Lipid-based microemulsion gel for the topical delivery of methotrexate: an optimized, rheologically acceptable formulation with conducive dermatokinetics.

In the present study, we have formulated a methotrexate (MTX)-loaded microemulsion topical gel employing quality-by-design optimization. The optimized lipid-based microemulsion was incorporated into a 2% carbopol gel. The prepared formulation was characterized for micromeritics, surface charge, surface morphology, conductivity studies, rheology studies, texture analysis/spreadability, drug entrapment, and drug loading studies. The formulation was further evaluated for drug release and release kinetics, cytotoxicity assays, drug permeation and drug retention studies, and dermatokinetics. The developed nanosystem was not only rheologically acceptable but also offered substantial drug entrapment and loading. From drug release studies, it was observed that the nanogel showed higher drug release at pH 5.0 compared to plain MTX, plain gel, and plain microemulsion. The developed system with improved dermatokinetics, nanometric size, higher drug loading, and enhanced efficacy towards A314 squamous epithelial cells offers a huge promise in the topical delivery of methotrexate.

Effects and mechanisms of ultrasound-assisted emulsification treatment on the curcumin delivery and digestive properties of myofibrillar protein-carboxymethyl cellulose complex emulsion gel.

Different emulsion gel systems are widely applied to deliver functional ingredients. The effects and mechanisms of ultrasound-assisted emulsification (UAE) treatment and carboxymethyl cellulose (CMC) modifying the curcumin delivery properties and in vitro digestibility of the myofibrillar protein (MP)-soybean oil emulsion gels were investigated. The rheological properties, droplet size, protein and CMC distribution, ultrastructure, surface hydrophobicity, sulfhydryl groups, and zeta potential of emulsion gels were also measured. Results indicate that UAE treatment and CMC addition both improved curcumin encapsulation and protection efficiency in MP emulsion gel, especially for the UAE combined with CMC (UAE-CMC) treatment which encapsulation efficiency, protection efficiency, the release rate, and bioaccessibility of curcumin increased from 86.75 % to 97.67 %, 44.85 % to 68.85 %, 18.44 % to 41.78 %, and 28.68 % to 44.93 % respectively. The protein digestibility during the gastric stage was decreased after the CMC addition and UAE treatment, and the protein digestibility during the intestinal stage was reduced after the CMC addition. The fatty acid release rate was increased after CMC addition and UAE treatment. Apparent viscosity, storage modulus, and loss modulus were decreased after CMC addition while increased after UAE and UAE-CMC treatment especially the storage modulus increased from 0.26 Pa to 41 Pa after UAE-CMC treatment. The oil size was decreased, the protein and CMC concentration around the oil was increased, and a denser and uniform emulsion gel network structure was formed after UAE treatment. The surface hydrophobicity, free SH groups, and absolute zeta potential were increased after UAE treatment. The UAE-CMC treatment could strengthen the MP emulsion gel structure and decrease the oil size to increase the curcumin delivery properties, and hydrophobic and electrostatic interaction might be essential forces to maintain the emulsion gel.

Thawed drip and its membrane-separated components: Role in retarding myofibrillar protein gel deterioration during freezing-thawing cycles.

Myofibrillar proteins are crucial for gel formation in processed meat products such as sausages and meat patties. Freeze-thaw cycles can alter protein properties, impacting gel stability and product quality. This study aims to investigate the potential of thawed drip and its membrane-separated components as potential antifreeze agents to retard denaturation, oxidation and gel deterioration of myofibrillar proteins during freezing-thawing cycles of pork patties. The thawed drip and its membrane-separated components of > 10 kDa and < 10 kDa, along with deionized water, were added to minced pork at 10 % mass fraction and subjected to increasing freeze-thaw cycles. Results showed that the addition of thawed drip and its membrane separation components inhibited denaturation and structural changes of myofibrillar proteins, evidenced by reduced surface hydrophobicity and carbonyl content, increased free sulfhydryl groups, protein solubility and α-helix, as compared to the deionized water group. Correspondingly, improved gel properties including water-holding capacity, textural parameters and denser network structure were observed with the addition of thawed drip and its membrane separation components. Denaturation and oxidation of myofibrillar proteins were positively correlated with gel deterioration during freezing-thawing cycles. We here propose a role of thawed drip and its membrane separation components as cryoprotectants against myofibrillar protein gel deterioration during freeze-thawing cycles.

