Repeatability and agreement of white-to-white measurements between slit-scanning tomography, infrared biometry, dual rotating Scheimpflug camera/Placido disc tomography, and swept source anterior segment optical coherence tomography.

PURPOSE: To assess the agreement and repeatability of horizontal visible iris diameter (HVID) or white-to-white (WTW) measurements between four imaging modalities; combination slit scanning elevation/Placido tomography, infrared biometry, dual rotating scheimpflug camera/Placido tomography, and swept source anterior segment optical coherence tomography (AS-OCT). METHODS: A prospective study of 35 right eyes of healthy volunteers were evaluated using the Orbscan IIz, IOL Master 700, Galilei G2, and DRI Triton OCT devices. The inter-device agreement and repeatability of HVID/WTW measurements for each device were analysed. RESULTS: Mean HVID/WTW values obtained by the Orbscan IIz, IOL Master 700, Galilei G2 and DRI Triton OCT were 11.77 ± 0.40 mm, 12.40 ± 0.43 mm, 12.25 ± 0.42 mm, and 12.42 ± 0.47 mm, respectively. All pairwise comparisons revealed statistically significant differences in mean HVID/WTW measurements (p = <0.01) except for the IOL Master 700-DRI OCT Triton pair (p = 0.56). Mean differences showed that the DRI Triton OCT produced the highest HVID/WTW values, followed by the IOL Master 700, Galilei G2 and Orbscan IIz, respectively. The limits of agreement were large on all device pairs. There was high repeatability for all devices (ICC ≥ 0.980). The highest repeatability was seen in the Galilei G2 (ICC = 0.995) and lowest in the Orbscan IIz (ICC = 0.980). CONCLUSIONS: The four devices exhibit high repeatability, but should not be used interchangeably for HVID/WTW measurements in clinical practice.

Repeatability and agreement of biometric measurements using spectral domain anterior segment optical coherence tomography and Scheimpflug tomography in keratoconus.

PURPOSE: To compare the repeatability and agreement in biometric measurements using Spectral Domain Anterior Segment OCT (AS-OCT, REVO-NX, Optopol) and Scheimpflug tomography (Pentacam-AXL, Oculus) in keratoconus. METHODS: Prospective case series at a university hospital tertiary center. Axial length (AL), anterior chamber depth (ACD), central corneal thickness (CCT), and thinnest corneal thickness (TCT) were measured using both devices in patients with keratoconus. Three groups were analyzed: eyes with no prior crosslinking or contact lens wear (Group A), eyes with prior crosslinking (Group B), and eyes with prior contact lens wear (Group C). Repeatability and agreement of measurements were analyzed. RESULTS: The study comprised of 214 eyes of 157 subjects. In Group A (n = 95 eyes), Group B (n = 86 eyes), and Group C (n = 33 eyes), intraclass correlation coefficient (ICC) was higher than 0.90 for all examined parameters, except for ACD readings in Group A with the REVO-NX (ICC = 0.83). Differences in ACD, TCT, and CCT were significantly different between the two devices for Groups A, B and C (p<0.05). AL measurements differed significantly in Groups A and B (p<0.05) but not in Group C (p = 0.18). Repeatability did not vary significantly between Groups A, B, or C in any parameter with both devices (p>0.05). There was poor agreement between the two devices across all parameters (p<0.05). CONCLUSIONS: Both devices demonstrated good repeatability but poor agreement across AL, ACD, CCT and TCT measurements. There was no significant difference in repeatability in virgin eyes compared to eyes with prior crosslinking or contact lens wear, however, the interchangeable use of the two devices is not recommended.

Application of biomimetic double-layer biofilm stent in arthroscopic rotator cuff repair: A protocol of randomized controlled trial.

BACKGROUND: Rotator cuff injury is the most common cause of shoulder dysfunction. Despite the continuous advancement of surgical techniques, the incidence of re-tearing after rotator cuff repair is still high. The main reason is that it is difficult to reconstruct the normal tendon bone interface and the process is slow, and the application of tissue engineering technology can promote tendon and bone healing. This study will evaluate the effect of the bionic double membrane stent on the rotator cuff healing after arthroscopic rotator cuff repair. METHODS: This is a prospective randomized controlled trial to study the effect of biomimetic double-layer biofilm stent on rotator cuff healing. Approved by the clinical research ethics committee of our hospital. The patients were randomly divided into 1 of 2 treatment options: (A) a biomimetic double-layer biofilm stent group and (B) a non-bionic dual-layer biofilm stent group. Observation indicators include: visual analog scale score, University of California Los Angeles score, American Shoulder & Elbow Surgeons score and Constant-Murley score. Data were analyzed using the statistical software package SPSS version 16.0 (Chicago, IL). DISCUSSION: This study will evaluate and evaluate the effect of the bionic double-layer membrane stent on the rotator cuff healing after arthroscopic rotator cuff repair. The results of this experiment will provide new treatment ideas for promoting rotator cuff tendon bone healing. OSF REGISTRATION NUMBER: DOI 10.17605/OSF.IO/FWKD6.

