Development and validation of single analytical HPLC method for determination of flavoxate HCl in bulk, tablets and biological fluids.

A simple, sensitive and precise high performance liquid chromatographic (HPLC) method was developed and validated for determination of flavoxate HCI in raw material, tablets and biological fluids. The method followed by using the Zorbax XDB-C18 column containing Di-isobutyl n-octadeceylsilane (4.6mm×150mm, 5µm). The mobile phase consisted of acetonitrile: methanol: 0.15M sodium perchlorate (17:35:48 v/v) having pH 3. UV detection was carried out at 229nm at 40°C. Results indicated that the method has successfully established and validated in accordance with ICH guidelines acceptance criteria for linearity (0.03-7.5µg), accuracy (101.18-101.28%), robustness of column age and column lot (peak area %CV<0.04, purity %CV< 0.006) and robustness of HPLC condition (%CV<0.02), precision (intra and inter day precision assay, %CV values for peak area and percent purity of flavoxate HCl<2%) and system suitability parameters. The average noise, theoretical LOD and LOQ were found to be 0.01 mAU, 0.03 mAU and 0.6ng, respectively. The Coefficient of determination (r2) ranging from 0.03µg to 7.5µg, 0.99 which was within acceptable criteria of r2 & gt 0.99. The spiked recoveries of samples were 101.28, 101.18 and 101.18% respectively. All data revealed that this method can be used for in-vitro & in-vivo determination of flavoxate HCI in various pharmaceutical preparations.

[Fluorescence enhancement of flavoxate hydrochloride in alkali solution and its application in pharmaceutical analysis].

Fluorescence enhancement reaction of flavoxate hydrochloride (FX) in strong alkali solution was studied, the mechanism of the reaction was investigated, and a novel fluorimetric method for analysis of FX in drug sample was established. FX has no intrinsic fluorescence, but it can slowly produce fluorescence in strong alkali solution. Heating can promote the fluorescence enhancement reaction. In 3D fluorescence spectra of the decomposition product of FX, two fluorescence peaks, located respectively at excitation wavelengths λex/ emission wavelength λem =223/410 nm, and 302/410 nm, were observed. Using quinine sulfate as a reference, fluorescence quantum yield of the decomposition product was measured to be 0.50. The structural characteriza- tion and spectral analysis of the decomposition product reveal that ester bond hydrolysis reaction of FX is firstly occurred during heating process, forming 3-methylflavone-8-carboxylic acid (MFA), then a cleavage reaction of the γ-pyrone ring of MFA occurred, producing α, ß-unsaturated ketone. This product includes adjacent hydroxyl benzoic acid group in its molecule, which can form intramolecular hydrogen bond under alkaline condition, so that increase the conjugate degree and enhance the rigidity of the molecule, and thereby cause fluorescence enhancement. Based on this fluorescence enhancement reaction, a fluorimetric method was proposed for the determination of FX. A linear calibration curve covered the concentration range 0.020 3-0.487 µg · mL. The regression equation was I(F) = 23.9 + 5357.3 c, with correlation coefficient r = 0.999 7 (n = 8), detection limit D = 1.1 ng · mL(-1). The method was applied to the analysis of FX tablets, with a spiked recovery rate of 100.2%. The reliability of the method was verified by a UV-spectrophotometric method.

Clarifying the mechanism of aggregation of particles in high-shear granulation based on their surface properties by using micro-spectroscopy.

The present study aimed to clarify, by means of micro-spectroscopy, the mechanism of aggregation of particles into granules during high-shear granulation. We used two types of pharmaceutical granules prepared by high-shear granulator, one containing mefenamic acid and the other containing flavoxate hydrochloride as poorly soluble active pharmaceutical ingredients (APIs). Lactose, cornstarch, and microcrystalline cellulose were used as excipients; and hydroxypropyl cellulose (HPC) was used as the binding agent. The distributions of components in granules were visualized by mapping cross-sections of individual granules with techniques utilizing mid-infrared spectroscopy at the SPring-8 synchrotron radiation facility and micro-Raman spectroscopy. In the distribution maps of mefenamic acid granules, distributions of mefenamic acid, cornstarch, and microcrystalline cellulose overlapped; in flavoxate hydrochloride granules, on the other hand, distributions of flavoxate hydrochloride and lactose overlapped. Assessment of the surface free energy of each component found that ingredients with overlapping distribution had similar surface properties. Therefore, it was revealed that in high-shear granulation, in addition to the granulator operating conditions and general properties of the formulation itself (such as the solubility and particle size of each ingredient), the surface properties of the ingredients and their interrelationships were also factors that determined the aggregation behavior of the particles.

Lipophilic cationic drugs increase the permeability of lysosomal membranes in a cell culture system.