Effect of limited proteolysis and CaCl2 on the rheology, microstructure and in vitro digestibility of pea protein-carboxymethyl cellulose mixed gel.

Limited proteolysis, CaCl2 and carboxymethyl cellulose (CMC) have individually demonstrated ability to increase the gel strength of laboratory-extracted plant proteins. However, the syneresis effects of their combination on the gelling capacity of commercial plant protein remains unclear. This was investigated by measuring the rheological property, microstructure and protein-protein interactions of gels formed from Alcalase hydrolyzed or intact pea proteins in the presence of 0.1 % CMC and 0-25 mM CaCl2. Sodium dodecyl-sulfate polyacrylamide gel electrophoresis (SDS-PAGE) showed the molecular weight of pea protein in the mixture were < 15 kDa after hydrolysis. The hydrolysates showed higher intrinsic fluorescence intensity and lower surface hydrophobicity than the intact proteins. Rheology showed that the storage modulus (G') of hydrolyzed pea protein (PPH)-based gels sightly decreased compared to those of native proteins. 5-15 mM CaCl2 increased the G' for both PP and PPH-based gels and decreased the strain in the creep-recovery test. Scanning electron microscopy (SEM) showed the presence of smaller protein aggregates in the PPH-based gels compared to PP gels and the gel network became denser, and more compact and heterogenous in the presence of 15 and 25 mM CaCl2. The gel dissociation assay revealed that hydrophobic interactions and hydrogen bonds were the dominant forces to maintain the gel structure. In vitro digestion showed that the soluble protein content in PPH-based gels was 10 âˆ¼ 30 % higher compared to those of the PP counterpart. CaCl2 addition reduced protein digestibility with a concentration dependent behavior. The results obtained show contrasting effects of limited proteolysis and CaCl2 on the gelling capacity and digestibility of commercial pea proteins. These findings offer practical guidelines for developing pea protein-based food products with a balanced texture and protein nutrition through formulation and enzymatic pre-treatment.

Photo-crosslinked chitosan-gelatin xerogel-like coating onto "cold" plasma functionalized poly(lactic acid) film as cell culture support.

This paper reports on biofunctionalisation of a poly(lactic acid) (PLA) film by surface activation through cold plasma treatment followed by coating with a chitosan-gelatin xerogel. The UV cross-linking of the xerogel precursor was simultaneously performed with the fixation onto the PLA support. This has a strong effect on surface properties, in terms of wettability, surface free energy, morphology and micromechanical features. The hydrophilic - hydrophobic character of the surface, determined by contact angle measurements, was tuned along the process, passing from moderate hydrophobic PLA to enhanced hydrophilic plasma activated surface, which favors coating adhesion, then to moderate hydrophobic chitosan-gelatin coating. The coating has a Lewis amphoteric surface, with a porous xerogel-like morphology, as revealed by scanning electron microscopy images. By riboflavin mediated UV cross-linking the chitosan-gelatin coating becomes high adhesive and with a more pronounced plasticity, as shown by AFM force-distance spectroscopy. Thus prepared surface-coated PLA supports were successfully tested for growth of dermal fibroblasts, which are known for their induction potential of chondrogenic cells, which is very important in cartilage tissue engineering.

Triple-Combination Clindamycin Phosphate 1.2%/Adapalene 0.15%/Benzoyl Peroxide 3.1% Gel for Acne in Adult and Pediatric Participants.

