Extra-articular Osteotomy for the Management of Intra-articular Tibial Plateau Valgus Malunion.

OBJECTIVES: To report a case series of extra-articular osteotomies for the management of intra-articular tibial plateau malunions and to assess the ability to correct deformity and improve knee range of motion (ROM). METHODS: . DESIGN: Retrospective case series. SETTING: Academic, tertiary, referral center. PATIENT SELECTION CRITERIA: Adult patients with tibial plateau fracture malunion treated with extra-articular osteotomy of the femur and/or tibia between 2014 and 2023. OUTCOME MEASURES AND COMPARISON: Mechanical axis deviation (MAD), medial proximal tibia angle (MPTA), lateral distal femoral angle (LDFA), and posterior proximal tibia angle (PPTA) correction; knee ROM; and time to weight bearing. RESULTS: There were 7 patients included, 6 (85.7%) were female and 1 (14.3%) were male. The median age was 43.5 years (IQR 38.5-51, range 32-62). Four (57.1%) patients were treated with a high tibial osteotomy (HTO), and 3 (42.9%) patients were treated with an HTO and distal femoral osteotomy. One patient had concomitant supramalleolar osteotomy with HTO to address distal tibia procurvatum and valgus. Four were treated with hexapod frames, and 3 were treated with plates and screws. Median follow-up was 22.5 months (IQR 10.5-107 months, range 7-148 months). Surgical intervention corrected median radiographic measures of valgus malalignment preoperatively relative to postoperative values. This included MAD (42.5 mm-0 mm), valgus angle (12.5 degrees-1.5 degrees), MPTA (95 degrees-88.0°), and LDFA (86.0°-87.3 degrees). Surgical intervention increased maximal knee range of motion preoperatively to postoperatively. Median time to full weight bearing was 81.5 days (IQR 46-57 days, range 41-184 days). Two patients were converted to total knee arthroplasty after 5 and 10 years following HTO with hexapod frame. CONCLUSIONS: Extra-articular osteotomy is an effective treatment for addressing intra-articular malunion after tibia plateau fractures. It is effective in correcting the MAD, valgus deformity, MPTA, LDFA, PPTA, and improving knee ROM (measured through knee extension and flexion). LEVEL OF EVIDENCE: Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Improving standard volar plate fixation in 3D-guided corrective osteotomy of the distal radius: evaluation of a shim instrument.

Standard volar plates often do not fit the surface of the malunited distal radius after osteotomy, necessitating an offset angle for accurate volar tilt correction. The correction can be achieved if the plate is held at the correct angle when the distal screws are locked. With the advantage of 3D surgical planning and patient-specific instruments, we developed a shim instrument to assist the surgeon in securing the plate at the intended angle when locking the distal screws, and evaluated radiological results. Five female patients aged 63-74 with dorsally angulated extra-articular malunions underwent surgery using 3D-printed guides and the shim instrument. The plate position, drilling guide alignment, screw placements, and distal radius correction on postoperative CTs were compared with the surgical plans. Errors were measured using an anatomical coordinate system, and standard 2D radiographic measures were extracted. Preoperative dorsal tilt ranged from 16° to 35°, and postoperative volar tilt from 1° to 11°. 3D analysis revealed mean absolute correction errors of 6.1° in volar tilt, 1.6° in radial inclination, and 0.6 mm in ulnar variance. The volar tilt error due to the shim instrument, indicated by the mean angle error of the distal screws to the plate, was 2.1° but varied across the five patients. Settling of the distal radius, due to tension during and after reduction, further contributed to a mean loss of 3.5° in volar tilt. The shim instrument helped with securing plates at the intended angle; however, further correction improvements should consider the tension between the fragments of osteoporotic bone.

Malunion of a clavicle fracture caused thoracic outlet syndrome in a professional violinist.