Identifications and classifications of human locomotion using Rayleigh-enhanced distributed fiber acoustic sensors with deep neural networks.

This paper reports on the use of machine learning to delineate data harnessed by fiber-optic distributed acoustic sensors (DAS) using fiber with enhanced Rayleigh backscattering to recognize vibration events induced by human locomotion. The DAS used in this work is based on homodyne phase-sensitive optical time-domain reflectometry (φ-OTDR). The signal-to-noise ratio (SNR) of the DAS was enhanced using femtosecond laser-induced artificial Rayleigh scattering centers in single-mode fiber cores. Both supervised and unsupervised machine-learning algorithms were explored to identify people and specific events that produce acoustic signals. Using convolutional deep neural networks, the supervised machine learning scheme achieved over 76.25% accuracy in recognizing human identities. Conversely, the unsupervised machine learning scheme achieved over 77.65% accuracy in recognizing events and human identities through acoustic signals. Through integrated efforts on both sensor device innovation and machine learning data analytics, this paper shows that the DAS technique can be an effective security technology to detect and to identify highly similar acoustic events with high spatial resolution and high accuracies.

Face and Body-Based Human Recognition by GAN-Based Blur Restoration.

The long-distance recognition methods in indoor environments are commonly divided into two categories, namely face recognition and face and body recognition. Cameras are typically installed on ceilings for face recognition. Hence, it is difficult to obtain a front image of an individual. Therefore, in many studies, the face and body information of an individual are combined. However, the distance between the camera and an individual is closer in indoor environments than that in outdoor environments. Therefore, face information is distorted due to motion blur. Several studies have examined deblurring of face images. However, there is a paucity of studies on deblurring of body images. To tackle the blur problem, a recognition method is proposed wherein the blur of body and face images is restored using a generative adversarial network (GAN), and the features of face and body obtained using a deep convolutional neural network (CNN) are used to fuse the matching score. The database developed by us, Dongguk face and body dataset version 2 (DFB-DB2) and ChokePoint dataset, which is an open dataset, were used in this study. The equal error rate (EER) of human recognition in DFB-DB2 and ChokePoint dataset was 7.694% and 5.069%, respectively. The proposed method exhibited better results than the state-of-art methods.

Deep Learning-Based Real-Time Multiple-Person Action Recognition System.

Action recognition has gained great attention in automatic video analysis, greatly reducing the cost of human resources for smart surveillance. Most methods, however, focus on the detection of only one action event for a single person in a well-segmented video, rather than the recognition of multiple actions performed by more than one person at the same time for an untrimmed video. In this paper, we propose a deep learning-based multiple-person action recognition system for use in various real-time smart surveillance applications. By capturing a video stream of the scene, the proposed system can detect and track multiple people appearing in the scene and subsequently recognize their actions. Thanks to high resolution of the video frames, we establish a zoom-in function to obtain more satisfactory action recognition results when people in the scene become too far from the camera. To further improve the accuracy, recognition results from inflated 3D ConvNet (I3D) with multiple sliding windows are processed by a nonmaximum suppression (NMS) approach to obtain a more robust decision. Experimental results show that the proposed method can perform multiple-person action recognition in real time suitable for applications such as long-term care environments.

Wrist Vascular Biometric Recognition Using a Portable Contactless System.