BACKGROUND: Topical clindamycin phosphate 1.2%/adapalene 0.15%/benzoyl peroxide 3.1% gel (CAB) is the first fixed-dose triple-combination approved for the treatment of acne. This post hoc analysis investigated the efficacy and safety of CAB in pediatric (<18 years) and adult (greater than or equal to 18 years) participants. METHODS: In two multicenter, double-blind, phase 3 studies (NCT04214639 and NCT04214652), participants greater than or equal to 9 years of age with moderate-to-severe acne were randomized (2:1) to 12 weeks of once-daily treatment with CAB or vehicle gel. Pooled data were analyzed for pediatric and adult subpopulations. Assessments included treatment success (greater than or equal to 2-grade reduction from baseline in Evaluator's Global Severity Score and a score of 0 [clear] or 1 [almost clear], inflammatory/noninflammatory lesion counts, Acne-Specific Quality of Life (Acne-QoL) questionnaire, treatment-emergent adverse events (TEAEs), and cutaneous safety/tolerability. RESULTS: At week 12, treatment success rates for both pediatric and adult participants were significantly greater with CAB (52.7%; 45.9%) than with vehicle (24.0%; 23.5%; P<0.01, both). CAB-treated participants in both subgroups experienced greater reductions from baseline versus vehicle in inflammatory (pediatric: 78.6% vs 50.4%; adult: 76.6% vs 62.8%; P<0.001, both) and noninflammatory lesions (pediatric: 73.8% vs 41.1%; adult: 70.7% vs 52.2%; P<0.001, both). Acne-QoL improvements from baseline to week 12 were significantly greater with CAB than with a vehicle. Most TEAEs were of mild-to-moderate severity; no age-related trends for safety/tolerability were observed.  Conclusions: CAB gel demonstrated comparable efficacy, quality of life improvements, and safety in pediatric and adult participants with moderate-to-severe acne. As the first fixed-dose, triple-combination topical formulation, CAB represents an important new treatment option for patients with acne. J Drugs Dermatol. 2024;23(6):394-402.     doi:10.36849/JDD.8357.

An Open-label Study to Investigate the Efficacy and Tolerability of Dapsone Gel, 7.5% in the Treatment of Acne Vulgaris in Men and Women With Skin of Color.

INTRODUCTION: Acne vulgaris is a common skin disease prevalent in skin of color patients. Studies have demonstrated that dapsone gel, 7.5% (Aczone) used once daily is effective, safe, and well-tolerated for the treatment of acne in both men and women. However, minimal data are available in skin of color populations. This single-center, open-label clinical study investigated the efficacy and safety of dapsone gel, 7.5% in the treatment of moderate to severe acne vulgaris in patients with Fitzpatrick skin types IV-VI. METHODS: Twenty (20) adult subjects with moderate to severe acne and Fitzpatrick skin types IV-VI were enrolled in this study and treated with dapsone gel, 7.5% once daily for 24 weeks. RESULTS: Dapsone gel, 7.5% applied daily for 24 weeks reduced acne severity, post-inflammatory hyperpigmentation, and decreased new inflammatory and noninflammatory acne lesions in skin of color patients with moderate to severe acne vulgaris. Treatment resulted in improved acne health-related quality of life and patient symptoms related to acne, including patient-reported post-inflammatory hyperpigmentation, especially with a treatment duration of 18 weeks or longer.  Limitations: The sample size was small and underpowered to detect statistically significant changes in some endpoints. CONCLUSION: Dapsone gel 7.5% was safe, well-tolerated, and efficacious in treating acne vulgaris and post-inflammatory hyperpigmentation in skin-of-color patients. Larger studies involving skin-of-color populations with acne vulgaris are warranted. J Drugs Dermatol. 2024;23(6):410-417. doi:10.36849/JDD.7897.

Comparison of stromal vascular fraction cell composition between Coleman fat and extracellular matrix/stromal vascular fraction gel.