Clavicle fractures are a common injury in adults. Most patients are treated non-operatively. In this case report, a 53-year-old professional violinist had a midt shaft clavicula fracture and was treated non-operatively. The fracture healed, but the patient developed thoracic outlet syndrome (TOS) and a venous thrombosis when playing violin. Surgery with restoration of the normal anatomy alleviated the symptoms and six months later she was symptom free and playing violin again. TOS is a rare complication to clavicle fractures and the treating doctors should be aware of the diagnosis.

A morphological review of medial malleolar fractures - A large single centre series.

BACKGROUND: Many approaches to management of medial malleolar fractures are described in the literature however, their morphology is under investigated. The aim of this study was to analyse the morphology of medial malleolar fractures to identify any association with medial malleolar fracture non-union or malunion. METHODS: Patients who had undergone surgical fixation of their MMF were identified from 2012 to 2022, using electronic patient records. Retrospective analysis of their preoperative, intraoperative, and postoperative radiographs was performed to determine their morphology and prevalence of non-union and malunion. Lauge-Hansen classification was used to characterise ankle fracture morphology and Herscovici classification to characterise MMF morphology. RESULTS: A total of 650 patients were identified across a 10-year period which could be included in the study. The overall non-union rate for our cohort was 18.77% (122/650). The overall malunion rate was 6.92% (45/650). Herscovici type A fractures were significantly more frequently mal-reduced at time of surgery as compared to other fracture types (p = .003). Medial wall blowout combined with Hercovici type B fractures showed a significant increase in malunion rate. There is a higher rate of bone union in patients who had been anatomically reduced. CONCLUSION: The morphology of medial malleolar fractures does have an impact of the radiological outcome following surgical management. Medial wall blowout fractures were most prevalent in adduction-type injuries; however, it should not be ruled out in rotational injuries with medial wall blowouts combined with and Herscovici type B fractures showing a significant increase in malunions. Herscovici type A fractures had significantly higher malreductions. LEVEL OF EVIDENCE: Level 3 - Retrospective Cohort Study.

Intramedullary nailing of femoral shaft fractures: an analysis of rotational malunions using 3D EOS.

PURPOSE: Rotational malalignment and leg length discrepancy after intramedullary nailing of femoral shaft are frequent. This study has three objectives: evaluate the rate of femoral rotational malalignment and leg length discrepancy using EOS imaging after antegrade intramedullary nailing of femoral shaft fracture, find a relevant clinical examination to detect malrotation and identified risk factors. METHODS: We performed a retrospective single-centre study between January 2014 and January 2022. Fifty-eight patients were clinically and radiographically assessed at a minimum of three months. RESULTS: The femoral rotation of the operated side was significantly greater by a mean of 15.4° in internal rotation compared to the healthy side. There was no statically significant difference for the femoral length (p = 0.08). CONCLUSION: When using EOS stereography following antegrade intramedullary nailing of post-traumatic diaphyseal femur fractures, a statistically significant difference of more than 15.4° in internal rotation was found for femoral rotation on the operated side compared to the healthy side.Please confirm if the author names are presented accurately and in the correct sequence (given name, middle name/initial, family name). Author 1 Given name: [B. Poirot] Last name [Seynaeve]. Also, kindly confirm the details in the metadata are correct.The last name of the first author was corrected : Given name = B. and last name = Poirot Seynaeve The details in matadata are correct LEVEL OF EVIDENCE: III.

Segmental femoral fracture malunion: evidence and prognostic analysis of medical intervention in the third century BC.