Human wrist vein biometric recognition is one of the least used vascular biometric modalities. Nevertheless, it has similar usability and is as safe as the two most common vascular variants in the commercial and research worlds: hand palm vein and finger vein modalities. Besides, the wrist vein variant, with wider veins, provides a clearer and better visualization and definition of the unique vein patterns. In this paper, a novel vein wrist non-contact system has been designed, implemented, and tested. For this purpose, a new contactless database has been collected with the software algorithm TGS-CVBR®. The database, called UC3M-CV1, consists of 1200 near-infrared contactless images of 100 different users, collected in two separate sessions, from the wrists of 50 subjects (25 females and 25 males). Environmental light conditions for the different subjects and sessions have been not controlled: different daytimes and different places (outdoor/indoor). The software algorithm created for the recognition task is PIS-CVBR®. The results obtained by combining these three elements, TGS-CVBR®, PIS-CVBR®, and UC3M-CV1 dataset, are compared using two other different wrist contact databases, PUT and UC3M (best value of Equal Error Rate (EER) = 0.08%), taken into account and measured the computing time, demonstrating the viability of obtaining a contactless real-time-processing wrist system.

Medical-Grade ECG Sensor for Long-Term Monitoring.

The recent trend in electrocardiogram (ECG) device development is towards wireless body sensors applied for patient monitoring. The ultimate goal is to develop a multi-functional body sensor that will provide synchronized vital bio-signs of the monitored user. In this paper, we present an ECG sensor for long-term monitoring, which measures the surface potential difference between proximal electrodes near the heart, called differential ECG lead or differential lead, in short. The sensor has been certified as a class IIa medical device and is available on the market under the trademark Savvy ECG. An improvement from the user's perspective-immediate access to the measured data-is also implemented into the design. With appropriate placement of the device on the chest, a very clear distinction of all electrocardiographic waves can be achieved, allowing for ECG recording of high quality, sufficient for medical analysis. Experimental results that elucidate the measurements from a differential lead regarding sensors' position, the impact of artifacts, and potential diagnostic value, are shown. We demonstrate the sensors' potential by presenting results from its various areas of application: medicine, sports, veterinary, and some new fields of investigation, like hearth rate variability biofeedback assessment and biometric authentication.

Comparación de los métodos de Willems I y Willems II en la estimación forense de la edad en niños venezolanos / Comparison of the Willems I and Willems II methods for forensic age estimation in Venezuelan children

INTRODUCCIÓN: El presente trabajo tuvo como objetivo comparar los métodos de Willems et al. (WI y WII) en la estimación forense de la edad en niños venezolanos. MATERIAL Y MÉTODOS: Esta investigación fue de tipo retrospectiva y observacional. Se emplearon 516 ortopantomografías de individuos de ambos sexos (6-18 años), se asignaron los estadios de maduración dental descritos por Demirjian et al. en los 7 dientes inferiores izquierdos, para luego determinar la edad dental (ED) mediante WI y WII. Se calculó la diferencia de media entre la edad cronológica (EC) y la ED estimada mediante una prueba «t» de Student para muestras relacionadas. RESULTADOS: Para el total de la muestra se observó la subestimación de la edad por ambos métodos (0,17+/-1,75 años), siendo la diferencia EC-ED estadísticamente significativa (p = 0,04). Considerando todos los grupos de edad, WII mostró la menor diferencia EC-ED (0,05 años+/-1,40) en el sexo femenino, mientras que para el masculino se encontró menor diferencia para WI (0,04+/-0,54 años). En una submuestra hasta los 16 años se evidenció una subestimación de la edad en el sexo femenino para WI (0,03+/-1,23 años) y una sobreestimación para WII (-0,18+/-1,24 años), en el sexo masculino ambos métodos sobreestimaron la edad (W1=-0,21+/-1,17; WII=-0,06+/-1,20 años). CONCLUSIONES: La precisión de los métodos varió de acuerdo al sexo y grupo de edad, sin embargo, ambos resultaron aplicables a la muestra estudiada

INTRODUCTION: The purpose of this study was to compare the methods of Willems et al., (WI and WII) in estimating the forensic age in Venezuelan children. MATERIAL AND METHODS: A retrospective and observational study was performed on 516 orthopantomographs of individuals of both genders (6-18 years) in order to evaluate the stages of dental maturation described by Demirjian et al. Using the dental age (DA) in the seven left inferior teeth, DA was calculated using the WI and WII methods. The mean difference between the chronological age (CA) and DA was calculated using a paired-sample t-Test. RESULTS: The under-estimation of age by both methods (0.17+/-1.75 years) was observed, with the CA-DA difference being statistically significant (P=.04). Considering all age groups, WII showed the smallest difference between CA-DA (0.05+/-1.40 years) in girls, while a smaller difference was found for WI (0.04+/-0.54 years)for boys. In a subsample up to the age of 16, there was an under-estimation of age in females for WI (0.03+/-1.23 years) and an over-estimation for WII (-0.18+/-1.24 years). In the males both methods over-estimated the age (W1=-0.21+/-1.17 years, WII=-0.06+/-1.20 years). CONCLUSIONS: The accuracy of the methods varied according to gender and age group: however, both were applicable to the studied sample

An Efficient Mobile-Healthcare Emergency Framework.