As a mechanically condensed product of Coleman fat, extracellular matrix/stromal vascular fraction gel (ECM/SVF-gel) eliminates adipocytes, concentrates SVF cells, and improves fat graft retention. This study aims to compare SVF cell composition between Coleman fat and ECM/SVF-gel. Matched Coleman fat and ECM/SVF-gel of 28 healthy women were subjected to RNA-seq, followed by functional enrichment and cell-type-specific enrichment analyses, and deconvolution of SVF cell subsets, reconstructing SVF cell composition in the transcriptome level. ECM/SVF-gels had 9 upregulated and 73 downregulated differentially expressed genes (DEGs). Downregulated DEGs were mainly associated with inflammatory and immune responses, and enriched in fat macrophages. M2 macrophages, resting CD4+ memory T cells, M1 macrophages, resting mast cells, and M0 macrophages ranked in the top five most prevalent immune cells in the two groups. The proportions of the principal non-immune cells (e.g., adipose-derived stem cells, pericytes, preadipocytes, microvascular endothelial cells) had no statistical differences between the two groups. Our findings reveal ECM/SVF-gels share the same dominant immune cells beneficial to fat graft survival with Coleman fat, but exhibiting obvious losses of immune cells (especially macrophages), while non-immune cells necessary for adipose regeneration might have no significant loss in ECM/SVF-gels and their biological effects could be markedly enhanced by the ECM/SVF-gel's condensed nature.

Potential mechanisms and effects of ultrasound treatment combined with pre- and post-addition of κ-carrageenan on the gelling properties and rheological behavior of myofibrillar proteins under low-salt condition.

This study investigated the effect of ultrasound (US) combined with pre- and post-addition of κ-carrageenan (KC) on the gelling properties, structural characteristics and rheological behavior of myofibrillar proteins (MP) under low-salt conditions. The results showed that US combined with either pre- or post-addition of KC rendered higher gel strength and water holding capacity (WHC) of MP gels than those treated with US alone and added with KC alone (P < 0.05). US combined with pre-addition of KC facilitated the binding between MP and KC, which enhanced the gel strength and WHC of the mixed MP gels and significantly improved the rheological behavior of MP. This was also confirmed by the highest surface hydrophobicity, disulfide bonds and ß-sheet content of the MP gels with US combined with pre-addition of KC. Moreover, microstructural results reflected a denser structure for the pre-addition of KC in combination with US. However, US combined with post-addition of KC resulted in limited MP unfolding and relatively weak hydrophobic interactions in the composite gels, which were less effective in improving the gel properties of the MP gels. This study provides potential strategies for enhancing the gelling properties of low-salt meat products via application of US and KC.

Investigation of mechanical and thermal behavior of fiber-reinforced silica xerogel composites.

Silica aerogels or xerogels are renowned dried gels with low density, high surface area, higher porosity, and better thermal stability which makes it suitable for aerospace, light weight structures, thermal insulation, and hydrophobic coatings. But brittle behaviour, low mechanical strength, and high manufacturing cost restrict its usage. Recently, the addition of various fibres like glass or carbon fiber is one of the best reinforcement methods to minimize the brittle behaviour. Supercritical drying technique usually used to develop aerogel that is expensive and difficult to produce in bulk quantities. Higher cost obstacle can be tackled by applying ambient pressure drying technique to develop xerogel. But researcher observed cracks in samples prepared through the ambient pressure drying technique is still a major shortcoming. The aim of this study is to systematically analyze the influence of silica gel fiber reinforcement on silica xerogels, encompassing morphology, mechanics, thermal behaviour, compression test, and thermogravimetric characteristics. The research used a low-cost precursor named Tetraethyl orthosilicate to synthesize low-cost composite Silica xerogel and glass and carbon fiber added to provide strength and flexibility to the overall composite. Silica gel works as binder in strengthening the xerogel network. The investigation employs scanning electron microscopy (SEM) to examine the morphology of the composites, Fourier Transform Infrared (FTIR) analysis to affirm hydrophobic characteristics, compression tests to assess mechanical strength, and thermogravimetric tests to study weight loss under different conditions. SEM results reveals that glass fibers exhibit lower adhesion to the xerogel network compared to carbon fibers. FTIR analysis confirms the hydrophobicity of the composite silica xerogel. Compression tests showed that, under a 48% strain rate, the carbon fiber composite demonstrates superior compressive stress endurance. Thermogravimetric tests revealed a 1% lower weight loss for the carbon fiber composite compared to the glass fiber composite. This work concludes that glass and carbon fiber together with silica gel particles successfully facilitated in developing flexible, less costly, hydrophobic, and crack-free silica xerogel composites by APD. These advancements have the potential to drive innovations in material science and technology across diverse industries.