We examined the remains of an individual who was unearthed from the Tuchengzi site and was believed to be from the Warring States period in China. The remains exhibited segmental femoral fracture. We aimed to deduce the cause of fracture, medical interventions, healing process, and motion behavior after fracture healing using several techniques, including macroscopic observation, computed tomography (CT), and finite element analysis. Based on the morphology of the long bones, it appeared that the individual was male. The fractures resulted in an adduction angle of 5.47° and an anterior flexion angle of 21.34° in the proximal femur, while the femoral neck anteversion angle had been replaced by a retroversion angle of 10.74°. Additionally, the distal femur formed an abnormal anterior convex angle of 144.60°. CT revealed mature callus formation and visible trabecular bundles. The finite element analysis indicated that the maximum von Mises stress in the femur was 17.44 MPa during standing and 96.46 MPa during walking. We suggest that medical practitioners in the Warring States period possessed a good knowledge of thigh anatomy, enabling them to perform fracture reduction and fixation. Reasonable medical intervention facilitated fracture healing and load recovery. Satisfactory fracture healing ensured that the individual could engage in normal standing and walking activities after rehabilitation.

Corrective osteotomy of the distal radius with palmar locking plate osteosynthesis without bone grafting and without cortical contact.

The aim of this study was to assess bone healing and secondary fracture displacement after corrective osteotomy of the distal radius without any cortical contact using palmar locking plates without bone grafting. Between 2009 and 2021, 11 palmar corrective osteotomies of extra-articular malunited distal radius fractures and palmar plate fixations without the use of bone grafts and without cortical contact, were assessed. All patients showed complete osseous restoration and significant improvement in all radiographic parameters. Except for one patient, there were no secondary dislocations or loss of reduction in the postoperative follow-up. Bone grafts may not be mandatory for bone healing and prevention of secondary fracture displacement after palmar corrective osteotomy without cortical contact and fixation with palmar locking plate.Level of evidence: IV.

The treatment of a malunited posterior pilon fracture with talar dislocation: A staged surgical treatment protocol.

BACKGROUND: Malunited posterior pilon fractures with talus dislocation (mPPFtd) are rare and there are no appropriate treatment strategies. The purpose of this study was to introduce a stepped strategy featuring preliminary soft tissue management according to the Ilizarov principle and delayed open reduction and internal fixation (ORIF) through a modified posteromedial approach to overcome rigid soft tissue contracture. METHOD: From February 2015 to August 2021, 12 selected patients with mPPFtd who were treated with the staged protocol (Group A) were retrospectively analysed. The clinical and radiographic outcomes were evaluated using the American Orthopaedic Foot and Ankle Society (AOFAS) ankle-hindfoot score, the visual analogue scale (VAS) score, and the Burwell-Charnley score. Moreover, this case series was compared with some cases of fresh fracture (Group B) in patients that had the same baseline data from our previous study. RESULTS: In Group A, the average length of time between the date of injury and the date of surgery was 4.8 ± 3.3 months. The average time to external fixator distraction, as the first-stage treatment, was 13.4 ± 1.0 days. In the second stage of ORIF, the posterosuperior dislocation of the talus was corrected with osteotomy and leverage manoeuvres. According to the Burwell-Charnley score system, the reduction quality was excellent in 9 cases and good in 3 cases. After a mean follow-up of 3.8 ± 2.1 years, there were no infections, wound healing problems, or nerve injuries in our cohort, and union was observed in all fractures without a loss of reduction. The baseline data of the two groups were not significantly different (p>0.05). The mean AOFAS score in Group A was 85.0 ± 10.5 and that in Group B was 95.4 ± 6.1 (p<0.05). The mean VAS score in Group A was 1.7 ± 1.4 and that in Group B was 0.7 ± 0.9 (p<0.05). CONCLUSION: A staged surgical treatment strategy characterized by soft tissue management will improve the treatment of mPPFtd and produce satisfactory clinical outcomes. LEVEL OF EVIDENCE: Level IV, retrospective case series.

[Malunion of the distal radius: 3D planning and performance of intra- and extra-articular corrective osteotomy]. / Malunion der distalen Radiusfraktur: 3-D-Planung und Durchführung von intra- und extraartikulären Korrekturosteotomien.