Mobile technologies are capable of offering individual level health care services to users. Mobile Healthcare (m-Healthcare) frameworks, which feature smartphone (SP) utilizations of ubiquitous computing made possible by applying wireless Body Sensor Networks (BSNs), have been introduced recently to provide SP clients with health condition monitoring and access to medical attention when necessary. However, in a vulnerable m-Healthcare framework, clients' personal info and sensitive data can easily be poached by intruders or any malicious party, causing serious security problems and confidentiality issues. In 2013, Lu et al. proposed a mobile-Healthcare emergency framework based on privacy-preserving opportunistic computing (SPOC), claiming that their splendid SPOC construction can opportunistically gather SP resources such as computing power and energy to handle computing-intensive Personal Health Information (PHI) with minimal privacy disclosure during an emergency. To balance between the risk of personal health information exposure and the essential PHI processing and transmission, Lu et al. presented a patient-centric privacy ingress control framework based on an attribute-based ingress control mechanism and a Privacy-Preserving Scalar Product Computation (PPSPC) technique. In spite of the ingenious design, however, Lu et al.'s framework still has some security flaws in such aspects as client anonymity and mutual authentication. In this article, we shall offer an improved version of Lu et al.'s framework with the security weaknesses mended and the computation efficiency further boosted. In addition, we shall also present an enhanced mobile-Healthcare emergency framework using Partial Discrete Logarithm (PDL) which does not only achieve flawless mutual authentication as well as client anonymity but also reduce the computation cost.

Recognizing Emotional Expression as an Outcome Measure After Face Transplant.

Importance: Limited quantitative data exist on the restoration of nonverbal communication via facial emotional expression after face transplant. Objective and noninvasive methods for measuring outcomes and tracking rehabilitation after face transplant are lacking. Objective: To measure emotional expression as an indicator of functional outcomes and rehabilitation after face transplant via objective, noninvasive, and nonobtrusive software-based video analysis. Design, Setting, and Participants: This single-center case-control study analyzed videos with commercially available video analysis software capable of detecting emotional expression. The study participants were 6 patients who underwent face transplant at Brigham and Women's Hospital between April 2009 and March 2014. They were matched by age, race/ethnicity, culture, and sex to 6 healthy controls with no prior facial surgical procedures. Participants were asked to perform either emotional expressions (direct evaluation) or standardized facial movements (indirect evaluation). Videos were obtained in a clinical setting, except for direct evaluation videos of 3 patients that were recorded at the patients' residences. Data analysis was performed from June 2018 to November 2018. Main Outcomes and Measures: The possibility of detecting the emotional expressions of happiness, sadness, anger, fear, surprise, and disgust was evaluated using intensity score values between 0 and 1, representing expressions that are absent or fully present, respectively. Results: Six patients underwent face transplant (4 men; mean [SD] age, 42 [14] years). Four underwent full face transplants, and 2 underwent partial face transplants of the middle and lower two-thirds of the face. In healthy controls, happiness was the only emotion reliably recognized in both indirect (mean [SD] intensity score, 0.92 [0.05]) and direct (mean [SD] intensity score, 0.91 [0.04]) evaluation. Indirect evaluation showed that expression of happiness significantly improved 1 year after transplant (0.04 point per year; 95% CI, 0.02 to 0.06 point per year; P = .002). Expression of happiness was restored to a mean of 43% (range, 14% to 75%) of that of healthy controls after face transplant. The expression of sadness showed a significant change only during the first year after transplant (-0.53 point per year; 95% CI, -0.82 to -0.24 point per year; P = .005). All other emotions were detectable with no significant change after transplant. Nearly all emotions were detectable in long-term direct evaluation of 3 patients, with expression of happiness restored to a mean of 26% (range, 5% to 59%) of that of healthy controls. Conclusions and Relevance: Partial restoration of facial emotional expression is possible after face transplant. Video analysis software may provide useful clinical information and aid rehabilitation after face transplant.

Cardiac conduction devices in the radiologic comparative identification of decedents.