Naringenin-Zinc Oxide Nanocomposites Amalgamated Polymeric Gel Augmented Drug Delivery and Attenuated Experimental Cutaneous Candidiasis in Balb/c Mice: In Vitro and In Vivo Studies.

Naringenin (NRG) inhibits the fungal 17ß-hydroxysteroid dehydrogenase accountable for ergosterol synthesis in Candida albicans (C. albicans), a causative agent for cutaneous candidiasis. In present research, NRG was complexed with ZnO nanomaterial (NRG-Zn2+) to synthesize NRG-Zn2+ nanocomposites. The particle size and ζ-potential of NRG-Zn2+ nanocomposites were respectively estimated to be 180.33 ± 1.22-nm and - 3.92 ± 0.35-mV. In silico data predicted the greater affinity of NRG-Zn2+ nanocomposite for 14α-demethylase and ceramide in comparison to NRG alone. Later, NRG-Zn2+ nanocomposites solution was transformed in to naringenin-zinc oxide nanocomposites loaded chitosan gel (NRG-Zn-CS-Gel) with viscosity and firmness of 854806.7 ± 52386.43 cP and 698.27 ± 10.35 g, respectively. The ex-vivo skin permeation demonstrated 70.49 ± 5.22% skin retention, significantly greater (P < 0.05) than 44.48 ± 3.06% of naringenin loaded chitosan gel (NRG-CS-Gel) and 31.24 ± 3.28% of naringenin solution (NRG Solution). NRG-Zn-CS-Gel demonstrated 6.71 ± 0.84% permeation of NRG with a flux value of 0.046 ± 0.01-µg/cm2/h. The MIC50 of NRG-Zn-CS-Gel against C. albicans was estimated to be 0.156-µg/mL with FICI (fractional inhibitory concentration index) of 0.018 that consequently exhibited synergistic efficacy. Further, NRG-Zn-CS-Gel demonstrated superior antifungal efficacy in C. albicans induced cutaneous candidiasis infection in Balb/c mice. The fungal burden in NRG-Zn-CS-Gel treated group was 109 ± 25 CFU/mL, significantly lower (P < 0.05) than positive control (2260 ± 446 CFU/mL), naringenin loaded chitosan gel (NRG-CS-Gel; 928 ± 127 CFU/mL) and chitosan gel (CS-Gel; 2116 ± 186 CFU/mL) treated mice. Further, histopathology examination and cytokine profiling of TNF-α, IL-1ß and IL-10 revealed the healing of skin and inflammation associated with cutaneous candidiasis infection. In conclusion, NRG-Zn-CS-Gel may be a potential candidate for translating in to a clinical viable topical nanotherapeutic.

Clinical use of 0.1% polyhexanide and propylbetaine on acute and hard-to-heal wounds: a literature review.