OBJECTIVE: Restoration of the original anatomy with reduction of both current symptoms and risk of posttraumatic osteoarthritis. INDICATIONS: Symptomatic intra- or extra-articular malunion due to limitation of movement and/or painful function, intra-articular step of > 1 mm, instability of the distal radioulnar joint. CONTRAINDICATIONS: Minimal deformity. Pre-existing osteoarthritis Knirk and Jupiter II or higher. Simpler surgical alternative, e.g., ulna shortening osteotomy. Smoking or advanced age are not contraindications. SURGICAL TECHNIQUE: Preoperative assessment and performance of a bilateral computed tomography (CT). Three-dimensional (3D) malposition analysis and calculation of the correction. Planning of the corrective osteotomy on the 3D model and creation of patient-specific drilling and sawing guides. Performing the 3D-guided osteotomy. POSTOPERATIVE MANAGEMENT: Early functional unloaded mobilization with the splint for 8 weeks until consolidation control with CT. RESULTS: Significant reduction of the step to < 1 mm (p ≤ 0.05) can be achieved with intra-articular corrections. In extra-articular corrective osteotomies, a mean residual rotational malalignment error of 2.0° (±â€¯2.2°) and a translational malalignment error of 0.6 mm (±â€¯0.2 mm) is achieved. Single-cut osteotomies in the shaft region can be performed to within a few degrees for rotation (e.g., pronation/supination 4.9°) and for translation (e.g., proximal/distal, 0.8 mm). After surgery, a mean residual 3D angle of 5.8° (SD 3.6°) was measured. Furthermore, surgical time for 3D-assisted surgery is significantly reduced compared to the conventional technique (140 ± 37 vs 108 ± 26 min; p < 0.05). Thus, the progression of osteoarthritis can be reduced in the medium term and improved mobility and grip strength are achieved. The clinical outcome parameters based on patient-rated wrist evaluation (PRWE) and the disabilities of the arm, shoulder and hand (DASH) scores are roughly comparable.

Minimal Invasive Corrective Osteotomy with the Ilizarov Mini-Fixator for Malunited Fractures of Proximal Phalanges in Adolescence: Report of Three Cases and a Review of the Literature.

Posttraumatic malunion with combination of angular, rotational, and shortening deformity of the proximal phalanx may cause scissoring of a finger and impairment of hand function. Cosmetic disfigurement and severe dysfunction of fingers require surgical correction, most often via open corrective osteotomies and rigid fixation with a plate or screws. However, such an approach requires a longer incision, inevitably results in a scar, and has a higher potential for extensor tendon adhesion. Also, abruption of the periosteum and plating of the phalange requires longer bone healing time. Thus, we devised a technique of minimally invasive correction of phalangeal malunion using an external mini-fixator. We presented representative three cases of malunited fractures of phalanges treated with the Ilizarov mini-fixator in adolescence and review reports of similar cases. The usage of Ilizarov mini-fixator provided excellent outcomes for posttraumatic malunion of three fingers.

Corrective Osteotomy of Malunited Forearm Fractures for Volar Distal Radioulnar Joint Instability: A Case Report.

CASE: A 6-year-old girl who had midshaft forearm fractures treated conservatively had volar distal radioulnar joint (DRUJ) instability caused by radial malunion at the 1-year follow-up. Corrective osteotomy was planned using computer-aided design (CAD) software based on computed tomography images. According to the analysis, the radial bone had an 8° apex volar deformation in the sagittal plane. Corrective osteotomy was performed based on preoperative planning. After surgery, the patient regained full function of her right forearm without volar DRUJ instability. CONCLUSION: This case report shows that corrective osteotomy with 3D CAD analysis can help surgeons plan and accurately correct malunion.

Change in capitate shift after osteotomy for distal radial fracture malunion.