Lysosomes accumulate many drugs several fold higher compared to their extracellular concentration. This mechanism is believed to be responsible for many pharmacological effects. So far, uptake and release kinetics are largely unknown and interactions between concomitantly administered drugs often provoke mutual interference. In this study, we addressed these questions in a cell culture model. The molecular mechanism for lysosomal uptake kinetics was analyzed by live cell fluorescence microscopy in SY5Y cells using four drugs (amantadine, amitriptyline, cinnarizine, flavoxate) with different physicochemical properties. Drugs with higher lipophilicity accumulated more extensively within lysosomes, whereas a higher pK(a) value was associated with a more rapid uptake. The drug-induced displacement of LysoTracker was neither caused by elevation of intra-lysosomal pH, nor by increased lysosomal volume. We extended our previously developed numerical single cell model by introducing a dynamic feedback mechanism. The empirical data were in good agreement with the results obtained from the numerical model. The experimental data and results from the numerical model lead to the conclusion that intra-lysosomal accumulation of lipophilic xenobiotics enhances lysosomal membrane permeability. Manipulation of lysosomal membrane permeability might be useful to overcome, for example, multi-drug resistance by altering subcellular drug distribution.

High-performance liquid chromatographic determination of flavoxate hydrochloride and its hydrolysis product.

Liquid chromatographic method was presented for the determination of flavoxate hydrochloride (FX) and its hydrolysis product. The method was based on high-performance liquid chromatographic (HPLC) separation of FX from its hydrolysis product on CN column using a mobile phase consisting of acetonitrile-12 mM ammonium acetate (45:55, vol/vol, pH 4.0) with UV detection at 220 nm and flow rate of 1.5 mL min(-1). The proposed HPLC method for the determination of FX was utilized to investigate the kinetics of acidic hydrolytic process at different temperatures and to calculate its activation energy. In addition, the proposed HPLC method was used for pH-rate profile study of hydrolysis of FX in Britton-Robinson buffer solutions. The 3-methylflavone-8-carboxylic acid ethyl ester, as impurity of flavoxate hydrochloride, can be separated by the proposed HPLC method.

Conformational evaluation and detailed 1H and 13C NMR assignments of flavoxate, a urinary tract antispasmodic agent.

1H and 13C NMR chemical shift assignments for the urinary tract antispasmodic flavoxate (1) and flavoxate hydrochloride (2) were obtained from one- and two-dimensional measurements. A Monte Carlo random search using molecular mechanics, followed by geometry optimization of each minimum energy structure employing DFT calculations at the B3LYP/6-31G* level, and a Boltzmann analysis of the total energies, provided accurate molecular models which describe the conformational behavior of flavoxate (1). The electron density surfaces for the global minimum and the second minimum conformers 1a and 1b of this L-type Ca2+ channel inhibitor were calculated. The presence of both conformers in solution was demonstrated in full agreement with 2D NOESY data and NOE difference spectroscopy.

Structural characterization of terflavoxate.

Data are reported on the structural characterization of 3-methyl-4-oxo-2-phenyl-4H-1-benzopyran-8-carboxylic acid 1,1-dimethyl-2-(N-piperidinyl)ethyl ester hydrochloride (terflavoxate-HCl, Rec 15/2053, CAS 86433-39-8), a new antispasmodic for the lower urinary tract. UV, IR, NMR and MS spectra fully confirmed the structure. The X-ray crystal structure determination revealed that the molecular structure consists of a rigid platform, formed by the chromone system, with two arms, the phenyl group at C(2) and the ester chain at C(8). The ester chain conformation generates a small hollow where two oxygen atoms face.

Determination of 3-methylflavone-8-carboxylic acid, the main metabolite of flavoxate, in human urine by capillary electrophoresis with direct injection.

The effects of tetraalkylammonium salts and sodium dodecyl sulphate on the migration behaviour of human urinary components and other negatively charged or neutral solutes were investigated. The sulphate acted mainly on hydrophobic and positively charged substances, whereas the ammonium salts acted mainly on negatively charged solutes. By choosing the components of the eluent carefully, the free and conjugate forms of 3-methylflavone-8-carboxylic acid (MFA) in human urine, the major metabolites of flavoxate, could be simultaneously determined without pretreatment, using fenprofen as an internal standard. The calibration curve of MFA was linear in the range 1-50 micrograms/ml and the detection limit was 0.2 microgram/ml, which covered the urine levels encountered in pharmacokinetic studies. The intra-day and inter-day precisions of the method, expressed as the relative standard deviation, were less than 2 and 3%, respectively. This method was successfully applied to an excretion study of MFA in eight healthy volunteers, and the results were in agreement with data in the literature obtained by gas chromatography.