OBJECTIVE: To summarise the findings on the effect of the clinical use of 0.1% polyhexanide-propylbetaine (PHMB/betaine) solution/gel on acute and hard-to-heal (chronic) wound healing. METHOD: A literature search was conducted in MEDLINE, CINAHL, Embase, Scopus and the CENTRAL Trials Registry of the Cochrane Collaboration. Paired reviewers conducted title and abstract screening and full-text screening to identify experimental, quasi-experimental and observational studies. Study quality and risk of bias were not formally evaluated. RESULTS: A total of 17 studies met the eligibility criteria. The findings from 12 studies indicated that the use of 0.1% PHMB/betaine solution/gel had: a low risk of contact sensitivity; could help debridement during wound cleansing; aided effective wound bed preparation; reduced wound size, odour and exudate; improved pain control; reduced microbial load; and enhanced wound healing. The results of three studies indicated that both 0.1% PHMB and saline solution were effective in reducing bacterial load, while another showed that adding 0.1% PHMB to tie-over dressings had no effect on reducing bacterial loads in wounds. Another study concluded that disinfection and granulation of pressure ulcers with hydrobalance dressing with 0.3% PHMB was faster and more effective than using 0.1% PHMB/betaine. CONCLUSION: The findings of this literature review showed that 0.1% PHMB/betaine solution/gel appeared to be useful and safe for wound cleansing, was effective in removing soft debris and slough from the wound bed, and created a wound environment optimal for healing. Although these actions cannot be attributed solely to this treatment modality, these results do highlight the unique action of this combined product. However, more robust studies are needed to confirm these results.

Evaluation of Emulgel and Nanostructured Lipid Carrier-Based Gel Formulations for Transdermal Administration of Ibuprofen: Characterization, Mechanical Properties, and Ex-Vivo Skin Permeation.

In transdermal applications of nonsteroidal anti-inflammatory drugs, the rheological and mechanical properties of the dosage form affect the performance of the drug. The aim of this study to develop emulgel and nanostructured lipid carrier NLC-based gel formulations containing ibuprofen, evaluate their mechanical properties, bioadhesive value and ex-vivo rabbit skin permeability. All formulations showed non-Newtonian pseudoplastic behavior and their viscosity values are suitable for topical application. The particle size of the nanostructured lipid carrier system was found to be 468 ± 21 nm, and the encapsulation efficiency was 95.58 ± 0.41%. According to the index of viscosity, consistency, firmness, and cohesiveness values obtained as a result of the back extrusion study, E2 formulation was found to be more suitable for transdermal application. The firmness and work of shear values of the E2 formulation, which has the highest viscosity value, were also found to be the highest and it was chosen as the most suitable formulation in terms of the spreadability test. The work of bioadhesion values of NLC-based gel and IBU-loaded NLC-based gel were found as 0.226 ± 0.028 and 0.181 ± 0.006 mJ/cm2 respectively. The percentages of IBU that penetrated through rabbit skin from the Ibuactive-Cream and the E2 were 87.4 ± 2.11% and 93.4 ± 2.72% after 24 h, respectively. When the penetration of ibuprofen through the skin was evaluated, it was found that the E2 formulation increased penetration due to its lipid and nanoparticle structure. As a result of these findings, it can be said that the NLC-based gel formulation will increase the therapeutic efficacy and will be a good alternative transdermal formulation.

Development of silanized bacterial cellulose aerogels for the incorporation of natural oils with healing properties: Copaiba (Copaifera officinalis), bourbon geranium (Pelargonium X ssp.) essential oils and buriti (Mauritia flexuosa) vegetable oil.

Bacterial cellulose (BC) represents a promising biomaterial, due to its unique and versatile properties. We report, herein, on purposely-designed structural modifications of BC that enhance its application as a wound dressing material. Chemical modification of the functional groups of BC was performed initially to introduce a hydrophobic/oleophilic character to its surface. Specifically, silanization was carried out in an aqueous medium using methyltrimethoxisilane (MTMS) as the silanizing agent, and aerogels were subsequently prepared by freeze-drying. The BC-MTMS aerogel obtained displayed a highly porous (99 %) and lightweight structure with an oil absorption capacity of up to 52 times its dry weight. The XRD pattern indicated that the characteristic crystallographic planes of the native BC were maintained after the silanization process. Thermal analysis showed that the thermal stability of the BC-MTMS aerogel increased, as compared to the pure BC aerogel (pBC). Moreover, the BC-MTMS aerogel was not cytotoxic to fibroblasts and keratinocytes. In the second step of the study, the incorporation of natural oils into the aerogel's matrix was found to endow antimicrobial and/or healing properties to BC-MTMS. Bourbon geranium (Pelargonium X ssp.) essential oil (GEO) was the only oil that exhibited antimicrobial activity against the tested microorganisms, whereas buriti (Mauritia flexuosa) vegetable oil (BVO) was non-cytotoxic to the cells. This study demonstrates that the characteristics of the BC structure can be modified, while preserving its intrinsic features, offering new possibilities for the development of BC-derived materials for specific applications in the biomedical field.