Loss of anterior tilt after a distal radial fracture can lead to carpal malalignment, which may cause functional impairment. The aim of this study was to establish whether distal radial osteotomy for malunion, which primarily restores the dorsal tilt, will also improve carpal malalignment as measured by capitate shift. Radiographs of 67 patients who underwent osteotomy after malunion of a distal radial fracture were reviewed. Measurements of capitate shift and dorsal tilt were recorded. Linear regression modelling was used to assess the relationship between dorsal tilt and capitate shift. Change in capitate shift was strongly associated with change in dorsal tilt following osteotomy. This relationship was maintained on long-term radiographs. Capitate shift is strongly related to dorsal tilt following a distal radial fracture. Correcting the dorsal tilt during an osteotomy, therefore, will improve capitate shift and carpal malalignment. Capitate shift is unrelated to age, sex and is easy to visually assess.Level of evidence: IV.

Virtual surgical planning and mirrored, 3-dimensionally printed guides for corrective clavicle osteotomies in clavicle malunions and nonunions.

BACKGROUND: The objective of this study was to retrospectively review clinical and radiographic outcomes of patients who underwent corrective osteotomies for clavicle malunion and internal fixation for nonunion using a combination of virtual surgical planning, patient-specific 3-dimensional (3D)-printed clavicles, and 3D-printed cutting guides manufactured at the point of care. METHODS: Between 2015 and 2021, 18 patients underwent corrective osteotomy for a clavicle malunion (7 shoulders) or internal fixation for a clavicle nonunion (11 shoulders). There were 11 male and 7 female individuals with an average patient age of 43.9 (range 19-76) years. All patients underwent computed tomography evaluation of both clavicles. The DICOM files were manually segmented, virtual surgical planning was performed selectively using commercially available software, and a mirrored version of the normal clavicle was 3D printed along with a 3D-printed replica of the affected clavicle. Three-dimensionally printed mirrored clavicles were used in all cases to ensure adequate restoration of the shape and length of the clavicle and to precontour fixation plates. Virtual surgical planning and 3D-printed cutting guides for osteotomy were used in 4 of 18 (22%) patients. Either cancellous or structural intercalary bone grafting was used in 15 of 18 (83%) cases. Patients were contacted postoperatively to determine clinical outcome scores. Preoperative, early postoperative, and late postoperative radiographs were reviewed to assess for union and complications. The average follow-up time was 24.9 months. RESULTS: Radiographic evaluation at the most recent follow-up demonstrated adequate restoration of length and successful union for all shoulders. There were no complications or reoperations. Postoperative patient-reported outcomes could be obtained in 16 of 18 (88.9%) patients. At the most recent follow-up, the mean visual analog scale for pain was 2.38 points (range, 1-7), the mean shoulder American Shoulder and Elbow Surgeons score was 73.2 points (range, 25-100), and the mean Patient-Reported Outcome Measurement Information System Upper Extremity score was 26 points (range, 7-35). All (100%) the patients were satisfied with their outcome (9 very satisfied, 7 satisfied), and their mean subjective shoulder value was 73% (range, 10%-100%). However, 2 patients complained of hardware-related symptoms, and 1 patient had return of preoperative symptoms after an interim 2 years of pain relief. CONCLUSION: The use of mirrored 3D-printed clavicles combined with virtual surgical planning and patient-specific 3D guides provides a reliable technique for restoring native anatomy when performing corrective osteotomies for clavicle malunion or internal fixation for clavicle nonunion, with a high rate of satisfactory clinical and radiographic outcomes.

Dorsally and volarly angulated extra-articular malunions of the distal radius treated with volar corrective osteotomy and volar locking plate fixation. A case series of 19 patients with a long-term follow-up.

