fluids (with and without complexing agents). We used heat treatments at 450 °C for 5 min and 590 °C for 1 h. Both procedures resulted in complete binder removal from the SWF. Changes of iron oxidation state were moderate if binder was removed at 450 °C for 5 min, and there were no substantial changes of SWF's dissolution behavior in all investigated fluids after this heat treatment. In contrast, if binder was removed at 590 °C for 1 h, complete Fe(II) oxidation to Fe(III) was observed and significant increase of dissolution was shown in fluids without complexing agent (citrate). PHREEQC solution speciation modeling showed that in this case, released Fe(III) may form ferrihydrite precipitate in the solution. Precipitation of ferrihydrite solid phase leads to removal of iron cations from the solution, thus shifting reaction towards the dissolution products and increasing total mass loss of fiber samples. This effect is not observed for heat treated fibers if citrate is present in the fluid, because Fe(III) binds with citrate and remains mobile in the solution. Therefore, for developing the most accurate SWF in vitro acellular biosolubility test, SWF heat treatment for binder removal is not recommended in combination with dissolution testing in fluids without citrate as a complexing agent.

Spatiotemporal Expression Characterization of KRTAP6 Family Genes and Its Effect on Wool Traits.

Keratin-related proteins (KAPs) are structural components of wool fibers and are thought to play a key role in regulating the physical and mechanical properties of fibers. Among all KAP genes (KRTAPs), KRTAP6 gene family (KRTAP6-1, KRTAP6-2, KRTAP6-3, KRTAP6-4, and KRTAP6-5) is a very important member with high polymorphism and notable association with some wool traits. In this study, we used real-time fluorescence quantitative PCR (RT-qPCR) and in situ hybridization to investigate spatiotemporal expression of KRTAP6s. The results revealed that KRTAP6 family genes were significantly expressed during anagen compared to other stages (p < 0.05). And it was found the five genes were expressed predominantly in the dermal papillae, inner and outer root sheaths, and showed a distinct spatiotemporal expression pattern. Also, it was found that KRTAP6-1 and KRTAP6-5 mRNA expression was negatively correlated with wool mean fiber diameter (MFD) and mean staple strength (MSS) (p < 0.05). In summary, the KRTAP6 family genes share a similar spatiotemporal expression pattern. And KRTAP6-1 and KRTAP6-5 may regulate the MFD and MSS of Gansu Alpine fine-wool sheep wool by changing the expression.

Modification of wool fibre's structural properties as a cheap adsorbent for the elimination of Cr6+ and Rhodamine6g dye from aqueous solution.

Wool, a naturally occurring biopolymer made up of amino acids, is employed as an adsorbent for both modified and unmodified forms of the dyes rhodamine6G (R6G) and Cr6+. The two-step procedure of (i) ring opening polymerization (ROP) and (ii) condensation reaction was used to modify the structure of wool fibre. Both the ROP and the condensation provide steric free chain expanding groups as well as adsorption-improving groups. The FT-IR spectrum, which showed peaks about 1725 and 1630 cm-1 corresponding to the CO and CN stretchings, respectively, confirmed the structural modification. By detecting a slight hump at 8.5 ppm, 1H NMR was able to validate the later functional group. DSC, TGA, FE-SEM, EDX, and water contact angle (WCA) were also used to characterize it. With the aid of a UV-visible spectrophotometer, the quantitative adsorption of both Cr6+ and R6G by modified and unmodified Wool fibre was monitored. For the adsorption of Cr6+ and R6G, the pseudo first order and pseudo second order kinetics were used. The multilayer coating of adsorbate onto adsorbent was confirmed by the Langmuir adsorption isotherm. Thermodynamic parameters were calculated and compared to values found in the literature.

Fabrication, Structural Characteristics, and Properties of Sericin-Coated Wool Nonwoven Fabrics.

Recently, nonwoven fabrics from natural silk have attracted considerable attention for biomedical and cosmetic applications because of their good mechanical properties and cytocompatibility. Although these fabrics can be easily fabricated using the binding character of sericin, the high cost of silk material may restrict its industrial use in certain areas. In this study, sericin was added as a binder to a cheaper material (wool) to prepare wool-based nonwoven fabrics and investigate the effect of the amount of sericin added on the structural characteristics and properties of the wool nonwoven fabric. It was found using SEM that sericin coated the surface of wool fibers and filled the space between them. With an increase in sericin addition, the porosity, moisture regain, and the contact angle of the sericin-coated wool nonwoven fabric decreased. The maximum stress and initial Young's modulus of the nonwoven fabric increased with the increase in sericin amount up to 32.5%, and decreased with a further increase in the amount of sericin. Elongation at the end steadily decreased with the increase in sericin addition. All of the nonwoven fabrics showed good cytocompatibility, which increased with the amount of sericin added. These results indicate that sericin-coated wool-based nonwoven fabrics may be successfully prepared by adding sericin to wool fibers, and that the properties of these fabrics may be diversely controlled by altering the amount of sericin added, making them promising candidates for biomedical and cosmetic applications.