Cardiac conduction devices (CCDs), including pacemakers and implantable cardioverter-defibrillators (ICDs), are implanted in a significant part of the population, especially as the population becomes older. CCDs play an important role in forensic medicine; they are a valuable identification tool as the manufacturer information and unique serial numbers of the device can be matched with the medical records of the person of suspected identity after the device has been removed from the body. Radiological examinations such as X-ray or computed tomography (CT) can illustrate specific CCD features. A series of 12 selected cases is presented to highlight the ability of postmortem CT to visualize CCD details, contributing to possible comparative radiological identification in the case of suspected identity without the requirement of invasive removal. To date, unique patient-specific serial numbers, which are usually not radiopaque, cannot be visualized by imaging. However, a positive match of specific CCD radiologic features combined with other peculiar body findings between ante- and postmortem images can lead to a pure radiologic comparative identification.

Ratiometric Impedance Sensing of Fingers for Robust Identity Authentication.

We present a novel biometric authentication system enabled by ratiometric analysis of impedance of fingers. In comparison to the traditional biometrics that relies on acquired images of structural information of physiological characteristics, our biological impedance approach not only eliminates any practical means of making fake copies of the relevant physiological traits but also provides reliable features of biometrics using the ratiometric impedance of fingers. This study shows that the ratiometric features of the impedance of fingers in 10 different pairs using 5 electrodes at the fingertips can reduce the variation due to undesirable factors such as temperature and day-to-day physiological variations. By calculating the ratio of impedances, the difference between individual subjects was amplified and the spectral patterns were diversified. Overall, our ratiometric analysis of impedance improved the classification accuracy of 41 subjects and reduced the error rate of classification from 29.32% to 5.86% (by a factor of 5).

Based Medical Systems for Patient's Authentication: Towards a New Verification Secure Framework Using CIA Standard.

In medical systems for patient's authentication, keeping biometric data secure is a general problem. Many studies have presented various ways of protecting biometric data especially finger vein biometric data. Thus, It is needs to find better ways of securing this data by applying the three principles of information security aforementioned, and creating a robust verification system with high levels of reliability, privacy and security. Moreover, it is very difficult to replace biometric information and any leakage of biometrics information leads to earnest risks for example replay attacks using the robbed biometric data. In this paper presented criticism and analysis to all attempts as revealed in the literature review and discussion the proposes a novel verification secure framework based confidentiality, integrity and availability (CIA) standard in triplex blockchain-particle swarm optimization (PSO)-advanced encryption standard (AES) techniques for medical systems patient's authentication. Three stages are performed on discussion. Firstly, proposes a new hybrid model pattern in order to increase the randomization based on radio frequency identification (RFID) and finger vein biometrics. To achieve this, proposed a new merge algorithm to combine the RFID features and finger vein features in one hybrid and random pattern. Secondly, how the propose verification secure framework are followed the CIA standard for telemedicine authentication by combination of AES encryption technique, blockchain and PSO in steganography technique based on proposed pattern model. Finally, discussed the validation and evaluation of the proposed verification secure framework.

A Facial Recognition Mobile App for Patient Safety and Biometric Identification: Design, Development, and Validation.

BACKGROUND: Patient verification by unique identification is an important procedure in health care settings. Risks to patient safety occur throughout health care settings by failure to correctly identify patients, resulting in the incorrect patient, incorrect site procedure, incorrect medication, and other errors. To avoid medical malpractice, radio-frequency identification (RFID), fingerprint scanners, iris scanners, and other technologies have been implemented in care settings. The drawbacks of these technologies include the possibility to lose the RFID bracelet, infection transmission, and impracticality when the patient is unconscious. OBJECTIVE: The purpose of this study was to develop a mobile health app for patient identification to overcome the limitations of current patient identification alternatives. The development of this app is expected to provide an easy-to-use alternative method for patient identification. METHODS: We have developed a facial recognition mobile app for improved patient verification. As an evaluation purpose, a total of 62 pediatric patients, including both outpatient and inpatient, were registered for the facial recognition test and tracked throughout the facilities for patient verification purpose. RESULTS: The app was developed to contain 5 main parts: registration, medical records, examinations, prescriptions, and appointments. Among 62 patients, 30 were outpatients visiting plastic surgery department and 32 were inpatients reserved for surgery. Whether patients were under anesthesia or unconscious, facial recognition verified all patients with 99% accuracy even after a surgery. CONCLUSIONS: It is possible to correctly identify both outpatients and inpatients and also reduce the unnecessary cost of patient verification by using the mobile facial recognition app with great accuracy. Our mobile app can provide valuable aid to patient verification, including when the patient is unconscious, as an alternative identification method.