BACKGROUND AND AIM: To date, different technique of corrective osteotomy for the treatment of distal radius extra-articular malunions are described. With this study, we present a case series of corrective osteotomy using volar plate fixation to treat volar and dorsal extra-articular malunions aiming to evaluate the effectiveness of corrective osteotomies through volar plate stabilization in these two types of extra-articular malunions. METHODS: Between August 2008 and May 2017 all patients diagnosed with extra-articular malunion were included in the study. An extended volar Orbay approach and two types of dedicated volar locking plate (Medartis AG, Switzerland and Acumed, Hillsboro,OR) were used. Clinical and radiological parameters were evaluated. The DASH and PRWE scores and the VAS scale questionnaires were administered. The results were analyzed through statistical evaluations. RESULTS: A retrospective analysis of 19 patients diagnosed with extra-articular malunion was carried out. Nine had a volar type deformity (group A), while the other 10 had a dorsal type deformity (group B). The active range of motion (aROM), radiographic parameters, grip strength and pinches in both groups were statistically improved, except for radial deviation in both groups, ulnar deviation in group A, and radial inclination in group B.  The grip strength and pinches values were slightly better in group A. DASH, PRWE scores and VAS scale showed a significant improvement. CONCLUSION: Corrective osteotomy through volar fixation is an effective technique to treat both extra-articular dorsally and volarly angulated malunions. Statistically significant benefits are present in both types of deformities, with better outcomes in the group of volar deformities.

Open reduction through original fracture line and fixation with locking plate is a feasible approach for extra-articular distal radius fracture malunion.

OBJECTIVES: This study aims to investigate the effectiveness of open reduction through original fracture line and fixation with locking plate in treatment of extra-articular distal radius fracture (DRF) malunion. PATIENTS AND METHODS: Between January 2015 and December 2018, a total of 69 patients (27 males, 42 females; mean age: 62.0±8.9 years; range, 46 to 70 years) suffering from symptomatic extra-articular DRF malunion were included. All patients were followed for more than six months. Patient's demographics, hand dominance, data including Quick Disabilities of the Arm, Shoulder and Hand (QuickDASH) questionnaire, pain on a Visual Analog Scale (VAS) score, radius height, ulnar variance, wrist range of motion, volar tilt and radial inclination before and after surgery were analyzed. RESULTS: The median follow-up was 14.13 months, and the median time to fracture healing after the operation was 14.25 weeks. The mean QuickDASH score and VAS score were significantly reduced from 63.4±13.97 and 4.6±1.23 preoperatively to 7.8±4.67 and 1.3±0.76 at the final follow-up, respectively. Radius height, ulnar variance, volar tilt, radial inclination and wrist range of motion (flexion, extension, pronation, supination) were all significantly improved (p<0.001). Images showed good radius height, ulnar variance, volar tilt and radial inclination. The range of motion of wrist and forearm were improved substantially. Among 69 patients, two patients received allograft due to osteoporotic bone collapse. No serious complication was developed, except for minor pain in three patients during follow-up. CONCLUSION: Open reduction through original fracture line and fixation with locking plate is a feasible and effective treatment for selective DRF malunion.

A comparison of early fixation of distal radius fractures versus late corrective osteotomy of distal radius malunion.

BACKGROUND: Fractures of the distal radius are common. Closed reduction and moulded casting is often the first line treatment. Malunion after casting is not uncommon and can lead to discussion on acute surgical fixation versus delayed corrective osteotomy if symptomatic. However, it is unclear if late surgery will provide similar outcomes as early intervention. METHODS: We performed a single centre, age matched, case series comparison study, comparing outcomes of patients who had undergone early fixation (ORIF) versus those who had undergone late corrective osteotomy (CO) following distal radius fracture. RESULTS: Twenty-six patients were available for review, 13 in each group. Fracture patterns were similar. Reviewing CO versus ORIF; patients achieved a mean DASH; 22 versus 18 (P = 0.355), PRWE; 35 versus 26 (P = 0.237), and VAS 2 versus 2 (P = 0.490). Grip strength was significantly better in those who had undergone ORIF; 2% versus -22% (P ≤ 0.001). Range of motion was generally better with primary fixation but of doubtful clinical importance, reviewing CO versus ORIF; Flexion 46° versus 60° (P = 0.045), extension 55° versus 64° (P = 0.137), pronation 73° versus 85° (P = 0.078), supination 84° versus 84° (P = 0.747), flexion/extension arc 101 versus 124 (P = 0.017), ulnar/radial deviation arc 42° versus 59° (P = 0.01), pronation/supination arc 157° versus 168° (P = 0.118). Ulnar variance was significantly improved in the ORIF group; +0.5 mm versus +2 mm in the CO group (P = 0.023). Radial inclination, radial height and volar tilt were not significantly different between either group. CONCLUSION: Our findings suggest that patient measured outcome of corrective osteotomy is not inferior to early internal fixation. LEVEL OF EVIDENCE: III (Case Series Comparison).