Proteome Analysis of Alpine Merino Sheep Skin Reveals New Insights into the Mechanisms Involved in Regulating Wool Fiber Diameter.

Wool fiber is a textile material that is highly valued based on its diameter, which is crucial in determining its economic value. To analyze the molecular mechanisms regulating wool fiber diameter, we used a Data-independent acquisition-based quantitative proteomics approach to analyze the skin proteome of Alpine Merino sheep with four fiber diameter ranges. From three contrasts of defined groups, we identified 275, 229, and 190 differentially expressed proteins (DEPs). Further analysis using Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathways revealed that pathways associated with cyclic adenosine monophosphate and peroxisome proliferator-activated receptor signaling are relevant to wool fiber diameter. Using the K-means method, we investigated the DEP expression patterns across wool diameter ranges. Using weighted gene co-expression network analysis, we identified seven key proteins (CIDEA, CRYM, MLX, TPST2, GPD1, GOPC, and CAMK2G) that may be involved in regulating wool fiber diameter. Our findings provide a theoretical foundation for identifying DEPs and pathways associated with wool fiber diameter in Alpine Merino sheep to enable a better understanding of the molecular mechanisms underlying the genetic regulation of wool fiber quality.

Laccase-assisted colouration of wool fabric using green tea extract for imparting antioxidant, antibacterial, and UV protection activities.

The demand for natural dyes for imparting sustainable dyeing effects to textiles is increasing. Metal mordants generate an unstainable impact in the natural dyeing of textiles. In order to avoid the toxic effect due to the use of metal mordants, the present work uses enzyme for sustainable natural dyeing of wool. The current study is aimed at preparing multifunctional wool fabric using natural dye green tea (Camellia sinensis). Laccase (an enzyme) was used to polymerise the phenolic compounds of Camellia sinensis in situ on wool. The in situ colouration of wool fabric was performed at various varying dyeing conditions (temperature, time, and concentrations) using laccase. Colouration properties (colour values and strength) were examined to estimate the appearance of dyed fabrics. The evaluation of dyed fabrics for functional properties such as antibacterial, antioxidant, and UV protection was done. The efficient functional properties viz, antibacterial activity (> 75%), antioxidant property (> 90%), and excellent UV protection, were obtained. FTIR analysis of separately prepared polymeric dye and the dyed fabric was also done to confirm the laccase-assisted polymerisation. Thus, a novel approach of enzymatic functional natural dyeing of wool was explored.

Eco-friendly microwave assisted sustainable coloration of silk and wool fabric with Acid Blue 07 dye.

Environment-friendly textile processing is the demand of the current global scenario, where the application of sustainable technologies such as microwave radiation has been gaining fame in all global fields due to their green and human-friendly nature. This study has been conducted to employ sustainable technology such as microwave (MW) rays for dyeing polyamide-based proteinous fabric using Acid Blue 07 dye. The fabric before and after MW treatment for up to 10 min has been dyed using an acid dye solution. Spectrophotometric analysis of the dye solution was performed before and after irradiation at a specific selected level. Using selected dyes and irradiation conditions, a series of 32 experiments using a central composite design has been employed. The shades made at selected conditions of irradiation and dyeing were assessed for colorfastness as per ISO standards. It was observed that for dyeing silk, 55 mL of Acid Blue 07 dye solution containing 1 g/100 mL salt solution at 65 °C for 55 min should be employed after MW treatment for 10 min. In comparison, for dyeing wool, 55 mL of Acid Blue 07 dye solution containing 2 g/100 mL salt solution at 65 °C for 55 min should be employed after MW treatment for 10 min. Physiochemical analysis shows that sustainable tool has not altered the chemical nature of fabric but has modified the fabric surface physically to enhance uptake ability. Colorfastness shows that the shades made have offered good resistance to fade and have given good to excellent ratings on the gray scale.

Highly Sensitive Fabric Sensors Based on Scale-like Wool Fiber for Multifunctional Health Monitoring.