RaspiReader: Open Source Fingerprint Reader.

We open source an easy to assemble, spoof resistant, high resolution, optical fingerprint reader, called RaspiReader, using ubiquitous components. By using our open source STL files and software, RaspiReader can be built in under one hour for only US $175. As such, RaspiReader provides the fingerprint research community a seamless and simple method for quickly prototyping new ideas involving fingerprint reader hardware. In particular, we posit that this open source fingerprint reader will facilitate the exploration of novel fingerprint spoof detection techniques involving both hardware and software. We demonstrate one such spoof detection technique by specially customizing RaspiReader with two cameras for fingerprint image acquisition. One camera provides high contrast, frustrated total internal reflection (FTIR) fingerprint images, and the other outputs direct images of the finger in contact with the platen. Using both of these image streams, we extract complementary information which, when fused together and used for spoof detection, results in marked performance improvement over previous methods relying only on grayscale FTIR images provided by COTS optical readers. Finally, fingerprint matching experiments between images acquired from the FTIR output of RaspiReader and images acquired from a COTS reader verify the interoperability of the RaspiReader with existing COTS optical readers.

A Wearable Wrist Band-Type System for Multimodal Biometrics Integrated with Multispectral Skin Photomatrix and Electrocardiogram Sensors.

Multimodal biometrics are promising for providing a strong security level for personal authentication, yet the implementation of a multimodal biometric system for practical usage need to meet such criteria that multimodal biometric signals should be easy to acquire but not easily compromised. We developed a wearable wrist band integrated with multispectral skin photomatrix (MSP) and electrocardiogram (ECG) sensors to improve the issues of collectability, performance and circumvention of multimodal biometric authentication. The band was designed to ensure collectability by sensing both MSP and ECG easily and to achieve high authentication performance with low computation, efficient memory usage, and relatively fast response. Acquisition of MSP and ECG using contact-based sensors could also prevent remote access to personal data. Personal authentication with multimodal biometrics using the integrated wearable wrist band was evaluated in 150 subjects and resulted in 0.2% equal error rate ( EER ) and 100% detection probability at 1% FAR (false acceptance rate) ( PD . 1 ), which is comparable to other state-of-the-art multimodal biometrics. An additional investigation with a separate MSP sensor, which enhanced contact with the skin, along with ECG reached 0.1% EER and 100% PD . 1 , showing a great potential of our in-house wearable band for practical applications. The results of this study demonstrate that our newly developed wearable wrist band may provide a reliable and easy-to-use multimodal biometric solution for personal authentication.

Biometrics: Accessibility challenge or opportunity?

Biometric recognition is currently implemented in several authentication contexts, most recently in mobile devices where it is expected to complement or even replace traditional authentication modalities such as PIN (Personal Identification Number) or passwords. The assumed convenience characteristics of biometrics are transparency, reliability and ease-of-use, however, the question of whether biometric recognition is as intuitive and straightforward to use is open to debate. Can biometric systems make some tasks easier for people with accessibility concerns? To investigate this question, an accessibility evaluation of a mobile app was conducted where test subjects withdraw money from a fictitious ATM (Automated Teller Machine) scenario. The biometric authentication mechanisms used include face, voice, and fingerprint. Furthermore, we employed traditional modalities of PIN and pattern in order to check if biometric recognition is indeed a real improvement. The trial test subjects within this work were people with real-life accessibility concerns. A group of people without accessibility concerns also participated, providing a baseline performance. Experimental results are presented concerning performance, HCI (Human-Computer Interaction) and accessibility, grouped according to category of accessibility concern. Our results reveal links between individual modalities and user category establishing guidelines for future accessible biometric products.

Parallel lensless compressive imaging via deep convolutional neural networks.

We report a parallel lensless compressive imaging system, which enjoys real-time reconstruction using deep convolutional neural networks. A prototype composed of a low-cost LCD, 16 photo-diodes and isolation chambers, has been built. Each of these 16 channels captures a fraction of the scene with 16×16 pixels and they are performing in parallel. An efficient inversion algorithm based on deep convolutional neural networks is developed to reconstruct the image. We have demonstrated encouraging results using only 2% (relative to pixel numbers, e.g. 5 for a block with 16×16 pixels) measurements per sensor for digits and around 10% measurements per sensor for facial images.