Preoperative Three-Dimensional Simulation of Osteotomy for Correction of Malunion of Both Bones of Forearm: A Case Report.

Corrective osteotomy of malunion of both forearm bones is a challenging procedure because it needs accurate angular and rotational correction of both bones. Recent advances in three-dimensional (3D) printing techniques have shown promising results in the correction of complex deformities. We report a patient with malunion of both bones of the forearm in whom we determined site and degree of correction required based on the computed tomography images of the affected side and mirrored images of the contralateral healthy side. We then created 3D printed sawbones and simulated osteotomy to confirm stable dynamic forearm rotation. This method enabled satisfactory restoration of anatomical and functional outcomes. Preoperative dynamic motion simulation using 3D printed anatomic bone model is helpful for complex corrective osteotomy of forearm fracture malunion. Level of Evidence: Level V (Therapeutic).

Corrective Osteotomy with Volar and Dorsal Fixation for Malunion of Intra-Articular Fracture of the Distal Radius: A Retrospective Study.

OBJECTIVES: Although corrective osteotomy with volar or dorsal plate fixation can treat malunion of distal radius fractures, each has its own disadvantages. Little is currently known on whether dorsal fixation combined with volar fixation may further improve recovery. This study aimed to evaluate the clinical value of corrective osteotomy combined with volar and dorsal plate fixation in patients with malunion of intra-articular fractures of the distal radius. METHODS: Seventeen patients with malunion of intra-articular fractures of the distal radius treated with corrective osteotomy with volar and dorsal plate fixation from 1 January 2016 to 31 November 2018 were retrospectively analyzed. The enrolled patients included seven males and 10 females with an average age of 54.9 years (range: 36-70 years). The radiographic parameters, including the radial length, the radial inclination angle, the ulnar variance, and the volar tilt, as well as clinical outcomes, including wrist and forearm range of motion (ROM), grip strength, the Mayo Modified Wrist Score (MMWS), and the disabilities of the Arm, Shoulder, and Hand (DASH) score, were examined at 3 months and 18 months after operation and compared with the preoperative state. The paired t-test was used for statistical analysis. RESULTS: After corrective osteotomy combined with volar and dorsal plate fixation, all included patients were followed up for 18 months, and there was no surgical site infection. Patients reported postoperative pain due to the irritation of extensor tendon (two cases) and wrist arthritis (two cases). The radial length increased from 1.34 ± 2.34 mm to 9.25 ± 2.65 mm and 9.03 ± 2.47 mm at 3 months and 18 months postoperatively (t = 8.257, 7.954, all p < 0.05). The radial inclination angle increased from 6.45° ± 0.76° to 19.35° ± 3.43° and 19.03° ± 3.63° at 3 and 18 months (t = 12.517, 12.122, all p < 0.05). The ulnar variance decreased from 5.11 ± 0.23 mm to 1.32 ± 0.31 mm and 1.54 ± 0.62 mm at 3 and 18 months (t = 4.214, 4.895, all p < 0.05). The volar tilt was corrected from 4.47° ± 3.46° to 15.51° ± 2.72° and 14.12° ± 2.41°, respectively (t = 11.247, 10.432, all p < 0.05). Moreover, wrist ROM increased from 42.53° ± 8.99° to 98.70° ± 7.61° and 101.24° ± 7.66° (t = 41.433, 46.627, all p < 0.05), while forearm ROM was increased from 94.82° ± 6.54° to 134.47° ± 5.06° and 137.24° ± 5.52°, respectively (t = 31.507, 32.584, all p < 0.05). Similarly, grip strength, MMWS, and DASH were also remarkably improved. There were no significant differences in the wrist and forearm ROM, grip strength, MMWS, and DASH scores between follow-up at 3 and 18 months (all p > 0.05). CONCLUSIONS: Corrective osteotomy with volar and dorsal fixation can improve recovery of volar tilt, relieve wrist pain, restore wrist and forearm function, and increase grip strength of patients with malunion of intra-articular fractures of the distal radius.