[Preparation and characterization of co-loaded indocyanine green and elemene nano-emulsion in situ gel and its effect on proliferation of breast cancer MCF-7 cells].

This study aims to prepare co-loaded indocyanine green(ICG) and elemene(ELE) nano-emulsion(NE) in situ gel(ICG-ELE-NE-gel) and evaluate its physicochemical properties and antitumor activity in vitro. ICG-ELE-NE-gel was prepared by aqueous phase titration and cold solution methods, followed by characterization of the morphology, particle size, corrosion, and photothermal conversion characteristics. The human breast cancer MCF-7 cells were taken as the model, combined with 808 nm laser irradia-tion. Cell inhibition rate test and cell uptake test were performed. ICG-ELE-NE was spherical and uniform in size. The average particle size and Zeta potential were(85.61±0.35) nm and(-21.4±0.6) mV, respectively. The encapsulation efficiency and drug loading rate were 98.51%±0.39% and 10.96%±0.24%, respectively. ICG-ELE-NE-gel had a good photothermal conversion effect and good photothermal stability. The dissolution of ICG-ELE-NE-gel had both temperature and pH-responsive characteristics. Compared with free ELE, ICG-ELE-NE-gel combined with near-infrared light irradiation significantly enhanced the inhibitory effect on MCF-7 cells and could be uptaken in large amounts by MCF-7 cells. ICG-ELE-NE-gel was successfully prepared, and its antitumor activity was enhanced after 808 nm laser irradiation.

[Transdermal diffusion research on functional substances of Jingu Zhitong Gel].

This study systematically explored the transdermal diffusion law of functional substances of Jingu Zhitong Gel(JGZTG). The transdermal diffusion research methods of JGZTG were investigated by single factor trial with the automated transdermal(dry-heat) sampling system. High performance liquid chromatography(HPLC) content determination method was established to determine the contents of ferulic acid, senkyunolide I, cinnamic acid, hydroxy-ε-xanthoxylin, hydroxy-α-xanthoxylin, and hydroxy-ß-xanthoxylin in the transdermal diffusion solution of JGZTG. The transdermal diffusion law of the components within 16 h was investigated. The results showed that the optimal transdermal diffusion method of JGZTG was as follows: Rat skin was used as the transdermal barrier; normal saline was used as the receiving medium; the dosage of JGZTG was 0.3 g, and the receiving solution was extracted by ethyl acetate. The results of transdermal diffusion showed that the release of ferulic acid, cinnamic acid, and senkyunolide I increased significantly at 0-8 h and slowed down at 8-16 h. The drug release was a synergic process of diffusion and dissolution, in which ferulic acid and cinnamic acid followed Higuchi and Ritger-Peppas equations, and liguolactone I followed Higuchi equation. The transdermal diffusion curves of hydroxy-ε-zanthoxylin, hydroxy-α-zanthoxylin, and hydroxy-ß-zanthoxylin showed continuous release within 16 h, and the drug release was skeleton dissolution. The diffusion law followed zero-order equation, first-order equation, and Ritger-Peppas equation. In clonclusion, it is a controlled release of ferulic acid, ligustrone I, cinnamic acid, hydroxy-ε-pyrroxylin, hydroxy-α-pyrroxylin, and hydroxy-ß-pyrroxylin in JGZTG, which can maintain stable blood drug concentration with 16 h, and the cumulative transmittance of each component with 12 h can reach 80% of cumulative transmittance with 24 h, which is in line with the clinical drug use law of bis in die.