Highly sensitive, multifunctional, and comfortable fabric sensors with splendid electrical properties for precise detection of human physiological health parameters have attractive prospects in next-generation wearable flexible devices. However, it remains a non-ignorable challenge to construct a multifunctional fabric sensor to meet the requirements of compact structure, high sensitivity, fast response, excellent stability, and air permeability. Here, a wool felt@MXene fabric sensor (WF@MFS) prepared by felting large quantities of wool coated with MXene is reported for measuring multiple physiological parameters in a noninvasive manner. With the high conductivity and outstanding mechanical properties of MXene and the special scale-like surface structure of the wool fiber, the sensor exhibits remarkable sensing performance such as high pressure sensitivity (80.79 kPa-1), fast response (40 ms), low detection limit (12 Pa), and strong stability (>12,500 cycles). Furthermore, to avoid direct contact between MXene and the human body, the WF@MFS is encapsulated in pure wool without MXene, thereby enabling the fabricated sensor to be tightly integrated into a variety of clothing for monitoring different physiological signals and information about human activities. More importantly, we develop an intelligent cushion with a square and panda pattern and an intelligent neckerchief in the form of arrays based on the WF@MFS, which can intuitively observe the real-time force distribution of the thigh and cervical spine by means of machine learning when a human body sits in different postures. The sensor proposed in this work demonstrates the great ability to prevent cardiovascular disease and the related diseases caused by improper sitting postures in advance, paving a promising path for future wearable smart fabric electronics.

Investigation of wool fiber yield and moisture regain properties of four Ethiopian sheep breeds.

Ethiopia has indigenous breeds of sheep such as Washera, Menz, Farta, and Tikur. Small-scale enterprises are using the wool fibers from these breeds to produce local products such as rugs, socks, sweaters, quilts, and mattresses. This study investigates four Ethiopian sheep breeds wool fiber yield and moisture regain properties. Four hundred total sheep, of which 50% males and 50% female sheep, were included in the study. The result revealed that the average wool fiber yield according to the IWTO CWC standard of male sheep for Washera, Menz, Farta, and Tikur were 89.29%, 88.29%, 73.33%, and 81.74%, and for female sheep were 88.75%, 81.91%, 73.23%, and 80.80%, respectively. The selected Ethiopian wool fiber yield showed higher as compared to other sheep breeds of some countries. The study also revealed that the raw wool fiber moisture regain values of Washera, Menz, Farta, and Tikur were 10.67%, 16.91%, 11.11%, and 10.71% for male sheep and 11.92%, 15.91%, 11.83%, and 9.22% for female sheep, respectively. This shows that the Ethiopian wool fiber having good fiber yield and moisture regain can be used as a source of manufacturing different wool products.

Neonatal-Onset Inflammatory Tinea Capitis by Microsporum canis Due to a Woolen Hat.

Tinea capitis is a common fungal infection in children, but it is rare in newborns. We report a case of a 3-week-old infant presenting with scalp annular erythema. She had a history of wearing a woolen hat one week before the disease onset. Wood's lamp and dermoscopic findings favoured the diagnosis of tinea capitis. Further examinations of her scalp, including direct KOH examination and fungal culture confirmed the diagnosis of tinea capitis caused by treatment with oral griseofulvin was effective. Neonatal tinea capitis is often misdiagnosed due to its rarity and atypical presentation. A thorough history (including the contacting history of clothes made of animal fur), physical examination and further mycological examinations are required for diagnosis. Griseofulvin, itraconazole and fluconazole have been reported to be effective drugs for the treatment of children tinea capitis. Liver enzymes should be regularly monitored during the period of using antifungal agents.

Variation in ovine KRTAP8-1 affects mean staple length and opacity of wool fiber.

In this study, keratin-associated proteins gene (KRTAP8-1) from five different sheep breeds and breed-crosses (n = 310) was genotyped using a Polymerase Chain Reaction-Single Strand confirmation Polymorphism (PCR-SSCP). Six unique genotypes were observed: AA, AC, AD, AE, DD and EE, with AA being the most common in the different breeds and crosses. Twelve wool characteristics: yield, mean staple length (MSL), bulk, mean fiber diameter (MFD), fiber diameter standard deviation (FDSD), coefficient of variation of fiber diameter (CVFD), medullation, standard deviation of medullation (MeSD), coefficient of variation of medullation (CVMed), opacity, standard deviation of opacity (OpSD), and coefficient of variation of opacity (CVOp) were measured on wool derived from the sheep. Variation in KRTAP8-1 was found to have strong association with MSL, OpSD and CVOp (p ≤ 0.027). The MSL of sheep of genotype AE was greater (p = 0.027) than for sheep of genotype AA. The OpSD of sheep of genotype AA was less (p = 0.017) than sheep with the AE genotype, and the CVOp of sheep with genotype AA was less (p = 0.018) than sheep with genotype AE. Further studies are required to confirm the role of variation in KRTAP8-1 in improving quality wool production.