Clinical outcomes of open-wedge corrective osteotomy using autogenous or allogenic bone grafts for malunited distal radius: A novel parameter for measuring the rate of bone union.

OBJECTIVE: The aims of the study were (1) to compare outcomes in terms of malunited distal radius bone union in open-wedge corrective osteotomy using autogenous or allogenic bone and (2) to introduce a new parameter that quantifies the rate of the bone union. METHODS: This retrospective study included 22 patients (14 males, 8 females) who underwent open-wedge corrective osteotomy with bone grafting for a malunited distal radius fracture between January 2006 and December 2018 were enrolled. The mean follow-up duration was 57.2 weeks (SD 46.1, range 12-206). All the patients were then divided into 1 of the 2 groups based on the graft material used: autog- enous bone graft group (n=10, 5 males and 5 females) and allogenic bone graft group (n=12, 9 males and 3 females). We introduced the "duration of union/correction gap ratio" to represent the healing potential of each graft materials. Radiologic parameters including initial correction gap, radial inclination, radial length, palmar tilt, and ulnar variance were also measured pre- and postoperatively. Functional outcomes were assessed by grip strength, range of motion, and the disability of the Arm, Shoulder, and Hand score. RESULTS: Of the 22 patients, 16 (72.7%) achieved complete union within 12 weeks, 3 (13.6%) in over 12 weeks, and the other 3 (13.6%) showed nonunion. Excluding the 3 nonunion cases, the mean union duration was 10.6 weeks, and the mean correction gap was 10 mm. The mean correction gap was wider in the autogenous bone graft group, and the mean union duration was longer in the allogenic bone graft group. Autogenous bone grafts had a significantly lower duration of bone union/correction gap ratio than allogenic bone grafts (0.76 vs. 1.61, P < 0.001). According to the correction method (simple open-wedge corrective osteotomy vs. open-wedge corrective oste- otomy OWCO), only duration of bone union/correction gap ratio reflected the actual difference between values. CONCLUSION: Despite autogenous bone graft donor site morbidities, in our study, autogenous bone showed better bone healing potential than allogenic bone. In terms of bone union, autogenous bone has the benefit of better union in larger gaps than allogenic bone. Surgeons can take advantage of the newly introduced "duration of bone union/correction gap ratio" to compare the bone healing potential by graft materials or surgical options. LEVEL OF EVIDENCE: Level IV, Therapeutic Study.

Focal Dome Osteotomy for the Treatment of Diaphyseal Malunion of the Lower Extremity.

The treatment of malunion of the lower extremity diaphysis is challenging. Diaphyseal osteotomies require extra care to promote bone healing. This may be enhanced through osteotomies, which do not produce bone gaps and allow for compression. The focal dome osteotomy allows for rotation around an axis to correct angular deformity. The production of a successful arcuate or focal dome osteotomy requires a suitable soft tissue host. The deformity analysis is not complex but essential to assess the feasibility of correction and is required for perfect execution of the osteotomy. This tutorial explains the technique for focal dome osteotomy to correct angular deformities of the lower extremities, specifically in the diaphysis. Surgical correction for malunion, infected malunion, and infected mal-nonunion case examples are discussed. With meticulous planning and surgical technique, the focal dome osteotomy is a viable option for correcting diaphyseal malunions with compression techniques that allow a stable construct for early weight-bearing.